Homemade Cards & Gifts

Burst of color Card

2010-02-25T21:59:00.000-08:00

This multilayered card gets its good looks from a clever combination of transparent acetate and tempera paint.

Materials

* Photographs
* Tempera paint
* Brush
* Scissors

* Card stock
* Glue
* Strip adhesive

X

Instructions

1.

Choose a color or black-and-white photo with a lot of contrast and a light background (a dark one will print as black on the clear plastic acetate). Grab some tempera paint (we chose red) and a brush and head to your local copy shop. (Alternatively, you can make your master copy as described in step 2 using your home computer, then apply the paint to your black-and-white copy before going to the copy shop.)
2.

Make the master from which you'll create your cards (2 per sheet, as shown): ask the copy shop to use a black-and-white laser printer to print 2 copies of the photo, aligning the pictures one above the other on the right side of a sheet of white 8 1/2- by 11-inch paper. The left edge of the photos should be flush against the center line.
3.

While still at the copy shop, use the tempera paint to add a small detail, such as a bow or a scarf, to both photos on the master. Allow the paint to dry (5 to 10 minutes).
4.

Now have the copy shop color-copy the painted master on sheets of 8 1/2- by 11-inch acetate (they should have it in stock), trim off the borders and cut the sheets in two, and fold the cards for you. Finally, ask them to cut, trim, and fold an equal number of pieces of card stock to fit inside the acetate cards.
5.

At home, glue together the 2 parts of each card with a piece of strip adhesive (available in the scrapbooking section of craft stores) placed along the fold on the back of one of the cards. The finished greetings will fit into standard 5- by 6 1/2-inch envelopes.

Cost per 100 cards: about $130

Tips:
To cut the cost of these cards almost in half, skip step 3 and have the copy shop print the unpainted master on acetate in black and white. Then you can paint the cards individually at home (apply the paint to the back of the acetate), or simply send out the all-black-and-white version.

50 Homemade Gift Ideas

2009-05-21T20:09:00.000-07:00

Homemade gifts are some of the best gifts I give at Christmas. It makes the gift more personal and who doesn’t like to receive a homemade gift? I searched the web to find some of the best gifts to make. There are some wonderful craft projects in this list and I will be trying a few.

1. Homemade Holiday Ornaments: Lots of easy to do crafts. I especially like the picture ornaments and the baked clay snowman.

2. Create Your Own Heirloom Photo Ornament: This is just lovely, and definite on my list this year to make.

3. Make A Distressed Photo Frame: The distressed look is in, and would be a great gift for someone who enjoys that decor.

4. Make A Christmas Snow Globe: You could use this same technique to create a snow globe of any theme, not just for Christmas.

5. Chocolate Chip Cookie Mix In A Jar: Yum! A wonderful and simple gift to give.

6. Dog Biscuit Recipe: Can’t forget Fido. A great recipe for a yummy dog treat.

7. No Cook Food Gift Ideas: If you are short on time in the kitchen, here are some great gift ideas you can tie, wrap and basically just give.

8. Scented Potpourri: Recipes for Apple Spice, Regency Rose, and Summer Breeze.

9. Bead And Button Teacup: This teacup is for display purposes only, but it is a really cute craft that teens could make for teacher, mom, or grandma.

10. Make A Paper Bag Scrapbook: These scrapbooks are adorable and easy to make. You use paper bags as the album!

11. Decorative Dried Herbs In Oil: Make one of those fancy looking bottles!

12. Christmas Gifts From Your Kitchen: Some yummy recipes for delicious treats including Chocolate Billionaires (love the name); Swedish Nuts; Cinnamon Nut Mix; Mocha Walnuts; and Sugared Peanuts.

13. Make Your Own Garden Stepping Stones: We’ve done this for our yard but used the kits you buy at the store. I like this version better.

14. Personalized Towels: These do not require any sewing. You could use this technique to personalize almost any item.

15. Gifts In A Jar: There were just too many to choose from so here is the entire page. Many wonderful and easy gifts to make in a jar.

16. Fleece Blanket: Directions for how to make a no-sew snuggy fleece blanket.

17. Make An Altered Lunch Box: This is one of the newer craft techniques, using scrapbooking tools.

18. Craft Foam Christmas Ornaments: These are perfect to give as a gift or keep some for your own decorating

19. Make Gel Candles: Gel candles are very popular and a great gift idea. Here are the instructions so you can make your own.

20. No sew Sachet: Even the littlest kids can help to make this one.

21. Make A Friendship Bracelet: Great for teens or tweens. Get directions for how to make a friendship bracelet.

22. Christmas Pot Holder: Who wouldn’t love this adorable home made pot holder? You could make this in a non seasonal theme as well.

23. Folk Rag Doll: Great to give a little girl or for anyone who enjoys dolls.

24. Make Your Own Butterfly House: This is a great gift idea for some of the older kids. Directions are for making the house and for the food the butterfly needs.

25. Make a Kite: Even if it is not kite flying weather, a kite can be used as a decoration for a kid’s room!

26. Mr. Bean Style Teddy Bear: This is a knitting project and looks a bit harder for this non-knitter. I included it here in case any knitters want to do this. It is adorable!

27. Sock Monkey: These are priceless and they do not look too complicated to make. This is a sewing based craft and you’ll need a pair of men’s extra large white socks.

28. Washcloth Puppets: I love these! Directions are given how to make a cow, bunny, or bear. They are all cute and I would have a difficult time choosing which one to make.

29. Broomstick Skirt: These are really in style now. Would be a great gift to give a teen or for a teen to make.

30. Make a Classic Tote: Who doesn’t need a tote bag. Very versatile.

31. No Sew Quilt: Really simple quilt idea. YOu could make this with a Christmas theme or any other theme you desired.

32. Make a Doll House Out Of Cardboard Box: Step by step directions to make a doll house using a simple cardboard box. Then check out the ideas for making doll house furniture.

33. Make A Kitchen Apron: A perfect gift for those who love to cook!

34. Create a Tie Dye T-Shirt: This looks to be a little bit messy but tie dye crafts are a hit.

35. Make An Advent Calendar: A gift to give as the Christmas season begins.

36. Fabric Ponchos. You could make a few in different colors. These are made of fleece and don’t require any sewing.

37. Kitchen Towel Pillow Covers: What a great way to quickly and inexpensively make some really cut pillows.

38. Clay Pot Snowmen: These are so adorable and are really easy to make.

39. Homemade Beaded Candles: Look just like those really expensive ones in the store.

40. Make A Vest For Your Dog: This is a resizeable pattern, good for a poodle or lab!

41. Crosstitch A Heart Bookmark: This is an adorable bookmark and would make a wonderful gift for the book lover!

42. Coat Hanger Covers: These are sewn and you could make a set of them to give as a very practical and pretty gift.

43. Cell Phone Case: Sew your own so the options are endless!

44. American Girl Doll Dress: This pattern is for any 18 inch doll and is a drop waist dress. Lots of combinations are possible using this pattern.

45. DishTowel Angel: Really cute and only needs one dish towel, one dish cloth, and one potholder.

46. Make a Personalized Calendar: Free printable templates to make your own calendar for 2007.

47. Gingerbread Gifts: Love the smell of gingerbread! Here are several crafts which feature gingerbread. Patterns for gingerbread people, trees, and other shapes. Make a gingerbread garland too!

48. Beaded Napkin Rings: These are so cute and even though they are a “kid craft” I think anyone would enjoy receiving these as a gift.

49. Holly Jolly Cardinal Wall Hanging: This is a quilt project, and a little bit more advanced. However, it is a beautiful quilt and would make a very nice Christmas gift.

50. Vine Wall Hanging: This project looks to be simple but very nice with a country flair!

Homemade Holiday Ornaments

2009-02-17T20:11:00.000-08:00

Homemade
Holiday Ornaments

>
"Marble"ous Balls

>
Beaded Star

>
Paint Stick Snowman

>
Baked Clay Snowman

>
Wire Star

>
Picture Ornament

>
Craft Stick Snowflake

>
Tin Punch Heart

>
Glittery Pine Cones

"Marble"ous
Balls

Submitted
by Janice McClure, Lawrence 2nd Ward, Topeka KS Stake, USA

SUPPLIES:

-Clear, glass ball ornaments

-Acrylic craft paint

-Ribbon

-Egg carton

1.
Open the glass bulb and squirt two-three-different types of
acrylic paint into it.

2.
Swirl the paint around in the bulb by rotating the bulb with
your hands.

3.
Let dry in an egg carton.

4.
When dry, add toppers and tie a ribbon onto them.

Beaded
Star

Submitted
by Kathleen Gordon-Ross, Lawrence 2nd Ward, Topeka KS Stake,
USA

SUPPLIES:

-1 pkg. Yellow Indian seed beads (small or large)

-Thin craft wire

-Medium size star cookie cutter

-1 pkg. ornament hooks

-Needle nose pliers or wire cutters

1. Cut a length of wire long enough to shape around your star
cookie cutter.

2.
Gently shape wire around cookie cutter € bending the general
shape of the star into the wire.

3.
Place beads in a cereal bowl and string on wire entire length
of star.

4.
Twist and bend both ends closed to prevent puncture wounds.

5.
Reshape or define the shape of your star if needed. Add ornament
hook and start your next star!

Don't have star cookie cutter, draw a star on heavy paper,
cut it out and use it as your template.

Paint
Stick Snowman

Submitted
by Kathleen Gordon-Ross, Lawrence 2nd Ward, Topeka KS Stake,
USA

SUPPLIES:

-1
paint stick (yield 2 ornaments)

-Craft paint (black, white, red, orange (optional))

-Scrap fabric or ribbon for scarf - 1/4" x 7" for
each

-Hot glue gun or craft glue

-Drill

-Thread, fishing line, DMC floss

1. Cut paint stick into two 5-1/2" long. Use the remaining
length of wood to cut 2 hat brims (appx 1/4" x 2").

2.
Paint top 1-1/4" of each 5-1/2" piece (a.k.a. snowman)
black; paint the hat brims (1/4" x 2") black. Paint
remaining portion of the snowmen body white. Allow paint to
dry.

3.
Using a hot glue gun or craft clue, glue hat brim to snowman
covering where the black and white paint meet. Allow glue
to set.

4.
Using a small paint brush or toothpick, add eyes and mouth
(black), nose (red or orange) and buttons (red hearts or circles,
or use real buttons).

5.
Using a very small drill bit, drill a hole in the top of your
snowman‚s hat (1/4 " down from top edge, centered)
to string your tread for hanging.

6.
Tie the fabric or ribbon scarf around the snowman‚s neck
€ secure with glue if needed.

VARIATION: Snowman
Door Hanger

SUPPLIES:

-1/4 " plywood

-1-1/2"x9" snowman body

-1/2"x3" €hat brim

-Craft paint (black, white, red, green)

-Scrap fabric or ribbon €1/2" x 10"

-Hot glue gun

-Saw

-Twine

-Mini jingle bless

-Mini pine wreath (3" diameter - fake)

-Wire cutters

1. Paint top 1-3/4" of snowman black; paint hat brim
black. Paint remaining portion of the snowman's body white.
Allow paint to dry.

2.
Using wire cutters, cut one sprig from mini wreath (should
be about 1" long). Glue pine sprig to lower black portion
of the hat so that once the brim is glued on it looks like
it's sticking out of the brim. Glue hat brim to hat, being
sure to cover the paint seam and bottom of pine sprig. Add
jingle bell (or red holly berry) with dab of glue where the
pine spring and the hat brim meet.

3.
Paint on face and either paint or glue buttons on the snowman's
belly.

4.
Tie scarf around his neck and if necessary tack with small
dab of glue. Allow everything to set/dry.

5.
Cut 10" piece of twine, fold in half. Turn snowman over
and glue cut ends of the twine to the back of the snowman's
hat.

Baked
Clay Snowman

Submitted
by Lori Garcia, Lawrence 2nd Ward, Topeka KS Stake, USA

SUPPLIES:

-Various colors of polymer clay

-Paperclip

-Rolling pin, jar, or pasta machine (for rolling out the clay)

-Clear gloss spray

-Permanent, fine-tip pen

-Decorative scrapbook scissors

-Straight pin

-Table knife

-Large circle punch

-Thread (any color-for cutting clay)

THE
BACKGROUND

1.
Roll green polymer clay into a thin sheet using either the
rolling pin, jar, or pasta machine.

2.
Using the large circle punch, punch out a circle. If you do
not have a large circle punch, you can use any number of circle-drawing
tools, templates, or you can just trace a round object like
a glass and cut out with scissors.

2.
Roll white polymer clay into a thick sheet. Place green circle
of clay on the white sheet and cut around the green circle
with decorative scrapbook scissors.

3.
Use a straight pin to stab holes around the decorative border
and on the green circle of clay.

THE
SNOWMAN'S BODY AND HEAD

4.
Using the white clay, roll into a ball about the size of a
quarter. Using the thread, cut the ball into two halves. One
of the halves will serve as the snowman's body.

5.
Repeat step four with a slightly smaller ball of white clay,
about the size of a nickel. One of the halves will serve as
the snowman's head. Using the thread, cut a crescent out of
the half so you have a place for the hat. Place both body
and head of the snowman on the green circle of clay in the
background.

THE
HAT

6.
Using red clay, make a cone the right size for the snowman's
hat. Cut the cone in half using the thread and set aside.

7.
With the white clay, make a snake about two "es long
and about the thickness of flower stem. Using the rolling
pin, jar, or pasta machine, roll the snake flat. This is the
trim of the hat. Lay the flatten snake over the red hat and
trim off excess. Using straight pin to stab the trim of the
hat too create a fluffy-like texture.

8.
Roll a small ball of white clay to make the hat's pom pon.
Use the straight pin to texturize it too to look fluffy.

9.
Place the hat (with trim) and pom pon on the green background
above the snowman.

EYES,
NOSE, and MOUTH

10.
Roll black clay into a small ball the size of a seed bead.
Using the thread, cut the ball in half. Place both halves
on the snowman's head for eyes.

11.
Using orange clay, make a small cone the right size for the
snowman's carrot nose. Use the straight pin to score the carrot
giving it appropriate horizontal lines. Place carrot nose
on snowman's head.

12.
Draw on a smile for the snowman using the straight pin.

BOW
TIE AND BUTTONS

12.
Roll a small block of blue clay. Cut the block diagonally
to create two triangles. Place the triangles on the snowman's
body to create a bow tie. Roll a small ball of blue clay for
the center of the tie. Smoosh it into place on the body of
the snowman.

13.
Roll one tiny ball of black clay. Slice with thread and attach
to snowman's body for buttons.

MITTENS

14.
Roll one red ball the size of a nickel. Slice with thread
into two halves.

15.
Taking one of the halves round-side up, slightly p" one
end to make it slight smaller to create the mitten. Take the
straight pin and slightly dent in the opposite side to create
the thumb.

16.
Make a small red snake about the thickness of a flower stem
and flatten it as in step #7. Cut the flatten red snake to
fit around the mitten as the cuff. Make vertical lines in
the cuff to give it texture.

17.
Repeat steps #15 and #16 for second mitten. Attach both mittens
to ornament.

SKATES

18.
Roll a nickel-size black clay into a ball. Slightly flatten
the ball into a shape in between a ball and a pill. Slice
in half with thread. Place shoes on ornament.

19.
Roll out a small square of gray clay for the skate. Slice
into two rectangles and add to ornament. Unfold paperclip
and reshape into a hook. Stick the hook in the clay ornament.

20.
Placed finished ornament on cookie sheet and bake for 20 minutes
in a 275 degree oven. Let cool.

21.
Using permanent marker, write family name and year on ornament.

22.
Spray with clear gloss and let dry.

Wire
Star

Submitted
by Lisa James, Salem Ward, St. John Arizona Stake, USA

SUPPLIES:

-5 " x 5 " scrap of 1 " thick wood

-10 - 1 " brads ( these are thin, small head nails)

-Hammer

-Needle nose pliers/wire cutter

-Star pattern

-18, 19 or 20 gage wire

-Ribbon of your choice

-Spray paint, color of your choice

1.
Place the star pattern, centered on the piece of wood. Pound
the brads into the wood at each point of the star, both exterior
and interior points.

2. Cut two
pieces of wire to 60 inches or measure out at arms length
across your body.

Take one cut wire and twist to make a small loop near the
center. Twist again to make secure.

Place the loop above the nail that will be the top point of
the star. The twisted part should sit
directly above the nail and the two ends of the wire come
down on either side of it.

Take the right wire and begin weaving the wire in and out
of the nails following the star pattern. This will go around
about two times. Tuck the end piece under the wire star.

Repeat the above for the left side, only in the opposite direction
as the first.

You have created the star base.

3.
Carefully remove the wire star base from the nails. Be careful,
the wire will want to spring apart. Use the needle nose pliers
to wrap both end pieces around the star base to secure.

Take the other cut piece of wire and with one end wrap about
one " securely around all the wire in a small section.
This will secure the wire you are working with and the star
base.

4. Begin wrapping
this second wire around the outside of the star base from
corner to corner and around the arms. Each arm needs to be
wrapped at least two times.

Step back and look at it once or twice while wrapping to make
sure you haven‚t left out an area.

When you are down to about an inch and a half of wire, wrap
it securely around a small section of the base. Use the needle
nose pliers to turn back any sharp ends.

5. Using spray
paint, paint the stars according to the directions on the
can.

6. When dry,
thread a ribbon through the star‚s top loop. Tie a bow
with the ends to make a loop to hang the star on the tree.

TIPS:

-Colored wire is also available at craft stores if you want
to skip the painting part.

-Also, try adding fine glitter to the stars for a sparkly
effect.

-You can also try using heavier gage wire with a larger star
pattern for bigger stars. These maybe too heavy to hang on
the tree, but look great hanging in windows, on the mantel
and from the eaves of the house.

-Experiment and have fun.

Picture
Ornament

Submitted
by Kathleen Gordon-Ross, Lawrence 2nd Ward, Topeka KS Stake,
USA

SUPPLIES:

-Photos

-Acid-free card stock

-Scissors

-Circle cutter or circle template

-Acid-free tape

-Lamination paper

-Hole punch

-Ribbon

1. Trace a
circle onto the photo and cut out. If you have a circle cutter,
you could use it too.

2. Mount photo
on different color card stock and trim circles.

3. Laminate
and punch a hole in the top.

4. Tie a ribbon
for a hanger.

Craft
Stick Snowflakes

Submitted
by Kathleen Gordon-Ross, Lawrence 2nd Ward, Topeka KS Stake,
USA

SUPPLIES:

-Skill Craft Sticks

-White craft paint

-Clear craft paint with glitter

-Hot glue gun or craft glue.

-Fishing line

1. Paint front and back of three skill craft sticks with white
paint; allow to dry.

2.
Paint again with glitter paint; allow to dry.

3.
Glue center of sticks together as show in picture. Either
tie a length of fishing line to one end of the snowflake and
secure with a dab of glue; or drill a very small hole in one
end and tread the fishing line through, tying loose ends to
create loop.

Tin
Punch Heart

Submitted
by Kathleen Gordon-Ross, Lawrence 2nd Ward, Topeka KS Stake,
USA

SUPPLIES:

-Wide Mouth Kerr/Mason Jar lids

-Small heart template (cut from 3x5 card)

-Small roll of Scotch tape or double-sided sticky tape

-Medium penny nail - you don‚t want anything that‚s
too fat around. Penny nails tend to be long and skinny, perfect
for t his project.

-Hammer

-Old phone book, stack of newspapers or a couple sheets of
corrugated board

-Red 1/8"craft ribbon

1. Secure heart template to the top of jar lid--I tend to
center it over the embossed KERR/MASON with a small roll of
Scotch tape or a square of double-sided tape. A heart measuring
2" wide and 1-3/4" tall fits perfectly inside the
lid.

2.
Carefully tap the nail through the lid (be sure to do this
on top of an old phone book, etc so you don't damage your
work surface), spacing your holes evenly around the heart.

3.
Punch an extra hole to the top of the lid to tread your ribbon
through. Tie off the ribbon and hang on the tree.

Glittery
Pine Cones

Submitted
by Lori Garcia, Lawrence 2nd Ward, Topeka KS Stake, USA

SUPPLIES:

-Various pine cones

-White craft glue

-Paint brush

-Glitter

-String or ribbon to hang the ornament

1.
Paint the top of the pine cone edges with white craft glue.

2.
Sprinkle glitter on top.

3.
Tie a string or ribbon around the top edges and hang.

Christmas
Tree Embroidery

Submitted
by Heather Hales, Tempe Ward, Tempe Arizona Stake, USA

SUPPLIES:

-1 white onsie

-Green embroidery floss

-Yellow embroidery floss

-Brown embroidery floss

-Scissors

-Needle

-Ruler

1.
Find the center of your onsie and determine how far across and down
you want the trees to go. Mark the fabric where you want to place
the trees.

2. With green
floss, make one straight stitch for the length of the tree and then
begin making the boughs of the tree.

3.
The tree trunk is done in three satin stitches. (Three stitches
of equal length done right next to each other.)

4. The “star”
atop the tree is really a French knot.

OTHER VARIATIONS:

• Instead of trees do snowflakes

• If you are more advanced try snowmen

• Yellow or gold stars

• Try the embroidery project on a tote bag, apron, jumper,
etc.

Fun
Holiday Crates

Submitted
by Mindy Bash, Lawrence 2nd Ward, Topeka Kansas Stake, USA

Use
rub-ons to create fun holiday decor in a snap.

SUPPLIES:

-Wooden crate

-Rub-on

-Craft paint

-Raffia

1. Choose the
rub-on that will fit your crate.

2. Paint crate
with craft paint and let dry.

3.
Rub on the rub-on decoration.

4. Tie on raffia
for cute country charm.

Holiday
Berry Wreath

Submitted
by Lori Garcia, Lawrence 2nd Ward, Topeka Kansas Stake, USA

These
fun faux berry wreaths are easy to make and festive to hang on any
front door.

SUPPLIES:

-1
hay wreath

-12-16 bunches of red faux berries

-Hand full of green faux leaves

-3 faux apples

-5 inches of ribbon to hang the wreath

-Hot glue gun

-Pliers

-Scissors

1.
Cut all berries apart using either the pliers or scissors so that
you have small strands.

2.
Dap a little glue on the hay wreath.

3.
Stick the strand into the hay wreath while passing through the glue.

4.
Repeat these process until the entire wreath is covered except for
the very top.

5.
In the remaining portion, glue down the leaves with hot glue.

6.
Glue on the apples in the center of the leaves.

7.
Turn the wreath over and hot glue the ribbon on to use as a hook.
Let dry.

Now
you're ready to hang.

Embossed
Velvet

Table Runner

Submitted
by Lori Garcia, Lawrence 2nd Ward, Topeka Kansas Stake, USA

SUPPLIES:

-1 yard acetate
velvet (or you may need more depending on your table length.)

-Coordinating thread, tassels, cording and other sewing notions
to your taste.

-Rubber stamp (special ones that are made to withstand the heat
are found at.)

-iron

-spray bottle

1.
Place rubber-stamp on a flat surface with rubber part facing up.
(Note, to get better results, you'll want to use a larger stamp
with fewer fine details. Also, make sure the stamp can stand up
to the heat of a hot iron. We stamped an entire yard of fabric with
a lot of coverage. After an hour and a half, the glue from the rubber-stamp
started to lose its hold and caused the rubber to slide around on
the wood block. We could still continue, but we had to be careful.
If you want heavy-duty rubber stamps, you might want to check out
the following website that sells rubber-stamps just for that purpose:
www.hotpotatoes.com)

2. Place the
velvet right-side down so that the good side is facing the rubber-stamp
and the backside is facing you (up). * Note, it's important to use
real acetate velvet and not velveteen or a substitute.

3. Using the
water bottle, spritz the fabric (the wrong-side) lightly to moisten
it.

4.
Place a heated iron directly on top of the fabric and count to five,
applying light pressure. *Note, make sure that you have the iron
on the highest setting WITHOUT steam. ALSO, make sure that you place
the iron so that the holes are not directly on top of your rubber-stamp.
The holes will leave their own embossing!

5.
Remove the iron and pick up the fabric to see the embossing you've
created.

6.
Continue to emboss as much of the fabric as you want. It took us
two hours to do a yard of fabric. You can choose to emboss a pattern
rotating the stamp ever which way, in rows, or along an edge for
added detail.

7. Measure the
length of the table you want to make the runner. Add 10-15 inches
extra so that the runner falls nicely over each side of the table.
We cut our fabric 65 inches long and 15 inches wide. Our fabric
wasn't long enough for our table, so we had to make a seam down
the middle of runner along the width. We weren't too concern with
the seam, because we had plans to cover the middle of the runner
with a large candle/pine cone centerpiece.

8. Hem the
runner all the way around about 1/4 inch.

9.
Turn the ends of the runner in to a point (you will tack these down
later by hand.)

10.
If you like cording, pin it along the underside of the hem you just
created. Sew the cording on by machine, or do a slip stitch by hand.
We did ours by machine, or course lazy ole me!

11.
The final touches? Tack the corners of each end down as mentioned
before. Hand stitch the tassels to the end of the runner for a completed
look.

Candy
Balls

Submitted
by Jill Putnam, Lawrence 2nd Ward, Topeka Kansas Stake, USA

Hang
them on a door knob, from the mantle, or anywhere you want to have
holiday cheer.

SUPPLIES:

-1 bag of gum drops or candy canes

-1 Styrofoam ball

-1 straight pin

-1 red hot

-Hot glue gun

1. Cover a four
inch Styrofoam ball with gumdrops, candy cane pieces, or any festive
holiday candy, using hot glue.

2. Loop ribbon into a bow with two larger loops for hanging.

3. Push ribbon
into Styrofoam with straight pin. Add hot glue for extra strength.

4. Use a small
piece of candy, like a red hot, to cover the pin mark.