In the Pink, Designs by Cathryn

VAMPIRE KitKat TREAT BOX using WEB of FUN BUNDLE - Stampin' Up!

2026-09-09T08:00:00.000-04:00

Hi Friends!My project today is a box for a Vampire Twix Bar. The box measures 4 1/4 x 2 x 3/4". I used the Web of Fun stamp set & dies Bundle and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized:

7 x 6 3/4"

I scored the 7" side at:

3/4, 1 1/2, 3 1/2, 4 1/4 and 6 1/4"

I scored the 6 3/4" side at:

1/2, 1 1/4, 5 1/2 and 6 1/4"

To cut and put the box together you can watch My Video Tutorial Here!

I attached the front piece of DSP onto the box last after I wound Black Iridescent ribbon around the left short side of the box and tied a bow at the top.

I attached several pieces of Frightfully Fun Designer Series Paper to the box.

(3) 4 x 1 3/4" front and back of flap, back

(2) 4 x 1/2" long sies

(2) 1/2 x 1 3/4" short sides

I stamped the Spider onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out and colored it with a Dark Smokey Slate Stampin' Blend.

I cut the word "HALLOWEEN" out of Basic Black Cardstock and Pumpkin Pie DSP using the Web of Fun dies.

I attached them together, Pumpkin Pie DSP on top, with Liquid Glue.

I slipped the Spider into the H and attached both pieces to the front of the box with Liquid Glue.

I cut the word "Night" out of Granny Apple Green Cardstock using the Web of Fun dies. I attached it below the end of "HALLOWEEN" with Liquid Glue.

I added some Wink of Stella glitter to the Spider and for the final touch I added 5 Timid Tiger Sunset Sparkle Sequins to the "HALLOWEEN".

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Web of Fun stamp set & dies Bundle

Frightfully Fun Designer Series Paper

Pumpkin Pie Cardstock

Basic Black Cardstock

Basic White Cardstock

Tuxedo Black Ink

Dark Smokey Slate Stampin' Blend

Wink of Stella

Black Iridescent Ribbon

Sunset Sparkle Sequins

Liquid Glue

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today. I hope you enjoyed my Halloween Treat Box.

See you next time!

Hugs,

Cathryn

SPOOKY HALLOWEEN TREAT BOX using WEB OF FUN BUNDLE - Stampin' Up!

2026-09-02T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween treat box that measures 3 x 5 1/2 x 1 1/4". I used the Web of Fun stamp set & dies Bundle and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Granny Apple Green Cardstock sized:

9 x 7"

I scored the 9" side at:

1 1/4, 4 1/4, 5 1/2 and 8 1/2"

I scored the 7" side at:

1 1/4, 5 1/4 and 6 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Frightfully Fun Designer Series Paper to the box.

(2) 2 3/4 x 3 3/4" front and back

(2) 1 x 3 3/4" long sides

(1) 2 3/4 x 1" bottom

(2) 2 3/4 x 3/4" front and back top

I cut the word "HALLOWEEN" from Gorgeous Grape Cardstock and the Spider Web from White Glitter Paper using the Web of Fun dies.

I cut the Web in half and attached half to the left/front of the box with Liquid Glue.

I cut a 1 3/4 x 3 3/4" piece of orange Frightfully Fun DSP and attached the HALLOWEEN" onto it with Liquid Glue.

I stamped the Spider onto Basic White Cardstock with Tuxedo Black Ink.

I cut the Spider out and colored it with a Dark Smokey Slate Stampin' Blend.

I cut out the Label from Granny Apple Green Cardstock using the Web of Fun dies.

I stamped the sentiment onto the Label using Tuxedo Black Ink.

I attached the DSP with HALLOWEEN on it to the right side of the box front with Dimensionals.

I attached the Spider to the left side with Dimensionals.

I attached the Label under the Spider with Dimensionals.

I punched 2 sets of holes into the top flaps with a 1/8" Hole Punch.

I ran Timid Tiger Faux Linen Ribbon, now retired, through the holes and tied a bow at the front.

For the final touch I added 3 Black Dots around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Web of Fun stamp set & dies Bundle

Frightfully Fun Designer Series Paper

Granny Apple Green Cardstock

Gorgeous Grape Cardstock

White Glitter Paper (retired)

Basic White Cardstock

Tuxedo Black Ink

Dark Smokey Slate Stampin' Blend

Timid Tiger Faux Linen Ribbon (retired)

Adhesive Bats, Ghosts and Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog today. I hope you enjoyed my Halloween Box.

See you next time!

Hugs,

Cathryn

BEAUTIFUL SQUARE TREAT BOX using RADIANT SUNFLOWERS BUNDLE - Stampin' Up!

2026-09-01T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a square treat box that measures 3 1/2 x 3 1/2 x 1". I used the Radiant Sunflowers stamp set & dies Bundle, Tile Garden dies and Sunflower Fields Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Cajun Craze Cardstock sized:

9 1/2 x 7 1/2"

I scored the 9 1/2" side at:

1, 4 1/2, 5 1/2 and 9"

I scored the 7 1/2" side at:

1, 4 1/2 and 5 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Sunflower Fields Designer Series Paper to the box.

(2) 3 1/4 x 3 1/4" front and back

(4) 3 1/4 x 3/4" sides

(2) 3 1/4 x 1 3/4" front and back of flap

I stopped the Flower onto Basic White Cardstock with Tuxedo Black Ink.

I cut a 2 3/4" square from Very Vanilla Cardstock using the Tile Garden dies.

I stamped the sentiment to the lower right with Cajun Craze Ink.

I added the Butterfly above the sentiment with Tuxedo Black Ink.

I colored the Flower and Butterfly with Stampin' Blends:

Light & Dark Old Olive - Leaf

Light & Dark Golden Glow - Flower

Light and Dark Daffodil Delight - Butterfly

I cut the Vase from Sunflower Fields Designer Series Paper and attached the Flower to the back with a Dimensional.

I attached the Flower and Vase next to the sentiment and Butterfly with Dimensionals.

I added a 3/8" adhesive Velcro Dot to the back flap for the clousure.

I ran Mossy Meadow Gingham Ribbon under the flap and tied a bow at the top.

I cut another piece of DSP to a 2 3/4" square.

I attached the square to the box with Liquid Glue.

Then I attached the Very Vanilla square not top with Dimensionals.

For the final touch I added 3 Mossy Meadow Moody Palette Glossy Dots onto the Vase and above the Butterfly.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Radiant Sunflowers stamp set & dies Bundle

Tile Garden dies

Sunflower Fields Designer Series Paper

Cajun Craze Cardstock

Very Vanilla Cardstock

Basic White Cardstock

Tuxedo Black Ink

Cajun Craze Ink

Stampin' Blends

Mossy Meadow Gingham Ribbon

3/8" Adhesive Velcro Dots

Wink of Stella

Moody Palette Glossy Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today. I hope you enjoyed my box.

See you next time!

Hugs,

Cathryn

FALL DOUGHT TREAT BOX using PAINTED PUMPKINS - Stampin' Up! *

2026-08-26T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a box for some Fall Scented Dough I got from Dollar Tree. The box measures 2 1/4 x 4 1/2 x 2". I used the Painted Pumpkins stamp set, Stylish Shapes dies, Scalloped Blooms dies and Sunflower Fields Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized:

9 x 6 3/4"

I scored the 9" side at:

2, 4 1/4, 6 1/4 and 8 1/2"

I scored the 6 3/4" side at:

2, 4 1/2 and 6"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Sunflower Fields Designer Series Paper to the box.

(2) 2 x 2 1/4" front and back

(2) 1 3/4 x 2 1/4" sides

(2) 2 x 1 1/4" upper front and back

I stamped the sentiment onto one of the 2 x 1 1/4" pieces of with Pumpkin Pie Ink before I attached it to the front of the box.

I stamped the Pumpkin and Leaves onto Basic White Cardstock with Tuxedo Black Ink.

I stamped another Stem, from the Pumpkin stamp, onto Basic White Cardstock with Old Olive Ink.I fussy cut the images out by hand.

I colored the images with Stampin' Blends.

Dark Pumpkin Pie - Pumpkin

Light Old Olive - Leaves

I cut out a 2 1/8" Scalloped Circle from Pumpkin Pie Cardstock using the Scalloped Blooms dies.

I cut a 1 3/4" circle from Basic White Cardstock using the Stylish Shapes dies.

I attached the circles together with Liquid Glue.

I attached the Vine to the Pumpkin with Liquid Glue.

I attached the Pumpkin to the circles with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I punched 2 sets of holes in the top flaps with a 1/8" Hole Punch.

I ran Mossy Meadow Gingham Ribbon through the holes and tied a bow at the front.

I punched 2 sets of holes in the top flaps with a 1/8" Hole Punch.

I ran Mossy Meadow Gingham Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 Old Olive Moody Palette Glossy Dots around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Painted Pumpkins stamp set

Scalloped Blooms dies

Stylish Shapes dies

Sunflower Fields Designer Series Paper

Pumpkin Pie Cardstock

Basic White Cardstock

Tuxedo Black Ink

Old Olive Ink

Pumpkin Pie Ink

Mossy Meadow Gingham Ribbon

Moody Palette Glossy Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Corner Rounder

Thank you for visiting my Blog today. I hope you enjoyed my Pumpkin Box.

See you next time!

Hugs,

Cathryn

FALL CANDY CORN TREAT BOX using FUN FOR FALL BUNDLE - Stampin' Up! *

2026-08-25T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures 3 x 4 x 1". I used the Fun For Fall stamp set & dies Bundle, Sunflower Fields Designer Series Paper and Stampin' Blends.
You can watch My Video Tutorial Here!

I started with a piece of Cajun Craze Cardstock sized:

8 1/2 x 8"

I scored the 8 1/2" side at:

1/2, 3 1/2, 4 1/2 and 7 1/2"

I scored the 8" side at:

1, 5 and 6"

To cut and put the box together you can watch My Video Tutorial Here!

I attached several pieces of Sunflower Fields Designer Series Paper to the box.

(2) 2 3/4 x 3 3/4" front and back

(2) 3/4 x 3 3/4" long sides

(2) 2 3/4 x 3/4" short sides

(2) 2 3/4 x 1 3/4" front and back of flap

I stamped the Scarecrow, two Hay Bales and the Flag onto Basic White Cardstock with Tuxedo Black Ink.

I cut them out with the matching dies and colored them with Stampin' Blends.

Light Petal Pink - Face

Light Bubble Bath - Cheeks

Dark Cajun Craze - Hat Bank, Patches and Scarf

Light Pecan Pie - Hat, Label, Pole, Hay Bale Straps and Flap Pole

Light & Dark Golden Glow - Hay on Scarecrow, Hay and Flay

Light Balmy Blue - Shirt

Light & Dark Hydrangea Hue - Overalls

I stamped the sentiment onto the Flag with Tuxedo Black Ink.

I cut a 2 1/4 x 3 1/4" piece of Sunflower Fields DSP and a 2 3/8 x 3 3/8" piece of Pecan Pie Cardstock.

I attached them together with Liquid Glue.

I added a 3/8" Adhesive Velcro Dot pair to the back flap for the closure.

I added the Hay Bales at the bottom of the DSP with Liquid Glue.

Then I attached the Scarecrow with Dimensionals and Mini Dimensionals.

Last I attached the Flag with Dimensionals and Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

For the final touch I added 3 Golden Glow 2026-28 In Color Dots around the Scarecrow.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Fun For Fall stamp set & dies Bundle

Sunflower Fields Designer Series Paper

Cajun Craze Cardstock

Pecan Pie Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

2026-28 In Color Dots

3/8" Adhesive Velcro Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting may Blog today. I hope you enjoyed my Fall Treat Box.

See you next time!

Hugs,

Cathryn

LITTLE DEBBIE PUMPKIN BROWNIE TREAT BOX using SPOOKTACULAR DESIGNER SERIES PAPER - Stampin' Up!

2026-08-19T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for a Little Debbie Pumpkin Brownie. The box measures 4 1/4 x 2 1/2 x 3/4". I used the Spooktacular Designer Series Paper, Simply Leaves stamp set and Soiree Salutations stamp set.
You can watch My Video Tutorial Here!

I started with a piece of Granny Apple Green Cardstock sized:

7 x 6 1/2"

I scored the 7" side at:

3/4, 3 1/4, 4 and 6 1/2"

I scored the 6 1/2" side at:

3/4, 5 and 5 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 6 pieces of Spooktacular Designer Series Paper to the box.

(2) 4 x 2 1/4" front and back

(2) 4 x 1/2" long sides

(2) 1/2 x 2 1/4" short sides

I stamped the 2 small Leaves, from Simply Leaves stamp set onto Basic White Cardstock with Granny Apple Green Ink.

I fussy cut the Leaves out and attached them to the upper left corner with Liquid Glue.

I stamped the sentiment, from Soiree Salutations stamp set, onto a 1/2" high strip of Granny Apple Green Cardstock with Tuxedo Black Ink.

I flagged both ends and attached the sentiment onto the Leaves with Liquid Glue.

I tied a small bow with Linen Thread and attached it to the end of the sentiment with a Glue Dot and Liquid Glue.

For the final touch I added 3 Black Dots, from the Adhesive Backed Ghosts, Bats and Dots, to the lower right and on one of the Leaves.

You can shop for your Stampin' Up! supplies with Me Here!

Supplies:

Spooktacular Designer Series Paper

Simply Leaves Stamp Set

Soiree Salutations Stamp Set

Granny Apple Green Cardstock

Basic White Cardstock

Granny Apple Green Ink

Tuxedo Black Ink

Linen Thread

Adhesive Bats, Ghosts and Dots

Tear & Tape

Liquid Glue

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog. I hope you enjoyed my Halloween Box today!

See You Next Time,

Cathryn

Christmas Holly Treat Box using Home for Christmas Bundle - Stampin' Up!

2026-08-12T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!

My project today is a Treat Box for some KitKat Fun Size Bars. The box measures 3 x 4 1/2 x 1". I used the Home for Christmas Bundle, Christmas Mice stamp set and Timeless Christmas Designer Series Paper.

You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

10 3/4 x 6 1/2"

I scored the 10 3/4" side at:

3/4, 1 3/4, 5 1/4 and 6 1/4"

I scored the 6 1/2" side at:

3/4, 1 3/4, 4 3/4 and 5 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 7 pieces of Timeless Christmas Desiner Series Paper to the box.

(2) 2 3/4 x 3 1/4" back flap front and back

(1) 2 3/4 x 3 1/4" front of box

(2) 3/4 x 3 1/4" long sides

(2) 2 3/4 x 3/4" short sides

I wound Peaceful Pine Bordered Ribbon around the short side of the box and tied a bow on the left side.

I cut the pocket and Tag from Timeless Christmas DSP.

I attached the pocket to the front of the box, over the ribbon, with Liquid Glue.

I cut the circle for the hole in the Tag from Real Red Cardstock and attached it to the tag with Liquid Glue.

I ran Multicolor Christmas Baker's Twine through the hole in the tag and looped it through to secure it.

I cut 2 Holly Leaves from Peaceful Pine Cardstock and 3 Berries from Real Red Cardstock.

I attached the Holly Leaves to the Pocket with Liquid Glue.

I attached the Berries to the Holly Leaves with Mini Dimensionals.

I added some Wink of Stella Glitter to the Berries.

I stamped the sentiment, from Christmas Mice stamp set, onto a 5/8" high piece of Basic White Cardstock with Peaceful Pine Ink.

I attached the sentiment to the top of the back flap with Liquid Glue.

For the final touch I added 3 Rhinestone Basic Jewels to the Pocket.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Home for Christmas stamp set and dies Bundle - Available in September

Christmas Mice stamp set - Available in September

Timeless Christmas Designer Series Paper - Available in September

Real Red Cardstock

Peaceful Pine Cardstock

Basic White Cardstock

Peaceful Pine Ink

Peaceful Pine Bordered Ribbon

Multicolor Christmas Baker's Twine

Rhinestone Basic Jewels

Liquid Glue

Mini Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog. I hope you enjoyed my Holly Box.

See you next time!

Cathryn

CRAFT FAIR IDEA - BISCOFF COOKIE TREAT BOX using HOME FOR CHRISTMAS BUNDLE - Stampin' Up!

2026-08-11T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My projects today is a treat box for a Biscoff Cookie. The box measures 1 3/4 x 4 x 3/4". I used the Home for Christmas stamp set & dies Bundle, Timeless Christmas Designer Series Paper and Christmas Epoxy Shapes.
You can watch My Video Tutorial Here!

I started with a piece of Peaceful Pine Cardstock sized:6 3/4 x 3 1/4"I scored the 6 3/4" side at:2 and 2 3/4"I scored the 3 1/4" side at:3/4 and 2 1/2"I cut the sides/tops of the box by hand.To cut and put the box together you can watch My Video Tutorial Here.

I attached 6 pieces of Timeless Christmas Designer Series Paper to the box.

(2) 1 1/2 x 3 3/4" inside and back

(1) 1 1/2 x 1 3/4" front

(2) 1/2 x 1 3/4" sides

(1) 1 1/2 x 1/2" bottom

I stamped the Gingerbread Man onto Basic White Cardstock with Pecan Pie Ink.

I cut the Gingerbread out using the Matching die.

I stamped the sentiment onto a 1/2" high piece of Thick Basic White Cardstock with Real Red Ink.

I ran Real Red Stitched Ribbon around the front/bottom of the box and tied a bow on the left side.

I flagged the left side of the sentiment and attached it to the upper left side, hanging off the side, making sure it will not be hidden by the Gingerbread Man, with Liquid Glue.

I attached the Gingerbread Man to the front, over the Ribbon with Dimensionals.

For the final touch I added a Present, from the Christmas Epoxy Shapes, to the Gingerbread Man's Hand.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Home for Christmas Bundle - Available in September

Timeless Christmas Designer Series Paper - Available in September

Peaceful Pine Cardstock

Basic White Cardstock

Thick Basic White Cardstock

Pecan Pie Ink

Real Red Ink

Real Red Stitched Ribbon

Christmas Epoxy Shapes

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting My Blog today. I hope you enjoyed my Treat Box.

See You Next Time,

Cathryn

EYEBALL LOLLIPOP NEW TREAT BOX - KIT PROJECT 5 - using OH MY FRIGHT - Stampin' Up!

2026-08-05T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a new treat box I made from 2 Retro Eyeball Lollipops. The box measures 3 1/2 x 3 x 1 1/4". I used the Oh My Fright stamp set & dies Bundle, Stylish Shapes dies and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized:

8 1/4 x 7 1/2

I scored the 8 1/4" side at:

3/4, 2, 4 and 5 1/4"

I scored the 7 1/2" side at:

3/4, 2, 5 1/2 and 6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 7 pieces of Oh My Fright Designer Series Paper to the box.

(2) 3 1/4 x 2 3/4" front and back of back flap

(1) 3 1/4 x 1 3/4" front

(2) 3 1/4 x 1" long sides

(2) 1 x 1 3/4" short sides

I cut a 2 1/8" circle from Daffodil Delight Cardstock using the Stylish Shapes dies.

I stamped the Bats onto the left side with Tuxedo Black Ink.

I stamped the Ghost onto Basic White Cardstock with Tuxedo Black Ink.

I cut the Ghost out using the matching die and colored it with a Light Smokey Slate Stampin' Blend.

I attached the Ghost to the right side of the circle with Dimensionals.

I cut the Stars out of Pumpkin Pie Cardstock using the Oh My Fright dies.

I attached 3 of the Stars to the circle, one on the Ghosts hand, with Liquid Glue.

I stamped the setiment onto a 5/8" high piece of Basic White Cardstock using Pumpkin Pie Ink.

I flagged the ends and attached it to the top of the back flap with Liquid Glue.

I closed the box and tied Black Iridescent Ribbon around the side of the box and tied a bow on the Left.

I attached the Circle over the Ribbon with Dimensionals.

I added some Wink of Stella Glitter to the Ghost and Stars.

For the final touch I added 3 Black Dots around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies Bundle

Stylish Shapes dies

Frightfully Fun Designer Series Paper

Basic Black Cardstock

Daffodil Delight Cardstock

Pumpkin Pie Cardstock

Basic White Cardstock

Tuxedo Black Ink

Pumpkin Pie Ink

Wink of Stella

Black Iridescent Ribbon

Adhesive Backed Bats, Ghosts and Dots

Liquid Glue

Dimensionals

Tool:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today! I hope you enjoyed my new treat box.

See You Next Time,

Cathryn

METAL HALLOWEEN CLICKER TREAT BOX - KIT PROJECT 4 - using OH MY FRIGHT BUNDLE - Stampin' Up!

2026-08-04T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for a Halloween Clicker Toy. The box measures 2 1/4 x 3 x 1". I used the Oh My Fright stamp set and dies Bundle, Spotlight on Nature dies and Oh My Fright Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized:

7 x 5 1/2"

I scored the 7" side at:

1, 3 1/4, 4 1/4 and 6 1/2"

I scored the 5 1/2" side at:

1, 4 and 5"

To cut and put the box together you can watch My Video Tutorial Here.

I stamped the large Bat onto Basic White Cardstock using Tuxedo Black Ink.

I cut the Bat out using the matching die.

I stamped the sentiment onto a 5/8" high piece of Basic White Cardstock with Pumpkin Pie Ink.

I cut a 2 3/16" circle from Frightfully Fun DSP using the Spotlight on Nature dies.

I cut the Moon from Daffodil Delight Cardstock and attached it to the upper/left of the Circle with Liquid Glue.

I attached the sentiment a little lower than middle of the circle with Dimensionals.

Then I attached the Bat to the circle with Dimensionals.

I cut the Swirls from Basic Black Cardstock and attached them to the lower left of the circle, with the ends under the sentiment, using Liqiud Glue.

I added some Wink of Stella Glitter to the Swirls.

I ran some Black Iridescent Ribbon under the top flap and tied a bow at the top.

I attached the circle to the front of the box with Dimensionals.

For the final touch I added 2 Adhesive Backed Bats to the box. One on the Moon and one next to the Swirls.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies Bundle

Spotlight on Nature dies

Frightfully Fun Designer Series Paper

Pumpkin Pie Cardstock

Daffodil Delight Cardstock

Basic Black Cardstock

Basic White Cardstock

Tuxedo Black Ink

Pumpkin Pie Ink

Black Iridescent Ribbon

Adhesive Backed Bats, Ghosts & Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today! I hope you enjoyed my Halloween Box.

See you next time,

Cathryn

MCDONALD'S MINI BUCKET BOX. - HALLOWEEN KIT PROJECT 3 - using OH MY FRIGHT - Stampin' Up!

2026-07-31T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a box for a McDonald's Mini Bucket. The box measures 2 1/2 x 3 3/4 x 1 3/4". I used the Oh My Fright stamp set & dies Bundle, Stylish Shapes dies and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized:

9 x 6"

I scored the 9" side at:

1 3/4, 4 1/4, 6 and 8 1/2"

I scored the 6" side at:

1 3/4, 4 1/4 and 5 1/4"

To cut and put the box together you can watch My Video Tutorial Here!

I attached 6 pieces of Frightfully Fun Designer Series Paper to the box.

(2) 2 1/4 x 2 1/4" front and back

(2) 1 1/2 x 2 1/4" sides

(2) 2 1/4 x 3/4" upper front

I cut a 1 7/8" square from Pumpkin Pie Cardstock using the Stylish Shapes dies.

I stamped the Stars and Dots onto the square with Pumpkin Pie Cardstock with Pumpkin Pie Ink.

I cut the Tree from Basic Black Cardstock, attached it to the corner with Liquid Glue and cut the excess of the sides.

I attached a 2" square of Granny Apple Green Cardstock to the back of the Pumpkin Pie square with Liquid Glue.

I stamped the Cat onto Basic White Cardstock with Tuxedo Black Ink.

I colored the Cat with a Light Smokey Slate Stampin' Blend.

I cut the image out using the matching die.

I attached the Cat to the squares with Dimensionals.

I punched 2 sets of holes in the top flaps with a 1/8" Hole Punch.

I ran Timid Tiger Faux Linen Ribbon (retired) through the holes and tied a bow at the front.

I added some Wink of Stella Glitter to the Hat's Eyes, Nose and Mouth.

For the final touch I added 3 White Dots to the Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies Bundle

Stylish Shapes dies

Frightfully Fun Designer Series Paper

Basic Black Cardstock

Pumpkin Pie Cardstock

Granny Apple Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Pumpkin Pie Ink

Light Smokey Slate Stampin' Blend

Timid Tiger Faux Linen Ribbon (retired)

Adhesive Backed Bats, Ghosts & Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog today. I hope you enjoyed my Halloween Treat Box!

See You Next Time,

Cathryn

HALLOWEEN KIT PROJECT 2 - WITCH FINGER FLINGER BOX using OH MY FRIGHT BUNDLE - Stampin' Up!

2026-07-29T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a box for a Witch Finger Flinger Toy. The box measures 3 x 5 x 3/4". I used the Oh My Fright stamp set & dies Bundle, Stylish Shapes dies and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized:

8 x 7 1/4"

I scored the 8" side at:

3/4, 3 3/4, 4 1/2 and 7 1/2"

I scored the 7 1/4" side at:

3/4, 5 3/4 and 6 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 2 pieces of retired Designer Series Paper to the box sized:

(2) 2 3/4 x 4 3/4" front and back

I cut the Tag from Frightfully Fun Designer Series Paper using the Oh My Fright dies.

I stamped the Ghost onto Basic White Cardstock using Tuxedo Black Ink.

I cut the ghost out using the matching die and colored the bottom with a Light Smokey Slate Stampin' Blend.

I added some Wink of Stella Glitter over the Stampin' Blend line for some sparkle.

I cut the Tree from Gorgeous Grape Cardstock, the Cloud from Smokey Slate Cardstock and the Moon from Daffodil Delight Cardstock.

I attached the Moon and Cloud to the upper part of the Tag with Liquid Glue.

I ran a piece of Black Iridescent Ribbon through the hole in the Tag and tied it in a knot.

I attached the Tree to the Tag with Liquid Glue and the Ghost with Dimensionals.

I attached the entire Tag to the front of the box with Dimensionals.

I stamped just the "BOO" from the sentiment onto Daffodil Delight Cardstock with Gorgeous Grape Ink.

I cut the sentiment out using the smallest square die from the Stylish Shapes dies.

I attached the square to the lower left of the box with Liquid Glue.

For the final touch I added 2 Ghosts, from Adhesive Backed Bats, Ghosts and Dots, to the Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies Bundle

Stylish Shapes dies

Frightfully Fun Designer Series Paper

Daffodil Delight Cardstock

Gorgeous Grape Cardstock

Smokey Slate Cardstock

Basic White Cardstock

Tuxedo Black Ink

Gorgeous Grape Ink

Light Smokey Slate Stampin' Blend

Wink of Stella

Black Iridescent Ribbon

Adhesive Backed Bats, Ghosts and Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today! I hope you enjoyed my Halloween box.

See You Next Time,

Cathryn

HALLOWEEN KIT PROJECT 1 - PUMPKIN FIDGET SPINNER BOX using OH MY FRIGHT BUNDLE - Stampin' Up!

2026-07-28T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!This is the first project in my Halloween "Oh My Fright" Bundle Kit. I made a Box for a Pumpkin Fidget Spinner that measures 2 1/2 x 2 1/2 x 3/4". I used the Oh My Fright stamp set & dies Bundle, 1 7/8" Circle Punch, 2" Circle Punch and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Gorgeous Grape Cardstock sized:

9 x 4"

I scored the 9" side at:

2 1/2, 3 1/4, 5 3/4 and 6 1/2"

I scored the 4" side at:

3/4 and 3 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 7 pieces of Frightfully Fun Designer Series Paper to the box.

(3) 2 1/4 x 2 1/4" front, inside front and back

(4) 1/2 x 2 1/4" sides

I stamped the Cat with Hat onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out with the matching die and colored it with Stampin' Blends.

Dark Highland Heather - Hat Band

Light and Dark Basic Black - Hat

Light Bubble Bath - Inner Ears

Light Smokey Slate - Cat

I cut a circle from Very Vanilla Cardstock using the 1 7/8" Circle Punch.

I stamped the upper left side with the bottom of the Spider Web using Gorgeous Grape Ink.

I cut a Gorgeous Grape circle using the 2" Circle Punch.

I attached the circles together with Liquid Glue.

I attached the circles to the front of the box with Dimensionals.

I stamped the sentiment onto a 3 x 5/8" piece of Very Vanilla Cardstock with Gorgeous Grape Ink.

I slanted both ends and attached the sentiment to the inside flap with Liquid Glue.

I added a set of 3/8" Adhesive Velcro Dots to the inside of the box for the closure.

I tied a small bow with Black Iridescent Ribbon and attached it above the circle with a Glue Dot and Liquid Glue.

For the final touch I added 3 Rhinestone Basic Jewels to the Hat.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies Bundle

1 7/8" Circle Punch

2" Circle Punch

Frightfully Fun Designer Series Paper

Gorgeous Grape Cardstock

VeryVanilla Cardstock

Daffodil Delight Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Black Iridescent Ribbon

Rhinestone Basic Jewels

Liquid Glue

Dimensionals

Glue Dots

3/8" Adhesive Velcro Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you a for visiting my Blog today. I hope you enjoyed my box!

See you next time,

Cathryn

EXTRA LARGE TREAT BOX using SAFARI SMILES BUNDLE - Stampin' Up! *

2026-07-22T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures 4 1/2 x 4 x 2". This X-Large Treat Box would be perfect for Animal Crackers or Circus Peanuts! I used the Safari Smiles stamp set & dies Bundle and Subtles Painted Patterns Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

11 x 8 1/2"

I scored the 11" side at:

3/4, 1 3/4, 4 1/2, 6 1/2, 9 1/4 and 10 1/4"

I scored the 8 1/2" side at:

2 and 6 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 6 pieces of Subtles Painted Patterns Designer Series Paper to the box.

(2) 4 1/4 x 2 1/2" front and back

(2) 4 1/4 x 3/4" upper front and back

(2) 1 3/4 x 2 1/2" sides

I punched 2 sets of holes in the top flaps with a 1/8" Hole Punch.

I ran a doubled strand of Linen Thread through the holes and tied a bow at the front.

I cut a Cloud from Basic White Cardstock and inked the edges with Pool Party Ink and a Blender Blush.

I attached the cloud to the upper left front of the box with Liquid Glue.

I cut the Ground and some Grass from Crumb Cake Cardstock and attached them to the front of the box with Liquid Glue.

I stamped the Large and Small Elephants onto Basic White Cardstock with Tuxedo Black Ink.

I colored them with Light and Dark Smokey Slate Stampin' Blends.

I attached the Large Elephant first then the small one with Dimensionals.

For the final touch I added 3 Real Red Delightful Decorative Dots (retired) around the Elephants.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Safari Smiles stamp set & dies Bundle

Subtles Painted Patterns Designer Series Paper

Real Red Cardstock

Crumb Cake Cardstock

Basic White Cardstock

Tuxedo Black Ink

Pool Party Ink

Stampin' Blends

Linen Thread

Delightful Decorative Dots (retired)

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Blending Brush

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog today. I hope you enjoyed my Treat Box.

See you next time,

Cathryn

FALL WERTHER;S TREAT BOX using SIMPLY LEAVES BUNDLE - Stampin' Up! *

2026-07-21T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for some Werther's Hard Candies. The box measures 2 1/2 x 3 3/4 x 1 1/4". I used the Simply Leaves stamp set & Punch Bundle, Everyday Arches dies, 2026-28 In Color Gingham Gallery Designer Series Paper and Bloom Boutique Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Golden Glow Cardstock sized:

8 x 7"

I scored the 8" side at:

1 1/4, 3 3/4, 5 and 7 1/2"

I scored the 7" side at:

1 1/4, 5 and 6 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Bloom Boutique Designer Series Paper to the box.

(2) 2 1/4 x 3 1/2" front and back

(2) 1 x 3 1/2" long sides

(2) 2 1/4 x 1" short sides

I stamped the small Gingham Leaf onto Golden Glow Cardstock with Golden Glow Ink.

I stamped the large Leaf onto Peaceful Pine Cardstock with Peaceful Pine Ink.

I cut the large Leaf out using the Simply Leaves Punch and I cut the small Leaf out by hand.

I attached the small Leaf to the Large Leaf with a Dimensional at the top and some Liquid Glue.

I tied a bow with Linen Thread and attached it to the base of the Leaves with a Glue Dot.

I tied a bow with Peaceful Pine Bordered Ribbon and attached it over the Linen Thread bow with a Glue Dot and Liquid Glue.

I cut a 2 x 3 1/4" Arch from Gingham Gallery DSP using the Everyday Arches dies.

I attached the Leaves to the Arch with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

For the final touch I added 3 2026-2028 In Color Dots to the Arch and large Leaf.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Simply Leaves stamp set & Punch Bundle

Everyday Arches dies

2026-28 In Color Gingham Gallery Designer Series Paper

Bloom Boutique Designer Series Paper

Golden Glow Cardstock

Peaceful Pine Cardstock

Golden Glow Ink

Peaceful Pine Ink

Peaceful Pine Bordered Ribbon

Linen Thread

2026-28 In Color Dots

Tear & Tape

Liquid Glue

Glue Dots

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today. I hope you enjoyed my Fall Treat Box!

See You next time,

Cathryn

CHRISTMAS IN JULY EAST TREAT BOX using WOODLAND WISHES - Stampin' Up!

2026-07-15T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures 3 1/4 x 2 1/2 x 1". You can get 2 of these boxes from one sheet of Cardstock. I used the Woodland Wishes stamp set, Perennial Postage dies and A Stitched Season Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

6 x 5 1/4"

I scored the 6" side at:

2 1/2 and 3 1/2"

I scored the 5 1/4" side at:

1 and 4 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 2 pieces of A Stitched Season DSP to the box.

(2) 3 x 2 1/4" front and back of box.

I stamped the Polar Bear onto Basic White Cardstock with Tuxedo Black Ink.

I fussy cut the Bear out by hand and colored it with a Light Smokey Slate Stampin' Blend.

I cut a 2 3/8 x 1 1/2" rectangle form A Stitched Season DSP using the Perennial Postage dies.

I attached the Bear to the rectangle with Dimensionals.

I attached the rectangle to the front of the box with Dimensionals.

I punched a hole in the front and back of the box with a 1/8" Hole Punch.

I ran Real Red Stitched Ribbon through the holes and tied a bow at the top.

For the final touch I added 3 Old Olive Moody Palette Glossy Dots to the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Woodland Wishes stamp set

Perennial Postage dies

A Stitched Season Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Balck Ink

Light Smokey Slate Stampin' Blend

Real Red Stitched Ribbon

Moody Palette Glossy Dots

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today. I hope you enjoyed my Treat Box!

See you next time,

Cathryn

CHRISTMAS IN JULY TREAT BOX using WOODLAND WISHES stamp set - Stampin' Up!

2026-07-14T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas treat box that measures 3 1/2 x 4 x 1". I used the Woodland Wishes stamp set, Stylish Shapes dies and A Stitched Season Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

11 x 7"

I scored the 11" side at:

1, 5, 6 and 10"

I scored the 7" side at:

3/4, 1 3/4, 5 1/4 and 6 1/4"

To cut and put the box together you can watch My Video Tutorial here!

I attached 6 pieces of A Stitched Season Designer Series Paper to the box.

(2) 3 1/4 x 3 3/4" front and back of flap

(2) 3/4 x 3 3/4" long sides

(2) 3 1/4 x 3/4" short sides

I cut a 2 3/8" square from Basic White Cardstock using the Stylish Shapes dies.

I stamped the sentiment onto the bottom of the square with Real Red Ink.

I stamped the Reindeer and Hedgehog above the sentiment with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Light Pecan Pie - Reindeer

Light & Dark Crumb Cake - Hedgehog

Light Pool Party - Shadow around animals

I cut a flag in the bottom of a 1 1/2 x 3 3/4" piece of A Stitched Season DSP and attached it to the top flap with Liquid Glue.

I cut a 2 1/2" square from Peaceful Pine Cardstock and attached it to the back of the image square with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I tied a bow with Real Red Stitched Ribbon and attached it to the top of the tag with a Glue Dot and Liquid Glue.

For the final touch I added 3 Peppermints to the upper left of the squares.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Woodland Wishes stamp set

Stylish Shapes dies

A sTitched Season Designer Series Paper

Real Red Cardstock

Peaceful Pine Cardstock

Basic White Cardstock

Tuxedo Black Ink

Real Red Ink

Stampin' Blends

Real Red Stitched Ribbon

Liquid Glue

Glue Dots

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today. I hope you enjoyed my Christmas in July Treat Box!

See you next time,

Cathryn

BEAUTIFUL BELLY BAND TREAT HOLDER using FLOWERING MEADOW BUNDLE - Stampin' Up!

2026-07-08T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat holder with a Belly Band. The box measures 3 x 4 x 1". I used the Flowering Meadow stamp set & dies Bundle, 2" Circle Punch and Velvet Meadow Specialty Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Peaceful Pine Cardstock sized:

11 x 7 1/2"

I scored the 11" side at:

3, 4, 7 and 8"

I scored the 7 1/2" side at:

3/4, 1 3/4, 5 3/4 and 6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 4 pieces of Velvet Meadow Specialty Designer Series Paper to the box.

(4) 2 3/4 x 3 3/4" front and back of flaps

I stamped the large and small Flower groups onto Basic White Cardstock with Bubble Bath Ink.

I stamped the centers with Melon Mambo Ink.

I stamped the 2 types of Greens onto Cloud Cover Cardstock with Peaceful Pine Ink.

I cut the images out using the matching dies.

I cut 4 of the large greenery out of Peaceful Pine Cardstock.

I cut a circle from Cloud Cover Cardstock using the 2" Circle Punch.

I attached the greens and flowers to the circle with Dimensionals and Liquid Glue.

I wrapped a 9 1/2 x 1 3/4" piece of Velvet Meadow DSP around the middle of the box and reinforced the corners with my fingers.

I measures the edges and attached them together, at the ends, with Liquid Glue to make a Belly Band.

I attached the Flowers to the front of the Belly Band with Dimensionals.

I tied a bow with Peaceful Pine Bordered Ribbon and attached it below the flowers, on the circle, with a Glue Dot and Liquid Glue.

For the final touch I added 3 Cloud Cover Sunset Sparkle Sequins around the Flowers.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Flowering Meadow stamp set & dies Bundle

2" Circle Punch

Velvet Meadow Specialty Designer Series Paper

Peaceful Pine Cardstock

Cloud Cover Cardstock

Basic White Cardstock

Bubble Bath Ink

Peaceful Pine Ink

Melon Mambo Ink

Peaceful Pine Bordered Ribbon

Sunset Sparkle Sequins

Liquid Glue

Dimensionals

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today. I hope you enjoyed my Treat Holder!

See You Next Time,

Cathryn

SIMPLY LEAVES BUNDLE TREAT BOX for Twix Bars - Stampin' Up!

2026-07-07T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for some mini Twix bars. The box measures 4 x 5 x 1 1/4". I used the Simply Leaves stamp set & Punch Bundle, Stylish Shapes dies, Sweet Words & Labels dies, Bloom Boutique Designer Series Paper and 2026-2028 In Colors Gingham Gallery Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Hydrangea Hue Cardstock sized:

11 x 6 1/4"

I scored the 11" side at:

1 1/4, 5 1/4, 6 1/2 and 10 1/2"

I scored the 6 1/4" side at:

1 1/4, 4 1/4 and 5 1/2"

To cut and put the box together you can watch My Video Tutorial Here!

I attached 6 pieces of Bloom Boutique Designer Series Paper to the box.

(2) 3 3/4 x 3" lower front and back

(2) 3 3/4 x 1" upper front and back

(2) 1 x 3" sides

I cut 2 Leaves out using the Simply Leaves Punch.

One from Bloom Boutique DSP and one from Gallery Gingham DSP.

I stamped the dotted veins onto the Bloom Boutique Leaf with Hydrangea Hue Ink.

I offset the leaves and secured them together with a Dimensional and Liquid Glue on the stems.

I attached the Leaves to a 2 3/8" Basic White Cardstock Circle cut with the 2 3/8" Circle Punch.

I attached the Basic White Circle to a 2 1/2" Hydrangea Hue circle I cut using the Stylish Shapes dies.

I attached the circle to the left front of the box with Dimensionals.

I stamped the sentiment onto Basic White Cardstock with Tuxedo Black Ink.

I cut the sentiment out using a label from the Sweet Words & Labels dies.

I attached the label to the right side of the box with Liquid Glue and Dimensionals.

I punched 2 sets of holes in the top flaps with a 1/4" Hole Punch.

I ran Hydrangea Hue Bordered Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 White Sunset Sparkle Sequins around the box front.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Simply Leaves stamp set & Punch Bundle

Stylish Shapes dies

Sweet Words & Labels dies

2 3/8" Circle Punch

Bloom Boutique Designer Series Paper

2026-28 In Color Gingham Gallery Designer Series Paper

Hydrangea Hue Cardstock

Basic White Cardstock

Tuxedo Black Ink

Hydrangea Hue Ink

Hydrangea Hue Bordered Ribbon

Sunset Sparkle Sequins

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/4" Hole Punch

Corner Rounder

Thank you for visiting my Blog today. I hope you enjoyed my treat box.

See you next time,

Cathryn

LONG TREAT BOX for KITKATs using SWEET BUGS BUNDLE - Stampin' Up!

2026-07-01T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures 6 3/4 x 2 1/2 x 1". I used the Sweet Bugs stamp set and dies Bundle, Flowering Meadow stamp set, Three Banner Punch and Cute as a Bug Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized:

7 1/2 x 7 1/4"

I scored the 7 1/2" side at:

1, 3 1/2, 4 1/2 and 7"

I scored the 7 1/4" side at:

1/2, 1 1/4, 6 and 6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Cute as a Bug Designer Series Paper to the box.

(2) 4 1/2 x 2 1/4" front and back

(2) 4 1/2 x 3/4" long sides

(4) 2 1/4 x 1/2" small sides

I stamped the 3 Ants onto Basic White Cardstock with Tuxedo Black Ink.

I cut them out with the matching die and colored them with

Stampin' Blends.

Light and Dark Real Red - Ants

Dark Daffodil Delight - Bugle and Flag

I cut a 3 1/2 x 1 1/2" rectangle from Cute as a Bug DSP and a 3 5/8 x 1 5/8" rectangle from Daffodil Delight Cardstock.

I attached them together with Liquid Glue.

I attached the Ants to the rectangles with Mini Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I stamped the sentiment, from Flowering Meadow stamp set, onto Soft Seafoam Cardstock with Tuxedo Black Ink.

I cut the sentiment out using the middle banner not the Three Banner Punch.

I attached the Banner to the lower right front of the box with Dimensionals.

I punched 2 sets of holes on each flap with a 1/8" Hole Punch.

I ran Linen Thread through the holes and tied a bow on the top.

For the final touch I added 3 Cloud Cover Sunset Sparkle Sequins around the Ants.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Sweet Bugs Bundle

Flowering Meadow stamp set

Three Banner Punch

Cute as a Bug Designer Series Paper

Daffodil Delight Cardstock

Soft Seafoam Cardstock

Tuxedo Black Ink

Stampin' Blends

Linen Thread

Sunset Sparkle Sequins

Tear & Tape

Liquid Glue

Dimensionals

Mini Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog. I hope you enjoyed my treat box today.

See you next time!

Love & Hugs,

Cathryn

MILKY WAY WINDOW KOALA TREAT BOX using WILD BUNCH stamp set - Stampin' Up!

2026-06-24T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Window Treat Box that measures 3 x 4 x 1". I used the Wild Bunch stamp set, Stylish Shapes dies, Three Banner Punch, Velvet Meadow Specialty Designer Series Paper and Subtles Painted Patterns Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Peaceful Pine Cardstock sized:

11 x 8"

I scored the 11" side at:

3, 4, 7 and 8"

I scored the 8" side at:

1, 2, 6 and 7"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 1 of the 2 3/4 x 3 3/4" pieces of Velvet Meadow DSP to the front flap with Liquid Glue.

I cut a 2 1/8" circle window from the flap using the Stylish Shapes dies.

I kept the circle than was cut out to use inside the box.

I attached 8 pieces of DSP to the box in total.

(2) 2 3/4 x 3 3/4" Velvet Meadow DSP front and inside front flap

(2) 2 3/4 x 3 3/4" Subtles Painted Patterns DSP inside flap and back of box

(2) 3/4 x 3 3/4" long sides

(2) 2 3/4 x 3/4" short sides

I attached the circle I cut out of the front flap to the inside front flap, exactly through the hole in the front flap, with Liquid Glue.

I stamped the Koala, sentiment and Heart onto Basic White Cardstock with Tuxedo Black Ink.

I fussy cut the Koala and Heart out by hand.

I cut the sentiment out using the middle Banner of the Three Banner Punch.

I colored the images with Stampin' Blends.

Light Bubble Bath - Inner Ears, Nostrils and Heart

Light and Dark Smokey Slate - Koala

I attached the Koala to the inside circle with Dimensionals.

I attached the sentiment inside under the Koala with Liquid Glue.

I attached the Heart next to the sentiment with Liquid Glue.

I wound Peaceful Pine Bordered Ribbon around the box and tied a bow at the front.

For the final touch I added 3 White Sunset Sparkle Sequins around the front.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Wild Bunch stamp set

Stylish Shapes dies

Three Banner Punch

Velvet Meadow Specialty Designer Series Paper

Subtles Painted Patterns Designer Series Paper

Peaceful Pine Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Peaceful Pine Bordered Ribbon

Sunset Sparkle Sequins

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today. I hope you enjoyed my Window Box.

See you next time!

Love & Hugs,

Cathryn

COW TAIL TREAT BOX using WILD BUNCH stamp set PRODUCT OF THE MONTH - Stampin' Up!

2026-06-23T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for some Cow Tails candy. The box measures 3 1/4 x 3 3/4 x 1 1/4". I used the Wild Bunch stamp set, Stylish Shapes dies and Bloom Boutique Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Hydrangea Hue Cardstock sized:

9 1/2 x 7"

I scored the 9 1/2" side at:

1 1/4, 4 1/2, 5 3/4 and 9"

I scored the 7" side at:

1 1/4, 5 and 6 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 6 pieces of Bloom Boutique Designer Series Paper to the box.

(2) 3 x 3 1/2" front and back

(2) 1 x 3 1/2" long sides

(2) 3 x 1" short sides

I stamped the Cow onto Basic White Cardstock with Tuxedo Black Ink.

I fussy cut the image out and colored it with Stampin' Blends.

Dark Barely Blush - Snout and inner Ears

Light and Dark Golden Glow - Fur

I cut a 2 3/8" Square from Basic White Cardstock using the Stylish Shapes dies.

I stamped the Background Squares onto the Square with Hydrangea Hue Ink.

I wound Linen Thread around the square twice and tied a bow on the left side.

I attached the Cow to the square with Dimensionals.

I attached the square to a 2 1/2" Hydrangea Hue Cardstock square with Dimensionals.

I tied Hydrangea Hue Bordered Ribbon under the lid and tied a bow at the top.

For the final touch I added 3 Golden Glow 2026-28 In Color Dots around the Cow.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Wild Bunch stamp set - Product of the month for June sold out in English, available in another language

Stylish Shapes dies

Bloom Boutique Designer Series Paper

Hydrangea Hue Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Linen Thread

Hydrangea Hue Bordered Ribbon

2026-28 In Color Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today. I hope you enjoyed my treat box.

See you next time!

Love & Hugs,

Cathryn

LITTLE DEBBIE RED WHITE and BLUE BROWNIE TREAT BOX using SERVICE ESSENTIALS - Stampin' Up!

2026-06-16T17:52:19.698-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for a Little Debbie Red White and Blue Brownie. The box measures 2 1/4 x 5 1/4 x 3/4". I used the Service Essentials stamp set & dies Bundle, Cute and a Bug Designer Series Paper and Blueberry Bushel Cardstock.
You can watch My Video Tutorial Here!

I started with a piece of Blueberry Bushel Cardstock sized:

6 1/2 x 6"

I scored the 6 1/2" side at:

3/4, 3, 3 3/4 and 6"

I scored the 6" side at:

3/4, 4 3/4 and 5 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 5 pieces of Cute as a Bug Designer Series Paper to the box.

(2) 2 x 3 3/4" front and back

(3) 2 x 1/2" front and back of flap and bottom

I stamped 2 of the large Stars onto Basic White Cardstock with Blueberry Bushel Ink.

I cut 2 medium stars and 7 mini Stars out of Blueberry Bushel Cardstock using the Service Essentials dies.

I started with a piece of Blueberry Bushel Cardstock sized:

6 1/2 x 6"

I scored the 6 1/2" side at:

3/4, 3, 3 3/4 and 6"

I scored the 6" side at:

3/4, 4 3/4 and 5 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 5 pieces of Cute as a Bug Designer Series Paper to the box.

(2) 2 x 3 3/4" front and back

(3) 2 x 1/2" front and back of flap and bottom

I stamped 2 of the large Stars onto Basic White Cardstock with Blueberry Bushel Ink.

I cut 2 medium stars and 7 mini Stars out of Blueberry Bushel Cardstock using the Service Essentials dies.

I attached the 2 Large Stars onto the front of the box with Dimensionals.

I attached the rest of the Stars with Liquid Glue.

I cut 2 sets of holes in the top flap with a 1/4" Hole Punch.

I ran a double strand of White Baker's Twine through the holes and tied a bow at the front.

For the final touch I added Wink of Stella Glitter to the medium and small Stars.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Service Essentials stamp set & dies Bundle

Cute as a Bug Designer Series Paper

Blueberry Bushel Cardstock

Basic White Cardstock

Blueberry Bushel Ink

White Baker's Twine

Wink of Stella

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/4" Hole Punch

Thank you for visiting my Blog today. I hope you enjoyed my Fourth of July treat box.

See you next time!

Love & Hugs,

Cathryn

HYDRANGEA HUE BIRTHDAY TREAT BOX using GARDEN GATHERINGS - Stampin' Up!

2026-06-16T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!I made a Birthday Treat Box using Hydrangea Hue as the primary color. The Box measures 3 1/4 x 4 1/2 x 3 1/2". I used the Garden Gatherings stamp set & dies Bundle, Three Banner Punch, Everyday Arches dies and Bloom Boutique Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Hydrangea Hue Cardstock sized:

10 x 8 1/2"

I scored the 10" side at:

1 1/2, 4 3/4, 6 1/4 and 9 1/2"

I scored the 8 1/2" side at:

1 1/2, 6 and 7 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 6 pieces of Bloom Boutique Designer Series Paper to The box.

(2) 3 x 4 1/4" front and back

(2) 1 1/4 x 4 1/4" long sides

(2) 3 x 1 1/4" short sides

I stamped the Stems onto Basic White Cardstock with Peaceful Pine Ink.

I stamped the large Vase and Flowers onto Basic White Cardstock with Hydrangea Hue Ink.

I stamped the water in the vase by stamping on scrap paper first then inside the Vase with Hydrangea Hue Ink.

I cut a 2 1/4 x 3 1/2" arch from Bloom Boutique DSP using the Everyday Arches dies.

I attached the Flowers to the front of the Vase with Liquid Glue.

I attached the Flowers and Vase to the Arch with Dimensionals.

I wound Hydrangea Hue Bordered Ribbon around the short side of the box and tied a bow on the left side.

I attached the Arch to the front of the box with Dinensionals.

I stamped the sentiment onto Basic White Cardstock with Hydrangea Hue Ink.

I cut the sentiment out using the Three Banner Punch.

I attached the Banner to the Flower Vase with Dimensionals and Liquid Glue.

For the final touch I added 3 White Sunset Sparkle Sequins.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Garden Gatherings stamp set & dies Bundle

Three Banner Punch

Everyday Arches dies

Bloom Boutique Designer Series Paper

Hydrangea Hue Cardstock

Basic White Cardstock

Hydrangea Hue Ink

Peaceful Pine Ink

Hydrangea Hue Bordered Ribbon

Sunset Sparkle Sequins

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today. I hope you enjoyed my Treat Box.

See you next time!

Love & Hugs,

Cathryn

FUN IN THE SUN PEACH RINGS TREAT BOX using SPLASH & RELAX - Stampin' Up!

2026-06-10T08:00:00.000-04:00

Shop Stampin' Up! Here

Hi Friends!My project today is a Summer Treat Box for some delicious Peach Rings. The box measures 2 3/4 x 3 1/2 x 1 1/2". I used the Splash & Relax stamp set & dies Bundle, Stylish Shapes dies, Beautiful Ordinary Life Designer Series Paper and Sunset Sparkle Sequins.
You can watch My Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized:

10 x 8"

I scored the 10" side at:

1 1/2, 4 1/4, 5 3/4 and 8 1/2"

I scored the 8" side at:

3/4, 2 1/4, 5 3/4 and 7 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached six pieces of Beautiful Ordinary Life Designer Series Paper to the box.

(2) 2 1/2 x 3 1/4" front and back of flap

(2) 2 1/2 x 1 1/4" short sides

(2) 1 1/4 x 3 1/4" long sides

I stamped the Tube with Lemon Lolly Ink then Timid Tiger Ink for the accents.

I stamped the Beach Ball with Bubble Bath Ink then Melon Mambo Ink for the accents.

I cut the images out using the matching dies.

I stamped the sentiment onto Pool Party Cardstock with Pretty Peacock Ink.

I cut the sentiment out using a 1" Square die from the Stylish Shapes dies.

I cut the Sunglasses out of Pretty Peacock and Timid Tiger Cardsdtocks.

I attached the Tube to the box first with Liquid Glue.

Then I attached the sentiment, Beach Ball and Sunglasses with Dimensionals.

I tied a bow with Twine that was colored with a Coastal Cabana Ink Pad and attached it to the top left of the box with a Glue Dot and Liquid Glue.

For the final touch I added 3 Timid Tiger Sunset Sparkle Sequins around the Tube.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Splash & Relax stamp set & dies Bundle

Stylish Shapes dies

Beautiful Ordinary Life Designer Series Paper

Daffodil Delight Cardstock

Pool Party Cardstock

Pretty Peacock Cardstock

Timid Tiger Cardstock

Basic White Cardstock

Lemon Lolly Ink

Timid Tiger Ink

Bubble Bath Ink

Melon Mambo Ink

Pretty Peacock Ink

Baker's Twine

Sunset Sparkles Sequins

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Small Circle Punch

Thank you for visiting my Blog today. I hope you enjoyed my Summer Box.

See you next time!

Love & Hugs,

Cathryn