InMotionOnline Products

Replacement filter elements

Tue, 10 Nov 2009 22:16:00 +0000

SCS Filtration has an extensive and affordable selection of replacement filter elements to fit most brands and grades.

Alternative fitting solution

Wed, 14 Oct 2009 05:57:45 +0000

A range of threaded (BSP, NPT, JIC, Metric) and weld-on flanges, together with butt-weld adaptors designed to SAE standards, form the greater part the Stauff-Connect range of products.

Hydraulic sensors

Fri, 30 Oct 2009 03:20:11 +0000

MTS Systems has added a pulse width modulated digital output option to its M-series MH model of mobile hydraulic sensors.

High-friction suction cups

Mon, 12 Oct 2009 03:20:29 +0000

The Duraflex Friction Cups line of suction cups provides grip on oily and wet surfaces. The cups’ special grip pattern enables operators to safely and reliably move slippery metal goods without slowing production lines.

Process control actuator

Mon, 12 Oct 2009 03:20:21 +0000

The Rotork GPSA electric, explosion-proof, process control actuator provides precision performance and an advanced human-machine interface (HMI).

Oil drain bench

Mon, 12 Oct 2009 03:20:24 +0000

The Actiwork Oil Drain Bench is used to capture and contain messy or harmful lubricants (and other fluids) when opening engine filters used in mining, quarries, earthmoving and construction equipment.

Mobile centrifugal separator

Mon, 12 Oct 2009 03:20:11 +0000

Water or particles in oil can often cause hydraulic system breakdowns. Alfa Laval’s upgraded, compact mobile separator unit, Emmie.2, cleans a range of commonly used oils, including hydraulic oils and lube oils, in a single, easy operation.

Air auditing tool

Mon, 12 Oct 2009 03:20:28 +0000

AirMetrix System Assessment is a measurement and analysis tool which is used to assess compressed-air system performance. It can help industry identify areas of waste in compressed-air systems and facilitates the implementation of targeted improvement measures. The tool can thus assist the user to reduce operating costs associated with compressed-air processes and enhance environmental performance as a result.

Connector for vacuum switches

Mon, 12 Oct 2009 03:20:23 +0000

The T-connector is an IP65-classified, prewired connector where two or more electromechanical switches, VS4128, are serially connected to provide one common output.

Compact proximity sensor

Mon, 12 Oct 2009 03:20:22 +0000

Turck’s uprox+ line of factor 1 sensors has been expanded to include the Q10S sensor: a compact 10 x 10 x 28 mm sensor that can achieve sensing distances of up to 5 mm, depending on mounting configuration.

Compact dewpoint transmitter/switch

Mon, 12 Oct 2009 03:20:27 +0000

The EE371 and EE372 from E+E are used for monitoring of dew point temperature in air systems and dryers. Using a special monolithic measurement cell, type HMC01, with an autocalibration procedure, the system achieves a measurement accuracy of ±2C Td.

Insertion DP flowmeter

Mon, 12 Oct 2009 03:20:28 +0000

Using an aerofoil profile sensor to generate a differential pressure, the Wellbar flow sensor is suitable for a wide range of gases and liquids. The sensor is positioned across the flow and has multiple drilling points so that an average differential pressure is generated on the sensor ports. As with other DP flow sensors, the flow is proportional to the square root of the DP and flow calculations provided with the sensor makes it easy to set up a transmitter. Because of the simple mechanical design, the sensors are rugged and can be rated to temperatures to 550 °C and pressures to 400 bar. This type of sensor does not become inordinately expensive as the pipe or duct size increases, and they can be manufactured in lengths up to 15 m.

Liquid ring vacuum pump and compressor

Mon, 12 Oct 2009 03:20:31 +0000

Gardner Denver Nash has added the Nash Vectra XL 750 to its Vectra series of liquid-ring pumps and compressors. Designed from the ground up to meet the widespread needs of the process industry, the Vectra XL 750 has the largest capacity in the series.

Planetary gearboxes

Mon, 12 Oct 2009 03:20:30 +0000

A planetary gearbox is an in-line gear reducer designed for direct mounting to a servomotor. The motor power is transmitted to the sun gear which in turn drives the planet gears contained within an internal tooth ring gear. The planet carrier supports the planet gear and delivers output rotation.