Interview Questions and Answers for Job Interviews

Real Time Software Testing Interview Questions

2016-04-13T12:29:00.002-07:00

Real Time Software Testing Interview Questions

ü In which Software Life cycle phase does testing occur?

ü Can you explain PDCA cycle and where does testing fit?

ü What is the difference between white box, black box and gray box testing?

ü Define Defect?

ü What is the difference between Defect and Failure?

ü What are the broader categories of defects?

ü What is the difference between Verification and Validation?

ü How does testing affect risk?

ü Does Increase in testing always mean good to the project?

ü As a manager what process did you adopt to define testing policy?

ü Should testing be only after build and execution?

ü Are number of defects more in design phase or coding phase?

ü What kind of inputs do we need from the end user to start proper testing?

ü What is the difference between Latent and Masked Defect?

ü A defect which could have been removed during initial stage is removed in later

ü stage how does it affect cost?

ü In testing can you explain the concept of work bench?

ü What's the difference between Alpha and Beta testing?

ü Can you explain the concept of defect cascading?

ü Can you explain how one defect leads to other defects?

ü Can you explain what is Usability testing?

ü What are the different strategies of rollout to the end users?

ü Can you explain requirement traceability and its importance?

ü What is the difference between Pilot and Beta testing?

ü How will you do a risk analysis during software testing?

ü How do you conclude which section is most risky in your application?

ü What does entry and exit criteria mean in a project?

ü On what basis is the Acceptance plan prepared?

ü What's the relation between environment reality and test phases?

ü What are different types of verifications?

ü What's the difference between Inspections and Walkthroughs?

ü Can you explain regression testing and confirmation testing?

ü What do you mean by coverage and what are the different types of coverage

ü techniques?

ü How does fundamentally a coverage tool work?

ü What is configuration management?

ü Can you explain the concept of baseline in software development?

ü What are the different test plan documents in project?

ü How do test documents in a project span across software development life cycle?

ü Can you explain inventories?

ü How do you do Analysis and design for testing projects?

ü Can you explain calibration?

ü Which test cases are first written white boxes or black box?

ü Can you explain Co-habiting software?

ü What different impact rating's you have used in your project?

ü Can you explain what a test log is?

ü Explain SDLC (Software development Life Cycle) in detail?

ü Can you explain waterfall model?

ü Can you explain big-bang waterfall model?

ü Can you explain phased waterfall model?

ü Explain Iterative model, Incremental model, Spiral model, Evolutionary model

ü and V-Model?

ü Explain Unit testing, Integration tests, System testing and Acceptance testing?

ü What's the difference between system and acceptance testing?

ü Which is the best model?

ü What group of teams can do software testing?

ü Testing techniques

ü Can you explain boundary value analysis?

ü What is BV in software testing?

ü Can you explain Equivalence partitioning?

ü Can you explain how state transition diagram can be helpful during testing?

ü Can you explain random testing?

ü Can you explain monkey testing?

ü What is negative and positive testing?

ü Can you explain exploratory testing?

ü What exactly are semi-random test cases?

ü Can you explain the concept of orthogonal array?

ü Can you explain pair-wise defect fundamental?

ü Can you explain the concept of decision tables?

ü How did you define severity ratings in your project?

ü Software process

ü What is a Software process?

ü What are the different cost element involved in implementing process in an

ü organization?

ü What is a model?

ü What is maturity level?

ü Can you explain the concept of process area in CMMI?

ü Can you explain the concept of tailoring?

ü CMMI

ü What is CMMI and what's the advantage of implementing CMMI in an

ü organization?

ü What's the difference between implementation and Institutionalization?

ü What are different models in CMMI?

ü Can you explain staged and continuous models in CMMI?

ü Can you explain the different maturity levels in staged representation?

ü Can you explain capability levels in continuous representation?

ü Which model should we use and under what scenarios?

ü How many process areas are present in CMMI and in what classification do they

ü fall in?

ü What the difference between every level in CMMI?

ü What different sources are needed to verify authenticity for CMMI

ü implementation?

ü Can you explain SCAMPI process?

ü How is appraisal done in CMMI?

ü Which appraisal method class is the best?

ü Can you explain the importance of PII in SCAMPI?

ü Can you explain implementation of CMMI in one of the Key process areas?

ü Explanation of all process areas with goals and practices?

ü Can you explain the process areas?

ü Six Sigma

ü What is six sigma?

ü Can you explain the different methodology for execution and design process in

ü SIX sigma?

ü What does executive leaders, champions, Master Black belt, green belts and black

ü belts mean?

ü What are the different kinds of variations used in six sigma?

ü Can you explain the concept of standard deviation?

ü Can you explain the concept of fish bone/ Ishikawa diagram?

ü Can you explain QFD?

ü Can you explain FMEA?

ü Can you explain X bar charts?

ü Can you explain Flow charting and brain storming?

ü Metrics

ü What is meant by measure and metrics?

ü Can you explain Number of defects measure?

ü Can you explain number of production defects measure?

ü Can you explain defect seeding?

ü Can you explain DRE?

ü Can you explain Unit and system test DRE?

ü How do you measure test effectiveness?

ü Can you explain Defect age and Defect spoilage?

ü Automated Testing

ü What are good candidate for automation in testing?

ü Does automation replace manual testing?

ü Which automation tool have you worked and can you explain them in brief?

ü Can you explain how does load testing conceptually work for websites?

ü Can you explain how did you perform load testing using tool?

ü What does load test summary report contain?

ü Can you explain the concept of data-driven testing?

ü Can you explain table-driven testing?

ü How can you perform data-driven testing using Automated QA?

ü Testing Estimation

ü What are the different ways of doing black box testing?

ü Can you explain TPA analysis?

ü Can you explain in brief Function points?

ü Can you explain the concept Application boundary?

ü Can you explain the concept of elementary process?

ü Can you explain the concept of static and dynamic elementary process?

ü Can you explain concept of FTR, ILF, EIF, EI, EO, EQ and GSC?

ü How can you estimate number of acceptance test cases in a project?

ü Can you explain on what basis does TPA actually work?

ü How did you do estimation for black box testing?

ü How did you estimate white box testing?

ü Is there a way to estimate acceptance test cases in a system?

Real Time SQL Server Interview questions and answers

2016-04-13T11:59:00.002-07:00

Real Time SQL Server Interview questions and answers

What is normalization? - Well a relational database is basically composed of tables that contain related data. So the Process of organizing this data into tables is actually referred to as normalization.

What is a Stored Procedure? - Its nothing but a set of T-SQL statements combined to perform a single task of several tasks. Its basically like a Macro so when you invoke the Stored procedure, you actually run a set of statements.

Can you give an example of Stored Procedure? - sp_helpdb , sp_who2, sp_renamedb are a set of system defined stored procedures. We can also have user defined stored procedures which can be called in similar way.

What is a trigger? - Triggers are basically used to implement business rules. Triggers is also similar to stored procedures. The difference is that it can be activated when data is added or edited or deleted from a table in a database.

What is a view? - If we have several tables in a db and we want to view only specific columns from specific tables we can go for views. It would also suffice the needs of security some times allowing specfic users to see only specific columns based on the permission that we can configure on the view. Views also reduce the effort that is required for writing queries to access specific columns every time.

What is an Index? - When queries are run against a db, an index on that db basically helps in the way the data is sorted to process the query for faster and data retrievals are much faster when we have an index.

What are the types of indexes available with SQL Server? - There are basically two types of indexes that we use with the SQL Server. Clustered and the Non-Clustered.

What is the basic difference between clustered and a non-clustered index? - The difference is that, Clustered index is unique for any given table and we can have only one clustered index on a table. The leaf level of a clustered index is the actual data and the data is resorted in case of clustered index. Whereas in case of non-clustered index the leaf level is actually a pointer to the data in rows so we can have as many non-clustered indexes as we can on the db.

What are cursors? - Well cursors help us to do an operation on a set of data that we retreive by commands such as Select columns from table. For example : If we have duplicate records in a table we can remove it by declaring a cursor which would check the records during retreival one by one and remove rows which have duplicate values.

When do we use the UPDATE_STATISTICS command? - This command is basically used when we do a large processing of data. If we do a large amount of deletions any modification or Bulk Copy into the tables, we need to basically update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.

Which TCP/IP port does SQL Server run on? - SQL Server runs on port 1433 but we can also change it for better security.

From where can you change the default port? - From the Network Utility TCP/IP properties –> Port number.both on client and the server.

Can you tell me the difference between DELETE & TRUNCATE commands? - Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.

Can we use Truncate command on a table which is referenced by FOREIGN KEY? - No. We cannot use Truncate command on a table with Foreign Key because of referential integrity.

What is the use of DBCC commands? - DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.

Can you give me some DBCC command options?(Database consistency check) - DBCC CHECKDB - Ensures that tables in the db and the indexes are correctly linked.and DBCC CHECKALLOC - To check that all pages in a db are correctly allocated. DBCC SQLPERF - It gives report on current usage of transaction log in percentage. DBCC CHECKFILEGROUP - Checks all tables file group for any damage.

What command do we use to rename a db? - sp_renamedb ‘oldname’ , ‘newname’

Well sometimes sp_reanmedb may not work you know because if some one is using the db it will not accept this command so what do you think you can do in such cases? - In such cases we can first bring to db to single user using sp_dboptions and then we can rename that db and then we can rerun the sp_dboptions command to remove the single user mode.

What is the difference between a HAVING CLAUSE and a WHERE CLAUSE? - Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query.

What do you mean by COLLATION? - Collation is basically the sort order. There are three types of sort order Dictionary case sensitive, Dictonary - case insensitive and Binary.

What is a Join in SQL Server? - Join actually puts data from two or more tables into a single result set.

Can you explain the types of Joins that we can have with Sql Server? - There are three types of joins: Inner Join, Outer Join, Cross Join

When do you use SQL Profiler? - SQL Profiler utility allows us to basically track connections to the SQL Server and also determine activities such as which SQL Scripts are running, failed jobs etc..

What is a Linked Server? - Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements.

Can you link only other SQL Servers or any database servers such as Oracle? - We can link any server provided we have the OLE-DB provider from Microsoft to allow a link. For Oracle we have a OLE-DB provider for oracle that microsoft provides to add it as a linked server to the sql server group.

Which stored procedure will you be running to add a linked server? - sp_addlinkedserver, sp_addlinkedsrvlogin

What are the OS services that the SQL Server installation adds? - MS SQL SERVER SERVICE, SQL AGENT SERVICE, DTC (Distribution transac co-ordinator)

Can you explain the role of each service? - SQL SERVER - is for running the databases SQL AGENT - is for automation such as Jobs, DB Maintanance, Backups DTC - Is for linking and connecting to other SQL Servers

How do you troubleshoot SQL Server if its running very slow? - First check the processor and memory usage to see that processor is not above 80% utilization and memory not above 40-45% utilization then check the disk utilization using Performance Monitor, Secondly, use SQL Profiler to check for the users and current SQL activities and jobs running which might be a problem. Third would be to run UPDATE_STATISTICS command to update the indexes

Lets say due to N/W or Security issues client is not able to connect to server or vice versa. How do you troubleshoot? - First I will look to ensure that port settings are proper on server and client Network utility for connections. ODBC is properly configured at client end for connection ——Makepipe & readpipe are utilities to check for connection. Makepipe is run on Server and readpipe on client to check for any connection issues.

What are the authentication modes in SQL Server? - Windows mode and mixed mode (SQL & Windows).

Where do you think the users names and passwords will be stored in sql server? - They get stored in master db in the sysxlogins table.

What is log shipping? Can we do logshipping with SQL Server 7.0 - Logshipping is a new feature of SQL Server 2000. We should have two SQL Server - Enterprise Editions. From Enterprise Manager we can configure the logshipping. In logshipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db and we can use this as the DR (disaster recovery) plan.

Let us say the SQL Server crashed and you are rebuilding the databases including the master database what procedure to you follow? - For restoring the master db we have to stop the SQL Server first and then from command line we can type SQLSERVER –m which will basically bring it into the maintenance mode after which we can restore the master db.

Let us say master db itself has no backup. Now you have to rebuild the db so what kind of action do you take?

What is BCP? When do we use it? - BulkCopy is a tool used to copy huge amount of data from tables and views. But it won’t copy the structures of the same.

What should we do to copy the tables, schema and views from one SQL Server to another? - We have to write some DTS packages for it.

What are the different types of joins and what dies each do? What are the four main query statements?

----------------------------------PINAL Dave

What is RDBMS?

Relational Data Base Management Systems (RDBMS) are database management systems that maintain data records and indices in tables. Relationships may be created and maintained across and among the data and tables. In a relational database, relationships between data items are expressed by means of tables. Interdependencies among these tables are expressed by data values rather than by pointers. This allows a high degree of data independence. An RDBMS has the capability to recombine the data items from different files, providing powerful tools for data usage.

What is normalization?

Database normalization is a data design and organization process applied to data structures based on rules that help build relational databases. In relational database design, the process of organizing data to minimize redundancy. Normalization usually involves dividing a database into two or more tables and defining relationships between the tables. The objective is to isolate data so that additions, deletions, and modifications of a field can be made in just one table and then propagated through the rest of the database via the defined relationships.

What is Stored Procedure?

A stored procedure is a named group of SQL statements that have been previously created and stored in the server database. Stored procedures accept input parameters so that a single procedure can be used over the network by several clients using different input data. And when the procedure is modified, all clients automatically get the new version. Stored procedures reduce network traffic and improve performance. Stored procedures can be used to help ensure the integrity of the database.

e.g. sp_helpdb, sp_renamedb, sp_depends etc.

What is Trigger?

A trigger is a SQL procedure that initiates an action when an event (INSERT, DELETE or UPDATE) occurs. Triggers are stored in and managed by the DBMS.Triggers are used to maintain the referential integrity of data by changing the data in a systematic fashion. A trigger cannot be called or executed; the DBMS automatically fires the trigger as a result of a data modification to the associated table. Triggers can be viewed as similar to stored procedures in that both consist of procedural logic that is stored at the database level. Stored procedures, however, are not event-drive and are not attached to a specific table as triggers are. Stored procedures are explicitly executed by invoking a CALL to the procedure while triggers are implicitly executed. In addition, triggers can also execute stored procedures.

Nested Trigger: A trigger can also contain INSERT, UPDATE and DELETE logic within itself, so when the trigger is fired because of data modification it can also cause another data modification, thereby firing another trigger. A trigger that contains data modification logic within itself is called a nested trigger.

What is View?

A simple view can be thought of as a subset of a table. It can be used for retrieving data, as well as updating or deleting rows. Rows updated or deleted in the view are updated or deleted in the table the view was created with. It should also be noted that as data in the original table changes, so does data in the view, as views are the way to look at part of the original table. The results of using a view are not permanently stored in the database. The data accessed through a view is actually constructed using standard T-SQL select command and can come from one to many different base tables or even other views.

What is Index?

An index is a physical structure containing pointers to the data. Indices are created in an existing table to locate rows more quickly and efficiently. It is possible to create an index on one or more columns of a table, and each index is given a name. The users cannot see the indexes, they are just used to speed up queries. Effective indexes are one of the best ways to improve performance in a database application. A table scan happens when there is no index available to help a query. In a table scan SQL Server examines every row in the table to satisfy the query results. Table scans are sometimes unavoidable, but on large tables, scans have a terrific impact on performance.

Clustered indexes define the physical sorting of a database table’s rows in the storage media. For this reason, each database table may have only one clustered index.

Non-clustered indexes are created outside of the database table and contain a sorted list of references to the table itself.

What is the difference between clustered and a non-clustered index?

A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages.

A nonclustered index is a special type of index in which the logical order of the index does not match the physical stored order of the rows on disk. The leaf node of a nonclustered index does not consist of the data pages. Instead, the leaf nodes contain index rows.

What are the different index configurations a table can have?

A table can have one of the following index configurations:

No indexes

A clustered index

A clustered index and many nonclustered indexes

A nonclustered index

Many nonclustered indexes

What is cursors?

Cursor is a database object used by applications to manipulate data in a set on a row-by-row basis, instead of the typical SQL commands that operate on all the rows in the set at one time.

In order to work with a cursor we need to perform some steps in the following order:

Declare cursor

Open cursor

Fetch row from the cursor

Process fetched row

Close cursor

Deallocate cursor

What is the use of DBCC commands?

DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.

E.g. DBCC CHECKDB - Ensures that tables in the db and the indexes are correctly linked.

DBCC CHECKALLOC - To check that all pages in a db are correctly allocated.

DBCC CHECKFILEGROUP - Checks all tables file group for any damage.

What is a Linked Server?

Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements. With a linked server, you can create very clean, easy to follow, SQL statements that allow remote data to be retrieved, joined and combined with local data.

Storped Procedure sp_addlinkedserver, sp_addlinkedsrvlogin will be used add new Linked Server.

What is Collation?

Collation refers to a set of rules that determine how data is sorted and compared. Character data is sorted using rules that define the correct character sequence, with options for specifying case-sensitivity, accent marks, kana character types and character width.

What are different type of Collation Sensitivity?

Case sensitivity

A and a, B and b, etc.

Accent sensitivity

a and á, o and ó, etc.

Kana Sensitivity

When Japanese kana characters Hiragana and Katakana are treated differently, it is called Kana sensitive.

Width sensitivity

When a single-byte character (half-width) and the same character when represented as a double-byte character (full-width) are treated differently then it is width sensitive.

What’s the difference between a primary key and a unique key?

Both primary key and unique enforce uniqueness of the column on which they are defined. But by default primary key creates a clustered index on the column, where are unique creates a nonclustered index by default. Another major difference is that, primary key doesn’t allow NULLs, but unique key allows one NULL only.

How to implement one-to-one, one-to-many and many-to-many relationships while designing tables?

One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships.

One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships.

Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table.

What is a NOLOCK?

Using the NOLOCK query optimiser hint is generally considered good practice in order to improve concurrency on a busy system. When the NOLOCK hint is included in a SELECT statement, no locks are taken when data is read. The result is a Dirty Read, which means that another process could be updating the data at the exact time you are reading it. There are no guarantees that your query will retrieve the most recent data. The advantage to performance is that your reading of data will not block updates from taking place, and updates will not block your reading of data. SELECT statements take Shared (Read) locks. This means that multiple SELECT statements are allowed simultaneous access, but other processes are blocked from modifying the data. The updates will queue until all the reads have completed, and reads requested after the update will wait for the updates to complete. The result to your system is delay(blocking).

What is difference between DELETE & TRUNCATE commands?

Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.

TRUNCATE

TRUNCATE is faster and uses fewer system and transaction log resources than DELETE.

TRUNCATE removes the data by deallocating the data pages used to store the table’s data, and only the page deallocations are recorded in the transaction log.

TRUNCATE removes all rows from a table, but the table structure and its columns, constraints, indexes and so on remain. The counter used by an identity for new rows is reset to the seed for the column.

You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint.

Because TRUNCATE TABLE is not logged, it cannot activate a trigger.

TRUNCATE can not be Rolled back using logs.

TRUNCATE is DDL Command.

TRUNCATE Resets identity of the table.

DELETE

DELETE removes rows one at a time and records an entry in the transaction log for each deleted row.

If you want to retain the identity counter, use DELETE instead. If you want to remove table definition and its data, use the DROP TABLE statement.

DELETE Can be used with or without a WHERE clause

DELETE Activates Triggers.

DELETE Can be Rolled back using logs.

DELETE is DML Command.

DELETE does not reset identity of the table.

Difference between Function and Stored Procedure?

UDF can be used in the SQL statements anywhere in the WHERE/HAVING/SELECT section where as Stored procedures cannot be.

UDFs that return tables can be treated as another rowset. This can be used in JOINs with other tables.

Inline UDF’s can be though of as views that take parameters and can be used in JOINs and other Rowset operations.

When is the use of UPDATE_STATISTICS command?

This command is basically used when a large processing of data has occurred. If a large amount of deletions any modification or Bulk Copy into the tables has occurred, it has to update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.

What types of Joins are possible with Sql Server?

Joins are used in queries to explain how different tables are related. Joins also let you select data from a table depending upon data from another table.

Types of joins: INNER JOINs, OUTER JOINs, CROSS JOINs. OUTER JOINs are further classified as LEFT OUTER JOINS, RIGHT OUTER JOINS and FULL OUTER JOINS.

What is the difference between a HAVING CLAUSE and a WHERE CLAUSE?

Specifies a search condition for a group or an aggregate. HAVING can be used only with the SELECT statement. HAVING is typically used in a GROUP BY clause. When GROUP BY is not used, HAVING behaves like a WHERE clause. Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query. HAVING criteria is applied after the the grouping of rows has occurred.

What is sub-query? Explain properties of sub-query.

Sub-queries are often referred to as sub-selects, as they allow a SELECT statement to be executed arbitrarily within the body of another SQL statement. A sub-query is executed by enclosing it in a set of parentheses. Sub-queries are generally used to return a single row as an atomic value, though they may be used to compare values against multiple rows with the IN keyword.

A subquery is a SELECT statement that is nested within another T-SQL statement. A subquery SELECT statement if executed independently of the T-SQL statement, in which it is nested, will return a result set. Meaning a subquery SELECT statement can standalone and is not depended on the statement in which it is nested. A subquery SELECT statement can return any number of values, and can be found in, the column list of a SELECT statement, a FROM, GROUP BY, HAVING, and/or ORDER BY clauses of a T-SQL statement. A Subquery can also be used as a parameter to a function call. Basically a subquery can be used anywhere an expression can be used.

Properties of Sub-Query

A subquery must be enclosed in the parenthesis.

A subquery must be put in the right hand of the comparison operator, and

A subquery cannot contain a ORDER-BY clause.

A query can contain more than one sub-queries.

What are types of sub-queries?

Single-row subquery, where the subquery returns only one row.

Multiple-row subquery, where the subquery returns multiple rows,.and

Multiple column subquery, where the subquery returns multiple columns.

What is User Defined Functions?

User-Defined Functions allow to define its own T-SQL functions that can accept 0 or more parameters and return a single scalar data value or a table data type.

What kind of User-Defined Functions can be created?

There are three types of User-Defined functions in SQL Server 2000 and they are Scalar, Inline Table-Valued and Multi-statement Table-valued.

Scalar User-Defined Function

A Scalar user-defined function returns one of the scalar data types. Text, ntext, image and timestamp data types are not supported. These are the type of user-defined functions that most developers are used to in other programming languages. You pass in 0 to many parameters and you get a return value.

Inline Table-Value User-Defined Function

An Inline Table-Value user-defined function returns a table data type and is an exceptional alternative to a view as the user-defined function can pass parameters into a T-SQL select command and in essence provide us with a parameterized, non-updateable view of the underlying tables.

Multi-statement Table-Value User-Defined Function

A Multi-Statement Table-Value user-defined function returns a table and is also an exceptional alternative to a view as the function can support multiple T-SQL statements to build the final result where the view is limited to a single SELECT statement. Also, the ability to pass parameters into a T-SQL select command or a group of them gives us the capability to in essence create a parameterized, non-updateable view of the data in the underlying tables. Within the create function command you must define the table structure that is being returned. After creating this type of user-defined function, It can be used in the FROM clause of a T-SQL command unlike the behavior found when using a stored procedure which can also return record sets.

Which TCP/IP port does SQL Server run on? How can it be changed?

SQL Server runs on port 1433. It can be changed from the Network Utility TCP/IP properties –> Port number.both on client and the server.

What are the authentication modes in SQL Server? How can it be changed?

Windows mode and mixed mode (SQL & Windows).

To change authentication mode in SQL Server click Start, Programs, Microsoft SQL Server and click SQL Enterprise Manager to run SQL Enterprise Manager from the Microsoft SQL Server program group. Select the server then from the Tools menu select SQL Server Configuration Properties, and choose the Security page.

Where are SQL server users names and passwords are stored in sql server?

They get stored in master db in the sysxlogins table.

Which command using Query Analyzer will give you the version of SQL server and operating system?

SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')

What is SQL server agent?

SQL Server agent plays an important role in the day-to-day tasks of a database administrator (DBA). It is often overlooked as one of the main tools for SQL Server management. Its purpose is to ease the implementation of tasks for the DBA, with its full-function scheduling engine, which allows you to schedule your own jobs and scripts.

Can a stored procedure call itself or recursive stored procedure? How many level SP nesting possible?

Yes. Because Transact-SQL supports recursion, you can write stored procedures that call themselves. Recursion can be defined as a method of problem solving wherein the solution is arrived at by repetitively applying it to subsets of the problem. A common application of recursive logic is to perform numeric computations that lend themselves to repetitive evaluation by the same processing steps. Stored procedures are nested when one stored procedure calls another or executes managed code by referencing a CLR routine, type, or aggregate. You can nest stored procedures and managed code references up to 32 levels.

What is @@ERROR?

The @@ERROR automatic variable returns the error code of the last Transact-SQL statement. If there was no error, @@ERROR returns zero. Because @@ERROR is reset after each Transact-SQL statement, it must be saved to a variable if it is needed to process it further after checking it.

What is Raiseerror?

Stored procedures report errors to client applications via the RAISERROR command. RAISERROR doesn’t change the flow of a procedure; it merely displays an error message, sets the @@ERROR automatic variable, and optionally writes the message to the SQL Server error log and the NT application event log.

What is log shipping?

Log shipping is the process of automating the backup of database and transaction log files on a production SQL server, and then restoring them onto a standby server. Enterprise Editions only supports log shipping. In log shipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db can be used this as the Disaster Recovery plan. The key feature of log shipping is that is will automatically backup transaction logs throughout the day and automatically restore them on the standby server at defined interval.

What is the difference between a local and a global variable?

A local temporary table exists only for the duration of a connection or, if defined inside a compound statement, for the duration of the compound statement.

A global temporary table remains in the database permanently, but the rows exist only within a given connection. When connection are closed, the data in the global temporary table disappears. However, the table definition remains with the database for access when database is opened next time

What command do we use to rename a db?

sp_renamedb ‘oldname’ , ‘newname’

If someone is using db it will not accept sp_renmaedb. In that case first bring db to single user using sp_dboptions. Use sp_renamedb to rename database. Use sp_dboptions to bring database to multi user mode.

What is sp_configure commands and set commands?

Use sp_configure to display or change server-level settings. To change database-level settings, use ALTER DATABASE. To change settings that affect only the current user session, use the SET statement.

Using query analyzer, name 3 ways to get an accurate count of the number of records in a table?

SELECT * FROM table1

SELECT COUNT(*) FROM table1

SELECT rows FROM sysindexes WHERE id = OBJECT_ID(table1) AND indid < 2

What are primary keys and foreign keys?

Primary keys are the unique identifiers for each row. They must contain unique values and cannot be null. Due to their importance in relational databases, Primary keys are the most fundamental of all keys and constraints. A table can have only one Primary key.

Foreign keys are both a method of ensuring data integrity and a manifestation of the relationship between tables.

What is data integrity? Explain constraints?

Data integrity is an important feature in SQL Server. When used properly, it ensures that data is accurate, correct, and valid. It also acts as a trap for otherwise undetectable bugs within applications.

A PRIMARY KEY constraint is a unique identifier for a row within a database table. Every table should have a primary key constraint to uniquely identify each row and only one primary key constraint can be created for each table. The primary key constraints are used to enforce entity integrity.

A UNIQUE constraint enforces the uniqueness of the values in a set of columns, so no duplicate values are entered. The unique key constraints are used to enforce entity integrity as the primary key constraints.

A FOREIGN KEY constraint prevents any actions that would destroy links between tables with the corresponding data values. A foreign key in one table points to a primary key in another table. Foreign keys prevent actions that would leave rows with foreign key values when there are no primary keys with that value. The foreign key constraints are used to enforce referential integrity.

A CHECK constraint is used to limit the values that can be placed in a column. The check constraints are used to enforce domain integrity.

A NOT NULL constraint enforces that the column will not accept null values. The not null constraints are used to enforce domain integrity, as the check constraints.

How to get @@error and @@rowcount at the same time?

If @@Rowcount is checked after Error checking statement then it will have 0 as the value of @@Recordcount as it would have been reset.

And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR

What is Identity?

Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers, the value of this cannot be controled. Identity/GUID columns do not need to be indexed.

What is BCP? When does it used?

BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination.

How do you load large data to the SQL server database?

BulkCopy is a tool used to copy huge amount of data from tables. BULK INSERT command helps to Imports a data file into a database table or view in a user-specified format.

Can we rewrite subqueries into simple select statements or with joins?

Subqueries can often be re-written to use a standard outer join, resulting in faster performance. As we may know, an outer join uses the plus sign (+) operator to tell the database to return all non-matching rows with NULL values. Hence we combine the outer join with a NULL test in the WHERE clause to reproduce the result set without using a sub-query.

Can SQL Servers linked to other servers like Oracle?

SQL Server can be lined to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has a OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.

How to know which index a table is using?

SELECT table_name,index_name FROM user_constraints

How to copy the tables, schema and views from one SQL server to another?

Microsoft SQL Server 2000 Data Transformation Services (DTS) is a set of graphical tools and programmable objects that lets user extract, transform, and consolidate data from disparate sources into single or multiple destinations.

What is Self Join?

This is a particular case when one table joins to itself, with one or two aliases to avoid confusion. A self join can be of any type, as long as the joined tables are the same. A self join is rather unique in that it involves a relationship with only one table. The common example is when company have a hierarchal reporting structure whereby one member of staff reports to another.

What is Cross Join?

A cross join that does not have a WHERE clause produces the Cartesian product of the tables involved in the join. The size of a Cartesian product result set is the number of rows in the first table multiplied by the number of rows in the second table. The common example is when company wants to combine each product with a pricing table to analyze each product at each price.

Which virtual table does a trigger use?

Inserted and Deleted.

List few advantages of Stored Procedure.

Stored procedure can reduced network traffic and latency, boosting application performance.

Stored procedure execution plans can be reused, staying cached in SQL Server’s memory, reducing server overhead.

Stored procedures help promote code reuse.

Stored procedures can encapsulate logic. You can change stored procedure code without affecting clients.

Stored procedures provide better security to your data.

------------------------SQL 2005 interview questions--------------

If I want to see what fields a table is made of, and what the sizes of the

fields are, what option do I have to look for?

• What is a query?

• A SQL query is typed in the _________ .

• What is the purpose of the model database?

• What is the purpose of the master database?

• What is the purpose of the tempdb database?

• What is the purpose of the USE command?

• If you delete a table in the database, will the data in the table be deleted too?

• What is the Parse Query button used for? How does this help you?

• Tables are created in a ____________________ in SQL Server 2005.

• What is usually the first word in a SQL query?

• Does a SQL Server 2005 SELECT statement require a FROM?

• Can a SELECT statement in SQL Server 2005 be used to make an assignment?

Explain with examples.

• What is the ORDER BY used for?

• Does ORDER BY actually change the order of the data in the tables or does it just

change the output?

• What is the default order of an ORDER BY clause?

• What kind of comparison operators can be used in a WHERE clause?

• What are four major operators that can be used to combine conditions on a WHERE

clause? Explain the operators with examples.

• What are the logical operators?

• In a WHERE clause, do you need to enclose a text column in quotes? Do you need to

enclose a numeric column in quotes?

• Is a null value equal to anything? Can a space in a column be considered a null

value? Why or why not?

• Will COUNT(column) include columns with null values in its count?

• What are column aliases? Why would you want to use column aliases? How can you

embed blanks in column aliases?

• What are table aliases?

• What are table qualifiers? When should table qualifiers be used?

• Are semicolons required at the end of SQL statements in SQL Server 2005?

• Do comments need to go in a special place in SQL Server 2005?

• When would you use the ROWCOUNT function versus using the WHERE clause?

• Is SQL case-sensitive? Is SQL Server 2005 case-sensitive?

• What is a synonym? Why would you want to create a synonym?

• Can a synonym name of a table be used instead of a table name in a SELECT

statement?

• Can a synonym of a table be used when you are trying to alter the definition

of a table?

• Can you type more than one query in the query editor screen at the same time?

• The INSERT INTO .. VALUES option will insert rows into the _________ of a table.

• While you are inserting values into a table with the INSERT INTO .. VALUES

option, does the order of the columns in the INSERT statement have to be the

same as the order of the columns in the table?

• While you are inserting values into a table with the INSERT INTO .. SELECT

option, does the order of the columns in the INSERT statement have to be

the same as the order of the columns in the table?

• When would you use an INSERT INTO .. SELECT option versus an INSERT INTO .. VALUES option? Give an example of each.

• What does the UPDATE command do?

• Can you change the data type of a column in a table after the table has been

created? If so,which command would you use?

• Will SQL Server 2005 allow you to reduce the size of a column?

• What integer data types are available in SQL Server 2005?

• What is the default value of an integer data type in SQL Server 2005?

• What decimal data types are available in SQL Server 2005?

• What is the difference between a CHAR and a VARCHAR datatype?

• Does Server SQL treat CHAR as a variable-length or fixed-length column?

Do other SQL implementations treat it in the same way?

• If you are going to have too many nulls in a column, what would be the best

data type to use?

• When columns are added to existing tables, what do they initially contain?

• What command would you use to add a column to a table in SQL Server?

• In SQL Server, which data type is used to store large object data types?

• If I do not need to store decimal places, what would be a good numeric data

type to use?

• I I need to store decimal places, but am not worried about rounding errors,

what would be a good data type to use?

• Should a column be defined as a FLOAT if it is going to be used as a primary key?

• What is a join? Why do you need a join?

• What is an INNER JOIN?

• Which clause[s] can be used in place of the JOIN in Server SQL?

• What is the Cartesian product?

• What would be the Cartesian product of a table with 15 rows and another table

with 23 rows?

• List some uses of the Cartesian product.

• What is an equi-join?

• What is a non-equi-join? Give an example of an non-equi-join.

• What is a self join? Give an example of a self join.

• What is a LEFT OUTER JOIN?

• What is a RIGHT OUTER JOIN?

• What is a CROSS JOIN?

• What is a FULL OUTER JOIN?

• Does Server SQL allow the use of *= to perform outer joins?

• What is the maximum number of rows that a self join can produce?

• For what kinds of joins will the associative property hold?

• What would be the Cartesian product of the two sets {a,b,c} and {c,d,e}?

• What are functions?

• What are aggregate functions? Give examples of aggregate functions.

What is another term for an aggregate function?

• What are row-level functions? Give examples of row-level functions.

• Is COUNT an aggregate function or a row-level function? Explain why.

Give at least one example of when the COUNT function may come in handy.

Does the COUNT function take nulls into account?

• Is AVG an aggregate function or a row-level function?

• What is the NULLIF function? Explain.

• How are ties handled in SQL Server?

• How does the DISTINCT function work?

• Are string functions (for example, SUBSTRING, RIGHT, LTRIM) aggregate

functions or row- level functions?

• What is the SUBSTRING function used for?

• What is the CHARINDEX function used for?

• What function would you use to find the leftmost characters in a string?

• What are the LTRIM/RTRIM functions used for?

• What function would produce the output in all lowercase?

• What function would you use to find the length of a string?

• What characters or symbols are most commonly used as wildcard characters in

SQL Server 2005?

• What is the concatenation operator in Server SQL 2005?

• What does the YEAR function do?

• What does the MONTH function do?

• What does the GEtdATE function do?

• What will the following query produce in SQL Server 2005?

o SELECT ('.....'+ names) AS [names]

o FROM Employee

• Does Server SQL allow an expression like COUNT(DISTINCT column_name)?

• How is the ISNULL function different from the NULLIF function?

• What function would you use to round a value to three decimal places?

• Which functions can the WITH TIES option be used with?

• What clause does the WITH TIES option require?

• What is the default date format in SQL Server 2005?

• How do dates have to be entered in Server SQL 2005?

• What function is used to convert between data types?

• What function is useful for formatting numbers?

• What function is useful for formatting dates?

• Which has precedence, AND or OR?

• Why do we need derived structures?

• What is a view?

• List some advantages of using views.

• List some advantages of using temporary tables.

• Can temporary tables replace views in all cases?

• What is the difference between a view and temporary table?

• What is the difference between a local temporary table and global temporary table?

• If data is changed in a view, is it changed in the original table?

• If data is changed in a temporary table, does it automatically change data in

the original table?

• What happens to local temporary tables after the session has been ended?

• What happens to global temporary table after the session has been ended?

• Which type of temporary table has a system-generated suffix attached to it?

What does this suffix mean?

• Why are inline views helpful?

• In SQL Server, is the ORDER BY clause allowed during the creation of a view?

• Is SELECT INTO allowed in a view? Why or why not?

• Where is the data stored in a view?

• How do you delete views?

• How do you delete a temporary table?

• Do you need to delete a local temporary table? Why or why not?

• Which operators have the highest/lowest precedence?

• In SQL Server, if a column of FLOAT data type were divided by a column of REAL

data type,what data type would the resulting column have? (Hint: refer to the

section on Data Type Preference.)

• Is an ORDER BY clause necessary when you use a DISTINCT? Why or why not?

• What are the major differences between the UNION operation and the JOIN operation?

• What is the major difference between the UNION and the UNION ALL?

• What major set operator does SQL Server 2005 not have? How can these problems

be resolved?

• What does union compatibility mean?

• What data types are union-compatible?

• What is the maximum number of rows that can result from a UNION of two tablesone

with 5 rows and the other with 6 rows?

• How can a UNION be used to implement an outer join? Explain.

• Does SQL Server 2005 support the MINUS operation? How can this be resolved? Give examples.

• What is a full outer join? Does SQL Server 2005 directly support a full outer join?

• Do you need the same number of columns to perform a union?

• Do you need the same data types to perform a union?

• Do you need the same number of columns to perform a join?

• From the examples given in the chapter, what does the UNION JOIN appear to do?

• If a VARCHAR column were unioned with a CHAR column, what would the resulting

column be?

• What does set compatibility mean?

• What is the maximum number of rows that can result from a INTERSECT of two

tablesone with 5 rows and the other with 6 rows?

• Do you need the same number of columns to perform an INTERSECT operation?

• Do you need the same data types to perform an INTERSECT operation?

• What is a subquery?

• Which part of the query/subquery is considered the inner query, and which part

is considered the outer query?

• Can a subquery always be done as a join? Why or why not?

• When writing a query that will have a subquery, how do you determine which

table/tables will go in the outer query?

• Which predicate can usually be reformulated into a join?

• When using operators, are many values acceptable from a result of a subquery?

• What can you do to insure a working subquery?

• What do aggregate functions do?

• How does the GROUP BY clause work?

• What is the difference between a GROUP BY and ORDER BY?

• What is the HAVING clause used for?

• Can the WHERE clause always be considered a substitute for the HAVING clause? Why or why not?

• Do functions of functions have to be handled in a special way in Server SQL 2005?

• Will nulls in grouped columns be included in a result set?

• How do aggregate functions treat nulls?

• Does the sequence of the columns in a GROUP BY clause have an effect on the end result?

• When would it not make sense to use the GROUP BY and DISTINCT functions together?

• Is GROUP BY affected by nulls?

• Which comes first in a SELECT statement, an ORDER BY or GROUP BY? Why?

• The GROUP BY and ________________ clauses are used together.

• What is a noncorrelated subquery?

• Which type of subquery can be executed on its own?

• Which part of a query is evaluated first, the query or the subquery?

• What are correlated subqueries?

• What does the EXISTS predicate do?

• What are considered universal qualifiers?

• Is correlation necessary when we use EXISTS? Why?

• Explain how the "for all" type SQL query involves a double-nested correlated subquery using the NOT EXISTS predicate.

• What is an index?

• Does an index slow down updates on indexed columns?

• What is a constraint?

• How many indexes does SQL Server 2005 allow you to have on a table?

• What command would you use to create an index?

• Is there a difference between an index and a constraint?

• What is the default ordering that will be created by an index (ascending or descending)?

• When can the UNIQUE option be used?

• What does the IGNORE NULL option do?

• How do you delete an index?

• What does the NOT NULL constraint do?

• What command must you use to include the NOT NULL constraint after a table has already been created?

• When a PRIMARY KEY constraint is included in a table, what other constraints does this imply?

• What is a concatenated primary key?

• How are the UNIQUE and PRIMARY KEY constraints different?

• What is a referential integrity constraint? What two keys does the referential integrity constraint usually include?

• What is a foreign key?

• What does the ON DELETE CASCADE option do?

• What does the ON UPDATE NO ACTION do?

• Can you use the ON DELETE and ON UPDATE in the same constraint?

Top 60 Manual Testing Interview questions

2016-04-12T12:10:00.002-07:00

Top 60 Manual Testing Interview questions

Manual Testing Interview questions

Manual Testing is Process of Testing Software /Application we Built as part of software development process. In Manual Testing we will writing Test cases and will be testing different aspects of the software it includes Regression Testing , Functional Testing , System intregration testing (SIT) , User Acceptance Testing(UAT). Here i will be providing top 60 manual interview questions for freshers and expereinced

Manual Testing Interview Questions

1.differentiate between QA and QC?

QA:It is process oriented

it envolve in entire process of software developement.

Preventin oriented.

QC:

It is product oriented.

work to examin the quality of product.

Dedection orientd.

2.what is a bug?

A computer bug is an error, flaw, mistake, failure, or fault in a computer program that prevents it from working correctly or produces an incorrect result.

3.what is a test case?

Testcase is set of input values, execution preconditions,expected results and execution

postconditions, developed for a particular objective or test conditons, such as to exercise a paticular program path or to verify compliance with a specific requiremnt.

4.What is the purpose of test plan in your project?

test plan document is prepared by the test lead,it contains the contents like introduction,objectives,test stratergy,scope,test items,program modules user

procedures,features to be tested features not to tested approach,pass or fail criteria,testing process,test deliverables,testing,tasks,responsibilities,resources,schedu

le,environmental requirements,risks & contingencies,change management procedures,plan approvals,etc all these things help a test manager undersatnd the testing he should do &

what he should follow for testing that particular project.

5.When the relationship occur between tester and developer?

developer is the one who sends the application to the tester by doing all the necessary code in the application and sends the marshal id to the tester.The tester is the one who gives all the input/output and checks whether he is getting reqd output or not.A developer is the one who works on inside interfacing where as the tester is the one who works on outside interfacing

6.when testing will starts in a project?

the testing is not getting started after the coding.after release the build the testers perform the smoke test.smoke test is the first test which is done by the testing team.this is according to the testing team.but, before the releasing of a build the developers will perform the unit testing.

7.If a bug has high severity then usually that is treated as high priority,then why do priority given by testengineers/project managers and severity given by testers?

High severity bugs affects the end users ....testers tests an application with the users point of view, hence it is given as high severity.High priority is given to the bugs which affects the production.Project managers assign a high priority based on production point of view.

8.what is the difference between functional testing and regresion testing

functional testing is a testing process where we test the functionality/behaviour of each functional component of the application...i.e.minimize button,transfer button,links etc.i.e we check what is each component doing in that application...

regression testing is the testing the behaviour of the application of the unchanged areas when there is a change in the build.i.e we chk whether the changed requirement has altered the behaviour of the unchanged areas.the impacted area may be the whole of the application or

some part of the application...

10.do u know abt integration testing,how do u intregate diff modules?

integration testing means testing an application to verify the data flows between the module.for example, when you are testing a bank application ,in account balence it shows the

100$as the available balence.but in database it shows the 120$. main thing is "integration done by the developers and integration testing done by the testers"

11.do u know abt configuration management tool,what is the purpose of maintaining all the documents in configuration manage ment tool?

It is focused primarily on maintaining the file changes in the history.

Documents are subjected to change For ex: consider the Test case document .

Initially you draft the Test cases document and place it in Version control tool(Visual Source Safe for ex).Then you send it for Peer Review .They will provide some comments and that document will be saved in VSS again.Similary the document undergoes changes and all the changes history will be maintained in Version control.

It helps in referring to the previous version of a document.

Also one person can work on a document (by checking out) at a time.

Also it keeps track who has done the changes ,time and date.

Generally all the Test Plan, Test cases,Automation desgin docs are placed in VSS.

Proper access rights needs to be given so that the documents dont get deleted or modified.

12.How you test database and explain the procedure?

Database Testing is purely done based on the requirements. You may generalize a few features but they won't be complete. In general we look at

1. Data Correctness (Defaults)

2. Data Storage/Retreival

3. Database Connectivity (across multiple platforms)

4. Database Indexing

5. Data Integrity

6. Data Security

13.suppose if you press a link in yahooshopping site in leads to some other company website?how to test if any problem in linking from one site to another site?

1)first i will check whether the mouse cusor is turning into hand icon or not?

2)i will check the link is highlingting when i place the curosr on the link or not?

3)the site is opening or not?

4)if the site is opening then i will check is it opening in another window or the same window that the link itself exitst(to check userfriendly ness of the link)

5)how fast that website is opening?

6)is the correct site is opening according to the link?

7)all the items in the site are opeing or not?

8)all other sublinks are opening or not?

14.what are the contents of FRS?

F → Function Behaviours

R → Requirements (Outputs) of the System that is defined.

S → Specification ( How, What, When, Where, and Way it behavior's.

FRS → Function Requirement Specification.

This is a Document which contains the Functional behavior

of the system or a feature. This document is also know as EBS External Behaviour Specification - Document. Or EFS External Function Specification.

15.what is meant by Priority nad severity?

Priority means "Importance of the defect w.r.t cutomer requirement"

Severity means "Seriousness of the defect w.r.t functionality"

16.what is meant by Priority nad severity?

Severity:

1. This is assigned by the Test Engineer

2. This is to say how badly the devation that is occuring is affecting the other modules of the build or release.

Priority:

1. This is assigned by the Developer.

2. This is to say how soon the bug as to be fixed in the main code, so that it pass the basic requirement.

Eg., The code is to generate some values with some vaild input conditions. The priority will be assigned so based on the following conditions:

a> It is not accepting any value

b> It is accepting value but output is in non-defined format (say Unicode Characters).

A good example i used some unicode characters to generate a left defined arrow, it displayed correctly but after saving changes it gave some address value from the

stack of this server. For more information mail me i will let you know.

17.give me some example for high severity and low priority defect?

if suppose the title of the particular concern is not spelled corectly,it would give a negative impact.eg ICICC is spelled as a tittle for the project of the concern ICICI.then it is a high severity,low priority defect.

18.what is basis for testcase review?

the main basis for the test case review is

1.testing techniques oriented review

2.requirements oriented review

3.defects oriented review.

19.what are the contents of SRS documents?

Software requirements specifications and Functional requirements specifications.

20.What is difference between the Web application testing and Client Server testing?

Testing the application in intranet(withoutbrowser) is an example for client -server.(The company firewalls for the server are not open to outside world. Outside people cannot access the application.)So there will be limited number of people using that application.

Testing an application in internet(using browser) is called webtesting. The application which is accessable by numerous numbers around the world(World wide web.)

So testing web application, apart from the above said two testings there are many other testings to be done depending on the type of web application we are testing.

If it is a secured application (like banking site- we go for security testing etc.)

If it is a ecommerce testing application we go for Usability etc.. testings.

21.Explain your web application archtechture?

web application is tested in 3 phases

1. web tier testing --> browser compatibility

2. middle tier testing --> functionality, security

3. data base tier testing --> database integrity, contents

22.suppose the product/appication has to deliver to client at 5.00PM,At that time you or your team member caught a high severity defect at 3PM.(Remember defect is high severity)But the the client is cannot wait for long time.You should deliver the product at 5.00Pm exactly.then what is the procedure you follow?

the bug is high severity only so we send the application to the client and find out the severity is preyority or not. if its preyority then we ask him to wait.

Here we found defects/bugs in the last minute of the deliveryor realese date

Then we have two options

1.explain the situation to client and ask some more time to fix the bug.

2.If the client is not ready to give some some time then analyse the impact of defect/bug and try to find workarounds for the defect and mention these issues in the release notes as known issues or known limitations or known bugs. Here the workaround means remeady process to be followed to overcome the defect effect.

3.Normally this known issues or known limitations(defects) will be fixed in next version or next release of the software

23.Give me examples for high priority and low severity defects?

Suppose in one banking application there is one module ATM Facility. in that ATM facility when ever we are dipositing/withdrawing money it is not showing any conformation message but actually at the back end it is happening properly with out any mistake means only missing

of message . in this case as it is happenig properly so there is nothing wrong with the application but as end user is not getting any conformation message so he/she will be

confuse for this.So we can consider this issue as HIGH Priority but LOW Severity defects..

24.Explain about Bug life cycle?

1)tester->

2) open defect->

3)send to developer

4)->if accepted moves to step5 else sends the bug to tester gain

5)fixed by developer ->

6)regression testing->

7)no problem inbuilt and signoff

8)->if problem in built reopen the issue send to step3

25.How can you report the defect using excel sheet?

To report the defect using excel sheet

Mention : The Feture that been effected.

mention : Test Case ID (Which fail you can even mention any other which are dependency on this bug)

Mention : Actual Behavior

Mention : Expected Behavior as mentioned in Test Case or EFS or EBS or SRS document with section

Mention : Your Test Setup used during Testing

Mention : Steps to Re-Produce the bug

Mention : Additional Info

Mention : Attach a Screen Shot if it is a GUI bug

Mention : Which other features it is blocking because of this bug that you are unable to

execute the test cases.

Mention : How much time you took to execute that test case or follow that specific TC

which leaded to bug

26.If you have executed 100 test cases ,every test case passed but apart from these testcase you found some defect for which testcase is not prepared,thwn how you can report the bug?

While reporting this bug into bugtracking tool you will generate the testcase imean put the steps to reproduce the bug.

27.what is the diffn betn web based application and client server application

The basic difference between web based application & client server application is that the web application are 3 trier & client based are 2 trier.In web based changes are made at one place & it is refelected on other layers also whereas client based separate changes need be installed on client machine also.

28.what is testplan? and can you tell the testplan contents?

Test plan is a high level document which explains the test strategy,time lines and available resources in detail.Typically a test plan contains:

-Objective

-Test strategy

-Resources

-Entry criteria

-Exit criteria

-Use cases/Test cases

-Tasks

-Features to be tested and not tested

-Risks/Assumptions.

29.How many testcases can you write per a day, an average figure?

Complex test cases 4-7 per day

Medium test cases 10-15 per day

Normal test cases 20-30 per day

30.Who will prepare FRS(functional requirement documents)?

What is the importent of FRS?

The Business Analyst will pre pare the FRS.

Based on this we are going to prepare test cases.

It contains

1. Over view of the project

2. Page elements of the Application(Filed Names)

3. Proto type of the of the application

4. Business rules and Error States

5. Data Flow diagrams

6. Use cases contains Actor and Actions and System Responces

31.How you can decide the number of testcases are enough for testing the given module?

The developed test cases are coverd all the functionality of the application we can say testcases are enough.If u know the functionality covered or not u can use RTM.

32.What is the difference between Retesting and Data Driven Testing?

Retesting:it is manual process in which apllication will be tested with entire new set of data.

DataDriven Testing(DDT)-It is a Automated testing process inwhich application is tested with multiple test data.DDT is very easy procedure than retesting because the tester should sit and need to give different new inputsmanually from front end and it is very tedious and boring

prodedure.

33.what is regression testing?

After the Bug fixed ,testing the application whether the fixed bug is affecting remaining functionality of the application or not.Majorly in regression testing Bug fixed module and it's

connected modules are checked for thier integrity after bug fixation.

34.how do u test web application?

Web applicatio testing

web application shold have the following features like

1.Attractive User Interface(logos,fonts,alignment)

2.High Usability options

3.Securiry features(if it has login feature)

4.Database(back end).

5.Perfromance(appearing speed of the application on client system)

6.Able to work on different Browers(Browser compatibility)

,O.S compatibility(technicalled called as portability)

7.Broken link testing.........etc

so we need to follow out the following test strategy.

1.Functionality Testing

2.Performance Testing(Load,volume,Stress,Scalability)

3.Usability Testing

4.User Interface Testing(colors,fonts,alignments...)

5.Security Testing

6.Browser compatibility Testing(differnt versions and different browser)

7.Brokenlink and Navigation Testing

8.Database(backend)Testing(data integrity)

9.Portability testing(Multi O.s Support)....etc

35.how do u perform regression testing,means what test cases u select for regression

Regression testing will be conducted after any bug fixedor any functionality changed.

During defect fixing procedure some part of coding may be changed or functionality may be manipulated.In this case the old testcases will be updated or completely re written

according to new features of the application where bug fixed area.Here possible areas are old test cases will be executed as usual or some new testcases will be added to existing testcases or some testcases may be deleted.

36.what r the client side scripting languages and server side scripting languages

client side scripting langages are

javascript,VbScript,PHP...etc

Server side Scripting languages are

Perl,JSP,ASP,PHP..etc

Clent side scipting languages are useful to validate the inputs or user actions from userside or client side.

Server side Scripting languages are to validate the inputs at server side.

This scripting languages provide security for the application. and also provides dynamic nature to web or client server application

cleint side scripting is good because it won't send the unwanted input's to server for validation.from frontend it self it validated the user inputs and restricts the user activities and guides him

37.if a very low defect (user interface )is detected by u and the developer not compramising with that defect what will u do?

user interface defect is a high visibility defect and easy to reproduce.

Follow the below procedure

1.Reproduce the defect

2.Capture the defect screen shots

3.Document the proper inputs that you are used to get the defect in the derfect report

3.send the defect report with screen shots,i/ps and procedure for defect reproduction.

before going to this you must check your computer hard ware configuration that is same as developper system configuration.and anlso check the system graphic drivers are properly

installed or not.if the problem in graphic drivers the User interface error will come.

so first check your side if it is correct from your sidethen report the defect by following the above method.

38.if u r only person in the office and client asked u for some changes and u didn,t get what the client asked for what will u do?

Onething here is very important.Nobody will ask test engineer to change software that is

not your duty,even if it is related to testing and anybody is not there try to listen care fully if you are not understand ask him again and inform to the corresponding people immediately.

Here the cleint need speedy service,we(our company) should not get any blame from customer side.

39.how to get top two salaries from employee tables

Select * from emp e where 2>=(select count(*) from emp e where sal>e.sal) order by desc sal.

40.How many Test-Cases can be written for the calculator having 0-9 buttons, Add,Equalto buttons.The testcases should be focussed only on add-functionality but mot GUI.What are those test-cases?

Test-Cases for the calculator

so here we have 12 buttons totalie 0,1,2,3,4,5,6,7,8,9,ADD,Equalto -12 buttons

here u can press atleat 4 buttons at a time minimum for example 0+1= for zero u should press 'zero' labled buttonfor plus u should press '+' labled buttonfor one u should press 'one' labled buttonfor equalto u should press 'equalto' labled button 0+1=here + and = positions will not varyso first number position can be varied from 0 to 9 i.e from permutation and combinations u can fill that space in 10 waysin the same waysecond number position can be varied from 0 to 9 i.e from permutation and combinations u can fill that space in 10 ways

Total number of possibilities are =10x10=100

This is exhaustive testing methodology and this is not possible in all cases.

In mathematics we have one policy that the the function satisfies the starting and ending values of a range then it can satisfy for entire range of values from starting to ending.

then we check the starting conditions i.e one test case for '0+0=' (expected values you know thatis '0')then another testcase for '9+9='(expected values you know thatis '18')only two testcases are enough to test the calculator functionality.

41.what is positive and negative testing explian with example?

Positive Testing - testing the system by giving the valid data.

Negative Testing - testing the system by giving the Invalid data.

For Ex,an application contains a textbox and as per the user's Requirements the textbox should accept only Strings.By providing only String as input data to the textbox & to check whether its working properly or not means it is Positive Testing.If giving the input other than String means it is negative Testing..

42.How will you prepare Test plan. What are the techniques involved in preparing the Test plan.

Test plan means planning for the release. This includes Project background

Test Objectives: Brief overview and description of the document

Test Scope: setting the boundaries

Features being tested (Functionalities)

Hardware requirements

Software requirements

Entrance Criteria (When to start testing):

Test environment established, Builder received from developer, Test case prepared and reviewed.

Exit criteria (when to stop testing):

All bug status cycle are closed, all functionalities are tested, and all high and medium bugs are resolved.

Project milestones: dead lines

43.What are the Defect Life Cycle?

Defect life cycle is also called as bug life cycle. It has 6stages namely

1.new: found new bug

2.assigned: bud assigned to developer

3.open : developer is fixing the bug

4.fixed : developer has fixed the bug

5.retest: tester retests the application

6.closed/reopened: if it is ok tester gives closed stauselse he reopens and sends back to developer.

44.Expalin about metrics Management?

Metrics: is nothing but a measurement analysis.Measurment analysis and Improvement is one of the process area in CMM I L2.

45.What is performance Testing and Regression Testing?

Performance Testing:-testing the present wroking condition of the product

Regression Testing:-Regression Testing is checking for the newly added functionality causing any erros interms of functionality and the common functionality should be stable

in the latest and the previous versions

46.How do you review testcase?? Type of Review...

types of reviewing testcases depends upon company standards,viz..,

peer review,team lead review,roject manager review.

Some times client may also review the test cases reg what is approach following for project

47.In which way tester get Build A, BUild B, ....Build Z of an application, just explain the process..

After preparation of testcases project manager will release software release note in that Document there will be URL path of the website link from from that we will receive

the build In case of web server projects, you will be provided with an URL or a 92.168.***.*** (Web address) which will help you access the project using a browser from your system.

In case of Client server, the build is placed in the VSS (Configuration tool) which will help you get the .exe downloaded to your computer.

48.apart from bug reporting wat is ur involvement in projectlife cycle

As a Test engineer We design test cases,prepare testcases Execute Testcases, track the bugs, analyse the results report the bugs. invovled in regression testing, performance of system

testing system intergration testing At last preparation of Test summary Report

49.contents of test report

There are two documents,which should be prepared at particual phase.

1.Test Results document.

2.Test Report document.

Test Results doc will be preapred at the phase of each type of Testing like FULL FUNCTIONAL TEST PASS,REGRESSION TEST PASS,SANITY TEST PASS etc...Test case execution againest

the application.Once you prepared this doc,we will send the doc to our TL and PM.By seeing the Test Results doc ,TL will come to know the coverage part of the testcase.Here I

am giving you the contents used in the Test Results doc.

1.Build No

2.Version Name

3.Client OS

4.Feature set

5.Main Feature

6.Defined Testcases on each feature.

7.QA engineer Name

8.Test ecases executed.(Includes pass and fail)

9.Testcases on HOLD(Includes blocking testcases and deferred Testcases)

10.Covereage Report(Which includes the coverage ratings in % ,like % of testcases covered,% of testcases failed)

Coming to Test report,generally we will prepare Test report ,once we rolled out the product to our client.This document will be prepared by TL and delivered to the client.Mainly,this document describes the what we have done in the project,chievements we have reached,our

learnings in throughout the project etc...The other name for Test report is Project Closure Report and we will summerize the all the activities,which have taken place in through out the project.Here I am giving your the contents covered in the Test Report.

1.Test Environment(Should be covered the OS,Application or webservers,Mahchine names,Database,etc...)

2.Test Methods(Types of Tests,we have done in the project like Functional Testing,Platform Testing,regression Testing,etc..

3.Major areas Covered.

4.Bug Tracking Details.(Includes inflow and outflow of the bus in our delivered project)

5.Work schedule(When we start the testing and we finished)

6.Defect Analasys

6.1 Defects logged in different types of tests like Funcational Test,regressiion Test as per area wised.

6.2 State of the Defects at end of the Test cycle.

6.3 Root cause analysys for the bugs marked as NOT A BUG.

7.QA observations or learnings throught the life cycle.

50.write high level test cases

Write all the testcases under high level TC,which can be covered the main functionalities like

creation,edition,deletion,etc....as per prescribed in the screen.

Wrtie all the testcases under low level TC,which can be covered the screen,like input fields are displayed as per the requirements,buttons are enabled or disabled,and testcase for low priority functionalities.

Example a screen contains two edit boxes login and password and a pust buttons OK and Reset and check box for the label "Remember my password".Now let us write high level TC

and low level test cases.

HIGH LEVEL TC

1.Verify that User is able to login with valid login and valid password.

2.Verify that User is not able to login with invalid login and valid password.

etc...

3.Verify that Reset button clears the filled screen.

4.Verify that a pop up message is displayed for blank login.

etc...

etc..

LOW LEVEL TC

1.Verify that after launching the URL of the application below fields are displayes in the screen.

1.Login Name 2.Password.3.OK BUTTON 4.RESET button etc..

5.check box,provided for the label "remember my pwd" is unchecked.

2.Verify that OK button should be disabled before selecting login and passwrod fields.

3.Verify that OK button should ne enabled after selecting login and password.

4.Verify that User is able to check the check box,providedfor the label "remember my pwd".

etc..

In this way,we can categorise all the testcases under HIGH LEVEL and LOW LEVEL.

51.wat is test scenario

Test scenario will be framed on basis of the requrement,which need to be checked.For that,we will frame set of testcases,in other terms,we can say all the conditions,which can be determined the testing coverage againest business requirement.

Please see the below example,which is exactly matched to my explanation.

As we know all most all the application are having login screen,which contains login name and password.Here is the test scenario for login screen.

Scenario: USER'S LOGIN

Condtions to be checked to test the above scenario:

----------------------------------------------------

1.Test login field and Password fields indicisually.

2.Try to login with valid login and valid password.

3.Try to login with invaling login and valid pwd. etcc........................................

52.wat is build duration

it is a tine gap between old version build and new version build in new version build some new extra features are added

53.wat is test deliverables

Test deliverables are nothing but documents preparing after testing like test plan document testcase template bugreport templateTest deliverables will be delivered to the client not only for the completed activities ,but also for the activites,which we are implementing for the better productivity.(As per the company's standards).Here I am giving you some of the Test deliverables in my project.

1.QA TestPlan

2.Testcase Docs

3.QA Testplan,if we are using Automation.

4.Automation scripts

5.QA Coverage Matrix and defect matrix.

6.Traceability Matrix

7.Test Results doc

8.QA Schesule doc(describes the deadlines)

9.Test Report or Project Closure Report.(Prepared once we rolled out the project to client)

10.Weekly status report(sent by PM to the client)

11.Release Notes.

54.wat is ur involvement in test plan

Test lead is involved in preparing test plan test entgineers are no way related in preparing test plan role TE is testcase design ,and execution and bugtraking and reporting them Genarally TL is involed in preparation of the TestPlan.But it is not mandatory only TL will take main part in the preparaion of the TP.Test engineer can suggest to TL,if he(or) she has good understanding on project and resources,if he or she has more exp with the project,if TL is wrongly given deadlines.If your suggestions are valid,TL will incorporate all of them to the TestPlan.But in most of the companies Test engineers are just audians.

55.which test cases are not to be automated

All the test cases which are related to a feature of the product, that keeps on changing (there are always some or the other enhancements in it). Frequent enhancements may change the UI, add/remove few controls. Hence such cases, if automated, would involve lot of a intenance

56.if a project is long term project , requirements are also changes then test plan will change or not?why

Yes..definitely. If requirement changes, the design documents, specifications (for that particualr module which implements the requiremnts) will also change. Hence the test plan would also need to be updated. This is because "REsource Allocation" is one section in the test

plan. We would need to write new test cases,review, and execute it. Hence resource allocation would have to be done accordingly. As a result the Test plan would change

57.explain VSS

Virtual Sourse Safe...

After complition of all phages From devolopment side devoloper store the code in devolopment folder of VSS,Testing team copying code from that folder to testing folder, after compliting above phages from testing, testers put the build in base line folder.It is version contrrole Tool

Mainly useful to devoloper, to storing code and maintains version Copying a code from VSS By devoloper is called CHECK-IN Upload the code in to VSS is called CHECK-OUT.

58.who will assign severity & priority

the tester/dev should give the priority based on severity of the bug

Severity means: is the impact of the bug on the app.i.e seriousness of the bug interms of the functionality.

Priority means: is how soon it should get fixed i.e importance of the bug interms of customer

59.What is the Difference between Stub Testing and Driver Testing?

stub testing:

In top down approach,a core module is developed.to test that core module, small dummy modules r used.so stubs r small dummy modules that test the core module.

Driver testing:

in bottom up approach, small modules r developed.to test them a dummy core module called driver is developed.

60.What is a "Good Tester"?

Is one who tries to break the developers software and in a position to venture the bugs. so that atleast 80% bugs free software can deliver.

What is Database testing?

Data bas testing basically include the following.
1)Data validity testing.
2)Data Integrity testing
3)Performance related to data base.
4)Testing of Procedure, triggers and functions.
for doing data validity testing you should be good in SQL queries
For data integrity testing you should know about referential integrity and different constraint.
For performance related things you should have idea about the table structure and design.
for testing Procedure triggers and functions you should be able to understand the same.

What we normally check for in the Database Testing?
In DB testing we need to check for,
1. The field size validation
2. Check constraints.
3. Indexes are done or not (for performance related issues)
4. Stored procedures
5. The field size defined in the application is matching with that in the db.

How to Test database in manually? Explain with an example
Observing that operations, which are operated on front-end is effected on back-end or not.
The approach is as follows:
While adding a record thru' front-end check back-end that addition of record is effected or not. So same for delete, update,...... Ex:Enter employee record in database thru' front-end and check if the record is added or not to the back-end(manually).