iPhonePixelPost Apple News and Tutorials

Windows Command Line Utility to Jailbreak iPhone 4S and iPad 2 is Released

2012-01-21T12:36:00.000-05:00

The iPhone Dev-Team has released an updated command line utility that can perform a jailbreak of the iPhone 4S and iPad 2 using Windows.

Version 0.4.3 adds support for Windows users. It also makes the "-j" jailbreak option much more functional :) See the README.txt for usage.

The command line interface should only be run by advanced users and is primarily for debugging issues with the jailbreak. Most users should wait for the Chronic Dev-Team to release a Windows version of Absinthe.

If you want to give the CLI a go, you can download it here. Make sure to read the included readme.txt for usage instructions.

cinject -i payloads/jailbreak.mobileconfig
cinject -j payloads
cinject -w
toggle VPN on and look for the "pod2g is in da house!" syslog message

To be notified when Absinthe for Windows is available you can follow us on Twitter, Facebook, RSS, or check out the All Jailbreak tutorials page.

Read More

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPhone 4S Using Absinthe Mac 5.0, 5.0.1

2012-01-21T12:32:00.000-05:00

These are instructions on how to perform an untethered jailbreak of your iPhone 4S using Absinthe for Mac.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.

Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.

Step Three
As prompted, connect your iPhone 4S to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.

Step Four
Click the Jailbreak button to begin

Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.

Step Six
You will be informed that the jailbreak is 'Almost done'.

Step Seven
On your device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.

If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.

You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPad 2 Using Absinthe Mac 5.0.1

2012-01-21T12:30:00.000-05:00

These are instructions on how to perform an untethered jailbreak of your iPad 2 running iOS 5.0.1 using Absinthe for Mac.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.

Step One
Download the latest version of Absinthe from here.

Step Two
Double click to extract the downloaded archive and launch the Absinthe application.

Step Three
As prompted, connect your iPad 2 to the computer via USB. Make sure to remove any passcodes or VPN settings you've previously set.

Step Four
Click the Jailbreak button to begin

Step Five
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.

Step Six
You will be informed that the jailbreak is 'Almost done'.

Step Seven
On you device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.

If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.

You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!

*If you are still unable to succeed please be patient as the dev team's servers are being hammered!

Where to Download Absinthe From

2012-01-21T12:27:00.001-05:00

Below you can find links to download Absinthe, a tool released by the Chronic Dev-Team to jailbreak the iPhone 4S and iPad 2.

Absinthe 0.1.2-2 (Mac): absinthe-mac-0.1.2-2.zip
Absinthe 0.1.2-1 (Mac): absinthe-mac-0.1.2-1.zip

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

Planetbeing, MuscleNerd, and P0sixninja Help Pod2g With A5 Untethered Jailbreak

2012-01-06T20:42:00.000-05:00

Pod2g has announced that Planetbeing, MuscleNerd, and P0sixninja have joined his effort to release an untethered jailbreak of the iPhone 4S and iPad 2.

@planetbeing, the legendary hacker behind iPhone Linux and lot of jailbreaks has joined the A5 research! The famous @MuscleNerd, the leader of the iPhone Dev Team, who did a lot of tests for Corona and whom integrated it and made it simple in redsn0w is willing to help also. And last, but not least @p0sixninja, the leader of the Chronic Dev Team, and my partner for years on iPhone security research has started to code and fuzz the Apple sandbox.

We now have a dream team to find a path for a public release of the A5 jailbreak. Cross your fingers.

Yesterday, pod2g posted a FAQ on why the A5 jailbreak had not been released yet. The key reason being that the exploit used to inject the untethering files to the 4S relies on having a developer account.

With the help of planetbeing, MuscleNerd, and p0sixninja, pod2g is hoping to find a distributable exploit to remount the system partition read/write and to set Corona files at the correct places.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g Posts FAQ on iPhone 4S and iPad 2 Untethered Jailbreak

2012-01-05T18:28:00.000-05:00

Pod2g has posted on his blog to answer some questions about the iPhone 4S and iPad 2 untethered jailbreak.

How could pod2g have an untethered 4S and dev teams still haven't released tools to achieve this at home ?
The exploit I used to inject the untethering files to the 4S relies on having a developer account, and can't be released publicly. It's the same reason why @MuscleNerd has an iPad 2 tethered jailbreak but couldn't distribute it. So, we need to find a distributable exploit to remount the system partition read/write and to set Corona files at the correct places.

Why A4 version of Corona was easier to release ?
Because a tethered jailbreak is a good way to install Corona!

Why don't you do a tethered jailbreak then ?
A tethered jailbreak also relies on an exploitable vulnerability that we still haven't found yet !

Earlier this week, pod2g posted that he had made good progress on the jailbreak for A5 devices and said with some luck we could expect a release in a week.

Read more

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g Makes Progress With A5 Jailbreak, Release Could Come in a Week!

2012-01-03T20:27:00.000-05:00

Pod2g has just tweeted some interesting information regarding the A5 jailbreak. Apparently, pod2g has made good progress on the jailbreak for A5 devices and claims that if lucky, we could expect it in a week!

I made a step today for the A5. With some luck we could expect a release in a week.

Keep in mind though, there are still some roadblocks ahead and the ETA can always get pushed back. In the meantime, you can jailbreak any pre-A5 device on 5.0.1 using our jailbreak tutorial page located here.

We will keep you updated on the A5 jailbreak as well. You can follow us on @limerain_com, Facebook page , RSS.

via Pod2g

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

How to Perform an Untethered Jailbreak of Your iPhone 4 Windows 5.0.1

2011-12-27T12:39:00.000-05:00

These are instructions on how to perform an untethered jailbreak of your iPhone 4 on 5.0.1 using RedSn0w for Windows. The Mac version of this tutorial is here.

This procedure will cause you to upgrade your baseband potentially ruining your chances for an unlock. Please follow a Windows tutorial on how to update to iOS 5.0.1 using a custom ipsw if you need an unlock.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0.1 firmware if you are already on iOS 5.0.1)

Extract the RedSn0w zip file by double clicking it.

Step Two: (You can skip this step if iOS 5 is already installed on your device)
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.

iTunes will now update your iPhone to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

**Windows 7 users may want to try running the redsn0w executable mode as an administrator in Windows Vista compatibility. You can do this by right clicking the executable and selecting Properties from the contextual menu.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPhone into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPhone will now reboot

Step Eight
RedSn0w will now prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

*As usual a big thanks to the iPhone Dev-Team, Pod2g, and Geohot for their hard work and contribution to the iPhone community.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g Demos Untethered iOS 5.0.1 Jailbreak on the iPhone 4

2011-12-21T18:36:00.000-05:00

Pod2g has posted a video demonstrating an untethered jailbreak of iOS 5.0.1 on the iPhone 4.

Here is a new video demo of the current status of the 5.0.1 jailbreak running on an iPhone 4. This is meant to reassure people that were thinking it only works on older iPods.

The jailbreak is near ready for prime time (excluding 4S and iPad 2). Patches are the same as redsn0w's. Expect the same level of stability. Some more days to wait. Be patient, we're doing our best.

As usual you can follow us on @limerain_com, Facebook page , and RSS to be notified of any progress updates.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g Resolves Cache Troubles With the iPhone 4S Untethered Jailbreak

2011-12-20T08:52:00.000-05:00

Pod2g has resolved the cache troubles with the iPhone 4S untethered jailbreak, according to a new progress update.

---
OK, figured it out, the A5 cache is not a problem anymore. I sorted it out by doing the untether in a single thread and by flushing all the dcache then all the icache in a row at a strategical point of the process. It took me like a hundred of tests to find the key. Hard for the nerves.

For the tech guys, here is a link explaining issues related to self modifying code ( or code patching ) on the ARM platform : http://blogs.arm.com/software-enablemen ... ying-code/

Another news : I discussed with @saurik today about the launchd boot process, and he's found one missing piece of the puzzle I needed to have a perfectly stable jailbreak. He's definitly one of the best iOS gurus out there. Thank you saurik!
---

Things are definitely progressing. We'll let you know when we have more news via @limerain_com, Facebook page , and RSS.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Update on the Untethered Jailbreak for the iPhone 4S

2011-12-19T15:10:00.000-05:00

Pod2g has issued an update on the progress of the untethered jailbreak for the iPhone 4S.

For those who haven't been tracking his progress, last week pod2g successfully untethered the iPhone 4, iPhone 3GS, iPod 4G, iPod 3G, iPad 1, and Apple TV 2 (4.4.3). He has now turned his attention to the iPhone 4S and the iPad 2.

Here are the news of the 4S week-end. The untether fails right now because I'm having processor cache issues. I'm close, but I can't figure out what happens. It certainly has something to do with the Cortex-A9 cache management.

I could sort it out quick, it's a matter of chance. I'll report you my progress tomorrow.

As usual we will keep you up to date with the latest. You can follow Us via @limerain_com, Facebook page , or RSS.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Progress Report on the iOS 5.0.1 Untethered Jailbreak

2011-12-15T18:31:00.000-05:00

Pod2g has issued a new progress report on the iOS 5.0.1 untethered jailbreak in which he reveals that the jailbreak for old devices is being packaged for release.

Thanks to donators, pod2g has received enough financial support to purchase an iPhone 4S and iPad 2 and will soon start working on the jailbreak for those devices.

---
Hello my friends,I know that I've been silent yesterday and that it was annoying.

Sorry for this, but I had to organize things for the release.
Also, I've tested iPad 1 and it worked.
Today I hope I can test a 3Gs.

BTW: please don't propose to be a beta tester because I'm too paranoid, fearing leaks.

Now the time to finalize the jailbreak for old devices, fix some stability issues and package the whole.That will take some days.

In the meanwhile, I'm starting the research for iPad 2 and 4S.I'll take you informed of my progress.

Finally, I want to thank all who donated. I now can buy both devices! I don't know what to say.

Thank you very much my friends.
---

Stay tuned to Limerain on @limerain_com, Facebook page , or RSS for news on when the jailbreak will be released.

Early iOS 5.0 Demo Video

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Untethered Jailbreak Completed for iPhone 4/3GS, iPod Touch 4G/3G, iPad 1, ATV 2 iPhone 4s and iPad 2 I in te works

2011-12-14T18:17:00.000-05:00

Pod2g has announced the completion of an untethered iOS 5.0.1 jailbreak of the iPhone 4, iPhone 3GS, iPod 4G, iPod 3G, iPad 1, and Apple TV 2 (4.4.3).

Previously, pod2g said that he would work on jailbreaking the iPhone 4S and iPad 2 after finishing the jailbreaks for the above devices.

Tons of questions from my nice followers. Too early to answer. Will work on iOS 5.0.1, will try iPad 2 and 4S after others are ready.

Let's hope he is successful with the iPhone 4S and iPad 2 as well. Stay tuned to Limerain on Twitter, Facebook, or RSS for news on when jailbreak will be released.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

iPhone 4 Gets Untethered Jailbreak on iOS 5.0.1

2011-12-12T07:38:00.000-05:00

Pod2g has announced that he's successfully performed an untethered jailbreak on an iPhone 4 running iOS 5.0.1.

Got an untethered iPhone 4 running iOS 5.0.1. Feel free to update.

Of course, if you want to SIM unlock, don't update using Apple's original FW nor update OTA.

This is great news! We strongly recommend that everyone use iFaith or TinyUmbrella to save their iOS 5.0.1 SHSH Blobs.

You can find instructions on how to do that here: Windows, Mac

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g on the Untethered Jailbreak for iOS 5

2011-12-09T21:09:00.000-05:00

Pod2g has started a new blog to chronicle his work on the iOS 5 untethered jailbreak he demonstrated earlier today.

Here's the first post:

---
Today I succeed in jailbreaking my iPod 3G. The exploit is user-land, rely on a user ROP payload and a kernel write anywhere exploit.

I can't give much details right now, but here are the next steps :
- upgrade the iPod 3G to iOS 5.0.1
- do the same on iPhone 4 / iOS 5.0.1
- then iPad 1 & iPod 4G

At every step, the exploit code needs certainly to be reworked, but I really don't know right now. Next, I'll return to the research for iPad 2 and iPhone 4S. I don't know if I gonna release first for other devices or not. I've to think about it. Feel free to give your opinion.
---

We'll keep you up to date with news on pod2g's progress.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Unlock Your iPhone 4S Without Jailbreaking?

2011-11-17T21:47:00.001-05:00

A new unlock method has surfaced today which claims to work without the need of any software, hardware or jailbreak.

A bug in iOS 5 discovered by Michael Capozzi theoretically allows any iPhone 4S to be unlocked to any GSM carrier. However, Capozzi says he was only able to test with T-Mobile.

We are currently working towards independent confirmation of his method. It does require you to have an active T-Mobile SIM card (with data working). Remember it must be cut to micro-SIM size to fit the iPhone 4S.

The Steps:
● Insert original carrier AT&T SIM card
● Dial 611 for AT&T customer service hotline and drop the call
● Turn on Airplane Mode
● Take out AT&T SIM card
● Insert T-Mobile SIM card
● Make sure WiFi is off ( also tap on 'Forget this Network" to make sure it doesn't connect automatically later)
● Switch off Airplane Mode and iPhone will search for network. This is followed by the Apple splash screen appearing.
● Activation Required will be displayed on the screen
● EDGE network will activate automatically – notice the 'E' on the top left corner of the screen
● Wait for about 20-30 seconds and turn off the phone
● Turn on iPhone and the same Activation Required screen will be displayed
● When you see one signal bar, tap on Use Cellular Connection
● Eject SIM card
● Activation Required screen will be displayed the second time
● Insert SIM card
● Unlocked!

We are getting some confirmation reports. If you are able to test this, please let us know your results. Remember this method may unlock your device; however, it will not last through a reboot. So while not practical for day to day use. It may benefit those traveling abroad.

Update:
Gizmodo is claiming some confirmation as well.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Pod2g Discovers Vulnerability That Can Untether the iOS 5 Jailbreak!

2011-11-07T15:33:00.000-05:00

Pod2g has announced the discovery of a bug that can untether the iOS 5 jailbreak!

Hey jailbreaking friends, I've found a bug that can untether iOS 5. Don't expect a release soon, but I'm gonna work hard in it.

Pod2g has been behind the discovery of numerous other vulnerabilities including SHAtter.

We'll keep you up to date with pod2g's progress on the untethered jailbreak of iOS 5. You can follow us on Twitter or Facebook for instant notifications.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Scott Forstall Gets Profiled as a Mini-Steve

2011-10-13T14:08:00.000-04:00

Business Week has published an in-depth profile of Scott Forstall, Senior Vice President of iOS Software at Apple.

Described as what may be the 'best remaining proxy for the voice of Steve Jobs', Forstall, 42, heads iOS, the operating system which runs on mobile devices accounting for 70% of Apple revenue.

"He was as close to Steve as anybody at the company," says Andy Miller, who formerly headed iAd. "When he says stuff, people listen."

In many ways, Forstall is a mini-Steve. He's a hard-driving manager who obsesses over every detail. He has Jobs's knack for translating technical, feature-set jargon into plain English. He's known to have a taste for the Mercedes-Benz SL55 AMG, in silver, the same car Jobs drove, and even has a signature on-stage costume: black shoes, jeans, and a black zippered sweater. (He favors Reyn Spooner Hawaiian shirts for normal days at the office.)

Forstall is like Steve in one other important way: He can be, in what some of his co-workers might call an understatement, a polarizing figure. He's won the intense loyalty and allegiance of many of his underlings, and his engineers are among the hardest workers at the company. At the same time, according to several former Apple employees, a number of high-ranking executives have left the company because they found working with Forstall so difficult. That sentiment, it seems, has not been limited to fellow executives. One former member of the iOS team, a senior engineer, describes leaving Apple after growing tired of working with Forstall and hearing his common refrain: "Steve wouldn't like that."

Interestingly, Business Week notes that Forstall may have been somewhat responsible for the lost iPhone 4 prototype. Apparently, it was Forstall who persuaded Jobs to let dozens of his engineers to carry prototypes in order to better test its network performance and minimize dropped calls.

Hit this link to continue reading the entire six page profile...

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

How to Jailbreak Your iPhone 3GS Using RedSn0w for Mac 5.0

2011-10-13T00:49:00.000-04:00

These are instructions on how to jailbreak your iPhone 3GS on the iOS 5.0 firmware using RedSn0w for Mac.

This procedure will cause you to upgrade your baseband potentially ruining your chances for an unlock. Please wait until we have posted a tutorial on how to update to iOS 5 using a custom ipsw if you need an unlock. The jailbreak is also tethered for all devices except the old bootrom iPhone 3GS which means you will need to connect your device to the computer each time you reboot. Finally, it may be prudent to save your SHSH Blobs by following this tutorial before continuing.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w 0.9.9b5 from here and place it in the Pwnage folder. Likewise, download the 5.0 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0 firmware if you are already on iOS 5.0)

Extract the RedSn0w zip file by double clicking it.

Step Two: (Skip this step if you're on iOS 5 already)
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Option and click the Restorebutton. Restore is preferred as it won't create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choosebutton to continue.

iTunes will now update your iPhone to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPhone into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPhone will now reboot

Step Eight
RedSn0w will prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered.

Step One
From the main RedSn0w menu click the Extras button.

Step Two
Select Just boot from the Extras menu to just boot tethered.

*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPhone 4 Using RedSn0w for Mac 5.0

2011-10-13T00:38:00.002-04:00

These are instructions on how to jailbreak your iPhone 4 on the 5.0 firmware using RedSn0w for Mac.

This procedure will cause you to upgrade your baseband potentially ruining your chances for an unlock. Please wait until we have posted a tutorial on how to update to iOS 5 using a custom ipsw if you need an unlock. The jailbreak is also tethered which means you will need to connect your device to the computer each time you reboot. Finally, it may be prudent to save your SHSH Blobs by following this tutorial before continuing.
If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w 0.9.9b5 from here and place it in the Pwnage folder. Likewise, download the 5.0 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0 firmware if you are already on iOS 5.0)

Extract the RedSn0w zip file by double clicking it.

Step Two: (You can skip this step if iOS 5 is already installed on your device)
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down Option and click theRestore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.

iTunes will now update your iPhone to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPhone into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPhone will now reboot

Step Eight
RedSn0w will now prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered.

Step One
From the main RedSn0w menu click the Extras button.

Step Two
Select Just boot from the Extras menu to just boot tethered.

*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com And like our Facebook page www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPod Touch 3G Using RedSn0w on Mac 5.0

2011-10-12T15:53:00.000-04:00

These are instructions on how to jailbreak your iPod Touch 3G on the iOS 5.0 firmware using RedSn0w for Mac.
This jailbreak is tethered which means you will need to connect your device to the computer each time you reboot. Finally, it may be prudent to save your SHSH Blobs by following this tutorial before continuing.
If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w 0.9.9b6 from here and place it in the Pwnage folder. Likewise, download the 5.0 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0 firmware if you are already on iOS 5.0)

Extract the RedSn0w zip file by double clicking it.

Step Two: (Skip this step if you're on iOS 5 already)
Connect your iPod to the computer and launch iTunes.

Select your iPod from the list of devices on the left. Now hold down Option and click the Restore button. Restore is preferred as it won't create any wasted space on your iPod.

Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choosebutton to continue.

iTunes will now update your iPod to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPod into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPod will now reboot

Step Eight
RedSn0w will prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPod will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered.

Step One
From the main RedSn0w menu click the Extras button.

Step Two
Select Just boot from the Extras menu to just boot tethered.

*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

How to Jailbreak Your iPad 1 Using RedSn0w on Windows 5.0

2011-10-12T14:59:00.000-04:00

These are instructions on how to jailbreak your iPad 1 on the iOS 5.0 firmware using RedSn0w for Windows. The Mac version of this tutorial is here.

This jailbreak is tethered which means you will need to connect your device to the computer each time you reboot. Finally, it may be prudent to save your SHSH Blobs by following this tutorial before continuing.
If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w 0.9.9b6 from here and place it in the Pwnage folder. Likewise, download the 5.0 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0 firmware if you are already on iOS 5.0)

Extract the RedSn0w zip file by double clicking it.
s

Step Two: (Skip this step if you're on iOS 5 already)
Connect your iPad to the computer and launch iTunes.

Select your iPad from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPad.

Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choosebutton to continue.

iTunes will now update your iPad to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.

**Windows 7 users may want to try running the redsn0w executable mode as an administrator in Windows Vista compatibility. You can do this by right clicking the executable and selecting Properties from the contextual menu.

Step Four
Once RedSn0w opens click the Jailbreak button

Step Five
Plug your iPad into the computer and make sure its OFF then click the Next button

Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Seven
Your iPad will now reboot

Step Eight
RedSn0w will prepare the jailbreak data.

Step Nine
Select Cydia from the list of options and click Next.

Step Ten
Your iPad will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.

Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPad finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.

BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered.

Step One
From the main RedSn0w menu click the Extras button.

Step Two
Select Just boot from the Extras menu to just boot tethered.

*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

Activator Update Brings New Twitter and Notification Center Actions

2011-10-11T23:48:00.000-04:00

Ryan Petrich has released Activator 1.5.7 which brings support for iOS 5 and new Twitter and Notification Center actions.

Activator is a centralized gestures, button and shortcut management for iOS.

Whats New:
● Support iOS 5.0 GM
● Add "Compose Tweet" and "Show Notification Center" actions on iOS5.0
● Add "Show Icon" option on the root settings pane
● Update localizations
● Store menu preferences alongside standard preferences
● Optimize sending activator:didChangeToEventMode: for improved performance
● Fixed SpringBoard eating single press home event if folder is open or icons are somehow in edit mode
● Support activating spotlight while a folder is open

You can download Activator from the BigBoss Cydia repository.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Facebook Finally Launches Its iPad App!

2011-10-11T21:01:00.000-04:00

Facebook has finally launched its much anticipated app for the iPad.

The site has created a launch page for the new app which can be viewed here. It's just now propagating through the App Store so go check if it's live for you yet.

A New Way to Experience Facebook
● Enjoy bigger, better photos
Your photos take on new life on the iPad. They're big, high-res and easy to flip through-like a real photo album.

● Focus on what matters
With less on the screen, it's easier to zoom in on your friends' photos, updates and stories.

● Navigate anywhere, fast
Just tap, slide or pinch to get from one screen to another and back again in no time.

● Never lose your place
Use simplified navigation to send a message, see your notifications or browse your bookmarks without switching screens.

● Play games on the go
Play your favorite Facebook games wherever you are, and on a bigger screen.

● Tap to send messages
A simple dropdown menu makes it easy to scan and send messages without visiting your inbox.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

iPhone Controlled Garage Door Opener

2011-10-11T15:52:00.000-04:00

The Craftsman AssureLink garage door opener allows you to monitor and operate you garage door opener using you web enabled smart phone or computer utilizing the AssureLink Internet Gateway. Timer-to-Close allows you to program the garage door opener to close automatically after one, five or 10 minutes (a custom setting of up to 99 minutes is available on #3043).

Alert-to-Close ensures the highest level of safety, the garage door opener lights will flash and a warning alarm will sound when closing the door through the AssureLink Gateway or the Timer-to-Close features insuring anyone in the area is notified that the door is closing. The Tri Frequency Radio system virtually eliminates the effects of interference caused by products in and around the home, helping to make sure customers can access the garage every time and from the greatest distance.

Energy Efficient Uses approximately one watt of power when the opener is in sleep mode, making the unit more environmentally friendly. The units are compatible with other home activation products enabled with MyQ technology. The premium DC motor are designed for ultra quiet operation and soft-start/stop performance Chain Drive system is manufactured for years of dependable operation. 2 Security+ 3-function remotes are perfect for multi-car families.

Premium Motion Detecting Control Console opens and closes the door from inside garage and control the Timer-to-Close feature. The console senses your presence and turns on opener lights automatically. Provides light and lock settings. Wireless keyless entry pad allows entry into garage without a key or remote using a secure 4-digit programmable PIN. Includes the convenient one button to close feature. 200 watts of lighting, light (up to 100W) turns on automatically whenever door opens or closes or safety reversing sensors are obstructed. Anti-Burglary Coding rolling code changes every time button on the remote is pushed. PosiLock System securely locks door when it is down preventing intruders from entering garage. Manual Release Capability allows you to manually open or close garage door.

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4