IT Weirdo

[Repost] Avanset VCE Exam Simulator Pro v1.1.2 (Cracked)

2014-08-14T18:27:00.003+08:00

Hi Everyone,

Looking for newer Visual CertExam Suite??

Now they changed to Avanset VCE Exam Simulator...
Version 1.1.2 (latest)

You may download from these few link

LINK1

LINK2

LINK3

Password to unzip the files
Link1 Link2 Link3

Official Website Download Link: LINK

Repost: http://certcollection.org/forum/topic/240904-vce-exam-simulator-pro-v112-full-portable/

Get paid to share your links!

[Guide] How to delete FortiGate log entries stored in memory or local disk

2014-08-13T15:17:00.000+08:00

How to delete FortiGate log entries stored in memory or local disk.
It is assumed that memory or local disk logging is enabled on the FortiGate and other log options enabled (at Protection Profile level for example).

1- Example to delete logs from local disk for only WEB Filtering entries (*):

FGT# execute log filter device 0

FGT# execute log filter category 3

FGT# execute log delete
This will delete webfilter log
Do you want to continue? (y/n) y

2- Example to delete logs from memory for only WEB Filtering entries (*):

FGT# execute log filter device 1

FGT# execute log filter category 3

FGT# execute log delete
This will delete webfilter log
Do you want to continue? (y/n) y

3- Example to delete all local logs ( memory and local disk ) :

FGT# execute log delete-all
This will delete all local logs
Do you want to continue? (y/n) y

(*)_Note : To get the device and category list, type the filter command without argument .

FGT# execute log filter device
Available devices:
0: disk
1: memory
2: faz
4: fds

FGT# execute log filter category
Available categories:
10: application control
9: dlp
6: content
5: spam
4: ids
3: webfilter
2: virus
1: event
0: traffic

Get paid to share your links!

[Guide] How to perform a Cisco router password recovery without losing your configuration

2014-08-12T10:40:00.000+08:00

Forgot your Cisco router password? Did you know you can change them without losing your configuration? In this brief how-to, I will walk you through it. In order to perform a password recovery, you will need to reboot the router a couple of times. This means downtime, but it is a good sacrifice to make in order to get your passwords reset.

First, hook up the DB9 end of the standard light blue serial cable to your serial port. The other end of the cable should plug into the port labeled “Console” on the back of the Cisco router. If you do not have a serial port, then you'll need to go purchase a USB-to-serial adapter cable and install it on your computer.

Now that your hardware is connected, establish a serial connection with the router.

The settings you need are:
Baud: 9600
Data bits: 8
Parity: No
Stop bits: 1
Flow Control: None

On Windows, I use putty for this connection. Yes, putty can be used to make serial connections as well as telnet/ssh. Hyperterminal works great as well. On Linux, I use minicom and on FreeBSD/OpenBSD, I use cu (cu -s 9600 -l /dev/cuad0).

Reboot the router and press the Break key to interrupt the boot sequence.

For break key sequences, refer to this Cisco link: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/12818-61.html

Type confreg 0x2142. This tells the router to bypass NVRAM during bootup. In other words, your existing configuration won't be loaded. The good news is that it won't be deleted either.

Type reset to reboot the router. Answer No when prompted to run setup.

Type copy start run. This loads your startup configuration into memory.
Now, if you type a show run config, you'll see the router configuration. Also, you should notice that your router name is now in the prompt instead of the default “Router”.

To Change the enable secret - “enable secret new_password”
To Change the admin log in - “username admin_name password new_password”

Change the register back to 0x2102:
config-register 0x2102

When the router reboots it will load the old configuration with the new password.

Save the password so that it will be persistent during reboots, type copy run start

Reboot the router by typing reload at the enable prompt.

Now, keep that password in a nice safe place – in your head does not count. I keep mine saved in a safe place for future retrieval and I make sure my customers have a copy as well. Remember, passwords are nice until you forget them.

To know more: How to reset a Cisco Router
Repost from: Password Recovery from a Cisco Router

Get paid to share your links!

FortiGate DHCP Advanced Options - Lease time configuration

2014-07-02T16:14:00.002+08:00

To enable a DHCP server, go to System > Network > Interface. Edit the interface, and select Enable for the DHCP Server row. In here we can assign the address range, sub net mask, default gateway and dns server.

Now check the IP confugration settings. As shown in below figure, lease period is set to 7 days and we can only assign one DNS Server in above settings.

To change lease time and add more dns servers we have to do modify the configuration through CLI Console.
First enter below command line.
config system dhcp server
Type get to list all DHCP Servers. As shown in below figure I have 4 DHCP Servers.

Type edit <server entry number> and hit enter. And see the current DHCP Server configuration.

DHCP Server default lease-time is 604800 = 1 Week = 7 Days

So I am going to change the DHCP Lease-time to 1 Day = 86400 Seconds

Type below command set the lease-time
set lease-time 86400

To add another DNS Server (Alternative) type below command.
set dns-server2 <IP Address>

Type end to end the current session and see the DHCP configuration on the interface.

Do ipconfig /release and ipconfig /renew in computer's command prompt and verify the new IP Configuration.

Get paid to share your links!

Clear up all DHCP Addresses lease

2014-07-02T15:58:00.000+08:00

Do follow the steps:
For advanced user, you may console into Fortigate Firewall, else;
Go to System -> Dashboard -> Status -> CLI Console,

Look for CLI Console on dashboard.

By using below this command to clear up all DHCP address lease in Fortigate.

Enter execute dhcp lease-clear in CLI console, then all dhcp leased addresses will clear up.

Get paid to share your links!

To make Unmanged TrendMicro OfficeScan to managed by server

2014-06-30T09:38:00.001+08:00

1) Copy ipxfer.exe from Ofscan folder at server side to Local C:\
2) go to command prompt
3) Type ipxfer.exe -s servername -p 81
4) Wait for a while and check in OfficeScan Server Console.
5) Done

Get paid to share your links!

[FIX] Windows Server Domain Controller failed to start with Error Code: 0xc0000001

2014-06-26T17:51:00.000+08:00

Blue Screen? OMG~~
STOP: c00002e2 Directory Services could not start because of the following error: A device attached to the system is not functioning.

Error Status: 0xc0000001. Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.

If this happens in Domain controller server, which is in Windows Server 2008/2008 R2 or Windows Server 2012/2012R2

Restart the server and press F8 key, select Directory Services restore mode.
Log in with the local administrator username and password
Type: cd \windows\system32
Type: NTDSUTIL
Type: activate instance NTDS
Type: files
If you encounter an error stating that the Jet engine could not be initialized exit out of ntdsutil.

Type: cd\
Type: md backupad
Type: cd \windows\ntds
Type: copy ntds.dit c:\backupad
Type: cd \windows\system32
Type: esentutl /g c:\windows\ntds\ntds.dit
This will perform an integrity check, (the results indicate that the jet database is corrupt)

Type: esentutl /p c:\windows\ntds\ntds.dit
Agree with the prompt

Type: cd \windows\ntds
Type: move *.log c:\backupad (or just delete the log files)
This should complete the repair. To verify that the repair has worked successfully:

Type: cd \windows\system32
Type: ntdsutil
Type: activate instance ntds
Type: files (you should no longer get an error when you do this)
Type: info (file info should now appear correctly)
One final step, now sure if it’s required:

From the NTDSUTIL command prompt:
Type: Semantic Database Analysis
Type: Go

Reference:

http://www.arcserve-knowledgebase.com/index.php?View=entry&EntryID=4831

http://daddyr.blogspot.sg/2012/06/win2008r2-dc-blue-screen-on-startup.html

http://distefano.biz/blog/index.php/2013/01/22/windows-server-2008domain-controller-failed-to-start/

Get paid to share your links!

[HOW] How to Convert from Virtualbox hard drive VDI to VHD

2014-06-21T21:30:00.000+08:00

How to do if you have a .vdi file and need to put into HyperV?
Don't worry, here is a trick for you.

If you have virtualbox in your machine, then find out the tool "vboxmanage" under C:\Program Files\Oracle\VirtualBox (where virtual box is installed)
Else, go ahead to download free version virtualbox and install in machine

This tools does the job for us and very quickly:

Example: Hard drive name ITweirdo-XP.vdi
1. First we go where virtual box is installed: cd C:\Program Files\Oracle\VirtualBox by command prompt
2. Now use the tool vboxmanage with the switch clonehd:

C:\Program Files\Oracle\VirtualBox>vboxmanage clonehd "E:\Images\Virtual machines\Kiekieworld\ITweirdo-XP.vdi" z:\ITweirdo-XP.vhd --format vhd
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%

Clone hard disk created in format 'vhd'. UUID: 801c7ac4-b396-42cb-bf9a-939d78ad08f8

If you noticed my hard drive was in the E drive and my destination drive was in the Z drive, your case is going to be different.

3. Now we create a virtual machine in Hyper-V without hard drive and attach the result hard drive to the virtual machine in my case was ITweirdo-XP.vhd

This was quicker than my export to OVF and later to other format.

NOTE: Make sure destination harddrive have enough space for the new .vhd file.

[HOW] Turn on Policy-Based IPSec in Fortigate in FortiOS 5

2014-06-13T21:22:00.000+08:00

For FortiOS 5 and newer version: (Policy-Based IPSec is disable)
There is no subtype under VPN policy type.

How to turn on Policy-Based IPsec

Go to System -> Config -> Features, turn on Policy-Based IPSec VPN and click Apply

Then under policy, policy subtype will be enable when VPN policy type is selected.

Megapop configuration over ATM (Consumer router - ADSL connection)

2014-06-11T18:06:00.000+08:00

Make sure there is no record under Current ATM VC table.

Add new Channel Configuration
Default Route selection: Auto
VPI: 8
VCI: 35
Channel Mode: IPoA
Encapsulation: LLC
NAPT: Disable
802.1q: Disable
Local IP address: Customer WAN IP
Remote IP Address: Singtel WAN IP
Netmask: 255.255.255.252

Check and make sure the ATM VC has been setup properly.

Setup LAN Interface

Enable LAN DHCP

Add routing - Advance -> Routing -> Static Routes

Make sure the static route is enable

Lastly, go to maintenance, Save and reboot

Get paid to share your links!

[HOW] setup port forwarding in Thomson Router TG585 v7 / v8

2014-06-05T21:11:00.000+08:00

Step 1
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Step 2
Once logged into your router click on the "Toolbox" tab on the left.
Under "Toolbox" click "Game & Application Sharing".
Once the page is done loading click on "Create a new game or application".

Step 3
For Name, give the new rule a name.
Choose "Manual Entry of Port Maps and then click "Next".

Step 4
For 'Protocol' Choose 'TCP' or 'UDP' depending on which you need to use.
For 'Port Range' enter the ports to be forwarded.
Example: 2100 to 2200 or 3000 to 3000
Click 'Add'.
Repeat this step for all ports.
Once you have entered all the ports for this entry click 'Assign a game or application to a local network device'.

Step 5
In the "Game or Application" list, choose the name of the new rule you created.
For "Device" you can either choose the computer name to forward to, or choose "User-Defined" to manually enter a IP address.
If you choose "User-Defined" a new text box will show up, enter the local IP to forward to here.
Once you are all done click 'Add'

All done.

Reference:

http://portforward.com/english/routers/port_forwarding/Thomson-Alcatel/SpeedTouch585/Utorrent.htm

http://www.pcwintech.com/port-forwarding-thomson-tg585-v7-thomson-firmware

Allow Cisco ASA firewall show traceroutes hops

2014-05-28T20:58:00.000+08:00

To allow the ASA show in traceroutes hops you do the following

icmp unreachable rate-limit 10 burst-size 5
# Adjust ICMP unreachable replies:
# The default is rate-limit 1 burst-size 1.
# The default will result in timeouts for the ASA hop:

policy-map global_policy
class class-default
set connection decrement-ttl
# Decrement the IP TTL field for packets traversing the firewall.
# By default, the TTL is not decremented, hiding (somewhat) the firewall.

Reference:

https://learningnetwork.cisco.com/thread/63575

[HOW] Enable disk logging on a FortiGate in FortiOS 5

2014-05-20T20:48:00.000+08:00

By default disk logging has been disabled on FortiOS v5.0. One of the reasons this was done is because the flash memory on some devices are not designed for constant read/writes, so saving logs to it can degrade the disk (resulting in corrupted sectors). Having said that, we've got a few FortiGates that have been logging to disk for a few years now with no problems.

Below are the steps to re-enable disk logging:
1. Confirm your device has a log disk
2. Format the log disk
3. Enable logging

1. Confirm you device has a log disk

Firstly check that your FortiGate has the log disk available. Some units don't come with a log disk. To confirm use the get sys status command and ensure that the variable 'Log hard disk' shows 'Need format'.

fortigate # get sys status

Version: FortiGate-VM64 v5.0,build0228,130809 (GA Patch 4)

Virus-DB: 16.00560(2012-10-19 08:31)

Extended DB: 1.00000(2012-10-17 15:46)

IPS-DB: 4.00345(2013-05-23 00:39)

IPS-ETDB: 0.00000(2000-00-00 00:00)

Serial-Number: FGVMEV0000000000

Botnet DB: 1.00000(2012-05-28 22:51)

License Status: Valid

Evaluation License Expires: Fri Nov 1 06:24:58 2013

VM Resources: 1 CPU/1 allowed, 475 MB RAM/1024 MB allowed

BIOS version: 04000002

Log hard disk: Need format

Hostname: fortigate

Operation Mode: NAT

Current virtual domain: root

Max number of virtual domains: 1

Virtual domains status: 1 in NAT mode, 0 in TP mode

Virtual domain configuration: disable

FIPS-CC mode: disable

Current HA mode: standalone

Branch point: 228

Release Version Information: GA Patch 4

FortiOS x86-64: Yes

System time: Wed Oct 30 15:43:01 2013

If your FortiGate doesn't have a hard disk you'll get the following:

fortigate # get sys status

Version: FortiGate-VM64 v5.0,build0228,130809 (GA Patch 4)

Virus-DB: 16.00560(2012-10-19 08:31)

Extended DB: 1.00000(2012-10-17 15:46)

IPS-DB: 4.00345(2013-05-23 00:39)

IPS-ETDB: 0.00000(2000-00-00 00:00)

Serial-Number: FGVMEV0000000000

Botnet DB: 1.00000(2012-05-28 22:51)

License Status: Valid

Evaluation License Expires: Fri Nov 1 06:24:58 2013

VM Resources: 1 CPU/1 allowed, 475 MB RAM/1024 MB allowed

BIOS version: 04000002

Log hard disk: Not available

Hostname: fortigate

Operation Mode: NAT

Current virtual domain: root

Max number of virtual domains: 1

Virtual domains status: 1 in NAT mode, 0 in TP mode

Virtual domain configuration: disable

FIPS-CC mode: disable

Current HA mode: standalone

Branch point: 228

Release Version Information: GA Patch 4

FortiOS x86-64: Yes

System time: Wed Oct 30 15:43:01 2013

2. Format the log disk

Now enter the command execute formatlogdisk, then press y to confirm. This will format the disk then REBOOT the firewall.

fortigate # execute formatlogdisk

Log disk is /dev/sdb1.

Formatting this storage will erase all data on it, including

logs, quarantine files;

and require the unit to reboot.

Do you want to continue? (y/n)y

3. Enable logging

When the device is back up login to the web GUI and navigate to Log & Report > Log Config > Log Settings. You should now see the 'Disk' option. Select this (and 'Enable local reports' if you want to run reports locally) then click apply. Ensure that 'Display logs from' says Disk.

If you don't have this option via the web GUI you can enable it via the CLI with the following commands:

fortigate # config log disk setting
fortigate (setting) # set status enable
fortigate (setting) # end

Reference:

http://www.lebleuet.net/comment-activer-le-logging-sur-un-fortinet-avec-le-firmware-5-x?lang=en

http://alstechcorner.blogspot.sg/2013/10/how-to-enable-disk-logging-on-fortigate.html

Avanset VCE Exam Simulator Pro v1.0.2 (Cracked)

2014-05-20T17:30:00.000+08:00

Hi Everyone,

Looking for newer Visual CertExam Suite??

Now they changed to Avanset VCE Exam Simulator...
Version 1.0.2 (latest)

You may download from these few link

LINK1

LINK2
LINK3

Official Website Download Link: LINK

Enable BBI in BNT Switch (Blade OS/Networking OS)

2014-05-13T20:44:00.000+08:00

How to enable BBI in BNT Switch in order to change administrator password.

By default: BBI is disable, Telnet is disable, only able access by SSH

Change of Administrator's password
Login by SSH to switch IP address with correct login credential.

Key in as below:
cfg/sys/access/user/admpw,
enter old and new password
REMEMBER apply and save

How to back to upper menu?
Key in "up" without quote.

Enable Telnet

Key in as below:
cfg/sys/access/tnet, key in "e" without quote
REMEMBER apply and save

Changing Product Key on Window8 and Window Server 2012

2014-04-10T09:42:00.003+08:00

To change the product key without first activating Windows, use one of the following methods:

Method 1

Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.
In the search box, type Slui 3.
Tap or click the Slui 3 icon.
Type your product key in the Windows Activation window, and then click Activate.

Method 2

Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.
Type Command Prompt in the Search box.
Right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
Run the following command at the elevated command prompt:
slmgr.vbs /ipk <Your product key>

Reference: http://support.microsoft.com/kb/2750773

MSServer 2008R2 : Window ServerBackup - wbengine.exe crashed

2014-03-06T11:40:00.001+08:00

Faulting application name: wbengine.exe, version: 6.1.7601.17514, time stamp: 0x4ce79951
Faulting module name: wbengine.exe, version: 6.1.7601.17514, time stamp: 0x4ce79951
Exception code: 0xc0000005
Fault offset: 0x000000000011341b
Faulting process id: 0x15ec
Faulting application start time: 0x01cf382bd173e7ab
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\system32\wbengine.exe
Report Id: b7f8df20-a41f-11e3-b3bc-5cf3fc56648c

run the command>Wbadmin delete catalog

Remember take note of the backup schedule details before pressY

MS Office365: Bulk Change Password

2014-02-19T15:19:00.003+08:00

$LiveCred = Get-Credential

$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell/ -Credential $LiveCred -Authentication Basic -AllowRedirection

Import-PSSession $Session

Connect-msolservice

Get-msoluser | set-msoluserpassword -newpassword Pass1234 -forcechangepassword 0

change all password to Pass1234, does not require to change at next logon

$LiveCred = Get-Credential

$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell/ -Credential $LiveCred -Authentication Basic -AllowRedirection

Import-PSSession $Session

Connect-msolservice

Import-Csv c:\screen\password.csv|%{Set-MsolUserPassword -userPrincipalName $_.UserPrincipalName -NewPassword Pass1234 -ForceChangePassword $false}

CSV file one column 1 field

change all password to Pass1234 from a list of specify user, does not require to change at next logon

Visual CertExam Suite 3.4.2 with Crack (Full Download)

2014-01-24T15:29:00.001+08:00

Hey guys,

Looking for latest Visual CertExam Suite 3.4.2

Here is the download link: LINK1 LINK2

Official Website Download Link: Link

Reference: Link1 Link2

MS Office365:Set mailbox size limits for a single user

2014-01-20T11:23:00.001+08:00

$UserCredential = Get-Credential

$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -Credential $UserCredential -Authentication Basic -AllowRedirection

Import-PSSession $Session

Set-Mailbox <userid> -ProhibitSendQuota 4.8GB -ProhibitSendReceiveQuota 5GB -IssueWarningQuota 4.7GB

Remove-PSSession $Session

[Solution] "The User Profile Service failed the logon” error message

2013-03-12T12:32:00.000+08:00

Before proceed to solution,
PLEASE login to administrator account

Solution:
1) Click Start, type regedit in Search box, then hit ENTER
2) In Registry Editor, locate ProfileList by following registry path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
3) In the navigation pane, find the one that starts with S-1-5..... and ends with .BAK
4) Click each S-1-5 folder, locate the ProfileImagePath entry in the details pane, and then double-click to make sure that this is the user account profile that has the error.

5) Right-click the folder without .bak, and then click Rename. Type .ba

6) Right-click the folder that is named .bak, and then click Rename. Remove .bak at the end of the folder name.

7) Right-click the folder that is named .ba, and then click Rename. Change the .ba to .bak at the end of the folder name

8) Double-click the folder without .bak in the details pane, double-click RefCount, type 0, and then click OK.

9) Click the folder without .bak, in the details pane, double-click State, type 0, and then click OK.

10) Close Registry Editor and restart computer. Then login to your account.

Hope it can solve your issue. =)

Reference:
http://support.microsoft.com/kb/947215
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/i-receive-error-message-the-user-profile-service/38844b82-a2c1-4fa2-9802-a5318d6f7831
http://www.sevenforums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to create rules in Gmail??

2012-12-10T10:53:00.000+08:00

How to create rules/filters in Gmail as per MS Outlook does?

As Gmail's filters allow you to manage the flow of incoming messages. Using filters, you can automatically label, archive, delete, star, or forward your mail, even keep it out of Spam.

To create a filter

Click the down arrow in your search box as picture shown above. A window that allows you to specify your search criteria will appear.
Enter your search criteria. If you want to check that your search worked correctly, click the search button.
Click "Create filter with this search" (Grey out sentence in picture) at the bottom of the search window. If you need to verify the search results, you can click the x to collapse the filter options. Clicking the down arrow again will bring the window back with the same search criteria you entered.
Choose the action(s) you want the filter to take.
To keep organized, many people like to have incoming messages automatically labeled and removed from their inbox until they can look at them later at a more convenient time. If you want to do this, make sure to select Skip the Inbox (Archive it) and Apply the label: when you create your filter.
Click the Create filter button.

Also, you may also use a particular message to create a filter

Select the message in your message list.
Click the More button, then Filter messages like these.
Enter your filter criteria in the appropriate field(s).

Besides that, you also can check all your filters list and setting in Gmail Gear Icon.

Reference:
http://support.google.com/mail/bin/answer.py?hl=en&answer=2802754&rd=1

Script to make all folder unhide

2012-12-05T10:22:00.000+08:00

If you face a problem that all your folder in window directory was missing, you may try to un-check few options in folder option menu.

By default of Windows, the ribbon will be at #2-1, "Don't show hidden files, folders, or drives.
To view hidden file, change the ribbon to #2-2, show hidden files, folders, and drives
However, sometimes you need to un-check #2-3, hide protected operating system files (recommended) while the system has been infected by virus.

#3 is un-hide all file extension for all file types if there was un-check.

Then you may see some kind like this as below picture. All folder are hidden and grey out.

How to make all folder unhidden in one-shot instead to do it one-by-one folder?
Here is the command prompt script to let you unhide all folder in one-click.

Code:
@echo off
Echo This script will unhide all files in the current folder and all subfolders. 
Echo If there are a lot of files, it may take some time to complete.
Attrib -H /S /D
echo Unhide Complete
pause

Copy all those text into notepad.exe and save it as *.bat file extension. Then put the file *.bat into those folder or drives that infected and execute it.
Then you will see all your folder come back as per normal and you may check back the folder options as windows default.

Reference:

http://forums.techguy.org/windows-7/1029473-making-all-hidden-files-unhidden.html

[Cisco] Setup ADSL connection

2012-11-25T09:51:00.000+08:00

Here is the example for ADSL setup:

no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname ******TYPE YOUR HOSTNAME HERE******
!
enable secret *******************TYPE YOUR SECRET PASSWORD*******************
username <username> password <password>
no aaa new-model
ip subnet-zero
no ip source-route
no ip domain lookup
!
!
ip dhcp excluded-address <192.168.0.1> <192.168.0.29>
ip dhcp excluded-address <192.168.0.241> <192.168.0.255>
!
ip dhcp pool dhcppool
import all
network <192.168.0.0> <255.255.255.0>
dns-server **** TYPE DNS SERVER IP ADDRESS (Follow by spacebar)****
default-router <192.168.0.1>
!
no ftp-server write-enable
!
interface vlan1
 description <description>
 ip address <192.168.0.1> <255.255.255.0>
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1350
 no ip mroute-cache
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
 pvc 0/38 
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
 dsl operating-mode auto
!
interface Dialer0
 description <description>
 ip address negotiated
 ip mtu 1492
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 no ip route-cache
 no ip mroute-cache
 dialer pool 1
 dialer-group 1
 ppp authentication chap callin
 ppp chap hostname ***** adsl username *****
 ppp chap password ***** adsl password *****
!
ip nat inside source list 100 interface Dialer0 overload
ip local pool dhcppool 192.168.0.101 192.168.0.105
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
access-list 1 permit <external ip address to access telnet from> <mask>
access-list 100 permit ip <192.168.0.0> <0.0.0.255> any
!
********** SAMPLE PORT FORWARDING **********
ip nat inside source static tcp 192.168.0.31 3389 interface Dialer0 3389
ip nat inside source static udp 192.168.0.100 8503 interface Dialer0 8503
!
!
line con 0
 password *****TYPE YOUR CONSOLE PASSWORD*****
 login
 no modem enable
 stopbits 1
 transport output all
line aux 0
 stopbits 1
 transport output all
line vty 0 4
 access-class 1 in
 exec-timeout 0 0
 password *****TYPE YOUR TELNET PASSWORD*****
 login
 transport input all
 transport output all
!
scheduler max-task-time 5000
!
end

Refenrence:
http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/pppoanat.html
http://www.certforums.com/forums/routing-switching/19952-cisco-877w-adsl-setup.html
http://exewiki.exetel.com.au/index.php?title=Cisco_-_Sample_Config_for_Cisco_877

How to segregate the mail function in Blackberry and Outlook

2012-11-20T09:09:00.000+08:00

Do you want to leave a copy of email in your blackberry while you are deleting email from your MS Outlook?
How about the other way round, deleted blackberry handheld email, and leave a copy in MS Outlook?

Here, Blackberry handheld itself having a good feature called "Email Reconciliation" to segregate the email function.

Following step is to set it up:
1) Click on then select options as snapshot shown below.

2) Next, please choose "Email Reconciliation" in list

3) Here is 3 setting you need to do.
- Delete on: Choose "Handheld" mean only will be deleted in handheld while you doing delete email in your handheld
- Wireless Reconcile: Just Uncheck the box.
- On Conflicts: Choose "Handheld Wins" as handheld will always the winner when there is any conflict occur between 3rd party mail software and blackberry handheld.

Then you can try to send a email into your mailbox, and you will be receiving email in both (Your handheld and 3rd Mail software), you may try to delete from one of them now.
Therefore you will see the result there. =)