JENIUS = 1% IDE & 99% HARD WORK

Mimpi basah maksudnya apa ya ??

noreply@blogger.com (Faozan) — Fri, 18 Jan 2008 03:45:00 +0000

Mimpi bercinta dengan mantan kekasih, berhubungan
seksual dengan wanita yang tak tampak wajahnya, sampai
mimpi tak bisa ereksi, semua itu ada artinya. Yuk kita
intip apa arti di balik ‘mimpi basah’ tersebut.

Mimpi basah pastinya sudah tak asing lagi di kalangan
pria yang sudah lewat masa puber. Mimpi yang
menandakan kedewasaan itu nggak hanya dominasi remaja,
tapi juga masih banyak dialami pria dewasa single
lainnya.

Ternyata mimpi tersebut tak hanya sekedar berarti
melepaskan hasrat seksual. Di balik itu ada makna
psikologis lain yang wajib diperhatikan.

Mimpi adalah salah satu cara otak untuk mengeluarkan
ide, hasrat, atau ketakutan yang terlalu abstrak.
Tujuan dari mimpi adalah untuk menyalurkan fantasi,
ide, atau hasrat tadi secara mental sehingga anda
tidak terlalu ‘terbebani’ dengan hal-hal tadi.
Prinsipnya sama seperti mengosongkan tempat sampah.

Seperti dilansir askmen, Selasa (20/9/2005) ada
beberapa simbol-simbol mimpi basah yang menggambarkan
arti-arti tertentu.

1. Bercinta dengan wanita tanpa wajah
Banyak pria seringkali mimpi berhubungan seksual
dengan wanita yang wajahnya tak dapat diingat ataupun
dikenali. Tapi seringkali anda ingat akan sifat dan
berbagai kelebihan dirinya yang memikat.

Mimpi tersebut berarti di bawah alam sadar anda sangat
menginginkan seks yang tanpa konsekuensi. Anda ingin
melakukan hubungan seks dengan seorang wanita tanpa
harus memperhatikan emosi atau identitasnya.

Arti lain dari mimpi ini adalah untuk koreksi diri.
Pasangan yang tanpa muka itu secara tak disadari
adalah harapan anda terhadap diri sendiri. Cara yang
tepat untuk merespon mimpi tersebut adalah dengan
mengingat kelebihan pasangan anda di mimpi tadi dan
coba untuk menerapkan kelebihannya pada diri anda.

2. Mantan pacar datang lagi
Buat yang masih jomblo atau malah sudah punya pacar,
tak jarang mantan pacar kembali hadir di mimpi basah.
Jangan bingung dulu, ini bukan berarti anda sedang
merindukannya, tapi justru anda ingin menyingkirkan
dia dari kehidupan.

Mungkin saja saat itu sedang ada ‘pendatang baru’. Nah
hadirnya mimpi itu bisa saja menjadi simbol persiapan
anda menuju hubungan baru. Dengan memimpikan mantan,
pikiran anda sedang berusaha mengakhiri masa lalu dan
membuka lembaran baru. So, nggak usah berlarut-larut
memikirkannya.

3. Pasangan tiba-tiba menghilang
Upss, sedang asyik bercinta tiba-tiba pasangan
menghilang begitu saja. Anda pernah mengalami mimpi
basah demikian?

Buat yang pernah mimpi seperti ini sebaiknya
introspeksi diri. Di balik senyum ceria, apakah ada
perasaan tidak nyaman dan frustasi dengan kekasih.
Sebab, mimpi ini bisa berarti anda sedang mengalami
krisis percaya diri. Tentu saja dengan pasangan anda.

Jauh di dalam hati anda merasa ditinggalkan dan
frustasi dengan kekasih yang tak bisa diharapkan.
Daripada resah tak berakhir, sebaiknya bicara terbuka
dengan pasangan. Dengan begitu, perasaan frustasi yang
anda alami bisa berganti menjadi percaya diri.

4. Bercinta dengan rekan kerja
Tanpa diduga tadi malam anda bermimpi dengan rekan
kerja anda yang cantik. Hmmm, senang dan khawatir pun
bercampur. Takut salah tingkah di depannya.

Tak banyak bedanya apakah anda bermimpi dengan staff
kantor yang cantik atau dengan senior kerja yang sudah
berumur. Semuanya menandakan hal yang sama yaitu
hubungan anda dengan mereka.

Mimpi dengan rekan sekerja bisa jadi semacam simbol
yang menggambarkan hubungan anda dengan orang
tersebut. Bisa berarti anda menikmati ikatan
profesional yang anda jalin dengan rekan kerja anda
tadi. Mimpi itu juga bisa berarti anda sudah merasa
nyaman dengan orang tersebut.

5. Mimpi bercinta di depan umum

Pernah bermimpi melakukan hubungan seks di depan umum? Mimpi seperti ini memiliki beberapa arti.

Pertama bisa saja ketika itu anda sedang merasa resah atau khawatir akan aktivitas seksual anda. Misalnya, anda bermimpi semacam ini setelah anda berusaha mengajak pasangan melakukan hubungan seksual yang aneh. Mimpi tersebut adalah penyaluran rasa bersalah anda.

Mimpi ini juga bisa berarti anda sedang tidak menjadi diri sendiri. Pakaian adalah simbol kepribadian anda dan tak berpakaian di depan umum bisa jadi salah satu simbol anda takut pribadi asli anda terungkap.

6. Bermimpi dengan sesama jenis

Pastinya tak sedikit pria yang pernah mengalami mimpi serupa. Penjelasan paling umum adalah anda ingin berpindah jalur. Eits, tapi bukan secara orientasi seksual. Ketika sedang melakukan aktivitas seks, anda ingin pasangan bersikap lebih ‘laki-laki’ sementara anda memainkan peran sebagai ‘perempuan’.

Beberapa psikolog menyatakan, aktivitas seks sesama jenis dalam mimpi berarti anda menginginkan pasangan anda bersikap lebih laki-laki. Contohnya anda ingin si dia lebih logis, beralasan, dan dominan.

Tapi jangan khawatir, jika mimpi dengan sesama jenis membuat anda sedih atau kesal, berarti kemungkinan anda bukan seorang homoseksual.

7. Mimpi mengalami disfungsi ereksi

Gangguan ereksi walaupun dalam mimpi pasti membuat anda resah. Lagi-lagi, arti mimpi ini juga bisa bermacam-macam. Bisa saja ketika itu anda sedang merasa lemah dan tak bergairah dalam hidup. Jika ketika bermimpi ini anda sedang dalam proses mencari kerja atau tengah mengincar kenaikan jabatan, mungkin anda frustasi dengan keadaan tersebut. So, coba cari penyebab yang secara disadari atau tidak membuat anda stress dan merasa tak berdaya.

dikutip dari http://www.mail-archive.com/ftikumt2001@yahoogroups.com/msg00007.html

Mengapa orang china menguasai perekonomian

noreply@blogger.com (Faozan) — Mon, 24 Dec 2007 09:33:00 +0000

Ternyata saya baru paham,, kenapa orang china memiliki tingkat perekonomian lebih baik dari kita..Dari berbagai macam perbedaan yang mendasar antara kebudayaan, pemikiran dan status keduniawian yang terlihat kontras..saat duduk santai dengan salah satu teman kantor.. terlintas pemikiran secara logika, kenapa kok orang china di Indonesia terlihat memiliki kehidupan dunia yang di atas rata-rata ( wuihh sambil mikir dengan serius..:D sampai memejamkan mata) sedangkan kebanyakan dari tuan rumah sendiri berada di bawah rata-rata…. Perbedaan kebudayaan dan pola pikir memang tidak bisa di pungkiri yang menjadi salah satu penyebabnya.. ternyata kepercayaan orang china bahwa hartanya akan di kubur bersamaan dengan tubuhnya, untuk menjadi bekal nanti pada saat akan renkarnasi ( hidup kembali ke alam dunia ), Sedangkan kepercayaan yang berkembang di masyarakat sekitar kita kalau kita meninggal tidak akan membawa harta benda so buat apa kita memiliki dan mengumpulkan harta benda, dari kepercayaan inilah mereka akan terus termotivasi untuk memperkuat perekonomiannya. Sedangkan dari kepercayaan masyarakat kita tersebut akan menghilangkan motivasi untuk berusaha lebih keras memperkuat perekonomian sendiri.. di sinilah letak perbedaan yang mendasar kenapa orang china bisa menguasai perekonomian.hehehehe :D..

Pepatah barat mengatakan “Apa yang anda pikirkan adalah apa yang anda dapatkan”.. so kalau mau menjadi lebih kaya kita harus merubah pemikiran dan berpikir lain dari biasanya..

Magic Moment

noreply@blogger.com (Faozan) — Wed, 19 Dec 2007 06:45:00 +0000

Hmmm… siapa yang gak tahu tentang magic moment ya.. kata orang magic moment sangat membuat orang terinspirasi untuk melakukan action terhadap suatu rencana..menurut orang magic momentlah start awal kesuksesan untuk menjalankan sesuatu hal. Terlebih dari apa yang telah d perbuat dan apa yang akan di dapatkan dari hasil yang dia tanam.
Yang menjadi pertanyaan seperti apa sih magic moment itu??
Kapan datang nya magic moment kedalam diri seseorang ??
Bagaimana magic moment itu datang ??
Hehehe.. saya butuh masukkan banget nih dari blogger semua, siapa tahu diantara kita pernah mendapatkan magic moment yang bisa merubah kehidupan blogger… di tunggu comment nya ya….:)

Sekilas Tentang La Tahzan

noreply@blogger.com (Faozan) — Wed, 19 Dec 2007 06:24:00 +0000

La Tahzan ‘jangan bersedih” siapa yang gk kenal nih buku, ane kira sih banyak orang terinspirasi di karenakan buku ini, kalau menurut ajaran The Secret kata-kata “jangan bersedih” sama arti nya dengan bersedih lah dengan sedih yang banyak..why…??? karena alam tidak mengerti makna jangan dia, alam akan menerjemahkan dengan sedih.. kalau boleh usul sih kenapa tidak di ganti aja dengan kata La Tahzan “Berbahagialah” hihihihi.. kan sesuai tuh dengan isi buku yang akan di sampaikan..

Pertanyaannya kedua yang ada di benak saya… kenapa buku La Tahzan ini banyak di minati di indonesia… kalau saya boleh komentar sih, itu mungkin di akibatkan oleh kondisi moral bangsa indonesia yang berlum stabil, selalu berpikir negatif tentang segala hal.. coz kebahagiaan akan datang ke diri seseorang kalau orang itu selalu berpikir positif terhadap semua lingkungan..

150 Tips dan Trik Ampuh untuk windows

noreply@blogger.com (Faozan) — Tue, 16 Oct 2007 06:23:00 +0000

Setelah menginstalasi Windows dan aplikasi-aplikasi lain yang
dibutuhkan ke dalam komputer, ada beberapa hal yang seharusnya Anda lakukan. Di
antaranya adalah melakukan beberapa hal untuk mempercepat serta
mempermudah kinerja komputer. Misalnya, mengatur agar komputer bisa restart
lebih cepat, atau memunculkan menu tersembunyi, menggunakan shortcut
untuk akses lebih cepat dan lain sebagainya.

Semua hal di atas adalah sebagian kecil dari tip dan trik dasar Windows
yang kami sampaikan berikut ini. Semua tip dan trik di sini kami
padukan menjadi 150 langkah mudah dan aman untuk dilakukan. 150 tip dan trik,
termasuk beberapa panduan langkah demi langkah yang mudah berikut ini,
akan menjadikan komputer Anda lebih nyaman bekerja. Tentu saja,
akhirnya, produktivitas Anda di depan komputer kian berkembang.

Sebuah komputer yang nyaman saja belum cukup tanpa dibarengi
peningkatan sisi keamanan. Hal ini penting, sebab koneksi ke jaringan, Internet
maupun ke komputer lain, sedikit banyak pasti berisiko. Mulai dari
penyebaran virus hingga pengambilan data kita oleh orang yang tidak berhak.
Untuk itu, kami sertakan pula beberapa tip dasar untuk memperbaiki
keamanan pada Windows.

Beberapa tip dan trik maupun panduan langkah demi langkah dalam tulisan
ini menggunakan bantuan program tertentu yang bisa di-download dari
beberapa situs di Internet. Namun untuk memudahkan Anda, seperti biasa
semua program yang disebutkan dalam tulisan berikut ini disertakan dalam
CD PC Media. Tentu saja, semua program sudah diuji di labs PC Media.

Instalasi program yang ada dalam tulisan ini kebanyakan berasal dari
situs resmi Microsoft. Sehingga kecil kemungkinannya program-program ini
menyebabkan error di PC. Jadi jangan ragu, ikuti terus tip dan trik
dasar pada Windows yang jarang terungkap!

Instalasi Windows yang Mudah dan Menyenangkan

01. Back-up dahulu registry sebelum diedit. Caranya, klik Start|Run,
ketik regedit. Setelah muncul window registry, pilih menu File|Export.
Pada bagian Export range, pilih All dan tentukan nama file, akhiri dengan
klik tombol Save.

02. Banyak program yang sebenarnya terinstalasi dalam Windows, namun
tidak aktif. Untuk mengaktifkannya, masuk ke Control Panel|Add/Remove
Windows Component dan beri tanda centang pada program yang belum aktif.

03. Sebelum menginstalasi program baru atau melakukan perubahan setting
Windows secara keseluruhan, lebih baik buat Restore Point secara manual
dahulu. Caranya, Klik Start|All Programs|Accessories|System Tool|System
Restore dan klik Create a restore point.

04. Jika Anda memutuskan untuk menginstalasi Windows Update yang
sebelumnya sudah didecline, masuk ke Control Panel|System, pilih tab
Automatic Updates dan klik Restore Declined Updates.

05. Untuk mengatur Windows update berjalan sesuai dengan kebutuhan
Anda, atur dulu Windows Update. Caranya, buka System di Control Panel dan
klik tab Automatic Updates. Atur enable atau disable option Keep my
computer up to date.

06. Bila Anda tidak memiliki CD bootable, jangan khawatir. Microsoft
sudah menyediakan
tool gratis untuk membuat disket booting di
http://support.microsoft.com/?kbid=310994.

07. Jika saat instalasi Windows tiba-tiba terhenti, matikan komputer
dan lepas card tambahan. Misalnya sound card. Instal ulang dan pasang
kembali card setelah instalasi selesai.

08. Untuk menambahkan System Administration Tools ada Start Menu, klik
kanan Start|Properties. Masuk dalam tab Start Menu dan klik Customize
kemudian masuk dalam tab Advanced. Geser ke bawah dan beri tanda centang
pada option Display on the All Programs and the Start Menu.

09. Untuk menginstal Back up Utility pada Windows XP Home Edition
carilah file ntbackup.msi di direktori\valudeadd\msft\ntbackup\ di CD
instalasi Windows XP. Jalankan file tersebut dan ikuti langkahlangkahnya.

10. Windows XP secara otomatis akan me-highlight setiap program baru
yang ter-install. Cara menghilangkannya, klik kanan Start|Properties.
Masuk ke tab Start Menu|Customize, kemudian klik tab Advanced dan
hilangkan tanda centang pada opsi Highlight newly installed program.

11. Untuk tampilan film atau game terbaik pada komputer, pastikan bahwa
DirextX terbaru sudah terinstalasi dengan baik. Lihat versi terbarunya
di www.microsoft.com/windows/directx.

12. Ada kalanya hardware yang akan dipasang belum support
Plug-and-Play. Untuk itu, gunakan Add Hardware Wizard yang ada di Control
Panel|System|Hardware untuk mendeteksinya.

–> TOP TIPS ! Mempercepat Kerja Komputer

13. Sebenarnya hanya dibutuhkan waktu tidak lebih dari 2 menit saja
untuk masuk ke Windows sejak komputer dihidupkan. Namun, kadang terasa
sangat lama. Untuk mempercepat loading Windows, ada beberapa hal yang bisa
dilakukan. Misalnya, mengurangi icon di desktop serta tidak menggunakan
wallpaper yang memakan banyak memory. Ganti wallpaper dengan background
berwarna, serta gunakan Desktop Cleanup Wizard yang ada bisa ditemui
dengan klik kanan pada desktop untuk membersihkan
icon. Jangan lupa juga, jalankan defrag secara berkala.

Jika Anda sering menambah atau mengurangi program di komputer,
bersihkan registry secara rutin. Gunakan software bantu seperti Registry
Mechanic dari situs www.winguides.com. Sayangnya, versi trial program ini
hanya bisa digunakan memperbaiki sebanyak 6 sections saja.

Langkah lain yang perlu dilakukan adalah me-remove program yang di-load
secara otomatis saat memulai Windows. Tentu saja, hanya program-program
yang tidak dibutuhkan. Caranya, dengan menghapus semua isi folder
startup dan membuka msconfig melalui Start|Run.

14. Gunakan fitur File and Transfer Setting Wizard untuk memindahkan
file dan setting ke komputer baru. Caranya, klik
Start|AllPrograms|Accessories|System Tools, kemudian jalankan File and Transfer Setting Wizard.

15. Gunakan pengecualian pada security setting di Internet Explorer,
agar proses update melalui halaman Windows Update berjalan lancar.
Caranya, buka Internet Option di menu Tools pada Internet Explorer. Klik tab
Security, pilih Trusted Site dan klik tombol Sites. Isikan nama situs
Windows Update, hilangkan tanda centang pada option Require server
verification… dan klik OK.

16. Jika Anda kehilangan serial number Windows XP, gunakan freeware
Magical Jelly Bean Keyfinder dari
http://www.magicaljellybean.com/keyfinder.shtml.

17. Jika nama yang teregister dalam Windows XP Anda tidak sesuai,
perbaiki melalui registry. Caranya, buka registry dan pilih MY Computer.
Klik menu Edit|Find dan ketik RegOwner. Jika sudah ditemukan, klik kanan,
pilih Modify dan isikan nama yang sesuai. Perubahan ini bisa juga
dilakukan di key RegCompany.

Peningkatan Performa Internet dan Jaringan

18. Untuk men-share sebuah folder di komputer Anda ke jaringan, klik
kanan folder tersebut dan pilih Properties. Klik tab Sharing dan enable
option Share this folder on the network. Beri nama dan klik OK.

19. Buat sebuah icon My Network Places di desktop dengan mengklik kanan
area kosong di dekstop dan klik Properties. Pilih tab Desktop|Customize
Desktop. Kemudian buka tab General dan enable option My Network Places.

20. Ada cara mudah mengirim pesan ke komputer lain di jaringan, yakni
menggunakan Console Message. Buka Control
Panel|AdministrativeTools|Computer Management|Action|All Task|Send Console Message. Ketik teks yang
hendak dikirim, tambahkan nama komputer yang hendak dituju dan klik
Send.

21. Untuk mengatur Internet Connection Firewall (ICF), buka Network
Connection di Control Panel, klik kanan koneksi yang ada dan klik
Properties. Buka tab Advanced dan enable option Protect my computer and network
by limitting or preventing access to this computer from Internet.

22. Atur Internet Connection Firewall (ICF) untuk setiap koneksi yang
ada. Baik dial-up maupun broadband. Jika komputer Anda merupakan bagian
dari jaringan yang terhubung ke Internet, pasang ICF hanya di komputer
server.

23. Untuk mengetahui alamat IP Anda, masuk dalam DOS dengan mengetikkan
command di Run. Kemudian ketikkan ipconfig /all.

24. Jika Anda menerima pesan dari Internet melalui Messenger, segera
matikan. Caranya, masuk ke Contol Panel|Administrative Tools|Services,
dan klik ganda Messenger kemudian Stop. Untuk mencegah supaya tidak
terulang, atur supaya Messenger menjadi Disabled di bagian Startup.

25. Matikan Windows Messenger dengan melalui regedit. Buka
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft, kemudian pilih menu Edit|New|Key,
dan beri nama Messenger. Kemudian buat key lagi dengan cara ini di dalam
direktori Messenger dengan nama key-nya Client. Setelah itu, klik menu
Edit|New|DWORD Value, dan beri nama Prevent-Run. Klik kanan value
PreventRun, pilih Modify, isi angka 1 pada Value data, dan klik OK.

26. Untuk mengetahui informasi mengenai koneksi di komputer Anda, klik
Start|All Programs|Accessories|System Tools|System Information. Pilih
menu Tools|Net Diagnostics. Pada window yang terbuka kemudian pilih
option Scan your system. Tunggu hingga proses selesai untuk melihat
hasilnya.

27. Lindungi privasi dengan mencegah aplikasi Windows Media Player
mengirim data mengenai komputer dan kebiasaan Anda menggunakan komputer
melalui Internet ke alamat-alamat tertentu. Caranya mudah, Pada Windows
Media Player, pilih menu Tools|Option. Buka tab Player dan disable option
Aloww internet sites to uniquely your player.

28. Untuk mengunci komputer yang berada dalam sebuah network domain,
tekan tombol Ctrl + Alt + Del bersamaan dan klik option Lock Computer.
Untuk membuka kembali, tekan tombol Ctrl + Alt + Deldan masukkan
password. Konfigurasi Windows yang Mudah dan Cepat.

29. Untuk men-disable fitur autorun, klik kanan pada icon drive CD,
pilih Properties dan masuk dalam tab AutoPlay. Kemudian disable autoplay
untuk setiap jenis file yang tertera pada daftar.

30. Gunakan program Microsoft Clear Type Tuning Control dari
http://www.microsoft.com/typography/cleartype/ untuk mengatur Clear
Type pada komputer.

31. Untuk melihat system file yang secara default di-hidden oleh
Windows XP, pilih tab View dalam menu Tool|Folder Option dalam Windows
Explorer. Enable Display the content of system folder.

32. Untuk meletakkan icon volume control di taskbar, masuk dalam
Control Panel|Sound and Audio dan klik tab Volume. Enable Place volume
control in the Taskbar dan klik OK.

33. Atur tombol Power di keyboard melalui Control Panel|Power Option di
tab Advanced. Tentukan pengaturan tombol Power ini dengan memilih
option yang tersedia.

34. Atur supaya Windows membersihkan Pagefile saat shut down demi
keamanan. Caranya, buka registry dan masuk dalam direktori
HKEY_LOCALMACHINE\SYSTEM\CurrentControlSet\Control|Session Manager. Edit value pada key
Clear-PageFileAtShutdown menjadi 1. Konsekuensinya, proses shut down
akan berlangsung sedikit lebih lama.

35. Atur supaya Windows menampilkan ekstensi setiap file. Caranya, di
Windows Explorer, pilih menu Tool|Folder Option dan tab View. Hilangkan
tanda centang di option Hide file extentions for known file types.

36. Menghapus Komponen yang Terinstal
Banyak komponen Windows yang tidak muncul di Add/Remove Windows
Component sehingga tidak bisa di-uninstall.

a. Buka Notepad dan pilih menu File|Open. Arahkan ke folder
Windows\inf. Isi nama file sysoc.inf. Klik Open untuk membuka file ini.
b. Pilih menu Edit|Replace. Ketik Hide pada kolom Find, namun kosongkan
kolom Replace With, klik Replace All. Tujuannya untuk menghapus semua
kata Hide dalam file ini. Setelah selesai, tutup dan simpan file.
c. Buka Control Panel dan pilih Add/Remove Programs. Kemudian pilih
Add/Remove Windows Component, pada windows yang keluar kemudian akan
tampak beberapa komponen yang sebelumnya tersembunyi.

37. Ubah gambar pada welcome screen dengan cara masuk ke User Account
di Control Panel. Buka account Anda dan klik Change my picture. Tentukan
gambar pilihan Anda dengan mengklik Browse untuk gambar di harddisk
atau memilih di antara gambar yang sudah tersedia.

38. Jika lebih menyukai tampilan Start Menu versi lama, Anda bisa
mengubahnya dengan mengklik kanan tombol Start, pilih Properties. Pilih
Classic Start Menu dan klik Customize untuk mengatur isinya.

39. Untuk menyempurnakan tampilan klasik pada Start Menu, klik kanan
desktop dan pilih Properties. Buka tab Themes, dan pilih Windows Classic
dari Theme list.

40. Tambahkan image pada sebuah folder, sehingga image tersebut yang
akan tampak saat Windows Explorer dalam tampilan thumbnails. Caranya,
klik kanan folder yang hendak diolah, pilih Properties. Klik tab Customize
dan klik Choose Picture. Pilih sebuah gambar dan klik Open|OK.

41. Sesuaikan kapasitas Recycle Bin dengan mengklik kanan icon Recycle
Bin dan memilih
Properties. Isi kapasitas yang Anda inginkan dan klik OK.

42. Pada saat View di-set Details di Windows Explorer, klik kanan
header salah satu kolom untukmengatur kolom apa saja yang ditampilkan. Klik
More bila perlu mengatur setting lainnya.

43. Untuk menambahkan program yang paling sering Anda gunakan dalam
Quick Launch, drag icon program tersebut dalam Quick Launch.

44. Tambahkan address bar pada taskbar, sehingga mempercepat akses ke
sebuah alamat di Internet. Caranya, klik kanan taskbar, pilih
Toolbar|Address. Klik ganda untuk membuka dan menutupnya.

45. Jadikan tampilan Windows Explorer seperti tampilan pada window My
Computer. Caranya, klik kanan icon Window Explorer dan pilih Properties.
Pada Target area, setelah %SystemRoot%\explorer.exe tambahkan /n, /e,
/select, C:\ dan klik OK.

46. Untuk menambahkan sebuah shortcut program di baris paling atas
Start Menu, klik kanan icon-nya di Start Menu kemudian klik Pin to Start
Menu.

47. Supaya sebuah drive atau folder dapat masuk dalam menu Send To,
drag shortcut-nya ke folder \Documen Anda Setting\\SendTo.

48. Mencari folder SendTo? Klik saja Start|Run dan ketik SendTo
kemudian klik OK.

49. Untuk mengosongkan daftar dokumen dalam folder My Recent Document
di Start Menu, klik kanan Start, pilih Properties. Klik Customize dan
buka tab Advanced kemudian klik tombol Clear list. Supaya tidak ada lagi
yang muncul di My Recent Documents, disable option List my most
recently opened documents.

50. Fast User Switching
Dengan Fast User Switching, seorang user tidak perlu logoff sementara
user lain login.

a. Untuk meng-enable Fast User Switching, masuk dalam Control Panel dan
pilih User Accounts. Klik option Change the way user log on or off, dan
enable Use Fast User Switching.
b. Supaya koneksi dial-up tetap berjalan meski Fast User Switching
di-enable, masuk ke registry di direktori
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon.
c. Klik kanan pada panel sebelah kanan dan pilih New |String Value.
Beri nama KeepRasConnections dan beri nilai 1. Restart komputer.

51. Untuk melihat isi sesungguhnya folder My Recent Documents, klik
Start|Run, kemudian ketikkan %UserProfile%\Recent.

Pengaturan Multiple User

52. Untuk berpindah antar user account, tekan tombol Ctrl+Alt+Del,
kemudian pada window Task Manager yang terbuka, pilih tab Users. Klik kanan
nama user yang hendak dipakai dan klik tombol Connect.

53. Tambahkan account Guest supaya orang lain bisa menggunakan komputer
Anda. Caranya, buka User Accounts di Control Panel, klik Guest|Turn On
the Guest Account.

54. Ingatlah untuk selalu login sebagai System Administrator sebelum
melakukan perubahan yang berimbas pada performa komputer.

55. Untuk meng-copy user profile, masuk dalam Control Panel|System.
Masuk dalam tab Advance dan klik tombol Setting di User Profiles. Sorot
profile yang hendak dicopy, kemudian klik Copy to dan tentukan lokasi
penyimpanan profile. Untuk mengubah permission, klik tombol Change.

56. Ganti Welcome screen dengan login dialog untuk menambah tingkat
keamanan. Caranya, masuk dalam User Accounts di Control Panel, pilih
option Change the way user log on or off serta disable Welcome screen.

57. Gunakan folder Shared Documents untuk menyimpan filefile yang bisa
dibuka orang lain dalam jaringan. Folder ini bisa ditemui di My
Documents\Other Places area.

58. Pada Windows XP Pro Edition, password bisa kadaluarsa jika lama
tidak digunakan login. Untuk menghindarinya, atur supaya Windows tidak
melakukan hal tersebut. Caranya, klik Start|Run, ketikkan userpasswords2
dan Enter. Buka tab Advanced dan pilih Advanced user management, klik
tombol Advanced dan pilih Local Users and Groups. Klik kanan nama user
dan pilih Properties. Buka tab General dan enable option Password never
expires.

59. Beri nama setiap partisi atau drive yang ada dengan nama yang
berbeda. Hal ini penting untuk mempermudah pencarian file.

60. Buat sebuah password reset disk sebagai disket darurat saat
kehilangan password. Caranya, masuk ke Control Panel dan buka User Account.
Pilih account Anda dan pilih Prevent a forgotten password untuk memulai
wizard.

Pengaturan File dan Folder

61. Buat sebuah compressed folder dengan cara mengklik kanan area
kosong pada desktop, dan pilih New|Compressed (zipped) Folder. Beri nama dan
drag and drop file yang hendak dikompres dalam folder tersebut.

62. Sebuah compressed folder bisa dilindungi dengan password. Caranya,
buka menu File|Add a Password. Isikan password Anda dan isi sekali lagi
untuk konfirmasi.

63. Sebuah compressed folder tetap bisa ditambah isinya dengan cara
drag and drop file yang hendak dikompres ke dalamnya.

64. Saat menjalankan Disk Cleanup, pilih option Compress old files
untuk mengompresi file-file yang sudah tidak dibutuhkan, sehingga kapasitas
harddisk bisa dihemat.

65. Enkrip atau acak file bisa dilakukan di Windows XP Pro Edition
dengan mengklik kanan My Computer, pilih Properties. Buka tab General dan
klik Advanced. Aktifkan option Encrypt contents to secure data.

66. Cara termudah mengubah nama file atau folder adalah dengan
memilihnya, kemudian menekan tombol F2.

67. Supaya Anda bisa berpindah antar folder dengan cepat, terutama pada
folder-folder yang sering dibuka, buatlah shortcut untuk setiap folder
yang sering diakses.

68. Reset file association dengan cara menhakan tombol Shift saat
mengklik kanan sebuah file. Pilih Open With… Pilih program yang hendak Anda
gunakan untuk membuka file tersebut dan enable option Open use the
selected program to open this kind of file. Kemudian klik OK.

69. Sesuaikan kapasitas penyimpanan file musik dengan cara membuka
Windows Media Player dan memilih menu Tools|Options. Buka tab Copy Music
dan sesuaikan ukuran kapasitas dengan menggeser slider.

70. Jika Anda menyimpan semua dokumen dalam folder My Documents, maka
semua file tersebut lebih mudah di-back-up serta tidak terpengaruh
system restore.

71. Jika sebuah file hasil copy dari CD tidak dapat diakses, maka
hilangkan atribut Read only. Caranya, klik kanan file tersebut dan pilih
Properties. Hilangkan tanda centang pada option Read only.

72. Aturlah tampilan setiap folder dengan mengklik kanan folder
tersebut pada My Computer. Pilih Properties dan klik Customize. Pilih template
yang tersedia atau pilih gambar sesuai dengan keinginan Anda. Klik OK
untuk menyimpan hasil setting.

73. Anda bisa me-rename beberapa file sekaligus yang memiliki karakter
sama dalam folder yang sama juga. Misalnya kumpulan foto atau image.
Caranya, pilih semua file yang hendak di-rename, klik kanan file pertama
dan klik Rename. Beri nama,misalnya Koleksi.JPG, maka semua file yang
lain akan berubah namanya menjadi Koleksi (1).JPG, Koleksi (2).JPG, dan
seterusnya.

74. Mengirim Faks
Tahukah Anda, bahwa Windows XP memiliki tool untuk mengirim dan
menerima faks?

a. Buka Control Panel, pilih Add/Remove Program dan klik Add/Remove
Windows Component. Enable Fax Services dan klik Next.
b. Klik Start|All Programs|Accessories|Communication|Fax|Fax Console
untuk menjalankan Fax Configuration Wizard. Atur semua setting, termasuk
nomor faks dan modem yang digunakan serta pengaturan incoming fax.
c. Buat semua faks dari Fax Console. Periksa semua isi sebelum dikirim,
termasuk setting dan sebagainya.

Mengatur Kualitas Cetak

75. Anda bisa mencetak beberapa foto bersamaan, sekaligus mengatur
layout serta option lainnya dengan cara mudah. Pertama, buka file-file foto
dalam folder My Pictures, kemudian pilih menu File |Print. Akan muncul
Photo Printing Wizard. Atur printer yang hendak digunakan dan layout
yang akan dipakai. Beberapa printer memungkinkan mencetak beberapa foto
dalam satu kertas.

76. Daripada harus mengatur setting printer setiap kali menggunakannya,
buatlah copy printer Anda. Atur masing-masing dengan option berbeda
sesuai yang Anda butuhkan.

77. Anda bisa menggunakan karakter yang tidak ada di keyboard, namun
bisa digunakan dalam Windows dengan fitur Character Map. Untuk
membukanya, Anda bisa menemukan di Start|All Programs|Accessories|System
Toolss|Character Map. Atau ketik “charmap” tanpa tanda petik di Start|Run.

78. Untuk meng-capture sebuah adegan di file movie menjadi sebuah
image, putarlah film tersebut dan tekan tombol Stop saat adegan yang
diinginkan. Klik Take Picture, simpan di folder Anda dan beri nama.

Memunculkan Penampakan Fitur Tersembunyi

79. Anda tertarik dengan musik pembuka Windows yang orisinal? Temukan
file-nya di \windows\oobe\system32\images\tittle.wma.

80. Ada dua edisi Windows Plus! yang beredar, yakni Microsoft Plus! for
Windows dan Digital Media Edition (DME). Simak
www.microsoft.com/windows/plus/PlusHome.asp dan coba versi trial DME.

81. Ketikkan “iexpress” tanpa tanda petik pada kotak dialog Start|Run.
Anda akan menemukan sebuah utility untuk mengompres dan membuat file
self extraction.

82. Anda akan menemukan beberapa tool yang kurang populer, namun punya
kelebihan luar biasa. Tool-tool tersebut bisa ditemui di folder
support\tools dalam CD instalasi Windows XP. Gunakan program suptools.msi
untuk menginstalasi tool-tool tersebut dalam komputer Anda.

83. Ada banyak wizard atau stepby-step di Windows. Untuk mengetahui
wizard apa saja, buka Help and Support dan ketikkan “Wizard” tanpa tanda
petik pada kolom pencarian. Windows akan memunculkan daftar wizard yang
tersedia. Anda tinggal memilihnya.

84. Untuk membuat karakter sendiri, klik Start|Run dan ketikkan
Eudcedit. Buat sesuai keinginan Anda, asalakan masih dalam ukuran 64×64 grid.
Simpan dengan memilih menu Edit|Save Character.

85. Untuk meletakkan karakter dalam Character Map ke dalam dokumen,
Anda cukup membuka Character Map dan memilih karakter tersebut. Kemudian
Anda tinggal mengcopy dan paste-nya ke dalam dokumen Anda.

Menghias Desktop

86. Anda bisa mengatur pointer mouse sesuai keinginan dengan membuka
tab Pointer dalam menu Mouse di Control Panel. Klik Browse untuk mencari
pointer yang sesuai keinginan Anda.

87. Untuk menampilkan daftar dokumen yang terakhir diakses di Start
Menu pada Windows XP Home Edition, klik kanan pada tombol Start dan pilih
Properties. Klik Customize, buka tab Advanced dan enable option List my
most recently opened documents.

88. Jika Anda ingin agar tampilan Windows Explorer terbuka penuh hingga
menutupi taskbar, tekan tombol F11.

89. Anda bisa membuat shortcut key atau penekanan tombol tertentu untuk
mengakses sebuah program. Caranya, klik kanan icon program tersebut dan
pilih Properties. Buka tab Shortcut dan tentukan tombol mana yang Anda
gunakan untuk mengakses program tersebut. Secara otomatis Windows akan
menambahkan tombol Ctrl+Alt+ pilihan Anda sebagai shortcut key.

90. Urutkan secara alfabet, semua program yang ada di Start Menu untuk
memudahkan pengaksesan. Caranya, klik Start|All Programs, klik kanan
salah satu program yang ada dan pilih Sort by Name.

91. Munculkan penampakan icon indikator koneksi broadband atau dial-up
pada system tray untuk mempermudah kontrol. Caranya, buka My Network
Places, pilih View Networks Connections, klik kanan koneksi yang Anda
gunakan dan pilih Properties. Ubah option Show icon in notofication area
when connected menjadi enable.

92. Anda bisa mengedit Start Menu sesuai dengan kebutuhan. Baik
menambah, mengurangi, atau bahkan mengubah namanya. Caranya, klik kanan Start
dan pilih Open atau Open All Users. Atur setiap shortcut yang tersedia
sesuai kebutuhan.

93. Anda bisa membuka beberapa program secara bersamaan dengan menekan
tombol Shift, sementara mengklik program yang ada dalam Start Menu.

94. Untuk menghilangkan nama icon pada desktop, klik kanan icon
tersebut, dan pilih Rename. Tekan tombol Alt dan numeric key 255. Kemudan
tekan Enter.

95. Anda bisa menghilangkan tanda panah pada icon shortcut di desktop.
Caranya, masuk ke registry editor dengan mengetik “regedit” tanpa tanda
petik di kotak dialog Start|Run. Masuk ke dalam direktori
HKEY_CLASSES_ROOT\Lnkfile. Hapus value IsShortcut. 85

–> TOP TIPS !

96. Daftar Shortcut
Berikut ini beberapa shortcut yang paling banyak digunakan saat bekerja
sehari-hari menggunakan Windows.

[Windows] + [L] Lock komputer
[Windows] + [U] Menampilkan Utility Manager
[Windows] + [R] Menampilkan Run
[Windows] + [F] Menampilkan window pencarian
[Windows] + [E] Membuka My Computer
[Windows] + [D] Mematikan atau mengaktifkan Toggle

Desktop
[Windows] + [M] Minimize semua window
[Windows] + [Shift] + [M] Restore semua window yang di-minimize
[Windows] + [Ctrl] + [F] Mencari komputer dalam jaringan
[Windows] + [F1] Menampilkan halaman Help
[Windows] + [Break] Memunculkan window System

Properties
[Windows] + [Tab] Scroll tombol di Taskbar
Jika Anda menggunakan keyboard lama yang tidak dilengkapi dengan tombol
Windows, gunakan paduan tombol Ctrl + Esc.

97. Anda bisa meng-enable atau disable grouping beberapa file dalam
satu program. Caranya, klik kanan taskbar dan pilih Properties. Beri atau
hilangkan tanda centang pada option Groups similar taskbar button.

98. Anda bisa menghilangkan atau menampilkan icon di desktop dengan
mengklik kanan desktop dan memilih Arrange Icons By|Show Desktop Icons.

99. Anda bisa membuat custom toolbar dengan mengklik kanan taskbar,
memilih Toolbars|New Toolbar. Atur sesuai dengan keinginan Anda, misalnya
menjadikan My Documents sebagai toolbar di taskbar supaya mudah dan
cepat diakses.

100. Klik kanan Start Menu, pilih Properties, jika tidak menggunakan
Classic Start Menu, klik Customize dan buka tab Advanced. Ada beberapa
munu yang bisa diaktifkan dengan memberi tanda centang pada option yang
ada. Mulai dari Scroll Programs hingga memunculkan penampakan beberapa
fitur dalam Start Menu.

101. Anda bisa membuka sebuah situs tanpa membuka browser terlebih
dahulu. Caranya, ketikkan alamat lengkap situs yang hendak dibuka di kotak
dialog Start|Run. Misalnya www.pcmedia.co.id. Kemudian tekan Enter.

102. Di setiap menu dalam Windows terdapat huruf yang bergaris bawah
sebagai patokan penggunaan navigasi keyboard. Misalnya menu File bisa
dibuka dengan menekan tombol Alt+F. Anda bisa menonaktifkan atau
mengaktifkan fitur yang ditandai dengan garis bawah ini. Caranya, klik kanan
area kosong di desktop. Kemudian buka tab Appereance, dan klik tombol
effects. Atur tanda centang pada option Hide underlined letter for keyboard
navigation until I press the [Alt] key.

103. Atur supaya komputer mengeluarkan suara peringatan saat tombol
Caps Lock, Num Lock atau Scroll Lock diaktifkan. Caranya, Buka Control
Panel, masuk dalam Accessibility Option. Buka tab Keyboard dan enable
option Use Toggle-Keys.

104. Untuk meng-enable Hibernate dalam Windows XP saat menekan Turn Off
di Start Menu, tahan tombol Shift. Maka tombol Stand by pada kotak
dialog Shut Down akan berubah menjadi Hibernate.

105. Jika hardware Anda support Hibernate, aktifkan segera fitur ini.
Caranya, buka Control Panel dan buka Power Options. Klik tab Hibernate
dan beri tanda centang pada option Enable Hibernate. Jika hardware Anda
tidak support Hibernate, tab ini tidak bisa ditemui.

Memperbaiki Kinerja Komputer

106. Tambah kecepatan komputer Anda dengan menghilangkan penampakan
yang bagus namun memakan banyak waktu, yakni animasi. Caranya, buka
Control Panel, dan klik ganda System. Klik tab Advanced dan tekan tombol
Performance Settings. Kemudian enable option Adjust for the best
performance.

107. Untuk mengurangi waktu booting yang terasa lama, atur di BIOS agar
booting dimulai dari harddisk baru kemudian CD atau floppy drive pada
pilihan berikutnya.

108. Atur supaya Windows hanya akan me-load program yang dibutuhkan
saja saat mulai berjalan supaya waktu loading lebih cepat dan kerja
komputer lebih ringan. Ketikkan “msconfig” tanpa tanda petik di kotak dialog
Run dan tekan Enter. Pada tab General, pilih option Selective Startup,
kemudian buka tab Startup dan nonaktifkan semua program yang tidak
perlu.

109. Anda bisa memonitor penggunaan processor dengan menekan tombol
Ctrl+Alt+Del untuk membuka Task Manager. Kemudian minimize window
tersebut, Anda akan melihat grafik penggunaan kapasitas processor di system
tray.

110. Untuk meningkatkan kecepatan menyimpan data di USB ZIP drive, buka
My Computer dan klik kanan drive ZIP tersebut. Pilih Properties, buka
tab Hardware klik Properties, kemudian buka tab Policies dan aktifkan
option Optimize for Performance.

111. Untuk mempercepat tampilan Start Menu, buka Registry Editor
(ketikkan “regedit” tanpa tanda petik di kotak dialog Run). Masuk dalam
direktori HKEY_CURRENT_USER\Control Panel\Desktop. Klik ganda value yang
bernama MenuShowDelay, ganti angka yang ada menjadi 100. Dengan cara ini,
maka delay tampilan Start Menu semakin singkat.

112. Ada cara cepat mematikan komputer. Tekan tombol Ctrl+Alt+Del, pada
windows Task Manager yang muncul, tekan menu Shut Down dan tahan tombol
Ctrl saat mengklik Turn Off. Pastikan dulu semua dokumen telah di-save.

113. Anda bisa melihat grafis yang menampilkan performance komputer
berdasarkan beberapa indikator. Misalnya penggunaan processor, memory, dan
lain sebagainya. Caranya, buka Control Panel dan klik ganda
Administrative Tools. Buka fitur Performance.

114. Anda juga bisa menambahkan beberapa indikator lain dalam fitur
Performance (di nomer 13) dengan mengklik icon + dan memilih indikator
baru apa saja yang hendak ditampilkan.

115. Anda bisa menggabungkan sebuah file registry atau .reg ke dalam
registry Windows Anda, dengan mengklik ganda file tersebut. Untuk
mengetahui fungsinya, buka dengan notepad.

116. Jika Anda menggunakan RAM sebesar 512 MB, atur agar Windows tidak
membuat paging ke disk agar performance komputer semakin meningkat.
Caranya, buka Registry Editor dan masuk dalam direktory
HKEY_LOCAL_MACHINE\SYSTEM|Current ControlSet\Control\SessionManager\MemoryManagement.
Ubah value DisablePagingExecutive menjadi 1.

117. Gunakan Bootcfg.exe untuk mengedit boot.ini Windows XP. Caranya,
ketikkan “cmd” tanpa tanda petik dalam kotak dialog Run untuk masuk
dalam DOS Prompt, dan ketikkan bootcfg: /? setelah muncul prompt untuk
memperoleh informasi mengenai fitur dalam program ini.

118. Untuk memilih operating system dalam yang digunakan dalam sebuah
komputer yang memiliki partisi drive, buka Control Panel, masuk dalam
System kemudian buka tab Advanced. Klik tombol Startup and Recovery
Setting kemudian Edit.

119. Gunakan utility klasik chkdsk untuk men-scan harddisk dan
memperbaiki error yang ditemui. Caranya, klik Start |Run dan ketikkan “chkdsk
c:/f” tanpa tanda petik untuk men-scan dan memperbaiki drive C. Jika
Anda ingin tahu lebih banyak tentang fitur dalam chkdsk, ketikkan “chkdsk
/?”.

120. Anda bisa melewati Scanner and Camera Wizard saat memasang kamera
digital. Untuk mengaksesnya, gunakan Windows Explorer atau My Computer.
Kamera digital Anda akan tampil sebagai drive.

121. Ada utility dalam Windows XP Pro Edition yang jarang digunakan,
yakni gpedit. Jalankan utility ini dengan mengetikkan “gpedit.msc” tanpa
tanda petik di kotak dialog Run dan tekan Enter. Utility ini bisa
digunakan untuk setiap tool dan komponen yang ada di Windows. Coba satu per
satu setting yang Anda inginkan kemudian perhatikan hasilnya.

122 Mengatur Jadwal Perawatan
Daripada bersusah payah membersihkan sampah di Windows, atur agar
Windows membersihkan dirinya sendiri secara berkala dengan Schedule Task.

a. Untuk mengatur jadwal perawatan Windows secara berkala, buka Control
Panel, klik ganda Scheduled Tasks. Tambahkan Scheduled Task melalui
wizard. Klik Next untuk masuk dalam list berisi program yang bisa
dijadwalkan.
b. Jika tool yang hendak Anda jadwalkan tidak tertera pada list, klik
Browse dan arahkan ke folder tempat tool yang Anda maksud berada.
Kebanyakan tool Windows berada dalam folder Windows\system32. Pilih salah
satu dan klik Open.
c. Ketik nama task tersebut dan tentukan tingkat keseringan atau
frekuensi jadwal program tersebut. Klik Next, atur setting lain yang
diperlukan dan tambahkan username beserta password untuk mengamankan Schedule
Task.

123. Gunakan utility gratis PowerToys dari
www.microsoft.com/windowsxp/home/downloads/powertoys.asp yang sangat berguna. PowerToys sendiri
terdiri dari beberapa program, di antaranya Open Command Window Here,
Alt-Tab Replacement, Tweak UI, Power Calculator, Image Resizer, CD Slide
Show Generator, Virtual Desktop Manager,Taskbar Magnifier, HTML Slide
Show Wizard, dan Webcam Timershot.

124. Windows Anda bisa memperoleh tambahan kecepatan jika Indexing
Service dinonaktifkan. Caranya mudah, buka Administrative Tools di Control
Panel, pilih Services dan disable Indexing Service.

125. Kembangkan kapasitas harddisk dengan menggunakan Disk Cleanup.
Buka My Computer, klik kanan drive yang ada dan pilih Properties. Buka tab
General dan klik tombol Disk Cleanup. Bersihkan semua file sampah
tersebut, termasuk mengosongkan isi Recycle Bin dari semua data yang sudah
tidak digunakan lagi.

126. Hilangkan semua shortcut di folder Startup dalam Start Menu.
Sebab, program yang memiliki shortcut dalam folder ini secara otomatis akan
dieksekusi saat kali pertama Windows dijalankan.

127. Periksa setting messenger yang ada dalam komputer Anda, karena
hampir setiap messenger akan me-load dirinya sendiri secara otomatis
setiap kali Windows dijalankan. Usahakan agar option Automatically Login
atau Load at Windows Start tidak aktif.

128. Anda bisa mengakses setiap program secara langsung dengan
mengetikkan nama programnya di kotak dialog Run. Misalnya calc untuk
kalkulator, winword untuk Microsoft Word, dan lain sebagainya.

Troubleshooting Sederhana

129. Jika saat defrag tiba-tiba komputer berhenti, restart dan masuk
dalam Safe Mode dengan menekan tombol F8 sesaat sebelum Windows mulai
berjalan. Defrag lagi harddisk Anda dari mode ini.

130. Cari tahu apakah drive Anda FAT atau NTFS dengan mengklik kanan
drive tersebut dan memilih Properties kemudian masuk ke tab General. Baca
detail file system pada kotak dialog yang muncul.

131. Ubah sebuah drive dalam format FAT menjadi NTFS melalui DOS dengan
perintah convert c:/FS:NTFS. Masuklah dalam registry editor dan buka
direktori HKEY_USERS\DEFAULT\Control Panel\Desktop dan buat value dalam
AutoEndTask dengan nilai 1.

133. Jika saat menginstal sebuah driver baru komputer hang, restore
komputer ke konfigurasi sebelumnya. Caranya, restart komputer dan tekan F8
untuk masuk ke Safe Mode dan pilih option Last Known Good
Configuration.

134. Gunakan Event Viewer untuk melacak aplikasi yang error. Caranya,
klik kanan My Computer, pilih Manage dan klik event Viewer. Klik ganda
setiap aplikasi atau system yang menunjukkan error untuk melihat
informasi kesalahan.

135. Ada cara paling tepat untuk mengatur ketepatan jam di komputer.
Klik ganda jam di sebelah kanan bawah layar atau di system tray, pilih
tab Internet Time. Aktifkan option Automatically synchronize with an
Internet time server. Pilih server yang tersedia dan klik Update Now!

Tip dan Trik Spesial untuk Windows 98 dan ME

136. Back-up setting dial-up dengan cara men-drag and drop file koneksi
di folder Dial Up Networking ke sebuah floppy drive. File back-up akan
disimpan dalam ekstensi.dun.

137. Cara cepat restart, tekan Start|Shut Down|Restart, sementara klik
OK, tahan tombol Shift.

138. Gunakan Tweak UI khusus Windows 98 dari
www.microsoft.com/ntworkstation/downloads/powertoys/networking/nttweakui.asp. Setelah instalasi
selesai, buka Tweak UI melalui Control Panel.

139. Gunakan tombol F3 untuk membuka fitur Find saat berada di Windows
Explorer atau desktop.

140. Atur koneksi dial-up dengan Telephony Location Manager. Fitur
Telephony Location Manager ini akan membantu Anda mengoptimalkan koneksi
dial-up. Caranya, klik Start|Run dan ketikkan “tlocmgr” tanpa tanda
kutip.

141. Jika komputer Anda tidak bisa di-set Dalam mode standby atau
suspended, maka perbaiki dengan Pmtshoot dari
http://support.microsoft.com/?kbid=185949.

142. Selalu back-up registry sebelum melakukan perubahan di dalamnya.
Caranya, gunakan Registry Checker yang bisa ditemui di Start|Programs|
Accessories|System Tools|Tools.

143. Buat sebuah disket bootable untuk Windows 98 dengan cara
memformatnya menggunakan system files. Kemudian copy file
c:\windows\command\scanreg.exe dan c:\windows\himem.sys ke dalam disket tersebut. Jangan
lupa, edit file config.sys yang berada di disket dengan memberi tambahan
baris “device =a:\himem.sys” tanpa tanda kutip.

144. Untuk me-restore registry saat komputer tidak mau berjalan, coba
booting dengan boot disk. Kemudian masuk ke drive C:\ dan ketikkan
“scanreg\restore”, tanpa tanda kutip. Ikuti angkah-langkahnya hingga
selesai. Kemudian keluar dari DOS.

145. Tambahkan shortcut Control Panel ke Start Menu dengan mengklik
kanan tombol Start dan klik Open. Kemudian klik kanan di area kosong,
pilih New|Folder. Isikan “Control
Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}” tanpa tanda kutip dan tekan Enter.

146. Anda bisa menghilangkan kotak dialog password yang muncul kali
pertama sebelum masuk dalam Windows. Caranya, masuk ke Control Panel, buka
Password dan buka tab Change Password. Isi kolom password lama dengan
password yang Anda miliki, dan kosongkan kolom new password. Setelah
itu, klik tab User Profiles dan enable option All users of this PC use the
same preferences and desktop settings. Perubahan ini akan berjalan
setelah Windows di-restart.

147. Untuk membatalkan perintah Print, buka icon Printer di system tray
dengan mengklik ganda. Kemudian sorot file yang sedang di-print pada
Window Printer dan klik kanan kemudian Cancel.

148. Temukan tool-tool under DOS yang masih layak dipergunakan dalam
folder tools\MSDOS di CD Instalasi Windows 98.

149. Jika Windows 98 atau Me berjalan lambat, periksa memory. Caranya,
klik kanan My Computer dan pilih Properties. Buka tab Performance dan
lihat System Resource. Jika mencapai 80 persen, restart komputer. Ingat,
tutup semua program sebelum melihat System Resource.

150. Gunakan Sysedit untuk mengedit file-file system. Misalnya
Autoexec.bat dan sebagainya. Ketikkan “sysedit” di kotak dialog Run tanpa
diberi tanda petik.

ref http://miji.wordpress.com/2007/01/18/150-tips-trik-ampuh-untuk-windows/

Tutorial untuk mempercepat kinerja windows

noreply@blogger.com (Faozan) — Wed, 10 Oct 2007 06:30:00 +0000

1. Mematikan Service-service yang tidak berguna

Jalankan services.msc (start,run,services.msc)
matikan service-service berikut

Alerter
Application Layer Gateway Service,
Application Management
Automatic Updates
Background Intelligent Transfer
Clipbook

Automatic Updates
Distributed Link Tracking Client
Distributed Transaction Coordinater
Error Reporting Service
Fast User Switching Compatibility
IMAPI CD-Burning
Indexing Service
IPSEC Services
Messenger
Net Meeting
Remote Desktop Sharing
Network DDE
Network DDE DSDM
Portable Media Serial Number
Remote Desktop Help Session Manager
Remote Registry
Secondary Logon
Smartcard
SSDP Discovery Service
Telnet Themes
Uninterruptible Power Supply
Universal Plug and Play Device Host
Upload Manager
Webclient
Wireless Zero Configuration
WMI Performance Adaptor

2. Hapus file2 yang berada di c:\windows\prefect

EASIEST WAY TO DELETE PREFETCH.
1. Open notepad.exe, type del c:\windows\prefetch\*.* /q (without the quotes) & save as "delprefetch.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Startup" in the right window.
4. In the new window, click "add", "Browse", locate your "delprefetch.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. Reboot your computer.

3. Disable file indexing

double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties.
Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

4. Enable DMA

double-click the My Computer icon. Tab HARDWARE, pilih Device Manager
double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

5. Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility

CLEANUP STARTUP ITEMS IN MSCONFIG.
Do you ever uninstall programs and they are still listed under startup items in msconfig? Personally, I found myself with 30 such items from old installs. Microsoft leaves you no way to clean up this list, but have no fear, I have figured it out for you.
1. Open MSconfig and click on the startup items tab
2. Open Regedit and naviate to HKLM/Software/Microsoft/Sharedtools/MSconfig/startupreg
3. Compare the list of registry keys under startup reg with their counterparts in msconfig.
4. Delete the keys which are no longer valid.
5. Voila! You've cleaned up msconfig.
6. Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

to uninstall things like msn messenger and other hidden installs thru add remove programs, do this:
find sysoc.inf (you might have to enable "show hidden files" and "show hidden/protected system folders" in explorer) and open it in notepad replace all ",hide" with "," (both with out quotes) which is easiest to do with the replace all command under edit then in add/remove programs under add/remove windows compnents and whole new list of things to uninstall and add are now listed (such as internet explorer)

7. Turn off any and all unnecessary animations

double-click the My Computer icon. Tab ADVANCE pilih Select the Settings button located under Performance

8. Auto End Tasks to Enable a Proper Shutdown

Copy the following (everything in the box) into notepad.

QUOTE
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management]
"ClearPageFileAtShutdown"=dword:00000001
[HKEY_USERS\.DEFAULT\Control Panel\Desktop]
"AutoEndTasks"="1"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l]
"WaitToKillServiceTimeout"="1000"

Save the file as shutdown.reg
Double click the file to import into your registry.

9. Optimize Booting Time

Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP. The program is called BootVis

Uncompress the file.
Run BOOTVIS.EXE
For a starting point, run Trace / Next Boot + Driver Delays
This will reboot your computer and provide a benchmark
After the reboot, BootVis will take a minute or two to show graphs of your system startup.
Note how much time it takes for your system to load (click on the red vertical line)
Then run Trace / Optimize System
Re-Run the Next Boot + Drive Delays
Note how much the time has decreased

or follow this step
1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

10. Fix Corrupted Files

Put XP CD
Start>Run> sfc /scannow

11. Increase XP Folder Setting

Windows remembers 400 folder settings. When that number is reached some settings aren't retained any longer. You can change this to 8000 by adding this edit to the registry.

1. Copy the following (everything in the box) into notepad.

QUOTE
Windows Registry Editor Version 5.00

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\BagMRU]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\Bags]

[HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell]
"BagMRU Size"=dword:00001f40

[HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam]
"BagMRU Size"=dword:00001f40

[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Policies\Explorer]
"NoSaveSettings"=dword:00000000

2. Save the file as folder8000.reg
3. Double click the file to import into your registry.

12. Clearing the Page File on Shutdown

Click on the Start button
Go to the Control Panel
Administrative Tools
Local Security Policy
Local Policies
Click on Security Options
Right hand menu - right click on "Shutdown: Clear Virtual Memory Pagefile"
Select "Enable"
Reboot

For regedit users.....
If you want to clear the page file on each shutdown:

Start Regedit
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory

Management\ClearPageFileAtShutdown
Set the value to 1

13. No GUI Boot

If you don't need to see the XP boot logo,

Run MSCONFIG
Click on the BOOT.INI tab
Check the box for /NOGUIBOOT

14. Speeding the Startup of Some CD Burner Programs

If you use program other than the native WindowsXP CD Burner software,
you might be able to increase the speed that it loads.

Go to Control Panel / Administrative Tools / Services
Double-click on IMAPI CD-Burning COM Service
For the Startup Type, select Disabled
Click on the OK button and then close the Services window
If you dont You should notice

15. Increasing System Performance (If you have 512 megs or more of memory)

If you have 512 megs or more of memory, you can increase system performance
by having the core system kept in memory.

Start Regedit
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory

Management\DisablePagingExecutive
Set the value to be 1
Reboot the computer

16. Increasing File System Caching

To increase the amount of memory Windows will locked for I/O operations:

Start Regedit
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory

Management
Edit the key IoPageLockLimit

17. Disable Error Reporting

Dari Control Panel
control panel >> performance and maintenance >> system >> advanced >> error reporting
(disable all)
right click "my computer" >> manage >> services and applications >> services >> " stop
and disable" Error Reporting.

Dengan Mengubah Registry
Start/Run/Regedit
Create a new Binary value, or modify the existing value, called ‘Scancode Map’ and edit the

value according to the settings below.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\ Keyboard Layout. Value Name:

Scancode Map, Data Type: REG_BINARY (Binary Value), Value Data: 00 00 00 00 00 00 00

00 03 00 00 00 00 00 5B E0 00 00 5C E0 00 00 00 00.

18. Disable Crash Control Auto Reboot

Start/Run/Regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PCHealth\Err orReporting. Value: DoReport, 1

= Send Reports, 0 = Don’t Send.

19. Speed Up Browsing (Windows Explorer and IE)

INTERNET EXPLORER LIGHTING-FAST STARTUP.
Isn't it annoying when you want to go to a new website, or any other site but your homepage, and you have to wait for your 'home' to load? This tweak tells Internet Explorer to simply 'run', without loading any webpages. (If you use a 'blank' page, that is still a page, and slows access. Notice the 'about:blank' in the address bar. The blank html page must still be loaded..). To load IE with 'nothing' [nothing is different than blank]:
1. Right-click on any shortcut you have to IE
[You should create a shortcut out of your desktop IE icon, and delete the original icon]
2. Click Properties
3. Add ' -nohome' [with a space before the dash] after the endquotes in the Target field.
4. Click OK
Fire up IE from your modified shortcut, and be amazed by how fast you are able to use IE!

SPEED UP BROWSING WITH DNS CATCH.
when you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do this with the registry entries below:
************begin copy and paste***********
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Then merge it into the registry.

FIX IE 6 SLOWDOWNS AND HANGS.
1. Open a command prompt window on the desktop (Start/Run/command).
2. Exit IE and Windows Explorer (iexplore.exe and explorer.exe, respectively, in Task

Manager, i.e - Ctrl-Alt-Del/Task Manager/Processes/End Process for each).
3. Use the following command exactly from your command prompt window to delete the

corrupt file:
C:\>del "%systemdrive%\Documents and Settings\%username%\Local
Settings\Temporary Internet Files\Content.IE5\index.dat"
4. Restart Windows Explorer with Task Manager (Ctrl-Alt-Del/Task Manager/Applications/New

Task/Browse/C:\Windows\explorer.exe[or your path]) or Shutdown/Restart the computer from

Task Manager.

ANOTHER WAY TO FIX IEXPLORER 6 SLOW PAGES LOADED.
Here's an easier way to get to index.dat file as addresse in another tweak submitted here.
1. click on Internet Explorer
2. go to to your root dir (usually C
3. open Documents and Settings folder
4. open "your username folder"
5. open UserData
6. **close IE if you have it open**
rename index.dat to index.old
logoff and log back on (don't need to restart) open up IE and go to a web page or site that

always seemed to load slowly. It should load a lot more quickly now. NOTE. Always rename or

backup .dat or other system files before deleting.

Speed Up HTTP Requests On Internet Explorer
use Firefox Setting
1. Start the Registry Editor
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \

Internet Settings
3. Select New > DWORD Value from the Edit menu
4. "MaxConnectionsPer1_0Server"=Dword:0000000a
"MaxConnectionsPerServer"=Dword:0000000a

Configure Internet Downloads
Start/Run/Regedit HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr

entVersion\Explorer\RemoteComputer\NameSpace In the left pane find:

{D6277990-4C6A-11CF-8D87-00AA0060F5BF} Value and delete it.

Auto Disconnect for Internet Explorer
Start/Run/Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings. To

increase the number of simultaneous connections that are allowed to 10, follow these steps:

On the Edit menu, click Add Value , and then add the following registry values:

“MaxConnectionsPer1_0Server”=Dword:0000000a “MaxConnectionsPerServer”=Dword:0000000a.

Control Internet Explorer Error Reporting
Start/Run/Regedit
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main] Value Name: Disable

Script Debugger Data Type: REG_SZ (String Value) Value Data: yes or no. Create a new string

value, or modify the existing value, named “Disable Script Debugger” and set it to either

“yes” to disable the debugger or “no” to enable it. Restart Internet Explorer for the change to take effect.

Disable/Change Auto-search in Internet Explorer
Open Internet Explorer >> Click the "search" button >> click the "customize" button >> click
"autosearch settings" >> FOLLOW INSTRUCTIONS BELOW...........

DISABLE: In the "When Searching" drop down menu, select "Do not search from the address

bar".
>> click "ok" >> "ok". Type an invalid address in your address bar and see if it
takes you to the msn search page or if it gives a "page not found" error. In this
case, the "page not found" error is what we want.

CHANGE: If you wish not to disable, but you wish to change it to your favorite "google.com"
search page. Instead of following the "DISABLE" instructions, follow the instructions
below. Choose "Google Sites (or whatever you prefer)" from the "choose a search provider
to search from address bar" drop down menu >> click "ok" >> "ok"

Set negative Cache Time

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Dnscache\Parameters DWORD NegativeCacheTime=0

Mematikan network Schedule task

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\
Remote Computer\NameSpace

Delete the following key {D6277990-4C6A-11CF-8D87-00AA0060F5BF}

20. System Performance Edit in Registry

Stop Error Messages When Booting
Start/Run/Regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer. Create a new sub-key DWORD named ‘AlwaysUnloadDLL’ and set the default value to equal ‘1' to disable Windows caching the DLL in memory. Restart Windows for the change to take effect.

End Task Time Out
Start/Run/Regedit
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Windows. Value Name:

NoPopupsOnBoot, Data Type: REG_DWORD (DWORD Value), Value Data: (1 = disable messages). Stops the annoying Windows pop-up messages notifying you a device is not functioning when you boot-up Windows. Create a REG_DWORD value of ‘NoPopupsOnBoot’ in the key below (if it doesn’t already exist). Set the value to ‘1' to disable pop-up messages from appearing.

Change Default Search Options
Start/Run/Regedit
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l Add a new string value called,

“WaitToKillServiceTimeout” and change the Value to 2000. Exit, reboot.

Automatically Close Non-Responding Applications on Shutdown
Start/Run/Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\ Explorer. Data Type: REG_DWORD (DWORD Value), Value Data: (0 = unselected, 1 = selected). Modify the following values, setting them to “1? to select the parameter as a default or “0? as unselected. CaseSensitive, IncludeSubFolders, SearchHidden, SearchSlowFiles, SearchSystemDirs. Restart or logoff Windows for the change to take effect.

Speed Up Menu Display
Start/Run/Regedit
HKEY_USERS\.DEFAULT\Control Panel\Desktop, Value Name: AutoEndTasks, Data Type: REG_SZ (String Value), Value Data: (0 = disabled, 1 = enabled). Modify the value of ‘AutoEndTasks’ to equal ‘1' to automatically end tasks or ‘0' to prompt for action. Note: This change will affect all users but the value can also be changed on a user-by-user basis by modifying [HKEY_CURRENT_USER\Control Panel\Desktop] with the same values.

Control Automatic Boot Disk Optimization
Start/Run/Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\ Explorer\AutoComplete.

Value Name: Append Completion, Data Type: REG_SZ (String Value), Value Data: yes or no.

Create a new string value, or modify the existing value, named “Append Completion” and set it to “yes” to append the suggested text as you are typing or “no” to only show a drop- down list. Restart Windows for the change to take effect. Note: This setting also changes the auto complete functionality of Internet Explorer.

21. Enable DVD Player in Media Player

Remove the Upperfilters and Lowerfilters values completely from the following registry key:

Start/Run/Regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro
l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

22. Speed up the Start Menu

HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 150.

23 Turn of CD Auto Play

Open My Computer
Right click on your CD ROM and choose Properties
Click on the Auto Play tab
In the drop down box you can choose the Action for each choice shown in the drop down box Or
Go to Start->Run->gpedit.msc
Computer Config -> Administrative Template -> System
Double click Turn off Autoplay
Enable it.

24 Increase BROADBAND

This is for broad band connections. I didn’t try it on dial up but might work for dial up.
make sure your logged on as actually "Administrator". do not log on with any account that just

has administrator privileges.
start - run - type gpedit.msc
expand the "local computer policy" branch
expand the "administrative templates" branch
expand the "network branch"
Highlight the "QoS Packet Scheduler" in left window
in right window double click the "limit reservable bandwidth" setting
on setting tab check the "enabled" item
where it says "Bandwidth limit %" change it to read 0
Effect is immediate on some systems, some need to re-boot. This is more of a "counter what XP does" thing. In other words, programs can request up to 20% of the bandwidth be reserved for them, even with QoS disabled, this is no big deal and most programs do not request it. So, although QOS has caused a big stink because people think it reserves 20% of their bandwidth, you can still disable it, just to be sure, hehe.

25. AUTO DELETE TEMPORARY FOLDER.

First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows
Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

26. REMOVING SERVICES DEPENDENCIES.

This will allow you to disable a service or uninstall it from your system without effecting another service that depends on it. Here's how you do it
1. After you have set your services the way you want them and you have disabled/uninstalled something that another services depends on, run "regedit"
2. Under HKEY_LOCAL_MACHINE\System\find the service that will not function, do to another service being disabled/uninstall (found in ControlSet001\Services,
ControlSet002\Services, and CurrentControlSet\Services)
3. Once you have found the service right-click on the string value, "DependOnService,"and modify
4. You should now see a list of services that it is dependent on. Simply delete the service that you have disabled/uninstalled
5. Restart your computer and your ready to go Disclaimer REMEMBER TO BACKUP YOU REGISTRY FIRST I'm not totaly sure if this will have any negative effects on your system. I used this method after uninstalling "Netbios over Tcpip" from my system completely, so that my Dhcp service would function and I have had NO negative effects on my system.

27.Shutdown Faster

SHUTDOWN XP FASTER 1.
Like previous versions of windows, it takes long time to restart or shutdown windows xp when the "Exit Windows" sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on "Exit Windows" sub-menu and highlight it.now from sounds you can select,choose "none" and then click apply and ok. now you can see some improvements when shutting down your system.

SHUTDOWN XP FASTER 2.
Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the "Control" Folder.
Select "WaitToKillServiceTimeout"
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

28. Change "Recycle Bin" size to 1%

29. Browse the Network Faster

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\RemoteComp
uter\NameSpace
Delete subkeys {2227A280-3AEA-1069-A2DE-08002B30309D} and

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Speeds up network browsing of old Windows machines on the LAN by ignoring their scheduled tasks and printers

30. Melebarkan jalur data dari HDD biar aksesnya cepat

run : system.ini
masukin line baru
"IRQ14=4096"

31. mengubah Open Connection menjadi 70000 (SynPacket)

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters\]
"TcpNumConnections"=dword:00011170

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters\]
"TcpNumConnections"=dword:00011170

32. Setting Up TCP IP Buffer
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Serv ices\AFD\Parameters
Add "BufferMultiplier" parameter and give it a value 400 hexidecimal (which will change into 1024).

33. Setting up Provider Priority
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Serv ices\Tcpip\ServiceProvider.
Change this parameter:
Class - 1
DnsPriority - 1
HostsPriority - 1
LocalPriority - 1
NetbtPriority – 1

34. Increasing GlobalMaxTcpWindowSize

Only Work for Cable/DSL
tidak direkomendasikan untuk Dial Up

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters]"GlobalMaxTcpWindowSize"=dword:0000ffff

Default Value nya

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters]"GlobalMaxTcpWindowSize"=dword:00007fff

Tutorial konfigurasi webbrowser mozilla firefox

noreply@blogger.com (Faozan) — Mon, 01 Oct 2007 07:32:00 +0000

1. ketik "about:config" di Addresse bar (URL) lalu tekan ENTER.
setelah itu silahkan untuk di edit script d bawah ini

Code:

browser.tabs.showSingleWindowModePrefs – true
network.http.max-connections – 64
network.http.max-connections-per-server – 20
network.http.max-persistent-connections-per-proxy – 10
network.http.max-persistent-connections-per-server – 4
network.http.pipelining – true
network.http.pipelining.maxrequests – 100
network.http.proxy.pipelining – true
network.http.request.timeout – 300
nglayout.initialpaint.delay = 0
network.http.request.max-start-delay = 0
If nglayout.initialpaint.delay doesnt exist, Right click, new integer.

Optional:

Code:

network.http.max-persistent-connections-per-proxy = 10
network.http.proxy.pipelining = true
network.http.proxy.version = 1.0

lalu tutup mozilla, setelah itu di jalankan kembali.

Memoserv

noreply@blogger.com (Faozan) — Fri, 09 Feb 2007 13:02:00 +0000

Memoserv

DALnet stands out as being the largest IRC network with services. It was indeed the first to have successfully implemented ****Serv services for its users back in 1994. The most well used of these services are NickServ, ChanServ and MemoServ. This document will walk through the available MemoServ commands with you while providing syntax and examples. It will also give you some pointers on what we consider to be services abuse (regarding MemoServ) and how to report any such abuse.
A complete list of DALnet Services commands can also be found at http://www.dal.net/services. Further services related questions should be directed to one of the three DALnet owned help channels: #DALnetHelp, #Help or #IRCHelp.
Throughout the document, the command /memoserv will be used for interacting with MemoServ. It is possible that your IRC client may not support this command. If that is the case, then we suggest that you try /msg memoserv@services.dal.net or /quote memoserv instead.

1 · Requirements
There are some basic requirements before a user is able to send or receive memos using MemoServ on DALnet. Here is a list of the more important ones among them:
Both the sender and the receiver of a memo have to have registered nicks. The sender has to be using a registered nick at the time of sending the memo. The receiver will only be able to read their memos when they are using the nick that the memo was sent to.
A message sent through MemoServ has to be no longer than 255 characters. Keep in mind that a memo is supposed to be just that - a short message left as a quick note to someone. If you want to leave longer messages then we suggest that get the person's email address and write an email to them in the future. It's of course possible to spread out a message over several memos. However, any more than 2 memos at a time should really be replaced by an email.
While the memo system is a useful feature that most users take advantage of, there are understandably those who do not wish to be bothered by memos all the time. Therefore, DALnet has an option that permits the owner to turn off the memo receiving ability for a given nick. If this switch is on for a nick, then you will not be able to send memos to it. This feature will be covered in detail later on in this document.
There are some other requirements to sending a memo, however, they are more command specific and will therefore only be covered in the commands that are affected.

2 · Sending Memos
There are three types of memos. Personal memos, channel memos and global memos. Global memos are also referred to as MemoServ NEWS and can only be sent by the DALnet Administration. This feature will be covered later on in the document.
Personal memos are directed to you only, while channel memos are directed to the Ops or SOps of a given channel.

Sending a personal memo is done through the following command:
/memoserv send nick message

Example:
/memoserv send PeanutButterLover I'm not going to be there tonight, catch you tomorrow!

Where "PeanutButterLover" is the person who I am sending this memo to.
Channel memos work on the same principle. However, not everyone can send a channel memo. When a channel is first registered, the default access level for sending channel memos is set to AOp. That means that only AOps, SOps and the Founder can do so. However, in many cases, the Founder has chosen to restrict this ability to SOps only or to themselves only. In those cases, only the channel SOps or the channel Founder can send a memo to the entire channel.
/memoserv send #channel message

For example:
/memoserv send #peanutbutterlovers Hey everyone! I will not be around for the the next 10 days, if there are any problems then talk to one of the sops.

The above would have been sent to all the registered nicks in the AOp and SOp lists. If you would like to send a memo to the SOps of the channel instead, then the following command must be used:
/memoserv sendsop #channel message

Example:
/memoserv sendsop #peanutbutterlovers What does everyone think about aopping PeanutLovingLady? She has been around a lot recently ...

Think carefully before you send channel memos. If this is an issue that doesn't concern everyone, then you might consider sending a memo to those people instead. Keep in mind that not everyone likes to receive a lot of memos, especially if most of the information is useless to them. You can send a total of 5 memos to a person. MemoServ will deny any other attempts unless the receiver deleted some of the previous memos first.

3 · Reading Memos
When you first use your nick, MemoServ will let you know if there are any memos for you.

-MemoServ- You have 1 new memo. To list them, use: /msg MemoServ@services.dal.net list

This leads us directly to the next command. As its name implies, the MemoServ LIST command allows you to view the memos sent to your nick. It allows you to see the nick of the sender, its number, the time it was sent and the memo's current status (new, read or marked as deleted).
/memoserv list

A MemoServ LIST will only display the first 20 memos. You will have to delete some memos before being able to view the rest with this command.
The READ command has to be used for actually viewing the content of a memo. The syntax is:
/memoserv read memo number

As mentioned before, the memo number is displayed in the output of a MemoServ LIST.

Example:
/memoserv read 1

If you have received more than one memo, then it's also possible to read a number of them at the same time. For example:
/memoserv read 1,2,3

or
/memoserv read 1,3,5

Note: All memos are deleted after 7 days, regardless of whether they have been read or not. A total of 50 memos can be stored for a nick at any one time.

4 · Deleting Memos
Once you have read a memo and have no need for it anymore, then you can delete it. Deleting a memo is actually done in two steps. First it marked as deleted and then it will be purged.
The DEL command allows you to mark one or several memos to be deleted. Marking a memo to be deleted still allows you to view the memo until it has been purged. The syntax of the DEL command is:
/memoserv del memo number(s)

For example:
/memoserv del 1
/memoserv del 1,2,3
/memoserv del 1,3,5

As you can see, the DEL command works in much the same way as the READ command. It does possess an option that READ does not have though:
/memoserv del all
The ALL switch will mark all memos as deleted and will purge them as well. Once you have used this command, there is no going back. The memos will no longer be stored anywhere.
A memo can also be purged in two other ways. All deleted memos are purged when you stop using your nick. You can also manually tell MemoServ to purge your deleted memos with the PURGE command.
/memoserv purge

Once again, once a memo has been purged, it is not available at all anymore. So please use this command with caution.

5 · Forwarding Memos
If you happen to own a secondary nick, then it's possible that you may wish for all your memos to go to your primary nicks. This way, you won't have to constantly change nicks to read memos. That is what the FORWARD option is for. It tells MemoServ to automatically forward all memos send to one nick to forward to another nick.

The syntax is:
/memoserv forward
/memoserv forward -
/memoserv forward nick password

The first command allows you to check if you already have forwarding turned on for the nick or not. If you already have forwarding turned on, then you can turn it off by using the second command.The third command is used for actually turning on the forwarding feature.

Example:
/memoserv forward ILovePeanutButter MyPeanuttyPassword321

The above command would have forwarded all the memos directed to the nick you are currently using to the nick "ILovePeanutButter" instead. "MyPeanuttyPassword321" would be the password to the nick "ILovePeanutButter". Obviously, your current nick has to be registered in order for this command to work.

6 · MemoServ News
MemoServ NEWS are news articles sent out by the DALnet administration to inform its users of important changes regarding services. They are also referred to as global memos.
As implied by its nickname, the global memos are sent to all registered nicks on the network, regardless of whether the FORWARD or NOMEMO option is turned on or not. You can use the /memoserv news command to read a news article. After reading it, the news article will automatically delete itself. If you don't read it, MemoServ will just keep reminding you of it until you get tired of the constant nagging and will read it simply to get rid of it. *wink*
Due to this, MemoServ NEWS articles are relatively rare and are only sent out for very important issues. Past articles are available at http://www.dal.net/news.

7 · NOMEMO Option
Contrary to the other commands, the NOMEMO option is set through NickServ and not MemoServ. It is considered as a nick-specific feature and is therefore a subset of the NickServ SET commands.
The command is very easy to remember. You have two possibilities:

/nickserv set nomemo on
/nickserv set nomemo off

That will turn the NOMEMO option on and off respectively. Keep in mind that the NOMEMO option actually overrides the FORWARD option. It's possible to have a forwarding nick listed even if NOMEMO is turned on, but the memos will not be forwarded and will be refused right away.
It's important to identify to your nick before using the NOMEMO commands. Otherwise the switch changes will not go through sucessfully. You can identify to your nick with

/identify password or /quote identify password among others.

8 · Abuse
As with everything, sending memos requires valuable DALnet resources. The DALnet network does not tolerate any abusive usage of MemoServ either through flooding, harassing or advertising.
At no time may you purposely use memos to flood fellow users. This includes repeated memos with the same content or memos filled with general gibberish, designed to annoy.
Repeated harassing memos are also considered a violation of DALnet policies. This includes constant threats, floods or verbal abuse.
You may not use MemoServ to advertise your channel, website or script through memos to other users unless you know for a fact that they would not mind you doing so. Depending on the severity of the offense, any violations of the above policies are liable to be dealt with through warnings, bans from the network, freezing of the nick, services ignores or an email sent to the abuse department of the user's ISP (Internet Service Provider).

9 · Reporting Abuse
If you have been the victim of services abuse involving MemoServ then you are encouraged to report it to a CSop (Channel Services Operator) or the SAbuse (Services Abuse) Team.
Unfortunately, logs are very easily faked. Therefore, a log of the incident is not sufficient for us to actually determine the validity of your report. You must meet the following conditions if you wish some action to be taken against the offender in question.
First of all, it's very important that you do not delete the memo(s). Keep in mind that a memo that has been marked as deleted will no longer be present the next time your nick is used. The memo must show up on the MemoServ LIST.
From here on, you have two choices. You can either contact the DALnet SAbuse Team with this problem or you can seek out a CSop on your own. The SAbuse Team can be reached at sabuse@dal.net. Be sure to include a complete description of the incident along with a copy of the memo received. Mention that the memo is still available and that you have not deleted it. In order for a member of the SAbuse Team to verify this incident, they will have to use and identify to your nick. Therefore, a short note mentioning that you would not mind them doing so for the purpose of verifying the report would be appreciated. Logs of any other related incidents would also not be amiss.
However, if you would like to find someone right away, a list of all CSops is available with /motd services.*. More information on how to find an IRC Operator is also available at http://help.dal.net/docs/findoper.html.

Revised by Clavelina

ChanServ Information

noreply@blogger.com (Faozan) — Fri, 09 Feb 2007 12:40:00 +0000

ChanServ Information

ChanServ has been created in order to stop channel takeovers, automate channel management, and to make life easier for users in general. Over the years many different commands have been added to ChanServ. These commands are discussed in this document.
ChanServ may be accessed through either /chanserv or /msg chanserv@services.dal.net. For the purpose of this document, we will use /chanserv as the command, however, some IRC clients (e.g. BitchX) do not support /chanserv and you will have to use /msg chanserv@services.dal.net.

1 · Registering a channel
Syntax: /chanserv register #channel password description
Information: The REGISTER command allows a user to register his/her channel (if it is not already registered) quickly and painlessly by typing one line. In order to register a channel, the user must specify the channel, the password that he or she, and a short description of his channel.
Note: Under no circumstances should you give out the password to anyone. DALnet will NOT help with takeovers if you have shared your password. Also, try to make your password something that might be simple to you but would be hard for others to guess.
In order to find out if a channel is registered or not, type /chanserv info #channel, more on that later. Also, do not forget to use the # sign when registering a channel.
Example: /chanserv register #mystro m3dj35 My home online.
This would register the channel #mystro with the password m3dj35 (a pretty complex password for someone to just guess out of the blue) and the description "My home online."

2 · Dropping a channel
Syntax: /chanserv drop #channel [dropcode]
Information: This command will allow you to drop a channel you are a founder of. You must first use the command alone and then you will receive a drop code which you type in with the command.
Note: You must identify to the channel before being able to drop it.
Example: /chanserv drop #mystro
This is the initial command, after which I would see something like this in my status window:
-ChanServ- Dropping a channel is permanent and cannot be undone!
-ChanServ- To confirm, type: /chanserv DROP #mystro 13151683216
After that, I would type the command /chanserv DROP #mystro 13151683216 to finalize if I was sure.

3 · Identifying as a channel's founder
Syntax: /chanserv identify #channel password
Information: The identify command identifies the user as the founder of that channel and gives the user access to founder-based commands.

4 · Retrieving a password
Syntax: /chanserv sendpass #channel email
Information: The sendpass command allows the founder to have his channel password sent to the email address associated with the channel in the services database. Using that function, the founder may have his password sent to him incase of a lost/forgotten password.

5 · Adding/removing/listing SOps
Syntax: /chanserv sop #channel add/del/list/wipe [nick]
Information: The command allows the founder to add or remove a SuperOP to the channel access list. The list command, however, can be accessed by AOps' and up.

6 · Adding/removing/listing AOps
Syntax: /chanserv aop #channel add/del/list/wipe [nick]
Information: This command lets any SOp or the Founder add or remove auto ops from the channel. The LIST argument in the command can be accessed by AOps and up.
Note: The AOp list is limited to 300 entries. Wipe may only be used by founder

7 · Adding/removing/listing AKicks
Syntax: /chanserv akick #channel add/del/list/wipe [nick/host]
Information: Akicks are Auto Kicks and may be added by a SOp or Founder; however only a founder may wipe akicks.

8 · Oping / Deoping people
Syntax: /chanserv op/deop #channel nickname
Information: This command is pretty simple, it allows you to op or deop a nickname in a channel without having to be opped or even be in the channel. You must be an AOp or higher in order to use this command.
Note: You may not deop someone who has higher ChanServ access than you

9 · Mass kicking a channel
Syntax: /chanserv mkick #channel
Information: The MKick (Mass Kick) command is used in case of a desync (more information in the Netsplits document) in which case the channel has to be closed and reopened.
Note: The command may not be used if someone higher than you is in the channel. (e.g. AOps can't mkick when a SOp is present, SOps can't mkick when the founder is present).

10 · Mass Deoping a channel
Syntax: /chanserv mdeop #channel
Information: The MDEOP command will deop everyone in the channel who have equal or less access in ChanServ than the person using the command.

11 · Setting options in channels
The SET command has many different arguments including FOUNDER, PASSWD, DESC, MLOCK, OPGUARD, KEEPTOPIC, URL, IDENT, RESTRICT and VERBOSE. All these commands will modify and change how ChanServ acts in your channel and you should take some time to get familiar with them as they will help you in keeping your channel secure.
Note: To use the ChanServ SET command and its arguments, make sure you are identified as the channel founder (more below).

11.1 Changing channel founders
Syntax: /chanserv set #channel founder
Information: The FOUNDER argument of the set command will allow the user that uses this command to change the channel founder to himself.
Note: The nickname that the user is using must be registered or the command will not work

11.2 Changing channel passwords
Syntax: /chanserv set #channel passwd oldpassword newpassword
Information: This argument will change the password of the channel from an old password to a new password. It is a good idea to rotate your password once every few months to improve security.
Example:/chanserv set #mystro passwd m3dj35 m3dj36
This command will set the channel password from m3dj35 to m3dj36

11.3 Changing channel description
Syntax: /chanserv set #channel desc newdescription
Information: The DESC argument lets a user change the description of his or her channel which can be viewed through the /chanserv info command.
Example: /chansev set #mystro desc Mystro's home on the web!
This command will change #mystro's channel description to 'Mystro's home on the web!'

11.4 Changing the channel modes
Syntax: /chanserv set #channel mlock modes
Information: The MLOCK command is one of the most important commands to maintain channel security. Below is a list of all the possible modes and what they do:
+R - Only registered nicks allowed. Very useful if you wish to stop clone attacks, since most clone attacks use unregistered nicks.
+n - No external messages. This option prevents people who are not in channel from sending messages to that channel.
+t - Only ops set topic. This command will make sure non-ops cannot change the topic of the channel.
+s and +p - Both commands set the channel to be invisible in /list commands, but +s also sets it invisible in whois, both settings are a good way to keep unwanted users out of channel.
+i - This option makes the channel closed to anyone unless an op invites them or they have ChanServ invite them using the /chanserv invite command.
+k - This option sets a password on the channel which a user must type in order to join.
+l - This option limits the amount of users that may join the channel.
+m - This option prevents anyone who is not voiced or OPed from talking in the channel.
+c - This option will disable any control codes (color, bold, underline, reverse) from being sent to the channel and will those messages. Also useful against clone attacks.
For more information on modes check out http://help.dal.net/docs/modes.html
Note: Some of the options require another argument (ie. +l needs a number, +k needs a password) so the arguments need to be specified in the order of the options. (ie. +kl password number)
Example: /chanserv set #mystro mlock +ntR-s
This command would set #mystro to +ntR-s which means only ops can change topic, no external messages, registered nicks only and secret can't be set.

11.5 Setting OPGUARD on and off
Syntax: /chanserv set #channel opguard on/off
Information: When this argument is set on only AOps, SOps and the Founder will be allowed to be an op in the channel, everyone else will automatically be deopped.

11.6 Setting KEEPTOPIC on and off
Syntax: /chanserv set #channel keeptopic on/off
Information: If a channel becomes empty (last person leaves), ChanServ will save the topic if this option is set on so that next time someone comes in the topic will be recreated with the nick who set it.

11.7 Making a URL show in the info
Syntax: /chanserv set #channel url [URLhere]
Information: This command lets you set the URL for your channel which can be viewed through the /chanserv info command. To remove a URL, type the command without a URL at the end.

11.8 Ops have to identify before getting opped
Syntax: /chanserv set #channel ident on/off
Information: The ident argument regulates whether people can get opped in the channel automatically without having to identify (access list) or must identify. (Please see http://help.dal.net/docs/nickserv.html#5 for more information on access lists).

11.9 Restricting a channel to AOps and higher
Syntax: /chanserv set #channel restrict on/off
Information: The RESTRICT argument, when set on, will not allow anyone who is not on the channel access list to join the channel and will automatically kick and ban them.

11.10 Turning VERBOSE on and off
Syntax: /chanserv set #channel verbose on/off
Information: The VERBOSE argument, when set on, will notify channel ops of any changes made to the channel access list (ie. aop added/removed, sop added/removed, akick added/removed).
An example of output would be:
-ChanServ:@#mystro- [VERBOSE] Mystro!mystro@sun.2kservices.com => aop #mystro add |Mystro|

11.11 Setting who can change the topic
Syntax: /chanserv set #channel topiclock founder/sop/off
Information: The TOPICLOCK command, when turned on, will allow you to set who should be able to change the topic: You (the founder), a SOp, or anyone else (off).

11.12 Allowing users who join to stay opped
Syntax: /chanserv set #channel leaveops on/off
Information: This command, when turned on, will not deop the first user to join the channel regardless of whether he is an op or not, if set off (as it is by default), it will deop anyone who is not AOp or higher. It is recommended you leave this setting untouched for security.

11.13 Founder does not need to identify
Syntax: /chanserv set #channel unsecure
Information: This command, when turned on, will allow anyone on the founder's nick access list to make founder type changes to the channel. It is suggested to leave this argument untouched.

11.14 Making the channel private
Syntax: /chanserv set #channel private on/off
Information: This setting, when turned on, will prevent the /chanserv invite command from being used. It will also allow only people who know about the channel to access it.

11.15 Setting who may send channel-wide memos
Syntax: /chanserv set #channel memo none/aop/sop/founder
Information: This command allows the founder to manage who may send channel memos. When memo is set to none, no one can memo; when memo is set to AOp, all people on chanserv's access list may memo, when memo is set to SOp only founder and sops may memo and when the option is set to founder only the channel founder may send channel wide memos.

11.16 Setting the successor of the channel
Syntax: /chanserv set #channel successor nickname / -
Information: This command allows the founder to set the successor for the channel in case the nickname of the founder expires. When and if the nickname expires the channel will be turned over to the successor with all rights and privileges of the founder. If you wish to set the successor to no-one, use a hyphen ("-") instead of a nickname.

11.17 Setting the web password for the channel
Syntax: /chanserv set #channel webpasswd password
Information: This command allows the founder to set the web password for his channel's website on the web (see the Webhosting Services document at http://help.dal.net/docs/webhost.html for more information on channel websites).

11.18 Setting the mailblock option for the channel
Syntax:/chanserv set #channel mailblock on/off
Information: This command allows the founder of a channel to turn on/off mailblock on his channel, by that enabling/disabling the option for the channel password to be sent to the email on file in case of a lost password.
Note: By enabling this command, the founder no longer has the option to retrieve his password incase it is lost/forgotten. The mailblock option should NOT be turned on unless the founder is absolutely sure that he is not going to forget/lose the password.

12 · Inviting yourself into the channel
Syntax: /chanserv invite #channel
Information: This command will invite you into a +R/+O/+i/+l/+k/+b channel or a channel which you have been banned from by someone. You must be an AOp or higher to use that command.

13 · Viewing the access of a person
Syntax: /chanserv acc/access #channel [nick]
Information: This command lets an AOp or higher see what access he/someone else has to the channel. The access is displayed numerically, below are the definitions:
-2 = Channel is frozen or closed
-1 = AutoKICKed from the channel
0 = basic
1 = AutoOp
2 = SuperOp
3 = Has founder access via a NickServ access list mask
4 = Has founder access via identification to NickServ
5 = Has founder access via identification to ChanServ
If the USER is not online, the access will be 0.
Note: You must be an AOp or higher to use that command.
Example: /chanserv acc #mystro mystro
The following reply would come from ChanServ:
-ChanServ- Mystro ACC #mystro 5 (Founder)

14 · Why a person opped
Syntax: /chanserv why #channel nick
Information: The WHY command does the same thing as the ACC/ACCESS command, however it returns the status of the user in AOp/SOp/Founder form with no access level. It will also tell you when someone is using a different nickname what nickname he has access to that let him become opped.
Note: You must be an AOp or higher to use that command
Example: /chanserv why #mystro mystro
Below is what you would receive from ChanServ
-ChanServ- Mystro has FOUNDER access to #mystro. Reason: Identification to services with the channel password.

15 · Unbanning yourself and others
Syntax: /chanserv unban #channel [nick/*/nick!user@host]
Information The UNBAN command will unban all masks that match your nick!user@host if you do not specify a nickname. AOps may also unban a specific user or a host. SOps can unban everything by specifying the * sign instead of a nickname.

16 · Counting AOps/SOps and AKicks
Syntax: /chanserv count #channel
Information: This command counts all the AKicks, AOps and SOps in a channel and gives you the number in a reply.
EXample: /chanserv count #mystro
This will return the following:
-ChanServ- Channel: #mystro - AOP: 27 SOP: 3 AKICK: 9

17 · Finding information on a channel
Syntax: /chanserv info #channel
Information: The INFO command allows one to see specific information about channels (chanserv settings, topic, registry date, etc.)
Example: /chanserv info #mystro
This command will give out the following information:
-ChanServ- Info for #mystro:
-ChanServ- Founder : |Mystro| (mystro@66.38.188.104)
-ChanServ- Mode Lock : +nt-ilk
-ChanServ- Description: My little home on the net.
-ChanServ- Options : Verbose
-ChanServ- Memo Level : AOP
-ChanServ- Registered : Thu 09/30/1999 03:07:00 GMT
-ChanServ- Last opping: Sat 04/21/2001 13:54:14 GMT
-ChanServ- *** End of Info ***
This shows that the founder is |Mystro| with the host mystro@66.38.188.104, the channel modes are +nt-ilk, the description is 'my little home on the net.' etc.

18 · Channel Security
Now that you have gotten yourself familiarized with the ChanServ commands, it's time to move on to a very important topic: Channel Security. Each day, many people join channels such as #operhelp in order to receive help with channel takeovers, forgotten passwords, etc... Here are some tactics to help you fight all of the security problems.
1) Make your password use uppercase and lowercase letters, as well as numbers. This makes passwords much harder to guess.
2) NEVER EVER give out your password to anyone who you wouldn't trust with your life. DALnet does not help users who shared their password and later found it misused.
3) Add SOps very carefully. Also, add AOps very carefully. Don't add anyone who you don't know very well to the OP list.
4) By default, set an mlock of at least +nt. This will prevent people from changing your topic or messaging without being in the channel.
5) Don't create an auto-identify script. If you do, make sure you don't give out the script with the auto identify or you may be in serious trouble.
6) Rotate your password at least once every couple of months.
That's about it. You may want to take a look at the Passwords document (http://help.dal.net/docs/passwords.html) for more information on passwords.

revised by: clavelina

NickServ Options

noreply@blogger.com (Faozan) — Fri, 09 Feb 2007 12:36:00 +0000

NickServ Options

DALnet stands out as being the largest IRC network with services. Serv services for its users back in 1994. The most well used of these services are NickServ, ChanServ and MemoServ. This document will walk through the options available through NickServ once you have obtained a fully registered nickname.
A complete list of DALnet Services commands can also be found at http://www.dal.net/services. Further services related questions should be directed to one of the three DALnet owned help channels: #DALnetHelp, #Help or #IRCHelp.
Throughout the document, the command /nickserv will be used for interacting with NickServ. It is possible that your IRC client may not support this command. If that is the case, then we suggest that you try /msg nickserv@services.dal.net or /quote nickserv instead.

1 · Requirements, Abilities and Responsibilities
This document assumes that you have already successfully registered your chosen nickname with NickServ, and will not cover the steps required to do so. A document explaining the registration process is available at http://help.dal.net/docs/nsemail.html.
If a registered nick is not used by the owner for 30 days, NickServ will drop it, leaving it up for grabs by another user.

2 · Identifying to a nick
There are actually a number of ways to identify to a nickname. You can also identify to a nickname that you are not using at the time. The more traditional and well-known way would be:

/nickserv identify [nickname] password

Example:

/nickserv identify ILovePeanutButter
/nickserv identify PeanutButterLover IlovePeanutButter

There are also a variety of other ways to identify to your nickname:

/identify [nickname] password
/services identify [nickname] password
/msg nickserv@services.dal.net identify [nickname] password

Since /identify and /services are DALnet built-in server commands, there are some clients which may not accept them. If yours does not accept the commands, you will have to add the /quote prefix:

/quote identify [nickname] password
/quote services identify [nickname] password

3 · Requesting information on a nick
The following command is very useful for obtaining information on a registered nickname.
Syntax:

/nickserv info nickname

Example:
/nickserv info PeanutButterLover

Below is an example of what the NickServ INFO request may return as information:
-NickServ- Info for PeanutButterLover:
-NickServ- (Currently on IRC) For extra info: /whois PeanutButterLover
-NickServ- Last seen address : butter@loving.peanutbutter.ca -NickServ- Memos forward to : PeanutButter
-NickServ- Last seen time : Tue 10/24/2000 04:10:58 GMT
-NickServ- Time registered : Sun 08/22/1997 10:18:21 GMT
-NickServ- Time now : Tue 10/24/2000 04:17:37 GMT
-NickServ- URL : http://www.peanutbutter.ca/ -NickServ- Email address : janet@peanutbutter.ca -NickServ- Options: Enforced, NoOp
-NickServ- *** End of Info ***

4 · "Nickname is currently in use"
For one reason or another, your nickname may already be in use when you try to use it. Depending on the situation, there are three different commands to use.

4.1 The GHOST command
It's possible that you may have been disconnected from your ISP (Internet Service Provider) without first having logged off DALnet. This and other situations may occasionally cause the server to believe that you are still online. The nickname representing your previous connection is referred to as a ghost.
A ghost usually always disappears after a few minutes but you may not have the patience to wait. The command to get rid of a ghost is as follows:

/nickserv ghost nickname [password]

Example:

/nickserv ghost PeanutButterLover
/nickserv ghost PeanutButterLover IlovePeanutButter

4.2 The RECOVER command
If you don't have the ENFORCE option on, or if someone just started using your nick and NickServ hasn't had a chance to guest them (see section section 4.3), you have the option to disconnect someone who is currently using your nick with the RECOVER command.

/nickserv recover nickname [password]

Example:

/nickserv recover PeanutButterLover
/nickserv recover PeanutButterLover IlovePeanutButter

4.3 The RELEASE command
An enforcer appears whenever someone does not identify to NickServ for that nick within 60 seconds (provided that the ENFORCE/KILL option for that nick is turned on). The user's nick will be changed to Guest***** and an enforcer will come online. An enforcer can be recognized very easily from its whois information.

Example:
PeanutButterLover is enforcer@enforcer.dal.net * DALnet nick name enforcer
PeanutButterLover is on services.dal.net
End of /WHOIS list.

An enforcer disappears on its own after a minute or two. You may choose to wait it out, or you can use the RELEASE command to get rid of the enforcer.

/nickserv release nickname [password]

Example:

/nickserv release PeanutButterLover
/nickserv release PeanutButterLover IlovePeanutButter

5 · Access Lists and Checking Access

Using the access list can get pretty confusing, especially for the newbie user. Therefore, we have written a document solely on access lists, what they are, how to use them along with their advantages and disadvantages. This document can be obtained at http://help.dal.net/docs/nsaccess.html.
Users also have the ability to check the access of themselves or another user. This will allow them to see if the person currently using the nick has actually identified to a nick, is only using the nick or is using it without having identified. The command is:

/nickserv acc nickname

NickServ will return a number from 0 to 3. It will look something like this:

-NickServ- PeanutButterLover ACC 2

Each number represents a different level of access that the user has with the nick that they
are using at the time.

0
The nickname used is not registered.
1
The user has not identified to the nickname.
2
The user matches an access list entry for the nickname.
3
The user has identified to the nickname.

6 · Setting Options
There are many options available to the owner of a fully registered nick. Before using any of the following commands, you should have identified to your nickname. Most of the commands will not work unless you have already identified.

6.1 Changing your Password
Changing your password is very easy:

/nickserv set passwd oldpassword newpassword

An example would be:

/nickserv set passwd ILovePeanutButter IlovePB

The above command would have changed your old password of "ILovePeanutButter" to "ILovePB".

6.2 Preventing others from using your nick
One of the benefits of registering your nick is that you can prevent others from using it while you are not using it or while you are not online.
This feature was previously known as the KILL option but has since been renamed to the ENFORCE option.
When someone uses an "enforced" nick, they will be given 60 seconds to identify. Otherwise, their nickname will forcibly be changed to "Guest*****" where each * represents a random number.

/nickserv set enforce on
/nickserv set enforce off

6.3 Attaching an URL to your nick
It's possible to attach an URL to your nickname so that it displays in the NickServ INFO output. Usually, people use it to give the location of their homepage.
Syntax:

/nickserv set url [URL]

Not including the URL parameter will cause NickServ to remove the existing URL from your nick.
Examples:

/nickserv set url
/nickserv set url http://www.peanutbutter.ca/

The first would have removed the URL that was already attached to the nick. The second would have attached http://www.peanutbutter.ca/ to the nickname.

6.4 (Re)Setting an E-Mail Address
You may chose to change the email address listed for your nick to something else. This is accomplished through the SET EMAIL command.

/nickserv set email [email address]

Using the above command without an email address will cause NickServ to show you the email address that you currently have set. Actually changing your email address will naturally require you to enter a valid email address:

/nickserv set email janet@peanutbutter.ca

Keep in mind that you will have to authorize the email change before it takes effect. The authorization email will be sent to this new address, in our case, janet@peanutbutter.ca.

6.5 Displaying your E-Mail Address
By default, the email address that you have set for your nick is completely invisible to other users. If you want to display your email address in your NickServ INFO output then you have only to use the SHOWEMAIL option.

/nickserv set showemail on
/nickserv set showemail off

The former will cause NickServ to display your email address in a NickServ INFO output and the latter will prevent it from displayed.

6.6 Disabling Memos
The NOMEMO option is strongly related to MemoServ and is also covered in the DALnet MemoServ document, available at http://help.dal.net/docs/memoserv.html. In short, it will prevent others from sending memos to you. However, you will still receive global memos. It's also possible for an IRCop to force a memo on you if they wish to inform you of an issue of importance.
The command is very easy to remember. You have two possibilities:

/nickserv set nomemo on
/nickserv set nomemo off

That will turn the NOMEMO option on and off respectively.

6.7 Preventing Op Status
Just as it's possible for you to prevent memos from being sent to your nick, it's also possible for you to prevent your nick from being added to any AOp or SOp lists.

/nickserv set noop on
/nickserv set noop off

The above commands enable and disable this option respectively. Should you wish to be added to an AOp or SOp list, it will be necessary to first turn off the NOOP option and then turn it back on if desired.

6.8 Disabling SENDPASS
DALnet allows you request your password if you have forgotten it (See section 8). You may chose to disable this self-send password ability by turning the MAILBLOCK option on. Please use this command carefully since you will not be able to request assistance if you ever lose your password.

/nickserv set mailblock on
/nickserv set mailblock off

7 · Dropping a nick
You can chose to unregister your nick. The deregistration process is done in two steps. First, you have to request for a nickname to be dropped. Secondly, you have to confirm your decision to drop your nickname.
The initial DROP command is as follows:

/nickserv drop nickname

Example:

/nickserv drop PeanutButterLover

NickServ will reply something along the lines of this:

-NickServ- Dropping a nickname is permanent and cannot be undone!
-NickServ- To confirm, type: /nickserv DROP PeanutButterLover 4294401523

Follow the instructions above by entering the exact authorization number. Copy and Paste may come in quite useful here.

/nickserv drop nickname authorization code

Finally, NickServ will confirm the drop of the nickname:

-NickServ- The nick PeanutButterLover has been successfully dropped.

Dropping a nickname will also result in the automatic removal of the your webpage (http://home.dal.net/nickname) and your email address with DALnet (nickname@u.dal.net) if either case applies.

8 · "I forgot my password"
Attaching an email address to your nickname will allow you to request for a password email to be sent for that nick. The syntax of this command is:

/nickserv sendpass [nick] [email address]

Example:

/nickserv sendpass PeanutButter janet@peanutbutter.ca

The email address that you specify must match the email address that we have on file for the nickname in question. The SENDPASS command will also be disabled if your MAILBLOCK option has been turned on. See section 6.8.
If you are not able to solve a forgotten password problem on your own, you may request the assistance of an IRCop. Instructions on how to find an IRC Operator are available at http://help.dal.net/docs/findoper.html.

9 · NickServ Abuse
The DALnet network does not tolerate any abusive usage of NickServ from people who register more nicks than they can use, for the sole reason of keeping others from obtaining the nick, with any malicious intent, simply overindulgence or otherwise. If you have 5 nicknames or fewer for example, this is certainly acceptable.
Depending on the severity of the offense, any violations of the above policies are liable to be dealt with through warnings, bans from the network, freezing of the nick, dropping of the nick, seizing of the nick, services ignores or an email sent to the abuse department of the user's ISP (Internet Service Provider).
The DALnet Administration also reserves the right to seize/drop nicks of users who severely break DALnet network rules.

source dalnet and revised by Clavelina

Nickserv Access Lists

noreply@blogger.com (Faozan) — Fri, 09 Feb 2007 12:34:00 +0000

Nickserv Access Lists
This guide explains the way to control exactly how and in what circumstances you and others can use your nickname(s) on DALnet. The "control" I mentioned is provided to you by a NickServ feature known as the "access list" or by identifying to NickServ with your password each time you log on.
Finally, a brief notes - whenever I give a command to type such as :
/nickserv identify password
The command should be typed as it is shown, except that you should replace required parameters (here 'password') with the appropriate piece of information. For instance, in the above example, if your password was "apple", you would actually type
/nickserv identify apple

1 · Why you need to know this information
DALnet encourages you to read this guide because:
If NickServ always asks you for your password and you get fed up with this, you CAN fix it, and this explains how.
If this isn't the case, it's entirely possible that some others who really wanted to could use your nickname. Even if you're not paranoid about other people "pretending to be you", consider that they could get you in trouble by misbehaving in some way with your nickname.

2 · What nickname access lists are
A nickname access list is a list of addresses from which you are recognised as the authorised user of a nickname, without needing to manually send a password. These can be exact addresses or "masks" that match a range of addresses.
There are several ways in which a user may be allowed to use a registered nickname.
In order to explain these, here's a brief summary; a person may be using a registered nickname if:
1. Their address [username and hostname] matches one in the access list.
2. They sent the manual /nickserv identify password command.
3. Enforce is set off for the nick
4. Enforce is set on [in this case they can use it only for 60 seconds]
You can see by this that the "access list" is used for convenience, so that as long as you continue to use the same Internet service provider you won't normally need to type in the password each time you use your nickname.

3 · How do a username and hostname get added to your access list?
There are two ways in which this could happen:
1. You add it yourself by using the comand /nickserv access add mask (see below)
2. When you register your nick, the address you're using at that moment is automatically added to your access list (you may want to remove it; read on)

4 · How to change your nickname access list
Here are the commands for manipulating your access list. Before you use any of them, you should change to the appropriate nickname. You will also need to identify for the nick (/nickserv identify password) before you can do the ADD or DEL commands.
After you type any of these commands, NickServ will respond to show you the results or confirm that your command worked.
If there is no response, NickServ is probably lagged, so please be patient. If there is a message like nickserv - no such nick/channel or Services is currently down. Please wait a few moments, and then try again. then NickServ is probably not working at the moment; try again later.
/nickserv access list
Typing this command will show you the current access list
/nickserv access add mask
If an "address mask" is inappropriate, insecure, or no longer required, you can remove it from the list using this command.
/nickserv access del mask

5 · The pros and cons of having address masks in your access list
There are security advantages to clearing the access list, which means that you must always give NickServ the password so as to use the nick. Therefore, if the security of your nick is more important to you than convenience, this is the action you should take.
To clear your access mask list, do the following:
1. Type /nickserv identify password (where "password" is the password for your nick)
2. Type /nickserv access wipe
Once you have cleared your access list, you are going to need to identify with NickServ each time you log on to DALnet. To do this, you type:
/nickserv identify password

6 · Hostnames and usernames explained
In choosing a mask for yourself, the first thing to do is, while online, to run a /whois on yourself, and look at the results. You should see something like:
YourNick is ~user@009-443.provider.com * Your Silly Message
[etc]
or perhaps like:
*** YourNick is ~user@009-443.provider.com (Your Silly Message)
The important part is the ~user@009-443.provider.com part, which you should be able to see whatever format your IRC program uses. We'll take a closer look at the various parts of this.
Before we start: if your result looks like ~user@124.45.230.123 - i.e. four numbers and no words in the "hostname" part - please see section 8 in this guide.

6.1 The username
The username part of the above address is "~user". In fact, this itself divides into two parts - the "~" which indicates you don't have an ident server, and the "user" which is the actual username.
If at this point you change your username, you'll need to disconnect from IRC and reconnect. Then do the /whois again.
You need to know your "username" to choose a correct mask.
6.2 The hostname
The above user's hostname is "009-443.provider.com". This indicates that they are using the Internet service provider "provider.com", and that they are currently using the machine or phoneline at that provider which is number 009-443.
This hostname is what's known as a dynamic hostname. Dynamic hostnames include a number or similar code at the start, which is different each time you dial the provider to start an Internet session.
Some hostnames (for instance at a company or institution) may be static - that is, each time you start an Internet session, you'll have exactly the same hostname. Dynamic hostnames always have a number or odd code at the start; static hostnames normally are just words, but might include numbers also.
Here are some examples of static hostnames:
spelt-lib.demon.co.uk
altair.dur.ac.uk
quilt.usn.blaze.net.au
puree.ugcs.caltech.edu
And here are some dynamic hostnames:
ppp96.sagelink.net
one-pm30.norwich.net
ip022.phx.primenet.com
pc38.bgmoess-klu.ac.at

7 · Address masks explained
First, a quick note about what address masks do not include. They do not include the nickname portion *! that you might have seen in channel ban masks. They also must not include the ~ at the start of the username, which might be displayed in the /whois output. If you include either of these two things, it's likely that the mask will never work.
Address masks can be of two forms.

7.1 Exact
For instance, an address mask could be:
peter@orion.dur.ac.uk
This mask would only allow people using the exact computer or phoneline "orion.dur.ac.uk", and whose username ("email" in mIRC) was set to "peter", to use the nickname without identifying.

7.2 Wildcards
Wildcards are the * symbols you might see in address masks. A * symbol "matches" any number of characters (letters or numbers), even none at all.
For example:
"for*"
would match "forest", "fortune", "for" - anything beginning with the three letters "for".
"*st"
would match "forest", "best", "Bucharest" - anything ending with the two letters "st".
"f*st"
would match "forest", "frost", "fst", "fast" - anything beginning with "f" that also ends in "st".
"f*s*t"
would match "forest", "foresight", "frost" - anything that begins with "f", ends with "t", and has an "s" somewhere in thdIf you don't fully understand that, don't worry; such complex wildcards aren't usually needed to specify access masks.

7.3 How to choose a correct mask for yourself
So, you know your username and hostname, and whether the address is static or dynamic. What now?
If your hostname is numeric - a set of 4 numbers, instead of "words" - you should now look at section 8, which explains how to deal with this situation - these hostnames work differently from the normal type.

7.4 If you have a static address
The correct access mask for you in this case is:
username@hostname
For instance, in the unlikely event that the example I gave was a static address, the correct access mask would be:
user@009-443.provider.com

7.5 If you have a dynamic address
Things are slightly more complicated here. You basically need to replace the part of the hostname that changes each time with a *:
username@*.part-of-hostname-that-doesn't-change
For instance, a good mask for the above example would be:
user@*.provider.com
If the 009 was always the same every time that user dialed up, and only the 443 changed, then an even better mask would be:
user@009-*.provider.com

8 · Numeric hostnames
Sometimes the hostname part of your address may appear not as a name:
username@A56.myprovider.com
but as a set of 4 numbers:
username@154.43.68.56
The set of numbers - also known as an IP address - is actually the "real" host address. The reason why your hostname sometimes comes up as a number is usually lag between your service provider and the IRC server you're connecting to. In this case, the IRC server may not get a response to the "name lookup" within a reasonable time, so it falls back on using the number.
Assuming you normally get a name, if your hostname ends up being a number one time, the easiest solution is probably just to change server, or even reconnect to the same server.

9 · Things to remember and security advice
If you want your nickname to be as secure as possible
Delete all the addresses from the access mask, and use the
/nickserv identify password
command every time you log on to DALnet. (See section 5 of this guide.)
If you have a static address
If you're one of the lucky few with a static address, you should have an access list consisting of your username@hostname and nothing else. The mask in the list shouldn't have any wildcards (* symbols) since your address is always exactly the same.
Delete any other masks that might be in the list.
Because your address is static, nobody else could have a matching address, so this is quite secure; it's unlikely others will be able to abuse your nickname.
If you have a dynamic address
Most of us are stuck with dynamic addressess, unfortunately. The basic principle is to have only one mask in the list, which will "allow in" as few people as possible. Delete any other masks.
The mask should include your username, and as much of the hostname as possible (all of it that doesn't change). When you have a dynamic IP, access masks almost always allow large groups of people the potential to use your nickname. If you're not satisfied with this, your only option is to delete all access masks from the list, and manually identify with NickServ every time you use

source dalnet and revised by Clavelina

Registrasi NickServ DALnet

noreply@blogger.com (Faozan) — Fri, 09 Feb 2007 12:31:00 +0000

Registrasi NickServ DALnet

Dokumen ini menjabarkan tahap-tahap untuk melakukan registrasi nickname di DALnet. Registrasi nickname (nick) di DALnet saat ini diproses dalam 2 tahap. Alamat email harus dicantumkan saat anda melakukan registrasi nickname. Dalam 24 jam, nick tersbut akan kadaluarsa jika anda tidak melakukan konfirmasi melalui email atau IRC. Oleh karena itu sangat penting untuk menyertakan alamat email yang masih berlaku.

Dokumen ini merupakan bagian dasar dari channel #ServHelp yang dipegang oleh DALnet Events Team – http://help.dal.net/events.

1. Bagaimana Cara Meregistrasi Nick Anda

Perintah:

/nickserv register password email address

Contoh:

/nickserv register PeanuttyButtery Pass12 janet@peanutbutter.ca

PeanuttyButtery12 adalah password anda dan janet@peanutbutter.ca alamat email anda.

Ada beberapa hal yang harus anda perhatikan dalam memilih sebuah password. Untuk informasi lebih lanjut mengenai hal ini, anda dipersilahkan untuk melihat Petunjuk Password DALnet (DALnet Password Guide) di http://help.dal.net/docs/passwords.html.

2. Bagaimana Cara Mengidentifikasi Nick Anda

Anda diharuskan untuk melakukan identify nick sebelum dapat menggunakan perintah-perintah yang lainnya. Berikut dua buah cara yang biasa dilakukan untuk mengidentifikasi sebuah nick:

/msg nickserv@services.dal.net identify nick password
/nickserv identify nick password

Contoh:

/msg nickserv@services.dal.net identify PeanuttyButteryPass12
/msg nickserv@services.dal.net identify PeanutButterLover PeanuttyButteryPass12
/nickserv identify PeanuttyButteryPass12
/nickserv identify PeanutButterLover PeanuttyButteryPass12

Metode lain yang dapat digunakan untuk identify ke NickServ adalah:

/quote nickserv identify nick password
/identify nick password
/services identify nick password

Catatan: Sangat disarankan untuk menulisakan seluruh perintah tersebut pada window status untuk menghindari kecelakaan terlihatnya password anda. Sebagai contoh, anda akan mengirimkan password pada channel yang terbuka jika anda lupa menggunakan perintah “slash” (/).

Jika anda tidak dapat melakukan identify nick, ingatlah bahwa password tersebut adalah hal yang sensitive. Itu berarti bahwa NickServ mengenali huruf capital dah huruf kecil secara terpisah, misalnya “apple”, “APPLE” dan “aPPLe” adalah 3 buah password yang berbeda. Pastikan anda menuliskan password secara benar. Jika anda masih menerima pesan “error”, cobalah untuk menggubakan perintah SENDPASS, seperti yang dijelaskan dalam http://help.dal.net/docs/nickserv.html. Jika tetap tidak berhasil, cobalah untuk mencari Operator IRC. Instruksi untuk menemukan salah satu dari Operator IRC tersebut dapat anda lihat http://help.dal.net/docs/findoper.html.

3. Bagaimana Cara Mengkonfirmasi Registrasi Anda

Dalam waktu kurang lebih satu jam, anda akan menerima email dari “DALnet User Registrasion” yang dikirim ke alamat email yang sudah anda set sebelumnya. Dalam email ersebut akan diberitahukan mengenai kode autorisasi (AUTH) dan bagaimana cara menggunakannya untuk melengkapi registrasi nickname anda.

Cara termudah untuk melakukan autorisasi nick anda adalah dengan meng-klik pada alamat Web (dimulai dengan http://users.dal.net/cgi-bin/verify.cgi?) di email anda. Namun jika cara ini tidak dapat anda lakukan, ada cara lain dengan tahap-tahap sebagai berikut:
1. Email yang telah terkirim untuk anda berisi perintah yang dapat anda gunakan untuk mengirimkan kode autorisasi. Jika memungkinkan, copy perintah tersebut dengan menggunakan “computer’s paste-buffer”. Jika anda tidak dapat melakukan itu, tuliskan kode tersebut diatas kertas.
2. Masuk ke dalam DALnet (irc.dal.net 7000).
3. Jika anda meng-copy perintah tersebut, paste-kan ke IRC. Jika anda tulis perintah tersebut, ketikan di IRC.
4. Kirimkan perintah tersebut. Anda harus menerima konfirmasi dari NickServ yang menyatakan kalau anda telah melakukan autorisasi. (Pada beberapa klien IRC, konfirmasi tersebut akan tampak pada window status)

-NickServ- Mission accomplished! The nick YourNick is fully
-NickServ- registered. You now have access to change your nick
-NickServ- settings, send memos to other users and use DALnet's
-NickServ- registered user web site at http://users.dal.net

Jika anda ingin menggunakan “/quote nickserv” atau “/msg nickserv@services.dal.net”, copy/paste sisa perintah dalam email anda yang diikuti dengan kata “/nickserv” sebagai bagian dari perintah tersebut.

Anda harus mencoba men-set kode AUTH untuk nick anda yang telah diregistrasi dengan lengkap. NickServ akan merespon sebagai berikut:

-NickServ- This nick is already fully registered.

4. Mengganti Alamat Email Anda

Anda mungkin ingin mengganti alamat email yang berhubungan dengan nick anda. Perintah yang digunakan untuk merubahnya adalah:

/nickserv set email email address

Contoh:

/nickserv set email janice@delightful.net

Harap dicatat bahwa perubahan email ini tidak akan berhasil sampai anda melengkapinya dengan kode autorisasi yang terkirim pada alamat email anda tersebut.

Anda dapat menggunakan perintah SET EMAIL tanpa parameter apapun untuk melihat alamat email yang telah anda set untuk nickname anda:

/nickserv set email

`5. Mengapa Setting Alamat Email Penting`

5.1 Keistimewaan Meregister Nicname Secara Lengkap

Beberapa keistimewaan yang anda dapatkan setelah melakukan autorisasi, yaitu:

· Anda dapat menggunakan perintah identify
· Anda dapat menggunakan perintah set email
· Anda dapat menggunakan perintah drop
· Anda dapat meregister sebuah channel
· Anda dapat masuk kedalam http://users.dal.net dan membuat sebuah website di http://home.dal.net.
Keistimewaan tidak anda dapatkan jika anda hanya melakukan partial register nickname (tidak lengkap), yaitu:
· Anda tidak dapat menggunakan MemoServ untuk mengirimkan atau menerim memo.
· Anda tidak dapat menggunakan list akses NickServ (perintah akses).
· Perintah NickServ berikut tidak akan dapat anda gunakan: set enforce, set url, set mailblock, set noop, ghost, recover dan release.

Informasi tambahan untuk perintah-perintah tersebut, silahkan kunjungi http://help.dal.net/docs/nickserv.html, ketik `/nickserv help` ketika berada dalam DALnet, atau kunjungi http://www.dal.net/services.

5.2 Mengirimkan Password Melalui Email

Tujuan keseluruhan dari setting sebuah alamat email bagi nick anda adalah untuk mengirimkan password melalui email jika saja anda lupa akan password anda. Cara ini lebih aman untuk mendapatkan password yang hilang dibandingkan dengan mencoba meyakinkan Csop bahwa anda adalah pemilik sesungguhnya dari nick tersebut.

Bagaimana proses kerja dari password ini? DALnet mengijinkan user untuk mendapatkan kembali password mereka melalui perintah SENDPASS. Anda harus memiliki alamat email untuk nickname tersebut saat anda meminta SENDPASS nickname dan alamat email untuk nickname founder ketika anda meminta SENDPASS channel. Hanya satu SENDPASS per email yang diijinkan setiap 72 jam. Jadi, jika seseorang lupa baik password nickname dan channel, maka mereka harus menunggunya. Penjelasan mengenai perintah SENDPASS dapat anda lihat di: http://help.dal.net/docs/nickserv.html.

6. Kerahasiaan Alamat Email

Penjelasan tentang kerahasian email di DALnet terdapat di http://www.dal.net/emailinfo.htm. Isinya menjelaskan mengenai peraturan hukum DALnet yang menjaga kerahasiaan alamat email anda.

Jika anda ingin memperlihatkan alamat email anda dalam informasi NickServ (dengan cara /nickserv info yournick), anda dapat men-setnya kemudian. Setelah indentify nickname anda, tuliskan perintah berikut:

/nickserv set showemail on

Jika anda ingin menghapus email anda dari informasi NickServ, perintahnya adalah:

/nickserv set showemail off

6.1 “ Saya tidak ingin memberikan alamat email saya untuk anda!”

Anda benar sekali. Tetapi, kami ingin menegaskan bahwa DALnet adalah layanan gratis. DALnet tidak mengharuskan anda untuk meregister nick untuk masuk kedalam server kami.

Untuk orang-orang yang benar-benar sensitif mengenai kerahasiaan alamat email mereka, kami menyarankan untuk mendapatkan layanan email gratis untuk melengkapi registrasi nick anda. Setelah semunya selesai, anda dapat melupakan email anda tersebut. Tetapi, ingatlah jika anda melakukan ini, anda akan mengalami kesulitan dalam hal bantuan yang berhubungan dengan password anda di masa yang akan datang.

7 · Troubleshooting dan FAQ (Frequently Asked Questions)

Pertanyaan: NickServ memberitahukan saya bahwa kode AUTH tersebut salah. Apa yang harus saya lakukan?

Jawaban: Pertama, anda harus yakin nomor yang anda masukkan tersebut benar. Untuk itulah maka copy dan paste lebih disarankan jika mungkin dilakukan. Kemungkinan yang lain ialah anda telah mengubah alamat email anda dan memasukkan nomor yang berasal dari alamat email yang terdahulu. Bacalah seluruh email yang anda terima untuk menyakinkan kode AUTH yang anda masukkan adalah untuk nickname tersebut. Dalam setting email pada beberapa nick, kejadian membingungkan seperti ini sangat mudah terjadi.

Pertanyaan: Seseorang menggunakan register partial nick saya (half-registered nick). Bagaimana saya memperolehnya kembali jika saya tidak dapat menggunakan perintah RECOVER atau GHOST?

Jawaban: Periksalah email anda untuk mendapatkan kode autorisasi dan masukkan untuk melengkapi register nick anda. Setelah ini selesai, perintah RECOVER dan GHOST akan dapat anda gunakan.

Pertanyaan: Saya tidak mendapatkan kode AUTH melalui email. Apa yang harus saya lakukan?

Jawaban: Ada beberapa alasan yang mungkin terjadi. Pertama, adanya kesalahan pengetikan dalam alamat email anda. Anda dapat membuktikan alamat email yang sebenarnya kepada NickServ dengan menggunakan:

/nickserv set email

Alasan yang lainnya, kemungkinan dikarenakan keterlambatan (lag) dalam pengiriman pesan email. Jika banyak orang yang men-set alamat email bagi nickname mereka, antrian pesan yang akan dikirimkan kemungkinan memakan waktu yang lama. Tunggulah, paling tidak 6 jam sebelum anda meminta bantuan.

Pertanyaan: Saya pikir seseorang telah mencuri (hacked) password nick dan alamat email saya.

Jawaban: Keamanan password adalah tanggungjawab anda. Cobalah untuk mendapatkan password anda kembali dengan menggunakan perintah SENDPASS seperti yang dijabarkan dalam http://help.dal.net/docs/nickserv.html. Jika ini tidak berhasil, silahkan anda mengunjungi channel #operhelp dan tunggulah hingga diberikan voice oleh operator channel. Jangan merespon pesan apapun kecuali dari operator channel.

Berikut beberapa petunjuk untuk keamanan password yang baik:

Pilihlah sebuah password yang paling sedikit memiliki panjang 7 buah karakter dan terdiri dari huruf kapital maupun huruf kecil, begitu pula terdapat beberapa angka.
Jangan pernah menuliskan perintah layanan pada window channel, sebagai alternatif gunakan window yang lain (misalnya, window status).
Jangan men-script password anda dalam komputer, kemungkinan orang lain dapat mengakses komputer anda dengan sepengetahuan anda atau tidak. Anda juga harus berhati-hati dengan script yang anada gunakan. Beberapa script dapat mengijinkan orang lain, tidak hanya untuk mencuri password anda, tetapi juga mengkontrol komputer anda.
Jika anda melakukan identify nickname saat anda berada di warnet, perpustakaan atau pada pelayanan internet untuk umum, pastikan tidak ada seorang pun yang melihat password anda dan pastikan juga tidak adanya script untuk mencuri password. Pastikan pula bahwa “logging” tidak sedang diaktifkan.
Jangan pernah membagikan password dengan orang lain dan perhatikan bahwa tidak ada seorang pun dari DALnet yang akan mengirimkan pesan untuk menanyakan password anda. Satu-satunya saat anda akan ditanyakan mengenai password adalah oleh CSop yang telah anda minta untuk menolong anda.

sumber dalnet dan di terjemahkan secara bebas oleh Clavelina

TEKNIK MANUAL BASMI VIRUS BABON

noreply@blogger.com (Faozan) — Thu, 18 Jan 2007 09:25:00 +0000

caranya mudah yaitu dengan mengedit registry windows yang kita miliki atau mengetikkan perintah edit registry seperti yg di bawah ini di notepad lalu di save dengan extension file *.bat, setelah selesai di save selanjutnya tinggal menjalankan double klik file tersebut...

delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
\Windows\CurrentVersion,Bron-Spizeatus,value)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft
\Windows\CurrentVersion\Policies\System,NoClose,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft
\Windows\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft
\Windows\CurrentVersion\Policies\Explorer,NoFolderOptions,1,0,dword)
doubleext(%system%\shellnew\sempalong.exe,exe,kill)
doubleext(%windows%\shellnew\sempalong.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\Ok-SendMail-Sens-asi,dir,killdir)
doubleext(%userdir%\Local Settings\Application Data
\Loc.Mail.Bron.Tok,dir,killdir)
doubleext(%windows%\eksplorasi.exe,exe,kill)
|doubleext(%windows%\shellnew\sempalong.exe,exe,kill)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoFolderOptions,1,0,dword)
doubleext(%system%\%username%'s setting.scr,scr,kill)
|doubleext(%userdir%\Local Settings\Application Data
\csrss.exe,tok,kill)
doubleext(%userdir%\Local Settings\Application Data
\inetinfo.exe,tok,kill)
doubleext(%userdir%\Local Settings\Application Data
\lsass.exe,tok,kill)
doubleext(%userdir%\Local Settings\Application Data
\winlogon.exe,tok,kill)
doubleext(%userstartup%\empty.pif",pif,kill)
|doubleext(%usertemplates%\Brengkolang.com,com,kill)
doubleext(%system%\svchos.exe,exe,kill)
checkandkill(%windows%\tasks\at0.job)
checkandkill(%windows%\tasks\at1.job)
checkandkill(%windows%\tasks\at2.job)
delregkey(HKEY_CLASSES_ROOT\TGMfile,0,key)
delregkey(HKEY_CLASSES_ROOT\LLGfile,0,key)
delregkey(HKEY_CLASSES_ROOT\PLGfile,0,key)
delregkey(HKEY_CLASSES_ROOT\.TGM,0,key)
delregkey(HKEY_CLASSES_ROOT\.plg,0,key)
delregkey(HKEY_CLASSES_ROOT\.LLG,0,key)
changeregvalue(HKEY_CLASSES_ROOT\exefile,NeverShowExt,1,0,string)
changeregvalue(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT
\CurrentVersion
\Winlogon,shell,Explorer.exe itelnet.exe,Explorer.exe,0,string)
changeregvalue(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
\Windows\CurrentVersion
\policies\Explorer,NoFolderOptions,1,0,dword)
changeregvalue(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
\Windows\CurrentVersion
\policies\system,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\SOFTWARE\Microsoft
\Windows\CurrentVersion
\policies\system,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft
\Windows\CurrentVersion
\policies\system,DisableTaskMgr,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft

\Windows\CurrentVersion
\Policies\System,DisableTaskMgr,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Policies\Microsoft
\windows
\system,DisableCMD,1,0,dword)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion,MU,value)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion,Winsys,value)
doubleext(C:\Documents and Settings\All Users\Application Data
\BackupMe\mura.LLG,exe,kill)
doubleext(C:\Documents and Settings\All Users\Application Data
\BackupMe\mura.PLG,exe,kill)
doubleext(C:\Documents and Settings\All Users\Desktop
\Internet Explorer.exe,exe,kill)
doubleext(C:\Documents and Settings\All Users\Start Menu
\Programs\Internet Explorer.exe,exe,kill)
doubleext(C:\mura.TGM,exe,kill)
doubleext(C:\www.free-porno.com.html.exe,exe,kill)
doubleext(C:\www.free-porno.com_files
\www.free-porno.com.html.exe,exe,kill)
doubleext(C:\www.free-porno.com_files
\www.free-porno.com_files.html.exe,exe,kill)
doubleext(%virpath%\data_%username%,dir,killdir)
doubleext(filename,ico,attribute)
doubleext(filename,jpg,attribute)
doubleext(filename,bmp,attribute)
doubleext(filename,gif,attribute)
doubleext(filename,htm,attribute)
doubleext(filename,html,attribute)
doubleext(%userdir%\Local Settings\Application Data
\csrss.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\inetinfo.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\lsass.exe.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\services.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\smss.exe,exe,kill)
doubleext(%userdir%\Local Settings\Application Data
\winlogon.exe,exe,kill)
doubleext(%userdir%\Start Menu\Programs\Startup\Empty.pif,pif,kill)
doubleext(%userdir%\Templates\WowTumpeh.com,com,kill)
doubleext(%windows%\eksplorasi.exe,exe,kill)
doubleext(%windows%\ShellNew\bronstab.exe,exe,kill)
doubleext(%system%\%username%'s Setting.scr,scr,kill)
doubleext(%userdir%\Local Settings\Application Data
\Loc.Mail.Bron.Tok,dir,killdir)
doubleext(%userdir%\Local Settings\Application Data
\Ok-SendMail-Bron-tok,dir,killdir)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,NoClose,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoFolderOptions,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoFolderOptions,1,0,dword)
checkandkill(%windows%\tasks\at0.job)
checkandkill(%windows%\tasks\at1.job)
checkandkill(%windows%\tasks\at2.job)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,NoClose,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoFolderOptions,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoRun,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,NoFind,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableTaskMgr,1,0,dword)
shell(attrib.exe "%virpath%\*.*" -s -h -r /S /D)
doubleext(%system%\google.htm,htm,kill)
doubleext(%system%\nvcpl32.exe,exe,kill)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion\Run,Application,value)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion\Run,Log,value)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableRegistryTools,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\Explorer,DisableTaskMgr,1,0,dword)
changeregvalue(HKEY_CURRENT_USER\Software\Microsoft\Windows
\CurrentVersion\Policies\System,DisableTaskMgr,1,0,dword)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion\Run,lexplorer,value)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion\Run,dkernel,value)
doubleext(filename,doc,attribute)
doubleext(%windows%\lexplorer.exe,exe,kill)
doubleext(%system%\i75-d2\inz.d,d,kill)
doubleext(%system%\i75-d2\d2.mix,mix,kill)
doubleext(%system%\i75-d2\dkernel.exe,exe,kill)
doubleext(%system%\i75-d2,dir,killdir)
doubleext(%system%\ssevtmgr.exe,exe,kill)
doubleext(%userdocuments%\letter.exe,exe,kill)
doubleext(C:\Program Files\Accessories\Clean.Exe,exe,kill)
delregkey(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
\CurrentVersion\Run,LoadService,value)

referensi from www.google.com

HOW TO HACK YAHOO ID

noreply@blogger.com (Faozan) — Mon, 01 Jan 2007 02:52:00 +0000

Hiya Guys ! wass up??I guess the biggest question which all newbies askin the Hacking Forums is "How to Hack Yahoo ID's?"..So here's theanswer ...Read the tutorial carefully ..I have tried to keep thetutorial simple and straight ...So there it goes...

hmmm...the very first thing you ppl shud understand is noone can justhack your yahoo id if you dont do something silly & stupid ...Thefour most common ways of Hacking Yahoo ids are ..

1.) Social Engineering
2.) Password Crackers
3.) Using Password Stealing Trojans/Keyloggers
4.) Fake Login Pages

Social Enginnering is actually nothing but trying to know your personaland confidential details and then using it to change your password..BUT HOW? ok there's a forgot password option with Yahoo which asksfor your B'day,Country & Zip Code & later your securityquestion..Now generally lamers who try this mode of Hacking have lotsof time to waste ..They will put you into some kindafriendship/emotional trap and try to get all the above mentionedinformation .It may take 1-2 days or even 1-2 month ...(Really I pittyon such lamers !! ).

Tip 1 : Never use your real information while registering on Yahoo(Infact don't use it anywhere on net)

Now if I talk bout a Hacker's perspective...
1.) The most common Security Question is "What's your Pet name?"..Nowmost of them answer it with very common pet names..I have put on a"names wordlist "in the worldlists section of the site so try thosenames n m sure u will crack it....Beside this some lamers confuse theirNickName with Pet Names ..so if you know their Nick names u may belucky lol :-)
2.) As far as country is concerned ..try out those countries which youhave never heard of (weird names)...lol ( Probably thats what the smartvictim thinks when he chooses a country...lmao) & do checkNepal,Phillipines & Bhutan..they r d most common
3.) Zip codes...123456 /007007/ ..something like this ...coz most of the smart victims are very lazy roflmao ...:-)

The second kinda Hacking attempt is done with the Help of YahooPassword Crackers...I doubt bout their efficiency bt still some of themr lucky (other way round u r stupid lol)..Password Crackers &Password Changers use Brute Force Technique with their updatedwordlists...WHAT IS BRUTE FORCE ?I'll make it simple ..it's like usingall possible combinations and permutations on the available data andusing it as a password ..You can download some frm the Yahoo ToolsSection of the site ....Bt again it takes a hell lot of time to crack apassword ....

Tip 2: Always use alphanumeric passwords and try to keep it atleast 8 characters long ..( I personally prefer 12 characters )

As far as Hacker's perspective is concerned...

Use the worldlist which has victims B'date,phonenumber,name,zipcode,lucky color,gf's name lol..words likesexy,love,cool,fun,insane,kill,hate & boss ..(You must have thesepersonal informations or else it may take the shit out of u ..trying tohack ...).Beside this generally ppl use their vehicle number,phonenumber,social security number,credit card number etc as theirpasswords...

The third and one of the most frequently used way of hacking orstealing Yahoo password is using trojans and keyloggers ..WHAT ARETROJANS? hmmm..read the tutorial ..I have already wrtten one ...btstill TROJANS are simple programs with a server part and the clientpart ..you infect the victims computer with the server part and theserver then connects to the client running on your system and sendspasswords and vital informations..and KEYLOGGERS are programs whichrecord your keystrokes in a log.txt file and sends that log file to theHacker...The two most famous Yahoo Password stealing Trojans are MagicPS 1.5 SE ++ ( u can download it from this site ... ) & Smart PS1.5 SE ( Hmm...m trying to get it ...)...Once Infected by these trojansthe infected server sends your password to the Hackers Yahoo Messengerid as PM 's ...

How to use MAGIC PS 1.5 ?

Ok download MPS.zip from this site then run the mps.exe in it ...you'll see an user inteface...check the boxes which read"Send Password"& "Send OS name " ...and then gibe an Yahoo id on which you wantthe Hacked Passwords to be send ..If you want some icon on it thenchoose the specified icon from the list and then click "Create MPS" .Aserver.exe will be made in the same folder or in the temp folder inwindows ....Send that file to the victim and once he executes it..Bingo u Have Hacked him/her lol ....

Tip 3: If you see a regsvr.exe file in you windows folder then u rinfected ..Also check the system folder(Win98) system 32(WinXp)...Restart your windows in DOS Mode and delete the file or pressCTRL+ALT+DEL and end that process(regsvr.exe){ Not regsvr32.exe it's asystem file }or see the list of files from the combo box of MPS clientreading" files after install" and then delete it if you find any ofthem in the windows/system32 folder.Beware sometimes the new MPScreates the server in more than 1 folder.Also look for tapi1314533.exein your system32 folder( digits after tapi will vary) ** Only solutionwhich will heal it permanently is to install a good antivirus(Norton2005 /AVG updates/McAfee) are the best.

Tip 4: If u see a flash of PM window disapperaing as you login into youYahoo & see some probs with the password field(stars changing withdots or vice-versa ).then its party time u r infected ...

Tip 5: Install a good Firewall /Anti-Hacker Program to kill all remoteconnections or a good freezer which cleans all fresh installations inyour primary drive.

As far as Hacker's perspective is concerned...

Pack/Bind the sender.exe (server) so as to make it undetectable byantivirus and then use the flash icon or the setup icon to spoof yourvictim .Tell him/her that the .exe file is a software patch or somekinda fun stuff and let him/her execute that file...USE THE SEND FILEoption of Yahoo messenger for this coz Yahoo mail is protected byNorton so its gonna eat up your server(If nt packed properly).You canalso bind the server with some good softwares and then send it but becarefull that the properties of the MPS trojan are not changed (Try iton yourself first ....lol :-) )

The last form of Yahoo Password stealing is done by using FAKE LOGINPAGES ..Now wht the **** :-) is Fake login Page ?These are cloned pagesof the real Yahoo Mail Sign in pages .They look very similar to thereal conterparts and really very difficult to distinguish..Once you putinyour real id and password and press the submit button you will beeither redirected to some other pasge /invalid login page but the trickhad already been played by this time ..your id and password would havebeen mailed to the Hackers mail id by using a 3rd party SMTP server andyou don't even realize that you are HACKED...

Tip 6: Always view the address bar ..If the address bar shows something like http://mail.yahoo.com or http://edit.login.yahoo.com then its the authentic page but if its something different then DONOT login.

Tip 7: Some older versions of IE support url redirecting for eg: http://mail.yahoo.com.profile=urid.1...ww.hackeme.com Now the former portion seems to be like the authentic yahoo server address but the page is being redirected to www.hackme.com so check out the URL well...

Tip8: Geocities is NOT YAHOO ..So don't get carried away ....

As far as Hacker's perspective is concerned...

Many free webhosts provide you with a feedback form option or a formmail option .So if you know a bit of HTML you can use their sever isPOST ACTION = "" of the Yahoo Fake Page.Just do "Save As " of the realYahoo page and then edit it form action section with your freeserver'saddress..But there's a problem..Generally these pages redirect you toTHANK YOU PAGES ..So even if you manage to get the password it's of nouse coz until and unless the victim is a reall ass lamer he/she wouldchange his/her password after seeing this page ..So the best thing todo is PHP NUKE Now wats dat ?? okie you should know a bit of PHP $<-- Values and you can code you own mailer.php and call that mailerthe PHP on the submit buttons event ..Also dont forget to add some reallooking HTML to your mailer the PHP ( may be a INVALID LOGIN PAGE ..)...

Beside this there's always the fear of Physical Hacking ( Some one canjuzz sneak in to see your password while you are typin it ) So becarefull..Some ppl do use Password Changers bt thats similar toPassword Crackers which I have mentioned above..

Remember this tutorial only teaches the basic terminology behind yahoopassword stealing . Hackers are always smarter than you so you neverknow ..... __________________

Hacking Toolbox

noreply@blogger.com (Faozan) — Mon, 01 Jan 2007 02:48:00 +0000

Hacking Toolbox

Backdoor: Intrude computer and control the computer with client program.
Crack tool: Crack passwords of systems or applications, crack the serial numbers.
Disassembler: Disassemble the program with it. If you have a executable file, you can look the source code of this file with it.
DoS tool: Make computer stop to respond to any request with these tools, so other people can not access the computer.
Document: Documents about hacker, cracker, etc.
E-mail tool: Destroy the computer system using these tools, the toolsare all related to e-mail. It includes several tools about e-mail, forexample, email bomber, tool to find someone’s email address, etc.
Editor: Edit or modify your program with them.
Encryption & decryption tool: Encrypt files of almost any type using many strong cryptography algorithms.
Executable file tool: Manipulate executable files with these tools,bind some executable files, split one executable file, etc. So, forexample, you can add one executable file to another one.
ICQ tool: Destroy the computer system using these tools, the tools areall related to ICQ. All programs in it work with ICQ. With the tools,you can do many things, for example, recovering ICQ’s password, sharingyour files, and encrypting your ICQ messages, and so on.
Keylogger: Record keystrokes when the program is running, so you can get some useful information, for example, password.
MISC: Examine source code for security holes, hack games, and other interesting tools for both linux and windows.
Packet forging: Modify the data packet on network at will.
Phreak tool: Test the paging transmitters and systems, and so on, it includes box and wardialier.
Scanner: Acquire the system information, for example, open ports, OS, and so on.
Sniffer: Intercept and capture the data on the network.
Snoop tool: Show information of your system. For example, it can showIP address of your computer, or it can show SCSI and ATAPI devices inyour system, and so on.
Source code: Source code of many tools.
Spoof: Bypass an HTTP proxy, keep your connection active, creates fake credit card numbers, ip spoof, etc.
Virus: Source code of virus and executable virus.

Backdoor

1. Back Orifice: Tools about back orifice.
2. Backdoor kit: Collection of many backdoor program.
3. Backdoor source: Source of backdoor program.
4. Minigift: Another backdoor program.
5. Net spy: Allow you to gain control of another computer using the internet.
6. Trojan: Control other people’s computer.

Crack tool

1. AMI Crack: Crack the Ami BIOS.
2. AMI Decoder: Crack the password of ami BIOS.
3. ARJ Cracker: Cracks password protected ARJ Files.
4. AW: Crack the password of BIOS.
5. Adv Office 2000 Password Recovery (pro): Crack the password.
6. Adv Office 2000 Password Recovery (std): Crack the password.
7. Advanced Archive Password Recovery: Crack the password of archive.
8. Advanced Excel 2000 Password Recovery: A program to recover lost orforgotten passwords to files/documents created in Microsoft Excel.
9. Advanced NT Security Explorer: An application for Windows NT/2000/XPsystem administrators for finding holes in system security.
10. Advanced Outlook Express Password Recovery: Crack the outlook express password.
11. Advanced PDF Password Recovery Pro: Crack the PDF password.
12. Advanced Word 2000 Password Recovery: Crack the password of word 2000.
13. Advanced ZIP Password Recovery: Crack the password of zip.
14. Ami BIOS cracker: Crack password of ami BIOS.
15. BIOS / CMOS tools: Crack the password of BIOS and CMOS.
16. CryptoExplorer for Borland Paradox: Recover Borland Paradox passwords.
17. Dictionary: Used by cracker to crack the password.
18. Dictionary Maker: Makes dictionary files for password crackers.
19. FBRUTE: Crack unix password.
20. Hades cracker: Crack the password.
21. John The Ripper: Crack unix password.
22. Kill CMOS ver 1.00: Crack the password of CMOS.
23. L0phtCrack 2.01: Recover passwords for Windows NT.
24. Lilo crack: Crack password of lilo.
25. Linux crack: Crack password on linux.
26. Lotus 1-2-3 Password Recovery Key: 1-2-3 Key is a program to recover passwords for Lotus 1-2-3 documents.
27. Lotus Word Pro Password Recovery Key: Recover Lotus Word Pro Password.
28. MS Access Password Detection: Crack password of MS Access.
29. Mac crack: Crack password on Mac.
30. MailPassword: Recover lost password of e-mail.
31. MakePwl: Create the PWL files.
32. NtPassword: Find holes in system security.
33. PGP Crack: Crack the PGP.
34. PWLCRACK: Crack the PWL files.
35. PalmCrack 1.1: The password testing tool for the Palm Computing Platform.
36. Passware Kit: Recover the password.
37. Password Recovery Tools: Recover some passwords.
38. Password dictionaries: Used by cracker to crack the password.
39. PwlTools: Recover login password.
40. Quicken Password Recovery Key: Recover password.
41. Register: Register the software.
42. RemPass Ver 2.6: Crack password of BIOS.
43. SERIALS 2000: Crack the register code.
44. Serial number: Used by cracker to crack s/n.
45. THC-CUPASS: Crack password of user on a WindowsNT/W2K server.
46. THC-PrintDates: Crack password using date.
47. Unix password crackers: Crack passwords for unix.
48. Windows crack: Crack password on windows.
49. Windows password crackers: Crack password on windows.
50. Word List: Word dictionary.
51. WordPerfect Password Recovery Key: Recover passwords for WordPerfect document files.
52. Wzippwd: Creates valid serial number for Winzip.
53. ZIP Cracker: Cracks ZIP Files that are password protected.
54. iMesh Password Recovery: Recover a password installed in the iMesh client.
55. variation tool: Prepare the word list used by cracker to crack password.

Disassembler

1. ASMGEN: A program to generate cross-referenced assembly language code from any executable file.
2. Bubble Chamber: Disassemble executable files.
3. DoDi’s Visual Basic Tools: DoDi is a VB kit.
4. PROVIEW: Analyze and view system.
5. Windows Disassembler: Disassembe Windows executables and dynamic link libraries.

DoS tool

1. Black: Bomb someone’s computer with it.
2. IGMP Nuker: Bomb other’s computer with this popular tool.
3. Windows DoS kit: Attack computer systems with this useful tools.
4. pagebomb: Bomb windows pager with this tool.
5. windows95/98 patch: Patch you system in order to avoid attack by hackers.

Document

1. Article about hack: Introduce some knowledge about hack.
2. Article about hacker: Tell you how to become a hacker.
3. Articles about DoS: Describe what is DoS attack.
4. Articles about crack: Teach you how to crack.
5. Articles about programming: Introduce some knowledge about programming.
6. Aticles about hack: Narrate some knowledge about hack.
7. Books about hacking: Narrate some knowledge about hacking.
8. Books about linux: Introduce information about linux.
9. Books about network: Tell you knowledge about network.
10. Books about programming: Introduce some knowledge about programming.
11. Document about jargon: Tell you some about jargon.
12. Document about pbx: Introduce some pbx knowledge.
13. Document about phreaking: Introduce knowledge about phreaking.
14. Other documents: Introduce you some information.
15. Phrack Documents: Discuss some questions about phrack.
16. The Trojans Removal Database: Describe a lot of Trojan programs.

E-mail tool

1. Anima: Bomb some others’ computers with this tool(e-mail bomber).
2. Anonymous emailer: Send e-mail without being recognized.
3. Bomber: Bomb someone’s e-mail box with it.
4. E-mail bomber kit: Bomb some e-mail box with these tools.
5. Euthanasia: Bomb other’s e-mail address with this tool.
6. Extreme mailer: Bomb some victim’s e-mail address with it.
7. Haktek: Use this program to attack your victim or protect yourself from being hacked.
8. KaBoom!: Bomb other’s e-mail box.
9. Mail Bomb: Bomb your victim by this e-mail bomber.
10. News Mail Agent: Find any e-mail address in news groups.
11. Quick Fyre: QuickFyre is an anonymous emailer mail bomber.
12. Stealth Mailer: Send bombs to other people with this tool.
13. Unabomb: Send people email bombs.
14. Web Mail Agent: Find any e-mail address in the internet.

Editor

1. HEXCALIBUR: Examining, modify or otherwise manipulate disk files in their raw, or binary format.
2. HEXpert for Windows: Edit windows multi-format binary files.
3. Hex Workshop: Edit, insert, delete, cut, copy, and paste hex to your files.
4. Hexedit: Edit your raw files.
5. Hiew: Dump NE-executable file and dump LE/LX-executable file.
6. Script Hack Wizard: Allow you to hack or modify many language scripts with ease.
7. Support Files: Add the necessary files that script hack wizard uses to run.

Encryption & decryption tool

1. Apocalypso: Crypto tool from HNC.
2. Cryptonite Pro: Uses a superfast 64 bit encryption algorithm on Windows 95/98/Me.
3. EasyFP: Performs file encryption to protect your files and folders from being read by others.
4. Encryption: Encrypt your system information by four tools.
5. Encryption tools: Collecting a huge munber of encryption and decryption tools.
6. Encryptonite: Encrypt and decrypt text file with it easily.
7. HTML Encrypt: Encrypt your HTML/Script program.
8. Macintosh Encryption: Include various Macintosh encryption tools.
9. NetMangler: Encrypt your emails and protect yourself with NetMangler.
10. PC-Encrypt: Compress and encrypt almost any type of file.
11. PGPfreeware: Protect your email form unauthorized view.
12. WebPassword: Protect your web pages with password.
13. WinSafe: Encrypt your files with some powerful algorithms.

Executable file tool

1. Bound File Detector & Remover: Detect bound file with this tool.
2. Exe file tool: Manage the exe files with these tools.
3. Fusion: Enable static, virtual or dynamic linking, with sophisticated version control when using dynamic linking.
4. Multi Binder: Bind an unlimited number of files, of any EXE/BAT type.
5. Newjoiner: Avoid av detection.
6. PEBundle: Allow for DLLs or other files to be ??bundled?? with an executable file.
7. Topo: Scan all sections in order to find large ‘usable’ areas.
8. WinSplit: Split and join files with this tool.
9. inPEct: Bind 2 executables in one.
10. inPEct source code: Bind 2 executables in one.

ICQ tool

1. Advanced ICQ Password Recovery: Recover passwords to ICQ accounts.
2. Aquila: Recover your passwords with it.
3. ICQ Document: There are two documents about ICQ.
4. ICQ File Share: Share your files over the internet with your online friends.
5. ICQ MachineGun: Attack victim computer by ICQ.
6. ICQ kit: Attack your victim with these tools.
7. ICQr Information: Read and reveal personal information stored in Mirabilis ICQ Database (.DAT) files.
8. PGP-ICQ: Encrypt your ICQ messages.
9. SecureICQ: Allow you to encrypt messages you send and to decrypt encrypted messages you receive.
10. Send It Agent: Send very large data in no time to the ICQ users.
11. Source code about ICQ: Snoop ICQ traffic for a set host.

Keylogger

1. G2kBIOSspoof: Spoof BIOS password for gateway pc’s simply.
2. HookThis: Set a systemwide keyboard-hook.
3. Hooker: Make intelligent trojan keylogger module.
4. Invisible KeyLogger Stealth: Monitor computer activity to steal key information invisibly.
5. KeyGhost: Record keystrokes with tiny module that clips on to PC keyboard cable.
6. KeySpy: Spy program as a keyboard logger and a PC remote controller.
7. KeyTrap: Log keyboard key effectively!.
8. Keycopy: Keep a record of any keyboard activity on your computer.
9. Keylog: Include keylog tools such as Keylogwn, Keylog95, Keylog5 and Keylog25, IKS12d-m.
10. PC Acme: Monitor activity on PC and saves all information in the LOG files.
11. PC Acme Pro: Monitor software on PC and saves all information in the LOG files.
12. Phantom2: Record and playback a keystroke program for MS-DOS.
13. Playback!: Record the complete task and then play it back with one keystroke.
14. SKInNT: Monitoring program developed for Windows NT and Windows 2000.
15. Skin: Monitors kit of Skin5pro, Skin98as, Skint5, and Skin5 Demo.
16. Slog: Provide you with a log of what you have typed on your own computer for later review.

MISC

1. Game Hack: Having Game Wizard 32 and CrackAid, two tools.
2. HeadStrong WebClicker: Use public proxies to create artificial banner ad clicks.
3. Linux_misc: Collect many Linux misc tools with some source files as TCFS, SILC, DDNSF, St Jude, FreeVSD.
4. Misc: Include many misc of source codes and tools that can do such job as hijacking, monitoring, or interception, etc.
5. Quick Socket: Allow you administrator to chat (via keyboard) directly to a remote user also running Quick Socket.
6. Shutdown 2000: Disturb running application program.
7. Windows_misc: Contain all kinds of Windows misc tools, especiallyWat, Stealth Proxy, Outlook Header Exp, WebClicker2.0, Ap2.74, etc.

Packet forging

1. Netcat: Reading and writing data utility across network connections using TCP or UDP protocol.
2. Packet_Forging: Include 21 files that are all used to create and send arbitrary packets on ethernet networks.
3. Packet_tool: Having other five packing tools as tcpkill, packetx1, msmh, LibnetNT, arpinject in the kit.
4. Pksnd102: Packing 16 files as Winpkt, Pktsend, Ndis3pkt, Dump, Dumy,Dis_pkt9 in it, among which are packed or executable files and sourcefiles of packet driver programs.
5. Raw IP Packet Capture/Creation Utility: Allow you free reign to directly forge the packet in any way you so desire.
6. Snot: Use snort rules files as its source of packet information.
7. Winject: Inject packet for Windows 9x, also called drugs for Windows.

Phreak tool

1. Auto Dial: Help you to use a war dialer easily.
2. Blue Dial: Make it easy to create and use different frequency settings for dialing.
3. Boxtone: Create phone tones.
4. CATCALL: Deal out a sentence from mildly annoying to downright galling.
5. CHaoS DeViCe: Call random pagers, puts in a phone number, hangs up, and goes all over again.
6. CPhreak: It is the first fone phreaking utility.
7. Dialing Demon: Wardialer.
8. Grim Scanner: Search for dial tones and carriers in the same call.
9. No Carrier: Scan with Dos shell, graphics and more!.
10. POCSAG Decoder: Allow the off-air decoding of POCSAG paging signals at 512, 1200 or 2400 bits/second.
11. Pageit: Page a billion different pagers and put in one number, or Page ONE pager and put in a billion numbers!.
12. PhoneTag: Check for starttime every second while it’s running.
13. Phreak box: Construct and use phreak box.
14. Super Dial: Call all of your town (or cities) phone numbers.
15. THC-SCAN: Scan phone-number areas with your modem.
16. The Little Operator: It is another wardialer.
17. Tone Loc Utilities: It is also a wardialer.
18. ToneLoc: Dials numbers, looking for some kind of tone with it.

Scanner

1. 7th Dimension Port Scanner: Scan your port address more easily.
2. AB Complete Ping: Allow you to ping one or more IP addresses, toscan a network for shared resources and to scan a computer for openports.
3. Angry IP Scanner: Scan IP very easily and rapidly!.
4. Dave’s Port Sniffer: Detect FTP, HTTP, POP, SMTP, TELNET and FINGER deamons running on any TCP host machine.
5. DeadBolt: Monitor holes in Windows and alert you when it detectssuspicious activity, giving you the power to stop viruses dead in theirtracks!.
6. Linux-Vuln-source: Carry the two scanner as Rnmap and VLAD ’s system security kit!.
7. MacAnalysis: Audit suite for your Macintosh to perform and helpimplement a security standard for your computer/network by performingsome work.
8. NetBIOS Security Kit(unix): Perform various security checks on remote servers running NetBIOS file sharing services.
9. NetBIOS Security Kit(windows): Perform various security checks on remote servers running NetBIOS file sharing services.
10. Netmon: Monitor network connections.
11. Nmap: Explore or security audit network on Linux or Unix.
12. Port Invader: Scan a range or list of IP addresses to verify if there are open or closed ports.
13. Port Scanner: Scan a group of IP address looking for the presence of specific incoming TCP/IP ports.
14. PortScan: Scan port fast and configurably!.
15. Port_Scanner: Collet 20 tools to use in port sacanner on Linux or Unix!.
16. Portscan SMS Alert: Alert you when probed scandlogd logs information to syslog and invokes this shell script.
17. Scanner: Collect 84 tools and misc to scan.
18. SecureScan NX: Scan your distributed network architecture for vulnerabilities from one central location.
19. SkPortScan ActiveX Control: Integrate port-scanning capabilities into your applications with this ActiveX control.
20. THC-HappyBrowser: Check an NT-Server/Webserver for known vulnerabilities.
21. THC-Probe: Scan compilation for Linux.
22. THC-Scan: Automate tone, carrier, vmb scanning.
23. WhereIsIP: Find the geographic location of chat room members, ICQ members, and more.
24. Windows_Trojan_Scanner: Collect 6 little tools scanning whole networks to find well known Trojans.
25. Windows_port_scanner: Collect 9 Port Scanner running on Windows.
26. XSharez scanner: Scan, search and get specific resources for you.

Sniffer

1. Blackbox for AOL: Monitor application for America Online, AIM, ICQ, and Yahoo Messenger.
2. Colasoft Application Protocol Sniffer & Analyzer: It is a TCP/IPNetwork Sniffer & Analyzer program based on Windows system.
3. Ethereal0814: Free network protocol analyzer’s another version.
4. Ethereal0817: Analyze network protocol, another version of Ethereal.
5. Ethereal0820: Analyze network protocol freely for Win32.
6. Libpcap062: Needed for capturing packet to you as the packet capture library, the latest release of Libpcap.
7. Linux_sniff_source: Contain 18 sniffer tools on Linux and some source files.
8. LittleBrother: Allow supervisors to accurately manage and measure internet and network resource usage.
9. NetProb32 Network Analyzer: Analyze, Monitor Traffic, and Generator Packet program.
10. PacketX: Integrate winpcap packet capture functionality with VB orany other programming environment supporting Microsoft ActiveXtechnology.
11. Phenoelit’s own security sniffer: Open a network interface for allpackets and not only for these packets, which are send to thisinterface.
12. Proxy Workbench: It is a unique proxy server ideal for developers,trainers and security experts that displays its data in real-time.
13. Snarp: Allow the host to sniff the data from the wire.
14. Sniff-em: Base on a competively priced, performance minded Windows as a Network analyzer.
15. Sniffers: Having 34 files in it and among that are 28 sniffer tools and some source codes.
16. Socket Workbench: Designed to analyze socket communications.
17. Stealth Activity Recorder: Use newly and easily internet enabled tool for monitoring home and business PCs.
18. Tcpdump362: Capture and dumper program pretty much for the original protocol packet.
19. Windows_sniff: Facilitate the capture and visualization of network traffic kit of 5 tools and 1 source code files.
20. Winpcap: Capture and send raw data from a network card, the free Packet Capture Architecture for Windows!.

Snoop tool

1. ID: Display the ID information of machine’s specific hardware.
2. IPQuery: Show the current IP Address.
3. NetroSnooper: Find hidden files on the internet!.
4. Network Inventory: Provide network administrators with the abilityto perform a software inventory on all machines located on a network.
5. Quadsoft’s IP Tool: Tell you your IP Address in a variety of ways.
6. ShellSPY: Track every process running on your PC.
7. Trouble In Paradise: Install nothing but trouble your machine with some showing message.
8. iNetTools for Windows: Collect menu-driven testing tools for internet and IP-based networks.

Source code

1. APG: Set for random password generation.
2. ARP Monitor: Trace arp requests from/to your machine.
3. Asm: Including msmh, inpect, GetDialPasswords, it is a kit.
4. Backdoor: Includes 17 Backdoor tools in the kit with their source code.
5. Blue Beep: Blue Beep is a wardialer, this includes its source code.
6. C_SOURCE: Contain 4 files in it, and get the tools source code after decompress them.
7. Emailcrk: Crack password of e-mail account.
8. Findhost: Scan port on the net for you.
9. Harvester: Contain the source of Harvester, which monitors remote web pages and FTP directories.
10. IgmpNuke: Use IGMP packet tool’s source code.
11. Jail Chroot Project: Build a chrooted environment on POSIX with source code of C.
12. Keylogger_SRC: Include all the full source of Keylogger recording keystrokes.
13. Misc_src: Misc source code of 10 tools.
14. Network Grep: Mimick as much functionality in GNU grep as possible, applied at the network layer.
15. Nutcracker: Check/crack password tool for Unix/Linux.
16. PgpIcq: Encrypt your ICQ messages using the power of the world’s best encryption software.
17. Portscanner: Scan a group of IP address.
18. SecurityFocus ARIS Extractor: Analyze IDS log sophisticatedly and filter important attacks from the noise.
19. ShareDecryption: Extract share passwords from registry.
20. VB_SOURCE: Contain 14 files in it, and get the tools source code after decompress them.
21. Wnuke4: This is the complete wnuke4 source file package.
22. Zebedee: Secure IP tunnel tool’s source code!.

Spoof

1. Credit probe: Creates fake credit card numbers.
2. HTTPort: Establish a transparent TCP/IP tunnel through a proxy server.
3. IP Spoofer: Support IP spoofing software kit.
4. Ircgspoofer: Spoofer software on IRC Ghost.
5. Pinger: Trick your ISP into thinking you are always active.

Virus

1. Virus_exe: Including six most typical executable virus programs.
2. Virus_source: Containing many virus source codes in the package,this page will be devoted to Virii and Trojan’s, 89 files in all.

NEED THE CD??? Download Here

Code:

http://www.megaupload.com/?d=Z3RK5G91

http://www.megaupload.com/?d=X3AQJ4P2

http://www.megaupload.com/?d=3NEGK6RJ

http://www.megaupload.com/?d=V2JMPQUY

http://www.megaupload.com/?d=FA2XYT4A

http://www.megaupload.com/?d=YZ9W0LA0

http://www.megaupload.com/?d=YJP8RZHT

Take from indoforum.org

Tips dan Trik mendapatkan username dan Password dengan Google

noreply@blogger.com (Faozan) — Mon, 01 Jan 2007 02:26:00 +0000

TABEL KATA KATA KUNCI MENDAPATKAN USERNAMES
---------------------------------------------------------
KATA KUNCI | KETERANGAN
---------------------------------------------------------
inurl:admin inurl: |userlist Generic userlist files
---------------------------------------------------------
inurl:admin filetype: |asp Generic userlist files
inurl:userlist |
---------------------------------------------------------
inurl:php inurl: |Half-life statistics file, lists username and
hlstats intext: |other information
Server Username |
---------------------------------------------------------
filetype:ctl |
inurl:haccess. |Microsoft FrontPage equivalent of htaccess
ctl Basic |shows Web user credentials
---------------------------------------------------------
filetype:reg |
reg intext: |Microsoft Internet Account Manager can
---------------------------------------------------------
”internet account manager” |reveal usernames and more
filetype:wab wab |Microsoft Outlook Express Mail address
|books
---------------------------------------------------------
filetype:mdb inurl:profiles |Microsoft Access databases containing
|profiles.
---------------------------------------------------------
index.of perform.ini |mIRC IRC ini file can list IRC usernames and
|other information
---------------------------------------------------------
inurl:root.asp?acs=anon |Outlook Mail Web Access directory can be
|used to discover usernames
---------------------------------------------------------
filetype:conf inurl:proftpd. |PROFTP FTP server configuration file
conf –sample |reveals
|username and server information
---------------------------------------------------------
filetype:log username putty |PUTTY SSH client logs can reveal
|usernames
|and server information
---------------------------------------------------------
filetype:rdp rdp |Remote Desktop Connection files reveal user
|credentials
---------------------------------------------------------
intitle:index.of |UNIX bash shell history reveals commands
.bash_history |typed at a bash command prompt; usernames
|are often typed as argument strings
---------------------------------------------------------
intitle:index.of |UNIX shell history reveals commands typed at
.sh_history |a shell command prompt; usernames are
|often typed as argument strings
---------------------------------------------------------
“index of ” lck |Various lock files list the user currently using
|a file
---------------------------------------------------------
+intext:webalizer +intext: |Webalizer Web statistics page lists Web user-
Total Usernames +intext: |names and statistical information
”Usage Statistics for”
---------------------------------------------------------
filetype:reg reg HKEY_ |Windows Registry exports can reveal
CURRENT_USER |username usernames and other information
---------------------------------------------------------
TABEL KATA-KATA KUNCI MENDAPATKAN PASSWORD
---------------------------------------------------------
KATA KUNCI | KETERANGAN
---------------------------------------------------------
inurl:/db/main.mdb |ASP-Nuke passwords
---------------------------------------------------------
filetype:cfm “cfapplication |ColdFusion source with potential passwords
name” password
---------------------------------------------------------
filetype:pass |dbman credentials
pass intext:userid
---------------------------------------------------------
allinurl:auth_user_file.txt |DCForum user passwords
---------------------------------------------------------
eggdrop filetype:user user |Eggdrop IRC user credentials
---------------------------------------------------------
filetype:ini inurl:flashFXP.ini |FlashFXP FTP credentials
---------------------------------------------------------
filetype:url +inurl:”ftp://” |FTP bookmarks cleartext passwords
+inurl:”@”
---------------------------------------------------------
inurl:zebra.conf intext: |GNU Zebra passwords
password -sample -test
-tutorial –download
---------------------------------------------------------
filetype:htpasswd htpasswd |HTTP htpasswd Web user credentials
---------------------------------------------------------
intitle:”Index of” “.htpasswd” |HTTP htpasswd Web user credentials
“htgroup” -intitle:”dist”
-apache -htpasswd.c
---------------------------------------------------------
intitle:”Index of” “.htpasswd” |HTTP htpasswd Web user credentials
htpasswd.bak
---------------------------------------------------------
“http://*:*@www” bob:bob |HTTP passwords (bob is a sample username)
---------------------------------------------------------
“sets mode: +k” |IRC channel keys (passwords)
---------------------------------------------------------
“Your password is * |Remember IRC NickServ registration passwords
this for later use”
---------------------------------------------------------
signin filetype:url |JavaScript authentication credentials
---------------------------------------------------------
LeapFTP intitle:”index.of./” |LeapFTP client login credentials
sites.ini modified
---------------------------------------------------------
inurl:lilo.conf filetype:conf |LILO passwords
password -tatercounter2000
-bootpwd –man
---------------------------------------------------------
filetype:config config intext: |Microsoft .NET application credentials
appSettings “User ID”
---------------------------------------------------------
filetype:pwd service |Microsoft FrontPage Service Web passwords
---------------------------------------------------------
intitle:index.of |Microsoft FrontPage Web credentials
administrators.pwd
---------------------------------------------------------
“# -FrontPage-” |Microsoft FrontPage Web passwords
inurl:service.pwd
ext:pwd inurl:_vti_pvt inurl: |Microsoft FrontPage Web passwords
(Service | authors | administrators)
---------------------------------------------------------
inurl:perform filetype:ini |mIRC nickserv credentials
---------------------------------------------------------
intitle:”index of” intext: |mySQL database credentials
connect.inc
---------------------------------------------------------
intitle:”index of” intext: |mySQL database credentials
globals.inc
---------------------------------------------------------
filetype:conf oekakibbs |Oekakibss user passwords
---------------------------------------------------------
filetype:dat wand.dat |Opera‚ ÄúMagic Wand‚Äù Web credentials
---------------------------------------------------------
inurl:ospfd.conf intext: |OSPF Daemon Passwords
password -sample -test
-tutorial –download
---------------------------------------------------------
index.of passlist |Passlist user credentials
---------------------------------------------------------
inurl:passlist.txt |passlist.txt file user credentials
---------------------------------------------------------
filetype:dat “password.dat” |password.dat files
---------------------------------------------------------
inurl:password.log filetype:log |password.log file reveals usernames,
|passwords,and hostnames
---------------------------------------------------------
filetype:log inurl:”password.log” |password.log files cleartext
|passwords
---------------------------------------------------------
inurl:people.lst filetype:lst |People.lst generic password file
---------------------------------------------------------
intitle:index.of config.php |PHP Configuration File database
|credentials
---------------------------------------------------------
inurl:config.php dbuname dbpass |PHP Configuration File database
|credentials
---------------------------------------------------------
inurl:nuke filetype:sql |PHP-Nuke credentials
---------------------------------------------------------
filetype:conf inurl:psybnc.conf |psyBNC IRC user credentials
“USER.PASS=”
---------------------------------------------------------
filetype:ini ServUDaemon |servU FTP Daemon credentials
---------------------------------------------------------
filetype:conf slapd.conf |slapd configuration files root password
---------------------------------------------------------
inurl:”slapd.conf” intext: |slapd LDAP credentials
”credentials” -manpage
-”Manual Page” -man: -sample
---------------------------------------------------------
inurl:”slapd.conf” intext: |slapd LDAP root password
”rootpw” -manpage
-”Manual Page” -man: -sample
---------------------------------------------------------
filetype:sql “IDENTIFIED BY” –cvs |SQL passwords
---------------------------------------------------------
filetype:sql password |SQL passwords
---------------------------------------------------------
filetype:ini wcx_ftp |Total Commander FTP passwords
---------------------------------------------------------
filetype:netrc password |UNIX .netrc user credentials
---------------------------------------------------------
index.of.etc |UNIX /etc directories contain
|various credential files
---------------------------------------------------------
intitle:”Index of..etc” passwd |UNIX /etc/passwd user credentials
---------------------------------------------------------
intitle:index.of passwd |UNIX /etc/passwd user credentials
passwd.bak
---------------------------------------------------------
intitle:”Index of” pwd.db |UNIX /etc/pwd.db credentials
---------------------------------------------------------
intitle:Index.of etc shadow |UNIX /etc/shadow user credentials
---------------------------------------------------------
intitle:index.of master.passwd |UNIX master.passwd user credentials
---------------------------------------------------------
intitle:”Index of” spwd.db |UNIX spwd.db credentials
passwd -pam.conf
---------------------------------------------------------
filetype:bak inurl:”htaccess| |UNIX various password file backups
passwd|shadow|htusers
---------------------------------------------------------
filetype:inc dbconn |Various database credentials
---------------------------------------------------------
filetype:inc intext:mysql_ |Various database credentials, server names
connect
---------------------------------------------------------
filetype:properties inurl:db |Various database credentials, server names
intext:password
---------------------------------------------------------
inurl:vtund.conf intext:pass –cvs |Virtual Tunnel Daemon passwords
---------------------------------------------------------
inurl:”wvdial.conf” intext: |wdial dialup user credentials
”password”
---------------------------------------------------------
filetype:mdb wwforum |Web Wiz Forums Web credentials
---------------------------------------------------------
“AutoCreate=TRUE password=*” |Website Access Analyzer user passwords
---------------------------------------------------------
filetype:pwl pwl |Windows Password List user credentials
---------------------------------------------------------
filetype:reg reg +intext: |Windows Registry Keys containing user
”defaultusername” intext: |credentials
”defaultpassword”
---------------------------------------------------------
filetype:reg reg +intext: |Windows Registry Keys containing user
”internet account manager” |credentials
---------------------------------------------------------
“index of/” “ws_ftp.ini” |WS_FTP FTP credentials
“parent directory”
---------------------------------------------------------
filetype:ini ws_ftp pwd |WS_FTP FTP user credentials
---------------------------------------------------------
inurl:/wwwboard |wwwboard user credentials
---------------------------------------------------------
mungkin temen2 ada yang ingin melihat password dari website jerman?
mungkin sebaiknya kita juga mengganti kata "password" dengan memakai bahasa jerman tentunya dibawah ini adalah tabel 5 negara beserta terjemahan password dalam bahasa masing2 negara.
-----------------------------------------------------
BAHASA |KATA-KATA| TRANSLATE
-----------------------------------------------------
German |password | Kennwort
Spanish |password | contraseña
French |password | mot de passe
Italian |password | parola d’accesso
Portuguese |password | senha
Dutch |password | Paswoord
-----------------------------------------------------
setelah temen2 banyak mendapatkan password, apa yang akan anda lakukan?jangan berbuat jahat yang pasti, lihat2 saja isinya atau anda terlalu baik dengan memberitahu admin. jangan lupa sediakan john the ripper dirumah, sapa tau password yang disimpan sudah dalam keadaan terenkripsi.

JENIUS = 1% IDE & 99% HARD WORK

Mimpi basah maksudnya apa ya ??

Mengapa orang china menguasai perekonomian

Magic Moment

Sekilas Tentang La Tahzan

150 Tips dan Trik Ampuh untuk windows

Tutorial untuk mempercepat kinerja windows

Tutorial konfigurasi webbrowser mozilla firefox

Memoserv

ChanServ Information

NickServ Options

Nickserv Access Lists

Registrasi NickServ DALnet

2. Bagaimana Cara Mengidentifikasi Nick Anda

Anda diharuskan untuk melakukan identify nick sebelum dapat menggunakan perintah-perintah yang lainnya. Berikut dua buah cara yang biasa dilakukan untuk mengidentifikasi sebuah nick:

5. Mengapa Setting Alamat Email Penting

5.1 Keistimewaan Meregister Nicname Secara Lengkap

Beberapa keistimewaan yang anda dapatkan setelah melakukan autorisasi, yaitu:

Informasi tambahan untuk perintah-perintah tersebut, silahkan kunjungi http://help.dal.net/docs/nickserv.html, ketik /nickserv help ketika berada dalam DALnet, atau kunjungi http://www.dal.net/services.

5.2 Mengirimkan Password Melalui Email

6.1 “ Saya tidak ingin memberikan alamat email saya untuk anda!”

Anda benar sekali. Tetapi, kami ingin menegaskan bahwa DALnet adalah layanan gratis. DALnet tidak mengharuskan anda untuk meregister nick untuk masuk kedalam server kami.

7 · Troubleshooting dan FAQ (Frequently Asked Questions)

Pertanyaan: NickServ memberitahukan saya bahwa kode AUTH tersebut salah. Apa yang harus saya lakukan?

TEKNIK MANUAL BASMI VIRUS BABON

HOW TO HACK YAHOO ID

Hacking Toolbox

Tips dan Trik mendapatkan username dan Password dengan Google

`5. Mengapa Setting Alamat Email Penting`

Informasi tambahan untuk perintah-perintah tersebut, silahkan kunjungi http://help.dal.net/docs/nickserv.html, ketik `/nickserv help` ketika berada dalam DALnet, atau kunjungi http://www.dal.net/services.