JetSwirl : Fuel Saver

JetSwirl Spesification

2008-10-22T00:44:00.004+07:00

PURPOSE :

Jetswirl work to make the mixing fuel and air that occurred in the engine becomes more homogeneous, so burning becomes more perfect.

EFFICIENCY :

Faster acceleration.
Increase power.
Save fuel consumption 20% - 40%, depend on the level of wear and tear/ mechanical compression.
Mechanical temperature more cold 10% - 20%.
Smoother mechanical vibration.
JetSwirl" can be applied to all types of wheeled vehicles-4 and does not require special treatment.

CHARACTERS :

Engine speed (RPM) in the constant uphill road without obstacles.
Ex: When the vehicle to travel with the speed climb 80 km / hour, without adding the gas pedal board, the speed remains 80 km / hour.
Speed will be on the road straight / flat tread without gas pedal.

INSTALATION :

Prepare JetSwirl according to type/brand of car.
Dislodged carburettor (SOHC) or Intake Manipold (DOHC/Diesel).
Connected JetSwirl on the manipold. Use glue Silicon to prevent leakage.
Post back carburettor or Intake Manipold (DOHC/Diesel).
Turn on the engine. Reduce noise from carburettor/filter by adjusting the carburettor air hole until high RPM. Then play again stationer bolts until it cause an idle lap (500-700 RPM).
If a detonation/mechanical limp, check ignition/setting of the valve/spark plugs. In such cases, recommended for tune-up the engine.

On the gasoline engine, the best setting which are marked with spark plugs colour become brown and dispose of exhaust gas containing water (H20). While the diesel engine, it will be a reduction of black smoke from the exhaust.

How to Order

2008-10-22T00:22:00.003+07:00

CALL/SMS :

08562349955
081266609955
021 33052855

About JetSwirl's Inventor

2008-10-22T00:11:00.008+07:00

JetSwirl found by Mr. Ogiek, who is an Indonesian citizen, living in Jogjakarta. He is the owner of Prisma Motor, which moves in the field of Automotive since many years ago. Concerns about the increasingly high prices of fuel for vehicles, Mr. Ogiek to conduct research to create a simple tool that can save fuel consumption. JetSwirl name taken from the working principle of this instrument, the "Jet" and "Swirl". That is where working with the principles of the tools in this will create the impetus causing wind vortex in the ignition point.

JetSwirl ditemukan oleh Bapak Ogiek, seorang warga negara Indonesia yang tinggal di Jogjakarta. Bapak Ogiek merupakan pemilik Prisma Motor, yang telah berpengalaman bergerak di bidang Otomotif sejak bertahun-tahun lalu. Keprihatinan tentang semakin tingginya harga bahan bakar untuk kendaraan, Bapak Ogiek untuk melakukan penelitian untuk membuat alat sederhana namun dengan manfaat yang luar biasa, yang berfungsi untuk menjadikan konsumsi bahan bakar kendaraan menjadi lebih irit. Nama JetSwirl diambil dari prinsip kerja dari alat ini, yaitu "Jet" dan "Swirl", dimana alat ini bekerja berdasarkan prinsip menciptakan dorongan menyebabkan pusaran angin di jalur bensin sehingga akan membuat pembakaran di dalam mesin menjadi lebih sempurna.