Latest hacks and hacking news..

AIRTEL 3G HACK SEPTEMBER 2012 AIRCEL OCTOBER NOVEMBER DECEMBER

2012-10-22T20:12:00.004-07:00

Airtel Aircel Vodafone Docomo Reliance uninor 3g hack September 2012 October 2012 November 2012 December 2012 January 2013 aircel 3g hack september 2012 is now possible with any where who were looking for the latest New Hack Tricks and gprs tricks to hack 3g network of aircel Vodafone airtel docomo reliance and much more operators this is good news for all of them.
SO many people were using hacking tricks for to utilize the great services for free of cost. Here by following the below mentioned link you will directly you will get the aircel airtel 3g new hack trick. Be ready to know the secret.

Actually some of bloggers were misusing this great users by diverting the to fileice.com FILE ICE is a great uploading website which will pays money to the registered users for every download from their account. If you download the filefrom the website mentioned link they will payed from fileice.com.

SO dear friends no tricks is for to airtel 3g hack September 2012 and airtel 3g hack October 2012 airtel 3g hack November 2012 aircel 3g hack September 2012 aircel 3g hack October 2012 aircel 3g hack November 2012. Please understand the truth.

VODAFONE 3G | VODAFONE | FREE VODAFONE 3G HACK | VODAFONE GPRSHACK NOVEMBER 2012

2012-10-22T20:11:00.000-07:00

After Posting my Trick on How to Hack Airtel 3G and Reliance 3g Hack i was getting requests for free 3G on Vodafone, Vodafone has been slightly strict about there GPRS until this hack has been found out.In orderto get Vodafone free 3G,you will have to try out this method I’ve mentioned below exactly.This vodafone hack has been tested on many mobiles and found out to be effective.You can also Use Modded Opera Mini For This Trick.
vodafone-3g
Settings For Vodafone Free GPRS [mobile]
Account Name : Vodafone_gprs
Homepage : http://live.vodafone.in[or anything useful]
User Name: (not required)

Password not required)
Access Point Settings :[ to be configured in mobile,if not already given]
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data
Bearer Settings: [to be setup in mobile]
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name not required)
Password not required)
After configuring these settings in your Vodafone mobile,check for connection.If you are unable to access free internet [GPRS] on your vodafone mobile using this trick,thenswitch off your mobile,reinsert sim card and switch ON again.Now you can browse on your mobile for free.Enjoy…

VODAFONE HACK 2012 FOR FREE GPRS AND RECHARGE TRICK | LATEST VODAFONE HACKING TRICKS

2012-08-30T05:33:00.003-07:00

Hello Friends ! Today i am going to post Two Latest Tricks for Vodafone users.First Trick is Vodafone free 2 GB Internet Pack Trick and Second Trick is get Rs 16 on the Recharge of Rs 10 .

First Trick :

Just Type BONUS 149 and send it to 144 .

You will get Vodafone 2 GB Internet pack free for 1 Month.

This Trick is Tested and 100 % working in Kerala but don’t know about others states, i think its only for kerala. in india.

Second Trick

Just Send RECHARGE<space> Rs 1O Recharge Voucher Code to 144 (Toll Free).
You will get Rs 16 Balance in Rs 10 Recharge. Means Rs 6 Extra

This Trick is working in many states and 100 % confirmed in Madhya Pradesh.

Enjoy

For New Trick Keep Visiting

Vodafone Free Working Gprs Trick Hack-July 2012

2012-08-30T05:32:00.000-07:00

Vodafone Free GPRS Working Trick-July 2012

Hi friends,How are you all,Today i come back with very latest and working trick of Vodafone.Yeah friends today i introduce a trick of Vodafone,This trick working 100% in all states of India ad it's not fake trick.It also tested by me in Delhi.But may be this trick not work in Punjab and some other states.So friends lets come to point,this trick working with proxy trick.This is vodafone 100% free gprs hack trick-July 2012

Connection Name---Vodafone Gprs

Set Apn Address--vodafone

Proxy Address--197.784.47.77

Proy Port--80

Home Page--www.google.com

Now just save the settings and restart mobile phone and surf free Vodafone free gprs trick.That's all for now for more vodafone hack tricks 2012 stay tuned with hackingworld

How to hack ip address

2012-08-30T05:28:00.005-07:00

In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP.

Well I guess its one of the most important must learn manul for boys out there if you want to impress your friends particularly gals whom you’ll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .

In the practical execution of this manual you don’t have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.

What is IP and how to get the IP of a remote system::

Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your IS

P and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim’s computer.

Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:

Address Class Dotted Decimal Notation Ranges

Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx

Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx

Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx

The various classes will be clearer after reading the next few lines.

Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.

In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".

A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as

"24's" and is commonly used by most ISP's.

Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.

Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:

xxx.xxx.zzz.yyy

where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.

***********************

For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?

So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.

This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.

In my country, say there are three main ISP’s:

ISP Name Network Address Allotted

ISP I 203.94.47.xx

ISP II 202.92.12.xx

ISP III 203.91.35.xx

Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.

Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISP’s in the world, could you? If yes please send it to me J.

Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.

Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft’s version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :

Proto Local Address Foreign Address State

TCP abhisek:1031 64.4.xx.xx:80 ESTABLISHED

Now you got the IP address of hotmail ass 64.4.xx.xx .

Similarly you can figure out the IP address of most http or ftp connections.

To know your own IP type the following command in a dos windows

C:\netstat –n

[this commands converts the IP name into IP addresses]

this is what you will probably see on typing the above command :

Proto Local Address Foreign Address State

TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED

TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2

TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT

TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED

TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT

Here 203.xx.251.161 is your IP address.

Now lets clarify the format used by netstat :

Proto : It shows the type of protocol the connection with the remote system is using.

Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.

Local Address : It shows the local address ie the local IP. When the netstat command is executed without –n switch then the name of the local system is displayed and when the netstat is executed with –n switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.

xxx.yyy.zzz.aaa:1024

in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system

Foreign Address :: It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with –n switch then you directly get the IP of the victim but if the netstat is executed without –n switch then you will get the address of the remote system. Something like

C:\netstat

Proto Local Address Foreign Address State

TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED

Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.

Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.

Below I have produced a list of ports and popular services generally found to be running.

21 :: FTP port

80 :: http port

23 :: Telnet port

Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.

Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn’t work for all Trojans].

Netbus :: 12345(TCP)

Subseven :: 27374(TCP)

Girl Friend :: 21554(TCP)

Back Oriface :: 31337 (UDP)

Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you’ll.

How to get the IP of a remote system while chatting through msn messenger ::

This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.

The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.

To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.
You should get a table like this:

Proto Local Address Foreign Address State
TCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED
TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED
TCP kick: ESTABLISHED

The top name in the list is the server's address for IMing. There could be many of
the second name in the list, as a new connection is made to the server for every
room you are IMing to. You are looking for the address of the remote host in
this table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6”.
without the quotation marks.
All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.

Well 50%of the work is done now. Now you know how to get the IP of a remote system, so its time to trace it down and find some details about the IP.

Tracing an IP is quite simple. You can do it the easy way by using some sweet softwares like Visual Trace 6.0b

[ftp://ftp.visualware.com/pub/vr/vr.exe]

Neotrace

[http://www.neoworx.com/download/NTX325.exe]

or by our way ie. Using MS DOS or any other version of DOS.

Well I suggest you to use DOS and its tracert tool for tracing the IP cause using it will give you a clear conception about the art of tracing an IP and I guarantee that you will feel much satisfied on success than using a silly software. Furthur you will know how things work and how the IP is traced down and the different networks associated in this tracing process.

Let us take a look at tracert tool provided for DOS by Microsoft.

It is a very handy tool for peoples need to trace down an IP.

Just open any DOS windows and type tracert.

C:\windows>tracert

Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name

Options:

-d Do not resolve addresses to hostnames.

-h maximum_hops Maximum number of hops to search for target.

-j host-list Loose source route along host-list.

-w timeout Wait timeout milliseconds for each reply.

You will now see a description of the tracert command and the switches associated with it.

Well these switches doesn’t makes much difference. All you can do is to increase the timeout in milliseconds by using –w switch if you are using a slow connection and the –d switch if you wish not resolve address to hostnames by default.

By default tracert performs a maximum of 30 hops trace. Using the –h switch you can specify the number of hops to perform.

Now its time for execution.

Let us trace down the IP yahoo.com [216.115.108.243]

TIP: If you have done a long research (I mean a lot) then simply looking at the IP you can figure out some info from it. For example the IP 203.90.68.8 indicates that the system is in India. In India IPs generally begin with 203 and 202

C:\WINDOWS>tracert yahoo.com

Tracing route to yahoo.com [216.115.108.243] over a maximum of 30 hops:

1 308 ms 142 ms 127 ms 203.94.246.35

2 140 ms 135 ms * 203.94.246.1

3 213 ms 134 ms 132 ms 203.94.255.33

4 134 ms 130 ms 129 ms 203.200.64.29

5 122 ms 135 ms 131 ms 203.200.87.75

6 141 ms 137 ms 121 ms 203.200.87.15

7 143 ms 170 ms 154 ms vsb-delhi-stm1.Bbone.vsnl.net.in [202.54.2.241]

8 565 ms 589 ms 568 ms if-7-0.bb8.NewYork.Teleglobe.net [207.45.198.65]

9 596 ms 584 ms 600 ms if-3-0.core2.NewYork.teleglobe.net [207.45.221.66]

10 * * * Request timed out.

11 703 ms 701 ms 719 ms if-3-0.core2.PaloAlto.Teleglobe.net [64.86.83.205]

12 694 ms 683 ms 681 ms if-6-1.core1.PaloAlto.Teleglobe.net [207.45.202.33]

13 656 ms 677 ms 700 ms ix-5-0.core1.PaloAlto.Teleglobe.net [207.45.196.90]

14 667 ms 673 ms 673 ms ge-1-3-0.msr1.pao.yahoo.com [216.115.100.150]

15 653 ms 673 ms 673 ms vl20.bas1.snv.yahoo.com [216.115.100.225]

16 666 ms 676 ms 674 ms yahoo.com [216.115.108.243]

Trace complete.

Note: Here I have traced yahoo.com. In place of yahoo.com you can give the IP of yahoo or any other IP you want to trace, the result will be the same.

Now carefully looking at the results you can figure out many information about yahoo’s server [216.115.108.243]

First packets of data leave my ISP which is at 203.94.246.35 .Similarly you can find out the different routers through which the packets of data are send and received to and from the target system. Now take a look at the 13th line you’ll see that the router is in PaloAlto.Teleglobe.net from this you can easily figure out that the router is in Palo Alto. Now finally look at the target system ie. Yahoo’s server vl20.bas1.snv.yahoo.com . Now you got the address of yahoo’s server. Now put this address in any IP lookup programe and perform and reverse DNS lookup and you will get most of the info about this address,like the place where it is in.

Well another thing you can find out using the tracert tool is that the number of hops (routers) the target system is away from you. In case of tracerouting yahoo.com we find that the target system ie yahoo’s server is 16 hops away from my system. This indicates that there are 16 routers between my system and yahoo’s server.

Apart from tracing an IP you can find out many usefull details about the target system using the tracert tool.

Firewall Detection

While tracerouting a target system, if you get * as an output then it indicates timeout error. Now if you peform another tracerout to the same taeget system at some other time with a good connection and in this way few times more and if you always get * as the output then take it for sure that the target system is running a firewall which prevents sending of data packets from the target system.

Example

Some days ago I tried to tracert hotmail’s server in plain and simple way using tracert without any trick.This is what I found out :

c:\windows>tracert 64.4.53.7

Tracing route to lc2.law5.hotmail.com [64.4.53.7]

over a maximum of 30 hops:

1 * * * Request timed out.

2 161 ms 147 ms 85 ms 203.90.69.81

3 126 ms 261 ms 219 ms 203.90.66.9

4 121 ms 115 ms 228 ms delswp2.hclinfinet.com [203.90.66.133]

5 727 ms 725 ms 711 ms 203-195-147-250.now-india.net.in [203.195.147.250]

6 1006 ms 794 ms 952 ms core-fae-0-0.now-india.net.in [203.195.147.3]

7 826 ms 731 ms 819 ms 213.232.106.9

8 885 ms 744 ms 930 ms 213.166.3.209

9 851 ms 1020 ms 1080 ms 213.232.64.54

10 1448 ms 765 ms 1114 ms pos8-0.core2.London1.Level3.net [212.113.0.118]

11 748 ms 789 ms 750 ms ge-4-2-1.mp2.London1.Level3.net [212.187.131.146]

12 719 ms 733 ms 846 ms so-3-0-0.mp1.London2.Level3.net [212.187.128.46]

13 775 ms 890 ms 829 ms so-1-0-0.mp2.Weehawken1.Level3.net [212.187.128.138]

14 853 ms 852 ms 823 ms so-3-0-0.mp1.SanJose1.Level3.net [64.159.1.129]

15 889 ms 816 ms 803 ms so-7-0-0.gar1.SanJose1.Level3.net [64.159.1.74]

16 * * * Request timed out.

17 * * * Request timed out.

18 * * * Request timed out.

19 * * * Request timed out.

20 * * * Request timed out.

21 * * * Request timed out.

22 * * * Request timed out.

23 * * * Request timed out.

24 * * * Request timed out.

25 * * * Request timed out.

26 * * * Request timed out.

27 * * * Request timed out.

28 * * * Request timed out.

29 * * * Request timed out.

30 * * * Request timed out.

Trace complete.

I performed the same tracert many times a day but concluded with the same result. This indicates that the systems after the router SanJose1.Level3.net has firewalls installed which prevents the outgoing of data packets.

Detecting Traceroute Attempts on your System

You can detect that an attacker is performing a traceroute on your system, if you see the following symptoms:

1. If you observe port scans on very high UDP ports. This symptom means that the attacker has performed a traceroute on your system. However, it could also mean a simply port scan. Either way, it signifies the fact that your system is being scanned.

2. If the packet-monitoring tool installed in your network, picks up several outgoing TTL-exceeding messages, then it is yet another sign that someone is doing a traceroute on your system.

3. If in these log files, you also observer an outgoing ICMP port unreachable error message, then it means that since a traceroute was done on your system and as the target system i.e. your system, was reached, it responded with this error message.

You can also find our more information on the attacker (if he performs a traceroute on your system) by simply studying the sniffer log files. If you observer the TTL values, then we can easily figure out the following information on the attacker by making use of OS detection techniques discussed earlier in this white paper:

The Operating System running on the attacker’s target system.
Number of hops away, the attacker is from you.

How to hack someone by knowing his IP

2012-08-30T05:27:00.000-07:00

Hi guys. First of all, I want to say that I didn't make this tutorial myself, I found it on Hacking Library
If it's not authorized to post this kinda tutorials here, or if it has already been post, then I'm sorry to say useless things : )
the tutorial looks like that :

Introduction
1. Welcome to the basic NETBIOS document created by aCId_rAIn. This document will teach you some simple things about NETBIOS, what it does, how to use it, how to hack with it, and some other simple DOS commands that will be useful to you in the future. THIS DOCUMENT IS FOR NEWBIEZ ONLY!!! If you are NOT a newbie then don't go any farther reading this because if you're smart enough you probably already know it all. So don't waste yourt time reading something that you already know.

1. Hardware and Firmware

1a. The BIOS
The BIOS, short for Basic Input/Output Services, is the control program of the PC. It is responsible for starting up your computer, transferring control of the system to your operating system, and for handling other low-level functions, such as disk access.
NOTE that the BIOS is not a software program, insofar as it is not purged from memory when you turn off the computer. It's
firmware, which is basically software on a chip.
A convenient little feature that most BIOS manufacturers include is a startup password. This prevents access to the system until you enter the correct password.
If you can get access to the system after the password has been entered, then there are numerous software-based BIOS password extractors available from your local H/P/A/V site.
NETBIOS/NBTSTAT - What does it do?

2. NETBIOS, also known as NBTSTAT is a program run on the Windows system and is used for identifying a remote network or computer for file sharing enabled. We can expoit systems using this method. It may be old but on home pc's sometimes it still works great. You can use it on your friend at home or something. I don't care what you do, but remember, that you are reading this document because you want to learn. So I am going to teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there are two ways, but one's faster.
Method 1:Start>Programs>MSDOS PROMPT>Type NBTSTAT
Method 2:Start>Run>Type Command>Type NBTSTAT
(Note: Please, help your poor soul if that isn't like feeding you with a baby spoon.)
Ok! Now since you're in the DOS command under NBTSTAT, you're probably wondering what all that crap is that's on your screen. These are the commands you may use. I'm only going to give you what you need to know since you are striving to be l33t. Your screen should look like the following:

NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]
[-r] [-R] [-RR] [-s] [-S] [interval] ]
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
-c (cache) Lists NBT's cache of remote [machine] names and their IP addresses
-n (names) Lists local NetBIOS names.
-r (resolved) Lists names resolved by broadcast and via WINS
-R (Reload) Purges and reloads the remote cache name table
-S (Sessions) Lists sessions table with the destination IP addresses
-s (sessions) Lists sessions table converting destination IP addresses to computer NETBIOS names.
-RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refresh
RemoteName Remote host machine name.
IP address Dotted decimal representation of the IP address.
interval Redisplays selected statistics, pausing interval seconds between each display. Press Ctrl+C to stop redisplaying
statistics.
C:\WINDOWS\DESKTOP>
The only two commands that are going to be used and here they are:
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Host Names

3. Now, the -a means that you will type in the HOST NAME of the person's computer that you are trying to access. Just in case you don't have any idea what a Host Name looks like here's an example.
123-fgh-ppp.internet.com
there are many variations of these adresses. For each different address you see there is a new ISP assigned to that computer. look at the difference.
abc-123.internet.com
ghj-789.newnet.com
these are differnet host names as you can see, and, by identifying the last couple words you will be able to tell that these are two computers on two different ISPs. Now, here are two host names on the same ISP but a different located server.
123-fgh-ppp.internet.com
567-cde-ppp.internet.com
IP Addresses
4. You can resolce these host names if you want to the IP address (Internet Protocol)
IP addresses range in different numbers. An IP looks like this:
201.123.101.123
Most times you can tell if a computer is running on a cable connection because of the IP address's numbers. On faster connections, usually the first two numbers are low. here's a cable connection IP.
24.18.18.10
on dialup connections IP's are higher, like this:
208.148.255.255
notice the 208 is higher than the 24 which is the cable connection.
REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.
Some companies make IP addresses like this to fool the hacker into believing it's a dialup, as a hacker would expect something big, like a T3 or an OC-18. Anyway This gives you an idea on IP addresses which you will be using on the nbtstat command.
Getting The IP Through DC (Direct Connection)
5. First. You're going to need to find his IP or host name. Either will work. If you are on mIRC You can get it by typing /whois (nick) ...where (nick) is the persons nickname without parenthesis. you will either get a host name or an IP. copy it down. If you do not get it or you are not using mIRC then you must direct connect to their computer or you may use a sniffer to figure out his IP or host name. It's actually better to do it without the sniffer because most sniffers do not work now-a-days. So you want to establish a direct connection to their computer. OK, what is a direct connection? When you are:
Sending a file to their computer you are directly connected.
AOL INSTANT MESSENGER allows a Direct Connection to the user if accepted.
ICQ when sending a file or a chat request acception allows a direct connection.
Any time you are sending a file. You are directly connected. (Assuming you know the user is not using a proxy server.)
Voice Chatting on Yahoo establishes a direct connection.
If you have none of these programs, either i suggest you get one, get a sniffer, or read this next statement.
If you have any way of sending thema link to your site that enables site traffic statistics, and you can log in, send a link to your site, then check the stats and get the IP of the last visitor. It's a simple and easy method i use. It even fool some smarter hackers, because it catches them off guard. Anyway, once you are directly
connected use either of the two methods i showed you earlier and get into DOS. Type NETSTAT -n. NETSTAT is a program that's name is short for NET STATISTICS. It will show you all computers connected to yours. (This is also helpful if you think you are being hacked by a trojan horse and is on a port that you know such as Sub Seven: 27374.) Your screen should look like this showing the connections to your computer:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 205.188.8.7:26778 ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------
The first line indicated the Protocol (language) that is being used by the two computers.
TCP (Transfer Control Protocol) is being used in this and is most widely used.
Local address shows your IP address, or the IP address of the system you on.
Foreign address shows the address of the computer connected to yours.
State tells you what kind of connection is being made ESTABLISHED - means it will stay connected to you as long as you are on the program or as long as the computer is allowing or is needing the other computers connection to it. CLOSE_WAIT means the connection closes at times and waits until it is needed or you resume connection to be made again. One that isn't on the list is TIME_WAIT which means it is timed. Most Ads that run on AOL are using TIME_WAIT states.
the way you know the person is directly connected to your computer is because of this:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------
Notice the host name is included in the fourth line instead of the IP address on all. This is almost ALWAYS, the other computer that is connected to you. So here, now, you have the host name:
abc-123-ppp.webnet.com
If the host name is not listed and the IP is then it NO PROBLEM because either one works exactly the same. I am using abc-123-ppp.webnet.com host name as an example. Ok so now you have the IP and/or host name of the remote system you want to connect to. Time to hack!
Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok, there's the crap again. Well, now time to try out what you have leanred from this document by testing it on the IP and/or host name of the remote system. Here's the only thing you'll need to know.
IMPORTANT, READ NOW!!!
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Remember this?
Time to use it.
-a will be the host name
-A will be the IP
How do i know this?
Read the Statements following the -a -A commands. It tells you there what each command takes.
So have you found which one you have to use?
GOOD!
Time to start.
Using it to your advantage
6. Type this if you have the host name only.
NBTSTAT -a (In here put in hostname without parenthesis)
Type this is you have the IP address only.
NBTSTAT -A (In here put in IP address without parenthesis)
Now, hit enter and wait. Now Either one of two things came up
1. Host not found
2. Something that looks like this:
--------------------------------------------
NetBIOS Local Name Table
Name Type Status
---------------------------------------------
GMVPS01 <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
GMVPS01 <03> UNIQUE Registered
GMVPS01 <20> UNIQUE Registered
WORKGROUP <1E> GROUP Registered
---------------------------------------------
If the computer responded "Host not found" Then either one of two things are the case:
1. You screwed up the host name.
2. The host is not hackable.
If number one is the case you're in great luck. If two, This system isn't hackable using the NBTSTAT command. So try another system.
If you got the table as above to come up, look at it carefully as i describe to you each part and its purpose.
Name - states the share name of that certain part of the computer
<00>, <03>, <20>, <1E> - Are the Hexidecimal codes giving you the services available on that share name.
Type - Is self-explanatory. It's either turned on, or activated by you, or always on.
Status - Simply states that the share name is working and is activated.
Look above and look for the following line:
GMVPS01 <20> UNIQUE Registered
See it?
GOOD! Now this is important so listen up. The Hexidecimanl code of <20> means that file sharing is enabled on the share name that is on that line with the hex number. So that means GMVPS01 has file sharing enabled. So now you want to hack this. Here's How to do it. (This is the hard part)
LMHOST File
7. There is a file in all Windows systems called LMHOST.sam. We need to simply add the IP into the LMHOST file because LMHOST basically acts as a network, automatically logging you on to it. So go to Start, Find, FIles or Folders. Type in LMHOST and hit enter. when it comes up open it using a text program such as wordpad, but make sure you do not leave the checkmark to "always open files with this extension" on that. Simply go through the LMHOST file until you see the part:
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a

# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
Read this over and over until you understand the way you want your connection to be set. Here's an example of how to add an IP the way I would do it:
#PRE #DOM:255.102.255.102 #INCLUDE
Pre will preload the connection as soon as you log on to the net. DOM is the domain or IP address of the host you are connecting to. INCLUDE will automaticall set you to that file path. In this case as soon as I log on to the net I will get access to 255.102.255.102 on the C:/ drive. The only problem with this is that by doin the NETSTAT command while you are connected, and get the IP of your machine. That's why it only works on simple PC machines. Because people in these days are computer illiterate and have no idea of what these commands can do. They have no idea what NETSTAT is, so you can use that to your advantage. Most PC systems are kind of hard to hack using this method now because they are more secure and can tell when another system is trying to gain access. Also, besure that you (somehow) know whether they are running a firewall or not because it will block the connection to their computer. Most home systems aren't running a firewall, and to make it better, they don't know how operate the firewall, therefore, leaving the hole in the system. To help you out some, it would be a great idea to pick up on some programming languages to show you how the computer reads information and learn some things on TCP/IP (Transfer Control Protocol/Internet Protocol) If you want to find out whether they are running a firewall, simply hop on a Proxy and do a port scan on their IP. You will notice if they are running a firewall because most ports are closed. Either way, you still have a better chance of hacking a home system than hacking Microsoft.
Gaining Access
7. Once you have added this to you LMHOST file. You are basically done. All you need to do is go to:
Start
Find
Computer
Once you get there you simply type the IP address or the host name of the system. When it comes up, simply double click it, and boom! There's a GUI for you so you don't have to use DOS anymore. You can use DOS to do it, but it's more simple and fun this way, so that's the only way i put it. When you open the system you can edit, delete, rename, do anything to any file you wish. I would also delete the command file in C:/ because they may use it if they think someone is in their computer. Or simply delete the shortcut to it. Then here's when the programming comes in handy. Instead of using the NBTSTAT method all the time, you can then program you own trojan on your OWN port number and upload it to the system. Then you will have easier access and you will also have a better GUI, with more features. DO NOT allow more than one connection to the system unless they are on a faster connection. If you are downloading something from their computer and they don't know it and their connection is being slow, they may check their NETSTAT to see what is connected, which will show your IP and make them suspicious. Thats it. All there is to it. Now go out and scan a network or something and find a computer with port 21 or something open.

I think I understood the 1st part and mb I can understand the 2nd, but I will mb need help, and I think this is the good place to ask
I would like to know some things:
If the other guy knows about hack, will trying this method enable him to change things on your computer?
If the guy has some firewall, will it block all?
May this method arm my pc?
Is the risk of being detected and punished important?
Can I stop all links between my pc and my victim's pc after I changed some things?

How to find someones IP address

2012-08-29T07:14:00.000-07:00

Here is next worth for our Visitors. Most of you may be curious to know how to find the IP address of your friend’s computer or to find the IP address of the person with whom you are chatting in Yahoo messenger or Gtalk. Finding out someone's IP address is like finding their phone number, an IP address can be used to find the general location where that person lives. Now while most of the tutorials on the net teach you how to steal an ip address via MSN, or any other chat software, in this post I’ll show you how to find IP address of someones computer using script. Using this method for hacking someones ip adress is very easy and effectively, so just follow the steps bellow.

NOTE: This tutorial is for educational purposes only, I am NOT responsible in any way for how this information is used, use it at your own risk.

How to Hack Someones IP Address ?

Alright, I'm gonna give you this script. Register a Free hosting at Byethost.com and follow the steps.

Code - get.php :

<html>
<?php
$file = "ips.txt";
$f=fopen($file, 'a');
fwrite($f,$_SERVER['REMOTE_ADDR']."\n");
fclose($f);
?>
<p>File not found</p>
</body>
</html>

1.) First of all you need to make a new .txt document on the website you're uploading this to. Name it ips.txt (You can change that in the script aswell where it says $file = 'ips.txt'; in the second line. Then change the CHMOD to 777.

2.) Now you need to past the script above in to a get.php document, and upload it.

3.) Now you make people visit your site, and they will see only " File Not Found " !

4.) To view the IP, you simply add "/ips.txt" after your domain, and you'll see the IP.

Best 5 Ways to Make FREE PC to Phones Calls Worldwide

2012-08-18T07:32:00.003-07:00

Best 5 Ways to Make FREE PC to Phones Calls Worldwide

There are a lot of programs on internet offering “FREE Internet to Phone Calls” but unfortunately most of them are fake! Users are found to be usually confused which of them are real and really FREE to use. Nowadays PC-to-PC phone calls are free, made very convenient and are built in on almost every web chat client. But services offering phone calls free of any cost from PC to real telephone numbers are still very hard to find.

After searching on web almost all those free pc-to-phone call services, I found these 5 the best, FREE and 100% working! If you’re also searching for pc-to-phone free calls services, then I’d suggest you to look no more as these are the only ones so far that are authentic and working. With most of the free pc-to-phone clients, you’re allowed to make calls to very limited number of countries (usually USA and Canada) or with limited time period.

These services are also one of those, all of them have some limitations but no matter what limitations are there, or how it works – it’s FREE!

1. VoipBuster

VoipBuster offers an desktop application to make regular phones in various popular destinations worldwide for FREE. Free calls are limited to number of countries only. See the list of those countries here. When you download the application and signup for new free account, VoipBuster gives you free calls for a total of 60 minutes. During this trial period you can only call the destinations marked as free.

After the trial period, you need to register your account by buying credit in order to extend your free calls. Your credit card will be charged just to register your account permanently. Your calls will still be free of cost in those selected countries. Registered users get max 300 minutes per week of free calls, measured over the last 7 days and per unique IP address.

Interface: Desktop Client

Countries Limit: Selected Countries (see list here)
Free Call Time Limit (before auto disconnection): 60 minutes for FREE
Daily Free calls limit: 60 minutes max.

2. FreeBuzzer

Free Internet Calls to more than 40 Destinations! No download and no registration required! Just enter your Phone Number, the number of the person you wish to call and Freebuzzer will connect both phones absolutely free! Freebuzzer is the smart way to make short and free calls all over the world. You don’t need to download anything, just use your browser to make Free Worldwide Internet Phone Calls!

Interface: Web Client
Countries Limit: 40 Countries
Free Call Time Limit (before auto disconnection): 2 minutes
Daily Free calls limit: 3 calls

3. EvaPhone

EvaPhone is yet another way to make free PC to phone calls. You don’t need to install anything or even register for an account. Just open the site, enter your number and make the free call. Good thing is you can make free calls to nearly all major countries worldwide but the bad thing is the calls are allowed for a very short period of time. You’re allowed to talk for 10 seconds to 1 minute only (depending on the location). A video advertisement is shown to you in order to make free call. As soon as your call in connected, a countdown timer starts ticking the time so you can know how much time is left before the call is disconnected. Also you’re limited to just two calls per day.

Interface: Web Client
Countries Limit: Almost all countries
Free Call Time Limit (before auto disconnection): 10seconds – 1 minute
Daily Free calls limit: 2 Calls

4. Google Voice

With Google Voice, you can make free phone calls, free PC to phone calls (via Google Talk browser plugin) right from your gmail inbox. With Google Voice, you can also get free SMS, make a free conference call, and get free voice mail services. Free phone calls with Google Voice are limited to three hours. However, you can continue to make free calls as long as you can.

Free calls you make with Google Voice must be to numbers in the United States or Canada. Calls made to countries other than these two will be charged with a very low amount of money.

Interface: Web Client
Countries Limit: USA and Canada only
Free Call Time Limit (before auto disconnection): 3 hours
Daily Free calls limit: Unlimited

5. iCall

iCall is another free option to make free calls. It offers you both web interface and a desktop application forWindows, Mac OS X, and Linux and iPhone. Free calls can be availed in only US and Canada. You will hear an advertisement before each for about 10 seconds. After that your call will be connected instantly which lasts long only for 5 minutes. Yes, you need to reconnect after every five minutes but you can call the number back again as many times as you want.

Interface: Desktop Client
Countries Limit: USA and Canada only
Free Call Time Limit (before auto disconnection): 5 minutes
Daily Free calls limit: Unlimited

Best 5 Ways to Make FREE PC to Phones Calls Worldwide

2012-08-18T07:30:00.001-07:00

Best 5 Ways to Make FREE PC to Phones Calls Worldwide

These services are also one of those, all of them have some limitations but no matter what limitations are there, or how it works – it’s FREE!

1. VoipBuster

Interface: Desktop Client

Countries Limit: Selected Countries (see list here)
Free Call Time Limit (before auto disconnection): 60 minutes for FREE
Daily Free calls limit: 60 minutes max.

2. FreeBuzzer

Interface: Web Client
Countries Limit: 40 Countries
Free Call Time Limit (before auto disconnection): 2 minutes
Daily Free calls limit: 3 calls

3. EvaPhone

EvaPhone is yet another way to make free PC to phone calls. You don’t need to install anything or even register for an account. Just open the site, enter your number and make the free call. Good thing is you can make free calls to nearly all major countries worldwide but the bad thing is the calls are allowed for a very short period of time. You’re allowed to talk for 10 seconds to 1 minute only (depending on the location). A video advertisement is shown to you in order to make free call. As soon as your call in connected, a countdown timer starts ticking the time so you can know how much time is left before the call is disconnected. Also you’re limited to just two calls per day.

Interface: Web Client
Countries Limit: Almost all countries
Free Call Time Limit (before auto disconnection): 10seconds – 1 minute
Daily Free calls limit: 2 Calls

4. Google Voice

Free calls you make with Google Voice must be to numbers in the United States or Canada. Calls made to countries other than these two will be charged with a very low amount of money.

Interface: Web Client
Countries Limit: USA and Canada only
Free Call Time Limit (before auto disconnection): 3 hours
Daily Free calls limit: Unlimited

5. iCall

Interface: Desktop Client
Countries Limit: USA and Canada only
Free Call Time Limit (before auto disconnection): 5 minutes
Daily Free calls limit: Unlimited

License Key of Avira Internet Security 2012 Valid up to 9/11/2013

2012-08-17T09:27:00.000-07:00

Avira Internet Security 2012 is a well known product and is in full demand .Today we are providing you the License key of This important software .Using this key ,you would be able to register this product upto 9/11/2013 .

Avira Internet Security 2012 Key Features:

AntiSpam filtersout unwanted and phishing emails.
AntiPhishing protects you against identity theft attacks.
AntiAd/Spyware shuts out online spies and annoying pop-ups
Rootkit Protection keeps you safe from hidden malware that conventional antivirus can’t find.
FireWall adds an extra layer of defense against intrusions.
Web Protection stops you from landing on malicious websites.
AntiDrive-by blocks unwanted software downloads while you surf.

First of all Download Avira Internet Security 2012 from the below given link :

Download the License File from the below given link

Now Install the Avira Internet Security 2012 .You will see following message form

click on "hbdev.key" link which is shown in above figure. A browse file window will open .
Now choose the key file which ,i had already provided .
Enjoy ! .Your software will be registered up to 9/11/2013
Let's see the below picture which shows registered product.

Enjoy using your antivirus and thus save your money .Please comment if you liked our post or if you are finding any difficulty in using this software.

FREE CALLS WORLD WIDE NO REGISTRATION(BUT TIME LIMIT)

2012-08-15T06:30:00.001-07:00

FREE CALLS WORLD WIDE NO REGISTRATION
TO CALL goto this site
http://www.e-freesms.com/calls.php
NOTE : IT wont work in mobileweb browse
r since flash player support is needed foraudio transfer and applet torun, time limit for India:29 seconds for othher countriesplease see the site
If you need to make morethan two call try getting new IP by disconnecting and connectinginternet also clearing web cookies for the site.
Share u r commends

FREE CALLING TRICK TO WORLWIDE ONLY 6MIN

2012-08-15T06:28:00.001-07:00

FREE CALLING TRICK TO WORLWIDE ONLY 6MIN
FREE CALL= GO TO THIS LINK
http://freecallbutton.com/callback/trigger.htm open karne k baad free callpin parclick karna or no. Ka first code ko yaad rakhna fir backkarke 91 la
ga kar apna mobile no. Daalna fir click karna tumhare mobile par ekcall aayegi fir wahi pin dalna to vo bolegi thankyou fir 0091 laga kar apna jispe phone karna h wo no. Dalna fir # daal dena tumhari call free jayegi 6min tak
Share u r commends

ANDROID FREE CALLING 48MINONE TIME

2012-08-15T06:27:00.003-07:00

ANDROID FREE CALLING TRICK
1.open market
2.search globaltalk
3.downlod n install
4.open app
5.without doing anythig just by opening app u will rewrded free 48min for india
3G net is required.
STEPS:-
1.open market
2.search kallone donload n open
3.register on it

4.u will get 0.02Euro
5.this is for 2:45 seç call in india.
6.register again by changing email address and username.
7.for registering in short time like 1min is for two account can be registerd.
METHOD FOR REGISTER:-
1.at register page on kalloneuse username simple as u canwith 1,2,3,4.....suffix like my username is hacking1 second hacking2 like this, this will help u to remember your account easly.
2.password should be same all time very easy to remember n also time save when u switch ur new accoutin apps.
3.email go and register a big on email at gmail like 26 charecters.
why this--u know very well google gmail can be used by adding dot between email charecters. so if u have longemail address u can make many accout through this.
4.register and activate ur email.
5.open kallone and in settingenter username and pass.
6.switching accout wirhin 10sec--- when u talk a buddy for 2:45sec call will drop in that case go quickelyin setting and change username its done call again.remember pass is same for every register account.
7.call again for 2:45sec
and do unlimited account andcall.
Share u r commends

ENJOY FREE CALL FOR 25MIN WEB CALL..

2012-08-15T06:26:00.002-07:00

GET FREE CALL
Hey Guys Now I m Share This Trick With You
Now You Can Make 25 min Free Call In Worldwide
JUST GO TO
Click here https://mini.vyke.com/

Click On above link then register your mobile number then you will receive two message confirm your account then click on 'vyke assit call' then enter your number in 1st box in 2nd boxput which number which number you want to call. Then you will receive a call in1st box number you will attend this call.then 2nd boxnumber get a call.Now your call is connected
you can use it on mobile and pc.
Share u r commends

CALL WITH FAKE NUMBER....

2012-08-15T06:25:00.003-07:00

CALL WITH FAKE NUMBER
hey now you can call any onewith any callerid but dont use it as wrong purpuse justvisit http://www.crazycall.net and do call.but call rate is sohigh..
Share u r commends

10MILLION MIN FREE CALL...........!!!

2012-08-15T06:24:00.002-07:00

10 Million Minutes Free call,All Over the World(Except Gulf countries)
http://tamilmini.net/Freecall

Share u r commends

NEW CALLING TRICK FOR INDIA!!!

2012-08-15T06:16:00.004-07:00

New calling trick for india. Just visit http://jaxtr.comnow register tis site
1>now go to option make a call 2>enter ur no. 3>enter ur frnd no. 4.>click call now watwil happen now ur phone will ring pick it up. Wait few seconds then u wil be conectur frnd. U will find 16 mint 4 call.
Share u r commends

PENNYTEL CALLING FREE FROM DATA.

2012-08-15T06:15:00.000-07:00

Download handler ucweb or opera for Airtel/Reliance/Docomo from our Best TricksZone.
Here r the steps:
First register here with ur email id.
http://promotions.pennytel.com/xpromo/website_landing.html
Then Check ur mail for id andpasword.
Using Handler application(ucweb or opera or any) Go to
http://www.pennytel.com/m
Sign in with your id and pasword given in your mail.
It wil show,
"Balance : $0.00"
But NO PROBLEM guys.
Just enter
"From" - which cell u want tomake the CALLER
"To" - whom u want to accept the call
here it comes
.
.
.
U r connecte via "call-back method"
That's it.
Share u r commends

VLC MEDIA PLAYER OFFLINE INSTALLER VERSION 1.1.9

2012-08-15T06:12:00.002-07:00

Here is the offline installer version of media player vlc version 1.1.9.

if you want it you may download it from there link:

http://adf.ly/2LHtO
OR
http://ity.im/0i66o

HOW TO ZOOM IMAGE IN FACEBOOK.

2012-08-15T06:10:00.004-07:00

Today i'm gonna tell u trick how to zoom image in Facebook with help on Chrome extension. but this trick only supported Google chrome.

For chrome Extension: Click here or click here

For Google chrome: click here

HOW TO DOWNLOAD YOUTUBE VIDEO AS A MP3 FROM YOUTUBE WITHIN 2 SEC.

2012-08-15T06:08:00.005-07:00

Hi GuYs,

Want to download a Youtube song as Mp3 in 2 sec from Youtube.
1st search a video song you need to download as Mp3.
2nd copy the Video file Url from Url web bar.
3rd go to http://www.youtube-mp3.org/ and then paste the Url and convert. now your file is ready for download.

if you want to install addons on Google chrome or Firefox click below link.

For Google chrome:- CLICK HERE

For Mozilla Firefox:- CLICK HERE

2012-08-07T00:09:00.001-07:00

Hello Friend After My Superb post

AIRCEL Free GPRS Hacking Trick 2012

Our Team Kestometik Will tell you about Aircel Free Latest GPRS Trick april 2012 or Aircel Free 3G Internet Trick 2012 . This Aircel Free Gprs trick 2012 April or Aircel 3G Gprs Trick For april-2012 will help you to browse free aircel gprs or this free 3g hacking trick for aircel 3g hacking is works now .Here free aicel hacking tricks is given so you can feel ultimate surfing and downloading in aircel 3g network

ok Lets begin :

You Have to edit you aircelgprs setting:->

Setting name-AircelGprs
apn-aircelwap
IP address-10.4.42.15
proxy server address-010.004.042.015
proxy port-8080
hp-www.google.com

Now you want ucbrowser8.0 after install this browser goto setting-accespoint-select AircelGprs and Enjoy free internet on your mobile this trick tested on nokia n70,n73,c6-00,c6-01,c7,n8.

Note-try at low balance 1rs

Note: All the tricks/hacks shared are making use of the loop holes in Aircel’s network. None of these tricks/hacks have been discovered/made/influenced by me. Please use them at your own risk.

BSNL 3G GPRS FREE PROXY ! GPRS FREE BSNL JUL 2012 TRICK

2012-07-14T19:42:00.001-07:00

free gprs bsnl,how to free bsnl gprs,how to hack bsnl gprs,3g gprs free,3g gprs proxy 2012,jul gprs trick,new update gprs tricks,2g 3g free gprs tricks,bsnl tricks jul 2012,free internet bsnl gprs,wap free bsnl,bsnl net apn free

All Bsnl users new working 3G connection launched by bharathi india Bsnl cellone connection available in prepaid card also so i examined many test with Bsnl accessing free 3G internet connection in both mobile and pc and found new trick by changing the 3G connection settings initially have an 3G sim and activated

GPRS or 3G connection should be activated in your mobile also supported

using this new following connection for free

Name :3G free(any)

Service Type 1 WAP

Gateway IP : 1 10.100.3.2

Port no : 1 : 9209.

Timeout: NEVER

CSD No.1

User Name1: ppp

Password1: ppp123

APN setting:

wapwest.cellone.in

User Name : ppp

Password : ppp123

now save it leave the other settings as default and using this activated settings hack bsnl 3G for free new 2012 trick in bsnl mobile free for 3mbps speed browsing and downloading in bsnl 3G.

AIRTEL 3G GPRS FREE ACCESS PROXY TRICKS JUL 2012

2012-07-14T19:40:00.003-07:00

free airtel gprs tricks ,how to free airtel gprs tricks, new airtel gprs tricks,jul airtel gprs trick,how to free gprs use trick,airtel 3g free gprs access proxy,airtel ip port ,free gprs apn,airtel apn,mo free gprs

Hello all my Friends, in this post i am telling you about the airtel 3g hack or free gprs internet trick. by using this airtel 3g hack trick you can access fastest internet on your mobile and 3g data card provided byairtel 3g service. i think this is best trick on the internet. if you are searching for airtel 3g hackthen you are at right place.

Follow The some simple steps for airtel 3g hack :-

First You Download this opera mini handler
Open the browser(opera)
In proxy type put “real host”
In proxy field,type “m.twitter.com”
site-http://www.nok10.com/
That’s all. Just initialize it and enjoy super fast net with .. That's It

Aircel Free 3G Internet Trick 2012 | Aircel Free Gprs trick 2012 April | Aircel Free Latest GPRS Trick april 2012 | Aircel 3G Gprs Trick For april-2012 |

2012-07-09T08:00:00.000-07:00

Hello Friend After My Superb post

AIRCEL Free GPRS Hacking Trick 2012

ok Lets begin :

You Have to edit you aircelgprs setting:->

Setting name-AircelGprs

apn-aircelwap

IP address-10.4.42.15

proxy server address-010.004.042.015

proxy port-8080

hp-www.google.com

Now you want ucbrowser8.0 after install this browser goto setting-accespoint-select AircelGprs and Enjoy free internet on your mobile this trick tested on nokia n70,n73,c6-00,c6-01,c7,n8.

Note-try at low balance 1rs

Note: All the tricks/hacks shared are making use of the loop holes in Aircel’s network. None of these tricks/hacks have been discovered/made/influenced by me. Please use them at your own risk.