Unlock For Us

CB: DC Motor Controller

noreply@blogger.com (Unknown) — Sun, 11 Oct 2026 09:09:15 +0800

The circuit supplies the DC motor in two ways – forward and reverse polarity. This makes the motor spin in forward motion and reverse. From the computer side the circuit can be program in output of 1 0 (Forward) and 0 1 (Reverse). The circuit has idle condition of 0 0 output.

H-Bridge Design:

CODE

Forward à Out 888, 1

Reverse à Out 888, 2

Stop à Out 888, 0

ENJOY!

Start Stop Charging Technology with Set and Reset

noreply@blogger.com (Unknown) — Sun, 11 Oct 2026 07:38:58 +0800

This is an old design and I dont know if still currently in use.

Hope this Helps!!!

CB Zero: Managing Current through Wires

noreply@blogger.com (Unknown) — Sun, 11 Oct 2026 02:23:43 +0800

Trying to study Solar Panel Technology? We can observe that TB melts depends on time and day. How to manage charging at higher Current is easy. Heres How.

- Just Parallel the diodes, now 2A... instead of ANY.

GREAT!

METRO RAIL TECHNOLOGY USING CODEBASE (CB)

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 20:40:07 +0800

Uses Socket Technology and IP Infrastructure like Internet, Local and Wide Area Networks to Monitor Start and Stop of Trains. Each station has a switch on the rails or laser sensors to monitor trains arriving. The signal will be thrown to the main server for further reading and analysis.

Thanks in Advance!

CB Nation: Understanding True Transistor

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 19:58:09 +0800

Every circuit has its equivalent. A transistor can be drawn as shown. This technology will help you uncover all the secrets in electronics like “everything is just a switch”. If you input 0.7v or 0.55v in actual usage, a switch inside the semiconductor switches. Conduction occurs.

The very first “true” transistor: As shown, discovered by us.

GREAT!

CB Router

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 16:44:52 +0800

Heres a way to use adhoc technology and dotNet to create your own router. Its working:

1. Using this application

2. Setting up manually, heres the article.

How to configure Windows Firewall, Wired and Wireless Network using command prompt

GREAT!

Enabling Graphics Acceleration Processor

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 13:07:16 +0800

Heres a way to enable your Laptop GPU at windows.

Dowload and execute the registry file.

Hope this helps!

CB One: Giant Clock

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 12:10:15 +0800

Heres how to create clock circuit, the easy way using Codebase IO Implementation.

Network: Use Winsock or sockets...

Code: VB.NET or C#

Note: Use Auto Data not Rata

ENJOY!

CB Zero: DC UPS

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 11:30:59 +0800

UPS or uninterruptable power supply only work for AC. why? you can do it easily. just Parallel the supply, it will do the work easily and backup just fine. I want a circuit for economy or business! Heres how.

ENJOY!

CB Zero: Voltage Cleaner

noreply@blogger.com (Unknown) — Sat, 10 Oct 2026 10:25:56 +0800

Switching ON slowly lets noise signals fall down and disappear. its very clean. Its jus a time delay design. I created this module last time and sold it for Ten dollars or 500 peso.

Anti-Voltage Transients

Thats it! Have Fun!

CB One: DC Fuse Monitoring

noreply@blogger.com (Unknown) — Fri, 9 Oct 2026 20:09:04 +0800

This is an update or fix for dc fuse monitoring schematic around the world.

If compared, input ground (ON) to pin 10 of parallel port can be done for monitoring.

Enjoy!

CB Zero: Mains Control Diagram

noreply@blogger.com (Unknown) — Fri, 9 Oct 2026 15:14:42 +0800

Heres a way to update MCBs and make it PB.

Thats it!!!

CB Three: One PB and Four Switches

noreply@blogger.com (Unknown) — Fri, 9 Oct 2026 09:00:30 +0800

A quick way to explain how and why some modern appliances uses Push Button instead of old Switch.

Enjoy!

CB One: Any by Three Encoder

noreply@blogger.com (Unknown) — Fri, 9 Oct 2026 03:05:44 +0800

Creating Complex Task and reading data reaching thousands or millions? Here you are A computer, scanning for input.

ENJOY!!!

CB One: Introduction

noreply@blogger.com (Unknown) — Fri, 9 Oct 2026 02:55:14 +0800

When Logic and Hardware is not complete... It means you just need to code it (vb.net or C#) instead of logic circuitry and schematic.

BINARY INPUT (BI)

Binary input is an input ground technology that means ON is ground. If you input ground to the computer, there’s a communication that says this Pin status is “ON”.

Easy way to check the entire pins from the computer: Inp(address)

BINARY INPUT (BO)

Binary output is the output side of CodeBase One e.g. lamps, LEDs and Relays. It is an analogy that you can use to understand binary systems. Being “ON” means the computer wants the lamp or LED to be on (state of 1) and “OFF” means at 0 state.

For example as shown above, in binary systems we can read the output status to be 1 1 0 0 1 or 25 in decimal value.

In computer, if we want see the output to be in that condition:

Out address, 25

Which means lamp 0, 3 and 4 are ON. Out 888, 25 (Parallel port)

List of Transistors October of 2026

noreply@blogger.com (Unknown) — Thu, 8 Oct 2026 22:12:09 +0800

Transistor Table as of October 8, 2026

Name	Configuration	Collector Current	Top Feature
BC337	cbe	500-800mA	Availability
ED1402	CBE	200mA
ED1702	cbe	500mA
TIP31C	bce	3A	Switching
TIP33C	bce	10A	10A
TIP35C	bce	25A	Ic maximum
TIP29C	bce	1A	Switching
TIP3055C	bce	15A

CB ZERO: Multivoltages

noreply@blogger.com (Unknown) — Thu, 8 Oct 2026 21:46:43 +0800

Hello there guys, this is an update from the book at your colleges. I put a transistor, study the schematic carefully, you can crack it up.

HOPE THIS HELPS!

HEP CB Zero: Variable Power Supply Basics

noreply@blogger.com (Unknown) — Thu, 8 Oct 2026 19:54:18 +0800

Heres the basics of Adjustable Power Supply, Not the Best but potentionally great. LM317 doesn't work easily nowadays and no formula derivation...

Notice: Burning due to Power of Potentiometer, try rheostat...Add Transistor will help, any Current for the Load, ANY.

HOPE THIS HELPS!!!

CB Zero: Electronic Toggle Switch

noreply@blogger.com (Unknown) — Wed, 7 Oct 2026 19:56:27 +0800

Heres a figure version of toggle switch, not electrical, mechanical:

THANKS US IN THE FUTURE. ENJOY!!!

WinBubble 3.0 was released

noreply@blogger.com (Unknown) — Wed, 7 Oct 2026 17:25:34 +0800

Customized and Tweak Windows easily... Targeted to thousands of tweaks, tools, tips, and tricks. In just two clicks, WinBubble was designed to be more user-friendly tweaking tool.

Download 1 Download 2 Download 3

Download 4

Download 5

ENJOY TWEAKING!!!

How to go to System Properties easily

noreply@blogger.com (Unknown) — Wed, 7 Oct 2026 02:25:53 +0800

When you right-click the Computer Icon and you cant see Properties menu, heres a command prompt or Run Window option.

1. Press Win+R

2. Type the following and press enter:

= sysdm.cpl

= control system

= control /name Microsoft.System

Thats it! Hope this helps...

HEP CB: VOLTAGE DIVIDER DERIVATION (Vout)

noreply@blogger.com (Unknown) — Mon, 5 Oct 2026 16:49:49 +0800

Resistor - two‑terminal electronic component that provides electrical resistance measured in ohms. Heres some of the core topic of the function based component.

VOLTAGE DIVIDER DERIVATION

Sum of voltage = zero

+Vin - I1 (R1) - I2 (R2) = 0

Vtotal = I(R1+R2)

nothing follows...

Another:

Itotal = I1 [resistor one]+ I2 [resistor two]

Since I1 = I2 = Itotal

and by ohms law:

Itotal = I2

Vin/(R1 +R2) = Vout/R2

since Vout is needed...

Vout = Vin (R2)/(R1 +R2)

THATS IT! ENJOY!

HEP CB TIP: Using X/2 if needed

noreply@blogger.com (Unknown) — Mon, 5 Oct 2026 14:40:45 +0800

You have 24V Power Supply and you need 12V by design. Not the Best but easy way to do this.

Note: 7812 can be use also. it depends on the project cost.THATS IT! ENJOY!

HEP ORIGINAL

noreply@blogger.com (Unknown) — Sun, 4 Oct 2026 01:47:29 +0800

New Found Glory... Handmade Electronic Products (HEP) FOR EVERYONE. HERE and soon at Naga City.

Table based Electronics or Rb Technology

noreply@blogger.com (Unknown) — Fri, 2 Oct 2026 21:24:25 +0800

At books in the future:

Rb = 4.3/Ib

Rb = 11.3/Ib

Lets check and Learn to design Rb at Fire Alarm:

Lets design the Control Panel, Inside and Out.

Remote LED Indicator = 2.2 volts

by table:

12v 1k 2.2v(led)

6v 500ohms(led)

5v 330ohms(led)

By table, Rb = 100 Ohms..

Hfe = Beta/10

Hfe, use multimeter function NPN cbe or bce

Beta = 300

Ic = Vcc/Rc = Beta x Ib

+24-IbRb-0.7 = 0

Rb = 23.3/Ib

from Vcc/Rc = Beta x Ib

24/400/300=Ib

Ib = 0.0002A

Rb = 116.500 ohms

Rb = 100 Ohms, OK (lesser)

NOTE: add latch for Alarm Bell

Thats it!

Unlock For Us

CB: DC Motor Controller

Start Stop Charging Technology with Set and Reset

CB Zero: Managing Current through Wires

METRO RAIL TECHNOLOGY USING CODEBASE (CB)

CB Nation: Understanding True Transistor

CB Router

Internet Connection Sharing to Several Computers using Windows

How to configure Windows Firewall, Wired and Wireless Network using command prompt

Enabling Graphics Acceleration Processor

CB One: Giant Clock

CB Zero: DC UPS

CB Zero: Voltage Cleaner

CB One: DC Fuse Monitoring

CB Zero: Mains Control Diagram

CB Three: One PB and Four Switches

CB One: Any by Three Encoder

CB One: Introduction

List of Transistors October of 2026

Transistor Table as of October 8, 2026

CB ZERO: Multivoltages

HEP CB Zero: Variable Power Supply Basics

CB Zero: Electronic Toggle Switch

WinBubble 3.0 was released

How to go to System Properties easily

HEP CB: VOLTAGE DIVIDER DERIVATION (Vout)

HEP CB TIP: Using X/2 if needed

HEP ORIGINAL

Table based Electronics or Rb Technology