learning3dmax

3D Jeep CJ7 Special for learning3dmax.blogspot.com visitor... New Year Editions 2016

2015-12-28T22:39:00.000+07:00

Hi.... Learning3dmax.blogspot.com visitor

Today, I upload the real 3D modelling version of Jeep CJ7, thanks to your comment to rebuild it to the real Jeep CJ7 Modelling, and for the too much request for this modelling I will Give You BIG SALE, for Christmas and for welcome new year 2016,

I share it for you just 100$ (negotiate), you can contact me:

BBM: 2BA1E823
Facebook: https://www.facebook.com/alexsilalahimmm
email : alexinternetbanking@gmail.com

note :If you are not from Indonesia, you can make payment by bitcoin wallet.
My Address bitcoin : 1D3KFbrR5VpkyMTYC54qYU77pY5JcvgvTg

Huawei Welcome to The World, New Year Editions !!

2015-12-20T13:55:00.005+07:00

Hi Guys, today I create new 3d object was created by me, I share it for you just 100$ (negotiate), you can contact me:
BBM: 2BA1E823
Facebook: https://www.facebook.com/alexsilalahimmm
email : alexinternetbanking@gmail.com

note :If you are not from Indonesia, you can make payment by bitcoin wallet.
My Address bitcoin : 1D3KFbrR5VpkyMTYC54qYU77pY5JcvgvTg

Sale of car design 3D Jeep CJ Toys, Special Chrismast Toys Edition

2015-12-14T21:13:00.004+07:00

Free download the sample museum modelling

2012-03-18T16:11:00.004+07:00

Click here to download the source file !!!

Free download Modelling Bank Indonesia Semarang !!

2012-01-10T01:08:00.005+07:00

everyone can download this modelling for free.
remember: do not sell this modelling.
use it for study increase your modelling skill.

click here to download.
if you are running low version of 3dmax 2011, you can not open the file.

How to make chocolate in 3d max 2011 software ??

2011-11-21T20:26:00.019+07:00

1. open you 3d max program, and go to goemetry and click box.

2. insert the value of the box, go to modify and insert the value of Length is 131.993 cm, width is 163.55 cm and Height is 20.841 cm.

3. right click to the box, choose Convert to Editable Poly like at the picture.

4. press f3 shortcut to make the object can be transparant like at the picture, and the click edges and you must make any selections like at the picture.

5. click connect button.

6. do it again until the position of any edges like at the picture. use your mind.

7. press polygon icon and select the poly and the click extrude button. use your filling when you extrude the selected.

8. click vertex icon and make any selection of the vertex like at the picture.

9. click edges icon, select the any edges like at the picture and click connect.

10. in this step exactly like step 4-6.

11. chocolate has many part and long to the behind. click polygon icon, select the one polygon like at the picture and delete it by pressing delete button on your keyboard.

12. and next we must set the position of the pivot. click Hieararchy button and click snaps tonggle (look step 16), make sure that you put the pivot like at picture.

13. after you make the position of the pivot appropriate, go to modifier list and choose Symmetry, select mirror Axis is Y.

14. right click on the Symmetry and choose Collapse All and click Ok.

15. click Polygon icon and select the polygon like at the picture and delete it by using delete button on your keyboard.

16. and next we must set the position of the pivot. click Hieararchy button and click snaps tonggle, make sure that you put the pivot like at picture.

17. after you make the position of the pivot appropriate, go to modifier list and choose Symmetry, select mirror Axis is X and checklist the Flip.

18. right click on the Symmetry and choose Collapse All and click Ok.

19. do it with previous step (15-17).

20. the final step, go to modifierlist and choose TurboSmooth, and insert the value of Iterations is 2.

click here to download the source file !!!
Note: I suggest you to open this file by using 3dmax 2011 version.

How to make a lipstick modelling with 3d max 2011 ??

2011-10-15T17:10:00.006+07:00

1. Open your 3d max software, and go to geometry and click Box button.

2. to edit the box you have created, go to modify and insert the value of Length is 175.0, Width is 175.0, and Height is 600.0.

3. right click to the box and convert to Editable Poly.

4. Click edge button.

5. Did you know to make object could be transparent ? just hit the F3/F4 on your keyboard and select any edges like at the picture and click connect.

6. click the Polygon icon and select any polygons like at the picture and click Detach button and click ok and move it.

7.look at the picture carefully and click border icon then click into the border of the box that we have detached and then click cap button.

8. copy the object that we have created by pressing shift button on your keyboard and move it by using Move and Selection tools and then a new window will appear, that is Clone Options and click Ok.

9. convert it to the Editable Poly and i am sure that you can stack the box like at the picture. I suggest you to edit it from the top viewport.

10. and then copy it again like the step I have shown to you before.

11. Move the vertex carefully like at the picture. make sure that the vertex you want to move should be like a lipstick. I mean the Proportion.

12. select the edges like at the picture and click connect.

13. i want to make you simple with this modelling, if you want to make the lid of the lipstick, just copy the box that you have created.

14. in this modelling I want to make with low polygon but the final result like be a modelling with high polygon. How to make this ? look at carefully to the picture, select the edges and click connect, move the edge like the left position of the picture.

15. the next trick is a TurboSmooth from the modifier list.

16. Insert the value of iterations is 2.

17. Go to modifier again, and choose Shell, then insert the value of Inner Amount is 2.0 and insert the value of Outer Amount is 3.0, and then choose TurboSmooth again and insert the value of Iterations is 2.

Free download the source file.
Click here !!!

If you are running in the low version of 3d max 2011, you can not to open the file.

Free download box_switch in 3d max 2011

2011-09-17T16:47:00.004+07:00

This time, I do not tell how to make this modelling. but I just share the file just for you !!!!

For free !!!!

I suggest to you to use 3dmax 2011 version and vray 2.0. if you are running at the lower version of 3d max 2011, you can not to open the file.

click here to get the file !!!

Free download sony stick modelling in 3d max !!

2011-09-17T16:01:00.003+07:00

Free download Nokia 7610 Charger Modelling !!

2011-09-16T16:31:00.004+07:00

This time, I do not tell how to make this modelling. but I just share the file just for you !!!!

For free !!!!

I suggest to you to use 3dmax 2011 version. if you are running at the lower version of 3d max 2011, you can not to open the file.

Download here !!!

How to make a modelling Pantene shampoo bottle ??

2011-09-13T20:42:00.008+07:00

1. open your 3dmax software, and go to Geometry and click box.

2. if you want to edit the box, go to modify and insert the value of Lenght is 122.357, the value of Width is 30.162, the value of height is 29.024.

3. and now, right click to the box, and choose convert to Editable Poly like at the picture.

4. select one Polygon like at the picture and delete it.

5. you should add some vertex and edge, and you must make it like at the picture.

6. after you have finished, go to modify and choose Symmetry and select "z" option. Make sure the position of your pivot is center the object.

7. go to modify again, and choose TurboSmooth, and insert the value of Iterations is 3.

8. we will make a lid of the shampoo bottle. go to geometry and select Cylinder.

9. Edit it from modify and insert the value of Radius is 21.274, the value of Height is 10.256, height segments is 5, cap segments is 1 and sides is 18.

10. go to modify and choose TurboSmooth and insert the value of Iterations is 3.

Click here to download the source file !!

How to make a deck chair in 3d max 2011 ???

2011-09-05T08:58:00.007+07:00

1. open your 3d max software and go to shape and click Line Button.

2. create the line like at the picture (you must create seven of vertex).

3. we will add the vertex, and click Create Line button.

4. look at the picture carefully, create new line like the picture that I have shown to you.

5. now, select the vertex like at the picture and insert the value of Fillet is 6 and press enter.

6. now, select the vertex like at the picture and insert the value of Fillet is 7 and press enter.

7. after you have done step 6, you will look the vertex is not be at one with another vertex like at the picture, how to fix it ? select the vertex (the number 1) and click Fuse button, (the number 2) this step are the same like the number 1.

8. checklist the Enable In Renderer, and Enable In Viewport and insert the value of Thickness is 3.

9. I am sure that you can make another spline like at the picture, but I will tell you how to describe it. You can copy it and delete some vertex and move it by using Select and Move Button.

10. next, go to shapes and click Line button.

11. create the position of line like at the picture.

12. after you have done, insert the value of Outline is -1.0 and press enter.

13. go to modify and choose Extrude and insert the value of amount is 70.5 (depend the position of your vertex).

14. Finished

Click here to download the source file !!!
Note: if you are running the low version of auto 3d max 2011, you can not to open the source file.

How to make the Ice Cream in 3d max 2011 ??

2011-08-11T16:57:00.006+07:00

hi guys, I am sorry about this tutorial, because the image that I have been indicated to you are not true from this tutorial, because i make this tutorial for the people who beginners about 3d max.

1. open your 3d max software, go to the shapes and click star button.

2. edit it from the modify and insert the value of Radius 1 is 27.162, Radius 2 is 21. 494, and point is 10 like at the picture.

3. and now, go to shapes and click Helix button.

4. you must make the star like at the picture, go to modify and insert the value of Radius 1 is 87.925, Radius 2 is 0.0, height is -170.498, Turns is 7.493, Bias is -0.04.

5. let's do this step carefully, go to modify and choose BavelProfile and click Pick Profile button and click to the star you have created.

6. and now, we will make a cone for base place of the ice cream. go to geometry and click Cylinder Button.

7. go to modify and insert the value of Radius is 128.678, Height is -188.217, Height segments is 5, cap segments is 1 and sides is 18.

8. convert the cylinder to the editable poly.

9. click the vertex button and to make it like at the picture, use the Select and Move, Select and Rotate and Select and Uniform Scale.

10. After you have make the Cylinder like be a cone, now we will make the cone could be smooth, click the Cylinder and click TurboSmooth. And insert the value of Iterations is 2.

11. now, the last step, click the helix and go to modifier and choose TurboSmooth and insert the value of iterations is 2.

click here to download the source file !!!!
note: if you are running from the low version of 3d max 2011, you can not open the source file.

How to make a hat in 3d max ??

2011-07-31T19:04:00.007+07:00

1. open your 3d max software, choose Geometry and click
Cylinder button.

2. to make you easy create the Cylinder from the top view port and if you want to edit it, go to modify and insert the value of Radius is 30.457, height is 57.354, height segments is 5, cap segments is 1, sides is 18.

3. convert the cylinder to the Editable Poly.

4. select some vertex like at the picture.

5. scale the vertex you have selected using Select and Uniform Scale, like at the picture.

6. sorry friend, I forgot to put the next tutorial, but i will guide you to know. in the 5 tutorial, after you have scale the vertex, select some polygon and extrude it, how to extrude ?? you will know in the 11 tutorial, just see it and back again to the 6 tutorial,like at the picture.

7. look this step carefully, we will add some edges, for what ?? to make good editing when we are using FFD modifier, select some edges like at the picture, click connect and insert the value is 2 like at the picture.

8. go to modifier and choose FFD(box).

9. Click the Set Number of Points button and insert the value of Length is 9, Width is 9, Height is 9.

10. if you are using the FFD(box), do not forget to unselect all of vertex, edge, polygon, etc. Just click ControlPoints and move the vertex of FFD(box) by using Select and Move like at the picture.

11. From the perspective view port, rotate the object. Now, select the bottom polygon and click inset and extrude the polygon like at the picture.

12. this is the last step, go to modify and choose TurboSmooth, and insert the value of Iterations is 2.

Click here to download the source file !!!

How to make a windows 7 logo in 3d max ??

2011-07-29T04:36:00.006+07:00

1. open your 3dmax software, and go to geometry and click the Box button.

2. to make you easy, create the box from the top view port, if you want to edit the box, go to modify and insert the value of Length is 60.0, Width is 60.0, Height 2,5. Length Segs is 25, Width Segs is 25, Height segs is 3.

3. convert the box to editable poly.

4. we will make each the box corner could be smooth. click the vertex icon, select the vertex one by one side like at the picture, and move it use Select and Uniform Scale tool.

5. you must select the top vertex and the bottom vertex like at the picture, and to move it use Select and Uniform Scale tool.

6. because we have made many of vertex, we will make
it easy to move, go to modify and choose FFD (box).

7. Click Set Number of Points button, insert the value of Length is 15, Width is 15, Height is 4, and the click OK.

8. you can edit the box which we have created from the front view port (by press the letter F on your keyboard). to edit it, you can use Select and Move tool and I order you to make it like at the picture.

note: if you want to use FFD, do not select any vertex, polygon, edge, etc. but click the Editable Poly and click the FFD and then Control Point.

9. if you have made the position of vertex like the step
eight, go to modify and choose TurboSmooth.

10. you can see the result of the TurboSmooth effect from the Perspective viewport, and we will copy it, look at the picture click the mirror button and select yz, Clone Selection is Copy.

11. put straight the box you have created by using Select and Move tool like at the picture.

12. the last step, we will copy it, from the top view port, select all the object and hold the Shift button, move it by using Select and Move button and the window of copy will appear, select copy and click OK.

Click here to download the source file !!!

How to make a picture frame ???

2011-07-13T15:30:00.004+07:00

1. Open your 3d max software, go to shapes and click
rectangle.

2. to edit the rectangle, go to modify and insert the
value of Length is 65.0, width is 85.0, corner radius 0.0

3. and now, we will make a frame through the Star. go to
shapes, and click Star button like at the picture.

4. you can set the wide and set the pentagon of the star.
go to modify and insert the value like the red box marker
like at in the picture above.

5.okay, select the rectangle, go to modify and select
Bevel Profile.

6. the last step is click Pick Profile button and then
click to the Star 01 like at the picture. Finished !!

Click here to download the source file !!!

How to make a waving flag in 3d max 2010 ?

2011-06-28T14:17:00.005+07:00

1. open your 3d max software and go to geometry and click Plane button.

2. to make you easy, create the plane from the top view port, and to edit it, go to modify
and insert the value of lenght is 50 cm and width is 100 cm, Lenght segs is 40 and width
segs is 40.

3. next, we will make a pole of the flag, go to geometry and click Cylinder button.

4. to edit the pole, go to modify and insert the value of radius is 1.865 cm and height 136.749 cm like at the picture.

5. in the our real world, the flag should be down to the ground, how to make it ?? go to Space Warps and click Gravity button. I suggest you to make it from the top view port, like
at the picture.

6. and to make it like be a waving flag, go to pace warps and click wind button,
create it from the top view port and insert the value of strenght is 25.0, decay, 0.0,
turbulance 15.0, frequency 0.0, scale 1.0 like at the picture I have shown to you.

7. click the plane object and go to modify and click cloth. it is will make an effect like
waving.

8. look carefully the picture, first click the + sign cloth and click group, second make
some selection of vertex (only one row to down), third click Make Group button and rename
it become indonesia flag and then click ok.

9. look carefully the picture again, first click indonesia flag in the box white, second
click Node button and third click to the pole that you have created.

10. ok little relax yourself, click the plane and go to modify, click cloth and then click
Cloth Forces and select all Gravity01 and wind 01 in the Forces in Scene form click >
button, and it is will be move to the Forces in Simulation form.

11. we will through five steps. first, click Object Properties button, second click plane01,
third check the cloth option, fourth select the cotton in the Presets list, and the last
step fifth click ok.

12. If you want to look the real preview of the flag, click Simulate Local button or
Simulate Local button.

Click here to download the source file !!!

note: I used the 3d max 2010 and if you are running in the before version of 3d max, you can not to open the file you have downloaded.

How to make an apple with 3d max software ???

2011-06-12T13:50:00.006+07:00

1.open your 3d max software, go to shapes and click helix button. And create it from the front
view port.

2.to edit the helix, go to modify and insert the value of radius 1: 4.76, radius 2: 96.098, height: -49.062, turns 1.0, bias 0.0

3.go to shapes and click circle button

4. to edit the circle go to modify, and insert the value of radius is 36.279

5. go to modify and choose BavelProfile. Bevel Profile function to create objects 2
Dimension 3 Dimension into objects by using object form two other dimensions as its
constituent.

6.before you click Pick Profile button, click the circle button first and click Pick Profile
button and click to the helix object.

7. after you do it, select the helix, insert the value of radius 1, radius 2, height, turns, bias
like at the picture.

8. and the last step, we will make an apple effect could be real by using turbosmooth, click
an apple object and go to modify and choose TurboSmooth and insert the value of iterations is 2 like at picture.

click here to download the source file !!!

how to join 3dobject with a photo ??

2011-06-06T15:55:00.004+07:00

1. before we begin with 3d max object, first we must insert the background of the environment. ok let is we start. open your 3d max software and go to rendering and click environment.

2. in the tab of Common Parameters, click none button and click bitmap, select the picture you have downloaded.

3. we will make a base of teapot object, go to geometry and click box button.

4. you can edit the box by insert the value of length, width, height from modify.

5. and now go to geometry and click teapot.

6. to edit the teapot go to modify and insert the value of radius is 20.616 and segments is 46.

7. next step, make a material for the box, press M button from your keyboard and click standard button and choose Matte/Shadow. This function like make the box could be transparent and max the shadow of the teapot fall to the box.

8.Drag it into the box like at the picture.

9. to make the effect become real? click lights and click omni button. you can set the position of the omni you want. But I suggest you to put it to the top of teapot.

10. Do not forget to checklist the shadows to on.

click here to download the source file !!!!

How to make a neon effect with 3d max software ??

2011-06-06T14:55:00.006+07:00

1. I used 3dmax 2010 version, if you are running of the low version, you can not to open the file you had downloaded. ok next let is we begin to create it. Open your 3d max software, go to shapes and click text button, like at the picture.

2. type the text you want, and if you want to edit the size, kerning and leading, you can change it from the modify like at the picture.

3. next step, go to modify and click extrude, insert the value of amount is 22.86cm like at the picture.

4. we will make an identity of the object, go to edit and click object properties, insert the value of Object Id is 3, which the box red marked.

5. next, go to rendering and click effect.

6. click add button and choose Lens Effect and click ok.

7. look carefully, we start from the left tutorial, click glow and click the right arrow, scroll down and you will see Glow Element, insert the value of size is 0,15, intensity is 90,0 and change the color of radial color become green. Now we go to next tab. it is effect, insert the value of Object ID is 3, and do not forget to give a checklist. the last step is click render button.

click here to download the source file !!!

How to make a pencil with 3dmax software ??

2011-05-18T01:52:00.003+07:00

1. Open your 3dmax software, and next go to
create and select geometry and click Cylinder.

2. I recommend to you to create the cylinder from
the left view port and to edit it like at the
picture, go to modify and insert the value of
Radius is 15 cm, Height is 300 cm and sides is 8.

3. Next step we will make the top of the cylinder
become a cone. Right click to the cylinder and
select to convert to and choose convert to
editable poly like at the picture.

4. Click vertex, and make selection some of vertex like at the picture and click collapse (it is make an effect like a cone or another mean any vertex of you have selected could be join).

5. After you do it, click edge and select some edge like at the picture (it is to make it become 2 path) and finish.
I colored it with the material.

Click here to download the source file !!!!!

How to make a grass effect with 3dmax 2011

2011-05-06T15:58:00.005+07:00

1. open your 3dmax software and select geometry and click Plane Button.

2. create the plane, from the view port you want and go to modify and insert

the value of length and width like at the picture.

3. I think you should change the color of your plane, I suggest you to use

Chocolate Color and click Ok.

4. ok, now we will make the grass effect, go to modify and select Hair and

Fur (WSM).

5. the color of grass is green, and you can change it from Material

Parameters. Like at the picture. if want to make hair effect, you can do it

like this tutorial and just change the color from Material Parameters become

black. And the result step is render it.

I make the source file from 3dmax 2010 64 bit, if you run it from the low version you can not to run it.
Click here to download the source file....

How to make an effect like bonfire in 3d max ?

2011-04-20T00:33:00.005+07:00

1. open your 3d max software, I think you should
make the wood like at the picture by yourself
and if you have a lot of 3d object like text or
anything, you may to use it. and after opened the
file did you had, Click Helpers.

2. And choose Atmospheric Apparatus.

3. Click SphereGizmo and you can create it from
everywhere viewport position. You can Scale the
object by click Select and Uniform Scale. oh,

sorry I forgot to checklist Hemisphere in the
picture, so I suggest you to click it, to make it
half of circle.

4. Okay, go to modify and insert the value of

Radius, I suggest you to insert the value more

than 53,407 cm.

5. Scroll down you mouse and you will see
Atmospheres and Effects and click Add button,
next do next step again like at the picture.

6. Click Fire Effect and click Setup button, so
next scroll down you mouse, inside the tab of
Fire Effect Parameters you will find Flame Size,
Flame Detail, Density and Samples. You can fill
how much the value of it whatever you want. and
the end of this tutorial, click render button,
you will see the flame effect. In my picture, I
just added some trees to make real environment.

Click here to download the source file !!! I have made this from 3d max 2010.
if you used the low version, you can not to open this file.

How to make a ball with 3d max software ????

2011-04-12T23:41:00.004+07:00

1. Open your 3dmax software and go to Geometry

and choose Extended Primitives.

2. Click on Hedra

3. I suggest you, to make a Hedra from

Perspective Viewport.

4. next, go to Modify and Check Dodec.

5. insert the value of Family Parameters and

Radius, like at the picture.

6. now, right click to the Hedra and Convert to

Editable Poly.

7. ok, click Edge icon, and select all the Edge.

8. Scroll down your mouse and you will see

Extrude and click it, look the value you should

fill like at the picture.

9. next, click Polygon icon, select all the

Polygon, scroll down you mouse and click

Tessellate button, fill the value like at the

picture, click apply first and click ok.

10. go to Modify and choose Spherify.

11. and the last tutorial go to Modify and choose

Mesh Smooth, and insert the value of iteration is 2.

Click here to download the source file !!!!!!!

How to make a soap dishes in 3dmax 2010 ????

2011-03-22T17:50:00.009+07:00

1. open your 3dmax software and click create, select geometry and click Cylinder.

2. to make you easy create the object, I suggest you to make it from the top viewport.

3. insert the value of radius, height, height segments, cap segments and sides like at the picture and to make the cylinder become thin, edit it use select and uniform scale.

4. right click to the cylinder and select convert to and click convert to editable poly.

5. click polygon icon and select only the top of cylinder like at the picture.

6. scroll down your mouse and you will see extrude button and click it.
Click apply until the extrude you want.

7. first, you should make any selection to any vertex and go to modify, choose vertex and you should check the soft selection, insert the value of falloff.

8. Now, we will make a line to the bottom of the lid by using chamfer, and add the line and edit it by using select and Uniform Scale.

9. Make selection to all vertex, Check in the tab of Subdivision Surface like at the picture, check the button of Use NURMS Subdivision then insert the value of Iterations, and the object has finished.

Download the source file Click Here !!!!