tag:blogger.com,1999:blog-322147152024-12-19T08:46:14.950+05:30Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.comBlogger12125tag:blogger.com,1999:blog-32214715.post-58961680119387246792010-10-03T01:46:00.001+05:302010-10-03T01:48:25.046+05:30

Past many nights, I spend playing with scripts and USB configuration to connect my ZTE data-card on Linux and results were disappointing.... But the Good News is: I finally got it work and surprisingly without working on any script.Well solution is very very simple and here it is........run YaSTAuthenticate as root In Network Devices select ModemIn Modem Configuraion Overview click AddIn Modem

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com1tag:blogger.com,1999:blog-32214715.post-2655718605006194332010-09-17T07:57:00.000+05:302010-09-17T08:03:19.704+05:30

GRUB is very important since it is the first software program that runs when the computer startsand we have to secure it as much as possible to avoid any possible problem. Below is a default GRUB configuration file and security I recommend you to apply. The text in bold are the parts of the configuration file that must be customized and adjusted to satisfy our needs.Edit the grub.conf

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-42559392163216641152010-09-06T18:46:00.000+05:302010-09-06T19:08:19.055+05:30

Tar is commonly used for packaging files on Linux. Tar uses many command-line options like following: -f    To use a tarfile -c   To create a new tarfile -x   To extract files from a tarfile. You also can compress the resulting tarfile via two methods. -j    To use bzip2-z    To use gzip You can tar up a directory and all of its

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-90167866408918645322010-09-01T17:30:00.001+05:302010-09-05T13:29:20.034+05:30

In case of dual OS, if u install windows (with pre-installed fedora), the boot loader will be lost and fedora become inaccessible. You can recover your Fedora by the following method: Enter ur first CD of fedora core, reboot it. Type linux rescue Then on shell type chroot /mnt/sysimage grub-install /dev/XXX (choose XXX=sda or hda or hdb as per ur system ) Reboot your Syatem To know what is XXX

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-8734605331285789702010-08-31T20:51:00.003+05:302010-09-05T13:23:33.995+05:30

You are connected through proxy server which asks for authentication (i.e. username & password). In this case you have to make some configuration to work with YUM. So simply follow these instructions: open your terminal as root and type: #gedit .bashrc hit Enter you can use vim, emac instead of gedit. Type the following at the end of file: export http_proxy="http://username:pw@

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-31182249225353940732010-08-31T19:47:00.001+05:302010-09-05T13:33:36.251+05:30

You want to increase your allocated swap memory and you don't want to do it permanently by Re-Partition or Re-Installation. Don't Worry!!! Your solution is here: Insure that you have sufficient free disk space. Now suppose you need to increase SWAP by, say, 500Mb. Open ur terminal switch to admin. (use su followed by admin password) and use the following commands # dd if=/dev/zero if=/home/

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-58909756521494240532010-08-30T20:09:00.001+05:302010-09-05T13:01:25.268+05:30

Prerequisites A user account should exist on the remote machine. The RPM packages vnc-server and vnc should be installed on the remote machine and your workstation respectively. Setting up the server I assume that we have setup a remote user account, named "leopard" and we want to start an X session through VNC for this user. In Fedora Core or Red Hat based distros in general, all we have to

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-92195743729137223592010-08-30T20:08:00.004+05:302010-09-05T13:18:08.975+05:30

User Configuration There is one more thing that needs to be done on the remote machine. User leopard’s vnc password needs to be set. So, as user leopard give the command:# vncpasswdWe are prompted for a password. This is the password that we will use when we connect to leopard’s vnc server instance. This password is in /home/leopard/.vnc/passwd. Start the VNC server After the initial

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-90609899236456070792010-08-30T20:05:00.001+05:302010-09-05T13:07:26.629+05:30

The VNC server, apart from letting us control a remote machine using a graphical interface, it serves as a way to start graphical applications on boot. For example, I want my favourite p2p program, amule, to start on boot. So, I add this to the /home/leopard/.vnc/xstartup script. This is how my xstartup file looks like:xsetroot -solid grey vncconfig -iconic & xterm -geometry

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-61943260769339856162010-08-30T07:09:00.000+05:302010-08-31T18:55:54.620+05:30

Assuming that you have Grub boot loader (common in most of the Linux Distros.) To change ur default boot option, do as follows: Open terminal, then type the following codes(don't type $ or #, it will appear by itself) $ su enter ur admin password.. # cd /boot/grub  (you will enter in to grub directory, there is a file named grub.conf. You have to edit it in some editor like Vim or Gedit, im

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com0tag:blogger.com,1999:blog-32214715.post-1155400811696215812010-08-28T21:37:00.000+05:302010-08-31T09:18:33.947+05:30

Hello friends! Here we are going to see how we share files on LAN with Samba. 1. Goto System > Administration > Server Settings > Samba 2. Enter your root password in a popped 'Query' window( to gain root privilege) 3. Preferences > Server settings > Basic you have two things now. Work group & Description fill Workgroup with your workgroup name and

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com2tag:blogger.com,1999:blog-32214715.post-1154761695350233902010-08-27T16:45:00.000+05:302010-08-31T09:21:39.387+05:30

Well this is a basic topic on allowing NTFS file access inside Fedora Core. NTFS is a file system used on Windows 2000, and Windows XP mainly. If you wish to access the data on these drives whilst inside Linux, firstly you need to install a module that is the ntfs.ko. This allows the kernel to read the NTFS partitions. Then u will need to locate and download the right RPM (FC users) for your

Kuldeep Singhhttp://www.blogger.com/profile/05836249143769433433noreply@blogger.com1