MOTO4U

[HowTo]Upgrade your Motorola Razr XT910 To Official Jellybean

2013-07-01T17:05:00.000+05:30

we know Motorola didnt updated Razr XT910 In asia.so if u wanted to install jellybean on your xt910 please follow the tutorial mentioned below

Make sure that you are charged Razr More than 80% .
1)Backup everything you want stored on internal storage like pictures music videos msgs
2)Make sure that you are installed latest Motorola usb drivers
3)Download RSD Lite 6.14
4)Download this Firmware HERE
5)Power off your Phone and press power and hold Volume up and Volume down and then select AP fastboot and then connect to pc via usb
6)Flash the downloaded file through RSD Lite 6.14
after finishing flashing
7:)Download this Jellybean Update from Here
8)Copy the update file to your sd card and rename it as Update.zip

power of your phone and press power and hold Volume up and Volume down and then select Recovery
u should see a dead android guy and the hold both v+ and v- u will be entered into receovery mode than wipe cache and wipe factory reset and then select apply update from sd card.

##Warning:Im not responisble for bricking or damaging your device :)
Congrats!now your razr running on Jellybean

if any hit me up in comments

[HowTo]Upgrade Your Razr XT910 To Official Jellybean

2013-07-01T16:57:00.001+05:30

MOTO4U: [HowTo]Restore Your Stock ICS Firmware On Atrix HD...

2012-12-04T10:53:00.001+05:30

MOTO4U: [HowTo]Restore Your Stock ICS Firmware On Atrix HD...: Bricked Your Atrix HD While Changing Roms. in case you are bricked your Atrix HD Then follow the instructions Below to Make your Atrix HD W...

[HowTo]Restore Your Stock ICS Firmware On Atrix HD

2012-12-04T10:51:00.002+05:30

Bricked Your Atrix HD While Changing Roms. in case you are bricked your Atrix HD Then follow the instructions Below to Make your Atrix HD Working again.

Requirements
1)RSDLITE Latest Version
2)ATRIX HD
3)USB DRIVERS
4)Little Of Patience

Download The SBF From HERE

You need Motorola Drivers for your PC to recognize your cell phone, download and install it for windows 32bit / 64 bit OS.
Download and install up to date RDSLite software, the latest version is v5.7 catch it here.
Grab and save the sbf/xml/zip file to your PC, make sure the file was made for your device.
Charge your battery and pick USB data cable.
Run RSD Lite on your computer, press the ‘…’ button then find and choose the file you have saved in third step, if you download a compressed file you will notice the ‘Unzipping’ window appears, choose ‘Uncompress Only’ button. You’ll see the file information in the ‘File Properties’, make sure your phone model match with your device.

Take your phone and enter fastboot mode by turn off your device first, then press and hold down three buttons at the same time: volume up + volume down + power button, after which the phone will be turn on to the “Boot Mode Selection Menu’.
Connect the USB cable to the phone and press volume down to scroll down to ‘AP Fastboot’ and press the volume up to select it, and you’ll switch to ‘AP FastBoot Flash Mode (S)’, at the bottom of the screen make sure ‘Transfer Mode:’ is ‘USB Connected’.
Back to RSD Lite, then click the ‘Start’ to start the flashing process, see the flashing process and wait for about 12-20 minutes. After the completion, status on the RSD Lite flash will ‘reboot’ and your phone will reboot automatically and updating the files.
Done. If the whole process goes well, your phone will boot normally.

Warning:Im not responsible For Bricking your Atrix HD

[HowTo]Manual Install Official Jellybean on Your Droid Razr M

2012-11-16T00:20:00.001+05:30

Download The Official Jellybean OTA From HERE

Rename "Update.zip"
Place in root of sdcard "/mnt/external1/"
Reboot into recovery
-Shutdown
-Press Volume-Up and Power simultaneously until Motorola logo appears
-Press Volume-Up and Volume-Down simultaneously when you see the android with the ! from his open chest
-Scroll down to and select "Apply Update from External Storage"
-Scroll to and select "Update.zip"

once you upgraded to jellybean u can't roll back to ICS

** Warning im not responsible For Bricking your Phone**

For Example please watch Atrix HD jellybean installation guide below

[HOWTO]Root Your Atrix HD With Simple Steps

2012-11-16T00:14:00.002+05:30

First Download This

Instructions:

1. Download and extract the entire zip file.

2. Ensure your device is connected via USB and that you have installed the latest ADB drivers from Motorola.

3. Double-click "run.bat" and FOLLOW THE INSTRUCTIONS. The exploit will ask you to press a button combination at one point.

[HowTo]Install Leaked JellyBean on Your Atrix HD

2012-11-16T00:11:00.001+05:30

To Install Leaked Jelly Bean Official Update on Your Atrix HD. Please follow the below instructions Carefully.

STEP 1 Download JellyBean 4.1 leak and save to SD card - http://www.sendspace.com/file/etujfp (Thanks Huatz84)

Step 2: Boot phone into recovery by holding power + volume up. Once you see the dead android guy, click both volume buttons at the same time.

Step 3: Apply update from SD card, select the Blur_Version.77.12.22.MB886.ATT.en.US.zip which is 4.1 leak, and apply the update

if u still in confusion please watch the below video thank you

if any please comment i"ll get back asap

**warning im not responsible for bricking your phone****

[ROM][CM10] Moto Ice Gun Edition V2.02

2012-11-16T00:05:00.001+05:30

FEATURES::::::::

Based on Quarx CM10
Beats Audio by Dr. Dre
BraviaEngine Mod
Kickass Kernelizer
new camera app UI
Battery optimation
Internet Speed Tweak
Defrag Database Tweak
Zipalign Tweak
RAM Script Tweak
SD-Card Speedfix
**** The Log Tweak
We Hate Normal Sleeper Tweak
Battery Save Tweak
new UI in settings-app
other UI changes
realistic battery lifetime up to 2 days @ normale usage
panorama-mode (camera)
App2SD
weather widget on Lockscreen
Fingerprint = MB 526
Google Play Store + Google Apps (optional)
Google Play Music
Android 4.2 Lockscreen Clock-Font
Android 4.2 Clock-Widget
Android 4.2 Clock (Alarm/Countdown/Stoppuhr)
Android 4.2 Camera
Android 4.2 Gallery
Android 4.2 Keyboard (incl. a swype-related function)
Android 4.2 Sounds
smooth and fast ROM
and much more
DOWNLOAD

Installation:

- go recovery
- flash MIG + gapps
- Fullwipe + wipe dalvik cache
- reboot
- check in bootmenu, if 2nd-boot is activated
(- set CPU settings to 16/300 - 32/600 - 42/800 - 62/1200 for best experience)
- charge your battery overnight and wipe batterystats in recovery

Credits to Defy@1.1Ghz XDA

How To Update Your Defy XT535 To ICS

2012-08-28T10:55:00.000+05:30

The Motorola Defy XT535 Got Official to install this on Manual way please follow the detailed instructions Below :)

Here is the flashing method procedure for android 4.0.4 chinese version in Motorola Defy XT535

1. Download the android 4.0.4 sbf file From HERE

2. Switch off your mobile then press and hold down the volume up and volume down with power key. Now your device will go in to recovery mode

3. Do a factory recet/ wipe data

4. Clear the cache

5. Power off again

6. Then go to bootloader mode by holding volume up and power key.

7. Connect your mobile with pc via data cable and open motorola rsd lite

8. flash the sbf file with rsd lite

9. After flashing the first boot take some time, so please wait

10. The phone will start in chinese language

11. change it to english in the settings menu

I think you already done the above procedure

Everything is fine. The only problem is there is no google related apps like play store, gmail, g talk etc.

Right ?

then follow me

Before that you need to root your device to get the google apps

1. Download the rooting package for motorola defy xt ( the link is available in first post of this thread)

2. Install SUT LR from the package

3. The SUT LR is mostly working in 32 bit windows PC, If you have 64 bit OS then try it wiht another system

4. Connect Motorola Defy XT to PC/Laptop

5. windows will detect the device, wait until windows finish install the driver.

6. Run SUT LR1.8.2 software update tool

7. Select FXX_PR3_NV.xml in the software update tool when asking make sure the
NvDefinition.xml file should also located in the same folder

8. click Next.The device will auto reboot after driver installation and rom patching complete. remove the phone from PC/laptop

9. Boot in normal mode

10. Go to menu > Settings > Applications > Developer

11. Check USB Debugging (enable)

12. Connect the phone to PC/laptop

14. Dont root it with super one click

15. Download the below package to root

www.mediafire.com/?t884ytrvoghb9gx

16. extract the package and open the root file

17. The device will reboot three times when the rooting process

18. After that the command window shows press any key

19. Press any key and remove your phone from the pc

20. Check if super user is installed

Now you successfully rooted your device

To install Google apps follow the procedure

1. Install root explorer (search in google for the root explorer apk)

2. download the Gapps package below

www.mediafire.com/?13xv3am4557vl92

3. extract this zip file and copy all its 21 contents to system/apps in your device with root explorer through mount r/w

4. with root explorer change the file permission for these 21 files by the following method

5. Press and hold on the file and select permissions from the pop up menu

check the boxes as shown in the image

6. Repeat the permissions for all the 21 Google apps you pasted in the system folder

7. Reboot your device and have fun

A New Blog For Motorola

2012-07-31T15:45:00.001+05:30

For Exclusive News About Motorola Please Make sure to Visit www.motorolaindia.in only dedicated for Motorola india.thank you all

admin

[HowTo]Root Your Defy+

2012-07-22T18:51:00.002+05:30

The following steps worked on Motorolla Defy Plus running Gingerbread 2.3.6. With this method you will need to log into Windows. In this case the device was rooted on Windows 7 Home Premium, Service Pack 1, 64 Bit.

On your phone Step 1:

Go into Settings, Applications.
Activate Unknown Sources.
Go into Settings, Applications, Development.
Activate USB debugging.

On your PC Step 1:

Install an ADB driver. The 64 Bit version was used. The 32 Bit versions is available here.
Make sure the ADB driver is up to date.
Install DooMLoRD's Easy Rooting Toolkit. Version 4 was used, which uses the zergRush exploit.

On your phone Step 2:

Connect your phone via USB to your PC.
Ensure your phone's USB connection is set to Windows Media Sync. This can be done by pulling down theNotification Bar at the top of the screen and selecting USB Connection.

On your PC Step 2:

Run the Easy Rooting Toolkit batch file and follow the instructions.

[DEFY+]Rom HTC Sense Based on CM7.2

2012-06-17T15:40:00.001+05:30

Bench Mark Score

How to Install:

1. Download the .zip

2. Extract the zip and put the folder called "clockworkmod" on the root of ur sdcard.

On ur phone

3. Boot to custom recovery

4. wipe data/factory reset

5. wipe cache partition

6. wipe Delvik cache (from advanced)

7. go to "Backup and restore"

8. chose restore (system & data)

9. chose "2012-06-16.19.46.34/"

10. reboot system now

Change-log:

1. Removed unneeded apps

2. Installed LP_Sense_UI-1.0

3. Changed the bootanimation to HTC beats

(It needs resizements and if any one has the HTC boot without the beats I want it please)so I need help in this part PLEASE

4. Used NTNEXUS theme

5. Added system tuner pro

Download Sense Rom

Sense LockScreen

[DEFY ROM] GingerSpeed v 1.0

2012-05-24T20:19:00.002+05:30

Important Features

FEATURES:

Based on Ms2Ginger v4.0 (Kernel 4.3.109-dpp)

Support for 720p playing and recording

Multilanguage

Busybox Run-parts

Ubuntu Fonts

mmcfix integrated

v6 Supercharger integrated

Bravia Engine integrated

Beats Audio Mod integrated

SmoothScroll Mod integrated

Integrated new Governors (BOOSTEDassv2, smartassv2)

Go launcher EX

KickAssKernelizer integrated

3g TurboScript Integrated

Enabled Hardware Acceleration by default

Lag Free Tweaks

Download link HERE

Installation Of This Rom

1. Copy the content of the zip at clockwormod/backup

2. Reboot your device in BootMenu/ClockWork

3. Go to "Recovery"

4. Go to "Latest or Stable or Custom Recovery"

5. "wipe data and cache"

6. Go to "Backup and Restore"

7. Go to "Advance Restore"

8. Select "GingerSpeed"

9. Restore images, one by one, in this SPECIFIC ORDER:

system

boot

devtree

recovery

10. reboot and enjoy!

Credits To espaciosalter20@XDA

Defy CM9 Latest Nightly's

2012-05-19T22:51:00.000+05:30

16th May Build HERE By Epsylon Defy Build
11th May Build HERE By Quarx Defy + Build Defy With GB Kernel
16th May Build HERE By Epsylon Defy + Build

[CWM-APP]Aroma FileManager

2012-05-14T22:54:00.002+05:30

DOWNLOAD\

Thanks To Amarrullz@XDA

[CM9]ICS Latest Nightly

2012-05-13T22:42:00.000+05:30

Download For Froyo Kernel:HERE

Defy+ GB Kernel :HERE

Latest Nightly's By Epsylon

[MOD]Increase Touch Performance For Atrix

2012-05-13T09:57:00.000+05:30

Touch Patch For Atrix V1
-Increasing touch performance
-Soft scrolling
-5 Multitouch
-Other many Features

Versions
-Fast:Extreme Performance,But little unstable
-Stable:Stable,Recommend version

-How to Apply
Download fast or stable,and flash in cwm.
And If you want discard this patch,flash original.zip

-Work
Cm9,Cm7,Blur based Roms,others...

-Not work yet
Neutrino Rom,MIUI,others...

TouchV1 Fast Download HERE

TouchV1 Stable Download HERE

Im Not Responsible Bricking Your Phone..By using This

[TUT]How To Flash Your Motorola By Using RSD Lite

2012-05-12T08:55:00.001+05:30

STEP1:OPEN RSD LITE
STEP2:SELECT THE SBF SEE IN 2ND SCREENSHOT
STEP3:CONNECT YOUR PHONE IN BOOT LOADER MODE FOR OLD LINUX OR ANDROID
STEP4:HIT START THEN YOUR PHONE WILL BE FLASHED...

Make Sure you are installed Drivers in Your PC Motorola USB Drivers are Necessary...

Noob Friendly..

[CM9] Defy And Defy+ Latest Nightly's

2012-05-11T21:51:00.001+05:30

Latest Nightly Build's For DEFY+ and Defy GB Kernel

Download for Defy+/Defy GB Kernel:GET It HERE

Download For Defy Build Froyo Kernel:HERE
90% Stable No Bugs So Far

Defy Build By Epsylon

[BootStrap]Atrix 2 Boot Strap Recovery

2012-05-11T17:06:00.000+05:30

Flash at your own risk! Enjoy!

Download BOOTSTRAP

Steps to use bootstrap:
1. Install the RazrBootstrap.apk
2. Select "Bootstrap Recovery"
3. Superuser will prompt for permissions
4. Select "Reboot Recovery"

When the phone reboots it will boot up into Clockworkmod Recovery.

ROM Installation VIDEO TUT

2012-05-10T22:22:00.001+05:30

This Guide Help You To Install WIUI Or Any Rom in Your Defy Will add More Videos Soon

[MOD]Beats Audio For Defy

2012-05-10T22:04:00.001+05:30

Want To Have Beats audio By Dr.Dre in you Defy Then now it is possible...

Flash The File To Enable beats audio in Your Phone

It's Only Working with GingerBeard Not tested with ICS Or Froyo

Flash at your own Risk

Download Beats

Defy BL7 Root

2012-05-10T15:01:00.000+05:30

STEP 1: Wipe
STEP2:FLASH This
STEP3:Wipe Again
STEP 4:Flash This Files
PART1
PART2
STEP5: Wipe Again

Done now you successfully Rooted your Defy With BL7

[APP] Flip Board For Android

2012-05-10T13:25:00.004+05:30

What is FlipBoard ??Social News Magazine For Android

You Can Download It Here

[TUT] How To Disassembly your Defy

2012-05-10T11:38:00.001+05:30