List of Latest Graphics and Animation RFPs Posted on RFPMart RFPMart LLC en-us https://www.rfpmart.com/graphics-and-animation-rfp-government-contract.html Sun, 07 Jun 2026 06:19:13 -0700 Engineering Services Firms for Physical Access Control Project This announcement is for the selection of an Engineering Services (ES) Firm to perform design services, technical specifications, working drawings, cost estimates, as–built drawings, construction period services and site–visits for the Altoona VA Project 503– 26–106, Replace Physical Access Control System at the Department of Veterans Affairs, Altoona VA Medical Center located in Altoona, Pennsylvania. The magnitude of Construction for the above referenced project is $4,000,000.00. It is anticipated that a Firm Fixed Price Contract will be awarded to the Engineering Services Firm selected for the aforementioned design services. The most highly qualified Engineering Services firm will be required to participate in a pre–proposal conference prior to submission of the price proposal. Any costs associated with the participation of the pre–proposal conference are not reimbursable. This is a request for all Service–Disabled Veteran Owned Small Business s to provide a SF 330. Please note that this is NOT a request for proposal. Eligible SF 330 responses received will be evaluated and the top three (3) most highly qualified candidates shall be requested to provide an oral presentation. This contract is being procured in accordance with the Brooks Act as implemented in Federal Acquisition Regulation (FAR) Subpart 36.6, Veterans Administration Acquisition Regulation (VAAR) 836.6 and the Veterans Administration Acquisition Manual (VAAM) Part M836 . Firms will be selected for presentations based on demonstrated competence and qualifications for required work. This contract is set–aside 100% for Service–Disabled Veteran–Owned Small Business s (SDVOSB) capable of completing work under the North American Industrial Classification System (NAICS) code 541330. The small business standard is $25.5 million dollars. SUBMISSION REQUIREMENTS: SF 330 submittals shall be sent electronically via email to the attention of Donald Kalivoda and Elijah McIntosh. Standard Forms 330 s must be received no later than 11:00 AM on July 06, 2026. The submittal packages are to be sent via email to the following: Attention: Donald J. Kalivoda Email: [email? redacted] Attention: Elijah McIntosh Email: [email? redacted] Subject Line: Solicitation 36C24426R0127 SF 330 Submittal Additionally, the submissions must include an insert detailing the following information placed at the front of the Submission. SAM Unique Entity Identifier Number The E–mail address of the Primary Point of Contact. A copy of Errors and Omissions Insurance Policy for the SDVOSB Prime. A copy of the firm s Pennsylvania State Licensure for the SDVOSB Prime or a statement indicating how the provided drawings will be sealed by a PA licensed Engineer. A statement indicating what office the Engineering Services firm will utilize as its primary design office. Special Note: Engineering Services Firm failing to provide any of the documentation detailed in this notice may be determined as Non–Responsive and may not be considered. Please note this is not a request for proposal. Eligible responses received will be evaluated and the most highly qualified will be compiled on a shortlist of candidates who will be contacted for an interview. For the evaluation, Professional Qualifications to Perform the Services Required, Specialized Experience and Technical Competence, are significantly more important than the other five (5) factors and are of equal weight and are of equal weight. The remaining five (5) factors are of equal weight among themselves. The following evaluation criteria shall be used to evaluate firms and determine the most highly qualified firm for possible contract award. Professional Qualifications to Perform the Services Required: This is intended to evaluate the personnel and their related qualifications. The key positions should include Project Managers, Quality Assurance Manager, Architects, Structural Engineers, Electrical Engineers, Mechanical Engineers, Fire Protection Engineers, and Interior Designers. Firm should indicate whether these personnel have professional certifications in particular field, i.e. PE in Mechanical Engineering. The evaluation board shall consider the specific experience and qualifications (i.e., education, training, registration, certifications, overall relevant experience, and longevity with the firm) of personnel proposed for assignment to the project, and their record of working together as a team when evaluating professional qualifications. The lead designer in each discipline must be registered but does not have to be registered in the particular state where the project is located; however, all drawings, calculations and specifications must be stamped and signed by a Professional Engineer from the state of Pennsylvania. Specialized Experience and Technical Competence: This factor evaluates the experience of the firm and design team in completing projects requiring skills similar Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126740-us-fed-c1da--replace-physical-access-control-system---design-design.html http://www.rfpmart.com/1126740-us-fed-c1da--replace-physical-access-control-system---design-design.html (1) Vendor needs to provide artist–in–residence services.– Workshop activities should include but not be limited to the following topics: fire recovery, climate change, healing through artmaking, storytelling, shared memory, place, history, and cultural preservation.– Artmaking workshops (Workshops) that provide space for the community to heal, express themselves creatively, and elevate and preserve the culture, stories, and memories.– Artist may engage and/or collaborate with other artists, culture bearers, subject matter experts, community leaders, and arts and culture organizations.– Develop a Workshop plan, which will include the design, schedule, curation, and locations of a series of Workshops. (2) All the questions must be submitted no later than June 09, 2026.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126635-usa-california-artist-in-residence-services-rfp.html http://www.rfpmart.com/1126635-usa-california-artist-in-residence-services-rfp.html – Vendor needs to provide U channel sign posts service. – 10' Galvanized steel U–channel post.– 3' Galvanized U–channel post anchor.– Lap splice kit to attach poles and stubs. Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126585-usa-new-york-u-channel-sign-posts-service-rfp.html http://www.rfpmart.com/1126585-usa-new-york-u-channel-sign-posts-service-rfp.html (1) Vendor needs to provide traffic control signs supplies. – Furnish traffic control signs. – Materials shall be supplied on an as–needed basis.– Signs shall include pre–drilled mounting holes (3/8–inch diameter) and shall have rounded corners. – All signs shall be fabricated using Engineer Grade Reflective Sheeting applied to 0.080–inch aluminum substrates.– Signs shall be reinforced with folding fiberglass ribs to ensure durability and ease of deployment.– Collapsible work zone signs shall be of retroreflective orange vinyl construction with black lettering and/or symbols.– Stands for work zone signs shall be constructed of heavy duty galvanized steel and shall have a minimum weight of fifteen pounds.   (2) The contract period will be for one year.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126558-usa-tennessee-traffic-control-signs-supplies-rfp.html http://www.rfpmart.com/1126558-usa-tennessee-traffic-control-signs-supplies-rfp.html (1) Vendor needs to provide public art service. – Provide artist, artist team, or artist and fabricator team for creating site–specific public art installations at the upcoming environmental and street services south.– Prioritize high–use areas such as outdoor staff gathering areas, interior flex and breakout spaces, and training rooms.– Artwork should create colourful, comfortable, and inviting environments that foster interaction, creativity, and pride in the workplace.– Fabricate the artwork according to the approved design, ensuring all components are structurally sound and comply with safety standards.(2) Pre–bid meeting will be held on May 29, 2026.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126548-usa-north-carolina-rfi-for-public-art-service-rfp.html http://www.rfpmart.com/1126548-usa-north-carolina-rfi-for-public-art-service-rfp.html (1) Vendor needs to provide z–card brochure 50th anniversary logo service.– Z–Card Brochure 50th Anniversary Logo   – 20,000 full color, accordion–folded (z–card) brochures, final size 4x6. Inside sheet is 16.75x21.75 in.(2) All the questions must be submitted no later than June 17,2026.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126492-usa-ohio-z-card-brochure-50th-anniversary-logo-service-rfp.html http://www.rfpmart.com/1126492-usa-ohio-z-card-brochure-50th-anniversary-logo-service-rfp.html (1) Vendor needs to provide bus wrapping services to the government authority located in Tennessee.– Responsible for providing production and installation materials, performing prepress functions, printing, shipping, installation and removal of advertising wraps and ad posters on buses and other support vehicles.– Full Wrap: 24– Half Wrap / Super Sides: 3– Kind Kong Ad: 25– Window Ad: 10– Transit Full Wrap: 25– Kong Ad: 10– Paratransit Window Ad: 40– King Ad: 50– Super King: 5– Queen Poster Ad: 5– Trolley King: 24– Full Back Ad: 25– Tail–Light Display: 20– Interior Cards: 667(2) All questions must be submitted no later than June 15,2026.(3) The contract period will be for three years.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126480-usa-tennessee-bus-wrapping-services-rfp.html http://www.rfpmart.com/1126480-usa-tennessee-bus-wrapping-services-rfp.html This Notice is for informational purposes only. It is not to be construed as an obligation on the part of the Washington Headquarters Services /Acquisition Directorate (WHS/AD).In order to proactively plan for future requirements, WHS/AD is conducting market research to locate qualified, experienced, and interested parties who have the capability to provide providing comprehensive support services for the Pentagon Graphic Design Support Services under the North American Industry Classification System (NAICS) code assigned to this procurement 541430 Graphic Design Services. Seeking capable vendors for fabrication and installation of Government designed exhibits on Government installations. Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126347-us-fed-graphic-design-exhibits-support-services.html http://www.rfpmart.com/1126347-us-fed-graphic-design-exhibits-support-services.html (1) Vendor needs to provide graphic designers service. • Responsible for meeting the requests from the agency, working closely with the office to visually package and communicate its evaluation work, knowledge products, and key messages in accessible and compelling formats.• Design and layout of evaluation reports, annual reports, briefs, leaflets, brochures, posters, infographics, data visualizations and other products.• Provide design, layout, and graphic inputs for the Annual Report on Evaluation.• Provide design, layout, and graphic inputs for the conference proceedings and other products related to the conference such as banners, standees, giveaways, etc.• Design communications/ outreach products (brochures, posters, flyers etc.).• Develop branding and visual marketing materials as requested.• Provide design and layout of knowledge sharing products (briefs, summaries, etc.).• Creativity and proactivity as required.  Sat, 06 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1126126-usa-new-york-global-graphic-designers-service-rfp.html http://www.rfpmart.com/1126126-usa-new-york-global-graphic-designers-service-rfp.html (1) Vendor needs to provide signage interior and exterior facility signs service.   Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125926-usa-texas-signage-interior-and-exterior-facility-signs-service-rfp.html http://www.rfpmart.com/1125926-usa-texas-signage-interior-and-exterior-facility-signs-service-rfp.html (1) Vendor needs to provide traffic sign posts services.• Beads, Glass, Sign and Stripe• Traffic Signal Poles, Standards and Brackets• Traffic Signals and Equipment, Electrical Systems(2) All questions must be submitted no later than June 17, 2026.  Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125764-usa-colorado-traffic-sign-posts-services-rfp.html http://www.rfpmart.com/1125764-usa-colorado-traffic-sign-posts-services-rfp.html (1) Vendor needs to provide portable changeable message sign service.– Portable, trailer–mounted dynamic message sign (PCMS) including, wireless communications equipment, hardware, software, delivery, integration, training, technical assistance and warranty intonation needed to operate and maintain the portable changeable message sign unit (PCMS).– The sign shall be full matrix led, capable of displaying variable height text with varying fonts, and graphic messages.– The sign shall be capable of both wireless and wired communications.– The sign board size requirements are as follows: large sign boards capable of displaying 3 lines of 18–inch–high letters with 8 characters per line; medium sign boards capable of displaying 3 lines of 12–inch–high letters with 8 characters per line.(2) All the questions must be submitted no later than June 12,2026. Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125703-usa-new-hampshire-portable-changeable-message-sign-service-rfp.html http://www.rfpmart.com/1125703-usa-new-hampshire-portable-changeable-message-sign-service-rfp.html (1) Vendor needs to provide traffic control signs and materials service.– Type 3 Electrocut Film w/ Synthetic– Any color sign blank, no legends/tex– Greenwich Business District w/ Arrow– VIP Stop Sign w/ graffiti film– Type 1 Prismatic Engineering(2) The contract period will be for one year.    Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125656-usa-connecticut-traffic-control-signs-and-materials-service-rfp.html http://www.rfpmart.com/1125656-usa-connecticut-traffic-control-signs-and-materials-service-rfp.html (1) Vendor needs to provide building N sign replacement service. – Fabricate and install interior and exterior signage for Building N on the main college campus.– Prepare shop drawings with sign layouts for owner’s review and approval before beginning fabrication.– Fabricate and assemble all signs.– Remove all existing interior signs. existing signs are mounted on various material such as gyp board walls and concrete block walls.– Owner will identify any existing signage they deem necessary to keep. all other signs need to be removed and disposed of off–site.– Extreme care should be used to minimize the damage by removing the signs to minimize the repair. repair of minor damage caused by the removal of the signs to be repaired by the college.– New signs are to be installed after the removal of the old signs.(2) All the questions must be submitted no later than June 09, 2026. Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125648-usa-south-carolina-building-sign-replacement-service-rfp.html http://www.rfpmart.com/1125648-usa-south-carolina-building-sign-replacement-service-rfp.html (1) Vendor needs to provide logo refresh design services.– Graphic design and marketing firm to provide professional graphic design services for brand and logo refresh.– Provide corresponding typography, and refresh the primary, secondary, and grayscale color palettes for the existing brand style guide.– Provide three to four graphic elements to complement the logo that can be utilized as part of the website redesign and print materials.– The firm selected must work with the website provider, Civic Plus, to ensure any typography can be used for web and print.– Typography matches must also be provided for design platforms such as Canva, Microsoft products.– Design and produce a modernized adaptation of the current logo with updated typography.– Provide recommended brand color palettes that include primary, secondary, and grayscale palettes.– Includes an option for redesigning the quarterly print newsletter.– Updated logo and build graphic elements.(2) All the questions must be submitted no later than June 15, 2026. Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125599-usa-minnesota-logo-refresh-design-services-rfp.html http://www.rfpmart.com/1125599-usa-minnesota-logo-refresh-design-services-rfp.html Vendor needs to provide wayfinding and signage services.• Incorporate an inclusive, universal, and accessible design so that it can be used by a wide range of users. • Create a modular, phased plan that can be built upon. • Ensure all wayfinding signage can be easily updated or replaced to keep content relevant and up–to–date, and signs in good condition. • Contribute to beautifying downtown street spaces while limiting sidewalk obstructions. • Where applicable, designs must be in compliance with the manual on uniform traffic control devices and other relevant federal or state guidelines. • Focus on general items, with limited directional signage to specific businesses off of agency (i.e. kiosks with maps to identify local businesses, or other solution as identified during design process). • Balance the importance of details (such as parking time limits, overnight parking) with visual clarity (not too busy or distracting).   Fri, 05 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125535-usa-michigan-wayfinding-and-signage-services-rfp.html http://www.rfpmart.com/1125535-usa-michigan-wayfinding-and-signage-services-rfp.html (1) Vendor needs to provide aluminum sign blanks installation service.   – The fabrication of traffic signage.– Octagon sign blank.– Purchase aluminum sign blanks.  – Square sign blank– 0020 6 X 18 inches sign blank thickness – .080.(2) The contract period will be for two years. Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125351-usa-louisiana-aluminum-sign-blanks-installation-service-rfp.html http://www.rfpmart.com/1125351-usa-louisiana-aluminum-sign-blanks-installation-service-rfp.html (1) Vendor needs to provide traffic control box art project services to the government authority located in Tulsa, OK.– Professional or emerging artists or teams of artists in response to a public art opportunity relating to the city’s traffic control boxes.– Serves as a 360 degree “photo–op” art piece wrapping a city traffic control box.– Includes a descriptive title and 5–10 sentence description of the artwork to be used in a Route 66 ArtStoryMaps.– Design to include capital of route 66 art StoryMaps graphic with QR code on it.– Design files must be 300 dpi or more.– Adheres to Public Works’ policy for wrapping traffic control boxes.(2) All questions must be submitted no later than June 18,2026.(3) A pre–bid meeting will be held on June 8, 2026. Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125158-usa-tulsa-oklahoma-traffic-control-box-art-project-services-rfp.html http://www.rfpmart.com/1125158-usa-tulsa-oklahoma-traffic-control-box-art-project-services-rfp.html Vendor needs to provide graphic design exhibits support services includes the design, production, and maintenance of high–quality exhibits throughout the Pentagon.– These exhibits are critical for communicating historical references and elevating the esprit de corps for employees, visitors, and distinguished guests.– Design and Research: Describe the capability to perform research and provide design services in support of various graphics exhibit projects, translating Government–provided concepts into detailed, executable plans– De–installation, Relocation, and Storage: Describe experience with carefully de–installing, transporting, and reinstalling sensitive exhibit materials. Include the ability to provide secure, temporary storage for display components during redesign or relocation efforts. Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125124-usa-washington-dc-rfi-for-graphic-design-exhibits-support-services-rfp.html http://www.rfpmart.com/1125124-usa-washington-dc-rfi-for-graphic-design-exhibits-support-services-rfp.html (1) Vendor needs to provide exit signs installation services on an as needed basis. (2) A pre–bid conference will be held on June 10, 2026.(3) All question must be submitted no later than June 17, 2026.(4) A contract period will be for one year.  Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125106-usa-massachusetts-exit-signs-installation-services-rfp.html http://www.rfpmart.com/1125106-usa-massachusetts-exit-signs-installation-services-rfp.html Vendor needs to provide graphic design support services.• Design of corporate reports, ranging from annual and labour market reports to one–off publications, ensuring these documents are clear, visually engaging and accessible.• Design of strategic, evidence–based, creative concepts and recommendations.• Design, development, creative copy writing and production of creative concepts, content and materials for corporate communications.• Creative ideas for how to communicate/present work visually.• Design for print (including stationery, brochures, posters, leaflets etc.)• Design and typesetting/formatting of English and, when necessary, Irish versions of reports for publication such as annual reports and corporate plans as required under the official languages act.• Proofing publications and design of one–off publications for agency as needed.• Design for adverts (including but not limited to video, online, radio, animations, digital audio, social media, video on demand, programmatic and press) in both English and Irish, as required under the official languages act.• Design for online presence such as website layout design, website skins, digital advertisements, social media and infographics in compliance with the web accessibility directive.• Design of presentations and interactive applications.• Developing new brands – logos, brand guidelines, campaign assets.  Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125081-ireland-graphic-design-support-services-rfp.html http://www.rfpmart.com/1125081-ireland-graphic-design-support-services-rfp.html (1) Vendor needs to provide aquatic centre sponsor signage services for the new building sign is to be installed at the aquatic centre and, the new road sign is to be installed at the main entranceto the community district.(2) All question must be submitted no later than June 17, 2026. (3) Vendor have to registered on Issuing Authority website in order to download unwatermarked RFP. Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125061-canada-northwest-territories-aquatic-centre-sponsor-signage-services-rfp.html http://www.rfpmart.com/1125061-canada-northwest-territories-aquatic-centre-sponsor-signage-services-rfp.html (1) Vendor needs to provide wayfinding upgrades services.(2) All question must be submitted no later than June 26, 2026. (3) Vendor have to registered on Issuing Authority website in order to download unwatermarked RFP. Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1125051-canada-ontario-wayfinding-upgrades-services-rfp.html http://www.rfpmart.com/1125051-canada-ontario-wayfinding-upgrades-services-rfp.html (1) Vendor needs to provide wayfinding signage design installation service.  – Sign engineering and graphic design translate the recommended sign inventory and draft design concepts into construction–ready documents, including engineering drawings, material specifications, and print–ready graphic files for each sign typology.– Municipal wayfinding sign engineering and graphic design.– The sign inventory, priority locations, and design direction.(2) All the questions must be submitted no later than June 17, 2026.    Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1124965-usa-massachusetts-wayfinding-signage-design-installation-service-rfp.html http://www.rfpmart.com/1124965-usa-massachusetts-wayfinding-signage-design-installation-service-rfp.html (1) Vendor needs to provide wayfinding signage and turn–key signage installation service. • Providing the university with wayfinding signage and turnkey signage installation services for both interior and exterior signage in accordance with the information contained within the campus wayfinding guidelines, interior signage standards manual, 2010 ADA standards for accessible design, agricultural signage standards(2) The contract period will be for one year.   Thu, 04 Jun 2026 00:00:00 -0700 http://www.rfpmart.com/1124955-usa-virginia-wayfinding-signage-and-turn-key-signage-installation-service-rfp.html http://www.rfpmart.com/1124955-usa-virginia-wayfinding-signage-and-turn-key-signage-installation-service-rfp.html