selling some 12 volt air compressors (see pic) , 15 dollars each , message me if interested

Hitch vice for receiver of vehicle. New never used

Multiple in stock. Available with pneumatic assist arm. Brand new units. Credit card accepted. Inquire for demo pricing
Motor: 120 VAC, 2 HP, single phase
Operating pressure: 115-145 PSI
Rim clamping range (External): 10" - 22"
Rim clamping range (Internal): 12" - 24"
Rim clamping range (with motorcycle adaptor): up to 18"
Max. wheel diameter: 41"
Max. wheel width: 3" - 15"
Noise: < 70 db
Air regulator and oil lubricator
Plastic protective mount/demount head
CETL certified: For Canada and the USA
Optional clamping adapters: Sold separately
Optional pneumatic powered assist arm: TMG-PAT24 sold separately

For Sale 2 Post 10000 Lift new

BRAND NEW, STILL IN THE CRATE

This lift has a manufacturers rated lifting capacity of 1500 Lbs. This ramp is commercial grade.

The Atlas HI-RISE 1500 motorcycle lift is powered by the Atlas HTTLA 5100 air/hydraulic power unit. This air/hydraulic power system has an extra large hydraulic fluid reservoir; thus assuring a smooth and steady lift travel to the highest locking position. You must have an air compressor that produces a minimum of 100 PSI to effectively operate the Atlas HI-RISE 1500 lift.

Benefits of the Atlas HI-RISE 1500 Motorcycle/ATV Lift

Increased Lifting Height: The Atlas HI-RISE 1500 has a maximum lifting height of 43 inches. This increased lifting height makes it easier to work on vehicles while the operator is standing.

Drop Out Rear Section: The Atlas HI-RISE 1500 includes a standard drop out rear section to allow for easy removal of the rear wheel assembly.

Portable: The Atlas HI-RISE 1500 is portable.

Front Wheel Clamp and Approach Ramps: The Atlas HI-RISE 1500 motorcycle/ATV lift comes with a heavy duty front wheel clamp and a set of adjustable approach ramps.

Highlights

Weight capacity 1,500 LB.
Includes removable drop out section
Air/Hydraulic Operated (Pump Included, External Air Supply Required)
Removable approach ramp included
Table length without approach ramp or chopper extension 80
Lowered height 7 ½
Maximum lifting height - 43
High quality Atlas air/hydraulic power unit
Table width 51" with side extensions
Vise included
Heavy Duty Construction
1 Year Structural, 90 Day Hydraulic
Specifications

Weight Capacity
1,500 lbs.
Overall length (w/ ramps)*
125" (10' 5 ")
Center Table length (w/o ramps)*
99 ¾" (8' 3 ¾")
Side Extension length (w/o ramps)
88 1/2" (7' 4 1/2")
Center Table width (w/ side extensions)
51 1/8" (4' 3 1/8")
Center Table width (w/o side extensions)
29 ½"
Rear Cut Out
17" wide x 20" long
Height fully raised
42 1/2 " (3' 6 1/2")
Height lowered
7 ½
6 Locking Positions
(23", 27 ½", 31 ¼", 34 ¾", 37 ½", and 40")
Air Requirements
90 - 100 PSI / 5 CFM Delivery
Gauge of Steel
11 Gauge (.11" / 2.8mm)
Base of Lift
87 1/2" long x 29 /12" wide x 4 1/4" tall
Shipping Weight
800 Lbs.

for sale older (manual) battery charger , 6/12 volt , 10 amp , message me if interested

for sale motomaster battery charger , automatic and manual , 6 /12 volt , 100/15/2 amp with engine start , message me if interested

jack stand for sale (see pic) , message me if interested

For sale a set of 8' booster cables in great shape.

Email preferred

Brand new unit. Credit card accepted. Inquire for demo pricing
Max capacity: 6000 lb
Maximum height: 48”
Minimum height: 5-⅜”
Platform width: 41-⅜”
Platform length: 60-¼”
Maximum work width: 51-½”
Travel speed to max. height: 45 s
Cylinder specifications:
Cylinder bore: 1-½”
Cylinder stroke: 15”
Hydraulic hose: 10’
Steel caster wheels
Single-point lock release
Hydraulic Motor Pump:

120 V, 60 Hz, 3 HP
No-load speed: 3420 RPM
Max. working pressure: 2650 PSI
Tank capacity: 6 L
CETL certified for Canada and the USA

3 Ton Garage floor jack $80 Phone 709-597-2804

Unused. Buffing pads & attachment.
$8.00
709 765-6175

9000 lb 2 post lift asking $1200. Phone 699-7482. Could deliver depending how far.

Compressor which has had little use. Comes with air hose, tire inflation tool and air blowing tool. Phone 709-368-6772

Set of two 12 ton jack stands. Good condition.

Lincoln Phuenmatic grease gun. Works great. I have no need for it, good for a mechanic/ Garage. Sells for over $150.

Asking $80.

for sale 2.5 ton floor jack , message me if interested

Battery Tender Junior Smart Battery Charger and Maintainer, 800mA, 12V. Brand New. Never used.

Looking for a ramp for my back yard Garage. Email or text with what you have. 682 5071

Coats tire changer, and John beam balancer in great shape..

Heavy duty automotive booster cables, new clamps, 10 feet long, 10 gauge (?) wire and heavy insulated cover.
"If you are viewing this listing, the item(s) is still available."

Car hoist 12000 lb two post

12000 lb 4 post car hoist Works good

Serious inquiries PM me for information.

Carburetor Adjusting Tool with 11" flexible shaft for easy access to tight places. Tip sizes are double D, 1/4 ", 3/32 ", 2.5 mm and 4.5 mm. New. $20. Call 709 753 4034 or 709 727 8419 or email leopwhite@hotmail.com.

For sale Big Red 2 ton hydraulic trolley jack. Only used three times to change tires on car. Reason for selling, no long have a car and the lift height is not high enough for new vehicle.

Predator tuning performance unit (was used on a diesel truck) - mint shape no longer needed...priced on Amazon $469.99 - tiu get now for half price.

Tread repair kit ,for repairing nuts and bolts .
Also repairs wheel studs
New

New Mac stud remover

FORSALE---

1-BRAND NEW TITAN OBD11/EOBD + CAN CODE READER.
THIS IS A FANTASTIC CODE READER

--SAVE YOU ALOT OF MONEY GOING TO A GARAGE TO GET YOUR YOUR CAR CHECKED OUT.
-- TO MANY OPTIONS TO LIST.
-- CHECK ENGINE LIGHT (MIL )
---ERASE ENGINE FAULT CODE.

EVERYONE SHOULD OWN ONE OF THESE CODE READERS...

SELLING FOR ONLY---$45.00....

FOR INQUIRIES, CALL ---709-765-8490 ---

Tools are extra, have various other things as well .cleaning our garage.

Brand new still in the box QuickJack 7000TL. Lifts your vehicle over two feet. I purchased two by mistake.

Truckers Tools . Wrench chrome 50.00 dollars and tool for tighting straps 40.00 dollars

4 foot break can be used to bend up cab corners and rocker panels located in gfw

Undercoating barrel pump and sprayer and 3/4 barrel of oil from rust authority out of Quebec

Both levels tool box and more tool than youll ever need including sockets, hammers, screwdrivers, ratchets, saws, files, etc.

All 4 jack stands work as they should
65$ OBO

2 Ton Cross Beam Adaptor for use with a Floor-Jack to lift vehicles. Brand name is GRIP and it adjusts from 27 5/8ths to 38 inches between centers. This tool is still in it's original packaging and has never been used. Asking $30 ono. For more info call Sel at 709-689-9122. NO texts please.

Brand new craftsman pickup tool

FUNNELS NEW PACKAGE DEAL... LOCATED IN ARNOLD'S COVE

Jack works as it should just don’t have the room or time for it. Perfect for someone who doesn’t have a hoist or tire guy .

Like new Snapon 84in epic new used professionally storage at home Tools Not Included $10500 ono

one 200/60/40/2amp battery charger on wheels,NAPA brand works as it should,

one new six "bench grinder,1 stone missing.also 1 ten " polisher,used,$25.

For sale 1 seven drawer MasterCraft top box,26x18x23 " new in unopened box & 1 seven drawer rollaway cabinet unused 32x18x31,5,casters missing

one Gabriel shock/parts cabinet,2 sliding doors,good condition

one new Oxweld acctelene torch with tip,unused.

for sale hand operated tire air pump , message me if interested

Oil filter strap wrench. Phone calls only. Call 709 671 4441 or 709 424 4596.