Origami Instructions | Folding Origami | Origami

How to Fold an Origami Paper Crane: A Step-by-Step Guide for Beginners

noreply@blogger.com (Unknown) — Thu, 21 May 2026 06:31:40 +0000

The origami paper crane (Orizuru) is arguably the most classic and famous of all Japanese paper-folding designs. Symbolizing peace, good health, and longevity, learning how to fold a crane is the perfect entry point into the world of origami.

In this tutorial, we will break down the process into simple, easy-to-follow steps. Grab a square piece of origami paper, and let’s get started!

What You Need

1 Sheet of Square Origami Paper (Standard 15x15 cm is ideal). You can use dual-colored paper to make tracking the folds easier.

Step-by-Step Instructions

Refer to the instructional image below to visually guide your folds, you can also find complete step by step origami tutorial image at the end of this post:

Step 1: Start with Square Paper

Lay your paper flat on a hard surface. If you are using colored paper, start with the colored side facing up.

Step 2: Fold & Unfold Diagonally (x2)

Fold the paper in half diagonally to form a large triangle. Crease it well, then unfold it back to a square. Repeat the process by folding along the opposite diagonal corner, crease, and unfold again. You should now have an "X" crease across your paper.

Step 3: Fold & Unfold Horizontally & Vertically

Flip the paper over to the white side. Fold the paper in half horizontally (top to bottom), crease, and unfold. Then, fold it in half vertically (left to right), crease, and unfold. You will see a grid of creases intersecting in the center.

Step 4: Collapse into a Square Base

Using the creases you just created, bring the three corners down toward the bottom corner. The paper should naturally collapse along the folds into a smaller square shape, known as the Square Base. Smooth it flat.

Step 5: Fold Kite Shape

Position the square base so that the open end is facing down toward you. Take the outer lower edges of the top layer and fold them inward toward the center crease, creating a kite-like shape. Repeat this fold on the back layer.

Step 6: Petal Fold (Front & Back)

Unfold the kite flaps you just made in Step 5. Lift the bottom corner of the top layer upward, opening it up completely. Press the sides inward along the existing creases to flatten it into a long diamond shape. Flip the paper over and repeat this exact Petal Fold on the other side.

Step 7: Fold Sides In (Kite Part 2)

With the diamond shape flat, fold the outer lower edges of the top layer inward toward the center crease once again to narrow the shape. Flip the model over and repeat this step on the back layer.

Step 8: Inside Reverse Fold (Head & Tail)

You will notice two long, narrow legs at the bottom. Use an Inside Reverse Fold to flip these legs upward and outward between the layers of paper—one side will become the head, and the other will be the tail. On the tip of one of these points, perform another small inside reverse fold downward to create the crane's head.

Step 9: Finished Paper Crane

Gently pull the wings apart to expand the body of your crane. If needed, you can gently blow into the small hole at the bottom of the body to help it puff out into its final 3D shape. Your classic origami paper crane is complete!

Origami Tips for Success

Sharper Creases = Better Results: Use your fingernail or a plastic ruler to press down hard on every fold. Precise creases make the later steps much easier to handle.
Patience is Key: If a step looks confusing, take a close look at the arrow indicators in the diagram to see exactly which direction the paper needs to move.

How to Fold an Origami Badger: A Step-by-Step Woodland Guide

noreply@blogger.com (Unknown) — Thu, 21 May 2026 05:41:00 +0000

The badger is a beloved and iconic woodland creature known for its striking black-and-white stripes and sturdy build. Capturing these distinct features in paper form is a rewarding challenge for origami enthusiasts. This project uses clever squash and reverse folds to naturally reveal the badger's signature striped face without needing scissors or glue.

This tutorial is perfect for intermediate paper folders or ambitious beginners looking to level up their skills. Let's transform a simple square of paper into a beautiful 3D origami badger!

What You Need

1 Sheet of Square Origami Paper (Ideally black on one side and white on the other side to accurately create the badger's coat pattern).

Step-by-Step Instructions

Refer to the instructional image below to visually guide your folds, you can also find whole complete step by step image at the end of this tutorial:

Step 1: Start with Square Black/White Paper

Lay your paper flat on a hard surface. Start with the black side facing up (if your paper has a white reverse side, it will create the contrasting patterns later).

Step 2: Fold & Unfold Diagonally (x2)

Fold the paper in half diagonally by bringing one corner to the opposite corner. Crease well and unfold. Repeat with the other two corners to create two diagonal valley folds intersecting in the middle.

Step 3: Fold & Unfold Horizontally (x1)

Fold the paper in half horizontally, bringing the top edge down to the bottom edge. Crease the line firmly and unfold it completely.

Step 4: Fold Sides In (Kite Fold)

Bring the left and right side corners inward, aligning the outer edges with the vertical center line to create a sharp kite shape.

Step 5: Fold Top Layer Down (Prep for Base)

Fold the top triangular flap down along the horizontal crease line you created in Step 3. This acts as a guide line for the upcoming base.

Step 6: Create Squash Base (Part 1)

Carefully open up the top layer folds you just made. Gently pull the paper apart and push down on the sides to squash the pockets flat, preparing to form a symmetrical diamond shape.

Step 7: Create Squash Base (Part 2)

Press and flatten the squashed sections firmly down along the creases. The model should now display a sharp diamond shape in the center with alternating white and black sections exposed.

Step 8: Fold in Half & Define Head

Fold the entire model in half vertically (bringing the left side over to the right side). Rotate the model slightly to the side to begin shaping the badger's neck and downward-pointing head.

Step 9: Inside Reverse Fold for Muzzle

Take the long point that forms the front of the model and perform an Inside Reverse Fold. This pushes the tip down and inward between the main layers of the body to form a sharp, distinct snout/muzzle.

Step 10: Create Ears (Outside Reverse Fold)

Locate the small flaps near the top of the head. Use an Outside Reverse Fold to flip these flaps backward and upward, shaping two small, pointed badger ears.

Step 11: Define Body & Tail

Perform additional inside and outside folds along the rear end of the paper structure to shape the hind legs and create a short, stubby tail extending outward from the back.

Step 12: Finished Origami Badger

Your origami badger is now complete! Ensure all four legs are creased well at the bottom so it can stand independently. Repeat the leg folds on the back layer to ensure complete symmetry on both sides.

Origami Tips for Success

Embrace Two-Toned Paper: Using dual-colored paper (black/white) is highly recommended for this project, as the white stripes on the badger's face are created naturally by exposing the reverse side of the paper.
Take Your Time with Squash Folds: Steps 6 and 7 require careful handling. If the paper doesn't flatten easily, reopen the model slightly and ensure your preliminary creases from Steps 2 and 3 are crisp.

Realistic Boat Origami Tutorial

noreply@blogger.com (Unknown) — Wed, 10 Jul 2024 02:49:00 +0000

Realistic Boat Origami tutorial, you can watch it here:

Easy Standing Dragon v2 Origami Tutorial

noreply@blogger.com (Unknown) — Fri, 21 Jun 2024 01:52:00 +0000

Easy Standing Dragon origami v2 Tutorial. Each instruction is very easy to follow.

Easy Dragon origami Tutorial:

Easy Dragon Origami Tutorial v1

noreply@blogger.com (Unknown) — Thu, 20 Jun 2024 08:05:00 +0000

Very Easy Dragon Origami Tutorial, very easy for everyone. You can do it within 10 minutes, even if you are a beginner. Happy Folding everyone.

Origami Instructions - Paper Air plane A-4 Skyhawk

noreply@blogger.com (Unknown) — Tue, 17 Jan 2017 03:14:00 +0000

Here is origami instructions to fold a Paper Air Plane A-4 Skyhawk. It is easy to follow..
This is very Awesome airplane Origami :)

Download Origami Instructions - Paper Air plain A-4 Skyhawk

Origami Instructions - Paper Air plane P-51 Mustang

noreply@blogger.com (Unknown) — Tue, 17 Jan 2017 03:07:00 +0000

Here is origami instructions to fold a Paper Air Plane P-51 Mustang. It is easy to follow..
This is very Awesome airplane Origami :)

Download Origami Instructions - Paper Air plain P-51 Mustang

Origami Instructions - Paper Air plane Eurofighter 2000

noreply@blogger.com (Unknown) — Tue, 17 Jan 2017 02:54:00 +0000

Here is origami instructions to fold a Paper Air plane Eurofighter 2000. It is easy to follow..
This is very Awesome airplane Origami :)

Download Origami Instructions - Paper Air plane Eurofighter 2000

Origami Instructions - Spider Origami

noreply@blogger.com (Unknown) — Thu, 29 Dec 2016 03:05:00 +0000

Here is origami instructions to fold a Spider. It is easy to follow..
This is very cute spider Origami :)

Download Origami Instructions - Spider

Origami Instructions - Bear Origami

noreply@blogger.com (Unknown) — Tue, 15 Nov 2016 03:09:00 +0000

Here is origami instructions to fold a Bear. It is easy to follow..
This is very cute bear Origami:)

Download Origami Instructions - Bear

Origami Instructions - Heart (Love) Origami

noreply@blogger.com (Unknown) — Fri, 27 Jan 2012 16:42:00 +0000

Here is origami instructions to fold a Heart (Love). It is easy to follow..
Make your sweet nice Valentine's Day different from others.

Download Origami Instructions - Heart (Love)

Origami Instructions - Goldfish

noreply@blogger.com (Unknown) — Fri, 14 Oct 2011 13:12:00 +0000

Here is origami instructions to fold a Goldfish. It is easy to follow..

Download Origami Instructions - Goldfish

Origami Instructions - Butterfly

noreply@blogger.com (Unknown) — Fri, 14 Oct 2011 13:00:00 +0000

Here is origami instructions to fold a Butterfly. It is easy to follow..

Download Origami Instructions - Butterfly

Origami Instructions - Spinosaurus

noreply@blogger.com (Unknown) — Tue, 20 Sep 2011 03:48:00 +0000

Here is origami instructions to fold a Spinosaurus. It is easy to follow..

Download Origami Instructions - Spinosaurus

Origami Instructions - Azalea

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 16:08:00 +0000

Here is origami instructions to fold an Azalea. It is easy to follow..

Download Origami Instructions - Azalea

Origami Instructions - Praying Mantis

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 15:18:00 +0000

Here is origami instructions to fold a Praying Mantis. It is easy to follow..

Download Origami Instructions - Praying Mantis

Origami Instructions - King Cobra

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 15:08:00 +0000

Here is origami instructions to fold a King Cobra. It is easy to follow..

Download Origami Instructions - King Cobra

Origami Instructions - Horse

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 15:04:00 +0000

Here is origami instructions to fold a Horse. It is easy to follow..

Download Origami Instructions - Horse

Origami Instructions - Pegasus

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 14:56:00 +0000

Here is origami instructions to fold a Pegasus. It is easy to follow..

Download Origami Instructions - Pegasus

Origami Instructions - White Shark

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 14:26:00 +0000

Here is origami instructions to fold a White Shark. It is easy to follow..

Download Origami Instructions - White Shark

Origami Instructions - Grasshopper

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 14:22:00 +0000

Here is origami instructions to fold a Grasshopper. It is easy to follow..

Download Origami Instructions - Grasshopper

Origami Instructions - Dragon in Flight

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 14:11:00 +0000

Here is origami instructions to fold a Dragon in Flight. It is easy to follow..

Download Origami Instructions - Dragon in Flight

Origami Instructions - 3 Heads Dragon

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 14:06:00 +0000

Here is origami instructions to fold a 3 Heads Dragon. It is easy to follow..

Download Origami Instructions - 3 Heads Dragon

Origami Instructions - Diplodocus

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 13:58:00 +0000

Here is origami instructions to fold a Diplodocus. It is easy to follow..

Download Origami Instructions - Diplodocus

Origami Instructions - Chinese Dragon

noreply@blogger.com (Unknown) — Mon, 19 Sep 2011 13:51:00 +0000

Here is origami instructions to fold a Chinese Dragon. It is easy to follow..

Download Origami Instructions - Chinese Dragon