5 Easy Steps to Root Your Galaxy S3 on Android 4.3

2014-05-10T08:34:00.002-07:00

I'll show you "How to root galaxy s3 on android 4.3". It's very simple. Maybe will take two minutes! Anyway, i don't like verbiage, let's get started.

Step 1: Download this required 3 files.

Step 2: Get your Galaxy S3 than tap the "Settings", enter "Developer Options" and activate "USB Debugging". If "Developer Options" doesn't appear you must enter "About Device" and tap 7 times "Build Number". Now "Developer Options" activated.

Step 3: Turn off the Galaxy S3 and turn it back on by hold the "Power" button, "Home" button and "Volume Down" button simultaneously. Your screen as in the picture below. To contiune press the "Volume Up" button,

Step 4: Install "SGS3 USB Drivers" on your computer and run "Odin 3.07". After them using USB cable, connect your Galaxy S3 to computer. You should see a blue ID:COM box and receive "Added!" message.

Step 5: Within Odin, press the "PDA" button and select the tar.md5 file from the CF-Auto-Root archive. And click "Start" button. Wait until the installation process completes. Don't forget any interruption may result in a bricked device.

After a PASS message appears, your phone will reboot automatically and you'll offically be rooted. You can look in your app, if you have "SuperSU", than your Galaxy S3 succes successfully rooted.

Don't forget too;
As always, Paranoid Techs assumes no liability for this root guide. Backup your Galaxy S3 and charge it to at least 50 percent.