PC HACK TRICKS

Speed up your internet by 20%

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 14:49:00 +0000

Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc

You can get it back:

Click Start then Run and type "gpedit.msc" without quotes. This opens the group policy editor.

Then go to:
--> Local Computer Policy
--> Computer Configuration
--> Administrative Templates

--> Network

--> QOS Packet Scheduler

--> Limit Reservable Bandwidth.

Double click on Limit Reservable bandwidth.

It will say it is not configured, but the truth is under the 'Explain' tab i.e." By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.

Improve Windows XP Shutdown Speed

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 14:20:00 +0000

This tweak reduces the time XP waits before automatically closing any running programs when you give it the command to shutdown.
Go to Start then select Run
Type 'Regedit' and click ok
Find 'HKEY_CURRENT_USER\Control Panel\Desktop\'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now select 'HungAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'

Now find 'HKEY_USERS\.DEFAULT\Control Panel\Desktop'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now find 'HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\'
Select 'WaitToKillServiceTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'

Increase your RAM and so system speed

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 14:12:00 +0000

1). Start any application, say Word. Open some large documents.

2). Press CTRL+SHIFT+ESC to open Windows Task Manager and click Processes tab and sort the list in descending order on Mem Usage. You will notice that WINWORD.EXE will be somewhere at the top, using multiple MBs of memory.

3). Now switch to Word and simply minimize it. (Don't use the Minimize All Windows option of the task bar).

4). Now go back to the Windows Task Manager and see where WINWORD.EXE is listed. Most probably you will not find it at the top. You will typically have to scroll to the bottom of the list to find Word. Now check out the amount of RAM it is using. Surprised? The memory utilization has reduced by a huge amount.

5). Minimize each application that you are currently not working on by clicking on the Minimize button & you can increase the amount of available RAM by a substantial margin. Depending upon the number and type of applications you use together, the difference can be as much as 50 percent of extra RAM.

In any multitasking system, minimizing an application means that it won't be utilized by the user right now. Therefore, the OS automatically makes the application use virtual memory & keeps bare minimum amounts of the code in physical RAM.

REGEDIT Keyboard Shortcuts

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 14:07:00 +0000

Searching:
"Ctrl+F" -- Opens the Find dialog box.
"F3" -- Repeats the last search.

Browsing:
"Keypad +" -- Expands the selected branch.
"Keypad -" -- Collapses the selected branch.
"Keypad *" -- Expands all the selected branch's sub keys.
"Up Arrow" -- Selects the previous key.
"Down Arrow" -- Selects the next key.
"Left Arrow" -- Collapses the selected branch if it's not collapsed; otherwise, selects the parent key.
"Right Arrow" -- Expands the selected branch if it's not already expanded; otherwise, selects the key's first sub key.
"Home" -- Selects My Computer.
"End" -- Selects the last key that's visible in the key pane.
"Page Up" -- Moves up one page in the key pane.
"Page Down" -- Moves down one page in the key pane.
"Tab" -- Moves between the key and value panes.
"F6" -- Moves between the key and value panes.

Others:
"Delete" -- Deletes the select branch or value.
"F1" -- Opens Regedit's Help.
"F2" -- Renames the selected key or value.
"F5" -- Refreshes the key and value panes.
"F10" -- Opens Regedit's menu bar.
"Shift+F10" -- Opens the shortcut menu for the selected key or value.
"Alt+F4" -- Closes Regedit.

Windows Keyboard Shortcuts for Internet Explorer

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 14:01:00 +0000

These are achieved by holding down the CONTROL (CTRL) key and pressing the assigned key

To Select all items on a webpage use CTRL and A.

To Copy a selected item to the clipboard use CTRL and C.

To Paste an item from the clipboard into a document use CTRL and V.

To Add the current page/document to your favorites use CTRL and D.

To Open the IE search utility use CTRL and E.

To Open the FIND box to search the current document use CTRL and F.

To Open the History utility use CTRL and H.

To Open the Favorites utility use CTRL and I.

To Go to a new location/document use CTRL and L. Also CTRL and O.

To Open a new Explorer window use CTRL and N.

To Print the current page/document use CTRL and P.

To Refresh the current page/document use CTRL and R or use the F5 key.

To Save the current document/page use CTRL and S.

To Close the current Explorer window use CTRL and W.

These are achieved by holding down and pressing a combination of keys

To go to your default homepage use ALT and the HOME key.

To go forward one page (equivalent to the FORWARD button) use ALT and the right arrow key.

To go back one page (equivalent to the BACK button) use ALT and the left arrow key.

Windows Keyboard Shortcuts for Mozilla Firefox

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 13:53:00 +0000

CTRL + A	Select all text on a webpage
CTRL + B	Open the Bookmarks sidebar
CTRL + C	Copy the selected text to the Windows clipboard
CTRL + D	Bookmark the current webpage
CTRL + F	Find text within the current webpage
CTRL + G	Find more text within the same webpage
CTRL + H	Opens the webpage History sidebar
CTRL + I	Open the Bookmarks sidebar
CTRL + J	Opens the Download Dialogue Box
CTRL + K	Places the cursor in the Web Search box ready to type your search
CTRL + L	Places the cursor into the URL box ready to type a website address
CTRL + M	Opens your mail program (if you have one) to create a new email message
CTRL + N	Opens a new Firefox window
CTRL + O	Open a local file
CTRL + P	Print the current webpage
CTRL + R	Reloads the current webpage
CTRL + S	Save the current webpage on your PC
CTRL + T	Opens a new Firefox Tab
CTRL + U	View the page source of the current webpage
CTRL + V	Paste the contents of the Windows clipboard
CTRL + W	Closes the current Firefox Tab or Window (if more than one tab is open)
CTRL + X	Cut the selected text
CTRL + Z	Undo the last action

Windows Keyboard Shortcuts for Mozilla Firefox
F1	Opens Firefox help
F3	Find more text within the same webpage
F5	Reload the current webpage
F6	Toggles the cursor between the address/URL input box and the current webpage
F7	Toggles Caret Browsing on and off. Used to be able to select text on a webpage with the keyboard
F11	Switch to Full Screen mode

Trick To Make Your Firefox Fast

noreply@blogger.com (Paresh Modi) — Sun, 27 Jun 2010 13:40:00 +0000

This Firefox tricks will improve the speed & load time of firefox. And you will be able to surf faster.

Type about:config in the address bar, Then look for the following entries, and make the corresponding changes.
network.http.max-connections-per-server =32
network.http.max-persistent-connections-per-proxy =16
network.http.max-connections = 64
network.http.max-persistent-connections-per-server = 10
network.http.pipelining = true
network.http.pipelining.maxrequests = 200
network.http.request.max-start-delay = 0
network.http.proxy.pipelining = true
network.http.proxy.version = 1.0

Lastly right-click anywhere and select New- Integer. Name it nglayout.initialpaint.delay and set its value to 0. This value is the amount of time the browser waits before it acts on information it receives. Enjoy!!

How to Hack E-Mail Account Password - Email Hacking Software

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:42:00 +0000

How to Hack Email Account Passwords Using ProRat?
1. First of all Download ProRat. Once it is downloaded right click on the folder and choose to extract it. A password prompt will come up. The password will be "pro".

2. Open up the program. You should see the following:

3. Next we will create the ProRat Trojan server. Click on the "Create" button in the bottom. Choose "Create ProRat Server".

4. Next put in your IP address so the server could connect to you. If you don’t know your IP address click on the little arrow to have it filled in for you automatically. Next put in your e-mail so that when and if a victim gets infected it will send you a message. We will not be using the rest of the options.

5. Now Open General settings. This tab is the most important tab. In the check boxes, we will choose the server port the program will connect through, the password you will be asked to enter when the victim is infected and you wish to connect with them, and the victim name. As you can see ProRat has the ability to disable the windows firewall and hide itself from being displayed in the task manager.

Here is a quick overview of what they mean and which should be checked:

6. Click on the Bind with File button to continue. Here you will have the option to bind the trojan server file with another file. Remember a trojan can only be executed if a human runs it. So by binding it with a legitimate file like a text document or a game, the chances of someone clicking it go up. Check the bind option and select a file to bind it to. A good suggestion is a picture or an ordinary text document because that is a small file and its easier to send to the people you need.

7. Click on the Server Extensions button to continue. Here you choose what kind of server file to generate. I prefer using .exe files, because it is cryptable and has icon support, but exe’s looks suspicious so it would be smart to change it.

8. Click on Server Icon to continue. Here you will choose an icon for your server file to have. The icons help mask what the file actually is. For my example I will choose the regular text document icon since my file is a text document.

9. After this, press Create server, your server will be in the same folder as ProRat. A new file with name "binded_server" will be created. Rename this file to something describing the picture. A hacker could also put it up as a torrent pretending it is something else, like the latest game that just came out so he could get people to download it.

Very important: Do not open the "binded_server" file on your system.

10. You can send this trojan server via email, pendrive or if you have physical access to the system, go and run the file. You can not send this file via email as "server.exe", because it will be detected as trojan or virus. Password protect this file with ZIP and then email it. Once your victim download this ZIP file, ask him to unlock it using ZIP password. When the victim will double click on the file, he will be in your control.

11. Now, I will show you what happens when a victim installs the server onto his computer and what the hacker could do next.

Once the victim runs the server on his computer, the trojan will be installed onto his computer in the background. The hacker would then get a message telling him that the victim was infected. He would then connect to his computer by typing in his IP address, port and clicking Connect. He will be asked for the password that he made when he created the server. Once he types it in, he will be connected to the victims computer and have full control over it.

12. Now the hacker has a lot of options to choose from as you can see on the right. He has access to all victim's computer files, he can shut down his pc, get all the saved passwords off his computer, send a message to his computer, format his whole hard drive, take a screen shot of his computer, and so much more. Below I’ll show you a few examples.

13. The image below shows the message that the victim would get on his screen if the hacker chose to message him.

14. Below is an image of the victims task bar after the hacker clicks on Hide Start Button.

15. Below is an image of what the hacker would see if he chose to take a screen shot of the victims screen.

As you saw in the above example, a hacker can do a lot of silly things or a lot of damage to the victim. ProRat is a very well known trojan so if the victim has an anti-virus program installed he most likely won’t get infected. Many skilled hackers can program their own viruses and Trojans that can easily bypass anti-virus programs.

Top 10 Ways to Extend Your Mobile Phone Battery Life

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:41:00 +0000

Learn How To Maximize Your Mobile Phone Battery Life

Today mobile phones are a necessity in one’s life. We talk much on phone and the battery of the phone gets used up. So we always find the means to save the battery of the phone so that we can talk as much as possible. Nothing is quite as annoying as having your mobile battery get drained while you’re trying to make an important phone call.

There are many applications and programs which consume the mobile battery at a faster rate. Our bad habits of avoiding switching off the mobiles phones when not in use especially at night consume more battery. The new phones with greater megapixels also consume a lot of battery power.

In this article i'm going to show you some steps to maximize your mobile battery life:

1. Turn off your mobile

Turning off mobile handsets is one of the most effective measures to save the battery power. You can turn off your mobile during the time you go to bed or when you attend a meeting. Turning off your mobile phone when no connectivity is available also plays a vital role in saving your battery power.

2. Switch off the vibrate function

Vibrate alert function in mobile phones consumes a lot of battery power. So switch off the vibrate alert function of your phone.

3. Turn off the connectivity means

Turning off connectivity means like Wi-Fi, Bluetooth and infrared also save a major part of your battery power.

4. Avoid screensavers

To save battery power, avoid the use of screensavers on your mobile and use of simple wallpapers will be more beneficial.

5. Reduce the screen brightness

More the brightness of your phone more is the power consumed, so keep the brightness level of your phone to a minimum level. Also set the display time out as low as possible.

6. Terminate Applications

Termination of applications of your mobile phone when not in use also saves a lot of battery power.

7. Avoid heating

Keep your mobile phone cool. Keep it off from direct exposure to sun or any heating appliance. The preferable range at which the battery works fine is 10-35 Centigrade.

8. Avoid flash

Avoid flash light during photography also save a major portion of battery power. Flash light consume a lot of power, to turn off the flash in day.

9. Recharge your battery

It is good to recharge your phone properly and recharge the battery when three fourth of the battery has been used up.

10. Go for genuine parts

A lot of third-party manufacturers sell batteries that are compatible with today’s popular brands like Nokia, Sony Ericsson and the like. But be sure about the life of any battery by getting original parts.

How to Unlock Mobile Phones - Mobile Unlocker

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:33:00 +0000

HERE i'm posting an utility for unlocking Nokia, Siemens, Samsung, Vitel, Maxel, Panasonic, Motorola, LG, and AEG mobile phones. This utility also includes MasterCode calculator that can reset your Nokia security code if you have lost it.

WorldUnlock Codes Calculator features:

Unlock Nokia
Unlock LG
Unlock Panasonic
Unlock Maxon
Unlock Samsung
Unlock AEG/Telital
Unlock Alcatel
Unlock Siemens
Unlock Sony
Unlock Vitel

Easy guide to free Nokia unlocking:

(Please read the whole guide before starting)

Select phone model from list.

2. Enter IMEI number of your phone (Press *#06# on phone)
Select country and service provider where the phone was bought.
Hit the button: Calculate!
The software generate some Nokia unlock codes.
If 7 codes are displayed, use the code ending with +7 first.
If it does not work, then try +1, and finaly +5.
When phone displays "Sim restriction off" it is unlocked.
If only two codes are displayed (+1 and +2) enter both of them!

Codes will be shown on the form: #pw+CODE+n#
To get p, w or +, pres the * button several times.

You enter the codes correctly by removing any simcard from the phone, turning the phone on and then enter the code.

Download WorldUnlock Codes Calculator

How to Hack Into a Windows XP Computer Without Changing Password

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:26:00 +0000

Another method to login to a password protected Windows even if you do not have the password is by making Windows accepting any passwords.

There is a far better way to get into Windows XP. It is easy and it does not reset the password. Hack into a computer running Windows XP without changing the password and find out all and any passwords on the machine (including admin accounts). You do not need access to any accounts to do this. Of course, do not do this on anyone elses computer without proper authorization.
Steps to Hack into a Windows XP Computer without changing password:

1. Get physical access to the machine. Remember that it must have a CD or DVD drive.
2.Download this archive file (Size: 4.5 Mb).
3. Unzip the downloaded PCHaCKs-DreamPack.zip and you’ll get dpl.ISO.
4. Use any burning program that can burn ISO images like UltraISO, PowerISO or Nero.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press “R” to install DreamPackPL.
7. Press “C” to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is “1″ if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
“ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld” (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
“copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll” (without quotes and assuming your CD drive is D:)
11. Type “exit”, take out disk and reboot.
12. In the password field, type “dreamon” (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.

14. Go to commands and enable the options and enable the god command.

15. Type “god” in the password field to get in Windows.

You can also go to Passwords and select “Logon with wrong password and hash”. This option allows you to login with ANY password.

Note: I was unable to bring up the DreamPackPL for the first time because I have Kaspersky Anti-Virus already running in background. I believe most antivirus already labeled this tool as a Hack-Tool. A Hack-Tool is NOT a virus. DreamPackPL helps you bypass the Windows Login screen and it is not destructive.

Best and fast way to Lock your computer

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:21:00 +0000

Lock My PC™ is an easy in use, powerful and compact tool to lock your computer from unauthorized use. When you leave your computer unattended, the program disables the hot keys (including Ctrl+Alt+Del), mouse, locks CD/DVD ROM doors and displays a lock screen. Nobody can access your system without providing the correct unlock password.

Unlike another similar computer lock software that cannot lock Ctrl+Alt+Del on a computer running Windows XP, our Lock My PC runs own keyboard driver to block such key combinations. Moreover, bulletproof startup lock guarantee that when your computer locaked at startup, this lock cannot be bypassed even in safe mode!

Why Lock My PC ?
You don't like snoopers. They are always prying into your e-mail messages, programs, data, files, etc. Lock My PC allows you to lock your computer with a password while you leave it unattended. You can lock your computer manually, with a menu or hotkey, or set up auto lock when your computer is idle.

Features and benefits:

Quick and safe computer lock by hot key, or mouse click
Autolock when computer is idle
Correct Ctrl+Alt+Del lock
Bulletproof startup lock (couldn't be bypassed in safe mode)
Different installation mode - setup for home or corporate use
CD/DVD-ROM doors lock
Multi-user support
Multimonitor support
Auto turnoff when computer is locked for a long time
Blind password option
Stealth mode
Windows XP x64 compatibility
Custom lock screens
Cycling lock screen images
Screen saving effects
Lock screen transparency - you can view movies under the locked screen
Password protected settings, quit and uninstall
Command line options
and many more ...

Difference from standard Windows XP computer lock feature
A lot of users believe that Lock My PC (as well as any other third party computer lock software) is useless because Windows XP has integrated computer lock feature. Well, indeed, you can simply press Win+L on Windows XP computer keyboard and your screen will be safely locked. What advantages Lock My PC has over Windows computer lock?

First of all, when your computer is locked by Windows Lock feature, anyone who has Windows Administrative privileges can unlock your computer. Such unlock will force to close your session (all unsaved changes will be lost). If Welcome screen option is enabled on your computer (the default settings for non-domain computer), Win+L doesn't lock the computer at all - it temporary switches the user off and displays the welcome screen - if you share your computer with others, they can logon with their usernames and use your computer. Moreover, if you share your account with other users (it's common for home PC), Windows XP lock feature is useless at all - your folks will unlock your computer without any problem.

Another benefits of Lock My PC in comare with Windows lock feature:

Custom lock screens and transparent lock screen options - your computer can be used as a presentation machine - the screen displays pictures or video, but nobody can touch your computer;
Secure Lock before Windows welcome/logon screen;
Displaying unsuccesfull unlock attempts - you will be notified if anyone tried to unlock your computer;
If Lock My PC is used in muilti-user mode, a supervisor can unlock the computer without closing user session;
You can lock CD/DVD ROM doors along with the desktop, keyboard and mouse - this can prevent CD media from being stolen while you are out;
Command line support allows you to use Lock My PC in Internet kiosks.

Safe and secure
Lock My PC provides reliable locking mechanism that impossible to bypass:
Keyboard driver installed with Lock My PC blocks different key combinations like Ctrl+Alt+Del, Alt+Tab, Ctrl+Esc and many others.
Booletproof startup lock ("Always lock at startup" option) displays password prompt box before Windows logon/welcome screen and (unlikle the most of desktop locking software) bannot be bypassed in Windows safe mode.

Easy to use
As soon as the installation completed, double click on the Lock My PC tray icon to lock the computer.
Right click on the tray icon to get access to the program settings. All settings are groupped by cathegoriies.

Autolock computer after certain time of inactivity
You can set up Lock My PC to lock your desktop automatically if the computer is idle during a certain period of time. Moreover you can set up Lock My PC to switch the computer off (Hibernate, Standby etc.) if your computer was locked during a certain period of time.

Stealth mode
Lock My PC can work in stealth mode. Stealth mode is a state when the program is running on your computer but does not show any sign of its presence in memory. To activate stealth mode, enable options "Do not show tray icon at startup" and "Hide Lock My PC from Task Manager".

Two installation modes
Lock My PC can be used both in single-user and multi-user environment. During the installation process, you will instruct Setup wehter to install Lock My PC in single-user mode or in multi-user mode.
In single-user mode, Setup will create Lock My PC shortcuts only for you. Locked computer can be unlocked only with your password. Some advanced options for corporate use will be blocked. This mode is ideal for home use.
In multi-user mode, Setup will create Lock My PC shortcuts for all user accounts. Each Lock My PC user will have their own password. The user who installed Lock My PC will be Lock My PC Administrator and his/her password - the administator's password. This mode is ideal for corporate use.

Custom Lock Screens
Lock My PC comes with a set of different lock screens. Lock screens are located in LockScreens subfolder of Lock My PC program folder.
You can create your own Lock Screen pictures and use them with Lock My PC. Your computer will look cool and unique when it is locked. You can use GIF, JPEG, BMP and animated GIF images as lock screens. Lock Screen transparency level option will allow you to vary the transparency from fully opaque to fully transparent. The latter allows you to lock keyboard and mouse only and may be helpful when you are watching videos or running presentations on your PC.

Disabling Vista’s User Account Control (UAC)

noreply@blogger.com (Paresh Modi) — Thu, 10 Jun 2010 06:02:00 +0000

User Account Control (UAC) is a feature in Windows Vista that can help prevent unauthorized changes to your computer. UAC does this by asking you for permission or an administrator* password before performing actions that could potentially affect your computer's operation or that change settings that affect other users.

UAC will alert you with one of the following messages:

Windows needs your permission to continue

A Windows function or program that can affect other users of this computer needs your permission to start. Make sure to ensure that it's a function or program you want to run.

A program needs your permission to continue

This will happen when a program that's not part of Windows needs your permission to start. It has a valid digital signature indicating its name and its publisher, which helps to ensure that the program is what it claims to be. Make sure that this is a program that you intended to run.

An unidentified program wants access to your computer

This is caused by a program that your administrator has specifically blocked from running on your computer is trying to run. To run this program, you must have an administrator unblock it.

The main reason to use UAC is to prevent malware and spyware from installing or making changes to your computer without your permission. This comes in handy when you have users who may go to inappropriate websites or download software from the Internet that may be of risk to their computer. If you trust your users or if its just you that will be using your computer and you are confident that you will not be installing anything you shouldn’t then you can turn this feature off.

Here is how you turn the User Account Control feature off:

Open User Accounts from Control Panel.
Click on turn User Account Control on or off.
Uncheck the box that says Use User Account Control (UAC) to help protect your computer.
Click Ok. You may have to enter administrator credentials depending on who you are logged in as.
Restart your computer for the changes to take effect.

How to Change Your IP Adress and Surf The Web Anonymously

noreply@blogger.com (Paresh Modi) — Wed, 12 May 2010 06:28:00 +0000

Download Invisible IP Map to surf anonymously in internet. Hide your IP and encrypt your connection.

Previously i've posted "How to find the IP address of the email sender in Yahoo! Mail" and "How to Track the location of an IP address". In this article i'm going to show you a software, Invisible IP Map, that can make you be "anywhere" in world. People that hack sites will need this small baby to help em on the way. This tool will put you in selected location all around the world XD.

Invisible IP Map is user-friendly software that masks your real location. Every computer that is connected to the Internet has its own IP address which could easily be located on a map. This program will help you show yourself like you are surfing from another place on the planet.

Product Information:

This is a Mask IP software which is used to change your real Internet address while browsing. The software will deliver you fresh anonymous proxy servers every time you decide to click on "Get IP Locations". The main benefit of this software is that you can't be traced when browsing websites. Also if a website is restricted for users from specified country the program can bypass that protection. By hiding your IP you will prevent receiving spam from marketers which know your interests by tracking your IP when browsing websites. You can use web based e-mail to send anonymous e-mail. Post on bulletin boards without displaying your real IP address.

Main Screens:

Map Menu: This is they key part of the software. Here you can change your IP address, retreive IP locations, get information about your IP location or the location of the other server. In addition, you can recheck the servers.
IP Information: This screen will give you all the information about your IP and the remote IP. You can see information such as city, region, country, distance between you and the remote server, server type, timeout etc.
Custom proxy checker: The proxy checker is specially designed for those of you who have own proxy lists. You can add them to the checker and check whether they are working.
VIP Servers: This is optional add-on for Invisible IP Map software. The VIP servers will give you a high-speed internet access with 128 Bit SSL encryption.

Download Invisible IP Map

How To Activate :

1. Replace the original "Options.ini" in the program files folder with the one in the RAR (downloaded one ) and then open the program again. Don't use the details in the ini.

2. After doing that here are the results:

Serial Number for Invisible IP Map:

NAME: SIR_WILLIAMZ
EMAIL: SIRWILLIAMZ@YAHOO.CA
SERIAL: 00822631340408026

This is a very great software and i recommend you to try it. Enjoy .

How to Hack AIM Account Password

noreply@blogger.com (Paresh Modi) — Wed, 12 May 2010 05:33:00 +0000

Hacking AIM / AOL Account Username and Password using AIM Phishing

I've been posting a lot about Phishing and Keylogging on this blog. Basically these two methods are most used for hacking email accounts. Here i'll show you how to hack AIM Username and Password using Phishing. Basically a phisher is a fake login page, that is made to look exactly like the real login page of the real website so as to fool somebody into entering their information and sending it to you.

How To Hack AIM Account Password?

1. First of all Download AIM Phisher.

2. The downloaded file contains:
aim.html
next.php
pass.txt
3. Upload all of the files to any free webhost site like:
www.yourfreehosting.net
www.esmartstart.com
www.110mb.com
www.drivehq.com
www.t35.com
www.ripway.com
www.superfreehost.info
www.freehostia.com
www.funpic.de
www.freeweb7.com
4. Once you have uploaded the files in the directory, send this phisher link (aim.html) to your victim and make him login to his AIM account using your sent Phisher.

5. Once he logs in to his AIM account using Phisher, all his typed AIM id and password is stored in "pass.txt".

6. Now, open pass.txt to get hacked AIM id and password as shown.

That's all. If you have any problems using phishing or want to know more about it, read my articles What is Phishing and how to use it for hacking? and Learn Everything About Phishing

Happy Hacking !

Do you have questions, comments, or suggestions? Feel free to post a comment!

How to Install RAM / Memory inside your PC

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 15:11:00 +0000

The Best Upgrade you can give to boost your PCs performance

How to install RAM – Safety first
Ok here is our simple guide to how to install RAM.
This has to be one of the easiest upgrades that you can give to boost the performance of a flagging PC – and one of the cheapest too!
But before we go anywhere near that ailing PC, we must consider a few precautions first.
Memory is easy to install but you do need to handle those new sticks of RAM with care.
Memory or RAM (Random Access Memory), as it is usually referred to, is extremely sensitive to zapping by static electricity and needs to be handled correctly to prevent unseen damage occurring.
Make sure that you install your RAM with your PC sitting on a flat surface, a table top or desk will be fine, and avoid working on a carpet or surface where you may build up a static charge and accidentally zap your memory when you install it in your PC.
Preferably wear an anti-static strap to ensure that you do not build a static charge but if you haven’t got one to hand you can ground yourself by touching something that is connected to a good earth.
Your PC case will be fine but make sure that the power supply is OFF at the wall socket before attempting to open your PC case and certainly before adding your new RAM!
Always handle memory sticks by the edges of the PCB and avoid contact with the components and exposed pins and edge connector.
How to Install RAM – PC Preparation
Lie your PC flat on its side and remove the side of your PC case by removal of the screws at rear of the side panel and sliding the cover away (some cases may have sliding catches to release the side panels in place of or as well as screws).
Locate the PC memory sockets which will be somewhere close by the processor.
If you are not installing memory in a new PC build but simply replacing old with new then you will need to remove your old memory first.
To do this you will need to unclip the brackets on either side of your memory modules by pushing the clips outwards away from the modules.
The module will then be lifted out of the socket by the action of lugs attached to the inside edge of the clips.
How to Install RAM – Module Fitment
Ensure the clips at either end of the memory socket are ready to receive the new modules i.e. clips angled away from the socket.
Your memory module will only fit in one way round.
If you examine the socket on the motherboard you will see that there is an offset blanking strip in the socket which together with a matching slot in the memory module edge connector will ensure correct orientation.
Gently guide the memory module into the socket and carefully push home.
The clips will close around the ends of the module as you push your RAM into the socket.
This will require a reasonable amount of force; make sure it is the correct way around before pushing too hard.
The clips will lock into place (the clips have lugs that locate into slots at the end of the memory modules) but check by pushing in from the side with your fingers to confirm they are seated fully.
How to Install RAM – Dual Channel
Most new motherboards support dual channel memory and if you have purchased two modules, i.e. 2 x 1GB sticks of memory then you should ensure that you install your memory sticks correctly to take advantage of this feature which will provide you with a significant performance boost.
Note that you will obtain better performance with two smaller identical sticks rather than one large one (i.e. two lots of 1GB rather than a single 2GB stick of RAM).
To do this you will need to ensure that your modules are inserted in sockets of the same color. Your dual channel compatible motherboard RAM sockets will be color coded to help easily identify which slots to populate for dual channel operation.
Check your motherboard manual to see if you need to populate a particular color first, i.e. both yellow sockets first etc.
If you have four identical sticks of RAM and there are only four slots then obviously it doesn’t matter!
Here is our example motherboard – you can see that there are two banks of color coded sockets. The manual instructs us to install the first stick of RAM in the first yellow socket. If we have a second identical stick we need to install it in the second yellow socket to achieve our dual channel operation.
You may only have one stick and if this is the case just fit it in the first socket as directed. This is an opportunity for an upgrade at a later date to obtain a performance boost.
How to Install RAM – Finishing Off
With our RAM installed we can re-fit the case side and power up our PC.
Your RAM will be detected by the system BIOS when you power up your PC.
Check that the correct amount of memory is displayed during POST (Power On Self Test).
If not you will need to check that your memory modules are seated in the sockets correctly.

How to Install Windows XP

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 14:36:00 +0000

Comprehensive Guide to How to Install Windows XP

How to Install Windows XP – Introduction

You may wish to install Windows XP instead of the more recent Windows Vista or Windows 7 offerings from Microsoft.
Perhaps you already own the software and do not want to upgrade to Windows Vista or Windows 7 or maybe you have programs that will not run under these newer operating systems or drivers/games etc that are not approved by Windows Vista or Windows 7.
Whatever the reason, we will now examine how to install Windows XP. There are two main versions of Windows XP and this guide covers how to install Windows XP in both of these variants, although the guide does use the Windows XP Professional version for the screenshots etc.If you are building a new PC then you can purchase an OEM version of Windows XP.You will find this a much cheaper alternative to the full retail version, the only difference being the lack of telephone or any technical support.Mountains of support is available on the internet for any problem you are likely to come up against though and unless you really want to pay for this we would strongly recommend that you stick with the OEM version.If you are constructing a new PC then you will already be performing a clean installation but if you are simply upgrading or re-installing we would still always recommend a clean installation of Windows XP rather than an upgrade or re-install over your current Windows XP installation.Why? Well, any problems you may have with your current installation may still be there after you re-install / upgrade and some applications may not work correctly requiring you to re-install these anyway.A clean installation will get rid of any ‘bloatware’ that will undoubtedly have accrued in your installation.A clean installation will require that you back up all your files and folders as a clean install will wipe your hard drive of everything including your settings and programs.If you are re-installing then do please ensure that you have separately backed up any documents, photos and music files etc that you simply cannot afford to lose to a safe medium that you are sure you can restore from. See our page on Data Backup to avoid any potential disasters. Once you’ve lost it it’s gone for good you know!!
How to Install Windows XP – Installation
You can boot directly from your Windows XP CD. Insert the XP Installation CD into your optical drive and the installation should begin.Note that you may need to enter your PC BIOS to change the order of boot devices if you are re-installing otherwise your PC may simply start up with your current version of Windows.The BIOS can be accessed at start up by pressing the Del, F1, F2 or ESC key dependant upon your BIOS version and manufacturer.Set your BIOS so that the first boot device is your CD/DVD drive and insert the Windows XP CD in the drive ready.
Hit ‘Save Configuration’ after setting up your BIOS and the system should now boot from the Windows XP CD.
You will now see a ‘Press any key to boot from CD’ message
Just press ‘Enter’ to proceed with setting up our installation of Windows XP.
You will then be asked to ‘Press F6 if you need to install a third party SCSI or RAID driver’. If you are installing on a SATA type drive set to run in a RAID configuration or in AHCI mode rather than IDE mode then you will need to press F6 at this point and load the required drivers.
To set up your SATA, RAID array or AHCI now, you will need a floppy disk with the appropriate drivers installed.
You will find these drivers on your motherboard CD or if not you can download them from the motherboard manufacturers website and copy them on to a floppy disk.
Of course in order to install these you must have a 3.5” floppy disk drive installed or have one available that you can temporarily connect up during the installation process.
You will not need to properly install the floppy drive inside your PC case if you do not want to, just connect up the power and floppy ribbon cable to the PSU and motherboard and allow your BIOS to detect it.
Allow the installation to finish and at the next power down, should you so wish, you can disconnect and remove the floppy drive and cables and reboot your PC.
The next screen will ask you to press F2 if you wish to perform an Automated System Recovery (ASR) – just ignore this and wait for setup to carry on and load all the relevant files.
After all of the files and drivers are loaded the Windows ‘Welcome to Setup’ screen will appear.
Press ‘Enter’ to continue with the Windows XP setup.
You will now be asked to accept the license agreement, if you agree with the terms - press ‘F8’ to do so.
Okay you should now see the next screen inviting you to install Windows XP on your Hard disk drive.
As we have a new hard drive you will see that the drive is listed as ‘unpartitioned’
To create a partition for Windows to be installed on press the ‘C’ key
Now select / highlight your drive partition you created and press ‘Enter’ to continue installing Windows XP on this drive.
Windows will now tell you that your partition requires formatting.
Windows XP works best on an NTFS file system and you should select this and press ‘Enter’ again.
Do not choose the ‘quick option’ as this bypasses important disk physical integrity checks.
Note that if the hard disk has previously been formatted with the older FAT16 or FAT 32 type formats, Windows XP will present options to convert the file system. You should always opt for the newer, more stable NTFS file format where possible.
You should now see a screen stating ‘Set up is Formatting’ together with a percentage complete status bar.
After Windows XP has finished formatting your drive, set up will begin copying files to your hard drive.
Once this is completed it will reboot automatically and present you with the following screen indicating that setup is initializing your Windows XP configuration.
This will all take sometime and you may wish to go and get a coffee whilst waiting!!
Your PC will eventually perform a restart and the prettier part of the installation procedure will begin leaving the text type format behind.
Windows will inform you that it is ‘Collecting information’, performing a ‘Dynamic update’ and ‘Preparing installation’ whilst simultaneously telling you all about the new features you will discover with your operating system.
Just sit tight until you are asked to confirm your ‘Regional and Language Options’.
You will more than likely just click next at this point unless you should wish to change your region or language.
Clicking on the ‘Customize’ button will allow you to change your input language, keyboard layout, numbers, dates, currency, etc if you should wish to – just click on ‘Next’ when you have finished.
Following this you are invited to type in your name and organization. For home use just enter your name and click on the ‘Next’ button - note that you have to enter a name but the Organization box can be left blank.
Now you will need to enter the 25 digit alpha-numeric key code which you should find on the back of your CD wallet.
A name will now be required for your computer so that it can be identified on your network. This must be a unique name so that there is no conflict with other network users.
You may leave the ‘Administrator password’ blank if you wish but it will be much more secure if you do opt to allocate a password for much greater security.
Next configure the date and time and tick the ‘Automatically adjust clock for daylight saving changes’ box. Click the ‘Next’ button to continue.
Windows XP will now continue on with preparing the installation and you must wait patiently for a little while longer.
Finally you will be asked to select your ‘Networking Settings’.
If you are proposing setting up a home network ‘Workgroup’; or as a standalone computer you should select the ‘Typical settings’ and then click the ‘Next’ button.
Now on to the ‘Workgroup or Computer Domain’ page. For a typical home computer network you should select ‘No, this computer is not on a network, or is on a network without a domain. Make this computer a member of the following workgroup’. You can leave the default ‘WORKGROUP’ or change this to be the same workgroup name as the rest of the computers on your home network if that is called something different. Remember that different versions of Windows may use different workgroup names.
Do not worry too much here as you can change all these settings later on if you should wish.
Windows will carry on setting up on its own now with no need for any intervention by you. Eventually your PC will restart and you will see the Windows XP splash screen.
Next you will see the ‘Welcome to Microsoft Windows’ screen – click ‘Next’ to continue.
Windows checks your internet connectivity and then asks you if the computer will connect to the internet through a network?
If you have a home network that this computer will connect to you should select ‘Yes’ but if you are connecting directly to the internet through a modem then you select ‘No’. Click ‘Next’ to continue.
You will now be given the opportunity to register and activate your Windows XP installation. Most of you should select yes as the easiest option. Again, click ‘Next’ to continue.
Set up should now finalize the installation and reboot again. Upon reboot Windows will ask if you would like to improve the appearance by adjusting your screen resolution, click ‘Okay’.
Click ‘Ok’ again to accept the screen resolution adjustment.
You will now be asked to enter the user names of your computer so that each user can have their own customized profile. You only need to enter one name in order to proceed. Enter the details as required and click ‘Next’ to continue.
Windows will now ‘Thank you!’ and you should click ‘Finish’ to complete the installation.
A ‘Welcome’ screen will appear briefly…..
Then you should now see the default Windows XP desktop screen
Congratulations! You are up and running.
You should now take some time to update your operating system, protect yourself from viruses and potential hackers and install the latest drivers for your motherboard, graphics card and sound card etc.
How to Install Windows XP – Internet First Stop
When you do connect to the Internet, the first thing you must do is visit Microsoft Update. Here you need to download the latest patches and updates for your operating system, especially the security updates!You can access this easily from your Start menu. Go Start > All programs > Windows Update to be taken directed straight to the Windows Update webpage.Here you will be invited to check your PC for the latest updates. You should set your PC to allow Automatic Updates so that you are automatically kept up to date with the latest software patches and security updates.
Ensure that when you check and install updates that you also install Windows XP Service Pack 2 and 3 for full security protection of your PC
How to Install Windows XP – Setting up your New Computer
Your new computer is up and running but there is a number of things that you need to do before you can put your PC to good use.
How to Install Windows XP – Drivers
First off we need to install the correct drivers for the motherboard, graphics card etc.The best advice is to see if you can go to the motherboard, graphics card etc manufacturer web site and then search for your model number. When you get to the details for your device there should be an option to download the latest drivers for your particular operating system. Download these and burn to a disk or copy to a USB stick ready for installation on your new PC.
To confirm that all of your drivers have been installed correctly go to ‘Start’ > ‘Control Panel’ > ‘System Properties’ > ‘Hardware’ > ‘Device Manager’.
You will now be shown a list of all of your installed hardware devices. Click on the ‘+’ sign next to each item of hardware to see full details and look for any yellow exclamation marks that would indicate if the driver is not installed or working correctly.If you find any exclamation marks then simply double click on the device and then select ‘Driver’ where you will be given the option to update the drivers for this device.
How to Install Windows XP – Anti Virus Protection
Before you go anywhere on the Internet you will need to install some form of anti-virus software. The Internet is rife with Viruses, Trojans, Spyware etc and you would be surprised at how quickly your PC will become infected if you do not have any protection.We at PC Tips and Tricks use Norton Internet Security which is a package containing anti-virus, firewall, anti-spyware and hacker protection all in one package.There are other companies providing similar packages such as Kaspersky, Bit Defender, McAfee and Panda to name but a few.
How to Install Windows XP – Firewall
It is a sad fact that the Internet is a haven for malicious individuals who would delight in causing havoc and damage to your PC if the opportunity arose.Windows XP comes with its own firewall protection and if you do not have another product installed providing you with protection then you should ensure that the Windows Firewall is turned on. It should automatically be on by default but it is worth checking.
How to Install Windows XP – Recommended Protection
Again, as stated earlier, we at www.pc-tips-and-tricks.com use Norton Internet Security, which in its latest guise provides excellent all round protection.There are also a number of free anti-virus and firewall providers available and many people have found them to give extremely good performance. A very popular firewall protection program that can be obtained for free use is Zone Alarm.For anti-virus protection you could look at AVG Anti-Virus.
How to Install Windows XP – Before Connecting to the Internet
So, you have been warned! Do not connect to the internet without installing an anti-virus program and ensuring that you have a firewall set up to protect you from hackers and the like.
How to Install Windows XP – Anti Spyware
Spyware programs install themselves silently on your PC without you realizing just by paying a visit to the right (or wrong!) website.
These programs will monitor your browsing habits and history and other details and report back to their user. Some programs will install automatic pop-up adverts, which will become highly annoying and disruptive to your Internet usage.We at PC Tips and Tricks recommend the use of Spyware and advert blocking / destroying software provided by the following two companies.
Spybot Search & Destroy ( www.safer-networking.org )Ad-aware ( www.lavasoftusa.com )
Both of these are free to use and should be used as part of your on-line protection arsenal together with your anti-virus (mandatory) and firewall (also mandatory!).
How to Install Windows XP – Free Software
If you intend using your PC for word processing and database etc then you will need to purchase an office suite such as Microsoft Office. This is an excellent application but can be very expensive and you may wish to consider one of the free alternatives available.An exceptionally good free office suite is available for download at www.openoffice.org.Open Office is compatible with Microsoft Office and you will be able to open Word and Excel documents and work on them and then save in a compatible format all for free! Go on-line and look at the reviews; it really is an excellent alternative to Microsoft Office.

Secure Yourself from Hackers & Hijackers

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 14:18:00 +0000

1. Clearing the Page File at Shutdown
Windows 2000/XP paging file (Sometimes called the Swap File) can contain sensitive information such as plaintext passwords. Someone capable of accessing your system could scan that file and find its information. You can force windows to clear out this file.

In the registry navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management and add or edit the DWORD ClearPageFileAtShutdown. Set it to 1.

Note that when you do this, the system will take much longer to shut down: a system with a really big Page File (! Gig or more) may take a minute or two longer.

2. Disable the POSIX and OS/2 Subsystem.

Windows 2000 and XP come with little-documented subsystems it at allow compatibility with UNIX and OS/2 systems These rues systems are enabled by default but so rarely used that they are best off bring disabled completely to prevent possible service hijackings.

To disable these subsystems, open the registry and navigate to HKEY LOCAL MACHINESYSTEMCurrentControlSetControlSession ManagerSubSystems. Delete the subkeys Os2 and Posix. then reboot.

3. Never leave default passwords blank.

On installation, Windows 2000 sets up an Administrator account with total system access and prompts for a password. Guess what: by default, it allows that password to be blank. If a user doesn't want to type a password, he can simply click Next and the system will be an open door for anyone who wants to log on. Always opt for a password of some kind when setting up the default account on a machine.

4. Disable the Guest account

Windows XP comes with a Guest account that's used for limited access, but it's still possible to do some damage with it. Disable it completely if you are not using it. Under Control Panel, select User Accounts, click on Guest Account and then select Turn Off the Guest Account.

5. Install Windows In a different directory.
Windows usually installs itself in the WINDOWS directory. Windows NT 4 0 and 2000 Will opt for WINNT. Many worms and other rogue programs assume this to be the case and attempt to exploit those folders files. To defeat this install Windows to another directory when you're setting it up - you can specify the name of the directory during setup. WINDIR is okay; so some people use WNDWS - A few (not that many) programs may not install properly if you install Windows to another folder but t hey are very few and they are far between

6. Fake out hackers with a dummy Administrator account
Since the default account in Windows 2000 is always named Administrator, an enterprising hacker can try to break into your system by attempting to guess the password on that account. It you never bothered to put a password on that account, say your prayers.

Rather than be a sucker to a hacker, put a password on the Administrator account it you haven't done so already. Then change the name of the Administrator account. You'll still be able to use the account under its new name, since Windows identifies user accounts by a back-end ID number rather than the name. Finally, create a new account named Administrator and disable it. This should frustrate any would -be break-ins.

You can add new accounts and change the names of existing accounts in Windows 2000 through the Local Users and Groups snap in. Right-click on My Computer, select Manager, open the Local Users and Groups subtree, look in the Users folder and right-click on any name to rename it. To add a new user, right-click on the containing folder and select New User. Finally, to disable an account, double-click it, check the Account is disabled box and click OK.

Don't ever delete the original Administrator account. Some programs refuse to install without it and you might have to log in under that account at some point to setup such software. The original Administrator account is configured with a security ID that must continue to be present in the system.

7. Set the Hosts file to read-only to prevent name hijacking.

This one's from (and to a degree, for) the experts. The HOSTS file is a text file that all flavors of Windows use to hold certain network addresses that never change. When a network name and address is placed in HOSTS, the computer uses the address listed there for that network name rather than performing a lookup (which can take time). Experts edit this file to place their most commonly-visited sites into it, speeding things up considerably.

Unfortunately hijackers and hackers also love to put their own information into it - redirecting people from their favorite sites to places they don't want to go. One of the most common entries in HOSTS is local host which is set 1770.0.1. This refers to the local machine and if this entry is damaged the computer can behave very unpredictably.

To prevent HOSTS from being hijacked, set it to read-only. Go to the folder %Systemroot%system32driversetc, right-click on HOSTS, select Properties check the Read-Only box and click OK. If you want to add your own entries to HOSTS, you can unprotect it before doing so, but always remember to set it to read-only after you're done.

8. Turn off unneeded Services

Windows 2000 and XP both come with many background services that don't need to he running most of the time: Alerter, Messenger, Server (If you're running a standalone machine with no file or printer shares), NetMeeting Remote Desktop Sharing, Remote Desktop Help Session Manager (the last two if you're not using Remote Desktop or NetMeeting), Remote Registry, Routing and Remote Access (if you're not using Remote Access), SSDP Discovery Service, Telnet, and Universal Plug and Play Device Host.

A good resource and instruction on which of these services can be disabled go to /http://www.blkviper.com/WinXP/

9. Disallow changes to IE settings through IE

This is another anti hijacker tip. IE can be set so that any changes to its settings must be performed through the Internet icon in the Control Panel, rather than through IE's own interface. Some particularly unscrupulous programs or sites try to tamper with setting by accessing the Tools, Options menu in IE. You can disable this and still make changes to IE's settings through the Control Panel.

Open the Registry and browse to HKEY_CURRENT_USER SoftwarePoliciesMicrosoftInternet ExplorerRestrictions. Create or edit a new DWORD value named NoBrowserUptions and set it to 1 (this is a per-user setting). Some third-party programs such as Spybot Search And Destroy allow you to toggle this setting.

You can also keep IE from having other programs rename its default startup page, another particularly annoying form of hijacking. Browse to HKEY.CURRENT USERSoftwarePolicies MicrosoftInternet ExploreControl Panel and add or edit a DWORD, Homepage and set it to 1.

10. Disable simple File Shares.

In Windows XP Professional, the Simple File Sharing mode is easily exploited, since it抯 a little too easy to share out a file across your LAN (or the NET at large). To turn it off, go m My Computer, click Tools, Folder Option and the View tab, and uncheck Use Simple file sharing (Recommended). Click OK. When you do this you can access the Security tab in the Properties window for all folders; set permissions for folders; and take ownership of objects (but not in XP Home)

GSM MOBILE TRICKS

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 14:13:00 +0000

All the tips and tricks provided by Hidden Tricks is free and its not necessary to sign up also.

Type *#61# and press call - Check call redirection status.

Cancel all redirections: ##002#

*43# to activate call waiting, to deactivate #43#.

If your phone doesn't have incoming call barring and outgoing call barring, you can try this. For outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial #33#barcode*#.

On any phone on any network type in **43# to enable conference calls. You can make up to 7 calls at once

If you need to block SMS reception (if you are spammed by someone) just press this code: *35*xxxx*16# xxxx is your Call Barring code (default is 0000). To remove this barring type: #35*xxxx#

If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call. (*#30# / *#31# or *31# / #31# ) Works on some networks.

Typing *0# or *nm# on the beginning of a txt message gives you detailed delivery report on some networks.. But turn off reports in message settings before.

When the sim card-pin blocked type **042*pin2 old*newpin2*newpin2*

Important:

If you know any other tips & tricks & secrets about GSM mobile or any other mobile which is not listed here then you can post in Guestbook and it will be updated soon with your name.

Warning:

You can try these codes at your own responsibility ! We are not responsible for any malfunction and we don't accept any complaints.

SONY ERICSSON MOBILE TIPS

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 14:09:00 +0000

To check Sony Ericsson mobile or cellphones IMEI (International Mobile Equipment Identity)

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code of your sony ericsson Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your sony ericsson Phone
SP = Spare

Other secret tricks for sony ericsson mobile or cellphone

Sony Ericsson Secret Menu:
> * < < * < * > means press joystick or arrow keys to right
< means press joystick or arrow keys to left 1. push joy stick to RIGHT once 2. press * 3. push joy stick to LEFT twice 4. press * 5. push joy stick to LEFT once 6. press * The Service Menu will appears containing following information !
1. Service Info
a. Software Version
b. SIMlock
c. Configuration
2. Service Setting
a. Contrast
3. Service Test
a. Display
b. LED/Illumination - *This test is very cool
c. Keyboard
d. Buzzer
e. Vibrator
f. Earphone
g. Microphone
h. Real Time Clock
i. Joystick Counter*

Lockstatus: < * * <

Shortcut to last dialed numbers: 0#

Shortcut to sim numbers: On main menu type a number and press #

If you change the language from default to any other language, then it may be difficult to switch to default language.
The shortcut is very simple. Just press <>
<> stands for right arrow button or joystick.

Secret Games: Snake on the T68
Go to Erix and then on the main screen press 123 and you will be taken to the game.

Secret Message:
On Tetris on the main screen when the blocks are falling press 397 and a message will appear.

SECRET PRANK

Change closed caller group (settings >security settings>user groups) to 00000 and your phone will sound the message tone when you are near a radar speed trap.
Setting it to 500 will cause your phone 2 set off security alarms at shop exits.
Try this secret trick if you can handle the unexpected.
Note: This secret trick wont work with all phones Models.

THE DETECTIVE TRICK (Mobile Spying)

Now you can spy on anyone using your cellphone. Just do the following.

Activate the "Automatic Answer" in the headset profile of your cellphone and set the ringing volume to "Mute"
Short-circuit the left middle and right pins on the bottom of the mobile phone with all connections touching each other this will activate profile "Headset".
If you cant do this just keep your earphone connected to mobile.
Now place it under a table in a room and call it. Now you can use your phone for checking out what people are talking about in a room. Just call on your phone.
The phone receives the call without ringing and you can listen to what people are saying.

MOTOROLA MOBILE TIPS

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 14:04:00 +0000

To check Motorola mobile or cellphones IMEI (International Mobile Equipment Identity)

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code of your motorola Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your motorola Phone
SP = Spare

Other secret tricks for motorola mobile or cellphone

Code to lock keys. Press together *7

Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []

Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []

Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []

Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []

Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []

Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []

Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []

Enable EFR:
[] [] [] 1 1 9 [] 1 []

Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []

Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []

You can change GSM frequencies to 900/1800 by entering the enginnering model.
Following the below steps:
enter menu and press 048263* quickly,
then you will enter the secret engineering menu under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650,
press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.
press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.
You will receive an extra 50 msgs memory space.Switch phone off and back on.

SECRET PRANK

THE DETECTIVE TRICK (Mobile Spying)

Now you can spy on anyone using your cellphone. Just do the following.

Activate the "Automatic Answer" in the headset profile of your cellphone and set the ringing volume to "Mute"
Short-circuit the left middle and right pins on the bottom of the mobile phone with all connections touching each other this will activate profile "Headset".
If you cant do this just keep your earphone connected to mobile.
Now place it under a table in a room and call it. Now you can use your phone for checking out what people are talking about in a room. Just call on your phone.
The phone receives the call without ringing and you can listen to what people are saying.

SAMSUNG MOBILE TIPS

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 13:59:00 +0000

To check Samsung mobile or cellphones IMEI (International Mobile Equipment Identity)

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code of your samsung Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your samsung Phone
SP = Spare

Other secret tricks for samsung mobile or cellphone

If you have downloaded corrupted or incompatible Java midlets or other media,
which are causing problems with the phone, try this
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

The master reset code is:
#*7728#
This will not delete anything from your
mobile phone, but set each and eveything to its
default/standard setting as it was on the time of purchase.

To unlock your phone put a sim from another company,
now type *#9998*3323# it will reset your phone. Push exit and then push 7,
it will reset again. Put your other sim in and it will say sim lock,
type in 00000000 then it should be unlocked. Type in *0141# then
the green call batton and it's unlocked to all networks.
This code may not work on the older phones and some of the newer phones.
If it doesn't work you will have to reset your phone without a sim in it
by typing *#2767*2878# or *#9998*3855# (not tested)

Other Samsung Codes
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On

SECRET PRANK

THE DETECTIVE TRICK (Mobile Spying)

Now you can spy on anyone using your cellphone. Just do the following.

Activate the "Automatic Answer" in the headset profile of your cellphone and set the ringing volume to "Mute"
Short-circuit the left middle and right pins on the bottom of the mobile phone with all connections touching each other this will activate profile "Headset".
If you cant do this just keep your earphone connected to mobile.
Now place it under a table in a room and call it. Now you can use your phone for checking out what people are talking about in a room. Just call on your phone.
The phone receives the call without ringing and you can listen to what people are saying.

LG MOBILE TIPS

noreply@blogger.com (Paresh Modi) — Mon, 10 May 2010 13:21:00 +0000

To check LG mobile or cellphones IMEI (International Mobile Equipment Identity)

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code of your LG Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your LG Phone
SP = Spare

Other secret tricks for LG mobile or cellphone

LG all models test mode:
Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*

LG-U81XX SPECIAL CODES
Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM

- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'

Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*

SECRET PRANK

THE DETECTIVE TRICK (Mobile Spying)

Now you can spy on anyone using your cellphone. Just do the following.

Activate the "Automatic Answer" in the headset profile of your cellphone and set the ringing volume to "Mute"
Short-circuit the left middle and right pins on the bottom of the mobile phone with all connections touching each other this will activate profile "Headset".
If you cant do this just keep your earphone connected to mobile.
Now place it under a table in a room and call it. Now you can use your phone for checking out what people are talking about in a room. Just call on your phone.
The phone receives the call without ringing and you can listen to what people are saying.

How to Remove Entering of Serial Key in Windows XP Setup

noreply@blogger.com (Paresh Modi) — Fri, 07 May 2010 06:23:00 +0000

When you manually install Windows XP to several computers with different specifications. Instead of inputting the License Key in every computer, Make it Automatic Insert like OEM Installation Disc!

Tested in Windows XP Service Pack 2 and 3

[UserData]
ProductKey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

[Data]
MSDosInitiated=0
UnattendedInstall=Yes

Tested in Windows XP Service Pack 1

[UserData]
ProductKey="XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"

[Data]
MSDosInitiated=0
UnattendedInstall=Yes

Open your notepad, copy-paste the settings above, input your Product Key and save it as Winnt.sif to I386 Folder of your Windows XP Installation Disc by creating an ISO image and editing the file using any ISO Editor.

Normal Mistake: Winnt.sif.txt, uncheck "Hide Extension for known file types" in Windows Explorer > Tools Menu > Folder Options > View Tab

Sorry... I can't find any Free ISO Editor for Windows. Please tell me If you find one :)

WORKAROUND:

Create a duplicate or a copy of your Windows XP Installer and do not finalize the burning of the disc. In short, make a multi-session disc.

Example using CDBurnerXP:

After creating a copy as multisession disc, Re-open CDBurnerXP and choose Data Disc > Open the drive and re-insert the disc for adding more files.

Adding winnt.sif to I386 Folder:

Continue Multisession Disc

Drag the File to I386 Folder and Start Burning!

Tip: You can also put your must have Softwares in the Installation Disc. Great for Computer Technicians!

Creating a Windows XP Unattended Installer

noreply@blogger.com (Paresh Modi) — Fri, 07 May 2010 06:16:00 +0000

This is an old guide but still very useful and deserve a descent update. I'm shock that many people still doesn't know about this small utility that can be found in their Windows XP Installer.

"Lawrence, It's almost two months now since you release the latest update of your software winbubble, do you have new releases coming soon? anyway, I have a question. How do I automate the installation of Windows XP? - Jared"

WinBubble is still in development and I'm still Shaping my skills. Surely, Everybody will benefit from my studies and Please stay tuned always. Thanks in advance.

Ok, Let's go back from the main topic. Open your Windows XP Installer and explore the following path: [Disc]SUPPORT\TOOLS

Note: I recommend to download the latest one for Windows XP Service Pack 3, Download here

According to Microsoft the latest deploy.cab supports:

Windows XP; Windows XP Service Pack 1; Windows XP Service Pack 2; Windows XP Service Pack 3

1. Copy the file Deploy.cab to any directory and Extract the files...

2. Click the Useful utility setupmgr.exe and if your using Windows Vista Run the File as Administrator.

3. Follow the Pictures below:

Now, you can enter your Name, Organization, Time Zone, Administrator Password, Display Settings, Product Key, Networking and other settings.

Note: In Windows Vista OS, Don't Set the Time Zone... Just proceed byClicking to the other options.

Go to the location where you save the file Unattended.txt andRename to WINNT.SIF and Place to I386 Folder of your Installer.

I made some Template if you don't want to use the software.

[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=ProvideDefault
OemPreinstall=No
TargetPath=\WINDOWS

[GuiUnattended]
AdminPassword="Enter_your_Passw0rd_here"
EncryptedAdminPassword=NO
AutoLogon=Yes
AutoLogonCount=1
OEMSkipRegional=1

[UserData]
ProductKey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
FullName="Enter_your_Name_here"
OrgName="HomeUser"
ComputerName= Enter_your_Computer_Name_here

[Identification]
JoinWorkgroup=WORKGROUP

[Networking]
InstallDefaultComponents=Yes

Save it as WINNT.SIF and place that to your Windows XP Installer directory I386.