Photocopy Canon Digital | Kode Error Fotokopi

How to Setting Up Your PC to Print Using Using Canon IR5000

2012-02-03T23:54:00.000+07:00

Before starting the first Please go to Canon's website to download the printer driver ir5000.

Downloading the driver:
http://www.usa.canon.com/html/download/imagerunner5000.html

From the list, download the appropriate driver. (e.g. If you are running Windows XP, download and run: PCL6V32W2KXP.exe)
Double click on the file, and unzip the files to a temporary directory.

Setting up the printer:

Go to Start -> Settings -> Printers (Windows 2000)
Go to Start -> Printers and Faxes (Windows XP)
Double-click on "Add Printer"
Click Next
Check "Local printer" (Windows 2000)
Check "Local printer attached to this computer" (Windows XP)
Click Next
Check "Create a new port" and select Standard TCP/IP Port on the pull-down menu.
click "Next"
You will see the "Welcome to the Add Standard TCP/IP Printer Port wizard" menu. Click "Next"
For "Printer Name or IP Address" enter: Canon Ir5000 and Click "Next"
You'll see "Completing the Add Standard TCP/IP Printer Port Wizard
SNMP: Yes
Protocol: Raw Port 9100
Device: canon ir5000
Port Name: canon ir5000
Adapter Type: Canon Network Printing Device with P9100

Click "Finish"
Another window will appear titled: "Add Printer Wizard" Select "Have Disk"
Select "Browse" and go to the directory where you unzipped the printer driver and select the driver (P62KUSAL.INF in this example.)
Then click Ok, and then OK for the "Install From Disk" window.
In "Add Printer Wizard", select Canon iR5000-6000 PCL6
Another window should appear, where you can specify a printer name. Enter: "canon ir"
You'll have the option of selecting this printer as default. Click "Next"
Select: Do not share this printer in the Print Sharing window. Click "Next"
Print a Test Page if you prefer. Click "Next"
In the "Completing the Add Printer Wizard" window, click "Finish"
You should now see canon ir in the list of printers.

Configuring the printer

Right click on the Printer and click "Properties".
Click on the "Device Settings" tab
Select "Output Options" to: Finisher-F1
Select "Puncher Unit" to: Puncher Unit-B1" Check "Job Accounting" Click Apply
(Optional: To set printing to be double-sided by default:) Go to the Advanced Tab -> Printing Defaults -> Finishing Tab -> Select Print Style to be: 2-sided Printing
Go to "Quality" Tab and set "Objective" to be Publications for best quality.
Click "Apply" and Exit.

Photocopy Canon Digital Image Processing

2012-01-30T22:56:00.000+07:00

The Photocopy Canon digital image processing and image memory are controlled by the main controller PCB. The following is a block diagram of digital image processing :

2.2 Input Image Processing

The image data from the reader unit is processed for the following:

2.2.1 Image Data from the Reader Unit

The image signals from the reader unit are 8-bit, 256-gradation intensity image signals which have been subjected to shading correction. The signals arrive from two signal lines (for even- and odd-numbered pixels).

2.2.2 Enlargement/Reduction (main scanning direction)

An image is enlarged or reduced by processing image data when writing it into or reading it from image memory.

2.2.3 Edge Emphasis

For each mode (text, text/photo, print photo, film photo), edge emphasis is executed so as to increase sharpness while suppressing moire.

2.2.4 Editing

The machine provides various editing functions: negative/positive reversal, mirror, fold.

2.2.5 Density Conversion (LUT)

In this block, the intensity image signals are converted into density image signals, and processing is executed so as to enable the best output density curve for a specific mode in question.

a. LOG Conversion

Using a LOG conversion table, intensity image signals based on reflected light are converted into density image signals based on density data.

b. Density Adjustment (F-value conversion)

The F-value table most suited to the setting of the Density key in the control panel is used to adjust the density; it, however, will not be executed in memory copy mode.

c. Density Correction (g conversion)

The g conversion table best suited to each specific mode (test, text/photo, print photo, film photo) is used to correct density.

2.2.6 Binary Processing (error diffusion method T-BIC)

In the error diffusion method (T-BIC), the texture is controlled to process the data for optimum printing effects; 8-bit image density signals of each mode (text, text/photo, print photo) are converted into 1-bit image density signals (binary).

2.2.7 Binary (dither screen method)

In the dither screen method, the texture is controlled to process the data for optimum printing effects; 8-bit image density signals for film photo mode are converted into 1-bit image density signals (binary).

Although expressed in binary, the resulting signals enable reproduction in 256 gradations (dither screening of 40×40 pixels).

2.3 Image Memory Control

The image data after binary processing is controlled for the following:

2.3.1 Compression/De-Compression, Rotation, and Enlargement/Reduction

The binary data generated as the result of the foregoing processes is subjected to the following: compression/de-compression (for electronic sorting), rotation, resolution conversion.

2.3.2 SDRAM

The image data subjected to image memory control is temporarily stored in SDRAM.

2.3.3 HDD

The HDD functioning as an image server is used to store image data for the Box function.

2.4 Output Image Processing

The output image data to the printer unit is subjected to the following processing:

2.4.1 Smoothing

a. When Generating Read Images In the case of text or test/photo mode, the input image of 600×600 dpi is converted into 1200*×600 dpi by means of smoothing.

*Equivalent.

In smoothing, image data is compared against a template consisting of several combinations of pattern matrixes for replacement of selected pixels. In addition, notch processing is also executed at the same time as a pattern unique to read image.

b. When Generating Printer (PDL) Images

The image data is subjected to the type of smoothing best suited to PDL, in which 600×600 dpi is converted into 2400*×600 dpi.

*Equivalent.

2.4.2 Binary-Binary Density Conversion (read image output only)

This processing is used as an auxiliary means for adjusting the density of images.

Download Driver Canon iR3300 Windows 7

2012-01-26T11:40:00.000+07:00

Download here drivers for Canon iR3300 for Windows 7 64-bit.

Manufacturer: Canon
Hardware: Canon iR3300
Software name: PCL5e/5c Printer Driver
Version: 8.70
File Size: 29.95Mb (31400385 bytes)
Released: 01 Dec 2009
Uploaded: 23 Mar 2010

System: Windows Vista, Windows Vista 64-bit, Windows XP, Windows XP 64-bit, Windows 2000, Windows Server 2003, Windows Server 2003 64-bit, Windows 7, Windows 7 64-bit, Windows Server 2008, Windows Server 2008 64-bit

Description:

PCL5e/5c Printer Driver for Canon iR3300
Language(s): English
Interface PDL: PCL5e & PCL5c

Download Canon iR3300 PCL5e/5c Printer Driver

Fix the lift gear cassette ir3300

2012-01-26T01:38:00.001+07:00

ir3300 lift gear cassette exchange
- Change number of parts that FB3-2856

click image to view video

ir3300 feeder cassette, lift the gear unit is a way to replace if damaged. If the paper broke teeth, although there are indications of the paper is taken. Change number of parts that FB3-2856. Gear, depending on where the Error Condition is broken, if not, you may receive.
Lift the top of the tooth has been damaged, for example by not going in the first place, but the people out of the bottom will fill the full paper in the cassette and can be copied to a certain extent, even increased.

Photocopying Process Video

2012-01-26T00:28:00.001+07:00

Learn how Photocopying Process using Xerography.
Photocopiers Work Video

How to Maintenance a Photocopier Machine

2012-01-24T03:19:00.000+07:00

If you want to maximize the use and extend the life of your photocopier machine and minimize the damage, you should learn tips on maintenance to improve the lifetime of your photocopier machine. It's very important that you have a photocopy machine for maximum performance

1. First of all, you should always remember to wipe the scanner glass using an anti-static cleaner liquid specifically designed for photocopiers. Small debris of dust greatly affects the scan quality. So make it a general rule to clean it regularly before using it.

2. Cleaning the Drum of your photocopier.

This is the part of the copier to which toner and paper attaches. It is attached to a toner cartridge and using high intensity light makes it conductive. Using a Mylar Bar, take a note to carefully clean this part of your photocopier, as this removes excess toner from your machine for better quality output.

3. Cleaning the Fuser of your photocopier.

To clean the fuser of your photocopier, a very light coat of silicon oil on a soft and smooth rug is needed. Wipe of the fuser until completely clean, and dry it using a different cloth.

4. Vacuuming the toner copier.

Most make the mistake of using an ordinary vacuum in cleaning the paper and toner areas than using the designated toner vacuum for photocopiers. If you use the ordinary vacuum, you may do more harm to yourself as the static charge from the toner can build up in the vacuum, giving you an electric shock.

Regularly cleaning the toner copier will ensure the flow of ink is consistent and continuous, for better printing quality.

5. Now that you know all the steps for cleaning the photocopier, always remember to keep a list of materials that you will be using before you start cleaning:
Anti-static cleaner
Mylar Bar
Silicon oil
Toner vacuum

Lastly, make sure to check and be familiarized with the content of your instruction manual for your photocopier. The parts and maintenance for your photocopier might also be written there depending on the brand of your office photocopier.

If you are unsure about the parts of your photocopier and should you wish to understand them in detail, including its maintenance on a more specific approach, do not hesitate to call your service provider for questions. If there are other technical problems beyond your reach, your service provider is more trained and experienced in handling technicalities that you might not know of.

Being well-informed of how to properly maintain and clean your photocopier is crucial from the very first time you purchase it. In this way, you can ensure maximum performance and increase the lifespan of your office photocopier.

Learn more about choosing the right photocopier machine. Stop by Summer Garside’s site where you can find out all about photocopiers and what photocopier brand is the suitable one for you.

Article Source: How to Maintain a Photocopier Machine

Merubah Scanner dan Printer Menjadi Mesin Fotokopi

2012-01-21T03:46:00.001+07:00

Photocopier Pro 4.02 | Merubah Scanner dan Printer Menjadi Mesin Fotokopi

Bagi anda yang ingin membuka Usaha Copy Center atau Copy Service atau lebih dikenal dengan Toko Fotokopi tapi terbentur dengan Harga Mesin Photocopy yang lumayan mahal? Maka saya merekomendasikan aplikasi Photocopier Pro 4.02 Full Serial ini.

Dengan aplikasi ini anda bisa Merubah Scanner dan Printer Menjadi Mesin Fotokopi layaknya sebuah Mesin Foto Copy. Aplikasi ini sangat rekomendasikan buat yang ingin buka usaha tapi modal kecil, terutama yang ingin mencoba bisnis photo copy.

Aplikasi ini saya coba di printer Canon MP258 multifungsi karena ada printer dan scanner, dan hasilnya berjalan dengan baik. Ketika saya klik copy di menu software Photocopier Pro 4.02, maka langsung saja scanner berjalan kemudian setelah selesai akan ada tmbol print. Lah, terus bedanya apa dengan tool bawaan scanner nya?? Pokoknya lebih praktis dengan tool bawaan scanner anda. Di coba, dan rasakan bedanya,, ehhehe.

Rincian program:

Membuat salinan hanya dengan menekan tombol Copy pada scanner Anda.
Mendapatkan preview dari gambar yang dipindai sebelum mulai mencetak. Memanipulasi (invert, mirror) gambar yang dipindai dari jendela pratinjau.
Memiliki kontrol yang lebih besar resolusi pindai.
Hapus bagian berlebihan dari gambar yang dipindai dengan Auto dan fungsi tanaman Manual.
Pilih perangkat pencitraan untuk digunakan. Nyaman ketika Anda memiliki kedua scanner dan kamera digital yang terpasang pada sistem anda.
Tentukan yang harus menggunakan fotokopi printer, tentukan printer terpisah untuk hitam dan putih, skala abu-abu dan salinan warna.
Instruksikan fotokopi untuk jeda sebelum mulai mencetak. Nyaman ketika Anda memiliki scanner dan printer terpasang pada sistem Anda melalui kotak saklar.
Menyimpan gambar hasil pindai dalam berbagai format grafis (JPEG, GIF, PNG, TIFF dll) dari jendela preview fotokopi itu.

Requirements:

A Windows NT/2000/XP/Vista/7 system.
A scanner that complies with the Twain standard (most scanners do).
A printer installed in Windows.

Source : http://www.remo-xp.com/2011/10/photocopier-pro-402-merubah-scanner.html
Password : www.remo-xp.com
Download Photocopier Pro 4.02 Full Serial

Download Canon NP6030 | NP6230 | NP6035 | 6028 free service manual

2012-01-16T00:43:00.001+07:00

Download free service manuals Canon NP6030, NP6230, NP6035, 6028
This Service Manuals is accompanied by the Service Handbook, which contains information on how to maintain and inspect the Canon NP6050 through adjustment and troubleshooting work.

Information found in this manual may be updated from time to time for product improvement, and major updates are communicated in the form of Service Information bulletins. All service persons are expected to be thoroughly familiar with the contents of this Service Manual, the Service Handbook, and Service Information bulletins and be ready to respond to the needs of the user promptly.

Table of contents Canon NP6030 Service Manual

Specifications
Names of Parts
Operation
Warnings and Corrections
Routine Work by the User
Image Formation
Auxiliary Process
Fundamentals of Operation
Exposure System
Image Formation System
Pick-up / Feeding System
Fans
Power Supply
Comoputer Form Feeder
Service Mode
Externals
Drive System
Pick-up/Feeding System
Exposure System
Self Diagnosis
Standards and Adjustments
Externals
Drive System
Charging System
Developing System
Fixing System
Electrical
Selecting the Site
Relocating the Copier
ets..

Download : CANON NP6030 SERVICE MANUALs
password : printer1.blogspot.com

Cara Setting atau Check IP Address Canon imageRunner

2012-01-14T04:15:00.000+07:00

our browser is not capable of rendering the iFrame feature. Click here to view the page.

Error Code iR3300 iR2800 iR2200

2012-01-10T18:20:00.000+07:00

E001 Overheating detection error

E002 Heater temperature error (fails to reach specific level; inadequate increase)

E003 Heater temperature error (abnormal drop; low-temperature detection)

E007 Fixing film rotation error

E010 Main motor rotation error

E014 Fixing motor rotation error

E019 Waste toner case full, sensor error

E032 DA unit communication error

E051 Horizontal registration HP detention error

E064 Power supply voltage error (high-voltage error)

E100 Laser BD error

E110 Polygon motor rotation error

E202 No. 1 mirror base HP detecting error

E204 ADF image leading edge signal detection fault (absent)

E220 Lamp ON error

E225 Standard white plate/edge white plate read error

E240 Mcon-Dcon communication error

E243 Mcon-control panel communication error

E248 Backup (EEPROM) error

E261 Zero-cross signal error

E302 Shading error

E315 Image data processing error

E601 Image transfer error

E602 Hard disk error

E604 Image memory fault

E605 Image memory battery fault

E606 HDD error

E674 Fax board error

E677 PDL board mounting error

E710 IPC initialization error (Rcon)

E711 IPC register error (ctrl)

E712 Communication error (with ADF)

E713 Communication error (with sorter finisher)

E716 Communication error (with pedestal)

E717 Communication error (with ASSIST)

E719 Card reader, coin vendor communication error

E732 Reader communication error

E733 Printer communication error

E737 SDRAM error

E740 Ethernet board error

E741 PCI bus error

E742 RIP1 board error

E743 Mcon-Rcon communication error (Rcon detection)

E803 MPWS power supply voltage error (low voltage error)

E805 Fan rotation error

E901 Pedestal main motor rotation error [ADF]

Kode Error Ir4570

2011-12-07T22:28:00.000+07:00

Error code CANON iR4570/ iR3570 / iR2870 / iR2270

E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003 post-standby fixing low temperature
E007 fixing film rotation error
E010 main motor rotation error
E014 fixing motor rotation error
E019 waste toner case full, waste toner case full sensor error
E020 toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025 hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191 communication error for high voltage power supply
E202 CIS home position detection error
E225 CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error
E490 wrong DF type
E500 finisher communication error
E503 finisher internal communication error
E505 finisher backup memory error
E514 stack delivery/trailing edge assist motor error
E519 gear change motor error
E520 off-set motor error
E530 rear alignment error
E531 stapling error
E532 stapler shift error
E535 swing error
E537 front alignment error
E540 stack tray ascent error/upper tray ascent error
E542 lower tray ascent error
E577 paddle error
E584 shutter error
E590 punching error
E591 puncher dust sensor error
E592 punch horizontal registration sensor error
E593 punch shift error
E5F0 saddle paper positioning error
E5F1 saddle paper folding error
E5F2 saddle guide error
E5F3 saddle alignment error
E5F4 saddle rear stapling error
E5F5 saddle front stapling error
E5F6 saddle butting error
E5F8 saddle connector error
E5F9 saddle switch error
E602 hard disk error
E604 image memory error/shortage
E609 hard disk error
E610 herd disk coding key fault
E674 fax board communication error
E710 IPC initialization error
E711 IPC communication error
E713 communication error for finisher
E716 communication error for pedestal/ communication error for 3-way unitA1
E717 communication error for NE controller
E719 coin vendor error
E730 PDL software error
E732 scanner communication error
E733 printer communication error
E740 Ether board error
E743 DDI communication error
E744 language file/boot ROM error
E745 TokenRing board error
E746 accessories board wrong model error
E748 controller board and SDRAM size mismatch
E805 fan error

Regarding most common errors related to fixing section:

E000 The temperature of the fixing assembly is abnormally high.
0001 While startup control is under way, the reading of
the main thermistor is less than 30 deg C
continuously for 200 msec or more 1 sec after the
start of power supply.
While startup control is under way, the reading of
the main thermistor is less than 70 deg C
continuously for 200 msec or more 2 sec after the
start of power supply.
While startup control is under way, the reading of
the main thermistor is less than 120 deg C
continuously for 200 msec 6 sec after the start of
power supply.
The startup control does not end 30 sec after the
start of power supply.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E001 The temperature of the fixing assembly is abnormally high.
0000 The reading of the main thermistor is 250 deg C
or more continuously for 200 msec.
0001 The hardware circuit detects overheating of the
main or sub thermistor for 200 msec.
0001 The hardware circuit detects overheating of the
main or sub thermistor for 200 msec.

Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E002 The rise in temperature of the fixing assembly is faulty.
0000 While startup control is under way, the reading of
the main thermistor is less than 115 deg C
continuously for 400 msec 1.3 sec after it has
indicated 100 deg C.
While startup control is under way, the reading of
the main thermistor is less than 150 deg C
continuously for 400 msec 1.3 sec after it has
indicated 140 deg C.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E003 The fixing temperature is too low after a standby state.
0000 While regular temperature control is under way,
the reading of the main thermistor is less than 140
deg C continuously for 400 msec or more.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E007 The rotation of the fixing film is faulty.
0000 While the fixing motor is rotating, the marker
signal is not detected for 6 sec with the reading of
the main thermistor indicating 100 deg C or more.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB
REPLACE FIXING FILM ASSY(HEATER)

Canon iR6000 Brosur Fotokopi

2011-04-21T14:08:00.000+07:00

Canon iR6000 photocopier brochure

[caption id="" align="alignnone" width="300" caption="Canon iR6000"][/caption]

Canon iR6000 Isi Brosur

iR6000 performance information

iR6000 optional extras

iR6000 specifications

Brosur Canon Ir6000 http://d1.scribdassets.com/ScribdViewer.swf

Download Driver Canon Ir6000

Driver Photocopier Canon iR6000

2011-04-21T13:32:00.000+07:00

Canon iR6000 photocopier summary

Canon IR6000 fotokopi: 60 ppm A4. Sistem Digital Solusi untuk Anda yang bergelut dengan Usaha Copy Center karena sudah terintegrasikan ke seluruh jaringan. Multi-tasking Copier, Printer, Scanner.

Fitur Photocopier Canon IR6000

60 ppm output
Tersedia 100 kotak surat (Mailboxes)
Cetak banyak dengan sekali Scan
Mixed Original Copying
Job Build
Reserve Jobs
Job Notification
5.1 GB Hard Disk
Remote User Interface

DRIVER iR6000

Brosur iR6000

Random Cool Stuff: What is a Photocopier? (geardiary.com)
When English Fails to Describe...a Photocopy Machine (lawafterthebar.wordpress.com)
Is it illegal to photocopy postage stamps (wiki.answers.com)
Braniac - What is a photocopier? (boston.com)
Panabiz unveils new Canon copiers to Nigeria market (vanguardngr.com)

Error E100 Canon iR | Cara Mengatasi Eror E100 iR1600

2011-03-28T01:05:00.000+07:00

Error E100 Canon iR1600 Disini saya kembali membagikan pengalaman saya tentang “Bagaimana Cara Mengatasi Eror E100 iR1600”. Pada awalnya mesin tidak masalah, hanya waktu itu saya ingin membersihkan tumpahan toner yang ada di Magnet roll Devloping dan juga roll transfer akhirnya saya buka semua unit Drum dan Unit Devloping dikeluarin seterusnya semprot pakai kompresor dan dipasang kembali dan coba langsung test print copy tiba2 dilayar langsung keluar error E100. Saya tahu permasalahan ada pada unit lasernya tetapi saya cek lasernya tidak ada masalah, makanya saya gogling di google dan menemukan artikel disitus rusia yang saya translate otomatis ke bahasa indo makanya kata-katanya pada nggak karuan.

E100 - Setelah sinar laser dihidupkan, sinyal BD tidak dapat dideteksi dalam jangka waktu tertentu dan itulah alasan terjadinya kesalahan.

Oke walaupun kata-katanya gak karuan tapi intinya Anda hanya perlu membersihkan kaca kaca pada bagian dalam unit laser itu, dan bagaimana caranya? Ikuti saja petunjuk dibawah ini karena sudah disertai gambar panduannya

Masalah: dengan kerugian minimal antara pusat layanan personel untuk sampai ke unit laser.

Tools: baik, itu rasanya ... Aku dengan Anda di seperti pertempuran akan mengambil: vacuum cleaner untuk mengumpulkan toner, pin obeng kecil, angka (silang) obeng.

Urutan pelaksanaan:

1) Hal pertama yang perlu Anda ekstrak dari kompor aparat.

Bagaimana melakukannya? Berikut adalah cara.
Lepaskan penutup kiri
Buka penutup depan
Ekstrak unit drum (drum-.nit)
Lepaskan baki feed manual dan meninggalkan menutupi di sebelah kiri
Lepaskan penutup yang tepat
Lepaskan tutupnya, yang keluar dari mesin kertas
Hapus dari rak kotak transparan. Dia duduk di perekat dan angka adalah sebagaimana diuraikan oleh garis tebal di sepanjang kontur.
Semua mencakup untuk menahan ke hard drive dan removable mudah; penting - akurasi.

Ini adalah kotak transparan, hanya gambar yang lebih besar. Angka 2 dan 3 ditandai lubang sekrup. Adalah penting untuk mengingat bagaimana ada kotak yang jelas, jika perakitan, Anda bisa mendapatkan diri dalam teka-teki :-) sedikit menyenangkan

Lepaskan sekrup (5), kemudian lepaskan tanah (6) dan lepaskan perakitan papan. Fee seakan rak di reses khusus.
Hati-hati dengan itu karena kabel (tampaknya di desainer khusus dikandung perusahaan Canon) tidak memiliki saham untuk panjang.

Lepaskan 3 x dari perakitan papan (9). Saya harus mengatakan bahwa konektor putih besar setelah Anda melepas konektor yang lebih nyaman untuk masuk ke dalam (relatif terhadap papan) bahwa dia tidak berbicara dan tidak mengganggu Anda dalam usaha masa depan.
Semua kabel yang dibutuhkan untuk menarik keluar dari pemotongan sisi pada kartu, jika tidak, anda tidak akan dapat menghapus kompor.

Lepaskan 2 sekrup kecil (10) dan 2 sekrup besar panjang (11). Terakhir mudah untuk membuka tutup, jika Anda menyisipkan sebuah tuas kecil di lubang (13) di sekrup A (lihat Gambar Kanan.).

Setelah semua prosedur di atas, menghapus gerakan, kompor halus pada dirinya sendiri. Jika Anda melakukan semuanya dengan benar, Anda akan berhasil. Dewan perakitan dapat mengganggu proses sedikit, tapi saya pikir dengan cara perusahaan menempatkan, Anda akan mengerti tanpa aku.

2) Sekarang laser blok.
Anda dapat menghapus seluruh blok laser seluruhnya. Saya belum pernah menggunakan cara ini, karena sebelum tirai dapat dicapai hanya dengan menghapus penutup atas laser. Tetapi jika Anda ingin, misalnya, pencegahan unit laser, kemudian, tentu saja, harus menghapus itu sepenuhnya.
Sangat sederhana. Kami mengambil kain lap (1) - adalah bagian dari bahan berpori, segera akan melihat, lepaskan 3 x (2). Memulas 4 sekrup (3) dan lepaskan penutup unit laser (4). Yang terakhir adalah terpasang ke beberapa kait, tidak rusak sebagian dari mereka ...
Sekarang jika Anda melihat unit laser, lalu ke kanan sebelum itu (sambil bergerak sinar) Anda akan melihat tirai sedikit. Anda dapat melakukan percobaan untuk konfirmasi: meninggalkan segala sesuatu di formulir ini, keluarkan tabung dari cartridge dan masukkan sepenuhnya oleh semua aturan kembali. Kami mengambil rana sepenuhnya dan melupakannya ...

Puting mesin - semuanya sudah siap. Terima kasih atas perhatian Anda.

Dalam artikel itu alasan untuk kode kesalahan E100 benar - tidak memblokir naik laser tirai.
Tapi sangat sering menjadi masalah adalah dengan punggungan kerusakan pada kartrid drum (drum-unit). Pengalaman menunjukkan bahwa kegagalan terjadi ketika penghapusan ceroboh kertas, atau ketika dimasukkan dengan benar ke cartridge.

Untuk memperbaiki perbaikan bibir sisa: kita terpaku dan diperkuat klip (kekuatan ini akan tampil dengan baik). Atau hanya mengubah cartridge dengan yang baru, jika tidak ditemukan chip.
Sebuah metode yang dijelaskan dalam artikel masalah tonjolan tersebut dapat dihilangkan sekali dan untuk semua. Meskipun membayar untuk kartrid baru 100-120 dolar lebih begitu kejam tidak datang.

Incorrect Paper Size and Stop Printing Canon Ir1600 | Ir2000

2011-03-25T18:22:00.000+07:00

How to fix Incorrect Paper Size and Stop Printing Canon Ir1600 and Ir2000

Disini saya mau Share pengalaman waktu pertama beli Mesin Photocopy IR1600 yang selalu keluar tampilan Incorrect Paper Size.

Waktu pertama kali mesin di kirim tidak ada masalah dengan Fotokopi Ir1600 itu tapi selang beberapa bulan kemudian saya ditelponin dari kantor itu, maklum saya beli buat di Rental-in soalnya jaman sekarang mengandalkan teknisi panggilan di Jakarta semakin sulit walaupun Menyewakan Mesin Photocopy juga bukan gampang, gini orangnya bilang kalau pakai kertas Folio fotokopi 2 lembar yang keluar cuman satu terus dilayar tampilan keluar Incorrect Paper Size.

Setelah saya datangin saya periksa oh... ternyata ada yang salah dengan programnya mungkin operatornya pencet-pencet sehingga prog' berubah. Nah untuk itu disini saya mau bagi-bagi pengalaman mudah-mudahan ada yang permasalahan sama tetapi tidak bisa mengatasinya. Oke...

Cara Mengatasi Incorrect Paper Size Canon Ir1600 dan Ir2000.

1. Tekan Additional Functions (*)

2. Tekan ID (#) keluar SERVICE MODE

3. Tekan panah kekanan (>) cari #7 PRINTER tekan OK

4. Tekan panah kekanan (>) cari #6 CST tekan OK

5. Tekan panah kekanan (>) cari CST U2 jika posisi angka Nol (0) ganti menjadi 24 tekan OK

6. Tekan Reset matikan power dan hidupkan kembali

7. Selesai

Sekarang geser slider size ke U2 untuk pakai kertas Folio

Lihat Gbr

Selamat mencoba.

Bagi anda yang membutuhkan SERVICE MANUAL CANON IR apa aje dengan harga Rp. 100 rb dan Canon Analog NP6050, NP6030/35 dll Rp.75rb, (bentuk cd) belum termasuk Ongkos kirim, silahkan email ke : solutionrental@gmail.com

Kode Error Canon NP6030|6035 - E001,002,003,004

2011-03-24T21:05:00.000+07:00

Banyak yang bertanya pada saya cara mengatasi "Kode Error Canon NP6030 dan Canon NP6035" tentang "Cara mengatasi Error E001, Error E002, Error E003 dan juga Error E004". Bagian utama dan yang pertama kita lakukan adalah coba bongkar Fusing unit atau bagian unit pemanas, keluarkan dari dalam mesin agar lebih leluasa kita memeriksanya dan perhatikan fisiknya baik itu Thermistor, Fuse, heater lamp/lampu pemanasnya apakah ada yang cacat atau tidak.

Selanjutnya ambil multitester, multimeter/avometer atau apalah sebutan orang untuk alat mengukur itu. Sebelum pengecekan kalibrasi dulu meternya dengan caranya posisikan tombol pada Ohm meter dan tempelkan ujung probe hitam dan merah apabilah jarum bergerak tandanya bagus.

Sekarang cabutkabel soket Thermistor dan pada kedua kabel thermistor tempelkan ujung probe hitam dan merah multimeter sedangkan ujung/kepala thermistor (warna kuning) tempelkan badan besi solder yang sudah dipanaskan dan perhatikan jarum meter apakah bergerak naik perlahan kalau jarum meternya naik pertanda thermistor itu bagus

NB: Ada kalanya thermistor itu bukan rusak tapi solderan pada kedua atau salah satu kabel yang menempel dikepala thermistor itu lepas dari solderannya akibat panas

Selanjutnya periksa bagian Fuse/sekring pemanas caranya gampang tempelkan ujung probe hitam pada kaki fuse dan tempelkan ujung probe merah multimeter pada kaki fuse yang lainnya dan lihat jarum meternya pakah bergerak atau tidak , apabilah tidak bergerak pertanda fuse atau sekringnya putus dan segerahlah ganti.

NB: Untuk mengatasi sementara Fuse atau sekring yang putus kita bisa mengganti dengan kabel serabut (5 helai isi kabel serabut halus yang dipelintir) dan lilitkan pada kedua kaki fuse/sekring

Selanjutnya kita akan memriksa Heater lamp atau lampu pemanas. Untuk Heater lamp Canon Np 6030/Canon NP6035 dengan Voltase 220 Volts hanya memakai satu heater Lamp () sedangkan mesin Voltase 115 Volts memakai 2 heater lamp. Cara pengukurannya sama dengan mengukur Fuse diatas apabilah bergerak tandanya bagus.

NB: kadang roll heater/roll pemanas atas (teflon) berpengaruh juga pada error E002 terutama pada Canon NP6030/35 itu pengalaman saya selama 10 tahun jadi Teknisi Fotocopi Canon

Selain yang saya sebutkan diatas jangan lupa juga periksa kabel-kabelnya, karena tikus jaman sekarang sudah gak doyan ikan asin ama teri, doyannya kabel2 elektronik kwak...kwak.... Apabilah kesemuanya itu di coba dan tes bagus semua sudah saatnya Anda pindah posisi ke bagian belakang mesin fotocopi dan buka covernya sekarang coba periksa kabel yang terhubung ke SSR - Error Code E004 (ada baiknya anda coba ganti memakai SSR dari mesin yang masih normal).

Setelah kesemuanya anda periksa dan ternyata tidak ada masalah pada bagian-bagian itu, langkah terakhirnya adalah dengan mengganti Mainboard atau DC Control-nya. Sebenarnya DC Controlnya masih bisa diperbaiki akan tetapi mungkin nanti saya jelasin pada artikel berikutnya.

Semoga dengan anda membaca artikel ini Anda sudah bisa mengatasi permasalahan Error Mesin Photocopy NP6030 dan NP6035 Khususnya Error E001, Error E002, E003, E004

2011-03-22T10:11:00.000+07:00

Error Code 1600_2000

Error Code in Canon iR5000/iR6000

2011-03-07T10:46:00.004+07:00

These are all list of Error Code in Canon iR5000/iR6000 more to come, i hope your machines works fine and never get error.

*E000

Main cause: the main thermistor (TH1) has poor contact or an open circuit.The thermal switch (TP1) has an open circuit.The fixing heater has an open circuit.The SSR is faulty.The DC controller PCB faulty.Mode of detection: 0000 after the main power switch is turned on,the temperature detected by the main thermistor does not reach 70ºC.
Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

*E001

Main cause: The main thermistor (TH1) has a short circuit.The sub thermistor (TH2) has detected overheating.The SSR is faulty.The DC controller PCB is faulty.Mode of detection:0001 The main thermistor or the sub thermistor has detected about 230ºC or higher for 2 sec.0002 The main thermistor has detected 230ºC or higher (hard circuit detection)0003 The sub thermistor has detected about 236ºC or higher. Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

*E002

Main cause: The main thermistor (TH1) has poor contact or an open circuit.The thermal switch (TP1) has an open circuit.The SSR is faulty.The DC controller PCB is faulty.Mode of detection:0000 The temperature of the upper fixing roller does not reach 100ºC within 2 min after it has exceeded 70ºC. Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

*E003

Main cause: The main thermistor (TH1) has poor contact or an open circuit.The thermal switch (TP1) has an open circuit.The fixing heater has an open circuit.The SSR is faulty.The DC controller PCB is faulty.Mode of detection:0000 The temperature detected by the main thermistor is 70ºC for 2 sec or more after it has reaced 100ºC. Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

*E004

Main cause: The SSR has a short circuit. The DC controller PCB is faulty.Mode of detection:0000 The SSR used to drive the fixing heater is found to have a short circuit (hard circuit detection). Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

*E005

Main cause: The fixing web has been taken up. The fixing web length sensor (PS45) is faulty.The DC controller PCB is faulty.Mode of detection:0000 The length of fixing web that has been taken up is in excess of the specified length. Caution: After replacing the fixing web, be sure to reset the two web counters in service mode:COPIER>COUNTER>MISC>FIX-WEB and COPIER>COUNTER>DRBL-1>FX-WEB.

*E010

Main cause: The main motor (M2) is faulty. The DC controller PCB is faulty.Mode of detection:0000 The clock pulse do not arrive for 2 secs or more after the main motor drive signal (MMFG) has been generated.

*E012

Main cause: The drum motor (M1) is faulty. The DC controller PCB is faulty.Mode of detection:0000 The clock pulses do not arrive for 2 secs or more after the drum motor drive signal (DMFG) has been generated.

*E013

Main cause: The waste toner feedscrew is faulty. The waste toner clock sensor (MSW2) is faulty. The DC controller PCB is faulty.Mode of detection:0000 The rotation of the waste toner feedscrew goes out of order, and the switch (MSW2) is pressed multiple times during a specific period of time.

*E014

Main cause: The fixing motor (M19) is faulty. The DC controller PCB is faulty.Mode of detection:0000 The motor clock signal is detected for 2 secs or more continuosly after the fixing motor drive has been generated.

*E020

Main cause: The hopper connector is left disconnected. The hopper motor (M9/M10) is faulty.The toner sensor (TS1/TS2) is faulty. The DC controller PCB is faulty.Mode of detection:0000 During printing, the toner supply is '0' (absence of toner) for 2 mins.

* E032

Main cause: The copy data controller or the remote diagnostic device is faulty. The main controller PCB is faulty.Mode of detection:0001 Although once connected,the copy data controlleror the remote diagnostic device has become disconnected.

* E061

Main cause: The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty.Mode of detection:0001 As the result of potential control,the drum surface potential (VL2) of the white background is about 200V
(generating solid black images).0002 The primary charging output used for print output and the drum surface potential after laser output has been made are about 200V (generating solid black images).

* E100

Main Cause: The BD PCB is faulty. The laser unit is faulty. The laser driver PCB isfaulty. The wiring is faulty (short circuit, open circuit). The DC controllerPCB is faulty.Mode of Detection:0001 In 100 msec after the laser drive signal has been generated, the BD signal is not detected 50 times or more
within 40 msecs.0002 While the laser is on, the BD signal cycle is found to be outside aspecific range 10 times or more.

* E110

Main Cause: The laser scanner motor (M15) is faulty. The wiring is faulty (short circuit,open circuit). The DC controller PCB is faulty.Mode of Detection:0001 • After the laser scanner motor drive signal has been generated,the motor ready signal (LMRDY*) does not arrive for
15 secs or more. (stop - full speed, half-speed - full speed)• During the period of 'full speed - half speed', the motor ready signal does not arrive for 60 secs or more after
the speed change signal has been generated.• During the period of 'full speed rotation', the motor ready signal is not detected 50 times or more (t intervals of 100 msec).

* E121

Main Cause: The controller cooling fan (FM4) is faulty. The wiring is faulty (short circuit,open circuit). The DC controller PCB is faulty.Mode of Detection0001 Although the controller cooling fan (FM4) is being driven, the clock signal (FM4LCK) does not arrive for 5 secs or more.
E196Main Cause: The EEPROM on the DC controller PCB is faulty. The location of the EEPROM is wrong. The DC controller PCB is faulty.Mode of Detection:1abb When data is written to the EEPROM, the data written and the data read do not match.2abb When the ID read into the EEPROM and the ID into the ROM are compared, a mismatch is found.3abb When ID in the EEPROM and the ID in the ROM are compared after the main power switch is turned on, a mismatch is found.a: chip Nos. 0 through 5 (0: IC104, 1: IC105, 2: IC109, 3: IC110, 4: IC127, 5: IC130)bb: chip faulty address (bit)

* E202

Main Cause: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty.Mode of Detection:0001 The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been turned on or the Start key has been pressed.0002 The scanner HP sensor does not turn on even when the scanner has been moved 450 mm in reverse.Caution No code is indicated, and keys are locked. The code may be checked in service mode (COPIER>DISPLAY>ERR).

* E204

Main Cause: The ADF controller PCB is faulty. The reader controller PCB is faulty.Mode of Detection:0001 During printing, the image leading edge signal does not arrive from the ADF.Caution No code is indicated, and keys are locked. The code may be checked in service mode (COPIER>DISPLAY>ERR).

* E220

Main Cause: The lamp inverter PCB is faulty. The reader controller PCB is faulty.Mode of Detection:0001 The lamp inverter PCB is found to have a fault.

* E225

Main Cause: The scanning lamp (xenon tube) is faulty. The inverter PCB is faulty. The CCD/AP PCB is faulty. The reader controller PCB is faulty.Mode of Detection:0000 A specific signal level cannot be attained by CCD gain correction at power-on.0002 The edge gain correction value changed more than a specific level compared with the correction value used for the preceding sheet.

* E240

Main Cause: The main controller PCB. The DC controller PCB is faulty.Mode of Detection:0000 An error has occurred in the communication between the main controller PCB and the CPU of the DC controller PCB.

* E243

Main Cause: The control panel CPU PCB is faulty. The main controller PCB is faulty.Mode of Detection:0000 An error has occurred in communication between the CPU of the control panel CPU PCB and the main controller PCB.

* E248

Main Cause: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty.Mode of Detection:0001 The ID read into the EEPROM when the main power switch has been turned on and the ID in the ROM do not match.0002 When data is written into EEPROM, the data written and the data read do not match.0003 When data is written, the ID in the EEPROM and the ID in the ROM are found not to match.

* E302

Main Cause: The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty.Mode of Detection:0001 During shading, the reader controller PCB does not end shading in 1 sec.0002 In stream reading, the edge white accumulation (processing) does not end after a period of 10 secs.

* E601

Main Cause: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The DC controller PCB is faulty. The main controller PCB is faulty.Mode of Detection:0000 The main controller PCB has detected an error in control datawhile an image was transmitted between the main controller PCBand the hard disk drive.0001 The main controller PCB has found an error in the control data intransfer of images between main controller PCB and the DC controllerPCB.

* E602

Main Cause The wiring is faulty (short circuit, open circuit). The hard disk drive isfaulty. The main controller PCB is faulty.Mode ofDetection0001 A mount error was detected when the hard disk was started upfrom the boot ROM.0002 A data read error (from the hard disk) was detected when the harddisk was started from the boot ROM.

* E607

Main Cause The hard disk fan (FM7) is faulty. The wiring is faulty (short circuit, opencircuit). The DC controller PCB is faulty.Mode ofDetection0000 While the hard disk fan (FM7) is being driven, the clock signal(FM7CLK) does not arrive for 5 secs or more.

* E677

Main Cause The various printer board (accessories) are faulty. The main controller PCB is faulty.Mode ofDetection0001 An error has occurred in the communication between the various

* E710

Main Cause The DC controller PCB is faulty. The reader controller PCB is faulty.The main controller PCB is faulty.Mode ofDetection0001 When the main power is turned on, the IPC (IC5021) on the readercontroller PCB cannot be initialized.0002 When the main power is turned on, the IPC (IC120) on the DCcontroller PCB cannot be initialized.0003 When the main power is turned on, the IPC (IC1003) on the maincontroller PCB cannot be initialized.

* E711

Main Cause The connector is not connected properly. The remote diagnostic device PCBis faulty. The copy data controller PCB is faulty. The ADF controller PCB isfaulty. The ADF controller PCB is faulty. The finisher controller PCB isfaulty.Mode of Detection 0001 Data has been written to the error register of the IPC (IC5021) onthe reader controller PCB four times or more within 1.5 secs.0002 Data has been written to the error register of the IPC (IC120) onthe DC controller PCB four times or more within 2 secs.0003 Data has been written to the error register of the IPC (IC1003) ofthe main controller PCB four times or more within 2 secs.

* E712

Main Cause The connector is not connected properly. The ADF 24-V power supply isfaulty. The ADF controller PCB is faulty. The reader controller PCB isfaulty.Mode ofDetection0001 Communication does not resume in 3 secs after data has been writtento the error register of the communication IC (IPC) of the ADFcontroller PCB.0002 The transmission bit is not enabled after a period of 10 sec at thesync register of the IPC (IC5021) on the reader controller PCB.

* E713

Main Cause The connector is not connected properly. The finisher accessories powersupply PCB is faulty. The finisher controller PCB is faulty. The DC controllerPCB is faulty.Mode ofDetection0000 The communications IC (IPC) on the finisher controller has goneout of order.

* E717

Main Cause The wiring is faulty (short circuit, open circuit). The copy data controller orthe remote diagnostic device is faulty. The main controller PCB is faulty.Mode ofDetection0001 The copy data controller or the NE controller is out of order or anopen circuit has been detected.Caution The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).

* E719

Main Cause The wiring is faulty (short circuit, open circuit). The coin vendor is faulty.The main controller PCB is faulty.Mode of Detection0001 The communication between the coin vendor and the main controllerPCB has been interrupted.Caution The error must be reset in service mode (COPIER>FUNCTION>CLEAR>ERR).

* E732

Main cause The connector has poor contact. The reader controller PCB is faulty.Mode ofDetection0001 The main controller PCB has detected an error in the communicationbetween the reader controller PCB and the main controllerPCB.

* E733

Main cause The connector has poor contact. The DC controller PCB is faulty.Mode ofDetection0001 The main controller PCB has detected an error in the communicationbetween the DC controller PCB and the main controller PCB.CLEAR>ERR).printer boards (accessories) and the main controller PCB.

* E740

Main cause The LAN card is faulty. The main controller PCB is faulty.Mode ofDetection0001 An error is detected on the LAN card at power-on (with the cardinserted).0002 A MAC address is found to be faulty.0003 The LAN card register cannot be read.

* E741

Main Cause The PCI bus connection is not proper. The main controller PCB is faulty.Mode ofDetection0000 An error has occurred in the PCI bus.

* E742

Main Cause The RIP1 board (accessory) is faulty. The main controller PCB is faulty.Mode ofDetection0000 An error has been detected by self diagnosis of the RIPI board.

* E743

Main cause The connector has poor contact. The main controller PCB is faulty.Mode of Detection 0000 The reader controller PCB has detected an error in the communicationbetween the main controller PCB and the reader controllerPCB.

* E804

Main Cause The wiring is faulty (short circuit, open circuit). The DC power supply fan(FM6) is faulty. The DC controller PCB is faulty.Mode ofDetection0000 While the DC power supply fan is being driven, the clock signal(FM6CLK) does not arrive for 5 secs or more.

* E805

Main Cause The wiring is faulty (short circuit, open circuit). The feed fan (FM1) isfaulty. The heat discharge fan (FM3) is faulty. The DC controller PCB isfaulty.Mode ofDetection0001 While the heat discharge fan is being driven, the clock signal(FM3CLK) does not arrive for 5 secs or more.0002 While the feed fan is being driven, the clock signal (FM1CLK)does not arrive for 5 secs or more.

* E824

Main Cause The wiring is faulty (short circuit, open circuit). The primary charging assemblycooling fan (FM2) is faulty. The DC controller PCB is faulty.Mode ofDetection0000 While the primary charging assembly cooling fan is being driven,

* E412

Main Cause The cooling fan (FM1) is faulty. The ADF controller PCB is faulty.Mode ofDetection0001 While the cooling fan is being driven, the lock signal (FMLCK)arrives for 100 msec or more.

* E420

Main Cause The EEPROM is faulty. The ADF controller PCB is faulty.Mode of Detection 0001 When the host machine's power switch is turned on, the backupdata of the EEPROM cannot be read or the data, if read, has an error.

* E421

Main Cause The EEPROM is faulty. The ADF controller PCB is faulty.Mode ofDetection0001 Backup data cannot be written to the EEPROM or the data, if written,has an error.the clock signal (FM2CLK) does not arrive for 5 secs or more.

* E422

Main Cause The IPC communication has an error. The communication line has an opencircuit. The ADF controller PCB is faulty.Mode ofDetection0001 While the machine is in standby, the communication with the hostmachine has been interrupted for 5 secs or more. or, while the machineis in operation, the communication with the host machine hasbeen interrupted for 0.5 sec or more.

* E500

Main Cause The finisher controller PCB is faulty. The DC controller PCB is faulty.Mode ofDetection0001 The communication between the host machine and the finisher hasbeen interrupted; this error is detected by the host machine.

* E503

Main Cause The saddle stitcher controller PCB is faulty. The finisher controller PCB isfaulty.Mode ofDetection0002 The communication between the saddle stitcher controller PCBand the finisher controller PCB has been interrupted.

* E504

Main Cause The height sensor (PS1) is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 Communication between the height sensor and the finisher controllerPCB is not possible, or communication data has an error.0002 Communication between the height sensor and the finisher controllerPCB is not possible for a specific period of time.0003 At time of power-on, the connector of the height sensor is found tobe disconnected.0004 When the height sensor is being adjusted using the DIP switch, anerror occurred during the adjustment.

* E505

Main Cause The EEPROM is faulty. The finisher controller PCB is faulty. The puncherdriver PCB is faulty.Mode ofDetection0001 When the power switch is turned on, the check sum of theEEPROM on the finisher controller PCB is found to have an error.0002 When the power switch is turned on, the check sum of theEEPROM on the puncher driver PCB is found to have an error.

* E512

Main Cause The delivery motor clock sensor (PI10) is faulty. The delivery motor (M2)is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 When operation starts, as many clocks as needed do not arrivefrom the delivery motor clock sensor.0002 No clock pulse arrives while paper is being moved over a distanceof 200 mm.

* E530

Main Cause The alignment plate home position sensor (PI6) is faulty. The alignmentmotor (M3) is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 The alignment plate does not leave home position when the alignmentmotor has been driven for 2 secs.0002 The alignment plate does not return to home position when thealignment motor has been driven for 2 secs.

* E531

Main Cause The stapler home position detecting switch (MS7) is faulty. The stapler motor(M6) is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 The stapler does not leave home position when the stapler motorhas been driven for 0.5 sec.0002 The stapler does not return to home position when the stapler motorhas been driven for 0.5 sec.

* E532

Main Cause The stapler shift home position sensor (PI7) is faulty. The stapler shift motor(M4) is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 The stapler unit does not leave home position when the stapler shiftmotor has been driven for 4 secs.0002 The stapler unit does not return to home position when the staplershift motor has been driven for 4 secs.

* E535

Main Cause The swing motor clock sensor (PI20) is faulty. The swing guide open sensor(PI18) is faulty. The safety area switch (MS3) is faulty. The swing guideclosed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty.The finisher controller PCB is faulty.Mode ofDetection0001 The swing guide closed detecting switch 2 does not turn on whenthe swing motor has been rotated CCW for 1 sec.0002 The swing guide open sensor does not turn on when the swing motorhas been rotated CW for 1 sec.0003 When the tray lift motor is in operation, the swing guide closed detectingswitch 2 is found to be off while the tray 1/2 is at OFF positionof the safety area switch.0004 No clock arrives for 200 msecs while the machine is in swing operation.

* E540

Main Cause The tray home position sensor (PI8) is faulty. The tray lifter motor clocksensor 1/2 (PI9/PI19) is faulty. The tray upper limit detecting switch (MS5)is faulty. The tray lifter motor (M5) is faulty. The finisher controller PCB isfaulty.0001 The ascent does not end in 15 secs when the tray lift motor isdriven; or, the tray home position cannot be detected when the traylift motor has been driven for 15 secs.0002 While the tray is moving up, the tray upper limit detection switchis found to be on.0003 When the tray lift motor is driven, clock pulses do not arrive fromthe clock sensor 1/2 for 200 msecs.

* E584

Main Cause The shutter open sensor (PI5) is faulty. The safety area detecting switch(MS3) is faulty. The shutter closed detecting switch (MS4) is faulty. TheNo. 2 feed motor (M8) is faulty. The finisher controller PCB is faulty.Mode ofDetection0001 The shutter closed detecting switch does not turn on when the No.2 feed motor has been rotated CCW for 1 sec or more.0002 The shutter open sensor does not turn on when the No. 2 feed motorhas been rotated CCW for 1 sec.0003 While the tray lift motor is in operation, the shutter closed detectingswitch is found to be off when the tray 1/2 is at OFF positionof the safety area detecting switch.

* E590

Main Cause The punch home position sensor (PI3P) is faulty. The punch motor (M1P)is faulty. The punch driver PCB is faulty.Mode ofDetection0001 The puncher does not leave home position when the punch motorhas been driven for 200 msecs.0002 The puncher does not return to home position when the punch motorhas been driven for 200 msecs.

* E593

Main Cause The horizontal registration home position sensor (PI1P) is faulty. The horizontalregistration motor (M1P) is faulty. The punch driver PCB is faulty.Mode ofDetection0001 The puncher does not leave home position when the horizontal registrationmotor has been driven for 4 secs.0002 The puncher does not return to home position when the horizontalregistration motor has been driven for 4 secs.

* E5F0

Main Cause The paper positioning plate home position sensor (PI7S) is faulty. The paperpositioning plate motor (M4S) is faulty. The saddle stitcher controllerPCB is faulty.Mode ofDetection0001 The paper positioning plate home position sensor does not turn onwhen the paper positioning plate motor has been driven for about1.3 secs.0002 The paper positioning plate home position sensor does not turn off1 sec after the paper positioning plate motor has been driven for 1sec.

* E5F1

Main Cause The folding motor clock sensor (PI4S) is faulty. The paper folding homeposition sensor (PI21S) is faulty. The folding motor (M2S) is faulty. Thesaddle stitcher controller PCB is faulty.Mode ofDetection0001 The number of detection pulses of the folding motor clock sensordrops below a specific value.0002 The state of the paper folding home position sensor does notchange when the folding motor has been driven for 3 secs.

* E5F2

Main Cause The guide home position sensor (PI13S) is faulty. The guide motor (M3S)is faulty. The saddle stitcher controller PCB is faulty.Mode ofDetection0001 The guide home position sensor does not turn on when the guidemotor has been driven for about 0.5 sec.0002 The guide home position sensor does not turn off when the guidemotor has been driven for 1 sec.

* E5F3

Main Cause The alignment home position sensor (PI5S) is faulty. The alignment motor(M5S) is faulty. The saddle stitcher controller PCB is faulty.Mode ofDetection0001 The alignment plate home position sensor does not turn on whenthe alignment motor has been driven for 0.5 sec (initially, drivenfor about 1.7 sec).0002 The alignment plate home position sensor does not turn off whenthe alignment motor has been driven for 1 sec.

* E5F4

Main Cause The stitch home position sensor (rear, MS5S) is faulty. The stitch motor(rear, M6S) is faulty. The saddle stitcher controller PCB is faulty.Mode of Detection 0001 The stitcher home position sensor (rear) does not turn off when thestitch motor (rear) has been rotated CW for 0.5 sec or more.0002 The stitch home position sensor (rear) does not turn on when thestitch motor (rear) has been rotated CCW for 0.5 sec or more.

* E5F5

Main Cause The stitch home position senor (front, MS7S) is faulty. The stitch motor(front, M7S) is faulty. The saddle stitcher controller PCB is faulty.Mode ofDetection0001 The stitch home position sensor (front) does not turn off when thestitch motor (front) has been rotated CW for 0.5 sec or more.0002 The stitch home position sensor (front) does not turn on when thestitch motor (front) has been rotated CCW for 0.5 sec or more.

* E5F6

Main Cause The paper push-on plate motor clock sensor (PI1S) is faulty. The paperpush-on plate leading edge position sensor (PI15S) is faulty. The paperpush-on plate home position sensor (PI14S) is faulty. The paper push-onplate motor (M8S) is faulty. The saddle stitcher controller PCB is faulty.Mode ofDetection0001 The paper push-on plate home position sensor does not turn onwhen the paper push-on plate motor has been driven for 0.3 sec ormore.0002 The paper push-on plate home position sensor does not turn offwhen the paper push-on plate motor has been driven for 0.3 sec ormore.0003 The paper push-on plate leading edge position sensor does not turnoff when the paper push-on plate motor has been driven for 0.3 secor more.0004 The number of detection pulses of the paper push-on plate motorclock sensor drops below a specific value.0005 The paper push-on plate leading edge sensor does not turn onwhen the paper push-on plate motor has been driven for 0.3 sec or more.

* E5F8

Main Cause The guide home position sensor (PI13S) is faulty. The paper push-on platehome position sensor (PI14S) is faulty. The paper push-on plate leadingedge position sensor (PI15S) is faulty. The saddle stitcher controller PCB isfaulty.Mode ofDetection0001 The connector of the guide home position sensor is found to bedisconnected.0002 The connector of the paper home positioning plate home positionsensor is found to be disconnected.0003 The connector of the paper push-on plate leading edge positionsensor is found to be discontented.

* E5F9

Main Cause The inlet door switch (MS1S) is faulty. The front door switch (MS2S) isfaulty. The delivery door switch (MS3S) is faulty. The saddle stitch controllerPCB is faulty.Mode of Detection 0001 When the inlet cover, front cover, and the delivery cover are foundto be closed, the inlet door switch detects an open condition for 1sec or more from the start of the initial rotation of the host machineor the start of printing.0002 When the inlet cover, front cover, and delivery cover are found tobe closed, the front door switch detects an open condition for 1 secor more after the start of the initial rotation of the host machine orthe start of printing.0003 When the inlet cover, front cover, and delivery cover are found tobe closed, the delivery door switch detects an open condition for 1sec or more from the start of the initial rotation of the host machineor the start of printing.

URL Shorten: http://brta.in/TX1vCiWK