Power Plant Forum http://www.powerplantforum.com/ Power Plant Forum - Discuss about power, generator, circuits, power plant, steam, turbine combustion, aero derivative en Sun, 27 May 2012 22:46:30 GMT vBulletin 60 http://www.powerplantforum.com/vbully/misc/rss.jpg Power Plant Forum http://www.powerplantforum.com/ Plant recordkeeping http://feedproxy.google.com/~r/PowerPlantForum/~3/Azs6Yh9cgCk/2483-plant-recordkeeping.html Wed, 21 Dec 2011 14:49:57 GMT Our electric plant was commissioned in 1939. Daily log sheets were, and continue to be recorded by hand. Up until 2007, this recordkeeping was done... Our electric plant was commissioned in 1939. Daily log sheets were, and continue to be recorded by hand. Up until 2007, this recordkeeping was done on a 16 1/2" X 26" sheet. Since then, the operators enter info onto a legal sized paper which is then input into a Microsoft access program I created.

My question concerns the large logsheets. In the past, each year's logsheets were bound using a masonite top and bottom, and bound together using bolts & nuts. These yearly books have been kept in a varity of cabinets, both homemade and modified paint cabinets. See attached image (sorry, I forgot to rotate image before uploading it.)

We have a total of 69 books, all about 5" thick. The records from 2007 are stored in a file box, with two years worth of sheets in each box.

I want to see if anyone has purchased or made cabinets for these old types of books. I am assumming that other plants used the same types of daily logsheets, in the good old days.

I am also attaching an image of our plant from around 1940. If you look closely, you can see the operator bending over a table, lower left side, where he is entering the engine information onto a daily logsheet.

Anyone have any ideas for me?

Thanks in advance.
Attached Images
File Type: jpg logsheetbooks.jpg (61.5 KB)
File Type: jpg 1939_005.jpg (97.5 KB)


]]> Power Plant Forum rmiell http://www.powerplantforum.com/power-plant-forum/2483-plant-recordkeeping.html http://www.powerplantforum.com/power-plant-forum/2483-plant-recordkeeping.html How to grow plants indoor with LED grow light? http://feedproxy.google.com/~r/PowerPlantForum/~3/n006Wd8EdnA/1612-how-grow-plants-indoor-led-grow-light.html Mon, 12 Dec 2011 14:01:56 GMT :)Good day, everyone, Will you pls tell me how to grow plants indoor with LED grow light? Thanks in advance.:confused: :)Good day, everyone,
Will you pls tell me how to grow plants indoor with LED grow light?
Thanks in advance.:confused:


]]> Power Plant Forum Amy0824 http://www.powerplantforum.com/power-plant-forum/1612-how-grow-plants-indoor-led-grow-light.html http://www.powerplantforum.com/power-plant-forum/1612-how-grow-plants-indoor-led-grow-light.html OC + EF Relays http://feedproxy.google.com/~r/PowerPlantForum/~3/5hj67EQmir8/1594-oc-ef-relays.html Mon, 12 Dec 2011 08:33:35 GMT We are planning to Source the standard OC + EF numercal relay for standard feeder protection , howver woudl ike to be adivsed as what shoudl be nos... We are planning to Source the standard OC + EF numercal relay for standard feeder protection , howver woudl ike to be adivsed as what shoudl be nos of stages that this OC element should have and some information of LOW -SET and HIGH set setting and thumb rules basis your experiences.

Thanks in advance...


]]> Relay Protection jolboy2005 http://www.powerplantforum.com/relay-protection/1594-oc-ef-relays.html http://www.powerplantforum.com/relay-protection/1594-oc-ef-relays.html Minimum Fluidization velocity http://feedproxy.google.com/~r/PowerPlantForum/~3/NJdQ5pYJD_U/1396-minimum-fluidization-velocity.html Fri, 09 Dec 2011 23:42:10 GMT Hi, I am doing experiment in a laboratory scale fluidized bed. Here is my concern, in literature it says that minimum fluidization velocity increases... Hi, I am doing experiment in a laboratory scale fluidized bed. Here is my concern, in literature it says that minimum fluidization velocity increases with decrease in bed diameter and vise-versa. but in my experiment i got the reverse. minimum fluidization velocity decreases with decrease of bed diameter for same bed height. (Bed Dia=3.5 cm and 12.3 cm, bed height= 5 cm, particles=: glass beads 1mm spherical).

can any one tell me, why this is happening? is there any explanation for this?

Thanks.


]]> mhsarker http://www.powerplantforum.com/high-low-pressure-boilers/1396-minimum-fluidization-velocity.html http://www.powerplantforum.com/high-low-pressure-boilers/1396-minimum-fluidization-velocity.html games on internet for your daily fun ! http://feedproxy.google.com/~r/PowerPlantForum/~3/hyPJeAnWh8o/1363-games-internet-your-daily-fun.html Fri, 09 Dec 2011 14:55:17 GMT Hello , My name is alexand i`m here because i will like to sell all of you webmasters backlinks . i`m not tring to spam... Hello ,
My name is alexand i`m here because i will like
to sell all of you webmasters backlinks .
i`m not tring to spam you , all i try is to let u know if u need a 1 way back link i can
sell 2 links to you on a Pr2 and Pr4 websites .
in case u are interested please visit and contact me from the website u will like to buy the backlink.


girl games


]]> Relay Protection Etetrethy http://www.powerplantforum.com/relay-protection/1363-games-internet-your-daily-fun.html http://www.powerplantforum.com/relay-protection/1363-games-internet-your-daily-fun.html Industrial Generators http://feedproxy.google.com/~r/PowerPlantForum/~3/dqoZifzAsZM/1266-industrial-generators.html Thu, 08 Dec 2011 08:51:07 GMT Hello All... New to the forum. We are a company that buys and sells new and used diesel generators. If anyone has a good used diesel or natural gas... Hello All... New to the forum. We are a company that buys and sells new and used diesel generators. If anyone has a good used diesel or natural gas generator that wish to sell, please let us know.


]]> Industrial Generators VPE http://www.powerplantforum.com/industrial-generators/1266-industrial-generators.html http://www.powerplantforum.com/industrial-generators/1266-industrial-generators.html