Pro Audio System

Sound System Setup

noreply@blogger.com (Susanto SS Audio) — Sat, 8 Oct 2011 01:21:00 +0700

This is simple diagram for setup Live sound system with :
- Mixer Mackie 3204 VLZ3
- 6 Power Amplifier Behringer
- 2 Power Amplifier QSC
- 3 Equalizer Behringer
- 1 Compressor/Gate Behringer
- 1 Crossover DBX
- 2 Effect Processor Behringer Virtualizer Pro and Alesis MicroVerb

:)

DBX DriveRack® PX Powered Speaker Optimizer

noreply@blogger.com (Susanto SS Audio) — Tue, 27 Sep 2011 00:48:00 +0700

Stereo Feedback Elimination with 12 feedback notch filters
Dual 28-band Graphic EQ
Classic dbx® Compressor
120A Subharmonic Synthesizer
Stereo Multi-band Parametric EQ
Stereo PeakPlus™ Limiters
Pink Noise Generator
Auto-EQ with 28-Band RTA
JBL® and other popular powered speakers included in Setup Wizard
dbx M2 Measurement Mic and zippered pouch included
Front panel RTA-Mic XLR input with phantom power
25 User Programs / 25 Factory Programs
2 Channel XLR Input
2 Channel XLR Output
2 Channel XLR Sub Output
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
dbx Type IV™ Conversion System
Full Graphic LCD Display

Powered speakers are a beautiful thing. Everything you need bundled into one simple, tidy, portable package. Just grab ‘em and go, right? Well, you may think your powered speaker system is complete, but you’re missing half the picture. DriveRack PX is the other half. In another dbx industry first, we’ve created a processor specifically tailored for powered speakers. Utilizing our highly-acclaimed DriveRack technology, the PX picks up where your powered speakers leave off.

The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Our patented Advanced Feedback Suppression (AFS™) kills nasty feedback, allowing problem-free operation at higher sound levels, while our patented Subharmonic Synthesizer™ extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by our graceful PeakPlus™ limiting. Your ears, your audience, and your powered speakers will forever thank you.

In spite of all that sophistication, rest assured we won’t overcomplicate the simplicity of your rig. Our exclusive Setup, Auto-EQ, and AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.

Mackie SR24-4 VLZ Pro

noreply@blogger.com (Susanto SS Audio) — Sat, 6 Aug 2011 03:38:00 +0700

Mackie designed the original SR24-4 and SR32-4 to be the best value 4-bus live sound mixers ever offered. ﾖ But being basically insecure, they decided to make them even better. The new VLZ PRO versions include:

XDR mic preamps with 60dB gain range, 130dB dynamic range, 192kHz bandwidth, 0.0007% THD
Best RFI resistance of any compact SR mixer in the galaxy thanks to advanced DC-pulse transformers.
New ultra-high-performance 2068 op amps for incredibly low noise and distortion
Improved cooling for even greater thermal protection in hot environments.

FEATURES

Premuim XDR mic preamps (20 on the SR24ﾕ4ﾠVLZﾠPRO,
28 on the SR32ﾕ4ﾠVLZﾠPRO)
4 submix buses
6 aux sends (2 pre, 2 post, 2 switchable pre/post)
3-band EQ with sweepable mids (4-band fixed EQ on stereo channels)
75Hz Low cut filter on all mono channels
“Air” EQ on sub buses
Talkback section with level control, LED, and separate rear XLR input
“Double-bused” sub outs for eight track recording without repatching
Inserts on all mono channels and subs
60mm log-taper faders for consistent fades
Balanced XLR and 1/4″ main outputs
Additional mono XLR main out with level control
Balanced inputs and outputs (except phones, inserts, RCAs)
Built-in power supply
12V BNC lamp socket

Behringer EURORACK PRO RX1602

noreply@blogger.com (Susanto SS Audio) — Fri, 5 Aug 2011 01:15:00 +0700

EURORACK PRO RX1602

Professional Multi-Purpose 16-Input Ultra-Low Noise Line Mixer

Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
16 balanced high-headroom line inputs for individual stereo or mono use of each section
Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
Dedicated balance and level controls plus +4/-10 level selection per channel
Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
Monitor/FX signal assignable to phones output for added flexibility
Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
High-quality detented rotary controls for long-term reliability
Shielded toroidal power transformer for lowest noise interference
High-quality component components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

notes : Click then Click on Skip Ads :)

Behringer ULTRAZONE ZMX8210

noreply@blogger.com (Susanto SS Audio) — Thu, 4 Aug 2011 01:51:00 +0700

A professional 8-channel audio mixer designed specifically for fixed installations, the rack mountable ULTRAZONE ZMX8210 zone mixer can distribute music programming and announcements to up to three zones (rooms). Typical applications include restaurants, office areas, health clubs and houses of worship, just to name a few.

ULTRAZONE ZMX8210

Professional 8-Channel 3-Bus Mic/Line Zone Mixer with Remote Control and Link Ports
Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and fixed installation applications

6 ultra-low noise Mic/Line inputs with Gain control, -20 dB Pad, Level/Clip indicator, +48 V phantom power and bus-assign switches
2 selectable high-headroom stereo inputs with mono/stereo switch
Channel 1 provides variable threshold to enable automatic bus mute for announcements, etc.
3 assignable outputs (Left, Right and Aux) with individual Master controls and 5-segment LED meters
Ultra-musical 4-band master EQ and global microphone low-cut filter for perfect sound adjustment
Left, Right, Aux and Mute bus links available including Master/Slave switch for connecting multiple units
Remote master Left/Right level control port for ultimate flexibility
Select switch for routing microphone bus post remote control
Integrated channel muting system with Priority select
All inputs/outputs on Euro-type connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Behringer ULTRALINK PRO MX882

noreply@blogger.com (Susanto SS Audio) — Fri, 15 Jul 2011 09:26:00 +0700

Our compact signal distribution wizard has helped countless musicians and engineers solve diverse problems, whether as a splitter, line mixer or level conditioner. Regardless of your application, the MX882 keeps your signal paths short and clean. And its multiple matching amplifiers allow you to convert home-recording level to professional level and vice versa.

ULTRALINK PRO MX882

Ultra-Flexible 8-Channel Splitter/Mixer

Ultra-low noise 8 in/2 out line mixer and 2 in/8 out line splitter
Each channel can operate independently in mixer or splitter mode
Usable as 6 in/6 out level matching amplifier or direct injection box
Converts levels between -10 dBV and +4 dBu
Extremely wide bandwidth from 5 Hz to 200 kHz for highest signal integrity
6 mono in, 6 mono out, 2 main inputs and 2 outputs
4/8-segment input/output level meters for all channels
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Crest Audio CC5500 Power Amplifier

noreply@blogger.com (Susanto SS Audio) — Fri, 17 Jun 2011 02:48:00 +0700

CC 5500

Design Focus
All CC Series amplifiers are built with tunnel-cooled heat sinks, variable-speed DC fans and extensive protection circuitry for superior efficiency into difficult loads and power conditions. In the Crest Audio tradition, these robust amps also boast more power devices (16 per channel) than any competitive amplifier, plus a switched-rail class H output stage and triple-compound design to provide low distortion and excellent thermal stability. Based on powerful Pro 200. Series technology and utilizing a linear power supply, our three versatile CC Series amps deliver stable high power output for running main systems, monitors and subwoofers.

Features

8 Ohm Stereo - 1150 W
4 Ohm Stereo - 1800 W
2 Ohm Stereo - 2750 W
4 Ohm Bridged - 5500 W
Toroidal power transformer
Magnetic circuit breaker on/off switch
Cooled by variable speed fan with back-to-front airflow
Mode selector switch for stereo, parallel and bridged-mono operation
Inputs: Balanced female XLR, 1/4" TRS combi jacks
Outputs: Speakon(r) and five-way binding posts
Recessed, stepped attenuators
16-gauge steel chassis, cast aluminum front panel
Five-year warranty

Peavey Kosmos® V2 Bass Processor

noreply@blogger.com (Susanto SS Audio) — Thu, 2 Jun 2011 01:57:00 +0700

Kosmos® V2

Second generation sub harmonic and stereo enhancement system drastically improves the listening experience in any space-with any sound system. Replace lost atmosphere and stereo separation as well as that kick in the gut bass that gets lost in the normal system chain.

Controls for sub harmonics, low frequency, high frequency, output level and sub output level
Damping, crossover disable, cut subs from main switches
Mono sum switch
Ins/Outs &emdash
XLR & TRS
Sub out TRS balanced
1RU
Second generation sub bass generator/audio processor
Weight Unpacked: 6.40 lb(2.903 kg)
Weight Packed: 9.00 lb(4.082 kg)
Width Packed: 4"(10.16 cm)
Height Packed: 22.5"(57.15 cm)
Depth Packed: 12.75"(32.385 cm)

Peavey Feedback Ferret® D Feedback Eliminator

noreply@blogger.com (Susanto SS Audio) — Fri, 20 May 2011 01:39:00 +0700

Feedback Ferret® D

Our advanced computer algorithm automatically identifies and suppresses microphone feedback so you can concentrate on running the mix. Just raise the levels on your mics to the onset of feedback. The filters automatically "learn" the problem spots in your system and knock them down with great precision leaving everything else untouched for maximum fidelity. Then during the performance additional filters are constantly standing by to instantly kill any extra, unexpected feedback.

Sixteen individual filters can operate simultaneously (eight dynamically react to input changes)
Stereo or "dual mono" operation which enables 32 dynamically-controlled filters
Set-and-Forget operation in fixed installations such as churches and auditoriums
Four presets for your most common performance venues
Rear panel Defeat button locks out inquiring fingers
Extra Max "Panic" filters for quick control of sudden, severe feedback
Balanced XLR and TRS inputs and outputs
Dynamically suppresses feedback using sophisticated "search & destroy" filters that find, lock in and kill offending frequencies
Weight Unpacked: 15.43 lb(7 kg)
Weight Packed: 18.74 lb(8.5 kg)
Width Packed: 18"(45.72 cm)
Height Packed: 20.75"(52.705 cm)
Depth Packed: 3.875"(9.8425 cm)

Peavey PV® 35XO Crossovers

noreply@blogger.com (Susanto SS Audio) — Sat, 14 May 2011 01:36:00 +0700

PV® 35XO

Peavey reinforces 'performance & value' legacy with new PV Series crossovers.

4-way and 5-way mono operation
Variable state filter controls
24dB/octave LR filters
Mute capabilities for each output level control
XLR (balanced input and outputs on each channel, Phase inversion switch on each band-pass output (except low sum)
Low sum output jack to sum the low frequency, stereo content
3-way stereo operation
Weight Unpacked: 5.00 lb(2.268 kg)
Weight Packed: 7.00 lb(3.175 kg)
Width Packed: 4"(10.16 cm)
Height Packed: 20.25"(51.435 cm)
Depth Packed: 8.62"(21.8948 cm)

Peavey PV® 23XO Crossovers

noreply@blogger.com (Susanto SS Audio) — Sat, 7 May 2011 01:14:00 +0700

PV® 23XO

Peavey reinforces ‘performance & value’ legacy with new PV Series crossovers.

Mute switches
24 dB filters and mute switches
Fully-adjustable crossover frequencies and levels
XLR input and output connectors
Internal power supply
2-way stereo or 3-way mono
Weight Unpacked: 4.41 lb(2 kg)
Weight Packed: 5.29 lb(2.4 kg)
Width Packed: 7.25″(18.415 cm)
Height Packed: 20.5″(52.07 cm)
Depth Packed: 4.25″(10.795 cm)

Peavey VSX™ 48 Crossover

noreply@blogger.com (Susanto SS Audio) — Mon, 2 May 2011 00:41:00 +0700

VSX™ 48

VSX™ 48 Digital Loudspeaker Processor The VSX 48 is a fully progammable 32-bit audio processing and louspeaker management control system. Considerably more powerful than similarly priced units, the VSX 48 provides a versatile and economical alternative for system designers.

Features

5 inputs/8 outputs
48 kHz sample rate – 24-bit 256x over-sampled Delta-Sigma AD, DA
USB A and B ports for memory storage
XLR inputs and outputs
+24 dBu inputs and outputs
Phantom power +48V
Weight Unpacked: 7.50 lb(3.402 kg)
Weight Packed: 10.00 lb(4.536 kg)
Width Packed: 4″(10.16 cm)
Height Packed: 23.62″(59.9948 cm)
Depth Packed: 11.75″(29.845 cm)

Peavey VSX™ 26 Crossover

noreply@blogger.com (Susanto SS Audio) — Sat, 30 Apr 2011 00:25:00 +0700

VSX™ 26

Take control of every facet of your sound reinforcement with Peavey's new VSX loudspeaker management systems. The VSX 26 and VSX 48 feature exclusive Peavey digital processing technology, upgradeable software and functionality for use in single- or multi-zone applications-an all-in-one solution in a single 1U rack space! Any combination of input to output is user configurable to match your system needs. Symmetrical and asymmetrical crossover configurations are user selectable.

FEATURES

48 kHz sample rate, 24-bit 256x over-sampled Delta-Sigma AD, DA
USB A & B ports for memory storage and computer interface (PC and Mac)
XLR inputs and outputs, AES-EBU digital input
+24 dBu inputs and outputs
Phantom power +48 volt
Built-in signal generator (white, pink, sine)
Easy preset and system updates via Internet
Fully adjustable crossover points
Easy-to-read LCD screen
Features per input: 27-band Graphic EQ Autograph(r) algorithm for automatic EQ settings, Compressor/Limiter, Delay (340 ms)
Features per output: Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), Parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass), Compressor/Limiter, Delay with polarity inversion
2 input/6 output loudspeaker DSP management system
Weight Unpacked: 7.00 lb(3.175 kg)
Weight Packed: 9.00 lb(4.082 kg)
Width Packed: 4"(10.16 cm)
Height Packed: 23.62"(59.9948 cm)
Depth Packed: 11.75"(29.845 cm)

Peavey Impulse® 12D Powered Speaker

noreply@blogger.com (Susanto SS Audio) — Thu, 28 Apr 2011 00:03:00 +0700

Impulse® 12D

The new Impulse® 12D powered enclosure features a true ribbon driver and a 12″ field-replaceable dual voice coil premium neodymium speaker. A Woofer Servo circuit monitors back-EMF and controls cone motion, ensuring the cone’s movement mirrors the driving signal from the power amp, and resulting in very low distortion, high power handling and rock-solid low-frequency attack. The advanced new ribbon driver–an exclusive Peavey design based on the ribbons used in the Peavey Versarray™ line array provides 90° H x 30° V coverage, with sonically transparent reproduction.
Utilizing Peavey’s revolutionary IPR™ power amplifier technology, the Impulse 12D produces 1,200 watts of efficient power while weighing a very lightweight 39 lbs. IPR amplifiers are designed with a lightweight switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available.
The Input section features two input channels and a line output, with a mix of I/O options such as combination XLR-1/4″ jacks, RCA and install-ready Phoenix connections. Input channels 1 and 2 also have mic/line source switches and gain controls. The Auto-Off function automatically shuts off the power when it no longer detects a signal, while the Line Out allows the user to chain multiple units or send the input signal to another source.
The DynaQ™ section offers advanced tone controls such as Bass Enhancer, which is an overall loudness boost; a Music/Speech switch that provides optimized EQ settings for each audio type; and Contour, specially configured for program music. A module bay allows for future expansion including Wireless I/O, Delay/Time Adjustment, Mixer Expander, Ethernet I/O and more.
The Impulse 12D is housed in a durable, injection-molded enclosure that includes a pole mount, three flying points and a tilt-back design to facilitate use as a personal monitor.

Peavey PV® 231 Equalizer

noreply@blogger.com (Susanto SS Audio) — Sun, 24 Apr 2011 00:00:00 +0700

PV® 231EQ

The PV® 231EQ dual 31-band 2/3 octave graphic EQ brings quality features and low pricing together. Select between 6 dB or 12 dB cut or boost over frequencies ranging from 20 Hz to 20 kHz. Low cut filter switch with status LED helps remove rumble from open mics while the bypass switch with LED indicator is convenient for sound checks.

Features

2 RU dual 31-band
Switchable 12-band or 6 dB boost/cut range
Variable 24 dB low cut filter
Variable 24 dB high cut filter
XLR balanced I/O
Output level LEDs
Bypass switch with status LED
Center-detent control sliders
Weight Unpacked: 7.00 lb(3.175 kg)
Weight Packed: 9.00 lb(4.082 kg)
Width Packed: 5.87″(14.9098 cm)
Height Packed: 20.5″(52.07 cm)
Depth Packed: 9.62″(24.4348 cm)

Peavey EU 218 Sub

noreply@blogger.com (Susanto SS Audio) — Thu, 24 Mar 2011 01:36:00 +0700

EU 218 Sub

The Peavey EU 218 Sub achieves astounding performance, compact size and light weight through a pair of 18″ neodymium-loaded loudspeakers arranged in a vented, isobaric chamber. For a subwoofer that produces massive low-end perforamnce in a smaller enclosure than a typical 1×18 sub, and up to 3,000 watts peak power handling, look no further!

Features

1500 Watts of program power rating
Dual Peavey high performance 18″ Neo Woofers
Vented cabinet with Isobaric chamber configuration
Four-pin twist lock professional input connectors
Compact light-weight design for a dual 18″ system
Speaker pole mount built in
Heavy-duty steel handles inset on both sides
Durable GatorHyde(r) finish
Full-length steel grille for speaker protection
Weight Unpacked: 76.50 lb(34.7 kg)
Weight Packed: 86.00 lb(39.009 kg)
Width Packed: 26.875″(68.2625 cm)
Height Packed: 29.25″(74.295 cm)
Depth Packed: 24.625″(62.5475 cm)

DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover

noreply@blogger.com (Susanto SS Audio) — Thu, 17 Mar 2011 01:12:00 +0700

DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover

XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all band outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant

SPECS :

INPUT

Connectors: XLR
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced >50k ohm, unbalanced >25k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >50dB at 1kHz

OUTPUTS

Connectors: XLR
Type: Electronically-balanaced/unbalanced, RF filtered
Impedance: Balanced 60 ohm, unbalanced 300 ohm
Max Output Level: >+20dBu balanced/unbalanced into 600 ohms or greater

SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB
Signal-to-Noise: Ref: +4 dBu, 22 kHz measurement bandwidth
Stereo Mode : >94dB (Low Output) >93dB (Mid Output) >92dB (High Output)
Mono Mode: >94dB (Low Output) >94dB (Low/Mid Output) >92dB (High/Mid Output) >92dB (High Output)
Dynamic Range: > 114 dB, unweighted, any output
THD + Noise: < 0.004% at +4 dBu, 1 kHz < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz

CROSSOVER FREQUENCIES
Stereo Mode:

Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Mono Mode:

Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
High-Mid/High450 Hz to 9.6 kHz
Low-Mid/High-Mid450 Hz to 9.6 kHz

Filter type: Linkwitz-Riley, 24 dB/octave, state-variable

FUNCTION SWITCHES
Front Panel (Low Cut):

Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
Phase Invert: Inverts the phase at the output, one switch per output

Rear Panel:

x1 / x10:Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel
Mode:Selects stereo 2-way, 3-way or mono 4-way operation and disables all LEDs for controls that are non-functional in the mono mode
LF sum:Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode

INDICATORS

Stereo Operation: Green LED
Mono Operation: Yellow LED
Low Cut: Red LED per channel
x10 Green LED per channel
Phase Invert: Red LED per output (3 per channel)

POWER SUPPLY

Operating Voltage:100-120 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50 Hz
Power consumption: 15W
Main Connection: IEC 320 receptacle

PHYSICAL

Dimensions: 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Weight:4.0 lbs. (1.8 kg)
Shipping Weight:5.8 lbs. (2.6 kg)

DBX 2231 Graphic Equalizer/Limiter with Type III™

noreply@blogger.com (Susanto SS Audio) — Mon, 7 Mar 2011 01:36:00 +0700

DBX 2231 Graphic Equalizer/Limiter with Type III™

Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
Four segment LED bargraph for BOTH Gain Reduction AND Output Level
Status LEDs offer visual feedback for all settings on the front panel

Specs:

INPUT

Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz

OUTPUTS

Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k or greater >+20dBm balanced/unbalanced (into 600)

SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Noise Reduction In: (+/-6 and +/-12dB range):
Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >120dB, unweighted
Noise Reduction Out: (+/-6dB range):
Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range: >112dB, unweighted
Noise Reduction Out: (+/-12dB range):
Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >108dB, unweighted
THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
Noise Reduction: Up to 20dB of dynamic broadband noise reduction

FUNCTION SWITCHES

Type III® NR: Activates dbx® Type III® Noise Reduction
EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range

INDICATORS

Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III® NR Active: Yellow LED
EQ Bypass: Red LED
Clip: Red LED
Low Cut Active: Red LED
+/-6dB range: Yellow LED
+/-12dB range: Red LED

POWER SUPPLY

Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz
Power consumption: 23W
Main Connection: IEC receptacle

PHYSICAL

Dimensions: 5.25" H X 19" W X 7.9" D (13.335cm x 48.3cm x 20.1cm)

Mackie CFX12 MK II Live Mixers

noreply@blogger.com (Susanto SS Audio) — Sun, 20 Feb 2011 07:50:00 +0700

Mackie CFX12 MK II

12 CHANNELS OF MACKIE MIXING WITH SUPERB BUILT-IN EFFECTS
Designed to take the hassle out of mixing live performances, Mackie's CFX.mkII Series compact live sound mixers feature genuine Mackie mic preamps, four subgroups, precise nine-band stereo graphic equalizers for greater sonic control, and onboard EMAC™ 32-bit digital effects—eliminating the need for outboard effects processors and cables. Combined with Mackie Active loudspeakers, the CFX.mkII mixers are part of a complete, easy-to-use Mackie sound system.

THE FEATURES YOU NEED TO GET THE JOB DONE
NOT JUST ANY OLD EFFECTS
TOUGH ENOUGH FOR LIVE

Features

High-headroom mic preamps with RF rejection
12 channels (8 mic/line mono, and 2 stereo line channels)
32-bit EMAC™ digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander
External and internal EFX sends
EFX to Monitor control
9-band stereo graphic equalizer
Inserts on all mic channels and main mix
True 4-bus design with direct sub outs and L/R assign
2 Pre/Post Aux sends and internal/external FX level sends on each channel
3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels
4-band EQ on stereo line channels
Pan, Mute, PFL solo on each channel
Inserts and 100Hz low-cut filters on all mic/line channels
Subwoofer output from built-in 18dB/oct. 75Hz crossover
Ingenious BREAK switch
Headphone output with level control
Tape/CD inputs with level control assignable to Main Mix via Break switch
Logarithmic taper 60mm faders
48V phantom power
12V BNC lamp jack

DBX DriveRack® 4820 Loudspeaker Management System

noreply@blogger.com (Susanto SS Audio) — Sat, 12 Feb 2011 07:50:00 +0700

DriveRack® 4820

Loudspeaker Management System

Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack 4820 is the next member of the hugely successful of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the tamper-proof front panel, the 4820 provides all the processing, flexibility and control necessary for permanent installations.

The DriveRack 4820 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide “Everything you need between the mixer and the power amps”. In keeping with this philosophy the 4820 includes four inputs and eight outputs with both analog and digital connectivity. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world’s leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack 4820 provides a tamper-proof front panel, and is controlled by an easy-to-use GUI with optional wall panel controllers; so whether you application is Front of House system processing or Distributed system control, the DriveRack 4820 has what it takes.

48 and 96 kHz operation
4 analog and AES/EBU inputs
8 analog and AES/EBU outputs
Full Bandpass Filters, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters
31-Band Graphic and 9-band Parametric EQ on every output
6-band Parametric EQ on every output
Loudspeaker Cluster and Driver Alignment Delays
Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others
Ethernet HiQnet™ networking control
Optional dbx ZC wall panel control
Optional Jensen® I/O Transformers

DBX DriveRack® PX Powered Speaker Optimizer

noreply@blogger.com (Susanto SS Audio) — Mon, 7 Feb 2011 07:40:00 +0700

Stereo Feedback Elimination with 12 feedback notch filters
Dual 28-band Graphic EQ
Classic dbx® Compressor
120A Subharmonic Synthesizer
Stereo Multi-band Parametric EQ
Stereo PeakPlus™ Limiters
Pink Noise Generator
Auto-EQ with 28-Band RTA
JBL® and other popular powered speakers included in Setup Wizard
dbx M2 Measurement Mic and zippered pouch included
Front panel RTA-Mic XLR input with phantom power
25 User Programs / 25 Factory Programs
2 Channel XLR Input
2 Channel XLR Output
2 Channel XLR Sub Output
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
dbx Type IV™ Conversion System
Full Graphic LCD Display

DBX 1231 Dual Chanel 31-Band Equalizer

noreply@blogger.com (Susanto SS Audio) — Mon, 31 Jan 2011 07:32:00 +0700

1231

Dual Chanel 31-Band Equalizer

The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4” TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.

Switchable boost/cut ranges of ±6 or ±15 dB
Electronically balanced/unbalanced inputs
Servo balanced/unbalanced outputs
RF filtered inputs and outputs
XLR, Barrier Strip, and 1/4″ TRS connectors
-12dB/+12dB input gain range
18dB/octave 40Hz Bessel low-cut filter
Chassis/signal ground lift capability
Internal power supply transformer
Power-off hardwire relay bypass with 2-second power-up delay

Behringer VIRTUALIZER 3D FX2000

noreply@blogger.com (Susanto SS Audio) — Sun, 23 Jan 2011 02:26:00 +0700

VIRTUALIZER 3D FX2000

High-Performance 3D Multi-Engine Effects Processor

71 breathtaking new algorithms—true RSM (Real Sound Modeling) stereo and 3D effects
Wave-adaptive virtual Room reverb algorithms for natural reverb and delay
Awesome modulation, dynamic, psychoacoustic and EQ algorithms
Authentic amp simulation, distortion and special effects
11 effect combinations with selectable serial / parallel configuration
Up to 7 adjustable parameters plus 2-band EQ per effect
24-bit A/D and D/A converters with 64/128-times oversampling
True stereo processing for realistic channel separation in stereo image
100 factory presets plus 100 user memory locations
Extensive MIDI implementation
Accurate LED level meters for perfect level setting and optimum performance
Servo-balanced XLR and ¼” TRS inputs and outputs
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Behringer EUROPOWER EPX4000

noreply@blogger.com (Susanto SS Audio) — Mon, 17 Jan 2011 10:09:00 +0700

EUROPOWER EPX4000

Professional 4000-Watt Lightweight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

2 x 2000 Watts into 2 Ohms; 2 x 1200 Watts into 4 Ohms; 4000 Watts into 4 Ohms (bridge mode)

ATR (Accelerated Transient Response) technology for ultimate punch and clarity

Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

Switchable limiters offer maximum output level with reliable overload protection

Detented gain controls for precise setting and matching of sensitivity

Precise Power, Signal and Limit LEDs to monitor performance

XLR , 1/4'' TRS and RCA input connectors for compatibility with any source

Professional speaker connectors and ''touch-proof'' binding posts support most speaker wiring systems

Built-in Subwoofer/Satellite crossover for more flexibility

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

“Back-to-front” ventilation system including air filter for reliable operation

''Built-like-a-tank'', impact-resistant, all-steel 2U rackmount chassis

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by BEHRINGER Germany

Behringer EUROPOWER EPX3000

noreply@blogger.com (Susanto SS Audio) — Wed, 12 Jan 2011 09:59:00 +0700

EUROPOWER EPX3000

Professional 3,000-Watt Light Weight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

2 x 1,500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3,000 Watts into 4 Ohms (bridge mode)

ATR (Accelerated Transient Response) technology for ultimate punch and clarity

Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

Switchable limiters offer maximum output level with reliable overload protection

Detented gain controls for precise setting and matching of sensitivity

Precise Power, Signal and Clip LEDs to monitor performance

XLR , 1/4" TRS and RCA input connectors for compatibility with any source

Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems

Built-in Subwoofer/Satellite crossover for more flexibility

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

“Back-to-front” ventilation system including air filter for reliable operation

"Built-like-a-tank", impact-resistant, all-steel 2U rackmount chassis

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by BEHRINGER Germany

Pro Audio System

Sound System Setup

DBX DriveRack® PX Powered Speaker Optimizer

Mackie SR24-4 VLZ Pro

FEATURES

Behringer EURORACK PRO RX1602

EURORACK PRO RX1602

Professional Multi-Purpose 16-Input Ultra-Low Noise Line Mixer

Behringer ULTRAZONE ZMX8210

ULTRAZONE ZMX8210

Professional 8-Channel 3-Bus Mic/Line Zone Mixer with Remote Control and Link Ports Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and fixed installation applications

Behringer ULTRALINK PRO MX882

ULTRALINK PRO MX882

Ultra-Flexible 8-Channel Splitter/Mixer

Crest Audio CC5500 Power Amplifier

Peavey Kosmos® V2 Bass Processor

Kosmos® V2

Peavey Feedback Ferret® D Feedback Eliminator

Feedback Ferret® D

Peavey PV® 35XO Crossovers

PV® 35XO

Peavey reinforces 'performance & value' legacy with new PV Series crossovers.

Peavey PV® 23XO Crossovers

PV® 23XO

Peavey reinforces ‘performance & value’ legacy with new PV Series crossovers.

Peavey VSX™ 48 Crossover

VSX™ 48

Features

Peavey VSX™ 26 Crossover

VSX™ 26

FEATURES

Peavey Impulse® 12D Powered Speaker

Impulse® 12D

Peavey PV® 231 Equalizer

PV® 231EQ

Features

Peavey EU 218 Sub

EU 218 Sub

Features

DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover

DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover

DBX 2231 Graphic Equalizer/Limiter with Type III™

DBX 2231 Graphic Equalizer/Limiter with Type III™

Specs:

Mackie CFX12 MK II Live Mixers

Mackie CFX12 MK II

Features

DBX DriveRack® 4820 Loudspeaker Management System

DriveRack® 4820

Loudspeaker Management System

DBX DriveRack® PX Powered Speaker Optimizer

DBX 1231 Dual Chanel 31-Band Equalizer

1231

Dual Chanel 31-Band Equalizer

Behringer VIRTUALIZER 3D FX2000

VIRTUALIZER 3D FX2000

High-Performance 3D Multi-Engine Effects Processor

Behringer EUROPOWER EPX4000

EUROPOWER EPX4000

Professional 4000-Watt Lightweight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Behringer EUROPOWER EPX3000

EUROPOWER EPX3000

Professional 3,000-Watt Light Weight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

Professional 8-Channel 3-Bus Mic/Line Zone Mixer with Remote Control and Link Ports
Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and fixed installation applications