Online Mobile Hardware & Software Guide

Master Box3.2 Update V826 Launched

2012-01-13T18:36:00.000+05:00

Download

Nokia 101 Solution

2012-01-12T18:11:00.000+05:00

Nokia 101 Charging Solution

Nokia 101 dead or not power with battery

Nokia 101 LCD ways

Nokia 101 MIC solution

Nokia 101 MMC problem

Nokia 101 ringer and speaker solution

Nokia 101 net working solution -1

Nokia 101 Sim solution

Dragon box Pinfinding Problem Solved

2012-01-12T16:16:00.000+05:00

Open your Gpg Dragon box
Connect your box to A-B connector
While your box is connected, connect you multitester rod shown to this image...

after you hear a beep....disconect mutitester....
then disconnect A-B connector...
then wait a few minutes.....
then reconnect box...
then upgrade your box firmware to this: Firmware 1.58
then your box is back to work again....

Smart Movie 4.15 by Qureshi Mobile (no licence key required)

2011-12-20T15:49:00.001+05:00

NO NEED TO POST IMEI...

NO NEED ANY LICENCE KEY...

NO NEED INTERNET AUTHENTICK...

NO NEED TO UPDATE SMARTMOVIE...

NO NEED GPRS CONNECTION...

NO NEED TO HACK PHONES..

NO NEED TO CHANGE PHONE DATE...

here i post latest smartmovie fully registerd working in all s60v3,s60v5,anna,belle,all latest suppoerted phones...

just install 2 files step by step..

ur smartmovie working lifetime

www.qureshimobiles.com

DOWNLOAD

Definition of Abbreviations on Mobile Phones Circuit

2011-12-14T12:20:00.000+05:00

0
2G 2nd Generation

3G 3rd Generation

3Gs 3rd Generation speed

4G 4th Generation

A
A/D-converter Analog-to-digital converter

ACI Accessory Control Interface

ADC Analog-to-digital converter

ADSP Application DPS (expected to run high level tasks)

AGC Automatic gain control (maintains volume)

ALS Ambient light sensor

AMSL After Market Service Leader

ARM Advanced RISC Machines

ARPU Average revenue per user (per month or per year)

ASIC Application Specific Integrated Circuit

ASIP Application Specific Interface Protector

B
B2B Board to board, connector between PWB and UI board

BB Baseband

BC02 Bluetooth module made by CSR

BIQUAD Bi-quadratic ,type of filter function)

BSI Battery Size Indicator

BT Bluetooth

C
CBus MCU controlled serial bus connected to UPP_WD2,UEME and Zocus

CCP Compact Camera Port

CDSP Cellular DSP (expected to run at low levels)

CLDC Connected limited device configuration

CMOS Complimentary metal-oxide semiconductor circuit (low power consumption)

COF Chip on Foil

COG Chip on Glass

CPU Central Processing Unit

CSR cambridge silicon radio

CSTN Color Super Twisted Nematic

CTSI Clock Timing Sleep and interrupt block of Tiku

CW   Continuous wave

D
D/A-converter   Digital-to-analouge converter

DAC Digital-to-analouge converter

DBI Digital Battery Interface

DBus DSP controlled serial bus connected between UPP_WD2 and Helgo

DCT-4 Digital Core Technology

DMA Direct memory access

DP    Data Package

DPLL Digital Phase Locked Loop

DSP Digital Signal Processor

DtoS Differential to Single ended

E
EDGE Enhanced data rates for global/GSM evaluation

EGSM Extended GSM

EM Energy management

EMC Electromagnetic compability

EMI Electromagnetic interference

ESD Electrostatic discharge

F
FCI Functional cover interface

FPS Flash Programming Tool

FR Full rate

FSTN Film compensated super twisted nematic

G
GND Ground, conductive mass

GPIB General-purpose interface bus

GPRS General Packet Radio Service

GSM Group Special Mobile/Global System for Mobile communication

H
HF Hands free

HFCM Handsfree Common

HS Handset

HSCSD High speed circuit switched data (data transmission connection faster than GSM)

HW Hardware

I
I/O Input/Output

IBAT Battery current

IC Integrated circuit

ICHAR Charger current

IF Interface

IHF Integrated hands free

IMEI International Mobile Equipment Identity

IR Infrared

IrDA Infrared Data Associasion

ISA Intelligent software architecture

J
JPEG/JPG Joint Photographic Experts Group

L
LCD Liquid Crystal Display

LDO Low Drop Out

LED Light-emitting diode

LPRF Low Power Radio Frequency

M
MCU Micro Controller Unit (microprocessor)

MCU Multiport control unit

MIC, mic Microphone

MIDP Mobile Information Device Profile

MIN Mobile identification number

MIPS Million instructions per second

MMC Multimedia card

MMS Multimedia messaging service

N
NTC Negative temperature coefficient, temperature sensitive resistor used as a

temperature sensor

O
OMA Object management architechture

OMAP Operations, maintenance, and administartion part

Opamp Operational Amplifier

P
PA Power amplifier

PDA Pocket Data Application

PDA Personal digital assistant

PDRAM Program/Data RAM (on chip in Tiku)

Phoenix Software tool of DCT4.x

PIM Personal Information Management

PLL Phase locked loop

PM (Phone) Permanent memory

PUP General Purpose IO (PIO), USARTS and Pulse Width Modulators

PURX Power-up reset

PWB Printed Wiring Board

PWM Pulse width modulation

R
RC-filter Resistance-Capacitance filter

RF Radio Frequency

RF PopPort TM Reduced function PopPortTM interface

RFBUS Serial control Bus For RF

RSK Right Soft Key

RS-MMC Reduced size Multi Media Card

RSSI Receiving signal strength indicator

RST Reset Switch

RTC Real Time Clock (provides date and time)

RX Radio Receiver

S
SARAM Single Access RAM

SAW filter Surface Acoustic Wave filter

SDRAM Synchronous Dynamic Random Access Memory

SID Security ID

SIM Subscriber Identity Module

SMPS Switched Mode Power Supply

SNR Signal-to-noice ratio

SPR Standard Product requirements

SRAM Static random access memory

STI Serial Trace Interface

SW Software

SWIM Subscriber/Wallet Identification Module

T
TCXO Temperature controlled Oscillator

Tiku Finnish for Chip, Successor of the UPP, Official Tiku3G

TX Radio Transmitter

U
UART Universal asynchronous receiver/transmitter

UEME Universal Energy Management chip (Enhanced version)

UEMEK See UEME

UI User Interface

UPP Universal Phone Processor

UPP_WD2Communicator version of DCT4 system ASIC

USB Universal Serial Bus

V
VBAT Battery voltage

VCHAR Charger voltage

VCO Voltage controlled oscillator

VCTCXO Voltage Controlled Temperature Compensated Crystal Oscillator

VCXO Voltage Controlled Crystal Oscillator

Vp-p Peak-to-peak voltage

VSIM SIM voltage

W
WAP Wireless application protocol

WD Watchdog

X
XHTML Extensible hypertext markup language

Z
Zocus Current sensor, (used to monitor the current flow to and from the battery)

Nokia Lumia 800 And Lumia 710 Released First Nokia Windows Phone Devices

2011-10-27T00:29:00.000+05:00

Nokia revealed their first Windows Phone devices today at an event at the Excel Center in London, UK. The two new devices named Lumia 800 and Lumia 710 are result of the $1 billion deal between Nokia and Microsoft that took place earlier this year.
Nokia Lumia 800:

The stunningly social Nokia Lumia 800 features head-turning design, vivid colors (cyan, magenta and black) and the best social and Internet performance, with one-touch social network access, easy grouping of contacts, integrated communication threads and Internet Explorer 9. It features a 3.7 inch AMOLED ClearBlack curved display blending seamlessly into the reduced body design, and a 1.4 GHz processor with hardware acceleration and a graphics processor. The Nokia Lumia 800 contains an instant-share camera experience based on leading Carl Zeiss optics, HD video playback, 16GB of internal user memory and 25GB of free SkyDrive storage for storing images and music. The estimated retail price for the Nokia Lumia 800 will be approximately 420 EUR, excluding taxes and subsidies.

Nokia Lumia 710:

The purposely built, no-nonsense Nokia Lumia 710 can be personalized with exchangeable back covers and thousands of apps to bring the Lumia experience to more people around the world. The Nokia Lumia 710 is designed for instant social & image sharing, and the best browsing experience with IE9. It is available in black and white with black, white, cyan, fuchsia and yellow back covers. With the same 1.4 GHz processor, hardware acceleration and graphics processor as the Nokia Lumia 800, the Nokia Lumia 710 delivers high performance at an affordable price. The estimated retail price for the Nokia Lumia 710 will be approximately 270 EUR, excluding taxes and subsidies.

The new Nokia Lumia 800 is now available in select countries for pre-order on www.nokia.com and is scheduled to roll-out across France, Germany, Italy, the Netherlands, Spain and the UK in November, with 31 leading operators and retailers providing unprecedented marketing support in those first six countries. It is scheduled to be available in Hong Kong, India, Russia, Singapore and Taiwan before the end of the year, and in further markets in early 2012. The Nokia Lumia 710 is scheduled to be available first in Hong Kong, India, Russia, Singapore and Taiwan toward the end of the year alongside the Nokia Lumia 800, before becoming available in further markets in early 2012.

Source

IDM For Lifetime 100% Working _ by _ Qureshi Mobiles

2011-10-23T11:06:00.002+05:00

IDM For Lifetime 100% Working _ by _ Qureshi Mobiles
Internet download manager is one of the most popular and the best download manager tool. Most of we prefer IDM for our downloading purpose because of it’s awesome features. But this useful application is not free, we have to pay and buy this application. It comes with 1 month trial period and after the validity ends you have to buy this application. Most of we use patches and cracked version of IDM, but we don’t think that most of the patches or cracked software may contain virus. So here I will describe you how to crack IDM manually so that you will be safe from possible virus attack and also you will get lifetime validity on your IDM. When we update IDM it shows that IDM is registered with fake serial number but IDM exists, then it will stop downloading. By using this trick your IDM is registered for life time and you will not get any error while updating next time.

STEP 1. Go to this file location C:\WINDOWS\system32\drivers\etc

STEP 2. Now we will edit hosts file . Open hosts file in notepad

STEP 3. In notepad you have to copy and paste some data

127.0.0.1 tonec.com
127.0.0.1 http://www.tonec.com
127.0.0.1 registeridm.com
127.0.0.1 http://www.registeridm.com
127.0.0.1 secure.registeridm.com
127.0.0.1 internetdownloadmanager.com
127.0.0.1 http://www.internetdownloadmanager.com
127.0.0.1 secure.internetdownloadmanager.com
127.0.0.1 mirror.internetdownloadmanager.com
127.0.0.1 mirror2.internetdownloadmanager.com

STEP 4. Save the hosts file .

STEP 5. Register using serial

RLDGN-OV9WU-5W589-6VZH1
HUDWE-UO689-6D27B-YM28M
UK3DV-E0MNW-MLQYX-GENA1
398ND-QNAGY-CMMZU-ZPI39
GZLJY-X50S3-0S20D-NFRF9
W3J5U-8U66N-D0B9M-54SLM
EC0Q6-QN7UH-5S3JB-YZMEK
UVQW0-X54FE-QW35Q-SNZF5
FJJTJ-J0FLF-QCVBK-A287M

Your IDM is now converted into full version. It will now works 100%. You do not need to register again or patch after you update your IDM again.

Special Thanks : Qureshi Mobiles

MXBOX SL3instant unlock activations accepted in new Firmware - v3.5 revision 1.4

2011-10-09T11:28:00.002+05:00

MXKEY/MXBOX v3.5 revision 1.4, Public-Release
MEGA UPDATE

What is new added, changes and improvements:

MAIN
1. introduced HTI Firmware version 00.24

new in firmware:
- firmware accept SL3instant unlock activations for MXBOX
- bugfixed: BB5 security repair algorithm for RAPIDO new ASIC
- implemented WD2 and BTMCM flashing protocol
- implemented TIKU and MM(NAND) flashing protocol
please Update HTI by using "Update HTI" button or "HTIUpdate.exe"

2. improved: antivirus compatibility.

3. improved: daily update check routine.

4. improved: built-in downloader routine
- added: resume support
- bugfixed: handing big file size(more than 1G)

5. added: support for upcomming windows 8(windows developer preview) support.

6. added: Detailed 'LastError' message window when No Security Dongle Detected

7. added: Detailed HTI identity(boot & fw version, serial) on connect.

New Application released:

MXKEY - Fire Agent(fire.exe)
it's brand new support tool and firmwares download support client

1. Using shared configuration with corresponding module,
simplify the needs to download/update firmware file.

2. Working in sync mode with modules for better usage.

3. using built-in downloader with resume support.

Supported services:

1. Nokia firmware, along with latest firmware notification info

2. CDMA firmware, various vendor(Alcatel, Haier, Huawei, LG, Nokia, ZTE)

3. more services to be added at the future

Nokia Tool

- important informations (Asic ID, ROOT KEY HASH, UEM Imei) now highlighted (beginner friendly).

- added: BB5 security repair function for RAPUv2 phones (beta testing)

- added: Verify Secure Data at 'Read SL3 Hash'/'Read Phone IDs',
(used to verify if secure data readed from the phone is valid to make sure
the hash readed by software(both USB/FBUS) is 100% correct)

- added: "Fire Support" menu in module`s options.

- added: support to load variant definitions created by fire.exe

- added: Spesified window dialog when card is busy/used by other module to fire.exe, sl3u.exe.

- added: support to convert log to other third party format to SL3BF module (sl3u.exe)

- added: new definition to 'phoneIdentity.ini.default'

- added: flash loader version 11.24.000.3 to setup

- added: RPL backup list load at scan (used for "Write Rpl' with 'Use RPL file' ticked)

- added: PM backup list load at scan

- improved: module initialization.

- improved: 'phone definitions loading' at first load.

- improved: 'HTI Auto BSI(SoftTMA)' set.

- improved: file/image version check routine.

- improved: Reboot after flash mode

- improved: WD2 flashing with HTI

- bugfixed: BTMCM flashing bug with HTI

- bugfixed: No Security Dongle Detected when HTI connected with phone
(HTI power switched off on load)

- bugfixed: RAPIDO New Asic security repair function

CDMA Tool

- added: "Fire Support" menu in module`s options.

download MxBox/MxKey v3.5 rev1.4 for FREE

Nokia 6303c after Low battery whitescreen 100% tested solution

2011-10-08T09:44:00.002+05:00

Nokia 6303c after Low battery whitescreen 100% tested solution
try this solution step by step.

How to Identify Component Symbols on Nokia Schematic Diagram

2011-10-05T13:43:00.000+05:00

How to Identify Component Symbols on Nokia Schematic Diagram Identifying with Symbols on Schematic Diagram is very easy task, it's just like reading ABC's on English alphabet.

Since we are talking about mobile phone's circuit here, we are going to tackle only on its symbols being used herein, unlike in some major electronics components which have a lot of component symbols. Mostly, because Cellphone circuits have a lot of Integrated Circuit ( IC ) meaning the circuits is being compact into a smaller circuit to produce, and save a very small space to put a huge circuit connection into one tiny piece of circuits.
I have inserted the Layout of each component and how it's look's like mounted on a PCB ( Printed Circuit Board) for better and easiest way of understanding.

Simply Click on Components Category for more Detailed Infos.

More Detailed Infos

NOKIA 101 RM-769 Flash Files Urdu,Arabic,English _ www.gsmpakhosting.com

2011-10-03T10:59:00.000+05:00

NOKIA 101 RM-769 Flash Files Urdu,Arabic,English _ www.gsmpakhosting.com

Download Link

How To Install/Change Camera iPhone 3GS

2011-10-02T10:10:00.000+05:00

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
How To Install/Change Camera iPhone 3GS
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

1st Step
Remove the two Phillips #00 screws from the dock-connector end of the iPhone.

2nd Step
Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
Be very careful when opening the iPhone so that the cables under the display are not severed.
Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
If the display assembly is to damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape maybe used.

3rd Step
The display assembly is still connected to the iPhone by several cables, so don't try to remove it entirely just yet.
Rotate the display assembly up until it is at an angle of approximately 45 degrees.

4th Step
Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."

5th Step
Rotate the display assembly up until it is roughly vertical. This will allow easier access for disconnecting the remaining cables.
Use a spudger to disconnect the black ribbon cable labeled "2."

6th Step
Use a spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.

7th Step
Insert your SIM eject tool or a paper clip into the hole next to the headphone jack.
Press down on the tool until the SIM card tray pops out.Grasp the SIM card tray and slide it out of the iPhone.

8th Step
Use a spudger to disconnect the ribbon cable labeled "4."

9th Step
Use a spudger to disconnect the ribbon cable labeled "5."

10th Step
Use a spudger to disconnect the ribbon cable labeled "6."
If you have an iPhone 3GS, refer to picture 2 and use a spudger to disconnect the ribbon cable labeled "7."

11th Step
Carefully peel up the small sticker labeled "Do not remove."

12th Step
Remove the following 8 screws:Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear panel.
Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera.
One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.

13th Step
Use a spudger to gently pry the camera up and out of its housing in the rear panel. The camera cannot be removed entirely yet because it's connected to the bottom of the logic board.

14th Step

Use a spudger to gently pry up the end of the logic board closest to the dock connector.
If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.

15th Step
Slide the logic board towards the dock connector and out of the iPhone.

16th Step
Use a spudger to disconnect the camera from the logic board.

Official Nokia Data Package Manager 2011.20.0 for Level 3

2011-10-02T09:21:00.003+05:00

New version 2011.35.2 of the Nokia Data Package Manager Tool is available. This version should be used on all service levels, it replaces both earlier versions of the Data Package Manager Tool

Data Package Manager Lite v 2011.24.1 for Levels 1-2
Data Package Manager 2011.20.0 for Level 3

Releases of the DPM Lite tool have been discontinued, please uninstall DPM Lite 2011.24.1 from your PC before you install DPM 2011.35.1 or newer.

Introduction:

Nokia Data Package Manager is a service software tool which provides following functions:
• Real Time downloading of product software files via online connection from Nokia Firmware Repository (FiRe)
• Scheduled downloading of product software files via online connection from Nokia Firmware Repository (FiRe)
• Search function and creation of filters for the data you need to download.
• Checking and organizing your locally installed product software content.
Nokia Data Package Manager Tool is an independent tool, but it can also be used on same PC with other Nokia Service Software Applications, such as Phoenix or Care Suite
Please note that this full version of the Nokia Data Package Manager should not be installed on the same PC with Nokia Data package Manager Lite
Please refer to the attached user guide document for more details and instructions

Changes and Improvements from previous version 2011.20.0:

Variant Data quiery method changed to reduce load on Firmware Repository servers.
The results of the query are cached for 1 hour. If FiRe connection is lost, cache is not cleared and downloading can continue by using cached URLs.
After application crash on-going activities are recovered (like in Firefox web browser).
Support for 9-15 characters length product code.
Scheduler can be suspended so that downloading with Browser is still possible.
Scheduler will show a notification to user in case of constant download failure.
This version of DPM replaces both earlier versions of DPM ( Full and Lite ). Releases for DPM Lite have been discontinued and DPM Lite releases should be uninstalled from PC before DPM 2011.35.2 is installed

Download Here: http://www.mirrorcreator.com/files/0R4XTGAT/NokiaDataPackageManager-2011_35_2.msi_links

Nokia Care Suite 4 Store 2011.18.3 (Free Original Nokia USB Flasher)

2011-10-02T09:04:00.001+05:00

Tested and Working

Pass: genuine

Description:
Care Suite (CS) is a Multi-protocol software who support latest nokia CDMA,GSM and WCDMA (328 models covered)
It's a Free software (OpenSSL), relased by Nokia Care for stores.

ARE YOU LOOKING FOR THE BEST USB FLASHER ON THE MARKET?
YOU DON'T NEED TO PAY FOR THE BEST NOKIA FLASHER, BECAUSE THIS IS THE ORIGINAL AND IT'S FREE!!!!

What the software can do?
- User Friendly GUI
- DEAD USB Recovery
- ADVANCED Self-Test
- Backup User Data
- ORIGINAL NOKIA USB FLASHER (328 models covered)
- Supports MULTI-FLASH (2/3/4/8 phones flashed in the same time)
- Download the correct firmware from the Nokia Care Servers (Fast and Secure)
- Refurbish/Software Upgrade (without loosing data)/Soft Reset
- Work under Win XP/Vista/Seven x86
- May Support protocols F/M-Bus by using FPS-10/FPS-21 Interfaces

Download: http://www.fileserve.com/file/AE8ZXgw

Nokia Bicycle Charger Kit

2011-08-15T17:20:00.000+05:00

Nokia Bicycle Charger Kit

Charge your phone with free and eco-friendly energy when you cycle.

Use your own pedal power to charge your phone for free, efficiently and reliably, when you cycle. This durable charging kit is a convenient way to make sure you can stay in touch.

Dimensions:
Dynamo: 40.5 x 94.5 mm
Charger: 70 x 34 x 21 mm
Phone holder
Connecting cables: 500 mm + 375 mm (from charger to dynamo), 350 mm (from charger to phone)

Connectors:
2 mm charging interface

Power generation:
Compatible with bottle type bicycle dynamos with 6 V/3 W and 12 V/3 W output
5.0 V/450 mA/15 km/h.
Maximum current 70 mA
Charging starts at ~6 km/h and maximum output is achieved at 25 km/h.
Charging stops when the speed reaches 50 km/h.
Charging time depends on cycling speed, for example a Nokia 1202 with a 860 mAh battery can be charged with about 20 minutes of cycling at a speed of about 10 km/h (for the Nokia 1202 this would mean approximately 57 mins talk time or 74 h standby time)

Sales Package contents:
Bottle Dynamo for Bicycles
Nokia Bicycle Charger DC-14
Nokia Phone Holder for Bicycles CR-124
4 black re-usable cable ties
Plastic bag (to protect the phone against dust and humidity)

Nokia Firmware Downloader by Qureshi Mobiles

2011-07-27T09:42:00.002+05:00

Nokia Firmware Downloader

Download

Understand the SIM Card working system on All Cell Phones

2011-07-22T10:49:00.002+05:00

Sample Nokia because its all systems on the basis of his work similar

At pin Simcard must consist of 6 Pin .. consisting of:

simclock
simdata
simreset
VSIM
Ground
Nc (Not Connetcetd)

all phones must be composed of six pins is just ....

Consider the following schematic:

If we look at it ... workflow from the sim card is ....
From the sim connector ===> ====> Simcard Emif Power Ic
This applies to all phones ....

In detail we take the example image below:

This point should we really understand .... because the work will be very decisive steps which we will do ....

PIN2 is important that we have noticed is all the PIN2 must be in a state connected to each other according to the path ... except for NC path alias not connected or not connect to mana2

STEP 2 simcard in determining damages is ....

1. Simcard replace first ... lest we not read sim card mobile phone sim card because it is damaged ... oon's really tuh hehehheheh
2. If the sim is ok ... measuring inhibition of 5 pins in it ... VSIM particular point, the data sim, sim sim clock and reset ....

PIN2 is to determine where on the connector ... the steps we need to do is to determine which point PIN2 Ground on the sim card connector ....

You have to understand ... that the ground would be in one corner of the sixth PIN2 .. as shown below:

If you notice ... then the ground of the sim card connectors are located on the bottom right corner ...

to determine the next titik2 ....

that is certain!!
ground position to deal with VSIM
On the ground must have NC
His next composition of the next sequence certainly like the picture above ....

Well,.,, After we know titik2 of PIN2 in accordance with its name ... then the next step is ... by measuring the resistance in the pin data, clock, reset and VSIM ....

if there are no obstacles in the climb, ... hence can be sure that your cell phone damage is a line break between emif simcard with connectors or damage to the emif simcard ....

steps you should do is ... by lifting emif sim card ... then measure the correlation between the broken lines in accordance track down emif sim ...

if the line is not severed was good aka .. hence can be sure that ... emif simcard must BROKEN! solution is to replace or men jumper emif emif simcard simcard in accordance with the track ... for example at the above phone .. jumper the trick is as follows:

The next ......
if it turns out after doing resistance measurements in the ... all the normal barriers .. (If necessary, compare with the value at normal cell phone)
then ... steps should be done is by measuring the voltage on the connector .... VSIM measuring at the measuring point in accordance with the determination of this VSIM pin ...

VSIM measurements should be made on the phone the first time in the light ... Why? because when the phone is the first time live ... then he will check the existence of sim and will appear voltage of 1.8 v. .. if the mobile phone sim card does not detect the presence of the tension that had been at 1.8v will fall directly on the point of ZERO ... but if the phone can detect the card then the voltage will be increased to 3 volts ...

so do not be surprised .. if the phone had been living so many seconds ... you will not be able to measure the presence of voltage at 1.8v the sim card ... this is what often happens and becomes kekeliaruan .. and always raises the question ... "Kok kok VSIM voltage measurement his breast I not ever stress ya ????"

hehhehehhhe

more ... if after doing measurements proved that the voltage stress is apparently no voltage NOL aka ... then it should do that best is to replace the Power Ic .. because the stress is coming from the UEM ... but .. replace the IC power because it has a big risk .... and also requires a high cost due to power ic pretty good price ... then ... the stress is enough to outsmart us by fetching from another voltage ...

Whether the voltage from which we'd better get me??

you do not take away from the stress of other 1.8v .. example taken from Fio ... because the possibility of success will be very small ....

Why?

because when simcar unreadable ... there must be a voltage of 3 volts instead 1.8v ....
8.1 The stress voltage is the basis for detecting the presence of sim ...

The most appropriate is ... by making jumpers from 3-volt voltage for others ....

nah on the phone because we very rarely voltage 3 volts .. then we usually menjumper of voltage at 2.8v .. example of the Vaux voltage of 2.8v .....
this forum actually do have a jumper from Vbat .... and successful ...
it is okay to do .. and will be successful .. but because there is excess voltage that should only 3 volts (VSIM) to Vbat (3.7V) .. hence the risk it faces is the possibility of rapid destruction of our CIP sim card ....

The next step ....

if we measure it on the path constraints VSIM not normal .. aka height .. then we have to do is to disconnect the capacitor on the path that led to ground .. because damage to the capacitor on the line can be caused sim unreadable ...

Here are disposed capasitor2:

Note the capacitor which given a yellow color ....

capasitor2 unplug serve targeted if the obstacle in the path simcard problem ....

Next ........

If we measure it all turned out normal barriers ... The next step is to lift emif sim ... then measure the resistance in between emif Power Ic simcard that led to the one in emif ... the goal is to find out .. whether between emif simcard and power ic .... there is a line break

if there is no increased resistance value .. hence can be sure that there is line break between emif and power ic .. then the solution is to jumper between emif simcard into power ic in accordance with the broken lines ...

If after performing the measurement .. apparently all the normal barriers .. then jumper simcard emif first ... if after to jumper emif simcar normal direct phone .. hence can be sure the damage to emif ....

but if it turns out after to jumper emif ... no sim card also read ... hence can be sure damage to the power ic ....

MXKEY / MXBOX v3.5 revision 1.2 - MAJOR UPDATE - The only BOX with TMA included

2011-06-25T17:35:00.000+05:00

v3.5 revision 1.2, Public-Release
MAJOR UPDATE

What is new:

MAIN

- Added, Files synchronization feature
- Allows to check and update important files with server without installing full setup.
- Also useful to minimize problems because of users patch.
- Fixed, Access violation on XP for PC without HTI(WinUsb) installed
- Check For updates and Single module update removed(replaced with Synchronize Files)

NK(Nokia Service Tool)

- Added, optional SX5 serial used for SL3 NCK calc (*)
(*) required HTI firmware version 00.17 or later

- Added, Latest flash update definition to setup
- Added, Options to disable/enable RAPIDO new protocol for USB flashing
- Added, Options to disable/enable embedded SBL for XGOLD flashing

- Added, HTI SoftTMA Resistor selection (*)
(*) required HTI firmware version 00.17 or later

- Added, Local storage definition for DCC and RFBB data.
- Added, DCC data verify after write
- Improved, DCC data write (If DCC write fail, DATA will be written as PM)
- Fixed, Download in background deadlock bug
- Fixed, PM erase bug (was early stopped on newer BB5 phone)
- Fixed, DCT4 flashing
- Fixed, New ProductProfile write

QCD(CDMA Service Tool)

- updated patch definition to version 1.4
- added unlock definition for: Haier Q9+-INAV1.04-100326-JWD, method: patch unlock
- added unlock definition for: ZTE SM_C36X_RBTL05NV1.0.0B05, method: direct unlock (not tested!)
- fixed unlock definition for: ZTE TM_S189_RBTL35NV1.0.2B01, method: direct unlock
- fixed unlock definition for: ZTE TM_S168_RBTL35NV1.0.0B02, method: direct unlock
- see "modules\{9A05071F-D3A6-484B-8E3E-C6F47311C78C}\supported_phones.txt" for list supported models

BB (BlackBerry Tool)

- Added, Factory lock status on device scan
- Minor bug fixes

Download

Nokia Releases Official Flash File Downloader

2011-06-25T07:46:00.000+05:00

Now here's a very Handy and Official Tool for Downloading MCU, PPM, CNT and Even MASS MEMORY Flash Files on all NEW BB5 Phones !!!
It has MORE FILES THAN NAVIFIRM or NAVIFIRM+

Nokia Data Package Manager Lite is a service software tool which provides following functions:

---> Real Time downloading of product software files via online connection from Nokia Firmware Repository (FiRe)

---> Search function and creation of filters for the data you need to download.

---> Checking and organizing your locally installed product software content.

The purpose is to stop the delivery of separate Care Data Packages, and continue software content delivery
via online connection. Please note that you can also download software content from FiRe by using the "Data
Package Download" - function in Phoenix service software, or by using care Suite Product Support Tool in Online mode.

Download Link Here:

https://rapidshare.com/files/1691711...-2011_24_1.msi

Download NokiaDataPackageManagerLite-2011_24_1.msi from mirrorcreator.com

AvatorBox Version 5.400 Released

2011-06-25T07:43:00.000+05:00

Soldering and Desoldering Tools

2011-04-07T18:34:00.000+05:00

Soldering and Desoldering Tools

Soldering Iron
A soldering iron is a tool normally used for applying heat to two or more adjoining metal parts such that solder may melt and flow between those parts, binding them securely, conductively and hermetically.

A soldering iron is composed of a heated metal tip and an insulated handle. Heating is often achieved electrically, by passing an electrical current (supplied through an electrical cord or battery cables) through the resistive material of a heating element. Another heating method includes combustion of a suitable gas, which can either be delivered through a tank mounted on the iron (flameless), or through an external flame.

Some soldering irons heat up and cool down in a few seconds, while others may take several minutes.

Soldering LEAD
Soldering lead is used to bond or connect electronic components.
Solder is a fusible metal alloy with a melting point or melting range of 90 to 450 degree Celsius (190 to 840 °F), used in a process called soldering where it is melted to join metallic surfaces. It is especially useful in electronics . Alloys that melt between 180 and 190 °C (360 and 370 °F) are the most commonly used. By definition, using alloys with melting point above 450 °C (840 °F) is called brazing. Solder can contain lead and/or flux but in many applications solder is now lead free.

While it is possible to do some wiring without soldering connections, soldering is the preferred approach. Proper soldering is easy with the right tools and techniques. One item that is critical is the right solder. DO NOT use the environmentally friendly lead free solders, they don't work worth a damn. Even in carefully controlled industrial conditions, lead free solders produce inferior connections. As much as the politicians backed by environmentalists would like to, they can't legislate metallurgy.
Soldering Paste
Solder paste (or solder cream) is used for connecting the terminations of integrated chip packages with land patterns on the printed circuit board. The paste is applied to the lands by printing the solder using a stencil, while other methods like screening and dispensing are also used. A majority of defects in mount assemblies are caused due to the issues in printing process or due to defects in the solder paste. An electronics manufacturer needs to have a good idea about the printing process, specifically the paste characteristics, to avoid reworking costs on the assemblies.

Characteristics of the paste, like viscosity and flux levels, need to be monitored periodically by performing in-house tests.

Soldering flux
Soldering flux is just a safe, convenient acid for dissolving the oxide skin off the metal
you want your solder to wet well. Also dissolves oxide off the liquid solder, making it
less crusty and therefore more shiny.

"Acid" flux is the stronger class of flux; it has something like hydrochloric acid in
it. (The paste form has zinc chloride.)
This is good for making difficult oxides dissolve so difficult metals like stainless
steel can be solder-wetted.
But the acid can hang around later trying to corrode the metal it just cleaned for you.
So for electronic stuff we mostly do not use it.
If we do, we scrub it off with things like toothbrush, water, soap, alcohol, baking soda,
to minimize acid residues.

The flux built into most solder wire is called rosin flux.
I think it is an organic acid (so is vinegar, and tart-tasting "citric acid"),
stuck onto larger molecules that melt only at soldering temperatures.
That is the clear yellow-brownish plaque that sits on the solder's surface when you are
done.
It does the same stuff as acid flux, but it is milder two ways.
It is only strong enough to reduce weakly oxidizable metals like copper, tin, lead,
silver.
So it is just strong enough for electronics use, but not for soldering to stainless
steel or iron or anything with chrome or aluminum.
And rosin-flux goes back to its plastic-like solid form after use, so it does not act
very corrosive to the metals later on.
So we do not need to clean it away carefully.
It can be cleaned away if you want to work at it, with brush-scrubbing and the right
"polar solvents".
"Flux remover" is sold in spray-cans for this. Rubbing alcohol with a dash of dish-soap
sort of works for me.
Try it and see what it looks like.

Soldering Wick
A solder wick (also desoldering wick or desoldering braid) is a tool for removing solder from any solder joint. Usually, it is a roll of fine, braided 18 to 42 AWG wire, typically oxygen free copper, which has been treated with a rosin solder flux.

Close up to a piece of solder wick

Close up to the netting of a solder wick

To remove solder with it, one presses the wick onto the solder joint to be removed and then heats the wick portion that is on the connection with the tip of a soldering iron. As the rosin melts onto the wick and the connection and the solder reaches its melting point the solder rushes via capillary action onto the clean copper braid. Once everything has melted and the solder fuses with the braided copper, the wick is lifted along with the solder and is then cut off and disposed of.

C1 Hardware Solution by www.qureshimobiles.com

2011-03-07T16:32:00.001+05:00

Download

Gsmfinder Version 2.1.1 with free dct4+ rpl calc

2011-02-21T20:50:00.000+05:00

(21-2-11)
Gsmfinder V2.1.1

Just need register and get it free
more updates soon coming

Whats new in Gsmfinder V2.1.1

1.CABLE COMPATIBILITY ADDED FOR LOBSTER/ANYCOOL/MOTOROLA
2.BATTERY COMPATIBILITY ADDED FOR MOTOROLA
3.LCD COMPATIBILITY ADDED FOR NOKIA/MOTOROLA
4.RPL CALCULATION ADDED FOR DCT4+ BY SERVER (HOT)
5.SMALL BUG FIXED
6.REMOVE SECURITY CODE READ IN DCT4+ FOR NOW

What we have till now ?

ZTE :29 models supported - codecalculator
Huawei modem:39 models supported - codecalculator
Alcatel:24 models - codecalculator
IC compatibility: 13 types
Lcd compatibility : 810 types (NEW)
cables compatibility: 2038 types (NEW)
battery compatibility: 1189 types(NEW)
ASIC compatibility: 112 types
Nokia: Unlock- SL1/DCT4+
backup/write pm DCT4+/BB5
Reset security code BB5
Readinfo DCT4/DCT4+/BB5
RPLCalculation DCT4+ (NEW)

(19-2-11)

Whats was in previous update Gsmfinder V2.10

1.Distributer & resseller list updated
2.Security code read for DCT4+,SL1,SL2 & SL3
3.Added new 7 models Alcatel CODECALC C551, C522, C651, C652, C750 , MissSixty, S520

Need your support :

We are looking for more test results from all the users

supported interface : UFS ,JAF AND PROLIFIC CABLE

NOTE : Please use official link for dowload it will help in further versions
In further versions you should need key file that will sending for
official web registered users

Download link: Dits GSM Finder

Free Nokia DCT4(+) RPL Calculator

2011-02-17T16:00:00.000+05:00

TDS Tool - Free Nokia DCT4(+) RPL Calculator v 1.0

This small utility allows of standalone calculation of
RPL files for the DCT4 and DCT4+ generation of Nokia
mobile phones. The files are compatible with all models
that have the combination of UPP + UEM chipset. Generated
files contain 2 sections: DATA1 and DATA2, those are needed
as follows:

DATA1 - data goes into HW PMM area of the phone(bottom 0x100 bytes
in the flash chip)

DATA2 - data goes to the OTP area of the UEM chip, used by HW logic
to lockdown security watchdog timers

Both areas are related, as DATA1 contains encrypted UEM WD unlock password

To calculate just enter UEM/ESN and press Calculate. File will be created
in the program directory. Then load to the phone with your favourite flasher.

This is a free release, with the hope will be usefull to the community.

Download Link

Basic and Useful Info About China Phone

2011-02-17T10:24:00.001+05:00

What is TX RX?

tx rx is type of connection which will help to you to connect your phone with pc for software operation. its just a type of connection name.

what is cpu?
Central processing unit. A parts of phone. its type a head of phone. all phone have cpu but for china phone cpu is important for repair this phone. china phone have various type of cpu.

why cpu is important for china phone?
All other phone have cpu, uem, upp but for china phone cpu is important for repairing because various china phone cpu support various tool/device when you do software operation in phone.

How to know cpu type/model?
now many of device auto detect cpu type so no problem to know which cpu use in this phone which you want to repair. also you can open the phone and can see what cpu use in phone/what name write on cpu.

MTK

Infineon

Sky/Skyworks

ADI/AD

Philips

Agree

TI / Power Management

VIA

SAMSUNG

SI4904

ANYKA

Spreadtrum

what is flash chip and RAM?
flash chip store phone software in it. and RAM is extra built in memory which give space to phone and flash chip to extract phone software and operating in his memory when phone is open/running. some china phone flash chip and RAM include in one chip and some in cpu. so if your flash area or ram area is damage in flash chip, you must need to change total chip (CPU, Flash IC,) using many type of companies chip with under various model name, as like Samsung, Toshiba, Intel, ST etc

Flash chip name/model is important for china phone as like cpu?
Not like cpu but its important because when flash china phone if we not know what flash chip use on it, we can find perfect phone flash file.

what problem with china phone model name?
model name is not a big matter for china phone. because with same name have many many phone with deference pcb, pcb design, cpu, flash chip, gate up, software etc.

What need to know about a china phone when we repair?
1. CPU Type
2. Flash Chip model
3. Original software/flash file version.
4. Phone TX RX.

Flash file version is important for china phone?
Must. its very very important for china phone because though you lost your original (when manufacture company published phone) flash version or not know which file have in it first time, you got problem when you flash your phone. for flashing with wrong version/model flash file you got this type of problem-
1. Flash done but phone dead
2. white screen (no incoming/out going call)
3. white screen (with incomeing/outgoing call)
4. Keypad not work
5. Sim not valid
6. Sim blocked
7. Phone hang after power on
8. no network
9. have network but show emergency (this problem also do for power ic or bad connect sim or sim connector problem)
10. phone restart continuously.
etc.

Which tool or device?
many of free tool published in market for mtk, infineon, ad, spreadtrum, sky etc. but alwayes device give you a complete solution.