Rejeev

i9000 [Instructions] 3-button fix problem (download mode)

2010-10-04T11:58:00.000-07:00

complete guide to fixed in German.

[Instructions] 3-button fix problem (download mode)

IT IS NOW ALL MODELS WITH THE TYPE flashed, EVEN T-Mobile branded.

The name of your needs non-read all 20 pages here but you can begin to flash the same as it is here in the instructions .
Please read the instructions again carefully before you start to flash and keep you tuned precisely. In order to avoid mistakes and gebrickte Phones .

Do you have a device which is non-surges, and was delivered with JM1 you can immediately fix the flash without the downgrade to JM5.

What you need:
Galaxy S
Data Cable
Installed driver (eg by gravel)

Android SDK
Odin 1.3
I9000OXAJM1 CSC
File Pit 512
Firmware I9000XWJM5 (pw:samsung-firmwares.com)
3Tasten Fix von Richthofen

So we get started:

-Please uninstall previous Lagfix if any.
SIM card and memory card removed.
-GRAVEL close completely, even the tray on the taskbar

Setting Odin

1. Phone is not connected to the PC.
2. Odin start
3. In Pit Pit select the appropriate file 512.
4. Select Firmware Image CODE_I9000XWJM5.tar.md5 at PDA.
5. Under Select the Phone modem file MODEM_I9000XXJM3.tar.md5
6. CSC CSC_I9000OXAJM1.tar.md5 Under Select the file which you have charged extra.(not the folder of JM5 available End SERJM1 CSC, otherwise you have as I after flashing nice Cyrillic alphabet on your SGS )
7. Please leave all settings (hook) in Odin as they are after opening.

The whole should then look like this then:Click Me

Have you so far everything is selected and you can now control the device, setting the application-development to turn on debug mode and then connect the phone to your PC.

Start the download mode:

1. Start-Run-CMD and confirm with Enter.
2. The Dos window opens
3. Moves you in the Android SDK / Tools folder
4. Give a reboot adb download
5. The cell phone will restart and is now in download mode.

If you are not soo good knowledge of ADB have is here once again the whole thing a little more detail is: Click Me

Flash process:

After you've now set the download mode, and since you can now Odin in Odin press Start.
Let everything go through complete appears to Odin in the green box PASS.

Fixed the 3 key combo:

If all goes well your device should now be restarted again and * # 1234 # will find it with the following data:
PDA: I9000XWJM5
Phone: I9000XXJM3
CSC: I9000OXAJM1

1. Removes the cell phone from your PC and start the device once.
2. If your sure the battery has at least 60% charge.
3. Includes everything from GRAVEL still is the tray icon in the taskbar.
4. Starts Odin 1.3
5. Now connects your cell phone again in debug mode with the PC
6. Go back by CMD in the command prompt.
7. And it brings back via "adb reboot download" in the download mode
8. Now deals with the PDA file GT-I9000_SBL_RCVDL_FIX_FINAL.tar.md one.
9. Hooked Phone Bootloader Update and removes the check in the re-partition, if available.

The whole should look like this: Click Me

10. Now press the Start button and waits to PASS the whole process is completed.

Now, if everything went fine after a restart your should now download and recovery mode work again.

You can now follow a normal flash any firmware by Odin, without fear that you have to undo the whole thing again.Because she, of course the normal flash not playing around in the boot loader.

I have followed me flashed with the latest JM8 ODIN + Root + Lagfix and my SGS runs perfectly .

Most importantly, I still take over any guarantee for any damage. I and several have at XDA made it exactly like that and it works .

Richthofen and special thanks again to everyone from the XDA forum, and all who have helped me to overcome my fear here to flash.

If there are errors in it I notice it says will improve .

About a thanks and a small report obs successful, I would be happy

Sources:

JM1 flashing via GRAVEL per REGHACK

XDA 3 Button Combo Fix

Thread Blocked download mode

How To Flash Galaxy S

How to restore from SHSH Saurik server to perform a local restore

2010-09-28T23:51:00.000-07:00

How to restore locally using signatures SHSH TinyUmbrella saved. Here's a guide to recover from these signatures Saurik server, just in case you have not saved locally and Cydia informs you that your device has SHSH the file for your specific version of firmware.

As said, the guide is only useful to those who have saved their SHSH on the server and the homepage of Cydia Saurik see a green script similar to screenshot below. For example, based on the screenshot, for devices that can "collect" from Cydia SHSH files for firmware 4.0.1 and 4.0.2.

Requirements

* File SHSH saved on Cydia for firmware version that you want to restore (to check you just check the homepage of Cydia as described above);
* TinyUmbrella, you can find the latest on the official blog for all Operating Systems.

Guide

1. TinyUmbrella After downloading, open the application and connect the device via USB cable.

2. From the main screen, check the option "Advanced Options".

3. You will see that the new fields appear, one of them consisting of a drop down menu from which to choose your device and firmware version. From this menu choose exactly the model of your device (including iPhone3GS, 4 or 3G, iPod touch 2nd or 3rd generation or iPad) and the firmware version you want to retrieve the file from Cydia SHSH to store locally.

4. In the bottom field instead, called "Request From", make sure you select "Cydia" and not "Apple."

5. After double-checking that everything is set correctly, click on "Save My SHSH" and wait. At the end of proceedings, please make sure you have "captured" file SHSH from Cydia, clicking on the "Display SHSHs.

Now you have all it takes to be able to recover locally, as described in this guide.

How to backup your ECID SHSH file

2010-09-28T23:47:00.000-07:00

How to backup your ECID SHSH file

For everyone who is wondering, Crapple has STOPPED SIGNING 3.1.2 FW so at this point you will no longer be able to get your ECID SHSH for 3.1.2 FW. You will only be able to get your 3.1.3 ECID SHSH file.

-----------------------------------------------------------------------------------------------------------------------------------------------------

This guide will explain how to backup your ECID SHSH file for your iPhone 3GS.

Q: What the hell is an SHSH file and why do I need it?
A: When the iPhone 3GS was released Apple introduced a new Firmware restore process. Basically now when you restore your 3GS iTunes will contact Apple's restore server to verify if the firmware you are trying to restore is allowed to be restored to your device. The server then sends a message back either approving or denying the request. If the server APPROVES the request, it sends back a file (SHSH) to iTunes which will then allow you to continue the restore to your device.

However though if Apple is no longer approving requests for certain firmware then you will not be able to restore. Instead you will receive a message telling you that “The iPhone "iPhone" could not be restored. This device isn't eligible for the requested build.”

So by saving your SHSH file you will be able to continue to restore your device even if Apple is no longer approving that firmware. SHSH files are unique for EVERY DEVICE, so you can't just use someone else's file. Also anytime a new firmware comes out you will need to recreate another new SHSH file for that specific firmware. You will only be able to restore your device with firmware for which you have save the SHSH file for.

The only devices that use this method right now are the iPhone 3GS, iPod Touch 3G, and the iPod Touch 2G. So you only need to save this file if you have one of those three devices. This DOES NOT apply to the iPhone 2G, 3G or the iPod Touch 1G.

Now with that all being said, onto the how to guide.

-----------------------------------------------------------------------------------------------------------------------------------------------------

Things you will need

First thing you will need to do is put your device into DFU mode. If you don't know how to do that then Google is your friend.
After your device is in DFU mode then open up ECID Grabber and click on the "Get ECID" button. You will then get a pop-up window and your ECID will now be in the box like this.
Next you need to open up Umbrella.exe or Umbrealla64.exe depending on what OS your using.
Paste your ECID into the first box, select the device and firmware that you want to save your SHSH file for and then select Apple for SHSH Repository.
Click Submit and in a moment you should get a message in the bottom right corner just as shown in the picture below.
This file will be saved in the same folder where you loaded Umbrella.exe or Umbrella64.exe

If you would like more info on how you can use this file to RESTORE your device you can refer to this thread.
How to Create Your Own Local iTunes Restore Server!

During STEP 4 you can also choose Cydia from the dropdown list. This will first check to see if Cydia has an SHSH on file for you and if it does then it will save the file to your computer. This will allow you to use this ECID.SHSH file to create a Local Restore Server as described in this thread.
How to Create Your Own Local iTunes Restore Server!

iphone 3gs jailbreak chart................

2010-09-27T15:18:00.000-07:00

Device : iPhone 3GS (which boot loader do i have ?)
Firmware	Baseband	Boot Loader	Jailbreak Options	Software	Unlock	Software	Firmware	Tested with iTunes
4.1	05.14.02	Any	Downgrade 4.1 orSn0wbreeze	sn0wbreeze	No	TBA	Download	9.2
4.0.2	05.13.04	Any	Downgrade 4.0.2	No	No	TBA	Download	9.2
4.0.1	05.13.04	359.3.2	Yes	Jailbreakme	Yes	Ultrasn0w	Download	9.2
4.0.1	05.13.04	359.3	Yes	Jailbreakme	Yes	Ultrasn0w	Download	9.2
4.0	05.13.04	359.3.2	Yes	Jailbreakme	Yes	Ultrasn0w	Download	9.2
4.0	05.13.04	359.3	Yes	Jailbreakme	Yes	Ultrasn0w	Download	9.2
3.1.3	05.12.01	359.3.2	Yes	Spirit, JailbreakMe	Yes	Ultrasn0w	Download	9.1
3.1.3	05.12.01	359.3	Yes	Spirit, JailbreakMe	Yes	Ultrasn0w	Download	9.0.3
3.1.2	05.11.07	359.3.2	Yes	Spirit, JailbreakMe	Yes	Blacksn0w	Download	9.0.3
3.1.2	05.11.07	359.3	Yes	Blackra1n, Redsn0w, Pwnage Tool	Yes	Blacksn0w	Download	9.0.3
3.1	05.11.07	359.3.2	Yes	Blackra1n	Yes	Blacksn0w	Download	9.0.3
3.1	05.11.07	359.3	Yes	Blackra1n, Redsn0w, Pwnage Tool	Yes	Blacksn0w	Download	9.0.3
3.0	04.26.08	359.3	Yes	Purplera1n, Redsn0w, Blackra1n, Pwnage Tool	Yes	ultrasn0w	Download	8.2

Fix: “Different SIM Detected”

2010-09-27T13:21:00.000-07:00

Fix: “Different SIM Detected”

Last week we told you about a method to fix the “Different SIM detected” error on an iPhone activated with a phonebook card. This method required a bit of file handling and could have scared away the least technically oriented of you.

Fortunately, there is now an easier way to do that.

How to Fix the “Different SIM detected” on the iPhone

Step 1: Insert the phonebook SIM in your iPhone to get out of emergency mode.

Step 2: Go to Cydia and add the following source: http://cydia.pushfix.info.

Step 3: In the PushFix repo, look for Hacktivation Patch and install it.

Step 4: Reboot your iPhone.

Done! You should now be able to swap SIM cards without any problem.

2010-08-08T12:37:00.000-07:00

How to: Solve "Diffrent SIM Detected" after Jailbreak!
if your iPhone stuck on Emergency Mode after jailbreaking and unlocking, I have a way to solve this,

Download and Install iFunbox software :
http://www.pars-gsm.com/Downloads/ifunbox_en.zip

Run the Software and Sync with iPhone

Now go to /private/var/root/Library/ and delete orginal lockdown folder and put attached lockdown folder
here
At last reboot your iPhone

iphone4 and 3gs v4.0 4.0.1 unlock done here steps

2010-08-02T02:50:00.000-07:00

1. What is JailbreakMe 2.0?

This is the latest cross-device/firmware untethered jailbreak by comex. It was released on Sunday, August 1 (like the previous jailbreak, carrying over the "Sunday is Funday" slogan many veteran jailbreakers and unlockers are familiar with.

2. How Does this Jailbreak Work?

All you have to do is visit http://jailbreakme.com on your iPhone, iPod touch or iPad, 'Slide to Jailbreak' and wait for the rest of the process to take place on your device.

If that link is not loading, please use *****i's alternative link to jailbreak your device
3. My Device Just Hangs at a Purple Screen. What do I do?

This will usually mean there was a problem connection to the server and whatever you're attempting to do isn't working properly. After sliding, a windows should appear and you should notice a process similar to the one in the images below. If your jailbreak does not appear similar to mine, then something had gone wrong. Reboot and attempt the jailbreak again.

Please note that this process may take a few minutes, so be patient. It should look a little something like this:

then open cydia and install ultrasn0w to unlock ur device thnks...........

2010-08-02T01:55:00.000-07:00

3G IS0 4.0.1 JAILBREAK & UNLOCK PROCESS STEP BY STEP(WITHOUT WIFI)

I AM SHARING A LITTLE THING THAT I HAVE SUCCESSFULLY DONE JAILBREAK & UNLOCK OF 3G ISO 4.0.1

HERE IS THE UNLOCKED PHONE SCREEN SHORT
---------------------------------------------------------------

WORKING PROCIDURE STEP BY STEP

1.AT 1ST RESTORE THE 3G PHONE LATEST WITH ISO 4.0.1

2.AFTER SUCCESSFUL RESTORE WITH ISO 4.0.1 JAILBREAK THE PHONE WITH redsn0w_win_0.9.5b5-4

3.BUT YOU HAVE TO CHOOSE & USE ISO 4.0 INSTEAD OF ISO 4.0.1 WHEN PRESS BROWSE FOR RESTORE FILE THIS IS THE IMPORTANT PORTION OF JAILBRAKING ISO 4.0.1

4.AFTER THAT EASY WAY FOLLOW THE PROCESS ON redsn0w_win_0.9.5b5-4

5.AFTER JAILBREAK YOU WILL GET A PHONE WITH INSTALLED CYDIA INSIDE ON ISO 4.0.1

6.POWER ON YOUR PHONE & CONNECT TO PC

7.INSTALL CYDIA PAKAGE repo666.ultrasn0w.com_Packages WITH CYDER WITH PAKAGE ON CYDIA AUTO INSTALL FOLDER.AFTER INSTALLING RESTART YOUR PHONE

Click this bar to view the full image.

8.CONNECT POWER ON PHONE AND CLICK ON 4.01 UNLOCKER

FINISH

PLZ RESTART YOUR PHONE,INSERT A SIM

NOW ENJOY AN UNLOCKED 3G PHONE WITH ISO 4.0.1

NECESSARY FILE FOR JAILBREAKING & UNLOCKING DOWNLOAD FROM HERE
-----------------------------------------------------------------------

ISO 4.0.1

ISO 4.0

redsn0w_win_0.9.5b5-4

CYDER WITH PAKAGE

4.01 UNLOCKER

iPhone | How to Jailbreak Your iPhone Using JailbreakMe [4.0.0, 4.0.1]

2010-08-02T01:41:00.000-07:00

These are instructions on how to jailbreak any iPhone (including the iPhone 4) on iOS 4 using JailbreakMe by Comex. Before beginning make sure your device is activation on iOS 4.0.0 or 4.0.1.

Step One
Press to launch Safari from your Springboard.

Step Two
Press to select the address bar and input http://jailbreakme.com then press the Done button.

Step Three
To begin the jailbreak simply move the slider to right.

Step Four
You will be displayed a status bar as the download progresses.

Step Five
Once the download is complete the jailbreak process will begin

Step Six
Once you are notified that the jailbreak process is complete press the OK button.

Press the Home button to reveal Cydia on your desktop!

Congratulations you are done! You may now continue by installing UltraSn0w to unlock you device. iPhone 4 users still need to wait a bit for an UltraSn0w update which will arrive shortly.

A big thanks goes to Comex and the iPhone Dev-Team for their efforts and successes.

FREE SONY ERICSSON NEW FLASHER & UNLOCKER,etc (Omnius for SE )

2010-08-01T03:25:00.000-07:00

Omnius offers these operations:

* Full and permanent unlock
Allows you to perform the permanent change of the network lock status of your phone. After further flashing or customization it will remain unchanged.
* Unlock-by-patch
Unlocks your phone until next flashing.
* Flashing & phone language change
Updates the firmware, debrands the phone, changes the phone's language, etc..
* VKP Patching
Allows you to patch your firmware using VKP scripts.
* CDA Changing
Allows you to change language information to any possible and then upgrade your firmware to the latest released by vendor (using SEUS).
* GDFS reconstruction (repair)
Performs a full and correct rebuild of GDFS (global data file system).
* GDFS/TA backup and restore
Downloads GDFS/TA from your phone, stores it and restores on request.
* User-code reset
Resets the phone user code.
* Error detection & repair
Diagnose your phone's problems and offers a solution if there is any.
* Detailed phone identification
Simply displays all the details about your phone.

Features:

o Customizable window layout
o Nice design
o Suitable for either beginners or experts
o Translated into many languages
o Product homepage access from the application
* Allows multiple connected phones / multiple simultaneous operations
* No card, dongle or box needed
Download:Link

LG GS101 RJ45 PINOUT

2010-07-31T02:38:00.000-07:00

LG GS101 RJ45 PINOUT