Remote Control Model Review Blog

Is 1/10 Hobbywing Xerun approved by ROAR

2012-04-16T21:30:00.003-07:00

hi i want to use the 1/10 hobbywing xerun combo for onroad rc racing but is it approved by ifmar and/or roar?

I want to get another motor for bashing, how many turn should i use if i want my car to go 50mph+ on 2s without overheating the esc and killing my lipos? thanks
http://www.hobbyhot.com/HOBBYWING/

The Official Fly Sky FS-GT3B thread

2012-04-10T20:45:00.002-07:00

It seems that there is a large number of FLYSKY gt3b threads spawning here and I thought it might be a good idea to focus that knowledge into one thread... Since i at the moment simply cannot be bothered to hotlink the lot of them into this opening post i am going to let that be up to someone else.

Since i do have the gt3b thread on RCTech open in another tab at the moment i figured i would link that into this thread...
http://www.rctech.net/forum/radio-el...ansmitter.html

Well so to start it all off... Over on RCT we're experimenting with different modifications, all pretty well detailed in that thread, and i have just ordered myself the hardware required to start tinkering with the source code, now i could do a full write up "how to" style if there's a market for it... I'll need some time to figure all the stuff out though...

Well lets see if this idea takes root, might be usefull to some people to have a more centralized thread. Reason i didnt turn it into a general flysky thread is that i see the gt2 as a different enough platform to merit it's own thread and it seems to that Jang's original thread is performing that role quite nicely... (also i just dont have one:P)

Where to buy GT3B
HobbyHot - http://www.hobbyhot.com/Fly-Sky-FS-GT3B-3ch-2.4GHz-LCD-Transmitter-Receiver.html

fast ship and friendly service.

HobbyKing
no idea but quite a lot complaints from rcgroups

Links!

HOW TO: Reprogram the GT3B Radio

PSX Firmware Generator

Custom Firmware
Version 0.1.0

Version 0.2.0

New Firmware Help-
http://www.rctech.net/forum/9235682-post1692.html

http://www.rctech.net/forum/9236088-post1695.html

http://www.rctech.net/forum/9267271-post1774.html
Service Menu

Insight of the GT3B

Reptile's GT3B Bearing Mod

Useful links!

PSX
http://www.rctech.net/forum/8827368-post847.html
http://www.rctech.net/forum/8792929-post823.html

FireFrenzy's Tutorial on Reprogramming the GT3B
http://www.rctech.net/forum/8953371-post1029.html

STM8S Mod from 305

losikid67 Reprogramming Kit

losikid67 3pos Switch Adaptor

People Offering Reprogramming Services
Australia
NSW
QuangVuong - $5 per radio. An extra $5 for a bearing mod. Plus postage both ways.

America
Arkansas
Smoedog -$5 per radio + shipping

Jefferson City, Missouri
bugman72 - $10 + shipping for the reflashing service, $5 + shipping for the bearing mod

Chicago, Illinois
beemerfan - $10 + all shipping costs for reflashing
Indiana
Fixitrod - $10 plus postage both ways

Portland Oregon (Pacific Northwest)
Robs Pics - $10 plus return shipping

Where To Buy the STM8S?
element 14-$15.71

Digi-Key-$9.60

Mouser-$9.60

UK Farnell-7.23 Pounds

Micro 4 You Studio-$16

Future Electronics-$8.55

Please PM me if you know any stores, which sell the STM8S board. Please send me a link of the item.

Please PM me with your area and price you are offering to reprogram the GT3B. I will be adding to this list.

If Ive missed your tutorial, or something useful, please PM me and Ill add you here. Sorry if I did miss you.

PAINTING & DECORATION OF R/C CAR BODIES

2012-04-09T20:05:00.003-07:00

PAINTING & DECORATION OF R/C CAR BODIES
A large part of RC car enjoyment is in their construction and running; however, final finishing and decoration can also provide great pleasure. Decorating and finishing is not only self satisfying, but an essential part of the hobby. A beautifully finished car even seems to go faster, and if it has been modified or customized, it will stand apart from the others.
1. PAINTING BODIES
Painting the body shell is the most important single step in finishing the car model.
Two types of bodies are used on R/C vehicles. Injection molded styrene plastic resin or vacuum formed transparent polycarbonate (Lexan) body shells. The usable paints and working procedures are very different between these two types of bodies.
SOME PRACT|CAL ADVICE ON PAINTING
Plastic paints use organic solvents, and can be harmful if improperly handled. Observe and follow the manufacturers rules for safe use and a good finish on the model.
Ventilate while painting
Allow adequate ventilation in the painting area while working.
Avoid open flames
Some paints and thinners are inflammable. Never use them near open flame.
Paint on a clear day with low humidity
High humidity can cause a cloudy finish (blushing) on the painted surface. if possible, paint on a clear day to avoid this problem.

Spray paint outdoors in a windless area
A spray can delivers a fine mist of paint that coats wide areas evenly. Spray paint outdoors in a shady, windless area. Use a cardboard box, newspapers, etc. to keep paint off the surrounding areas.
PAINTS AND RELATED ITEMS REQUIRED
Paints for injection molded bodiesStandard plastic model paints, like enamels, acrylics, and lacquers, can be used in painting injection molded car bodies.

Paints for polycarbonate bodies
Specially formulated polycarbonate‘ paints are required for painting these transparent body shells. Conventional plastic paints easily peel or chip off, even with the slightest shock to the car body.
Some kits include separately molded plastic parts such as the driver’s helmet, spoiler, door mirrors, etc., which are added to the polycarbonate body. These plastic parts must be painted with regular plastic paints and not polycarbonate paint.
Brushes and other implements
Paint brushes come in several shapes and sizes, such as flat or pointed brushes. In addition, you will need the following when painting: Paint thinner compatible with your paint, empty paint jars or trays, masking tape, scissors, a modeling knife, clips or clothespins, rags and newspapers, etc.
PAINTING INJECTED MOLDED BODIES
The highly detailed and lifelike bodies are injection molded from styrene plastic resin. They are heavier and are more easily damaged in collisions at the track. Standard plastic paints are used in painting these bodies.

Preparation
1. A subassembly to be painted in one color should be assembled prior to painting. Remove excess cement, fill in and clean up joints and seam lines. Smooth the entire surface using a modeling knife and fine abrasive papers.
2. Remove all dust and oil from the parts. Wash them in a mild detergent, and rinse well, allowing to air dry. Objects to be painted should be secured to a base so that you have access to all areas to be painted. For example, make a loop of tape, with the adhesive on the outside, then secure the body to an empty box or can. Small parts should be painted while still on the plastic tree, or by holding with a clip.

Painting procedures
First paint the body overall. Add small details after the first coat has completely cured. Spray paint the large areas and brush paint the details.

Tips on spray painting
Shake the spray can well prior to Use. Test spray to see if it is properly mixed.
Spray in one direction only, from a distance about 30cm from the model.
Always use a light coat over the entire surface, and allow to dry. Repeat this procedure or three times for a perfect finish.
When the distance between the can and model is too close, or too thick of a coat is applied, the paint will run or contain small air bubbles. In these cases, let the paint dry for two or three days, then sand off using abrasive paper. Clean and smooth the surface and respray.

Tips on brush painting
Thoroughly stir bottle paints using a metal or grass rod prior to application. Do not shake the bottle, as this causes bubbles.
Select a suitable brush size according the area to be painted. Use flat brushes for areas and pointed brushes for details.
Move the brush in one direction only. When the coat has fully dried, another coat applied in a different direction can be for an even finish. paint is too thick, add the exclusive for a smoother application.

Masking
When more than one color is to be applied, the use of masking tape is necessary. Use only a high grade, thin paper tape. Remember the golden rule when painting outside surfaces. Paint light colors first, followed by the darker colors.

For curved and irregular borders
If the edge between the two colors is curved or irregular, cover the area with tape and draw the edge line on the tape sharpened pencil. Using a sharp modeling knife, cut away the tape from where the edges are to meet. Be careful not to out the body.

Some tips on masking
When masking tape is not properly applied, paint will run under the tape and mar the surface. Press the masking tape down firmly with a finger nail for good tape adhesion. Special attention must be paid to recessed body panel lines, projections and undulating surfaces, plus edges and corners of a body, if these areas are masked.

Cautions when overcoating Experienced modelers and professionals of- ten use different types of paints to obtain better results. When doing this however, you must accept the fact that you cannot use lacquer paints over acrylics or enamels. The solvents in lacquer will melt and damage coat ing of other paints.
PAINTING POLYCERBONATE (LEXAN) BODIES

Mask off the window areas
Windows of car bodies should remain transparent, so masking is required. Mask from the inside using paper tape. Some kits include masking seals for the car’s windows when painting.

Paint the details first
As paints are applied from the inside, but viewed from the outside, the first coat will be the outermost color on the finished model.
You must be careful when considering the order of painting colors. Color application should start with the details, just the opposite from painting styrene bodies.
Paint darker colors first
When more than one color is to be used, apply the darker color first. The masking procedure is also done in reverse.

If a lighter color is applied first, followed by a darker color, the overcoated area of the first color will be darkened when viewed from the outside.

AlRBRUSH PAINTING
Airbrushing combines the advantages of both brush and spray cans. By utilizing its features, a variety of painting effects can be achieved.
Paints can be mixed to make custom shades
Airbrushing uses bottle paints, so blending and matching colors to your desires is easy.
Fine lines can be done
Airbrush painting is done by spraying misted paint onto the surface, just like spray cans. However, airbrushes can spray lines of about 1-3cm and even down to 1mm in some cases. By using this characteristics, professional effects, such as subtle gradations, camouflage painting, or using it just like a paint brush. is possible.
NECESSARY ITEMS
An airbrush system consists of the handpiece, compressor, and the connecting hose. Propellant cans can be used instead of a compressor, but their duration time is limited, and they must be disposed of when empty. ln the long term, a compressor will be more economical than cans.
Tamiya’s “Spray-Work” portable airbrush system uses a Ni-Cd 7.2V battery as its power source. It can also be operated from household current, using a compatible AC adapter.

2. MARKINGS
Decal and stickers are another important aspect in finishing car bodies. In addition to kitsupplied stickers, a wide selection of optional stickers is available on the market. One of a kind markings can also be made using selfadhesive sticker sheets.
TIPS FOR APPLYING STICKERS
Although the application seems easy, wrinkled or out-of-position stickers mar a model’s final finish. Completely removing the backing from the sticker prior to application will result in wrinkles or bubbles. Follow these procedures:

3. MORE DETAIL AND CUSTOMIZING
Add details and customize your can to build the one-of-a-kind model.
Your imagination is the limit. Add a visor to your drivers helmet using thin transparent sheet styrene. Cut out a photo of your favorite driver from a magazine and glue it in the helmet. Make openings in the front grille, air intakes, etc. and apply plastic mesh from the inside. You can operate your car’s headlights and tail lamps by using optional light bulbs and brake lamp units available on the market. However, make sure they have compatible voltage ratings with your battery.

R/C SAILING GUIDE

2012-04-09T20:04:00.000-07:00

R/C SAILING GUIDE

http://www.hobbyhot.com

Radio controlled yacht models can provide the same enjoyment in “conversing with the wind”, as their full sized counterparts can do. Using the natural energy of the wind, the model glides over the water, precisely controlled by its rudder and sails. Following are fundamental tips for operating in this elegant R/C sport.

1. RADIO CONTROL REQUIREMENTS
A 2-channel radio, with a stick controlled transmitter is required for yacht models. r Two servos control the sail and rudder.

A small yacht model can be controlled by standard sized servos, but a special high torque servo may be required to control the sails on a larger sized model. Consult your hobby dealer to select a suitable system.
2. WIND DIRECTION AND SAIL ZONE
The procedures for sailing are the same as experienced on full-sized yachts. A yacht is capable of maneuvering as shown in the illustrations. Bear in mind that a yacht cannot sail directly into the wind and there is an approximately 45 degree no-sail zone.

3. CONTROLLING A YACHT MODEL
The sailing performance of a yacht is largely influenced by the wind direction in relation to its sailing direction. The wind direction varies each moment. Control of the sail and rudder obtains smooth sailing, always keeping the direction of the prevailing wind in mind.
4. ADJUSTING MAST AND SAIL
The sailing characteristics of a yacht can be altered by adjusting mast angle and sail tensions.
WEATHER HELM AND LEE HELM
Three basic sailing tendencies are present when the rudder is straight (neutral). When the vessel tends to sail windwards (weather) with the rudder straight, the condition is called a WEATHER HELM. Opposite to this, when the vessel sails downwind (leeward), it is called a LEE HELM. A vessel that sails straight ahead is JUST HELM. Helm conditions can be adjusted by mast inclination. Inclining the mast forward (forestay) provides a lee helm, while inclining it aft (backstay), provides a weather helm.

ADJUSTING LEECH CURVE (SAIL TENSION)
Proper adjustment of your sails is essential in order to utilize wind power efficiently. During strong winds, the sails should be given extra tension, and less tension during mild winds. Adjust the mainsail by the boom vang, using the; adjuster. Extend boom vang rod for weak tension and shorten for more tension. Jib sail curve is adjusted by inclining or declining the sheet adjuster on the jib halyard.

*Moisture can cause troubles with systems and batteries. In particular, contact with salt water can cause almost immediate corroding of precision electronic circuits. Avoid contact with water as much as possible; however, in case the unit and/or batteries accidentally get wet, immediately remove from the model. Drain and wipe off any water. Allow it to air dry in the shade. If salt water gets inside the R/C unit, remove the case and rinse with fresh water. Test the dried unit prior to reinstalling in the model. Send to the dealer/manufacturer for repairs if any malfunction is observed.

SAILING SAFETY PRECAUTIONS
To avoid serious personal injury and/or property damage, operate all remotely controlled models in a responsible manner.
Never sail vessels near people (swimming, fishing, etc.) or animals, as it could cause a serious accident.

TO avoid damage to the vessel and prevent accidents, do not sail vessels in fast moving currents or restricted maneuvering areas.
Never sail vessels near full-sized boats as it could cause accidents.

Never sail vessels in harbors, ports or trafic routes used by full-sized ships/boats, as it could contribute to accidents.

Sailing in weak or no wind conditions could result in loss of control of the yacht model.

Avoid sailing in shallow waters, among water plants or in areas which could have underwater obstacles. The keel and rudder of the yacht model may become entangled or caught.

More information: visit www.hobbyhot.com

Hobbywing Skywalker esc

2012-03-28T19:36:00.003-07:00

Hobbywing Skywalker esc

Hey Guys,

These caught my attention price wise and amp wise. I want to replace my stock esc with a better one and the dimensions are perfect for my heli. I tought I would ask about these as a heli esc. I have ran hobbywing in my r/c cars before with good results and figured these can't be to bad.

My stock esc is a 8amp in my SR and wanted to replace it with a different one soon.

Here are the ones I was looking at

http://www.hobbyhot.com/SKYWALKER-20A-RC-Brushless-Speed-Controller-ESC.html

Thanks for any advice

SH Engine

2012-03-28T19:34:00.001-07:00

SH Engine is a Golden Lion Enterprises Company was established in 1989. They continue to set the industry standard for manufacturing the best Nitro Engines on the market worldwide. SH Engines are known for there incredibly reliable, high horse power nitro engines. Using industry leading CNC techniques has allowed SH Engines to stay out in front of the competition. All SH Engines products are thoroughly tested by there engineers and Team Drivers to help introduce the best engines, replacement parts and hop-ups to the public!

Products

Sort by: Product Price Default

SH ENGINES Model 18 Nitro Engine 2.74cc for RC Car Buggy Truck Truggy EG630	SH ENGINES Model 21 Nitro Engine 3.48cc for RC Car Buggy Truck Truggy EG635	SH ENGINES Model 28 Nitro Engine 4.57cc for RC Car Buggy Truck Truggy EG640

Quantity	Quantity	Quantity

2012-03-23T01:33:00.001-07:00

More Tamiya Product on HobbyHot.com
HOW TO BUILD A CIRCUIT
Building a racing course, even a simple one, lets you enjoy it far better than running a car in a large open space freely. You can make one very easily, i.e., by drawing lines with chalk or using empty bottles for pylons (when using a space of someone’s possession, like a parking lot; of course, permission should be acquired beforehand). To make race more fun, some knowledge of courses are required.
1. A TRACK BEFITTING THE CARS
You cannot expect thrills and excitement when running cars on a track that is too wide. Conversely, a too narrow track means you cannot enjoy the fastest racing. Considering car size and performance, suggested track dimensions are shown on the following diagram.

COURSE LENGTH
With electric powered cars top speeds at around 40km/h, this equates to a little more than 11 meters per second. Taking into account deceleration at corners, a car will lap a 100m circuit in about 15 seconds or less. The top speed of glow engined R/C cars can exceed 60km/h. The faster a car‘s top speed, the longer and wider the racing circuit should be.

COURSE WIDTH
Course width should be determined by the models size and the number of cars that will be raced at the same time.

*Areas distant from drivers should be made broader.
The farther away from drivers, the narrower the course will look, because of parallax. This can cause problems for drivers. To compensate for this, track sections in these areas should be 1 to 2m wider than other areas.
*Wider sections can be used for the pit area.
Make a very wide section near the drivers control stand to be used as the pit area for endurance racing and other events.

*Vertexes of curves should be made wider.
Cars are apt to deviate from the course outward on high speed curves, and inwards on low speed curves. The width of corners should be increased accordingly.More Tamiya Product on HobbyHot.com

STRAIGHTAWAYThere should be at least one straight stretch where cars can run at their maximum speed. If a car’s top speed is 40km/h, it will travel over 30 meters in less than 3 seconds. Drivers can relax and enjoy top speed driving on these straights. A longer straight may be desired depending upon the car’s speed potential. A straight of over 40m will allow drag racing, for cars designed with quick acceleration performance (a 400m full sized track is 40m in 1/10 scale).
2. TRACK CHARACTERISTICS ARE DETERMINED BY CURVES
Circuits are roughly classified in two groups; a high speed course where velocity is important, and a low speed course where control techniques are more important. The features of a track are formed with the number and characteristics of many curves. An ideal circuit conceivable is a mixture of high and low speed courses.

CURVES AND CORNERSCurves and corners can be divided into three groups in terms of their layout and a car’s possible passing speed. It is recommended to use at least one each of the high, medium and low speed curves, plus a complex one consisting of different radii, on the circuit.

More Tamiya Product on HobbyHot.com

COMBINATION OF STRAIGHTS AND CURVES
A circuit’s characteristics can be changed by how the straights and curves are combined. A short straight between curves of different radii makes a kind of complex course. A high speed corner, following a long straightaway, emphasizes the thrill of high speed performance. A hairpin corner after a straight requires hard braking and careful steering control.

3. FROM THE DRlVER’S POINT OF VIEW
Apart from its size, the biggest difference between real cars and cars is the position of the driver. The following points should be fully considered.

SECTIONS FAR FROM DRIVERS SHOULD BE MADE SIMPLE
On a circuit, track sections distant from drivers look narrower. Therefore, these sections should be made simpler and wider. Put the demanding, complex corners and high speed curves as near as possible to the drivers’ control stand.

DO NOT OBSTRUCT THE DRlVER’S VIEW
Bridges and gates are often seen on real race tracks, and putting them on circuits creates a proper racing atmosphere; however, these decorations can often hinder the driver’s view. Avoid positioning them on or near corners, and always check their position by viewing from the control stand.

INCORPORATE A - STRAIGHTAWAY AFTER THE START
In competition, cars run in a tight group just after the start, and collisions are apt to occur. It is therefore desirable to have a straightaway long enough for the drivers to observe things from the start to the first corner.

4. TRACK SURFACE
For on-road circuits, it is not advisable to have bumps, recessed lines or bulges, as onroad cars have only minimal ground clearance. Some undulations and gentle slopes can be allowed, as long as they do not hinder a car’s running. Sand and dust on paved surfaces reduce traction excessively, and should be washed off with water or swept clean with a broom if possible. For off-road circuits, rough or uneven surfaces are no problem. On the contrary, slopes, jump areas, and banks add to the excitement of racing. Varying surface conditions require more advanced driving skills and proper car setting, thus providing a greater challenge and more total enjoyment. Pebbles should be picked up and tall grass should be removed from the course surface.

PLAN COURSE DRAINAGE CAREFULLY
Unless built indoors, drainage is very important for both on-road and off-road circuits. If possible, slightly raise either side or the center of the course, so that water does not remain on the running surface.

5. COURSE EDGESOn permanent circuits it is recommended to have shortly mowed lawn or artificial turf on the edges. The area between the course and its edges spaces should be level or have a gentle slope, with the outside being higher. This will reduce damage to cars if they leave the course and it ensures easy entry back onto the track. When the spacing between course lanes is very short, some fencing should be used to prevent cars from short cutting across the course.
If you build a temporary circuit using logs, boards etc., these should be 10 to 15cm in height so that the driver’s view is not obstructed. Painting these in light colors will help the drivers recognize the course, and it also enhances a racing atmosphere.

6. DRIVERS’ CONTROL STAND
ln order to provide the best view for drivers, a raised control stand is desirable. You can use large boxes, chairs, or a truck’s platform, but be careful of their sturdiness and stability. The larger a circuit becomes, the higher the control stand should be; however, too tall of a stand is inconvenient to get on and off, and ladders may be required. You should also consider hand rails for safety.

7. SPECTATOR SAFETY
cars travel at very high speeds and can cause serious accidents if they deviate from the course and collide with onlookers. To prevent this, fences of at least 50cm high should be used around the course. Glow engined cars emit noise during running and this can be annoying to others. When choosing a location to run these cars, be aware of the environment so that you do not disturb people around you.

More Tamiya Product on HobbyHot.com

Copyright from TAMIYA RADIO CONTROL GUIDE BOOK 2005

Hobbywing XERun-120A ESC and Tacon 4300kv

2012-03-18T20:24:00.000-07:00

I just installed this setup running 87/24 with a flysky 2.4 remote (dont worry motor temp isnt close to nuking) but my issue is with the setup itself..

Two things when I hit forward, I have to hit it twice for it to go, like forward and reverse are switched since u have to hit neutral first to engage reverse except its backwards. I hit the throttle twice to make it go.

The other issue is braking. when I hit brake it stops the truck, not like a drag brake, but power is killed and I cant get back on throttle until I hit it twice again which is annoying if ur trying to brake into a corner.

So far ive adjusted to it by practicing all day but I rather have the brake function.. My esc setup is set for forward/brake/reverse, no drag brake, no intial brake and reverse 100%. It seemed some feature on my remote is backward but if I switch it to REV mode it doesnt help, I lose reverse and the position of the throttle is switched. So then im thinking maybe switch the wires on the motor and it doesnt help. If I do that now left is right, right is left and i still have no reverse. I then switch the mode in the remote to REV and still no change... im stuck.

http://www.hobbyhot.com/HOBBYWING/

2012-03-17T23:33:00.002-07:00

LEOPARD

LEOPARD Brushless Motor for Airplane
16 products
LEOPARD Brushless Motor for Helicopter
4 products
LEOPARD Ducted Fan System
6 products
LEOPARD Sensored Brushless Motor
3 products
LEOPARD 2 Poles Brushless Motor for Car and Boat
20 products
LEOPARD 4 Poles Brushless Motor for Car and Boat
49 products
LEOPARD Brushless Motor Water-Cool Kit
8 products

LEOPARD POWER MODEL has 15 years experience in manufacturing with precision hardware. Recently LEOPARD POWER MODEL has been developing and producing OBM Brushless Motors and Brushless Governor ESCs.

LEOPARD POWER MODEL keeps a pace with the latest technologies and strives to push the boundaries in developing new products.

2012-03-17T23:31:00.003-07:00

I've been playing around with my new Leopard 60A 3300KV brushless system from HobbyHot.com for a couple days now. Looks like I was the early adopter on this one, so I figured I'd write a little review.

Setup of this system is essentially plug-and-play; the ESC automatically sets up neutral and endpoint settings when you turn it on. Listen for a series of videogame beeps, then a pause, then a different set of beeps, and it's good to go. You do have to be a little creative in finding a spot for the ESC, because the wires for the motor and battery aren't very long. It's also a good idea to wrap electrical tape around the motor connectors after you plug them in, so they don't come unplugged while you're running. (This happened to me twice during my initial test run.)

This is my first brushless system, and I had no idea what to expect in terms of power. I'm quite pleased. It's about on a par with a hot modified brushed motor, but the power curve is different; it runs more like a nitro engine, actually. Instead of running out of steam at higher speeds like a brushed motor does, it keeps pulling strong until the RPMs top out. I did notice a little stutter at low speeds (what I assume is the phenomenon known as "cogging") but only for a second or two; once it got rolling, the throttle response was very smooth and responsive. Right now I have the startup power in the "standard" setting, which starts it out nice and easy and then ramps up after a second or so. This is good for saving gears, I suppose, but the lag is a little annoying. I think I'll try switching it to "high," just to see if it's more responsive. I also need to bump up the reverse power, because right now, it barely moves in reverse.

This ESC uses the "double-click" setup for reverse, like the Tamiya ESCs: First push backwards is all brake until you let off, and then the second push is reverse. I really like this setup better than a delay or a 50:50 setup. You can also turn reverse off. The brakes are weaker than I had hoped, but they do stop the car in a reasonable distance. There are settings for drag brake too, but I haven't played with them yet.

Programming is easy: plug the ESC into the card, turn it on, select the setings you want (via red LEDs), push "Enter," and it beeps. Turn it off, plug it back into the receiver, and you're all set. It includes voltage cutoff settings for NiCd, NiMH, and 2 and 3 cell LiPo and LiFe packs. I'm running it with a cheapo 1500 mAh NiCd pack becasue that's all I have right now, and still getting 10-12 minutes on a pack. You can tell right away when the voltage cutoff kicks in, because the ESC applies full brake. If the car screeches to a halt when you hit the throttle, your battery is done.

The cooling fan on the ESC is a little noisy, but it is effective. The ESC stayed nice and cool during back-to-back runs (25 minutes run time total), and the motor was just warm, but not hot. The batteries, however, were too hot to hold comfortably; you can get away with cheap NiCds, but it puts quite a strain on them. I need to get a better battery pack or two, at least 3000 mAh NiMH. Also, don't try to run with an adapter from the ESC's Deans-style plug to a Tamiya plug; the Tamiya plugs can't handle the juice and you'll trigger the voltage cutoff early. Use a pack with a Deans plug on it.

Right now, I have the system installed in my Lunchbox. I tried a Stadium Thunder, but the old worn-out diff gears weren't up to the task and the splines stripped out. It's overkill for the Lunchbox, but at least I know the gearbox can handle the power. When I have some more money, I want to find a used RC10 or something that can really handle high speeds and try it in that.Leopard Brushless Motor
http://www.hobbyhot.com/LEOPARD/

2012-03-12T21:15:00.005-07:00

Fly Sky FS-TH9X 9 Channel Transmitter

The Fly Sky FS-TH9X is an excellent radio for the price. If you are on a limited budget and looking to upgrade to 2.4 GHz then I highly recommend you take a look at it. At under $100 for a complete combo it doesn't really matter if you knock or drop it.

The FLYSKY 2.4 GHz price wars are really heating up at the moment now that many Chinese manufacturers have entered the market. For the past few years there have been various 2.4 GHz modules coming out of China, with some decent offering from Corona and Assan, now it seems like the Chinese want to make a name for themselves by offering full systems. The Fly Sky FS-TH9X is the first offering that I decided to check out.

I am a diehard Futaba Fasst fan but I am tired of having to sell a kidney or take out a second mortgage every time I have to buy a new receiver for my fleet. The Fly Sky offerings drew my attention with their sub $20 receivers. The Fly Sky FS-TH9X is offered under various brand names but it is basically the same transmitter.

The Fly Sky FS-TH9X is modular system, so specifications may vary depending on the module you select. The transmitter itself is loaded with features, some of which you will usually only find on some high end transmitters.

Specifications

Number of Channels: 8ch PPM/9ch PCM
Display: 128*64 LCD
Support Type: Heli/Acro/Glid
User Models: 8
Stick Modes: 4
Encoder Type: PPM/PCM
Sub Trim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Display: Yes

The menus are clearly and easy to navigate using the 128×64 pixel LCD display. The only issue I had was that the +/- buttons are back to front with the positive on the left.

Available at http://www.hobbyhot.com

source: http://helicopter.dozuki.com/c/Fly_Sky_FS-TH9X_9_Channel_Transmitter

Syma S107G 3Ch coaxial micro heli with gyro Review

2012-03-08T20:15:00.000-08:00

Syma S107G 3Ch coaxial micro heli with gyro Review

I initially purchased one as a gift from hobbyhot. I test flew it and then wrapped it up as a gift. All went well. I wanted an additional tough 3Ch coaxial for my kids to fly so I purchased another Syma S107G from hobbyhot (inexpensive or free shipping). The helicopter is a little heavier than the Phoenix 6010 that I previously purchased but just as tough. In comparison, the Syma is heavier and a bit slower in forward flight. The Syma however handles the air from the airconditioner vent better. The Syma also has a more proportional tail control. So forward flying and turning is easer & more precise on the Syma. There is no shortage of places to get spare parts from and I had ordered a set of spare blades and rear prop from hobbyhot on a later spare parts order I made for my other helicopters. The S107G is a very popular 3Ch indoor heli currently and you will find no shortage of fans of this heli out there. Neither my kids nor I have yet to perminanty damage the helicopter (see TIPS below). But don't consider them indestructable. But for the price, they are a great addition to ANY experianced flyer to have to take a quick flight indoors, even in a small room. My S107G was a Revision 5 circuit board.

Here are som TIPS on the S107G

Charge using the USB cable. Light will be ON when unplugged or fully charged. It may be dimmly lit when charging. Note that the USB plug you plug it into needs to supply sufficient power or it will not work. Some PC USB hubs are NOT powered and you may need to plug directly into PC. I do however you find a USB plug in power supply to charge this helicopter. Charging takes 20-30 minutes depending on discharge of LiPo.
DO NOT keep flying once you loose the power to stay in a hover. You will wear down the LiPo faster this way. You may also elect to time your flight so you fly 30-60 seconds LESS than this point. That will prolong the LiPo life.
To reduce damage, you MUST lower your throttle upon or just before IMPACT with an object. This will help save the blades and motor gears. The helicopter can take a fall from 6' onto carpet better than it can grind it's blades into a wall or bedpost.
The closer you are to an object, the more that object pushes or pulls the helicopter because of the airflow across the blades. So landing on a 2 foot tall stack of books is harder than landing on a magazine on the floor.
If you are not going to fly the helicopter (for say a week), fully charge the helicopter, then fly for 3 minutes and then store the helicopter (powered off of course).

Power Up sequence

Set Tx to channel A
Lower throttle. Turn on Tx
Turn on Helicopter and set down.
There is an LED that will stop flashing under the canopy on the back left of the circuit board when it's initialized. This takes 5-10 seconds.
Slowly raise throttle.

Fly Sky FS-GT3B 2.4Ghz radio reviewed

2012-03-07T21:39:00.000-08:00

i just brought this FLYSKY FS-GT3B from hobbyhot.com

http://www.hobbyhot.com/Fly-Sky-FS-GT3B-3ch-2.4GHz-LCD-Transmitter-Receiver.html

just USd 34.5

Transmitter Specifications
Dimension: 154 x 127 x 270mm
Net Weight: 395g
ANT Length: 26mm (2.4GHz)
Channels: 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
LCD Dimension: 100mm (L:95 x W:3mm) / 4 inches (L:3`12 x W:1`3 inches)
RF Power: no more than 10mW
Low Voltage Warning: Yes (less than 9.5V)
DSC port: Yes (3.5mm)
Charger Port: Yes
Power: 12V DC (1.5V x 8)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC

Receiver Specifications
Dimension: 37.6 x 22.3 x 13mm
Net Weight: 5g
ANT Length: 26mm
Channels 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
RF Receiver Sensitivity: -105dbm
Power: 4.5 - 6V DC (1.5V x 4)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter

2012-03-07T21:33:00.001-08:00

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter + Receiver available at Hobbyhot.com

Introduction
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

* All of the above information and pictures are reference only. Color may be changed.

RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)

2012-02-21T00:28:00.000-08:00

New Arrival! RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)

RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction
Air Clown Fish swim through the air with incredibly smooth and life-like motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms (not for outdoor use). They require only for AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control.

Simply fill your Air Shark with helium inexpensively at any part store, florist shop, or grocery store that carries balloons. The body is made from a high quality, durable nylon material that will stay inflated for weeks! You can fill it again and again.
Remote control has never come to lift so magically!

Specifications
Controller: Infra-red
Remote Functions: climb,descend and tail fin control
Range: up to 40 feet
Length(with tail): 57 inches
Height(with fins): 36 inches
Battery: 4 x 1.5V AAA batteries (not included)
Require Gas: Helium (not included)

Features
Moves like a real fish
Steers in any direction
Easy indoor fun
Full Function: Up, Down, Forward, Left Turn, Right Turn
Control Range: about 8m

New Arrival! Prolux RC Model Fast Fueller Hand Fuel Pump

Prolux RC Model Fast Fueller Hand Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions (approximately): 105mm x 52.5mm x 60mm

Features
- New generation fuel pump with compact size
- Double injection, using TPR material that has a comfortable feel
- Improved gear mesh and make the large flow rate 18cc/sec
- Advanced pump unit design, glow fuels and gasoline are both compatible
- Includes filter fuel nozzle and 19" silicon fuel tubing

New Arrival! Prolux RC Model Fast Hand Held Fuel Pump

Prolux RC Model Fast Hand Held Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions (approximately): 105mm x 52.5mm x 60mm

Features
- The latest easy-to-use design that fits comfortably in your hand.
- Molded fuel-proof Nylon case and injection filled with fiberglass.
- Improved gear mesh mechanism makes hand-cranking easier.
- Advanced pump unit design allows fast filling without leakage.
- Nitro fuels and gasoline are both compatible. ( Net Weight )
- Includes filter, fuel nozzle, self-tapping screws and 19`` of silicone fuel tubing.

New Arrival! Wish V2 RC Model Hand Crank Fuel Pump

Wish V2 RC Model Hand Crank Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications

Dimensions (approximately): 105mm x 52.5mm x 60mm

Features

The latest easy-to-use design that fits comfortably in your hand.
Molded fuel-proof Nylon case and injection filled with fiberglass.
Improved gear mesh mechanism makes hand-cranking easier.
Advanced pump unit design allows fast filling without leakage.
Nitro fuels and gasoline are both compatible. ( Net Weight )
Includes filter, fuel nozzle, self-tapping screws and 19` of silicone fuel tubing.

Package Included

1 x Wish V2 RC Model Hand Crank Fuel Pump

New Arrival! LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 48A
Lipo Cell: 2 - 5s
Max. Power: 1000W
Rotational Speed: 2950KV
Mounting Hole Depth: 5mm
Shaft Diameter: 4mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 50mm
Weight: 145g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 3s
Max. Power: 390W
Rotational Speed: 4420KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 4s
Max. Power: 390W
Rotational Speed: 2960KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! RC Plane Model 3000KV Brushless Motor 70mm Golden Ducted Fan

RC Plane Model 3000KV Brushless Motor 70mm Golden Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Rotational Speed: 3000 RPM/V
Continuous Current: 22A
Max. Current: 30A
Input Voltage: 8 - 16V
No Load Current: 1.8A
Internal Resistance: 129m ohm
Motor-70mm-Golden-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 73mm x 58mm
Motor-70mm-Golden-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 70mm x 58mm
Input Motor-70mm-Golden-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-70mm-Golden-Ducted-Fan.html>Battery Motor-70mm-Golden-Ducted-Fan.html>battery li-po nimh nicd types:>

New Arrival! RC Plane Model 3300 KV Airplane Outrunner Brushless Motor Ducted Fan

RC Plane Model 3300 KV Airplane Outrunner Brushless Motor Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications

Rotational Speed: 3300 RPM/V
Continuous Current: 22A
Max. Current: 30A
Input Voltage: 8 - 18V
No Load Current: 1.8A
Internal Resistance: 128m ohm
Motor Dimensions (Diameter x Length): 27.7mm x 41mm Motor-Ducted-Fan.html>MOTOR x length): (diameter dimensions 41mm 27.7mm>
Shaft Dimensions (Diameter x Length): 3.96mm x 13.5mm
Motor-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 73mm x 58mm
Motor-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 70mm x 58mm
Input Motor-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-Ducted-Fan.html>Battery Motor-Ducted-Fan.html>battery li-po nimh nicd types:>

Package Included

1 x RC 3300 RPM/V Outrunner Brushless Motor 70mm Motor-Ducted-Fan.html>Ducted Fan

New Arrival! RC Plane Model 4200KV Brushless Motor 55mm Air Ducted Fan

RC Plane Model 4200KV Brushless Motor 55mm Air Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Rotational Speed: 4200 RPM/V
Continuous Current: 18A
Max. Current: 25A
Input Voltage: 8 - 16V
No Load Current: 1.2A
Internal Resistance: 102m ohm
Motor-55mm-Air-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 59mm x 42mm
Motor-55mm-Air-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 56.5mm x 42mm
Input Motor-55mm-Air-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-55mm-Air-Ducted-Fan.html>Battery Motor-55mm-Air-Ducted-Fan.html>battery li-po nimh nicd types:>

New Arrival! RC Air Shark Remote Control Flying Fish Airship Toy (Complete Set) AS200

RC Air Shark Remote Control Flying Fish Airship Toy (Complete Set) AS200
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction
Air Shark swim through the air with incredibly smooth and life-like motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms (not for outdoor use). They require only for AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control.

New Arrival! HobbyHot RC Model Remove Ball Link Pincer Tool Plier

HobbyHot RC Model Remove Ball Link Pincer Tool Plier
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications

Dimensions: 132mm x 62mm x 16mm
Material: Steel and Plastic

Package Included

1 x RC Model Remove Ball Link Pincer Tool (Black)

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
SKYWALKER 20A RC Brushless Speed Controller ESC USD12.10 only
HOBBYMATE RC Model HB730 Dual Rate and Head Lock Gyro USD23.90 only
CX450-01-09 Main Shaft USD4.70 only
LEOPARD Model 5682 KV1360 4 Poles Brushless Motor USD135.90 only
Corona RP8D1 8ch 35MHz Dual Conversion Receiver for Futaba JR SANWA USD18.90 only
Walkera HM-38-Z-26 Brushless Speed Controler USD13.00 only
RC-Tools S80 Toolbox (Helicopter) USD22.50 only
LEOPARD Model 4074 KV2000 4 Poles Brushless Motor USD74.90 only
Walkera HM-59DQ-Z-10 Main Rotor Shaft USD3.50 only
HobbyHot Aluminum 84mm Oil Shock Damper (2pcs) USD7.30 only
Walkera HM-4#3-Z-01 Main Rotor Blade USD2.60 only
Swanghobby Aluminium 95mm Diameter Spinner USD39.30 only
SWANGHOBBY 2.3mm Shaft Diameter Propeller Adaptor USD1.90 only
LEOPARD Model 2835 KV1880 RC Outrunner Brushless Motor & Propeller Adaptor USD29.90 only
RCS 2700mAh 11.1V 30C LiPo Lithium Polymer Battery USD33.90 only
HB-22 LED Tire Light USD9.49 only
Silver Safe Bag 300 x 220mm LiPo Safety Fireproof USD8.90 only
Futaba S9255 Digital Servo USD96.20 only
SWANGHOBBY Voltage and Current Checker USD5.90 only
Spyapple M-100 GSM SIM Card SPY Listener USD38.10 only

New Arrival! HobbyHot Beep Beep Finder for RC Airplane / Helicopter

2012-02-16T22:40:00.000-08:00

New Arrival! HobbyHot Beep Beep Finder for RC Airplane / Helicopter

HobbyHot Beep Beep Finder for RC Airplane / Helicopter
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Dimensions: 17 x 13 x 10mm
Operating Voltage: 4 - 6V
Current Drain: 1?- 35mA
Net Weight: 5g

Features
- Suitable Controller: All PPM/FM, PCM/FM, AM Transmitter / Receiver
- Loud >85DB alarm gets your attention
- Works with AM/FM PPM or FM/PCM RC systems
- Plugs into any standard servo channel
- Small dimensions and weight

New Arrival! HOBBYWING XERUN 3672SD KV4000 Sensored Motor & SCT PRO 120A ESC + LCD Card

HOBBYWING XERUN 3672SD KV4000 Sensored Motor & SCT PRO 120A ESC + LCD Card
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

ESC-LCD-Card.html>ESC-LCD-Card.html>escr>ESC-LCD-Card.html>ESC-LCD-Card.html>Motor Specifications
Model: XERUN 3672SD KV4000 4.5T Sensored Brushless ESC-LCD-Card.html>ESC-LCD-Card.html>Motor
Rotational Speed: 4000 KV
ESC-LCD-Card.html>ESC-LCD-Card.html>Motor Dimensions (Diameter x Length): 36mm x 71.5mm
Shaft Dimensions (Diameter x Length): 5mm x 17mm
Input ESC-LCD-Card.html>ESC-LCD-Card.html>Motor-SCT-PRO-120A-ESC-LCD-Card.html>ESC-LCD-Card.html>Battery Types: NiCd/ Nimh/ Li-po ESC-LCD-Card.html>ESC-LCD-Card.html>Motor-SCT-PRO-120A-ESC-LCD-Card.html>ESC-LCD-Card.html>Battery
Recommend Model: RC Model 1/8 Car

ESC-LCD-Card.html>ESC-LCD-Card.html>Motor Features
- High efficiency (>90%)
- New design with lighter weight but bigger torque
- Higher power than the competition, faster acceleration and highter top speed
- NMB precision ball bearings ensure longer life
- Neodymium agnets ensure high power output

ESC-LCD-Card.html>ESC Specifications
Model: XERUN-SCT-PRO
Dimension: 53.5mm(L) x 36mm(W) x 36mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0004 ohm
ESC-LCD-Card.html>ESC-LCD-Card.html>Motor Turns: (2S Lipo: KV<=6000) / (3S Lipo: KV<=4000) / (4S Lipo: KV<=3000)
ESC-LCD-Card.html>ESC-LCD-Card.html>Motor-SCT-PRO-120A-ESC-LCD-Card.html>ESC-LCD-Card.html>Battery: 6-12 cells NiMH / NiCd or 2-4S Li-Po
BEC Output: 6V/3A Built-in BEC
Cooling Fan Working Voltage: Working under 6V

Net Weight: 99g
Suitable Model: 1/10 and 1/8 Scale Truggy or Buggy

ESC-LCD-Card.html>ESC Features

Suitable for 1/10 and 1/8 scale short course trucks and 1/8 scale buggies.

Compatible with sensored and sensorless brushless ESC-LCD-Card.html>ESC-LCD-Card.html>Motor-SCT-PRO-120A-ESC-LCD-Card.html>ESC-LCD-Card.html>motors, with the best control feelings.

The built-in switching mode BEC has a powerful output to supply all electronic equipments even with 4S Lipo input.

Excellent start-up, acceleration and linearity.

Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / ESC-LCD-Card.html>ESC-LCD-Card.html>Motor blocked protection.

Easily programmed with only one button and compatible with pocket-sized program card (Optional equipment) and the advanced LCD Program Box (Optional equipment).

ESC-LCD-Card.html>ESC firmware can be updated through an USB adapter on the LCD Program Box (Optional equipment).

Splash proof and dust proof.

Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC-LCD-Card.html>ESC, it works in the following 2 ways:

ESC-LCD-Card.html>ESC-LCD-Card.html>escr>1. Working as an individual device to set the ESC-LCD-Card.html>ESC, the value of each parameter is displayed on its own LCD screen.

ESC-LCD-Card.html>ESC-LCD-Card.html>escr>2. Working as an USD adapter to link the ESC-LCD-Card.html>ESC with a PC, and the user can update the firmware of the ESC-LCD-Card.html>ESC or set the ESC-LCD-Card.html>ESC by the special application software on PC.

ESC-LCD-Card.html>ESC-LCD-Card.html>escr>Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC-LCD-Card.html>ESC HOBBYWING / TEKMODEL

Programmable Items
The programmable item for the CAR ESC-LCD-Card.html>ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
9. Timing
10. Over-Heat Protection
11. ESC-LCD-Card.html>ESC-LCD-Card.html>Motor Rotation
12. Lipo Cells

New Arrival! HOBBYWING XERUN SCT PRO Blue 120A RC Brushless Motor ESC Speed Controller

HOBBYWING XERUN SCT PRO Blue 120A RC Brushless Motor ESC Speed Controller
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

ESC-Speed-Controller.html>ESC-Speed-Controller.html>escr>

Specifications
Model: XERUN-SCT-PRO
Dimension: 53.5mm(L) x 36mm(W) x 36mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0004 ohm

ESC-Speed-Controller.html>ESC-Speed-Controller.html>Motor Turns: (2S Lipo: KV<=6000) / (3S Lipo: KV<=4000) / (4S Lipo: KV<=3000)
ESC-Speed-Controller.html>ESC-Speed-Controller.html>Motor-ESC-Speed-Controller.html>ESC-Speed-Controller.html>Battery: 6-12 cells NiMH / NiCd or 2-4S Li-Po
BEC Output: 6V/3A Built-in BEC
Cooling Fan Working Voltage: Working under 6V

Net Weight: 99g
Suitable Model: 1/10 and 1/8 Scale Truggy or Buggy

Features

Suitable for 1/10 and 1/8 scale short course trucks and 1/8 scale buggies.

Compatible with sensored and sensorless brushless ESC-Speed-Controller.html>ESC-Speed-Controller.html>Motor-ESC-Speed-Controller.html>ESC-Speed-Controller.html>motors, with the best control feelings.

The built-in switching mode BEC has a powerful output to supply all electronic equipments even with 4S Lipo input.

Excellent start-up, acceleration and linearity.

Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / ESC-Speed-Controller.html>ESC-Speed-Controller.html>Motor blocked protection.

Easily programmed with only one button and compatible with pocket-sized program card (Optional equipment) and the advanced LCD Program Box (Optional equipment).

ESC-Speed-Controller.html>ESC firmware can be updated through an USB adapter on the LCD Program Box (Optional equipment).

Splash proof and dust proof.

New Arrival! HobbyHot Waterproof 50A Speed Controller ESC for Boat

HobbyHot Waterproof 50A Speed Controller ESC for Boat
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction

The HM-50 ESC-for-Boat.html>ESC-for-Boat.html>esc allows remote control of boat electric ESC-for-Boat.html>ESC-for-Boat.html>motors from an RC system. When connected with ESC-for-Boat.html>ESC-for-Boat.html>motor, it is capable of supplying up to 50 Amps (forward) or 20A (backward) of continuous ESC-for-Boat.html>ESC-for-Boat.html>motor current. Its integrated ESC-for-Boat.html>ESC-for-Boat.html>Battery Eliminator Cirsuit (BEC) powers the Receiver from the ESC-for-Boat.html>ESC-for-Boat.html>motor ESC-for-Boat.html>ESC-for-Boat.html>battery, with automatic cutoff of the ESC-for-Boat.html>ESC-for-Boat.html>motor power to preserve Receiver power as the ESC-for-Boat.html>ESC-for-Boat.html>battery becomes depleted. It is small and powerful, waterproof, can be used for different type of boat.

Specifications

Dimensions: 42mm x 47mm x 13mm
Working Voltage: 5-10 cells, 6-12v
BEC Current: 5V/1A
Low ESC-for-Boat.html>ESC-for-Boat.html>Battery Cutoff: 5V ESC-for-Boat.html>ESC-for-Boat.html>battery 5v cutoff:>
Continuous Output Current: 50A forward, 20A backward
Brust Output Current: 100A forward, 30A backward
Cable Length: 110mm (ESC-for-Boat.html>ESC-for-Boat.html>Battery & ESC-for-Boat.html>ESC-for-Boat.html>Motor),230mm (Receiver) ESC-for-Boat.html>ESC-for-Boat.html>motor),230mm & (ESC-for-Boat.html>ESC-for-Boat.html>battery 110mm>
Cable Type: 14 AWG (ESC-for-Boat.html>ESC-for-Boat.html>Battery & ESC-for-Boat.html>ESC-for-Boat.html>Motor) ESC-for-Boat.html>ESC-for-Boat.html>battery ESC-for-Boat.html>ESC-for-Boat.html>motor) awg 14 type:>
Input ESC-for-Boat.html>ESC-for-Boat.html>Battery Types: NiCd or Nimh ESC-for-Boat.html>ESC-for-Boat.html>battery nimh nicd types: or>
Recommend Model: Ship

Features

Reversion Function
Low-Voltage, Cut Electricity Protection Function

Package Included

1 x Waterproof 50A ESC-for-Boat.html>ESC (with English Manual)

New Arrival! HOBBYHOT 3.7g Airplane & Helicopter R/C Hobby Mini Servo SS055

HOBBYHOT 3.7g Airplane & Helicopter R/C Hobby Mini Servo SS055
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Dimensions: 26.8 x 19.9 x 8.2mm
Operating Speed (4.8V no load): 0.12sec / 60 degrees
Stall Torque (4.8V): 1.1 kg/cm
Certificate: CE, FCC
Temperature Range: - 30 to + 60 degree C
Dead Band Width: 4usec
Operation Voltage: 4.8 - 6.0 Volts
Recommend Model: Helicopter & Airplane

Features
- Translucent Body
- Light Weight
- Less Noise
- Connector Wire Length 150mm

Package Included
1 x RC Model 3.7g Airplane & Helicopter Mini Servo SS055

New Arrival! HOBBYMATE RC Model HB730 Dual Rate and Head Lock Gyro

HOBBYMATE RC Model HB730 Dual Rate and Head Lock Gyro
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Introduction

escr>

HB730 is a gyro with function of dual rate and head lock, which designed for

新裝修 - 馬鞍山新港城

2011-03-17T07:57:00.001-07:00

http://www.besthome.com.hk/property/sausalito_ads-74.html
http://www.besthome.com.hk/property/sunshine-city_ads-73.html

新裝修 - 馬鞍山新港城

BestHome編號 : 73

物業地址	馬鞍山» 新港城第D座低層8室
盤源	代理盤
樓盤類別	私人屋苑
建築面積	606呎
售價	$350萬
呎價	$5776元
睡房數目	3間
浴室/洗手間	2間
樓盤介紹	全新裝修

New Arrival! Hobbywing 0.25A Cooling Fan for Car ESC

2010-12-30T16:44:00.001-08:00

New Arrival! Hobbywing 0.25A Cooling Fan for Car ESC

Hobbywing 0.25A Cooling Fan for Car ESC
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

Change the cooling fan coming with the ESC to have a great cooling effect and protect your ESC.

Specification

- Input: 7-12cells NiMh /NiCd or 3-4 cells Li-Po.

- Size: 25 x 25 x 10mm

- Weight: 7.2g

New Arrival! Hobbywing 0.12A Cooling Fan for Car ESC

Hobbywing 0.12A Cooling Fan for Car ESC
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

Change the cooling fan coming with the ESC to have a great cooling effect and protect your ESC.

Specification

- Input: 7-12cells NiMh /NiCd or 3-4 cells Li-Po.

- Size: 25 x 25 x 7mm

- Weight: 7.2g

New Arrival! G.T. Power RC Car Flashing Light System

G.T. Power RC Car Flashing Light System
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

It is the first choice by most RC cars amateurs because of the easy way to install and operate. Please read this manual carefully in order to reach the ideal effect that you want. We are sure your RC cars will run sharply on the racing track by our product.

Specification

- Input voltage: 4.8v �V 6.0v

- Working current: 100mA

- Dimension: 47 x 30 x 12mm

- LED wire: 350mm

- Control wire: 280mm

- Power core connection wire: 200mm

- Weight: 50g

Package Content

- Car LED x 12

- Car LED Holder x 12

- Control Box x 1

- Power Connection Wire x 1

- Control Connection Wire x 1

- Accessories Parcel x 1 set

New Arrival! CopterX 6 Channel CX-CR6A Receiver

CopterX 6 Channel CX-CR6A Receiver
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

- Computerized full range 6 CH radio for both airplane and helicopter

- Easily programmable

- 2.4 GHz ID assignment technology for glitch free and anti hijack operations

- User programmable switches for different functions

- Remote Gyro gain and pitch curve control for quick adjustment

- Mixings for different application and pilot's needs

- Due antennas design for full range performance

- 6-Channel

- 2.4GHz

Specification of CX-CR6A Receiver

- Operation Voltage: 4.8v

- Batteries: AA batteries x 8

- Dimensions: 47 x 24 x 14mm

- Weight: 10g

New Arrival! Corona CR4D 2.4GHz DSSS Receiver

Corona CR4D 2.4GHz DSSS Receiver
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

Suitable for Futaba and JR Controller with CT8F/CT8J

Specification

- Range: >1000M/3250ft

- Sensitivity: -100dbm

- Number of Channel: 1-4

- Operating voltage: 4.8V-6V

- Operating current: 30mA

- Transfer rate: 128kpbs

- Resolution: 10bit

- Compatible with: CT8F/CT8J (DSSS)

- Latency: 22ms

- Diameter: 39.5 x 18.5 x 6.5mm

- Net Weight: 3.9g

New Arrival! Flyermate Atlantis Series 2450Kv Brushless Motor

Flyermate Atlantis Series 2450Kv Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specification

- Rpm(Kv): 2450

- Working Voltage: 8v �V 18v

- motor-pr-1784.html>Battery Type: Li-Polymer motor-pr-1784.html>Battery

- Continuous Current: 70A

- Max. Current: 85A

- Shaft Length: 15mm

- Shaft Diameter: 5mm

- Motor Diameter: 46mm

- Total Length: 59mm

- Net Weight: 316g

New Arrival! Flyermate Atlantis Series 3900Kv Brushless Motor

Flyermate Atlantis Series 3900Kv Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specification

- Rpm(Kv): 3900

- Working Voltage: 12v

- motor-pr-1782.html>Battery Type: Li-Polymer motor-pr-1782.html>Battery

- Continuous Current: 45A

- Max. Current: 55A

- Shaft Length: 9mm

- Shaft Diameter: 3mm

- Motor Diameter: 39mm

- Total Length: 56mm

- Net Weight: 167.2g

New Arrival! APC Thin E 16 x 12 Electric RC Airplane Composite Propeller

APC Thin E 16 x 12 Electric RC Airplane Composite Propeller
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature

APC Landing Products RC thin electric composite model airplane propeller is designed for use with electric RCairplanes. Includes locating rings in various sizes and instructions on adaptation procedures.

APC Landing Products electric model airplane propellers have enjoyed strong acceptance and growth since their introduction in 1989. They are especially popular in RC pattern flying and RC airplane racing events. The performance and low noise advantages are largely spawned by the precision methods APC - Landing Products uses to design and manufacture APC electric RC airplane propellers.

APC - Landing Products preserves a close rapport with the RC aircraft competition community to benefit from technical interchange so important to improved RC airplane propeller designs. There is continuous evolution in RC aircraft design and engine performance. Consequently, propeller design must continuously evolve as well to keep pace with these improving technologies.

Due to APC's excellent quality and consistent performance APC - Landing Products' RC airplane propellers are perfect for any electric RC application from park flyers to 3D aerobatics to scale RC aircraft.

Note: This RC airplane propeller is designed only for use with electric motors. Do not attempt to use this propeller with glo or gas powered engines.

Specification

- Length: 16 inches

- Pitch: 12 inches per revolution

- Type: Thin Electric

- Material: 1 Piece Composite

- Use: Electric RC Airplanes

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Bydico Apple Universal Charger with Card Reader USD5.99 only
TAMIYA 74018 Crafr Tools Handy Craft Saw USD6.20 only
Futaba S9202 Servo USD54.80 only
JXD RC 3ch Red Gyro LED Mini Helicopter RTF USD18.90 only
SWANGHOBBY 3.0mm Shaft Diameter Propeller Adaptor USD1.90 only
HOBBYWING XERUN Blue V2 Brushless Motor 60A ESC USD66.90 only
RC-Tools S200B Toolbox For Helicopter USD79.20 only
Futaba Wide Neck Strap USD10.60 only
RockySecurity 5mW Green Laser Pointer USD16.60 only
Clipped Wing Cub EP Electric Plane Kit(Yellow/Blue/Red) USD99.90 only
Walkera HM-5G4Q3-Z-10 T-Shape Holder USD3.10 only
MILI POWER SPRING 4 iPHONE 4 POWER PACK USD66.90 only
Walkera HM-4#3-Z-10 Swashplate USD5.90 only
Walkera HM-4#3B-Z-04 Flybar Connector USD1.90 only
OS Engine Glow Plug LC4 USD7.10 only
EMax 1200kv CF2822 Outrunner Motor USD8.90 only
CX450-06-01 Wooden Main Rotor Blade USD8.30 only
Tamiya 87041 Craft Tools Tire Marker USD8.00 only
Futaba BLS253 Brushless High-Torque Servo USD113.60 only
RCS R4303 RC High Speed & Torque Standard Servo USD6.90 only

Corona RP8D1 8ch 72MHz Dual Conversion Receiver for Futaba JR SANWA

2010-12-16T00:14:00.001-08:00

New Arrival! Corona RP8D1 8ch 72MHz Dual Conversion Receiver for Futaba JR SANWA

Corona RP8D1 8ch 72MHz Dual Conversion Receiver for Futaba JR SANWA
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction
Synthesized receivers get rid of the inconvenience of using a crystal. Receivers with a crystal still use the technology of 1970��s where the user has to change the crystal to switch to a different frequency. Users are either stuck to one frequency or have to bring more (expensive) crystals to flying field. In addition, every time the crystal is change there is a chance of damaging the receiver.
With a synthesized receiver, all you need to do is push the button to switch to any channel you are transmitting at.
With Corona��s technology in developing and manufacturing of R/C products, the RP8D1 8CH Dual conversion receiver become the smallest in the world. But do not only focus on its small size. Its high performance will also surprise you!

Features
You can switch the frequency freely with the RP8D1 8ch dual conversion synthesized receiver.
The ��one button�� function makes it extremely easy to change frequency.
Despite the small size, the receiving range reaches as far 1 mile!
The dual ceramic IF filters ensure ultra narrow selectivity, and can reject adjacent channel interference effectively.
The RP8D1 can identify the shift polarity of the transmitter (FUTBA, JR) automatically.
DSP technology filters noise intelligently eliminates glitches effectively.
Failsafe function to put servos in a predetermined position in case of lost signal reception.

Specifications
Dimensions 46 x 24 x 13mm
1.8 x 0.9 x 0.5 inches
Net Weight 9.2g (with shrink wrap)
Frequency 72MHz
No. of Channel 8ch
Operating Voltage 4.8 - 6V DC
Operating Current 17mA
Max. Distance Range 1500M / 4900ft
Sensitivity better than 2uV
Selectivity +8 kHz at 65 dBdown
Filtering Dual turned RF circuitry, Dual 4 pole ceramic filiter, DSP filtering with mild algorithm
Modulate FM / PPM
Intermediate Frequency 10.7MHz
IP3 +10dBm

Package Content
Corona RP8D1 8ch 72MHz Dual Conversion Receiver x 1

New Arrival! TAMIYA 87013 Flat Model Paint Brush No.5

TAMIYA 87013 Flat Model Paint Brush No.5
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Features
TAMIYA 87013 Flat Model Paint Brush No.5
High quality, easy to use performance.
Made of fine horse hair from Chinese and American horses.
Off-white colored bristles.
This brush would better be used for painting larger areas.
Natural colored wood handle.
Burgundy imprint.

Specifications
Length: 9 inches
Bristle Width: 5/8 inches

Package Content
TAMIYA 87013 Flat Model Paint Brush No.5 x 1

New Arrival! TAMIYA 87017 Pointed Model Paint Brush - Small

TAMIYA 87017 Pointed Model Paint Brush - Small
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Features
TAMIYA 87017 Pointed Model Paint Brush - Small
High quality, easy to use performance.
Made of fine horse hair.
Off-white colored bristles.
Small plastic ferrule.
Natural wood handle.
Plastic protective sleeve for bristles.

Specifications
Length: 7-3/4 inches
Bristle Width: 1.5mm

Package Content
TAMIYA 87017 Pointed Model Paint Brush - Small x 1

New Arrival! TAMIYA 74018 Crafr Tools Handy Craft Saw

TAMIYA 74018 Crafr Tools Handy Craft Saw
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Package Content
TAMIYA 74018 Crafr Tools Handy Craft Saw x 1

New Arrival! TAMIYA 74017 Craft Tools Paint Stirrer

TAMIYA 74017 Craft Tools Paint Stirrer
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Package Content
TAMIYA 74017 Craft Tools Paint Stirrer x 1

New Arrival! TAMIYA 74032 Craft Tools 2mm E-ring Tool

TAMIYA 74032 Craft Tools 2mm E-ring Tool
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Package Content
TAMIYA 74032 Craft Tools 2mm E-ring Tool x 1

New Arrival! TAMIYA 74002 Craft Tools Long Nose Pier w/Cutter

TAMIYA 74002 Craft Tools Long Nose Pier w/Cutter
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Package Content
TAMIYA 74002 Craft Tools Long Nose Pier w/Cutter x 1

New Arrival! TAMIYA 53370 Monster Truck Light Set

TAMIYA 53370 Monster Truck Light Set
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Features
2 light bulbs and 5 LEDs
Cables
Switch

Package Content
TAMIYA 53370 Monster Truck Light Set x 1

New Arrival! TAMIYA 71109 Mechanical Tiger Four Leg Walking Type

TAMIYA 71109 Mechanical Tiger Four Leg Walking Type
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Robocraft Series
This series is consists mainly of robots with mechanical and unique movement realized via motor. Colored clear body and clear gearbox enable demonstration of mechanical functions. Tools are supplied and no cement is required for easy assembly. Rubber tubing allows easy wiring. The see-through look, itself makes this model quite the cool-looking desk ornaments. Batteries are not included in the Model Kit.

Model Details
Tamiya now presents the Mechanical Tiger as its next addition to the Robocraft Series. Power from the rotating motor is transferred to the legs via crank plates to make the tiger walk. Tiger`s body parts have been molded with yellow semi-transparent plastic, giving the tiger a futuristic look. Assembly is very simple with use of screws and snap-lock parts.

Specifications
Total length: 155 mm
Total weight: 105 g (without batteries)
Body material: ABS resin
Gearbox, motor, control switch, and decorative stickers are included.
2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds.
A screwdriver for the assembly is provided.
Requires one AA (a.k.a. R6 or UM4) battery (sold separately).
Continuous running time with Alkaline battery: 2 hours.

Package Content
TAMIYA 71109 Mechanical Tiger x 1

New Arrival! TAMIYA 71101 Mechanical Dog Four Legs Walking Type

TAMIYA 71101 Mechanical Dog Four Legs Walking Type
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Model Details
The dog walks by transferring motor revolution to reciprocating motion via crank and linkage rod. Main body and legs are made of transparent yellow parts to allow viewing of internal mechanisms. Construction is simple as parts can easily be attached with screws. Wiring has also been made simple.

Specifications
Total length: 165 mm
Total weight: 100 g (without batteries)
Body material: ABS resin
2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds.
Spring tail also included.
Gearbox, motor, and control switch are included.
Requires one AA (a.k.a. R6 or UM3) battery (sold separately).
Continuous running time with Alkaline battery: 2hrs. at low speed / 1hr. at high speed

Package Content
TAMIYA 71101 Mechanical Dog x 1

New Arrival! Tamiya 71105 Mechanical Giraffe Four-Leg Walking Type

Tamiya 71105 Mechanical Giraffe Four-Leg Walking Type
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Model Details
Tamiya presents its next Robocraft Series item, the 4-leg walking-type Mechanical Giraffe. Motor rotating power is transferred to the legs via crank plates to make the Giraffe walk. The long neck and legs, which have been specially molded to replicate the unique motifs of the actual giraffe, and body on which the gearbox is mounted employ transparent-colored parts, giving the giraffe a funky look. Reverse switch is also transparent, giving you a peek at the giraffe`s internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

Specifications
Total length: 190 mm
Total weight: 110 g (without batteries)
Body material: ABS resin
Gearbox, motor, and control switch are included.
A screwdriver for the assembly is provided.
Requires one AA (a.k.a. R6 or UM3) battery (not included)
Continuous running time with Alkaline battery: 1.5 hrs

Package Content
TAMIYA 71105 Mechanical Giraffe x 1

New Arrival! TAMIYA 71111 Mechanical Pig Shaking-head Type

TAMIYA 71111 Mechanical Pig Shaking-head Type
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Model Details
Introducing the latest addition to the popular Robocraft Series, the Mechanical Pig with shaking head action. Pig`s body and head parts have been molded with pink semi-transparent plastic, giving the pig a futuristic look. Assembly is very simple with use of screws and snap-lock parts.

Specifications
Total length: 135 mm
Total weight: 95 g (without batteries)
Body material: ABS resin Gearbox
motor, gearbox, and control switch are included.
Comes with a small flag that can be attached on the back of the pig.
A screwdriver for assembly is provided.
Requires one AAA (a.k.a. R03 or UM4) battery (sold separately).
Continuous running time with Alkaline battery: 1 hour

Package Content
TAMIYA 71111 Mechanical Pig (Shaking-head Type) x 1

New Arrival! Green 50cm Flash Knight Rider Lights 48 LED Car Led Strip

Green 50cm Flash Knight Rider Lights 48 LED Car Led Strip
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specification
Colour: Green
Length with No. of LED Bulb: 50cm with 48 LED
Voltage: 12V

Features
1. More than 10 kinds of scan mode, with a tailing effect, adjustable scan speed.
2. There is power failure memory function (First set the power-off feature, power down before the next pass, or mode) Can aut omatically transform all modes according to the other cycle can also be switch selected as a model, And all of the features available through the wireless remote control.
3. The new function: to increase a positive line, which can be accessed in the automotive brake light circuit, When the brake, regardless of any mode, have become explosive flash, served as a warning. (You can also access the door seitch will ope the door burst flash)
4. Knight Rider lights used in all made of ultra-bright Piranha LED energy saving long life.
5. Waterproof, shockproof, anti-corrosion.

Guide
Wireless Remote Control
1. Press A key to slowing effect of change model
2. Press B key to select multiple different model cycle
3. Press C key to speed up the changing pattern of effects
4. Press D key is the power on or off

Package Content
Green 50cm Flash Knight Rider Lights 48 LED Car Led Strip x 1

New Arrival! Corona RD620II 6ch 72MHz Dual Conversion Receiver

Corona RD620II 6ch 72MHz Dual Conversion Receiver
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions 46 x 21 x 8mm
1.8 x 0.8 x 0.3 inches
Net Weight 8.2g
Frequency 72MHz
No. of Channel 6ch
Modulate FM/PPM
Operating Voltage 4.8 - 6V DC
Operating Current 11mA
Max. Distance Range 1500M / 4900ft
Crystal Size HC-50
System Dual Conversion
Selectivity Better than 2.0?V
+8 kHz at 65 dBdown
Filtering Dual turned RF circuitry
Dual 4 pole ceramic filter
DSP filtering with mild algorithm
Shift Polarity Positive or Negative (auto?detect)
Intermediate Frequency 10.7MHz
IP3 +10dBm

Package Included
Corona RD620II 6ch 72MHz Dual Conversion Receiver x 1

New Arrival! Corona RD620II 6ch 40MHz Dual Conversion Receiver

Corona RD620II 6ch 40MHz Dual Conversion Receiver
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions 46 x 21 x 8mm
1.8 x 0.8 x 0.3 inches
Net Weight 8.2g
Frequency 40MHz
No. of Channel 6ch
Modulate FM/PPM
Operating Voltage 4.8 - 6V DC
Operating Current 11mA
Max. Distance Range 1500M / 4900ft
Crystal Size HC-50
System Dual Conversion
Selectivity Better than 2.0?V
+8 kHz at 65 dBdown
Filtering Dual turned RF circuitry
Dual 4 pole ceramic filter
DSP filtering with mild algorithm
Shift Polarity Positive or Negative (auto?detect)
Intermediate Frequency 10.7MHz
IP3 +10dBm

Package Included
Corona RD620II 6ch 40MHz Dual Conversion Receiver x 1

New Arrival! Corona RD620II 6ch 35MHz Dual Conversion Receiver

Corona RD620II 6ch 35MHz Dual Conversion Receiver
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions 46 x 21 x 8mm
1.8 x 0.8 x 0.3 inches
Net Weight 8.2g
Frequency 35MHz
No. of Channel 6ch
Modulate FM/PPM
Operating Voltage 4.8 - 6V DC
Operating Current 11mA
Max. Distance Range 1500M / 4900ft
Crystal Size HC-50
System Dual Conversion
Selectivity Better than 2.0?V
+8 kHz at 65 dBdown
Filtering Dual turned RF circuitry
Dual 4 pole ceramic filter
DSP filtering with mild algorithm
Shift Polarity Positive or Negative (auto?detect)
Intermediate Frequency 10.7MHz
IP3 +10dBm

Package Included
Corona RD620II 6ch 35MHz Dual Conversion Receiver x 1

New Arrival! TAMIYA 87028 Flat Model Paint Brush No.1

TAMIYA 87028 Flat Model Paint Brush No.1
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Features
TAMIYA 87028 Flat Model Paint Brush No.1
High quality, easy to use performance.
Made of fine horse hair from Chinese and American horses.
Off-white colored bristles.
This brush would better be used for painting larger areas.
Natural colored wood handle.
Burgundy imprint.

Specifications
Length: 8-1/4 inches
Bristle Width: 1/8 inches

Package Content
TAMIYA 87028 Flat Model Paint Brush No.1 x 1

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Large Bearings USD4.90 only
Silver Fox Helicopter USD27.90 only
Swanghobby 83mm 6-Blades Ducted Fan + 80A 5A BEC Electric Speed Controller USD39.90 only
Walkera HM-LA2-Z-08 Small Shaft USD3.10 only
2.4 Inch 16MB TFT Color LCD Digital Photo Frame USD21.00 only
CopterX CX450SE V2 Helicopter Kit USD92.90 only
Walkera HM-5#10-Z-30 Crystal Oscillator USD4.30 only
CopterX CX200 Helicopter Kit USD94.50 only
2 x RCS M2313 13g Metal Gear High Torque Micro Servo USD14.90 only
O.S.ENGINE MAX-37SZ-H Ring 2 Stroke Engine USD177.40 only
Walkera HM-4#3B-Z-04 Flybar Connector USD1.90 only
Walkera HM-4#3Q-Z-18 Tail Motor USD4.70 only
Swanghobby Medium Size Helicopter Heat Sink (370SD Motor) USD0.50 only
Walkera HM-LA2-Z-23 Receiver USD30.30 only
Flyermate Atlantis Series 2450Kv Brushless Motor + Hobbywing Seaking-90A Brushless Electric Speed Controller + Program Card USD100.90 only
2 x RCS 11.1v 1650mAh 20C LiPo Li-Polymer Battery USD34.90 only
Corona DS-919MG Digital Metal Gear Servos USD10.90 only
Silverlit X-Twin Mini Classic Radio Control Biplane USD30.30 only
Futaba FASST R604FS 4 Channel 2.4GHz 4PK Receiver USD132.30 only
Swanghobby 38 x 31 x 15 Boat Propeller USD4.70 only

Review on Tower pro 1530Kv 2410 Outrunner Brushless Motor

2009-08-23T19:23:00.000-07:00

Swanghobby.com reviews on Tower pro 1530Kv 2410 Outrunner Brushless Motor.

This has been a great little motor for my BLT park flyer.

I am still a novice pilot but I get upto 20 minutes flying time on a 900mah lipo with this motor, generally flying at half throttle. The plane weighs in at 450grams and I have ample of power for my needs. The photos show my setup.

you can buy this Tower pro 1530Kv 2410 Outrunner Brushless Motor at Remote Control Model Free Shipping Shop

Specification
Specification

- Dimension: 31mm x 41.5mm (bottom to shaft end)

- Max Current: 15A

- Speed Constant: 1530KV

- Working Voltage: 7.2-12.6V

- Shaft Extension: 31.2mm

- Weight: 54grams

- Recommended Propeller: 9*4.7GWSSF, 8*6GWSHD

- Shaft Diameter: 3mm Thread

Tamiya Products Blog

2009-08-13T20:30:00.001-07:00

A new blog talking about Tamiya products
http://japan-tamiya.blogspot.com/

Review on HOBBYWING Pentium 40A Electric Speed Controller

2009-08-12T21:50:00.000-07:00

Swanghobby.com reviews on HOBBYWING Pentium 40A Electric Speed Controller.

Would recomment this Speed Control to Anyone. Best to program also.

George

you can buy this HOBBYWING Pentium 40A Electric Speed Controller at Remote Control Model Free Shipping Shop

Specification
Specification

- Output: Continuous 40A, Burst 60A up to 10 seconds.

- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.

- BEC: 3A / 5V (Switch mode).

- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM (BLM: Brushless Motor)

- Product Size: 55 x 28 x 12mm

- Product Weight: 35g

Review on Swanghobby LCD 3 in 1 Battery Balancer

2009-08-12T21:45:00.000-07:00

Swanghobby.com reviews on Swanghobby LCD 3 in 1 Battery Balancer .

This product is very reliable and good for balancing the lipo batteria.

Tha price is right also. Best for the batteries

you can buy this Swanghobby LCD 3 in 1 Battery Balancer at Remote Control Model Free Shipping Shop

Specification

Feature

The Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can measure battery voltage precisely and balance cell voltage in battery pack, or discharging battery for long time shorage.
The balancer function can be executed before/after battery charged. It also can br done during battery charging process. It makes sure battery pack keeping in excellent condition.
User could observe all cell voltage in whole battery pack at once. It helps user to find out whick cell is abnormal during charging or discharging process.

Specification

Mode: Chacker/Balancer/Discharger
Battery Type: Li-Po/Li-Fe 2-6 cell, Receiver Battery 1.2V - 8.5V DC
Balance voltage setting range(lower limit): 2.0V - 4.2V (pre-setting value 3.3V)
Discharge voltage setting range(lower limit): 2.0V - 4.2V (pre-setting value 3.9V)
Dimension: 93.5 x 60 x 17mm
Weight: 70g

Download the detailed user manual here.

Review on Swanghobby 500V2 Helicopter Kit

2009-08-12T21:42:00.000-07:00

Swanghobby.com reviews on Swanghobby 500V2 Helicopter Kit.

muito bom, bem feito!!!! ainda nao comprei, mas um amigo comprou e esta muito feliz

you can buy this Swanghobby 500V2 Helicopter Kit at Remote Control Model Free Shipping Shop

Specification

Feature

- Electric power system

- Simple and light weight design provides awesome flight performance and extreme 3D capability

- Rigid carbon fiber frame design

- Beautiful factory painted fiberglass canopy

- Rotor head/tail with thrust bearings

- Direct-to-swash CCPM linkage

- Center of gravity of

Battery tray designed close to the rotor head

- Tail rotor drive belt system

- Fully driven tail auto rotation system

- Tail servo boom mount.

Specification

- Length: 850mm

- Height: 310mm

- Main Blade Length: 425mm

- Main Rotor Diameter: 970mm

- Tail Rotor Diameter: 200mm

- Motor Pinion Gear : 162T

-

Autorotation Tail Drive Gear: 145T

- Tail Drive Gear: 31T

- Drive Gear Ratio :1:13.5:4.68 / 1:12.46:4.68

- Net Weight: 935g

- Flying Weight: Approx 1700g

Package Content

- Swanghobby 500V2 Kit x 1

Review on O.S.ENGINE MAX-46AX 2 Stroke Engine

2009-08-12T21:28:00.000-07:00

Swanghobby.com reviews on O.S.ENGINE MAX-46AX 2 Stroke Engine.

I Installed the engine os 46 ax on my trainer, I noticed immediately the difference with the engine that was first . the engine os 46 ax is very high performance, powerful and fun reliable . I am very happy, because when I installed I had more power off as they had before with other engine . I am very happy with the purchase.

you can buy this O.S.ENGINE MAX-46AX 2 Stroke Engine at Remote Control Model Free Shipping Shop

Specification

Feature

- Redesigned remote needle holder is separate bracket, not part of backplate

- Advanced Bi-Metallic Liner. This process uses a double layer of plating material rather than one thick layer. This helps the metal to bond to the cylinder and is more durable. Also, the plating process is more consistent, resulting in a more precise fit between piston and sleeve for better compression, longer life

- Side exhaust

- Newly designed sport muffler with squared-off shape

- 40G Carburetor

- Ball bearing-supported Crankshaft

Specification

- Displacement: 7.45cc

- Bore: 22mm

- Stroke: 19.6mm

- Practical RPM: 2000-17000

- Power Output: 1.65ps/16000 RPM

- Recommended Propellers: 10.5x6, 11x6-8, 12x6-7, use 10x6 for break-in

- Crankshaft Size: 1/4-28

- Distance from remote needle to end of crankshaft: 119.4mm

- Distance from center of engine to drive hub: 61mm

- Distance from center of engine to end of crankshaft: 87.6mm

- Distance/crankshaft center to muffler exhaust outlet: 100.5mm

- Height from crankcase bottom to top of cylinder head: 85.2mm

- Height/crankshaft center to top of cylinder head: 67.4mm

- Width including mounting ears: 50.8mm

- Width not including mounting ears: 35.6mm

- Width between mounting holes same side: 17.5mm

- Width between mounting holes opposite side: 44mm

- Diameter of muffler body: 38.1mm

- Angle of muffler in relation to engine: 4°

- Weight: 375g without muffler

- Weight: 489g with muffler

Remote Control Model Review Blog

Is 1/10 Hobbywing Xerun approved by ROAR

The Official Fly Sky FS-GT3B thread

PAINTING & DECORATION OF R/C CAR BODIES

R/C SAILING GUIDE

Hobbywing Skywalker esc

SH Engine

Products

Hobbywing XERun-120A ESC and Tacon 4300kv

LEOPARD

Fly Sky FS-TH9X 9 Channel Transmitter

Syma S107G 3Ch coaxial micro heli with gyro Review

Fly Sky FS-GT3B 2.4Ghz radio reviewed

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter + Receiver available at Hobbyhot.com

RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)

New Arrival! HobbyHot Beep Beep Finder for RC Airplane / Helicopter

新裝修 - 馬鞍山 新港城

新裝修 - 馬鞍山 新港城

New Arrival! Hobbywing 0.25A Cooling Fan for Car ESC

Corona RP8D1 8ch 72MHz Dual Conversion Receiver for Futaba JR SANWA

Review on Tower pro 1530Kv 2410 Outrunner Brushless Motor

Tamiya Products Blog

Review on HOBBYWING Pentium 40A Electric Speed Controller

Review on Swanghobby LCD 3 in 1 Battery Balancer

Review on Swanghobby 500V2 Helicopter Kit

Review on O.S.ENGINE MAX-46AX 2 Stroke Engine

新裝修 - 馬鞍山新港城

新裝修 - 馬鞍山新港城