Replacing Your Old Tub With A New One

In addition to the cost of your new bathtub, you are also going to have to pay to get a lot of work done so your bathroom looks good and functions well again! Expect this solution to cost a lot more than just the price of a new bathtub!

Of course, now you have another problem. Does the new tub match the sink and other fixtures? Are you going to have to replace everything to get the look you want?

Here’s the other good thing about resurfacing. You have an opportunity to change the color of your tub. If you want a shower area or sink to match, it is easy enough to get the technicians to handle the entire job.

Bath tub resurface can even erase the effects of mold and stains. Anybody who has seen your old and new tub will think you purchase a new one, but only you know the truth!

It is probably a lot more sensible to resurface your old tub, shower, and sink than to consider replacing them. You only need technicians to do the resurfacing. You do not need people to remove your old tub, install a new one, deal with plumbing, and then fix your tiles.

Bath tub resurface is fairly inexpensive, allows you to choose new colors, and should be guaranteed to last for many years. It can be a lot of fun to choose an entirely new look for your old tub, and it should save you money.

Resurfacing a tub is really simple to do. With patience and a number of preparations, you may have the ability to create your old bath looking like new. Here are step by step procedures and the easy groundwork you have to recall when you’re going to resurface a bath.

The first thing you’ve got to contemplate is that you are going to work with different types of substances. The substances included in bathtub resurfacing can be dangerous to you. So, it’s significant not to forget that you’ve got to shield yourself in order for you to prevent any serious harms. It’s essential you need to work in well-ventilated areas the fumes that a few of these compounds emit can be dangerous if inhaled and are poisonous. The fumes and the compounds may also be bad for the skin and the eyes.

Now that you’re well-shielded, the next measure is by giving your bath a preliminary cleaning. It’s essential you need to remove the gaskets along with any caulking that is not tight. There are bath refinishing kits that contain compounds that are several which you want for refinishing and efficiently cleaning your bath.

As a cleaning solution, the first two compounds will essentially remove oils and soaps from the bath surface. Additionally, they’re going to get your bath ready for the primer.

Your next step will be to use the second compound as a cleaning solution to remove any oil and soap deposits. Rinse it completely with water, and using paper towels or an old towel, dry your bath.

You are nearly prepared for the period that is resurfacing. Nevertheless, you will have to use tape and paper to the places you do not need to resurface. This will shield those places from being damaged by the substances you’re using.

Now you’re prepared to use the base coat. A useful hint would be to use a respirator. The fumes are poisonous, so be safe.

After about 30 minutes now you can use the topcoat. In addition, you have to use the spray gun correctly by using it with strokes to be able to have a great looking finish.

As it is possible to see, tub resurfacing can be very easy. It’s an affordable option than buying a brand new tub. By resurfacing your tub, you may have the ability to have a brand-new looking tub at an extremely affordable price.

When you replace tiles, you do just that: you remove the tiles, scrape the surface to make it even, and then glue a new set of tiles. On the other hand, when you resurface a tile, you simply glaze over the tile to make it look brand new.

Thus, unless if you’d like to impress someone with new tiling, ceramic tile resurfacing is better. The good thing about tile resurfacing is that it only takes three to five hours to complete, and you can use your bathroom again on the same day.

So how does ceramic tile resurfacing work? There are many professionals who do tile resurfacing but almost all use the same process of cleaning the surface for any dirt, debris, and other deposits using a special abrasive. Any damage or missing caulking is fixed. Then after that, the coating magic happens. If you’re worried about the fumes, a professional exhaust system will capture spray and solvents.

Since almost tile resurface companies operate locally, if you plan on having work done to your tiles, you can search for these companies in your local Yellow Pages. If that doesn’t work, just Google “tile resurfacing” plus the name of your area.

If you’re able to choose a good company that does a very good job, you can expect your tile surface to be stronger and easier to clean. If you’re wondering how much it would cost you, just ask for a quote.

As with anything else, you can save money by asking for a quote from at least three companies. If you are remodeling your entire house, you can make it part of the job.

In conclusion, we think that ceramic tile resurfacing is definitely a better option especially if we’re just talking about hairline cracks here, molded surfaces, etc. There might be times, however, when a total replacement of your tiles is in order, like when almost all the tiles are hopelessly cracked. Ask your contractor what would be better for your surface.

Aside from tiles, you can also refinish bathtubs and countertops. Although a new bathtub is inexpensive at $300 or so, the cost of installing the new bathtub and removing the old one (plus other incidental costs like plumbing alterations) can skyrocket your costs to thousands of dollars. Resurfacing your bathtub, however, will only set you back by a few hundred dollars.

Refinishing of a countertop involves putting on new laminate over the existing surface. Fortunately, most countertops come in standard sizes, and laminate material for the refinishing will easily be available, thus reducing any wastage. However, if your countertop is not a standard size, some wastage may be unavoidable and will slightly increase your cost. Fortunately, such laminates can always be used for other small projects in a home, and do not really get wasted.

Preparation of the countertop is one very important prerequisite for any countertop refinishing. You need to strip the earlier laminate and the glue that held it down. Most improvement stores will carry chemical solutions that will enable this task to be completed quite easily. The removal of laminate is made easier if you use a hot iron on its surface, as this will cause the laminate to expand and detach itself from the surface. You can then use a chisel to make cuts on the old laminate and allow you to literally peel it away. Once this is done, use the chemical solutions to ensure that you remove all vestiges of the earlier glue. You then need to use a sander on the exposed wood so that surface gets prepared for allowing the new laminate to adhere to the surface.

Make sure that you have the right glue for the bonding of the new laminate to your prepared surface of the countertop. Spread the glue evenly and thinly on the surface. Use a glue spreader to ensure that glue is spread properly and extends to the edges of the countertop base. Put on the laminate carefully and roll it with a heavy roller to ensure that are no air bubbles and the laminate adheres completely to the surface. Some glue will seep out of the edges and may need to be cleaned off. Give it some time, preferably a day or two, to set and your new refinished countertop is ready for use.

There might be some serious concern when it comes to our bathroom for this one reason. Our guests tend to judge us by it. If we have a dirty or untidy bathroom our guests just think we are plain messy. Why let them judge you? Make sure your bathtub does not stain and that all the cracks are covered up with a proper reglazing.

When you’re showing your home to possible buyers you know you need it to look its best. The goal of making a home appealing to someone who is looking to buy is to cover up all the cracks and damage that the last person who lived there left. A great way to make your bathtub look like new again is to have a proper reglazing done.

I know you need to find the right company when you want to have something like this done. There are a lot of great options for those of us looking for the perfect team of reglazers to find them. All you need is an internet connection. Have you heard of the site Angie’s list? This is a perfect way to get real reviews on the professionals that you are looking to hire. This way it won’t be a guessing game when it comes to the quality. You will just know that you are hiring the best team in the area.

I know a lot of us have little ones that enjoy bath time. The truth about these youngsters is that they are often afraid of things that we would have no idea of. Yes it is true, a toddler really does have quite a vivid imagination. Is there a crack in your bathtub? Well, a little ones imagination can run wild with that. I’m sure you want to get it fixed so he won’t think that he’s going to fall through. Bath time should be an enjoyable experience and I know that you want to promote good bathing habits. If you are looking to do this you need to make sure that your bath tub doesn’t look creepy. I think you would be surprised at how some children perceive things.

Why not do the one thing that’s going to make your bathroom look great? I know your guest will thank you and so will your kids. But more importantly, you will have a cleaner, better-looking bathroom to enjoy. Won’t that help you relax in this difficult world?

The type of bathtub needing the reglazing dictates the type of work needed to be done. Not every company that promises to reglaze bathtubs is qualified, licensed, or experienced to do the job properly. Do not hire a company that is not experienced in the specific area of refinishing bathtubs.

It helps to understand the basics of reglazing prior to choosing the right refinishing company. Reglazing a bathtub is also called refinishing or restoring a bathtub. A bathtub essentially cannot be completely reglazed since glazing is a process done to porcelain at a very high temperature of over 2,000 degrees. For the purposes of redoing a bathtub’s finish, reglazing refers to restoring that bathtub to its original appearance.

You will know when it is time to hire a refinishing company as you will be unable to clean the bathtub properly. Stains no longer come off, and there may be chips that have developed over time, giving the bathtub an unsightly and worn appearance. Bathtub refinishing is an ideal process for changing a bathtub’s color from one that is outdated to one that is more fresh and modern.

Once a bathtub undergoes the cleaning process, any chips or scratches are then filled in and smoothed over. Finally, the refinishing professionals apply an acrylic-based topcoat to the bathtub. The result is a bathtub that looks brand new but cost much less than the purchase of a brand new bathtub itself would cost.

The entire process of refinishing a bathtub must be done by an experienced, qualified refinishing company. The way to ensure you hire the right company is to make certain you are looking only at companies that have an established presence in your area. Check to see what other customers have to say about their services, but more it is even more important to be sure the company is properly licensed and insured in your state.

Many refinishing companies offer free estimates for the work that you need done. Be sure to get an estimate in writing, and also check with the company’s you are looking to hire to be sure they offer a written warranty of their work so you get to enjoy a brand new bathtub without the brand new bathtub price.

Costs Associated With Resurfacing Bathtub

It is not easy to replace an entire bathtub because of budgetary reasons. It is easier to go with a solution that is essentially done to “cover-up” the issues at hand. Over time, the bathtub’s surface will start to crack underuse and this leads to the homeowner requiring an immediate solution before it worsens. One of the most sought after options comes in the form of resurfacing one’s bathtub. Yet, most homeowners do not understand the costs associated with this home renovation project. Let’s take a look at the costs associated with resurfacing one’s bathtub.

The last thing one wants is to not only waste money but to worsen the situation at hand. It is easier to go with a professional service that has proven experience when it comes to handling such projects.

They are able to provide a quote and make sure the bathtub looks as desired for the homeowner. It is essential to understand the intricacies of the project before delving into the costs. The professional will always look to provide the details to the homeowner in order for them to understand what is required.

There are a series of steps involved with preparing the bathtub in order to get the required results. One of the steps that can differentiate between good services and horrible ones is in the preparation of the bathtub. It is essential for the bathtub to be prepared as desired before moving further into the project.

The quality is what can lead to great results and/or bad results. It is important to find a balance. The finishing touches are essential in this day and age because no one wants to continually call back for maintenance jobs in regards to chips and cracks.

Now, to the main aspect of the article. The costs are what most homeowners are worried about with any home renovation service. Is it worth going to a resurfacing service or simply replacing the bathtub itself?

Most costs can vary and it is not as simple as pinpointing one price across the board. Each service has a range of factors involved in their assessment of the bathtub. Most services hover around the $550 mark, but some can be less, while others can be more.

It is best to ask for a quote from a number of different services before moving forward with the project at hand. This makes sure the best price possible is being offered.

An alternative will be to resort to ceramic tile refinishing that can be easy on the budget, and also save you the inconveniences that come with any replacement. Ceramic tiles, especially in bathrooms become dull because of the dirt and other environmental factors that are ever-present in their usage and are also affected by smoke and may at times attract mold. Regular cleaning can help extend the life of the tiles, but it is the grout between the tiles that first starts showing signs of distress and overuse. Regular household cleaners that help you to make floors and walls with ceramic tiles gleam once again also leave their deleterious effect on the tile and grout and can cause them to completely degrade. The use of homemade cleaners can help to reduce this damage and they are easily made with common household items like vinegar and baking soda.

When you decide that the cleaning and other efforts are still not giving you the desired looks to your walls and floors you can consider the alternative of ceramic tile refinishing. It is a detailed and fairly involved process that requires careful implementation that will enable the tile to get back most of its earlier finished look. The first step is obviously to completely remove all the accumulated dirt and debris from the surfaces to be treated. This can at times involve scraping and the use of industrial-grade cleaners that will completely remove the soap scum, remnants of lotions, and other contaminants. Once this is done, the surface is mildly etched with a light acid so that the surface attains a degree of porosity. It is necessary to examine the surface for any damage caused by the cleaners before this etching step is undertaken. The surface is then allowed to dry and the perimeter of the tile surface masked so that surrounding surfaces will remain protected during the ceramic tile refinishing operations. The etching acid then needs to be neutralized before any further operations are undertaken.

The finishing coat that is applied on the tile surfaces is normally sprayed on and this makes it necessary to have space properly ventilated to extract the fumes from such spraying. A chemical bonding agent is first applied to the tiles and this helps the finishing layer to create a permanent molecular bond, which prevents moisture from getting in between the original glazed surface and the new glazed application. The final acrylic coat that contains solids is sprayed on by technicians who do need to use the proper safety equipment like respirators, gloves, protective clothing, and eye protection. This completes the process and leaves you with ceramic tile surfaces` that is as good as the original baked finishes.

Resurfacing is a method that involves repairs or changes to the laminate that is showing signs of distress. It is a process that can be far cheaper, than replacing the entire countertop. The economy comes from the fact, that the supporting structure, which is a major cost in countertops, remains the same. Countertop resurfacing can make a countertop look as if it is new. Most countertops are made of laminates and other such thin materials. It is quite easy to go through the process of resurfacing the countertop even on your own, and this will result in your saving even more money. It is when the countertop is made of a thicker material like some form of stone or granite (the commonest) that you may need to bring in a professional for the resurfacing work.

When you want to resurface a countertop that has laminate, you can remove the old laminate by stripping it and removing the glue with a stripper. The surface then needs to be properly sanded down until the entire surface is clean. A new laminate can then be installed. This needs to blend with the rest of the room. The laminate must be flattened with a roller so that are no bumps or unevenness. Alternatively, you can create a rough surface on the old laminate and bond the new laminate over it.

Believe it or not, people judge you on the quality of your home. They will look at things like your wood and your tile, but more importantly, they will judge the surfaces that are in your home like your kitchen counter-top. If you are looking for that judgment to be a positive one then you might want to consider getting your counter-tops resurfaced every once in a while.

If you have wood counter-tops this is a great idea. I know how much we all hate splinters. This can really become a hazard when we are trying to bake without getting blood in the food. So please, if you have wood counter-tops have them resurface regularly.

I know you want to find the right professionals for the job and who better can you trust than your friends? Why not ask your friends if they have ever needed this sort of work done and who they used? This is the perfect way to get quality work done without putting too much effort into finding someone for the job.

If this isn’t what you want to do then you might want to try looking at Angie’s list. All the contractors in your area will be listed here. The best part about this site is that everyone on it has reviews written by people just like you! That’s right! There are no third party members on this site, only ex and current customers can write reviews for contractors.

Don’t you deserve resurfaced counter-tops? You need to imagine how happy it will make you and just go with it. There really isn’t a better way to make your house inviting and comfortable than having beautiful counter-tops. Why not have them resurfaced today? I know you won’t regret it once you see how amazing they look.