Sabi96 Papercraft Box

Boomerang Mario

2012-03-09T22:23:00.005+01:00

Boomerang Mario is a transformation introduced in the Nintendo 3DS title Super Mario 3D Land. It is based on the Boomerang Bro., making it similar to Hammer Mario, which is based on the Hammer Bro.. Mario becomes Boomerang Mario after obtaining a Boomerang Flower. With the Boomerang suit, Mario can throw one boomerang at a time to defeat enemies, destroy projectiles, and collect items from a distance. Mario can also jump to dodge the boomerang to allow it to move back and forth continuously before collecting it.

About the Model:
Height: 11.8cm
Width: 16.6cm
Depth: 11.3cm
Number of Pages: 2
Number of Parts: 6
Difficulty: 5/10
Download A4 Only

Instructions: Follow the instructions found on the pdo and pdf.

Notes: This model is a participant for the Nintendo Papercraft 2 Page Contest. Please come by to vote (you have to be registered)

Weezing

2012-02-26T13:25:00.002+01:00

Weezing mostly look like two Koffing stuck together, albeit both being a lighter shade of purple than an actual Koffing, with one being larger than the other is. The larger head sports the skull-and-crossbones design featured on its pre-evolution, while the smaller head only has a light yellow circle underneath the face. It also has a third chamber on its underside, presumably for storing extra toxins, which resembles a tiny version of a Weezing head, minus the face and skull-and-crossbones pattern. Two small appendages connect this extra chamber to the heads. The larger head has prominent eyebrows, pointed teeth protruding from its lower jaw, and flatter teeth on its upper jaw, while the smaller head simply has two pointed teeth, one at each corner of the mouth. Triplet Weezing have been discovered, although they are extremely rare. It evolves from Koffing starting at level 35.

About the Model:
Height: 11.8cm (A4), Letter 10% smaller
Width: 16.6cm (A4), Letter 10% smaller
Depth: 11.3cm (A4), Letter 10% smaller
Number of Pages: 4
Number of Parts: 25
Difficulty: 4/10
Download A4 / Letter

Instructions: Start the Model with the top of the big head, and down. Add the smaller head as soon as you've finished the hole in the big head. After connecting the two heads, close them by addin't the big head's bottom. Finish the model by adding the teeth and the third head (?)

Notes: You are going to have to improvise on the position of the teeth and third head

Emboar

2012-02-09T00:01:00.000+01:00

Emboar is an enormous, bulky, boar-like Fire-type Pokémon. It has short legs, a small tail ending in a tuft of hair and a small dome shaped head with no neck. Its egg shaped torso makes up most of its body. It has two powerful arms, which grow wider towards its fists with tufts of fur on the elbows. Constantly burning flames wreath the front of its neck and shoulders resembling a traditional Chinese center-parted beard. It has a red pig-like nose and large bushy black eyebrows that sweep up at the sides like horns or ears. Two tusks protrude from its lower jaw, jutting out at the corners of its wide mouth. Its forearms begin orange in coloration, with the coloration of the upper and lower arms separated by gold-colored bands. The lower arms and elbows are black, the wrists have bands of dark red coloration, and the hands are tipped with three claws. A large, dark horizontal stripe on the chest of Emboar sports swirled yellow features, and its legs and lower underside are red, although its feet are black-colored, rimmed in a spiky manner with gold, and ending in two-toed claws. It evolves from Pignite starting at level 36. It is the final form of Tepig.

About the Model:
Height: 21.9cm (A4), Letter 10% smaller
Width: 21.9cm (A4), Letter 10% smaller
Depth: 23cm (A4), Letter 10% smaller
Number of Pages: 8
Number of Parts: 83
Difficulty: 8/10
Download A4 / Letter

Instructions : Start by building the eyebrows. After that build the top of the head, and add the eyebrows to them. build the rest of the head, and as soon as you finish the head, add the teeth. The flame is pretty complicated, and pretty confusing, so be pretty careful with it. After adding the flame, add the arms,and the rest should be pretty easy. Add the tail before adding the legs, and finish the model with one of the feet.

Notes : The flame has a few small parts, but is buildable (reference the pictures). The model itself is pretty stable for it's two small feet.

Serperior

2012-02-07T01:00:00.002+01:00

Serperior is a primarily pale-green, snake-like Pokémon. Serperior has curled pale-green patterns on the sides of its face and snout, and small, pointed yellow extensions on the back of their heads. Its face and upper neck are white-colored, and curled, tendril-like darker green extensions spread out from the sides of its lower neck, forming a curling pattern lower down the body, resembling a fancy collar. It has narrow red eyes, and small, pointed teeth on its lower jaw. The upper section of its body is dark green, and the lower pale green. Curled yellow patterns adorn its body, and a sprig-like feature of several leaves tip its tail. It has lost its legs completely, and now only has small, stubby hands. It evolves from Servine starting at level 36. It is the final form of Snivy.

About the Model:
Height: 19.9cm (A4), Letter 10% smaller
Width: 23.8cm (A4), Letter 10% smaller
Depth: 23.2cm (A4), Letter 10% smaller
Number of Pages: 4
Number of Parts: 39
Difficulty: 4/10
Download A4 / Letter

Instructions: Pretty straightforward model, start at the nose, add the ''ears'' as soon as possible, neck, ''wings'' and continue with the body. Finish the model by adding the tail leaves and arms.

Notes: My old Serperior is available in the A4 pack only. I will post Emboar on February 9th.

Samurott

2012-02-05T13:34:00.001+01:00

Samurott is a quadruped, blue sea lion-like Pokémon. Long, white whiskers extend from its snout and head, and on the back of its head is a large, rounded beige helmet-like shell with spikes and a spear-like, pointed protrusion in the front. Its underbelly is covered by a dull bluish gray seashell-like carapace, and its limbs are covered with beige, sectioned bracer-like coverings, looking as if comprised of seashells with the forelimbs’ bracers being the swords called ashigatana that it uses in battle. The lower two segments of these bracers are the scabbards for the two swords. The upper segment and spike make up the ashigatana and its handle, respectively. Samurott possess three navy digits on each limb, and a fin-like, splayed tail with the innermost section being beige like the seashell-like portions of its body. It evolves from Dewott starting at level 36. It is the final form of Oshawott.

About the Model:
Height: 16.9cm (A4), Letter 10% smaller
Width: 30cm (A4), Letter 10% smaller
Depth: 15cm (A4), Letter 10% smaller
Number of Pages:5
Number of Parts: 101
Difficulty: 6/10
Download A4 / Letter

Instructions: Build starting from the head, first part being the nose. Simultaneously build the head and the shell. Add the mustache as soon as possible. After the neck, build the body so that it forms 4 loops for the legs, but leave the part with the tail hole open. Build the legs starting from the nails, and upwards, adding the shells in progress. Finish the model with the tail.

Notes: My old samurott is included in the A4 pack only. I will post Serperior on February 7th, and Emboar on February 9th

Volleyball Peach

2012-01-10T22:25:00.003+01:00

Princess Peach Toadstool (Japanese: ピーチ姫, Pīchi-hime) is the princess of the Mushroom Kingdom. Peach first appeared in Super Mario Bros.. She was created by Shigeru Miyamoto to be the damsel-in-distress throughout most Mario games. She resides in her castle along with many Toads. Her kingdom is often attacked by the Koopa Troop, led by Bowser.

About the Model:

Height:50cm

Width: 17.9cm

Depth: 33.3cm

Number of Pages: 16 (including ball)

Number of Parts: 115

Difficulty: 8/10

Download A4 / Letter

Instructions : N/A

Notes : Build this with thick paper, because the model is too large for regular printing paper.

Victini

2012-01-02T12:21:00.008+01:00

Victini is a small, rodent-like Pokémon. Its large, pointed ears are shaped like the letter V, possibly in reference to its name or the generation it was introduced in. Victini's eyes are large for the size of its head, and are blue. Its round head is comparatively large for its small body, and cream-colored, while the tops of its ears, crest, and extremities are all orange. Its bulbous arms and legs are rounded to make a sort of "cuff" before ending with small, three-fingered hands and two-toed feet. Victini's two winglike tails grant it the ability to fly.

About the Model:

Height: 20cm

Width: 10.8cm

Depth: 13.89cm

Number of Pages: 3

Number of Parts: 3

Difficulty: 4/10

Download A4 / Letter

Instructions: Start at the V, and add the back hair soon after, start the head by adding the parts connecting to the ears. Finish the whole body before adding it to the head. Finish the model by adding the wings, hands and feet.

Happy New Year (again)

Cubchoo

2011-12-31T11:23:00.002+01:00

Cubchoo is an ursine Pokémon with a light blue head and neck. It has a slightly pointed head, with large round ears, shiny, dark, oval-shaped eyes, and a darker-blue muzzle. Cubchoo has a shiny dark nose, from which a considerable amount of light blue nasal mucus, the source of its attacks, droops. The lower part of its body is white, with rounded forepaws, digit-less feet with black paw-pads, and a small round tail. It evolves into Beartic at level 37.

About the model:

Height: 10cm

Width: 9.3

Depth: 7.8cm

Number of Pages: 2

Number of Parts: 25

Difficulty: 3/10

Download A4 / Letter

Instructions : Start at the top of the head, add the ears, snout, snot. start the top of the body, add the arms, legs, tail and finish with the butt.

Tanooki Mario

2011-12-25T23:33:00.004+01:00

Tanooki Mario is a form of Mario or Luigi first appearing in Super Mario Bros. 3. The Mario Bros. use a Tanooki costume with a tail, that allow them to fly or attack spinning.

About the model:

Height: 30cm (A4) , 28cm (Letter)

Width: 16cm (A4) , 15cm (Letter)

Depth: 20.4cm (A4) , 19.1cm (Letter)

Number of Pages: 11

Number of Parts: 67

Difficulty: 5/10

Download A4 / Letter

Instructions: Start at the nose, and finish the face. Work you way up from the forehead, adding the ears in the process. Then finish the head by building the rest of the cap. The rest of the model is pretty straightforward. Add The arms to the first part of the body. The arms might be a bit difficult. The legs are easy, and adding them to the body is simple as well. Finish the model by adding the tail to the body.

MERRY CHRISTMAS!!

Baby Peach

2011-12-24T16:51:00.004+01:00

Baby Peach is a minor character in the Mario series series designed to be the infant counterpart of Princess Peach. Since then, she has become a recurring character in spinoff installments alongside Baby Daisy, much like Baby Mario and Baby Luigi did before them.

About the model:

Height: 18.5cm

Width: 9.9cm

Depth: 13.0cm

Number of Pages: 5

Number of Parts: 45

Difficulty: 6/10

Download A4 / Letter

Instructions: start at either shoe, and work your way up. Add the "shorts" as soon as you finish the legs. Add the skirt after you finish the part it should be on. Add the Hands before adding the head. Finish the model by adding the pacifier and the crown to Baby Peach's Head.

Notes : This model was testbuilt by Squeezycheesecake. I hope you had fun building it

MERRY CHRISTMAS AND HAPPY NEW YEAR!

Classic Sonic

2011-11-04T18:48:00.006+01:00

Sonic the Hedgehog is the main protagonist of the series and is SEGA's mascot. He is a supersonic, blue, teenage hedgehog. He can move faster than the speed of sound (768 mph, which is faster than Mach 1), with lightning reflexes to match (hence the name Sonic). He is a laid-back and cool character. He is meant to symbolize peace. He is 15 years old, stands at 100 centimeters, weighs 35 kilograms and was born on Christmas Island. Artist Naoto Ōshima, designer Hirokazu Yasuhara and programmer Yuji Naka are generally credited with the creation of the character, a blue and-peach-skinned, green-eyed, anthropomorphic hedgehog, who has the ability to move faster than the speed of sound and possesses the ability to curl up into a ball (like a regular hedgehog), primarily to attack enemies. This is a major part of the gameplay of the series. According to an offical poll, Sonic is the most popular character in the series.

About the Model:

By Sabi96

Height: 25cm

Width: 16.2cm

Depth: 11.6cm

Number of Pages: 6

Number of Parts: 43

Difficulty: 6/10

Download A4 / Letter

Instructions: n/a

Notes: This model is also available on the paperplaza

Halloween Special Pt.2 - Kayako Saeki v2

2011-10-31T22:45:00.004+01:00

About the model:
Height: 47.3cm
Width: 18.4cm
Depth: 11.5cm
Number of Pages: 13
Number of Parts: 97
Difficulty: 7/10
Download A4 / Letter

Instructions: Start at the tip of the head, work your way down to the mouth. After the mouth glue the hair on one by one, and after the hair finish the head. Glue the arms on as you work your way down. Finish the upper body with the skirt. The feet are pretty straightforward. After finishing the legs and feet glue it to the upper body the way you want it, or the way that she could stand.

Notes: Hands are small, but buildable. This model is also available on the Paperplaza

Halloween Special Pt.1 - Mismagius

2011-10-31T11:23:00.003+01:00

Mismagius is a purple ghost-like Pokémon that has the appearance of wearing a cloak. The three red spheres of Mismagius's necklace have a slightly elliptical shape to them, and its neck appears somewhat long and crooked. It has a round head and a large, elaborate, tufted feature atop it, the extremities of the tufts being a lighter color than most of the body. This feature resembles a witch's hat in shape. Mismagius has a skinny, red mouth that resembles a "W." There are extensions on the sides of Mismagius's lower body, the foremost ones looking more ragged in appearance than the ones in the back, that give Mismagius the appearance of wearing some kind of cloak. It evolves from Misdreavus when exposed to a Dusk Stone.

About the Model:
Height: 25cm
Width: 12.5cm
Depth: 11.6cm
Number of Pages: 6
Number of Parts: 51
Difficulty: 5/10

Download A4 / Letter

Instructions: Start at the tip of the hat, and work your way down to the face, adding the spikes in the meantime, Build the body, and after finishing the body, add the arms (?). Finish the model by adding the three gems onto the body

Notes: This was testbuilt by Odnamra22. Thanks for building, and i hope you had fun. This model is also available on the Paperplaza

Lillipup

2011-10-25T21:48:00.004+02:00

Lillipup is a tan-colored, dog-like Pokémon. It has large eyes and a red nose, with its face covered by an abundance of cream fur. Its large ears have spiky lower extensions. Its fur puffs about above its paws, and its back has a spiky black stripe. Its tail is spiky and shaped similarly to Lillipup's ears. It evolves into Herdier starting at level 16, which evolves into Stoutland starting at level 32.

About the model:
Height: 15cm
Width: 13cm
Depth: 11.6cm
Number of Pages: 4
Number of Parts: 48
Difficulty: 4/10
Download A4 / Letter

Instructions: Start from the nose, then the face, then the ears. Add the back of the head. Glue on the body, and later the feet one by one. Finish with the tail and the back fur.

Notes: This model is also available on the Paperplaza

Arceus

2011-10-20T10:20:00.003+02:00

Here's the highlight of this year's anniversary, the heavily requested Arceus!

Arceus is an equine being similar to a Qilin or Centaur. Its body color is white with a gray, vertically-striated underside, the pattern of which has similar recurrences on the underside of Arceus's mane, tail, and face, and Arceus's four pointed feet are tipped with gold hooves. Its mane is quite long, jutting away from its head, and its face is gray, with green eyes and red pupils, and a green circular pattern below its eyes. Arceus also has a streak of gold coloration on its head, and ears that point upward. Its neck is fairly long, with two pairs of extrusions to the sides, and a flap-like feature on the neck's underside that is colored white like much of the body. It also has a golden cross-like wheel attached to its body by its round abdomen, which changes color along with its eyes and hooves based on Arceus's current type. The wheel also has four jewels attached to it. The pattern of striated gray of Arceus's underbelly resumes past Arceus's waist, the underside of Arceus's limbs also being gray in coloration, and with extrusions at the tops of the legs. Arceus's tail is fairly like its mane in shape and coloration.

About the Model:
Height:30cm
Width: 19.2cm
Depth: 26.7cm
Number of Pages: 13
Number of Parts: 113 (A4), 114 (Letter)
Difficulty: 8/10
Download A4 / Letter

Instructions : Start at the tip of the head horn. Work your way to the head. Finish the head by adding the face. Body is pretty easy. Add the to front legs as soon as possible, and follow by adding the stomach. The ring is very difficult. Start the ring in the middle, from the 5 parts that make the base. Then glue the 8 parts around it. Make the edges, but do not connect the two sides.There are 4 parts on each side that connects the 2 sides. Glue them on 1 by 1 to finish the ring. After the ring just make the hind legs, and glue the body between them. Close the model with the tail.

Notes: Textures are changeable only in the pdo. If i made a pdf for every shiny type lined and lineless, the packs would be 150mb each. Pdf contain the regular arceus with shiny textures and Lined and Lineless textures. This model is also available on the Paperplaza.

Koopa Troopa (Mario Galaxy)

2011-10-15T14:15:00.002+02:00

Koopa Troopas are common enemies in the Mario series, usually displayed as foot soldiers of the Koopa Troop, under the direct leadership of Bowser. Since Super Mario 64, however, many Koopas have appeared who do not work for Bowser (or any other villain), some of whom even act as allies to Mario during his adventures. Koopa Troopas are turtle-like creatures with shells that come in many different colors, with red and green Koopa Troopas being the most common. Koopas, along with Goombas, are some of Mario's most common foes.

About the model:
Height: 14cm
Width: 11.4cm
Depth: 18.3cm
Number of Pages: 5
Number of Parts: 22
Difficulty: 5/10
Download A4 / Letter

Instructions : Start at the eyes, work your way down the head. When you finished the head, start building the shell, the top part. finish the shell with the belly. Add the tail to the shell, and finish the model with one of the legs

Notes: This model is also available on the Paperplaza

Woobat

2011-10-10T08:25:00.004+02:00

Woobat is a blue, shaggy creature, resembling the head of a fruit bat. It has a piggish, large nose with a nostril in the shape of a heart. Its eyes are hidden behind two shaggy tufts of fur. It has a large mouth with a single fang, and two relatively small wings on either side of it. It evolves into Swoobat when leveled up with high happiness.

About the model:
Height: 12cm
Width: 17.6cm
Depth: 15.2cm
Number of Pages: 3
Number of Parts: 21
Difficulty: 3/10
Download A4 / Letter

Instructions: Start at the nose, build the front, add the mouth, and finish the front with the spikes. Spikes are fairly easy. start the hind by adding the back spike parts to the front. Finish the body with the last body part on page 3. Finish the model by adding the wings.

Notes: This model is also available on the Paperplaza

Scraggy

2011-10-05T08:38:00.003+02:00

Scraggy is a bipedal lizard-like Pokémon. Its oval-shaped eyes are set to the sides of its head, and its teeth are like those of Croagunk. It sports a small red scale on its yellow head. Below the yellow portion of its head, its body is cream-colored, with thin arms and a red, scaled belly. It carries its yellow, molted skin around its legs, making them resemble trowsers, although some of the skin seems to trail off to form or cover a tail. It evolves into Scrafty starting at level 39.

About the model :
Height: 13cm
Width: 9.6cm
Depth: 6.5cm
Difficulty: 4/10
Number of Pages: 3
Number of Parts: 36
Download A4 / Letter

Instructions: Start at the top of the head, work your way down. Glue the hands on ASAP. Before finishing the model, close with the legs (not the tail) and the hair .

Notes: This model is also available on the Paperplaza. The model has been scaled up from the picture.

Anniversary! - Mini Unova Starters

2011-10-01T07:48:00.002+02:00

Hello! It's October, so it means that it's this blog's anniversary! Can you believe it was a year past since my first oshawott? I know i still got a lot of work to do to become better, but i'm sure i'm on my way. In order of the anniversary's 1st day, i present three little crafts, one set, The Mini Unova Starters. All are about 8cm tall, Snivy have to have curved legs to stand, and Tepig's tail is 2d to make it easy and buildable.
Thanks for sticking with me for one whole year.

Download Unova Minis - A4

Notes: Tepig's height is fixed in the release, so it's not that short. I may make a stand in the future. These models are also available on the Paperplaza

Dwebble

2011-09-30T06:36:00.002+02:00

Dwebbles resemble an orange hermit crab, with large pincers and dark, oval-shaped eyes supported by eye stalks. It has a hook-like tail that is concealed underneath the sectioned chunk of gray rock it uses as a shell. This tail is possibly used to keep the rock in place or to carve itself a new home should its old rock get lost. It evolves into Crustle starting at level 34

About the model:
Height: 11.9cm
Width: 11.9cm
Depth: 16.4cm
Difficulty: 4/10
Number of Pages: 5
Number of Pieces: 31
Download A4 / Letter

Intructions: You can either build the rock first, beginning at the top, and gluing the inside in. Or you could start with he eyes and work you way down, adding the legs at the end

Notes: This is also available on the Paperplaza.

Shaymin Sky Forme

2011-09-10T07:47:00.003+02:00

Shaymin is a small, hedgehog-like creature. Its body is pure white. Its back is covered with green fur and has a pink flower with two leaves on each side of its head, which resembles the Gracidea flower, several Gracidea-like flowers also appear on its back whenever it feels comfortable, but when it senses an impending danger, it rapidly hides it back. Its legs are short and its underside is plump. Shaymin is the smallest legendary Pokémon to date. According to the Pokédex height of 0'08", it is also among the nearly smallest Pokémon in existence, with its comrades being Diglett, Natu, Azurill, Budew, Burmy, and Chingling, only surpassed by Joltik.

About the Model:
Height: 20cm
Widht: 13cm
Depth: 25.9cm
Difficulty: 3/10
Number of Pages: 5
Number of Pieces: 37
Download A4 / Letter

Instructions: Start at the nose, finishe the head and start adding the hair starting at the front. Build the body entirely before starting to add the feet. Close the model with the tail. Finish the model with adding the chest fur and the petals.

Note: This model is also available on the Paper Plaza.

Lugia

2011-09-01T21:55:00.004+02:00

Lugia are very large creatures which bear a resemblance to something between a dragon, a plesiosaur, and a bird. They are primarily pale silver-white, but have blue undersides with slightly varying tones. They have a somewhat beak-like, ridged mouths, although they have teeth on their lower jaw. Their head has a point to the back, and Lugia’s eyes have pointed blue or black spikes on them. Lugia have long slender necks and their bodies are smooth and streamlined, with the exception of dark blue or black spike-like protrusions which run down the length of their back, and two smaller ones on the ends of their tails. It has large wings that resemble hands.

About the model:
Height: 30cm (A4) , 28cm (Letter)
Width: 25.3cm (A4) , 23.6cm (Letter)
Depth: 27cm (A4) , 25.2cm (Letter)
Difficulty: Medium-Hard, 7/10
Number of Pages: 5 (Including Shadow Parts)
Number of Pieces: 102 (Including Shadow Parts)
Download Lugia A4 / Letter

Instructions: Start at the spike on his head, build your way down at the other parts eyes the way you go, start the wings at the tips and build your way to the body, start the legs at the toes attach the tail spines wheter just before closing or after closing. Close at the tip of the tail. There are 2 ways to atach the back spines 1: make small cuts on the back and attach the spines while building 2: glue them on the back when you have finished building. Be careful with the teet.

Notes: This was built by Dodoman75. Thanks for building. This craft is also available on the Paperplaza as the third and final opening model.

Keldeo

2011-09-01T01:01:00.000+02:00

Keldeo is pony-like, with a large, feathery red mane, long, dark blue, ridged eyebrow-like features, and a single white horn that is slightly curved. The back of its head, as well as its neck, has light blue-and-white-spotted coloration with spiky edges at the lower portion. Its body is cream-colored, with blue hooves. Its blue-and-white-spotted, lifted and feathery tail is comparable to an elaborate feather in a cap.

About the model:
Height: 24.5 (A4), 22.5 (Letter)
Width: 12.3 (A4), 11.2 (Letter)
Depth: 20.6 (A4), 18.9 (Letter)
Difficulty: Medium, 5/10
Number of Pages: 5
Number of Pieces: 75
Download Keldeo A4 / Letter

Instructions: Start at the tip of the nose, add the horn as soon as possible. Finish the head by going around, and start adding the hair after closing the head. Close the hair with the ponytail. Build the mane and connect it to the neck, and then connect it to the head. Build the base of the body, glue it to the head and then start adding the limbs (first front, later back). Finish the model with the tail.

Notes: This model is also available on the Paperplaza. A new model will come this evening

Sewaddle

2011-08-19T11:12:00.005+02:00

Sewaddle is a caterpillar-like Pokémon, with a broad, apparently bitten leaf enfolding its head. Its large, spherical head is a pale shade of tan, with two sensory knobs higher up on it. Sewaddle's eyes are dark and circular, with a crescent-shaped, toothed orange snout, and the underside of its face and neck is white. The rest of Sewaddle's body is segmented and green, with three rows of stubby, spherical orange legs. It evolves into Swadloon starting at level 20, which evolves into Leavanny when leveled up with high happiness.

About the Model:
Height: 15.9cm
Width: 10.2cm
Depth: 13.4cm
Difficulty: Medium, 4/7
Number of Pages: 5
Number of Parts: 38
Download Sewaddle: A4 / Letter

Notes: Teeth are very small, you can fold them or either cut a triangular shape in 2d. You might need to put some weight in the hind legs or in the body. Be careful when attaching the head to the body.

Instructions: Start with the two bulb on the forehead. Then the first two pieces of the head, and join them together. Work your way down the head and add the nose as soon as possible. Build the body and connect it to the body. Finish with building and gluing the feet to the body. Add the leaf and teeth when you finished the basic body.

Edit: I can't believe this blog reached 50,000 visits today!

Sabi96 going bi-weekly.

2011-08-12T22:36:00.002+02:00

I have gathered enough models, so i am going bi-weekly in September. There will be some excuses, like Christmas, where i will post two models, as for new years, December 6th, November 4th, and a bit more in October, for the anniversary. But... that's two months away, now isn't it?

Starting date is September 1st. Wish me good luck.