Printer Resetter and Service Manual Driver Canon Epson Hp

Reset Canon ip1880/1100/2500

2009-11-02T23:30:00.000-08:00

Buat yang pake printer IP1880 dan yang suka refill cartridge dan hasilnya ngebling, berikut ini ada software dan panduan untuk me-reset printer tsb।Sebagai informasi, resetter ini gak bisa mengubah status ink level indikator. Mungkin dari canon udah rancangan seperti itu. sehingga cara yang digunakan adalah mematikan status indikator untuk ink level.

Pertama download dulu softwarenya disiniSelanjutnya ikuti instruksi berikut ini:
1. Driver harus sdh terinstal dengan benar.
2. Hubungkan kabel
3. Selanjutnya, sebelum kabel power printer dicolokin ke listrik, tekan dan tahan tombol
power dan colok kabel power ke listrik
4. Sambil menahan tombol power, tekan tombol reject 2 kali lalu lepasin tombol पॉवर
5. Jalankan program reset yang udah di download
6. Jangan lupa buka Lock Release di program
( Sekedar catatan : Untuk dapat melihat menu lock release, minimal resolusi
layaranda berjalan di 1024 x 728 )
7. Lalu pilih set destination ke ip1880
8. Tandai CLEANING dan EEPROM CLEAR
9. Lalu klik MAIN dan PLATEN
10.Kalo langkah di atas udah di lakukan, lalu lakukan TES PATTERN1

Catatan : Sekedar info kalo cara di atas juga dapat digunakan pada IP 1100, 1800 डान 2500 series Cara resetnya sama kecuali samsung

Bagaimana cara Reset Printer iP1880 dengan resetter

2009-11-02T23:29:00.000-08:00

Untuk mereset printer iP1880 tidak perlu harus menunggu lama untuk mendownload reseternya, karena kalau kita mau mencoba sebenarnya pakai reseter ip1700 bisa kita gunakan, kami sudah lama menggunakannnya untuk mereset printer IP1880 dengan general tool ip1700. maaf sengaja baru sekarang kami beritahukan... karena sifat orang Indonesia selalu menunggu dan berharap,

Cara reset sementara biar bisa di pake

Printer jenis Ip1880 kalau sudah mencapai akumulasi cetakan tertentu maka printer akan mengalami blinking yaitu 4 x orange 1 hijau atau 8x orange dan 1x hijau, untuk mengatasinya anda bisa mereset sementara dengan menggunakan tombol power dan resume, untuk lebih detailnya silahkan ikuti cara berikut :
1. Cabut kabel power dari arus AC (listrik)
2. Tekan tombol power (tahan) kemudian colokan kabel power ke Listrik
3. Tekan tombol resume 2x (tekan pertama nyala lampu orange, kedua lampu indikator hijau)
4. Kemudian lepaskan, maka printer akan warming up kemudian ready.

Canon Laser Class 9000 series user manual

2009-06-03T22:49:00.000-07:00

if you find the Canon Laser Class 9000 series user manual
You can Download at
http://www.jimd.ca/CLC9000.pdf

How to Clean Scanner Mirrors in HP3330

2009-05-29T22:48:00.000-07:00

This is not an Hewlett Packard document, the author does not work for Hewlett Packard and is not responsible for any damage you do to your printer. This procedure is for skilled repair technicians and is not recommended without some knowledge of equipment repair. Proceed at your own risk.

1. Open the document feeder and pull up on the two black tabs on the left and right.
2. Pull up on the right part of the doc feeder then the left, remove doc feeder, set aside.
3. Open front door and rear fuser door.
4. Remove screws closest to teal colored fuser release levers. (side cover screws)
5. Pull right cover out from back while releasing clip on bottom of cover, pull cover towards the back and remove.
6. Push on indentation at back of left cover and pull out at back, this cover is hinged.
7. Remove four screws now visible at base of scanner assy., two on left two on right.
8. Slide covers towards back and remove.
9. Remove two screws in the back just above the fuser and just below the scanner assy. base. Remove two screws in the front, visible now after removing the scanner assy. base covers on the right and left (the left one is just behind the hinged cover near the top hinge.)
10. Remove flat ribbon cable (on left side) at either connection point to disconnect scanner assy. from print engine.
11. Entire scanner assembly can now be slid forward and removed.
12. Close the front, rear and left side doors on the print engine portion and set it aside.
13. Grab front panel face plate at top and pull forward and remove. (or pry gently at top of face plate).
14. At top of exposed front panel you will see four slots in the scanner assy. At the third one from the left there is a latch (dark grey plastic). Push down on the latch with a screwdriver and slide the whole panel assy. to the right. Lift up and out making sure to disconnect the cable.
15. Remove the three screws in the now exposed dark grey front panel cradle and cover, remove the two cables connecting the cover to the main board, pry gently at the top outer corners of the cover and pull it forward and down, remove the cover.
16. Now remove the four scanner assy. screws (one and the center front, center back, center right, center left) all are facing down under the assy. (Or just flip it upside down and remove the four visible screws.
17. Turn the unit back upright and remove the four screws at the back/top (two of them are down inside where the doc feeder normally goes.) Remove the top scanner cover.
18. DANGER your about to work on the scanner carriage itself there is a really good chance that you could break it or the mirrors or bulb so proceed at your own risk.
19. At the top and bottom left side of the black cover enclosing the mirrors are two slots, if you put a small screwdriver in the slots and push gently to the right and lift that side of the cover it should come loose. Then open it to the right and remove it from the right slots.
20. Remove the black screw at the front of the assy., Disconnect the white wires from the CCD board and out of the harness, lift the clear plastic bulb holder out with the bulb then remove it from the rear. (it’s a tight fit at the front.)
21. The top mirror is held in by some really tight clips they have to be removed from the bottom right (clean the mirrors without this step if possible). NOTE: optical mirrors are not like a bathroom mirror, there is no glass covering the reflective surface. The back side of the mirror has glass covering it so if you get it in backwards it won’t work. (The way to tell which side you have is touch your screwdriver to the mirror and if it’s the right side the screwdriver will appear to touch the reflection of the screwdriver, if it’s the wrong side the screwdriver will not touch the reflection of the screwdriver because of the glass covering the reflective surface.
22. Now clean the remaining mirrors and lens very thoroughly with alcohol. Make sure they are very clean. You can put the top mirror back and clean it in place to make cleaning it easier.
23. When re-assembling the top cover check to make sure the white strip on the right side is clean.
24. Reverse procedure for re-assembly.

Canon Pixma iP3000

2009-05-26T22:47:00.000-07:00

iP3000 power supply K30233 only has three wires.
Measure voltage with power supply pulled out of printer but with 3-wire plug still plugged up. Printers logic board turns power supply 8 volts stand by to 24 volts run voltage.

Pin 1 red wire = 8 volts dc printer off and 24 volts DC printer on.
Pin 2 black wire = printer ground
Pin 3 yellow wire = 0 volts dc printer off and 3.1 volts dc printer on.

Download HP laserjet 1015 Free Service Manual

2009-03-05T22:22:00.000-08:00

This HP Service Manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the HP laserjet 1015 printer. And These manuals are the same ones used by the Techs to repair your HP Printers.

This HP laserjet 1015 service manual consists of

1. General Description
2. Specifications
3. Operating Principles
4. Disassembly and Assembly
5. Adjustment
6. Troubleshooting
7. Maintenance
8. Reference Materials

Download HP laserjet 1015 Service Manual

Free Download Resetter For Printer

2009-03-05T22:18:00.000-08:00

EPSON STYLUS CX9300F Printer Plotter.

Detailed instructions for use are in the User's Guide.

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON STYLUS CX9300F.

EPSON offer a product for which we do not have the user manual? Let us know what you are looking for:

user manual, user guide, instructions, owner's manual, online manual, user's manual, users manual, users guide, owner manual, owners manual, user's guide, handbook, instructions for use, instruction manual, operation manual, operating instructions, installation guide, quick start guide, quikstart guide, getting started, installation instructions, installation guide,mounting instruction, assembly instrucions, fixing instructions, use instruction, schematics, operating manual, feature sheet, data sheet, booklet, service manual, use and care guide, installation manual, installation software, RTFM.
Diplodocs allows you to download user manual EPSON STYLUS CX9300F, user guide EPSON STYLUS CX9300F, instructions EPSON STYLUS CX9300F, owner's manual EPSON STYLUS CX9300F, online manual EPSON STYLUS CX9300F.

reset canon,reset epson, reset printer,printer, HP printers, check printing, laser printers, hp printer cartridges, Cartridge,hewlett packard printers, hp all in one printers, all in one printers, hp printers,color laser printer, color laser printers

All Information find at resetter

LASERJET 1300 FUSER ASSEMBLY rapidshare.com

2009-03-02T15:12:00.001-08:00

This problem solution have to fix
hp c5010a chip
mp140 error 5
how to reset canon mp470 ink cartridges
Canon iP2500 error blinking light
dowload resetter epson c79
ssc service utility r290
hp 1500 printer won't recognize a refill cartridges
ssc service utility r290
my hp 4100 printer keeps blinking
C45 Epson - Service Tool
cx5500 service manual
canon mp190 reset pdf
epson print cartridge reset schematic
C45 Epson - Service Tool
epson r265 counter reset
mp170 service mode
chip epson 9 pin out
LASERJET 1300 FUSER ASSEMBLY rapidshare.com
software resetter CLI-8 and PGI-5 rapidshare
Canon laserjet 8000N error code
Canon Mp220 reset
http://canon-epson-hp.trikdownload.com

Student Loan Consolidation

2009-03-01T00:14:00.000-08:00

It's January of your senior year and time to start thinking about all those loans you took to help pay for college. Between Stafford Loans, Perkins Loans and all the rest, between subsidized and unsubsidized you begin to realize that a year from now you will have run out of grace period and have to start paying back all those loans. You're going to be paying back eight different loans at eight different interest rates and eight terms. It's time to start thinking about a student consolidation loan.

Source : http://litles.blogspot.com/2009/02/student-loan-consolidation.html

This a Map For Printer Resetter Software Download

2009-02-25T23:57:00.000-08:00

HP Deskjet D1360 Printer Review

2009-02-25T22:48:00.000-08:00

Ideal for the basic home user or small office, the Deskjet D1360 is an ultra-
compact, affordable, easy-to-use printer designed to print laser-quality black
text documents as well as colorful home and family projects.

The compact
size of the HP Deskjet D1360 printer conveniently fits in small spaces and
delivers fast efficient print speeds of up to 16 pages per minute (ppm) in black
and up to 12 ppm in color. Users can effortlessly share, save and print vibrant
photos using the included HP Photosmart Express software

more here

Cara mereset Canon ip1880

2009-02-25T22:46:00.000-08:00

download resetter for Canon ip1880
download here
http://rapidshare.com/files/79771944/ip1880.rar

Epson R240 service manual

2009-02-25T22:44:00.000-08:00

1. Switch on printer
2. Set the date to 15 February 2006
3. Run adjprog.exe from the extracted folder
4. Click accept
5. Click particular adjustment mode
6. Go to maintenance then Select waste ink pad counter then click ok
7. Click on "check button till its done then click on initialization button then click on finish button
8. Switch off printer for 5secs then switch on again
9. After you reset succesfully, you can change the date back to normal

Download here
http://www.mediafire.com/?2jmomd3ln1z

Resetting the Hewlett Packard C5010A

2009-02-15T20:15:00.000-08:00

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the OfficeJet D Series:
1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press the < and > (also the + and -) at the same time, then release quickly (the lcd panel must be showing the date or the procedure will not work)

3. On the keypad, press in order 4,5, 6.
4. A message will appear asking if you want to override the ink level gauge. Press 1 for yes (You can later turn the ink gauge back on if you install a new cartridge by going through steps 2 and 3, then pressing 2 when prompted if you want to override the ink level gauge).
Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the HP Color InkJet CP 1160 Series:

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press and hold down the power button.
3. While holding the Power button:
Press the Cancel button 12 times
Press the Resume button 3 times
4. Release the Power button

The ink gauge is now off and you can resume printing

To reset the HP C6657A (#57) or HP C8728A (#28)

2009-02-15T20:14:00.000-08:00

To reset the HP C6657A (#57) or HP C8728A (#28):
1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 2:

If Reset Method 1 did not work on your printer, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

How To Reset HP C6578 Printer

2009-02-15T20:13:00.000-08:00

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the Click here to enlarge only the four blue colored contacts (a contact is the individual copper square). Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue contacts. Place the tape over the four red colored contacts. Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 2:

1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 3:

If neither of the reset methods above worked, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

Resetting the Hewlett Packard C5011A

2009-02-15T20:12:00.000-08:00

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used in the OfficeJet D Series:

1. Refill your cartridge using your Mr. Ink Jet refill kit.HP Officejet D145
2. Press the < and > (also the + and -) at the same time, then release quickly (the lcd panel must be showing the date or the procedure will not work)
3. On the keypad, press in order 7, 8, 9.
4. A message will appear asking if you want to override the ink level gauge. Press 1 for yes (You can later turn the ink gauge back on if you install a new cartridge by going through steps 2 and 3, then pressing 2 when prompted if you want to override the ink level gauge).

Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used in the HP Color InkJet CP 1160 Series:
1. Refill your cartridge using your Mr. Ink Jet refill kit.HP Color Inkjet cp1160
2. Press and hold down the power button.
3. While holding the Power button:
Press the Cancel button 12 times
Press the Resume button 1 time
4. Release the Power button
The ink gauge is now off and you can resume printing

Resetting the HP C6656A

2009-02-15T20:11:00.000-08:00

1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the light blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact on the cartridge. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Intruction To reset the HP 51645 or HP C6115

2009-02-15T20:09:00.000-08:00

To reset the HP 51645 or HP C6115:

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the HP 45 printhead, contacts, resetting the 51645aonly the four blue colored contacts (a contact is the individual copper square). Make sure that only those four are covered and no others.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue contacts. Place the tape over the four red colored contacts. Make sure that only those four are covered and no others.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

If Reset Method 1 did not work on your printer, go through the same procedure again, but this time using the green colored contacts in step 2 and the brown colored contacts in step 4. This method is more commonly used for the #15 or in the later officejet printers.

If neither of the reset methods above worked, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

HP Laserjet Error Codes 13.99 PAPER JAM LOCATION

2009-02-10T15:48:00.000-08:00

1. Remove jammed media from the specified location.
2. Verify the paper tray is fully closed.
3. Inspect and/or replace the feed and separation rollers.
4. Ensure there is no obstruction in the path, such as a torn piece of paper.
5. Open and close the top cover to clear the message.
6. Check sensors and flags for proper operation

HP Laserjet Error Codes 13.21 DOOR OPEN JAM

2009-02-07T15:47:00.000-08:00

1. Check the transfer roller and small media belt to ensure they are operating and can feed print media.
2. Check the paper path for obstructions at the transfer roller, toner cartridge, paper feed assembly, and fuser.
3. Replace any defective sensors or flags.
4. Turn the media stack over and/ or rotate it by 180° in the input tray.

HP Laserjet Error Codes 13.6 PAPER JAM CHECK REAR DOOR

2009-02-06T15:48:00.000-08:00

1. Check the paper path for obstructions at the fuser and output/delivery area.
2. Replace any defective sensors or flags.

HP Laserjet Error Codes 13.20 PAPER JAM CHECK REAR DOOR

2009-02-06T15:46:00.000-08:00

1. Remove all media in the paper path, and then open and close the top cover.
2. If the message persists after all media is removed: Check if media is jammed in the prefeed area. Replace any defective sensors or flags

Laserjets 5P, 6P, 2100, 2200 and other printers

2009-02-06T15:38:00.000-08:00

Laserjets 5P, 6P, 2100, 2200 and other printers that do not have a display panel (LEDs only).
These models are designed as low volume personal printers and do not have a maintenance count that needs to be reset or a readily accessible service mode. You can cold reset these printers or completely reinitialize the NVRAM (nonvolatile ram) to factory defaults. Cold resetting will reset most of the system parameters to factory defaults and reinitializing the NVRAM will reset ALL system parameters to the factory defaults. Also, there is a service mode for these printers but it is only accessible through software using PJL service mode commands. Buy the printer's service manual if you want to learn more.

HP Laserjet 5L, 6L, 1100, 1200 do not have a service mode. You can only perform a cold-reset and continuous self-test.

Multifunction printers - printers/copiers/fax/scanners (e.g. HP 3100, 3150, 3200, etc.)
Service modes in these printers are more extensive because of the scanning and faxing features. We recommend buying the service manual for these units if you will be doing any repairs beyond mechanical components.

HP Laserjet Error Codes 13.2 PAPER JAM OPEN INPUT TRAYS

2009-02-05T15:46:00.000-08:00

1. Check the input area for obstructions such as paper in the path. Also check to see if the registration assembly is damaged or if the transfer roller is out of place. 2. Replace any defective sensors or flags.
3. Ensure the media does not exceed the maximum length.
4. If multiple sheets are feeding, it might be necessary to fan the media and reduce the stack height. Also, replace separation pad.
5. Verify that the fuser is properly installed.