Sir Warroior - S13 Blacktop SR20DET Project

noreply@blogger.com (Sirwarrior) — Sat, 19 Jul 2008 07:30:00 +0000

Got my stuff back from powdercoating and I'm liking the finish a lot. Its a black "wrinkled" black, that reminds me of Honda bike color called "asphalt." I got the differential cover done at the same time, and they came out awesome. I'll probably get more stuff done later on in the build.

noreply@blogger.com (Sirwarrior) — Thu, 26 Jun 2008 20:10:00 +0000

Ordered up few seals for the diff. I already picked some up and will be receiving rest shortly, also going to be replacing the steering rack bushings soon.

more updates after S14 is done. Or if I'll be messing around with some side projects.

noreply@blogger.com (Sirwarrior) — Sat, 21 Jun 2008 02:59:00 +0000

Since I had some time and Vin pulled the diff apart, I took it to get it cleaned up.

Few hours over at Lewe's garage, some primer and than some paint, the thing looks awesome now. Just few seals and new LSD to make it complete.

noreply@blogger.com (Sirwarrior) — Sun, 08 Jun 2008 19:09:00 +0000

Thanks to one of the Zilvia guys, wiring for S13 cluster

Well here goes - ive done all this from scratch with wiring diagrams and following wires and circuit boards so may not be 100% but at lease we have an idea and a place to put all the info.

Ill still advise getting asmany wiring diagrams as you can though as this aint gonna be 100% and is done for a UK car that had a CA as standard.

This is how ive gone about labeling the wires and connectors.

Connectors are done A -> C going left to right as you look at the back of the cluster.

Wires are numbered top left -> top right and bottom left -> bottom right. This is also done from looking at the speedo from the back (aka looking from the wiring side nto the cluster side).

No number = no wire

S13 CLUSTER WIRING :
A1 TM
A2 Chg
A3 Ground
A4 No wire
A5 Batt
A6 Door
A7 Ign
A8 Brk (diff)
A9 Oil
A10 Brk (handbrake)

B1 HICAS
B2 Ill+
B3 Tam
B4 Beam
B5 Beam
B6 T/R
B7
B8 Ill+
B9 Jap writing
B10 10K
B11 T/L
B12 Ground

C1 Jap writing
C2 2P
C3 Ill-
C4 Fuel
C5 FM
C6 ALB
C7 Main beam
C8 Main beam
C9 PWR
C10 Exh

noreply@blogger.com (Sirwarrior) — Fri, 23 May 2008 04:03:00 +0000

Sorry but with no updates, but almost all of the work is being done is in the 600sx project.

Check link on the right to see what I'm up to.

noreply@blogger.com (Sirwarrior) — Sun, 02 Mar 2008 07:38:00 +0000

Note to self.
Spacers
12mm knurl
12x1.25

noreply@blogger.com (Sirwarrior) — Sun, 03 Feb 2008 12:38:00 +0000

Making a post because I always fuck up this info
Original FA post

www.car-part.com

search for a carrier(see also differential) for a 2001 nissan xterra

it will then ask you what diff you are looking for. click:

Front Axle, (6 cyl), SE (4.636 ratio)

it will bring up a list of junkyards that have the front differential assembly you need. call them, and have them absolutely 100% make sure that you are getting either the 37:8 or 51:11 ring and pinion set. tell them to even make sure they take the back cover off and check for the markings on the ring gear. i've seen a lot of yards screw that up when they inventory their product. there is a also a 49:10 set giving you obviously a 4.900 rear end ratio.

now when they ship this to you, you'll look at it and say what the hell is this monstrosity. don't worry, take it apart, because all you need out of it is the ring gear and the pinion. throw the rest of it in the garbage.

this pretty much puts you exactly at the same point you would be at as if went to nissan and ordered the nismo ring and pinion. install it into your R200 pumpkin as per the FSM and you now have much better gearing for a high revving motor.

noreply@blogger.com (Sirwarrior) — Thu, 31 Jan 2008 21:41:00 +0000

Browsing more forums. Nothing exciting at work, so I'm just wasting time till 5pm. Than I look through classifieds. BAD MOVE.
Next thing I know I'm on the phone with some guy in TN telling him that I'll buy his Power FC.
Yep, it sucks having too much free time at work, but you do end up saving $$ in the end.

Technically there is a catch as the Power FC is for J4 ECU's and not for 62/E5, but nothing a little rewiring a few pins won't fix.

Here's the pinout change between E5/62 and J4 ECUs

noreply@blogger.com (Sirwarrior) — Wed, 30 Jan 2008 07:28:00 +0000

Z32/Z33 trans, I found this good write up on adapting it to SR. Maybe even help with Vin's Q45 project :D

Also mentions use of Q45 rear end for the longer final gear.

http://forums2.freshalloy.com/showpost.php?p=1434016&postcount=9

"Bellhousing needed to be shaved 1/2" to make way for the transmission adapter. Bottom portion was omitted because we won't be using the two bottom bolts.

Trannies and drivetrain components shouldn't be rated by horsepower but rather torque capacity. I currently don't know what the Z33's gearbox is good for, but after opening it up and comparing it to the Z32's gearbox, it's not a huge difference. It's a significant upgrade from the SR gearbox, that's for sure.

Test fitment will start as soon as I have the engine bay painted. Right now it's bare metal. A quick mockup indicated it won't interfere with the firewall / trans tunnel, but a more thorough test fitting will be performed.

Transmission crossmember and mount will definitely be a custom piece. All I'm going to do is use a block of 50 durometer urethane and some plate steel and fab the mount myself.

Driveshaft will most definitely need to be custom made. Length will be different, spline count of the output shaft may be different, and I'm wanting to keep the slightly larger bolt pattern of the Q45 input flange.

Q45 R200V uses a bigger pinion for the output flange. I haven't researched what flanges are compatible. All I know is drivers side 300ZX TT axle on the drivers side, early model drivers side Q45 axle on the passenger side, and either Q45 or 300ZX TT rear hubs. The conversion will have the benefit of slightly larger axles.

Shifter will need to be shortened at the shift rod's universal joint. Some say a VQ40 manual transmission shift lever support bracket will work, but I'm just going to cut mine and weld it back together. With the lever fork right at the u-joint, close to factory shift lever position will be retained.

For a single plate clutch, I've done some measurements and what will work is SR flywheel + SR clutch + SR TOB sleeve + SR TOB + VQ slave cylinder. My ORC twinplate has the same pressure plate contact depth. I could theoretically use the stock TOB, but I got an ORC TOB who's entire body spins"

A little bid down I read this:

"I did some more research on this. The 350Z, 05+ V6 Frontier, and the 05+ Nissan Xterra all use the FS6R31A manual transmission gearbox, and the gear widths are identical per the official Nissan FSMs.
On a side note, it appears that the 05 Frontier 4-cyl equipped with the QR uses the FS5R30A 5-speed manual. For those that know, this is the same gearbox that's in the Z32 300ZX.

So essentially:

05+ Frontier 4-cylinder uses FS5R30A Z32 gearbox
05+ Frontier 6-cylinder uses FS6R31A Z33 gearbox

I'm now led to assume that the Z33 gearbox is equal to or greater than the Z32 gearbox in terms of strength."

noreply@blogger.com (Sirwarrior) — Tue, 29 Jan 2008 06:56:00 +0000

So no pics, I know, but my final missing piece, Z32 trans, came in today. Got to try to get it tomorrow from Raffi, hopefully will hijack the Mustang to get it home. According to shipping its about 126lbs, but that includes pallet/packaging. Very happy about getting it here, one less thing to worry about later on :D

noreply@blogger.com (Sirwarrior) — Thu, 10 Jan 2008 19:02:00 +0000

I came across a deal for a Z32 to SR trans kit. Hard to pass on something like this, so I got it. should be here sometime in the next week or so. Very nice :D

noreply@blogger.com (Sirwarrior) — Mon, 17 Dec 2007 10:52:00 +0000

More parts from Kuah arrived last week. Nothing new besides that as its too cold to do anything and holidays are crazy.

noreply@blogger.com (Sirwarrior) — Mon, 03 Dec 2007 02:13:00 +0000

Lots of little things to update.

First of all, ordered up some wheels, in the 17x9.5 +29 variety. So spacers are going to be next - probably 1.25in. The centers will need to get redone as well.

Second, all my new pulleys are installed as of today. But I the belts might be different, so I got to check up on that.

Third, the LEDs came in, the project looks promising so far, but I didn't get the spare tail lights, so I'm going to wait and modify the S14 third brake light first. But I also will get the heater controls and probably gauges redone with LEDs over next few weeks.

noreply@blogger.com (Sirwarrior) — Tue, 27 Nov 2007 05:42:00 +0000

Finally the pullies arrive. Test fitted them against OEM and it looks correct - so my worries are over. Just few more internal things and the engine will be getting redone. Can't wait.

noreply@blogger.com (Sirwarrior) — Fri, 23 Nov 2007 23:08:00 +0000

Black Friday - Touge Factory was having a sale. Not exactly good idea to go there after getting a paycheck. Dropped off the harness for Eric, was supposed to pick up my pulleys, but I ended up walking out with overflow tank, a wideband and a Tshirt. No pulleys - too many shiny things distracting me. hehehe

noreply@blogger.com (Sirwarrior) — Tue, 20 Nov 2007 07:41:00 +0000

Didn't get a chance to measure the size of the fitting in the back of the valve cover, but the T on the size is going to get tapped for 3/8NPT and AN lines that go to the catch can.

noreply@blogger.com (Sirwarrior) — Fri, 16 Nov 2007 16:21:00 +0000

White - to White on the stock Harness
Black - to Ground on the car
Black - to the Black on the Stock harness
Red - to the Black and White stripes wire on the Stock Harness

noreply@blogger.com (Sirwarrior) — Wed, 14 Nov 2007 05:10:00 +0000

Wideband is MIA, which sucks. But I fixed Ben's car this Sat, which was more pain in the ass than I thought. But all was well untill Freddy intake manifold busted. DOH! But made me want my car done that much more.

noreply@blogger.com (Sirwarrior) — Fri, 09 Nov 2007 07:42:00 +0000

NISSAN Knock Sensor

PART No 22060-30P00

Years	Make	Model	Engine
1995-1998	NISSAN	200SX , SE-R	L4 2.0L
1991-1998	NISSAN	240SX, LE, SE	L4 2.4L 2389cc , L4 2.0L 1998cc
1989-1996	NISSAN	300ZX	V6 3.0L
1993-1999	NISSAN	ALTIMA GLE, GXE, SE. XE	L4 2.4L
1990-1993	NISSAN	D21 PICKUP, SE	V6 3.0L
1998-1999	NISSAN	FRONTIER	L4 2.4L
1992-1999	NISSAN	MAXIMA GLE, GXE, SE	V6 3.0L
1991-1993	NISSAN	NX	L4 2.0L
1992-1999	NISSAN	PATHFINDER LE, SE, XE	V6 3.0L & 3.3L
1994-1996	NISSAN	PICKUP, KING CAB XE, SE	V6 3.0L
1993-1998	NISSAN	QUEST GXE, XE	V6 3.0L
1991-1999	NISSAN	SENTRA GXE, SE-R, LE, SE, XE, CLASSIC	L4 1.6L & 2.0L
1990-2001	INFINITI	J30 & Q45	ALL
1991-1996	INFINITI	G20	ALL
1997-2000	INFINITI	QX4	ALL
1996-2001	INFINITI	I30	ALL
1990-1992	INFINITI	M30	ALL

noreply@blogger.com (Sirwarrior) — Tue, 06 Nov 2007 07:06:00 +0000

Sard FPR arrives. Comes with fitting and even a gauge. Pretty sweet - waiting to see when the seat arrives - hopefully by the weekend.

noreply@blogger.com (Sirwarrior) — Wed, 24 Oct 2007 04:58:00 +0000

Since I had the Taka lines already, I started to see how they would fit, so fittings are in, just got to mount the exhaust manifold and turbo to get the clocking or the lines right. I've also have to order up some more fittings for the valve cover and power steering pump, as going with full AN lines for the power steering seems like the best idea ATM. The catch can will have AN lines as well, but I haven't really thought about the lines/fittings for now.
As far as other issues go, I am hopefully going to get Bride FG rails sometime next week, so getting a seat is going to be next priority. Other than that I will go back and focus on the wiring again before it gets too cold to work in the garage again.

noreply@blogger.com (Sirwarrior) — Sat, 20 Oct 2007 05:58:00 +0000

Big day today, along with sending out some of my old and unneeded parts to various places of the country, I received my some cool stickers.

Yes, they came in the same box as the Hyper Single ;D

The old Exedy is for sale, with plenty of life left, as is the SR flywheel.

noreply@blogger.com (Sirwarrior) — Tue, 16 Oct 2007 01:25:00 +0000

There goes not focusing on motor!!! LOL. Today I came across a killer deal on a brand new HyperSingle - couldn't pass it up. Paypal'd already and hoping to see it sometime next week. Hopefully it will go smoother than the other transactions that I've been going through lately.

noreply@blogger.com (Sirwarrior) — Sun, 14 Oct 2007 18:06:00 +0000

After months of standing on jack stands, the car is finally standing on four wheels. With all of the suspension components installed, a lowered stance and Starion wheels on rear, it looks good. There are few things that are still missing (sway bars) and few things that need to be re-done (brake lines), but overall it is starting to come together.
Most likely I will need to focus on seats and roll cage next, and leave the motor for later. Its not a crucial element at the moment and there is still a lot of money that will go towards finishing that after the chassis is finished.

noreply@blogger.com (Sirwarrior) — Thu, 11 Oct 2007 03:03:00 +0000

MBV kit finally came in. Took it more than I'd like, but thats seems to be common theme lately with everything. Started looking around for another ATS clutch but nothing promising at the moment. Might end up with Hyper single or a Blitz active clutch.