stugods 3d blog

Telescopic sight created with turbocad pro v 15

2011-04-03T20:02:00.002+01:00

3d slice of a piston

2011-04-03T20:01:00.000+01:00

Orbit gum holder created in turbocad

2011-04-03T19:59:00.002+01:00

Top view of the beam splitter

2010-11-20T08:04:00.000Z

Full dimension ability in turbocad

2010-11-20T08:02:00.001Z

Welcome to the 3d world of turbocad

2010-11-01T17:39:00.003Z

Before you go dashing through this Blog please remember the images here are not photographs, They are created with turbocad 2d 3d design software. Just to make things more interesting the file which comes with the drawing can be used to make each component via a CAM program and is an extremely powerful tool.
Once done in Turbocad the components can be made again and again with no extra cost.
Always back your drawings up of course and you have it forever.
Another useful little trick is that once you have the scaling factor three clicks of the tab button and you can make a bigger component.
Is it easy to learn. ?
No it bloody well is not but if an old demolition contractor can learn it anyone can.
Some of the items on here are just doodles which I do in my spare time, I think you will quickly see which they are.
The others are serious data to make just about anything you want.

Side view

2010-11-01T17:38:00.000Z

Fitted to the first long reach 70 tonne cat in the uk

2010-11-01T17:36:00.000Z

Isometric view

2010-11-01T17:35:00.000Z

Beam splitter in the closed position

2010-11-01T17:33:00.001Z

Beam splitter fitted to the first long reach 245 caterpillar in the uk

2010-11-01T17:32:00.001Z

Rendering with lightworks

2010-11-01T17:30:00.002Z

Isometric view

2010-11-01T17:29:00.000Z

cnc control in turbocad professional v 16

2010-11-01T17:28:00.000Z

Recycling grab in turbocad

2010-09-23T18:41:00.001+01:00

The following pictures are of a scrap metal or waste material re handling grab designed in turbocad professional v 15.
The grab is made of 20mm plate steel and weighs about 2 tonnes.
The unit consists of a fixed jaw and a moving jaw.
By a number of steps ie 3d adding the moving jaw making it all one unit and then relocating the reference point to the centre of the main pivot pin the moving jaw can be rotated around this axis to check for travel and clearances.
The following pictures show the moving jaw in various stages of rotation

Fully closed position

2010-07-27T18:44:00.001+01:00

On 80 mm pins fitted to a twenty tonne machine

2010-07-27T18:42:00.000+01:00

materials handling

2010-07-27T18:40:00.000+01:00

metal and waste handling

2010-07-27T18:37:00.001+01:00

recycling metals the easy way

2010-07-27T18:35:00.002+01:00

The great escape "NOT"

2010-07-27T18:21:00.003+01:00

well it was about this time that I hatched my escape plan which was not a total success not even a partial one.
In the visitors entrance was a rather large mat for wiping your feet on, It sat in a recess which was about two inches deep after lifting the mat I discovered planking which was secured with large brass headed screws.
After a brief visit to the kitchen I returned with a teaspoon and soon had all the screws removed.
The void below was more than adequate to allow me to enter the underfloor space but my heart sank when I realised that the sunlight entering the void was due to the fact that visitor block was in fact raised above the outside ground level and digging my way out of here with a teaspoon would be beyond even my resourcefulness. anyway it still felt like temporary freedom.

Brings back memories

2010-06-09T18:08:00.001+01:00

How to design car wheels by catia

2010-05-19T23:01:00.002+01:00

reBlog from Georganna: A Writer's Edge

2010-05-18T22:09:00.002+01:00

I found this fascinating quote today:

What are "emergency 911 interviews" with authors? I found this phrase twice in PR material about a book. If I make a 911 call, it will definitely NOT be to interview an author. How about you? What would constitute an "emergency interview" anyway? Georganna, A Writer's Edge, May 2010

You should read the whole article.

Thou shalt not burn books

2010-05-15T15:17:00.004+01:00

It was about this time that religion got to grips with me again. I received my free copy of the gideons testament. Do not ask me what it is but I always assumed it was some sort of charitable trust that gave bibles out but do not really know.
It occurred to me that the wafer thin pages of said religious text would make ideal cigarette rolling papers coupled with the gum from prisoners letters I started my first production run with much gusto.
All was going fine until like a drug dealer starts using his stock I started lighting up at night with the inevitable consequence of old scar face catching me and pointing out the error of my ways.
Time to sell my shares in stugod's lites and let some other mug take some flack.
If you were really good you get the average cigarette down to roughly the same size as a matchstick and are still known today as an Armley special. "Armley being Leeds prison"
Anyway smoking is bad for you especially if you get caught by a screw.