The Pyle PLAM2300 MOSFET amplifier offers 2 x 1150 Watts of high-quality sound (bridgeable to 2300 Watts for powering a sub) for your vehicle, with low harmonic distortion, plenty of reserve voltage and high temperature stability. Expand your system. Click to enlarge. View control diagram. Click to enlarge. Input Options The PLAM2300 accepts speaker level inputs from radios high-level, low-impedance MOLEX connectors, along with RCA low-level inputs from .1 to 1 volts. Line Output This allows you to conveniently connect an additional amplifier without having to wire it separately to the source unit. Bass Boost Add a little low-end boost with selectable bass boost of 6dB or 12dB. High- and (more…)

The Boss Audio Diablo D500.2 MOSFET bridgeable 2-channel power car amplifier is exactly what every trick-out car audio system needs. From its trimode operation to its remote subwoofer level control to its 0 to +18dB variable bass boost. Its signal-to-noise ratio is greater than 105 dB for clear sound without a lot of garbage cluttering up the airwaves. Complete with both variable high and low pass crossovers, input gain control and input sensitivity selector, this amplifier puts quality sound and control at your fingertips.

(more…)

Duh, it’s a car stereo! If you are new to the car stereo market, you may find yourself overwhelmed at the sheer number of parts and accessories that can make up a top of the line car stereo system. In this guide, we’ll explore the basic components that make up a functioning car stereo system, technologies, brands and everything in between.

(more…)

• Pyramid PB448X 4/3/2 Channel 1000W MOSFET Amp w/Sub X-Over
• Four Channel Bridgeable Amplification
• Tri-Way Configuration: 4/3/2 Channels
• 4×250 Watts Total Output @ 4 Ohms
• 1000 Watts Total System Output
• Variable Gain Control/Remote Turn On/Off
• MOSEFT Pulse Modulation Power Supply
• 2 Ohm Stereo Stable
• Built-in Variable Subwoofer Crossover (Rear)
• Gold Plated RCA Low Level Inputs
• Hi-Level Low Impedance MOLEX Input
• Speaker Output Terminal Strip
• S/N Ratio: Greater Than 90dB
• THD Less Than 0.04%
• Frequency Response: 15-30k Hz
• Overload/Thermal/Short Circuit Protection
• Power On LED Indicator
• LED Diagnostic Condition Indicator
• Max Current: 30A

It is a no-holds barred look at NASCAR that will appeal to the legion of fans who live and breathe the fumes of NASCAR as well as those who don’t know a spark plug from a carburetor.

(more…)

75 Watts x 2 Channel OutputTransformerless Direct Coupled idge Type Amplifier/Booster Sleek Compact Design Rotary Bass Treble Control Power On/Bypass Switch Power On LED Indicator For 12VDC Negative Ground Systems Can Be Mounted Under Dash Connects Between Car Radio Speakers Easy Installation Accepts High or Low Impedance Inputs Gold Plated RCA Jacks Built-in Heavy Duty Heatsink Dimensions: 4.5-Inch W x 1.75-Inch H x 6.65-Inch L

(more…)

Get some monstrous sounds with this MXA282 1000W amp. A DC to DC switching power supply provides headroom for even the most demanding peaks and dynamic ranges found on modern recordings. With an HP/LP crossover, advanced protection circuitry, high and low level inputs, a variable phase shift control, and more, the MXA282 is ready for most applications. You want overhead? You got it. Click to enlarge. Blue illuminated controls dial it in and look sharp doing it. Includes remote bass boost control. Two Channel or Bridged Mode Run in two-channel mode for 2000 Watts peak power (1000 Watts RMS) or bridge to your sub for a whopping 4000 Watts peak (1650 RMS). Input Level Controls Enables the matc (more…)

High performance amplifier with 400-watt max power 4 X 90W rms @ 4 ohms4 X 180W rms @ 2 ohms2 X 360W max @ 4 ohmsMOSFET circuitryHigh and low level inputsSelectable crossover (LPF/FLA/HPF)

(more…)

3000 Watts Max Power Class D Monoblock Power Amplifier, 1-OHM Stable

(more…)

Class D Monoblock Subwoofer Amplifier *

High-Damping Class D Circuit with discrete control circuitry *

Differential-Balanced Input Topology: 1 pair of inputs *

On-board Crossover: Fully-variable (40-200 Hz), selectable-slope (12 or 24 dB per octave) LP *

Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option *

Preamp Output: 2-channel (independent active filter, parallel with amp filter or pass through) *

Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz *

Signal-Sensing Turn-On: Permits operation without remote lead *

Dual mono speaker output connections: Accept up to 8 AWG wire *

+12V and Ground connections: Accept up to 4 AWG wire *

S/N Ratio: >95dB below rate (more…)