Surfy Surfy

Mandala Surfboards & Surfy Surfy

2012-05-25T21:50:00.000-07:00

DIMS: 5'4" x 20 1/2" x 2 1/2"
You know who you are...

Johnny Lynch Abroad

2012-05-24T13:46:00.000-07:00

Surfy Surfy team rider Johnny Lynch has released his new short film, Abroad onto the world wide Interwebs.
Watch here on Surfy Surfy or visit lynchfilm.com
Below is a nice wave Johnny got on our shop 6'3" Campbell Brothers 5 fin Bonzer while making the film:

This is a 6'6" Astro Egg

2012-05-23T15:33:00.001-07:00

6'6" x 21 1/4" x 2 5/8"
Great length for an egg. Adaptable for humans of all shapes and sizes.
Shaped by Gary Hanel.
Astro bottom channel.
5 FCS Fusion boxes so we can up sell you a quad fins, thruster fins and a Nubster trailer.
MUHWAHAHA!!!
*cough*
Anyhoo, this board is available via our online store: clicky clicky

One of them Astro Eggs

2012-05-22T13:30:00.000-07:00

This is one of those Astro Eggs you've been hearing about on the Interwebs.
It's got 5 FCS confusion boxes for all your all multi finny wants and desires.
The Astro bottom was invented by GH in the 1980's so now it's retro.
5'10" x 20 1/4" x 2 1/2"
Moon Froggy approved!
It can be yours: clicky

Fresh GH Astro Eggs

2012-05-21T10:32:00.000-07:00

(with trendy 5 box option for the undecided...err um, for versatility).

9'4" x 23" x 3"

2012-05-20T08:23:00.000-07:00

100% handshaped by Mike Slingerland.
Ice blue resin tint by Gary Stuber at Moonlight Glassing.
Few things sweeter in this universe than a clean 3 stringer...

Naked Fish

2012-05-18T10:05:00.001-07:00

5'10" x 21" x 2 3/8"
Handshaped by Gary Hanel in deepest, darkest Leucadia, California.
Built by the fine folks at Moonlight Glassing.
Volan deck patch.
Glass-on Lowboy keels.
Performance rails and rocker.
This is a stock surfboard for Surfy Surfy Surf Shop.
As they say, "Yew".

A very Surfy surfboard

2012-05-17T15:19:00.001-07:00

Thrash Jazz Concert at Surfy May 26th

2012-05-16T10:10:00.000-07:00

Dear friends of Surfy Surfy,
We are hosting a Thrash Jazz Concert on Saturday May 26th at the shop.
Brick & Mortar Surfy Surfy is 2 years old now so we need celebrate.
You should totally come, it's going to be super duper fun.
thank you and warm regards,
Surfy Surfy

What: Thrash Jazz Concert by Boaz & Friends
When: Saturday May 26th 7pm-10pm
Where: Surfy Surfy Surf Shop. 974 N Coast Hwy 101, Leucadia, CA 92024 map

Current Band Will include:

Boaz Roberts - Guitar bars
Jacob Sherreitt - Drummys
Tim McNalley - Bass attack
Avalon Roberts - Vocal variety and sweet bears

RICKY Giordano has now also joined with his group!
They will be playing the second set! Party!

Maybe more to come so stay tuned..

Event on Facebook

Nice Surfboard

2012-05-15T14:39:00.001-07:00

6'2" Campbell Brothers 5 fin Bonzer "Mini-Merk" model.

Sofia shows us her quiver

2012-05-14T12:26:00.000-07:00

Take that uncle Jared.

R.I.P. Terry Martin

2012-05-12T09:24:00.000-07:00

Terry Martin 1937-2012

There will be a memorial service for Terry on Friday, May 18th at 6:30 PM at Capo Beach Calvary in Capistrano Beach, please join us to say goodbye to our beloved Terry. Your prayers for Candy, David, Josh and Johanna are greatly appreciated at this time.

On Sunday, May 20th from 5-9 PM at the Ocean Institute in Dana Point we will celebrate Terry’s life and his legacy at The Terry Martin Project event,” A Body of Work From Wood to Foam”. This event is a LIVE and silent auction fundraiser hosted by the Sport of Kings Foundation that will provide support to the Martin Family.

Terry Martin Project

Go to the Source

2012-05-12T07:44:00.000-07:00

Duncan Campbell soul carving a 3 fin Bonzer in 1978.
Reap the rewards of 4 decades of research and development,

6'2" Bonzer3 click me

Bonzer Blog Post #404

2012-05-10T07:44:00.000-07:00

6'0" x 21 1/2" x 2 3/4"
Shaped by Malcolm Campbell, one of the most versatile surfboard shapers on Earth.
Built at Moonlight Glassing with 1st quality materials and extras.
5/4 oz s-cloth deck with back foot patch. 5 oz bottom with fin cluster reinforcement patch.
Airbrush, gloss and polish deck and rails, wetsand gloss bottom.
FCS Fusion system and center box for easy travel.
Board includes all 5 fins ($125 value).
This Bonzer has foam, float and drive for all your Surfy needs.
This is the 404th blog post labeled "bonzer"
*update-this board is SOLD, thanks!

Minimalist Quiver wins Korduroy TV Quiver Kontest

2012-05-09T13:38:00.002-07:00

Surfy Surfy's very own Jared Muscat won the staff pick for Korduroy.TV's Show Us Your Quiver contest.

Jared writes,

I shaped the wooden handplane last summer. I call this plane "Ramona." It is 22" x 8 3/4" x 3/4" It is my plane for when Beacons is a mushbugger but I still want to catch waves out the back and weave barrels on the very inside. A good friend calls it the longboard handplane.

The swim fins are the classic Churchill Makapuu Fins, I got big ugly feet thanks to my dad and these are the best fit. Just so happen to provide a good kick as well. I am a bit jealous of Pierce Kavanagh who has one of the original sets of Makapuus, the raddest rubber I have ever seen.

The green & white handplane is an Enjoy Handplane Ed Lewis gave to me a couple of weeks back. I tend to leave the handplanes on the shore if the waves have a good amount of size and are hollow, I feel like those are times when all you need are the fins; but that is not often when you live behind Beacons, thus this handplane is currently my daily go-to.

The bicycle is a Puch 27 1/4" beauty that I lucked into on Craigslist 2 years ago for way less than it is worth. It has ten speeds and I use it daily to get to work, find some fun waves, and grab my farmers market feed. I don't have a car, so this is my main method of transportation for the moment.

The Bonzer is a Russ Short model shaped by Malcolm Campbell I grabbed from Surfy Surfy last fall right before a run of really good north swell. Bonzers are such incredible boards when you have a wave with some depth and speed, just so dependable in the pocket, where it matters most. The Russ Short is my favorite Bonzer because it is one of the first that they used, with its wide-point forward and 3 fin set up, also Russ Short happened to rip. I like the template because of the way you can utilize foot placement to hold simple lines in the barrel. If this board is in arm the reasoning would be to get barreled a lot, thus it doesn't go out often.. It is 6'4" x 20 1/4" x 2 1/2"

The runner up quiver pick is Michael Fraley's impressive group of mostly Christenson small wave speedsters. To read about Fraley's quiver click here.

To see all the quivers visit Korduroy's photo gallery on the Facebooks.

Three Five Four's

2012-05-08T13:49:00.000-07:00

5'4" GH Pill
5'4" Slingerland Spacebar
5'4" Mandala Deep Space Twin

5 fin Bonzer surfboard

2012-05-07T00:12:00.001-07:00

6'0" Campbell Brothers Bonzer 5 fin "mini-merk" model
Shaped by Malcolm Campbell in Oxnard, California.
Glassed at Moonlight Glassing in North San Diego county.
6'0" x 20 1/8" x 2 7/16"
4/4 s-cloth with back foot patch.
Gloss and polish deck and rails.
Wetsanded gloss bottom.
Red airbrush with white pinline on deck.
FCS Fusion system with official Bonzer side fins with proper angle built in.
6.5" True Ames Bonzer center fin included.
Available: clicky click

Billabong XXL Big Wave Awards 2012

2012-05-04T08:18:00.001-07:00

"Yeeeeew!!!" "ARRRRGH!!!" "WHOOOoooooo!!!"
See all the videos and watch the live broadcast of the award ceremony click: www.billabongxxl.com

Nice Quiver

2012-05-03T20:24:00.003-07:00

Christopher Devoy posted this quiver shot on our Surfy Surfy Facebook wall. Good stuff!

Slingerland Shapes Spacebars

2012-05-02T11:45:00.000-07:00

Crafty guru Mike Slingerland shapes Spacebar surfboards for Surfy Surfy in Encinitas, California.
This is one is 5'6"x 21 1/4" x 2 1/2"
The Spacebar is the Surfy Surfy version of the Mini-Simms concept.
Features includes a thinned out forgiving rail that won't punish mistakes. A subltle bottom of single to vee to single bottom for speed and agility. Beachbreak friendly nose rocker.
The quad makes it zippy and user friendly backside. FCS Fusion system shown here with RFC R1 R4 fins, rear fins are double foiled which will eliminate speed wobbles because these puppies are fast!
1st quality 4/4 oz glassing with a volan deck patch and a gloss finish by Moonlight Glassing so it's light enough but won't fall apart.
This board is available via the Surfy Surfy online store: clicky
Here is a 5'0" stock we got fer shale online: clicky
Here is a very slightly used 5'2" Spacebar that is a score: clicky

GH PILLS

2012-04-30T16:49:00.001-07:00

Red: 5'0" x 20 1/2" x 2 3/8"
Blue: 5'4" x 20 3/4" x 2 1/2"
Green: 5'8" x 21 1/4" x 2 11/16"
Handshaped by Gary Hanel in deepest darkest Leucadia, California.

The Terry Martin Project

2012-04-30T08:02:00.002-07:00

The Terry Martin Project: A Body of Work from Wood to Foam
Sunday May 20, 2012 5-9 pm at the Ocean Institute in Dana Point, California.
Only 400 tickets available.
www.terrymartinproject.com

Korduroy's "Show us your Quiver" contest

2012-04-29T18:10:00.003-07:00

Hey there Instragrammers, tag your quiver shot with #showusyourquiver and the crew at Korduroy.tv might award you with swag.
More info at www.korduroy.tv/blog/2012/showusyourquiver
And remember, there is bonus Surfy content on the Surfy Surfy Instagram and Facebook.

Dial in your Nubsters

2012-04-28T19:49:00.000-07:00

Dial in your fins by Korduroy.tv
Hosted by Sean Mattison.
Nubsters available via the Surfy Surfy online store: clicky clicky

Custom 5 fin GH Pill

2012-04-27T11:43:00.001-07:00

The first Bonzery Pill from Gary Hanel.
5'7" x ? x ? Summer mush beware!
Color work by Peter St Pierre.
Another fine build by the crew at Moonlight Glassing.