Switches Indicators & Gauges

Hydrostatic Level Transmitter

indicatorgauge — Mon, 28 Jun 2010 02:38:49 +0000

Hydrostatic level transmitters are designed for depth/level measurements in deep wells, groundwater, rivers, water towers, sewage treatment plants and other similar applications. They are a form of two-wire level transmitter that consists of a probe (made from stainless steel) and a special breathing cable (containing a capillary pipe) and a stress resistant inlet. Hydrostatic level transmitters [...]

Guided Microwave Level Transmitter

indicatorgauge — Wed, 09 Jun 2010 02:23:48 +0000

Guided Microwave level transmitters are designed for continuous level measurement. They have a very versatile range of applications and are suitable for use in both liquid (including corrosive liquids) and solid products. Even conditions such as steam generation, density fluctuations and changes of the dielectric constant do not influence the accuracy of the measurement. This is [...]

Bulksolids Flow Sensor

indicatorgauge — Sun, 16 May 2010 23:37:26 +0000

Bulksolids Flow Sensor is a microwave based non-contact solids flow sensor. It utilizes the Doppler Effect to detect the movement of solid materials (such as powders and granules) in pneumatic pipelines. These sensors are very low cost and reliable which makes them ideal for monitoring the flow of bulk solids in vacuum pipelines, ducts, air [...]

Blocked Chute Detection

indicatorgauge — Tue, 11 May 2010 02:02:57 +0000

Process Automation Blocked Chute Detectors are used to detect blockages in process chutes. The spillage of hot or corrosive materials can cause blockages that are essential to be detected the potential blockage before it occurs. The material build up on the side of the chutes is detected as an early indication that the safe functioning [...]

NivoCONT

indicatorgauge — Wed, 14 Apr 2010 03:35:04 +0000

The NivoCONT is a contact style level switch which is based on the conductivity principle. The NivoCONT is primarily design for use in liquids for pump control. How they work: The NivoCONT contains probes which are immersed into the tank. These probes work as contacts for an electric circuit. A connection is then established between the probes [...]

NivoFloat

indicatorgauge — Thu, 01 Apr 2010 00:31:57 +0000

The NivoFloat is a type of level switch made from polypropylene. It is a level switch from drinking water to sewage, however it can also be used from tanks and basins. The NivoFloat operates using the float position which triggers the gravitational force which operates an indicator microswitch. The NivoFLoat is molded with a double chamber [...]

Blast Furnace Radar

indicatorgauge — Tue, 09 Mar 2010 22:31:14 +0000

A Blast Furnace Radar is a microwave range finder that consists of a controller, a guide pipe and an antenna. It is important to control the distribution pattern of charged raw materials to ensure a more stable operation and improve the reaction efficiency. MWS-20RF-2H The main advantage of the Semrad Pty Ltd blast furnace radar MWS-20RF-2H is [...]

Universal Process Controller & Indicator

indicatorgauge — Mon, 08 Mar 2010 22:35:26 +0000

Process control is a statistics and engineering regulation that deals with structural design, mechanisms, and algorithms for controlling the output of a specific process. General process controllers have always been high cost items, however, Semrad Pty Ltd have created the Unicont PM-300 series; universal process controllers incorporate at an affordable price. Features Features of the Unicont PM-300 [...]

Hot Metal Detector

indicatorgauge — Tue, 23 Feb 2010 03:29:22 +0000

MWS-ST/SR-2WG Micro-Gunn MWS-ST/SR-2WG Micro-Gunn producded by Semrad Pty Ltd was developed as a substitution for infrared hot metal detectors (HMD), laser/optical barriers and gamma ray sensors for product tracking in steel mills. MWS-ST/SR-2WG Micro-Gunn consists of a pair of transmitting and receiving antennas, connected to separate controllers by circular wave guide tubing. The detection signal outputs when [...]

Foam Detect and Level Monitor

indicatorgauge — Tue, 23 Feb 2010 03:03:30 +0000

Foam Detect and Level Monitor, otherwise known as Charis, have been designed and distributed across Australia by Semrad Pty Ltd since 1994. Foam Detect and Level Monitor created by Semrad Pty Ltd are designed uniquely for foam (Please note that some other manufactures simply modify liquid sensors. These sensors will not be as effective) One of the [...]