Talking Nerd with Woody

Swype for iPhone

2013-03-09T09:30:00.001-07:00

So when I transitioned from Android to iPhone I immediately went on the hunt for those apps I had grown accustomed to on my old Android device. For me, possesing fingers that are, lets say, not so device keyboard friendly Swype was a very useful tool. Swype, in a very junk version can be purchased in the apple app store. Don't waste your time or money. It can only swipe a note or a new message it does NOT replace the keyboard and become a useful tool throughout your iPhone.

First you must jailbreak your iPhone. See my blog here for instructions on doing so (at your own risk of course).

now on to the good stuff!

Installing iSwipe

Launch Cydia
Click Manage
Click Sources
Click Edit
Click Add
Add the following URL source: http://cydia.myrepospace.com/wyndwarrior
Once the source has been added and updated do a search in Cydia for iSwipe
There install iSwipe

Enjoy!

Jailbreaking 6.1.2

2013-03-09T09:13:00.001-07:00

There are plenty of posts out there on jailbreaking your iphone and this is just one of them. However, since I have successfully jailbroken an iPhone 4s iOS 6.1.2 using Envasi0n I figured I would share.

Be sure to first backup your iPhone using these instructions.
Create a folder called Pwnage on your desktop
Download Evasi0n from here .
Extract the Evasi0n zip file to the Pwnage folder on your desktop.
Remove any lock screen passcodes on your device
Double click the newly created evasi0n-win folder to open it.
Make sure your iPhone is connected via USB cable.
Right click the Evasi0n icon and select Run as Administrator from the context menu to launch the app.
The app will retrieve information from the device to generate jailbreak data, inject stage 1 jailbreak data, reboot the device, wait for the device to be ready, inject stage 2 jailbreak data, upload Cydia, and upload the Cydia packages list.
You will next be asked to unlock your device and tap the new 'Jailbreak' app icon. It is imperative that you only tap the icon once. The app will open and immediately close.
Evasi0n will then inject the remount payload, remount the root filesystem, prepare the final jailbreak data, inject the final jailbreak data, and complete!

Open NAT for you XBOX Live connections.

2012-01-02T16:34:00.000-07:00

I have seen plenty of chatter of this subject, with sporadic answers so I will attempt to get this communicated properly. Most routers now have UPnP (Universal Plug and Play) which can solve most of your NAT (Network Address Translation) woes. DMZ (Demilitarized Zone) vs. Port Forwarding vs. Port Triggering, what does this all mean? Setting a static IP on your XBOX and placing that IP in the DMZ setting will put your XBOX outside of your routers firewall. This will speed up connections as the traffic to and from your XBOX will not pass through the firewall, however your XBOX will be outside the firewall. Port forwarding to that very IP will again improve the communication times.

Which approach should I take and why?

(note: This information is designed as a general guide and assumes a certain level of technical competence and familiarity with routing functionality. For details on your specific router please consult your router manufacture.)

First take note of the XBOX ports:

88 UDP

3074 Both (UDP & TCP)

53 Both

80 TCP

1863 Both

If you have a single XBOX, a router that does not support UPnP, then you will probably want to put your XBOX in the DMZ and turn on port forwarding.

Set a static IP in your router for your XBOX
Navigate to your DMZ settings in your router.
Enable DMZ
Select ANY or ALL Source IPs
Enter the static IP you set in step 1 as the Destination IP.
Navigate to your router's port forwarding.
Using the guide above create entries for each port mentioned, forwarding to the static IP created in step 1 and enable each entry.

My router supports UPnP.

Typically in your routers administrative section, enable UPnP
If available 'Allow users to configure UPnP' and 'Do Not Allow Users to Disable Internet Access'
In Security and/or Firewall settings Enable or Allow: Filter Anonymous Internet Requests, Filter Multicast, Filter IDENT (Port 113) and Disable or Block Filter Internet NAT Redirection.

This may or may not be enough to solve communication/host related NAT issues. In some cases after enabling UPnP you may have to also configure port forwarding. It is possible to configure port forwarding to an XBOX not in the DMZ just following the steps above excluding the steps for the DMZ.

But I have two XBOXes/My pals come over with their XBOXes and they have NAT issues, how do I foward the ports to their XBOX as well?

Port Triggering is your answer.

Navigate to your router's port triggering settings
Create and enable entries from and to the port ranges listed above.

When traffic hits the ports the router will remember the IP address of the device and route the traffic accordingly.

I recommend setting static IPs on your XBOX(es), Enabling UPnP, and Enable Port Triggering. This will solve your NAT woes, and when your pals come over with their box they will be clear of the issues as well.

Game on!

Installing Testlink on Windows Servers

2011-07-29T08:10:00.001-07:00

Greetings everyone,

Like many I have the need to implement a test case management suite. Being knee deep in MSDN licensing there isn't a need to stand up a new linux box or install apache on a windows server that already has IIS installed.... So for those of you wrapped in windows here's a walkthrough for standing up Testlink on your windows box.

Download latest testlink from http://sourceforge.net/projects/testlink/files/TestLink%201.9/TestLink%201.9.3/testlink-1.9.3.tar.gz/download
(2003 or 08 servers) Using the web platform installer install the latest version of php from http://blogs.iis.net/bills/archive/2006/09/19/How-to-install-PHP-on-IIS7-_2800_RC1_2900_.aspx
Windows 7 - Download the latest version of php from http://www.windows.php.net/downloads.php
Extract php to c:\php5
Add to your path the location of your libmysql.dll
Update your php.ini file

Enable mysqli extension
Set the extensions dir

extension_dir = "ext"

set the max execution time

max_execution_time = 120

set the default socket timeout

default_socket_timeout = 86400

Configure IIS

Start --> Control Panel -->Programs -->Turn Windows Features on or off and check on the Internet Information Services entry.

Activate the World Wide Web Services/Application Development Features/CGI node and also Web Management Tools/IIS Management Console

Restart iis - iisreset from a command prompt
Start the IIS Management Console

Double click the Handler Mappings
Click Add Module Mapping on the right column
In the Add Module Mapping dialog

Request Path = *.php
Module = FastCgiModule
Executable = c:\php5\php-cgi.exe
Name = PHP
Click yes to create a FastCGIApplication

Install MySQL

Be sure to run the MySQLInstanceConfig.exe to configure server settings

Run the Testlink installer http://localhost/testlink

Once you have configured and secured Testlink and MySQL your ready to go!

Syncing your Itunes library with your android phone.

2011-07-07T19:13:00.000-07:00

So you want to sync you itunes library with your android device?

First, download itunes agent.

After install the application runs in the system tray.

Plug in your android phone using your USB cable. (note: if your android phone prompts you for a connection type select to use as a Disk Drive)

Open the drive from your computer and create a folder called Music.

Click the iTunes Agent icon in the system tray and select preferences.

Leave all Agent check boxes checked

Provide a name. e.g HTC Incredible 2

Select iTunes as the Synchronize pattern

Click Choose to select your Music Folder (this is the Music folder you created on your phone. When selected it will be displayed as "Music" in the Music folder field)

In the Recognize by folder/file field select the Music folder again on your phone. This will create a .ita file that directs iTunes Agent to the folder to sync with.

I Use device name to Associate with playlist as it helps keep iTunes clean.

Click Save

Next launch iTunes and you will see Devices in your playlists. Copy the music you wish to have on your phone to the playlist.

Open the iTunes Agent and Synchronize Devices

Next step is on to your phone.

I prefer Cubed for Android (also known as 3) but your mp3 player is entirely up to you!

Enjoy!

Using Client Certificate with SoapUI

2011-06-17T13:36:00.001-07:00

After hunting around on this process a bit myself I've ironed out the details so you don't have to.

Important notes for importing your certificate:

Double click the client certificate
Click Next on the Import Wizard
Click Next on the file import screen
Type your private key password
Check the "Mark this key as exportable. This will allow you to back up or transport your keys at a later time." checkbox.
Click Next
Click Include all extended properties
Click Next
Click Next to Automatically select the certificate store
Click Finish
Click OK on the Import confirmation dialog

Next export your client certificate so it can be used by SoapUI

Export your client Certificate
Click Start
Type MMC and press enter
Click File and select add/remove snap-in
Select certificates from the Available snap-ins column
Click Add
Select My User Account
Click Finish
Click OK on the Add or Remove Snap-ins window
Expand Certificates - Current User
Expand Personal
Click Certificates
Select the desired certificate
Right Click the certificate and select All Tasks
Click Export
Click Next on the Welcome screen
Click Yes, Export the private key
Click Next
Click Personal Information Exchange - PKCS #12

Check Include all certificates in the certifcation path if possible.
Check Delete the private key if the export is sucessful
Click Next
Enter the cert password
Enter the cert password (password confirmation)
Click next
Select a name and location for the cert to be saved
Click save
Click Next
Click Finish
Click ok on the Confirmation dialog

Next set your SoapUI Configuration file

Open "C:\Program Files\eviware\soapUI-3.6.1\bin\soapUI-3.6.1.vmoptions" in a text editor
Add the follow line the end of the file
'-Dsun.security.ssl.allowUnsafeRenegotiation=true'Save the file

Open SoapUI

Expand the File Menu

Select Preferences

Click SSL Settings

Set the following settings:

keystore: path to your certificate
password: self explanatory
Check the 'Require client authentication' box
Click OK

That's all that's to it! Create a new project with your webservice and test away!

Mecury Quality Center 9 & Internet Explorer 8.0

2011-06-09T14:40:00.001-07:00

Anyone spending any time frustrated with Quality Center understands the corporate hesitation in the exorbitant expense of Quality Center 10 and the lack of support for any browser beyond Internet Explorer 7 in Quality Center 9. In attempt to put a rest to your futile efforts clicking search result after search result I have compiled my research into one location.

Internet Explorer 7.0 is the latest browser supported by Quality Center 9.0. Therefore it is necessary to utilize compatibility mode as well as modify security settings in Internet Explorer 8.0 for the application to function properly.

Launch IE 8
Expand the Tools menu
Click Compatibility View Settings
Uncheck Display intranet sites in Compatibility View if checked.
Enter <YOUR MERC SERVER> into the Add this website edit box
Click Add
Click Close
(You should now be prompted to Install Mercury Quality Center 9.0
If so skip to step 17.)
Expand the Tools menu again
Click Internet Options
Click Internet Options
Click the Advanced Tab
Locate the Security Section
Click Reset to Reset IE’s settings to their default condition.
Click OK
Restart Internet Explorer
Navigate to your Mercury Quality Center url.
Click Install to install Mercury Quality Center 9.0

Option 2 (If persistent issues with IE8 or the above fails to install Quality Center):

Download the Quality Center Explorer from ftp://ftp.itrc.hp.com/applications/qualitycenter/qc90/others/qcexplorer/QCExplorerAddIn.exe
When prompted to save QCExplorerAddIn.exe click Run
Accept the default installation directory
Click Next
Click Start
Click All Programs
Expand Quality Center
Click QC Explorer
In the Address bar enter the address to our Mercury Quality Center instance
Click Go

After all necessary components are downloaded you will be prompted for your login credentials.

Enjoy! Keep on Nerdin'

Proform XP 615 Trainer treadmill calibration

2011-06-05T09:26:00.001-07:00

The Proform XP 615 Treadmill project started a couple months ago. With the wife back in school I had to come up with some way to continue a running routine whilst not being a neglectful parent. Being a firm believer in: There's someone, somewhere, that bought it, let it collect dust, and is willing to practically give it away. I began a brief search for that individual. I found her at a garage sale, seven months pregnant, and offering a the profrom 615 for 50 bucks. Inch of dust and 300 miles on it, we took her home (the treadmill, not the pregnant gal).

After a few runs and re-calibration of my Nike+ sensor, I began the hunt for the calibration procedure for the treadmill. So you don't have to here it is:

Calibrating the Proform XP 615 Trainer Treadmill

Follow these steps to calibrate your Proform XP series treadmill.
WARNING: DO NOT STAND ON THE TREADMILL BELT

Remove the Motor Cover by removing the three screws on the front of the unit.
Locate the MAX SPD potentiometer (pot) on the motor control board. This is the board the red and black motor wires connect to. The MAX SPD pot should be labeled. Mine wasn't however, there is only one potentiometer on the board. It is a small square box that has a phillips head on it.
Press and Hold the STOP and SPEED UP button while inserting the safety key.
Press SPEED UP button to display setting (See Calibration sheet below) Your concern here is the SPD - Maximum Speed setting (default may be 10)
Press the STOP button to advance to Level 2 Calibration Mode
Press the the INCLINE UP button to begin incline calibration (this calibration is automatic)
Press and hold the SPEED UP button until the distance window displays 85%. (The actual speed will be displayed)
Press the SPEED DOWN button and allow the treadmill to stop
Using a small insulated screwdriver adjust the potentiometer clockwise to speed up and counter-clockwise to slow down the max speed of the treadmill. A tiny turn of this potentiometer will make a huge difference in speed, so use care when making adjustments.
Complete steps 3, 5 then 7 - 9 to adjust the speed as necessary.
It is not important to get the speed set exactly at the max speed of the treadmill but do make sure to get the speed within .2 MPH of the max speed of the treadmill.
Press SPEED DOWN to complete the calibration.
Press the Stop key once and remove the safety key.

ProformXP615 Manual

Calibration Mode

Talking Nerd

2011-06-05T08:26:00.000-07:00

Ok so after a long sabbatical from blogging, tweeting, and posting random useless junk on a website. I have finally decided to begin to document what the wife refers to as 'talking nerd'. Typically derived from a project, that led to a web search, that led to another, that led to a link, a document and a process to complete some task that someone failed to simply put in one place. That's the beauty of the internet. Everything you need scattered over thousands of sites and if your good a puzzles you can get it together.

Welcome to the birth of 'Talking Nerd with Woody'.