Technical Info

Network Printer Set Up

noreply@blogger.com (Information) — Sat, 07 Aug 2010 04:56:00 +0000

1. Go to Start button, then click Control Panel,go to Printers and Faxes then click , then click Add Printer.
2.open a new Add Printer Wizard window option . Then click Next to start.
3. Select a Local printer and attached to this computer. Make sure Automatically detect and install my Plug and Play printer is NOT checked.

4. Then click Next to continue.

5. Then you will create a new port for your network printer. Select Create a new port.
6.Beside Type of Port.
7. click on the down arrow, then click on Standard TCP/IP Port.
8.Click Next to continue.
9. Now type your printer's IP Address in the Printer Name or IP Address field.
10.Port Name will automatically be filled when you enter the IP Address.just care Do not change the Port Name.
11. Click Next to continue.
12. Then you will see the screen on the right. This means that the IP Address for the printer is NOT available on the network. Now select the Back button and make sure you entered the correct IP Address. Check to see that your network printer is powered on and displays a 'ready' status.
13.Windows XP will scan the network to find your printer's IP Address. This may take a few seconds. Select Finish to continue.
14.You must now select the printer's manufacturer and model. Windows XP will automatically select the detected manufacturer and printer driver. Normally, you will not have to change this selection.
15. OPTIONAL: If your printer is listed but you have more than one printer model to choose from, please select the model with PS, if available.
16. IF your network printer is NOT automatically detected, select the Windows Update button to find the proper software drivers.
17. You will be prompted to confirm the selected printer driver. Make sure Keep existing driver is selected, then click Next to continue.
18. You will be prompted to assign the printer a Name. You can use the default name, or add more info to indicate the printer location, such as My Office, Hallway, Foyer, Room 222, etc.
19. Select Yes if you want to use the printer as the default printer. Click Next to continue.
20. You will be prompted to share the network printer. Do NOT share the network printer.

21. Click Next to continue.
22. You will be prompted to print a test page. Select Yes, then click Next.

23. Check your network printer to make sure your page printed. Select Yes when prompted to confirm a successful test page.

24. Click on the Finish button to complete the Add Printer Wizard.
thanks: http://uis.georgetown.edu/software/documentation/winxp/winxp.network.printer.html

keyboard shortcut for winxp

noreply@blogger.com (Information) — Tue, 22 Jun 2010 04:11:00 +0000

Shortcut Keys Description
F1: Help
F2 Renames selected Icon
F3 Starts find from desktop
F4 Opens the drive selection when browsing
CTRL+ESC: Open Start menu
ALT+TAB: Switch between open programs
ALT+F4: Quit program
SHIFT+DELETE: Delete item permanently
Windows Logo+L: Lock the computer (without using CTRL+ALT+DELETE)
Ctrl + (the '+' key on the keypad): Automatically adjust the width's of all the columns in Windows explorer
Ctrl + Backspace: Delete word to the left of cursor
Alt + E :Edit options in current program
Alt + Enter :Opens properties window of Selected icon or program
Alt + Esc: Switch Between open applications on taskbar
Alt + F: File menu options in current program
Alt + F4: Closes Current open program
Alt + Print Screen :Copies active window to the clipboard
Alt + Shift + Tab: Switch backwards between open applications
Alt + Tab: Switch between open applications
Ctrl + A: Select all text
Ctrl + C :Copy highlighted text, data, or image
Ctrl + Del: Delete word to the right of cursor
Ctrl + End: Goes to end of document
Ctrl + Esc: Bring Up start button
Ctrl + F4 :Closes Window in Program
Ctrl + Home: Goes to beginning of document
Ctrl + Insert: Copy selected item
Ctrl + Left arrow: Moves one word to the left at a time
Ctrl + Right arrow :Moves one word to the right at a time
Ctrl + V: Paste
Ctrl + X :Cut selected item
Ctrl + Z :Undoes a previous action
End Goes to end of current line
CTRL+Z: Undo the last command
BACKSPACE: Switch to the parent folder
SHIFT+click+Close button: For folders, close the current folder plus all parent folders
Press SHIFT five times: Toggles StickyKeys on and off
Press down and hold the right SHIFT key for eight seconds: toggles FilterKeys on and off
Press down and hold the NUM LOCK key for five seconds: Toggles ToggleKeys on and off
Left ALT+left SHIFT+NUM LOC :Toggles MouseKeys on and off
Left ALT+left SHIFT+PRINT SCREEN: Toggles high contrast on and off
Windows Logo+L: Log off Windows
Windows Logo+P: Starts Print Manager
Windows Logo+C :Opens Control Panel
Windows Logo+V :Starts Clipboard
Windows Logo+K :Opens Keyboard Properties dialog box
Windows Logo+I :Opens Mouse Properties dialog box
Windows Logo+A:Starts Accessibility Options (if installed)
Windows Logo+SPACEBAR :Displays the list of Microsoft IntelliType shortcut keys
Windows Logo+S: Toggles CAPS LOCK on and off
SHIFT+TAB: Move to the previous control in the dialog box
SPACEBAR :If the current control is a button, this clicks the button. If the current control is a check box, this
ENTER: Equivalent to clicking the selected button (the button with the outline)

Install & Configure a Network Card

noreply@blogger.com (Information) — Fri, 04 Jun 2010 03:44:00 +0000

-- best support centre

Locating the Expansion Slots:
1. Place the open computer frame on its side with the motherboard facing up. This means you can see the motherboard from a bird's eye view. The motherboard is the biggest board you can see within the frame. It usually covers an entire side and has other smaller boards sticking up from it.
2. Looking at the motherboard, try to locate the expansion slots. Expansion slots are either long black strips or short white strips that look like Lego blocks standing up. ISA slots are black. PCI slots are white. Open slots are those that do not have other boards inserted in them.

Installing Your New Card:
1. Determine which interface (ISA or PCI) your card uses. ISA is long and the gold contacts are large. PCI is much shorter and smaller.
2. Next, check to see if the expansion slot opening next to the slot is covered. If it is, remove the cover by unscrewing it from the frame or popping it out. (IMPORTANT: Keep the screw and the slot cover.) If you have a new case that has slot covers built in you will have to remove them manually with a screwdriver. Please refer to your user manual for details.
3. When the slot cover has been removed, insert your card into the expansion slot on the motherboard. Press firmly so the entire part of the card that has the gold contacts goes completely into the expansion slot on the motherboard and will go no further. Do not use any tools to try to hammer the card in if it does not fit.
4. Make sure the side of the card resembling the expansion slot cover you just removed is covering most of the open slot.
5. Screw the card into place with the screw you removed from the expansion slot cover or a new screw.

Replacing the Case:
1. After confirming the proper placement of the card, make sure you did not leave any tools or screws within the computer. Replace the case and screw it back in place.
2. Reconnect all the cables to their proper places.

Booting Up:
1. Turn on the power.
2. Refer to your user's manual to install the proper drivers from the disk(s) that came with the card.
3. Refer to the section setting up and configuring your computer for ResNet for the settings you will need to access ResNet.

About any pc information visit populer site my favorite
source :http://www.5starsupport.com/tutorial/network.htm

How to Connect a Printer to a Computer

noreply@blogger.com (Information) — Mon, 31 May 2010 03:33:00 +0000

1. Click Start menu down the bottom left.
2. Click Printers, if you cannot see printers and faxes click start, then settings and you should see printers and faxes there.
3. The next screen should appear and you will see your printer.
4. Right click your printer and click properties
5. The following will appear, next to the general tab click on sharing.
6. This is where you create your share name for your printer. Click on the radio button that says share this printer.
7. This is the unique name you create for your printer to be shared on the network, so make sure it is something simple and easy to remember. I have used “Dellprinter” for this example. This is case sensitive meaning you have to write exactly where you have put capital letters and lower case letters.
8. Then simply click ok, your printer is now shared.
9. Now for your network to access the printer you need to follow these steps.
Figure out your computer name, so simply right click my computer on your desktop and click properties.
10. The following window will appear.
11. Next to the general tab click computer name.

12. From here click on the change button down the bottom right.
13. You will then see your computer name, write this down somewhere so you don’t forget.
14. Click start down the bottom left
15. Then click on printers and faxes again if you cannot see it click on start, settings then printers and faxes.

16. The following window will appear on the left hand side you will see add a printer. Single click on that icon.
17. Hit the next button.
18. By default it selects local printer attached to this printer, you need to select the radio button which says a network printer, or a printer attached to another computer.
19. Once you have selected a network printer click next at the bottom right.
20. Select the radio button that says connect to this printer.
21. For the name this is where your computer name goes as well as the printer share name we created earlier. So I would type \\Deano\Dellprinter, Yours would be \\computername\shareprintername. This is case sensitive remember type it exactly how you wrote it down.
21. Once you have typed in your correct computer name and printer name hit the next button, if for some reason it pops up with a username and password just enter your username and password you use to log in to windows with.
Finshed , You have now successfully added a network printer!

source: http://www.computergeeksonline.net/Basics/add-network-printer.asp

How to Recover forgotten Windows xp password

noreply@blogger.com (Information) — Sat, 29 May 2010 07:10:00 +0000

Forgot Windows XP Password

There are two ways, which you can use to reset the forgotten Windows XP password. I have used both the both the methods at different times, when I forgot my Windows XP password. Both of them proved to be useful.

Forgot Windows XP Password - User Password

When we install Windows on our machine, it automatically creates a default account with the name ‘Administrator’ and sets it password to blank. To reset the user password that you have forgotten, start the system and when you see the Windows Welcome screen or the login scree, press CTRL+ALT+DEL keys twice.
With this the classic login box will appear.
Now you will make use of the Administrator account, that the system had created by the machine. Type in Administrator in the Username text box and leave the password field blank. Then press enter.
With this you will be able to log into the system. Now is the time to reset the forgotten Windows XP password.
Go to the Control Panel and from their go to User Accounts and change the password from the option reset password. If you start the machine in the safe mode, you will use the same steps.

Forgot Windows XP Administrator Password

If you have forgotten the Administrator password, you have a longer procedure to follow. You will need the Windows XP setup CD for the same. Boot the system using the Windows XP setup CD and follow the instructions, like accepting EULA, etc.
You will come to an option, where the system will ask you to repair existing Windows installation. Accept it and then press the ‘R’ key to run the repair version.
When you press the ‘R’ key, the system will under take the repair Windows.
Once the repair is done, the system will restart. When the system restarts, do not press any key, even if the system says ‘Press any key to continue...’. If you press any key, the setup will start from the beginning, but if you do not press any key, the set up will resume, from where it left.
Keep an eye on the screen, when you see ‘Installing devices’ on the progressbar, press Shift + F10 keys on the keyboard.
With this the Command Prompt window will appear.
Type nusrmgr.cpl on the command prompt and press the Enter key.
With the ‘User Accounts’ window will appear, now you have the option of either removing or resetting the password.
There are also some utilities, that are available in the market, that you can make use of. Once you forgot Windows XP password and have it reset, you will realize, it is not as difficult a task, as you had thought it to be. However, this also means, that your system is not safe, as you would really want it to be. Maybe Microsoft will take some time to overcome the loophole.

source: http://www.buzzle.com/articles/forgot-windows-xp-password-how-to-reset.html

CHIP IMPLEMENTED INTO MAN GETS COMPUTER VIRUS

noreply@blogger.com (Information) — Thu, 27 May 2010 03:55:00 +0000

Researchers have found that implanted identity chips can pick up computer viruses.
Reading University's Mark Gas son conducted an experiment to show how radio frequency identity (RFID) chips could become electronically infected.
He explained to Rory Cellan-Jones the risks involved with the new technology including its effects on medical implants such as pacemakers.
if you want to more visit --source : http://news.bbc.co.uk/2/hi/technology/10159315.stm

HOW TO INSTALL NEW FONT

noreply@blogger.com (Information) — Tue, 18 May 2010 04:30:00 +0000

Download a font file from a website like www.styopkin.com , www.dafont.com and many sites.
Then go to - start menu and click- Control Panel
Then go to Font icon-click on fonts icon .
open the file menu - Click Install New Font
Then you will see add font window.

Then browse the font file which you will need
select the file & click
Now you will see your New Font on a Windows xp

HOW TO DISABLE UNUSED STARTUP PROGRAMS

noreply@blogger.com (Information) — Mon, 17 May 2010 07:44:00 +0000

Now Many software without users permission unnecessary programs can be run every time when you turn on your computer .That's why you will see your physical memory most of the spaces fulfill by some unnecessary programs ,& your computer will become slower than other computer .

How can Disable Start up unnecessary programs In Windows XP

step-1:Go to start menu program ,click the run program -open the run program.
step 2:Type MS CONFIG into the run program and click OK
step 3: Then you will see System Configuration Utility window - select START UP button&c heck & uncheck boxes of the programs,you should check your unnecessary programs & disable such programs.
step 4: Then close the Utility window & restart window.

HOW TO FORMAT A HARD DRIVE

noreply@blogger.com (Information) — Sat, 15 May 2010 05:43:00 +0000

Format a Hard Drive :

1.If you want format a hard drive with Windows XP or windows 2000, insert Windows CD into CD ROM/DVD ROM drive and restart your computer.
2. computer should automatically show boot from CD to the Windows setup Menu.
3.Then show Setup page, & press ENTER.
4. Press F8 to accept the Windows XP License Agreement.

5.Then you will show repair option , ESC option.
6.press ESC-Use the arrow keys & select the-> c:\, D:\ ,E:\,F:\partition.where you want to format & set up operating system.
7. IF you want to delete partion - Press D to delete an existing partition & If you want to create
partion press C to create a new partition.
8. Then type the size in MB/GB which you want to use for the new partition.
9. then you choose file system NTFS/FAT ,Select the format option press F.
10.You show Windows Setup program 1st formats the partition,then you will see installing process-follow the instructions which is appear on the screen to continue installing Windows.

HOW TO INSTALL WINDOWS MS OFFICE2007

noreply@blogger.com (Information) — Tue, 11 May 2010 04:30:00 +0000

System Requirements..Operating Systems:Windows 2000 SP 4, Windows Server;Windows XP Sp 2; WindowsXP Sp3,Windows Vista Sp 1.

Features of ms office 2007:

How to Install Microsoft Office 2007 :

Place the disk in your CD
ROM
/DVD ROM drive
Enter your 25 Character Product-Key
if you entered Product-Key incorrectly then you will see a bold red tick .Do not worry just double check enter your
correct
25 Character Product-Key.
Then you will see "chose the installation you want -- INSTALL NOW / CUSTOMIZE"
then you see installation progress.
then you will see "Microsoft Office 2007 should have been successfully installed"

FIND OUT MORE INFORMATION ABOUT UPDATE VERSION MS OFFICE2010

How To Make Your Computer Faster

noreply@blogger.com (Information) — Sat, 01 May 2010 02:51:00 +0000

How To Make Your Computer Faster :
If you want to your computer much faster than other computer . I have great way for" How To make your Computer Faster". This blogs try to help you how to increase your processing speed of your personal computer.

De fragment your computer hard disk using software like Smart De frag ,Tune up,
A shampoo Magical De frag .
Go to run program Clean up hard disk space being taken up by temp files.
Go to run program & select all prefetch files., simply delete pref etch files.
Start up programs, go to MS CONFIG utility-find unused start up programs& disable unused start up programs.
Clean & optimize your bad registry files using software like Tune up.
Removes unused files from your system.
Remove unused and old entries, File Extensions, Active X Controls, Class Ids, Program IDs, Uninstallers, Shared DLL s, Fonts, Help Files, Application Paths, Icons, Invalid Shortcuts and more... also comes with a comprehensive backup feature. best using by CCleaner.
Clean properly Recycle Bin, Recent Documents, Temporary files & Log files.

Cleans Internet browser's Temporary files, history, cookies, download history, form history.

Great experience windows 7

noreply@blogger.com (Information) — Thu, 29 Apr 2010 17:28:00 +0000

Great experience ---

It is collection of new extra features which is help users how use devices which connected to their personal computer .it is the great new experience for windows operating system users .i think it is better than windows vista . It is really surprised by its speed and performance. Great Job Microsoft.

Actually Windows 7 performs better than Windows Vista but their both hardware configuration same .

The system requirements

1 GHz or faster 32-bit -x86 or 64-bit -x64 processor
1 GB of RAM 32-bit /2 GB of RAM 64-bit
16 GB of available disk space 32-bit / 20 GB 64-bit
DirectX 9 graphics device.

Microsoft Windows 7 has been officially has announced the memory requirements. MS recommends a minimum of 1 GB RAM for 32-bit versions users of the operating system and a minimum of 2 GB for 64-bit versions users.

If you have any experience in windows 7 please share this----->

start blog

noreply@blogger.com (Information) — Sun, 25 Apr 2010 07:54:00 +0000

This blog will try to help your solve pc problem .how to use your computer ,how to handle your pc problems ,this blog try to help any technical problems.if u share Ur technical knowledge plz comments.

Technical Info

Network Printer Set Up

keyboard shortcut for winxp

Install & Configure a Network Card

How to Connect a Printer to a Computer

How to Recover forgotten Windows xp password

CHIP IMPLEMENTED INTO MAN GETS COMPUTER VIRUS

HOW TO INSTALL NEW FONT

HOW TO DISABLE UNUSED STARTUP PROGRAMS

HOW TO FORMAT A HARD DRIVE

HOW TO INSTALL WINDOWS MS OFFICE2007

How to Install Microsoft Office 2007 :

Place the disk in your CD

ROM

Enter your 25 Character Product-Key

if you entered Product-Key incorrectly then you will see a bold red tick .Do not worry just double check enter your

correct

Then you will see "chose the installation you want -- INSTALL NOW / CUSTOMIZE"

then you see installation progress.

then you will see "Microsoft Office 2007 should have been successfully installed"

How To Make Your Computer Faster

Great experience windows 7

start blog