Here are some simple methods to resolve the NVIDIA graphics driver incompatible with this version of Windows error message.

1. Make sure your computer has an NVIDIA graphics card

You should first make sure your computer has an NVIDIA graphics card.

1. Press the Windows Key + R button, type dxdiag, and press Enter.

2. Switch to the Display tab on the DirectX Diagnostic Tool.

3. Check the Manufacturer. If it shows NVIDIA, then you have an NVIDIA GPU. If it shows AMD, you are trying to install the wrong driver.

2. Reinstall the NVIDIA Graphics Driver

If you have an NVIDIA card, you should reinstall the NVIDIA graphics driver on your system.

1. Open the System Configuration app from the Windows 11 Search.

2. Switch to the Boot tab and check the Safe Boot option. Once you have done this, click the Apply button and restart your computer.

3. After restarting, navigate to Local Disk C > Program Files > Program Files (x86) and delete the NVIDIA Corporation folder.

4. Open Device Manager from the Windows Search.

5. Right-click the NVIDIA Display adapter and select Uninstall Device.

6. Once uninstalled, open System Configuration again and turn off the Safe Boot option. You will be asked to restart your PC.

7. Now open the NVIDIA official website and download the latest graphics driver for your PC.

8. Once downloaded, install it on your device.

3. Use NVIDIA GeForce Experience

NVIDIA GeForce Experience is a popular software suite designed to enhance PC gaming performance. You can use it to download or update your existing NVIDIA graphics driver.

• Download NVIDIA GeForce Experience on your PC.
• Launch NVIDIA GeForce Experience and switch to the Driver tab.
• If your PC has no graphics driver, NVIDIA GeForce Experience will show you the Install button.
• Click the Install button to install your PC’s compatible NVIDIA graphics driver.

4. Update your Windows operating system

Windows is designed to install the much-needed drivers automatically. So, if you still get the error, it’s best to update Windows 11. This will download & install the most compatible graphics driver.

1. Open Windows Search and click on Settings.

2. Switch to Windows Update.

3. Click Check for Updates.

Also read: Download NVIDIA GeForce Experience Offline Installer

This guide explains how to resolve the ‘NVIDIA graphics driver is not compatible with this version of Windows’ error message. If you need more help fixing the NVIDIA Graphics driver error, let us know in the comments below.

The post How to Fix: NVIDIA Driver is Not Compatible With This Version appeared first on TechViral.

1. Access Advanced Startup on Windows 11 via Settings

On Windows 11, you can access the Advanced Startup directly via Settings. Here’s what you need to do.

1. Click the Windows 11 Start button and select Settings.

2. Click System.

3. Find and click Recovery.

4. Click the Restart Now button beside Advanced Startup.

This will restart your Windows 11 computer, and you will see the option to access the Advanced Startup options.

2. Access Advanced Startup using Quick Link

You can also access Advanced Startup via the Quick Link. Here’s what you need to do.

• Click the Windows 11 Start button and then the Power button.
• Press and hold the Shift key and select the Restart option.

3. Access Advanced Startup Options via Command Prompt

If you’re comfortable using the command-line utility, here’s how to access the Advanced Startup options via CMD.

1. Open Command Prompt with admin rights.

2. Execute the command:

shutdown /r /o

3. You will see a sign-off message asking you to save your work.

Your PC will restart and will automatically open the Advanced Startup options.

4. Access Advanced Startup on Windows 11 via Installation Media

If you already have a Windows 11 bootable USB device ready, you can access the Advanced Startup on Windows 11.

1. Insert a USB flash drive into your Windows 11 computer.

2. Restart your PC and boot from the USB device.

3. Click Repair your computer.

5. Access Advanced Startup Options from Recovery Drive

If you already have a recovery drive, you can use it to boot into Advanced Startup options.

• Insert the Windows 11 recovery drive into a USB Port.
• Boot your PC from the USB flash drive.
• The Windows Setup wizard will start. Select the keyboard layout you want to use.
• This will immediately launch the Advanced Startup Options.

6. Access Advanced Startup using Automatic Repair

Another way to access the Advanced Startup Options is to trigger an Automatic Repair. It’s the least recommended method, but it works.

1. Restart your PC by pressing the physical power button. When your PC is booting, you need to press the physical power button again to force a restart. The goal of this is to interrupt the boot process.

2. Repeat the process 3-4 times until you see the Automatic Repair screen. On the Automatic Repair screen, click on Advanced Startup Options.

These are the best methods for accessing the Advanced Startup options on Windows 11. After entering the Advanced Startup options, you can troubleshoot various system errors.

The post 6 Best Ways to Access Advanced Startup Options in Windows 11 appeared first on TechViral.

1. Enable Fast Startup

Fast Startup is an option that you should enable to make your SSD faster.

1. Open the Control Panel on your Windows 11 and click on Hardware and Sound.

2. Click Power Options.

3. Click Choose what the power button does.

4. Click the Change settings that are currently unavailable.

5. Check Turn on fast startup. Once you have done this, click Save Changes.

2. Disable Startup Programs on Windows 11

Unnecessary startup programs can slow down the boot time. Even if you have an SSD, you will notice a drop in performance if you have many Startup Programs enabled.

1. Open Task Manager from the Windows Search.

2. Switch to the Startup Apps tab.

3. Click on the Status section to sort enabled apps. Right-click on all unnecessary apps and select Disable

3. Disable the SSD Defragmentation

The Windows disk Defragmentation tool allows you to free up storage space and speed up an aging drive. The tool fills empty gaps and brings the stored data closer for faster access.

1. Click on the Windows 11 search and type Defragment. Launch the Defragment and Optimize Drives tool from the list of matching results.

2. Click on the Change settings button under the Scheduled Optimization.

3. Uncheck the Run on a schedule option. Once you’ve done this, click OK.

4. Disable Indexing

The indexing in Windows is done to speed up file searches. However, this can often affect the speed and performance of the SSD.

1. Open the Windows 11 File Explorer. Right-click on your SSD drive and select Properties.

2. Uncheck the Allow files on this drive to have contents indexed in addition to file properties.

3. Once done, click Apply. On the Confirm attribute change prompt, select Apply changes to subfolders and files and click OK.

Also read: Windows 11 Free Download

These are some of the best ways to speed up your SSD on your Windows 11 computer. In the comment box below, let us know if you know of any other ways to speed up a slow SSD on Windows 11.

The post How to Improve SSD Performance on Windows 11 appeared first on TechViral.

1. Run Windows 11 File Explorer as Administrator

You can access the Windows folder to run File Explorer as an administrator.

1. Open the File Explorer (This PC) on your PC.

2. Navigate to the C: Drive > Windows.

3. Find the Explorer app in the Windows folder. Right-click the Explorer app and select Run as administrator.

This will launch File Explorer as an administrator on the Windows 11 operating system.

2. Run File Explorer as Administrator from PowerShell

Use the PowerShell utility on your computer to run File Explorer as an administrator.

1. Open PowerShell with admin rights.

2. Paste the given command and press Enter.

C:\windows\explorer.exe /nouaccheck

3. Run File Explorer as Administrator from Search

You can also run File Explorer as Administrator on Windows 11 via Search.

1. Click on the Windows Search and type explorer.exe.

2. Right-click on Explorer.exe and select Run as Administrator.

4. Run File Explorer as Administrator via Task Manager

The Task Manager of Windows 11 can also be used to run File Explorer as administrator.

1. Open the Task Manager app from the Windows Search.

2. Click the File menu and select Run New task.

3. On the Create new task window, type in explorer.exe and check the box for Create this task with administrative privileges. Once you’ve done this, click OK.

This will force File Explorer to restart with elevated privileges.

5. Use the Administrator Account on Windows 11

If you always want to run File Explorer as an administrator, you should use the Administrator account by default on your Windows 11. You no longer need to rely on the other two methods to open File Explorer with admin privileges.

We have already shared a detailed guide on enabling the administrator account in Windows 11. Read that guide to know the steps to allow the admin account.

Why should you run File Explorer as Administrator?

There are a few benefits that you will enjoy when running File Explorer as an administrator.

• You can access the restricted files & folders.
• Running File Explorer as an administrator allows modifying the protected system settings.
• Manage file ownership and permissions.
• You will be able to perform tasks in bulk.
• You can access and modify the system files.

These are the best methods to run Windows 11 File Explorer as an administrator. If you have any doubts, let us know in the comment box below.

The post 5 Best Ways to Run File Explorer as Administrator in Windows 11 appeared first on TechViral.

1. Run Task Manager As Administrator via Windows Search

If you have a standard account but want to run Task Manager with elevated privileges, run it as Administrator.

• Click Windows 11 search and type Task Manager.
• Right-click on Task Manager from the search results and select Run as administrator.
• Alternatively, you can click the Run as administrator option in the right pane of the Windows search.

This will run Task Manager as an administrator on Windows 11. You can kill the process that requires elevated privileges to be terminated.

2. Run Task Manager As Admin via Command Prompt

You can use the Command Prompt utility on Windows 11 to run Task Manager as an admin.

1. Click the Windows 11 search and type in Command Prompt.

2. Right-click on the Command Prompt and select Run as administrator.

3. Type in taskmgr and press Enter.

3. Run Task Manager as Admin via Desktop Shortcut

You can create a desktop shortcut to always run Task Manager as an admin.

1. Open the Windows 11 search and type in Task Manager.

2. Right-click on the Task Manager from the search result and select Open File Location.

3. Right-click on the Task Manager shortcut and select Open file location.

4. Right-click on Taskmgr.exe and select Send to > Desktop (create shortcut).

5. Right-click on the shortcut file on your desktop and select Properties.

6. On the Taskmgr.exe – Shortcut properties window, click on Advanced.

7. Check Run as administrator and click Ok.

Whenever you want to run Task Manager as an admin on Windows 11, double-click on the Desktop shortcut you have created.

4. Open Task Manager as Administrator via Control Panel

Another way to open Task Manager as an Administrator is to access the Control Panel.

• Press the Windows Key + R button to open the RUN dialog box.
• Type Control and press Enter.
• Change the screen view to Large Icons.
• Open the Windows Tools folder.
• Right-click on the Task Manager and select Run as administrator.

You can run Task Manager as an admin on Windows 11 to perform specific tasks that require admin privileges. Like the Task Manager, you can also open PowerShell as an administrator in Windows 11.

The post 4 Ways to Run Task Manager As Administrator in Windows 11 appeared first on TechViral.

Disable the Activity History on Windows 11?

1. Click on the Windows Start button and select Settings.

2. Switch to Privacy & Security.

3. Scroll to Windows Permissions and click Activity History.

4. Turn off the toggle beside Store My Activity History on this device.

From now on, the feature won’t store any activity history on your device.

How to Clear Activity History on Windows 11?

After disabling the Activity History, you will want to remove the old activities. To do so, you need to clear the saved Activity History as well.

• Open the Settings app on your Windows 11.
• Switch to Privacy & Security > Activity History.
• Click Clear History.
• On the Clear activity history prompt, click Clear.
• This will clear all the activity history previously stored on your Windows PC.

This guide explains Activity History and how to turn it off. In the comments, let us know if you need more help with this topic.

The post How to Clear & Disable Activity History on Windows 11 appeared first on TechViral.

1. Run the SFC Command in Windows 11

SFC, or System File Checker, is a Windows utility that scans and fixes corrupted system files. Here’s how to use it.

1. Open Command Prompt with admin rights.

2. Type in sfc /scannow and press Enter.

3. This will run the SFC utility on your Windows 11. The process will take a few minutes to complete. Once completed, you will see one of the following messages. Here’s what each message means.

• Windows Resource Protection did not find any integrity violations.

If you see this message, it means your Windows 11 is in good condition, and there are no corrupted files in your system.

• Windows Resource Protection could not perform the requested operation.

If you see this message, the SFC command failed to run the scan. To fix this, you need to boot Windows 11 into safe mode and follow the same steps.

• Windows Resource Protection found corrupt files and successfully repaired them.

If the Command Prompt utility shows you this message, SFC has fixed the corrupted system files.

• Windows Resource Protection found corrupt files but could not fix some of them.

If you see this message, the SFC Command has found corrupted system files but failed to replace them. In this case, you need to follow other methods to fix corrupted system files.

2. Run the DISM command

If the SFC utility has failed to repair the corrupted system files, you should run the DISM command.

1. Type Command Prompt in Windows 11 Search. Right-click on CMD and select Run as administrator.

2. Execute the command shared below and press Enter.

DISM /Online /Cleanup-Image /RestoreHealth

The DISM utility will try to find and repair the corrupted files in your Windows 11 PC. The process might take a few minutes to complete.

3. Run Startup Repair

If you have problems with Windows 11 startup, you must run Startup Repair.

1. Click on the Windows 11 power menu, hold down the Shift key, and select Restart.

2. This will take you to the boot screen. On the Boot screen, click on the Troubleshoot option and then Advanced Options.

3. Click on Startup Repair.

4. On the next screen, select your OS version.

Your Windows 11 PC will restart and attempt to fix Startup problems. The process might take some time to complete, so be patient.

4. Perform a System Restore

If the above methods fail to fix corrupted system files on your Windows 11 PC, you need to perform a system restore.

1. Type System Restore in Windows Search and open the Recovery app.

2. Click Open System Restore.

3. Select the restore point you want to use on the System Restore Window. Once done, click Next.

4. Click Finish.

Your device will restart and restore your computer to its state before the selected event.

5. Reset Your Windows 11 PC

If none of the methods worked and you are still getting BSOD errors, it’s best to reset your PC. Windows 11 provides an option to reset your PC to its factory default state.

However, you should note that resetting Windows 11 will remove all apps installed on your device. Back up your essential apps and data before resetting your PC.

Frequently Asked Questions:

Does repairing corrupted system files speed up a PC?

If the system files are corrupted, the device will perform slowly. So, it’s best to repair the corrupted system files to ensure better performance & stability.

Can Windows 11 Repair Itself?

Yes, if some files are corrupted, Windows 11 will automatically run the repair tool to fix them. However, you may sometimes have to manually repair corrupted files.

How do I fix the automatic repair loop in Windows 11

You can try running the SFC/DISM commands, checking the disk utility, rebuilding the BCD, and restoring the Windows Registry to fix the repair loop.

How to Repair Windows 11 Using CMD?

You can try running the System File Checker utility from the Command Prompt to repair the corrupted system files.

These are the best and most effective methods to repair corrupted Windows 11 files. If none of the methods worked for you, you must reinstall Windows 11 on your device.

The post 5 Best Ways to Repair Windows 11 Corrupted System Files appeared first on TechViral.

1. Uninstall Updates via Settings

You can quickly uninstall Windows Updates from Settings.

1. Click on the Windows 11 Start menu and select Settings.

2. Click Windows Update.

3. Click Update History.

4. Scroll down to the Related Settings section and click Uninstall updates.

5. Right-click on the most recent update and select Uninstall.

2. Uninstall Windows 11 Updates via Control Panel

Another way to uninstall Windows 11 Update is by accessing the Control Panel.

1. Open Control Panel from the Windows Search.

2. Click the Uninstall a Program link underneath Programs.

3. Click on View installed updates.

4. You will see all Windows 11 updates installed on your system. Right-click on the update you want to uninstall and select Uninstall.

3. Uninstall Windows 11 Updates via PowerShell

The PowerShell utility can be used to uninstall the Windows 11 Update.

1. Launch Windows PowerShell with admin rights.

2. Enter the command:

wmic qfe list brief /format:table

3. This command will list a table of all Windows 11 updates installed on your device. You need to note the HotfixID (the number after ‘KB’) of the update you want to install.

4. Enter the command:

wusa /uninstall /kb:HotFixID

Replace the HotFixID with the update’s identification number. For example, if you want to uninstall the update KB5014019, the command would look like

wusa /uninstall /kb:5014019

5. Once done, press the Enter button to execute the command. On the confirmation prompt, click Yes.

4. Uninstall Windows 11 Update from Command Prompt

Like PowerShell, you can use Command Prompt to uninstall Windows Updates.

1. Type CMD in Windows search. Right-click on it and select Run as administrator.

2. Copy & paste the given command and press Enter.

wmic qfe list brief /format:table

3. You will now see the Windows Update History. Identify the problematic update by its HotfixID and InstalledOn information.

4. To uninstall a specific update, execute this command:

wusa /uninstall /kb:KBNUMBER

Important: Replace KBNUMBER with the actual KB number of the update you want to uninstall.

Follow the on-screen instructions to complete the uninstallation process.

5. Uninstall Windows 11 Updates via Recovery Environment

If your PC doesn’t boot, you can use Windows RE to uninstall the problematic update. Here’s what you need to do in the Windows Recovery Environment.

1. Click on the Windows 11 Start menu and select Settings.

2. Click Windows Update.

3. Click Advanced Options.

4. Scroll down and click Recovery.

5. Click Restart Now.

6. Your computer will restart and enter Recovery mode. On the Windows RE, navigate to Troubleshoot > Advanced Options and click Uninstall updates.

7. You can uninstall the latest Windows 11 Quality or Feature update. Uninstall it, and your PC is likely to boot now.

6. Uninstall Windows Update by creating a batch file

You can create a batch script in Windows containing the updates you want to uninstall. After creating the batch file, you can uninstall the updates by running it on your computer.

1. Open Notepad from the Windows Search.

2. Enter the following text.

@echo off

wusa /uninstall /kb:2565063 /quiet /norestart

wusa /uninstall /kb:5028851 /quiet /norestart

END

Important: You need to replace ‘2565063’ and ‘5028851’ with the identification number of the update you are uninstalling. And you can add more lines between @echo off and END.

3. Click the File > Save As option to save the Notepad file.

4. On the Save As Prompt, save the file with .bat as an extension.

5. To uninstall the updates, double-click on the Batch file you’ve created.

These are just a few ways to uninstall Windows 11 updates manually. If you have set up an automatic system restore on Windows 11, you can even roll back your PC to a previous point to uninstall the updates.

The post How to Manually Uninstall Windows 11 Updates appeared first on TechViral.

1. Check Your Graphics Card via Settings

You can easily check your graphics card details via Windows 11 Settings.

1. Click on the Windows 11 Start menu and select Settings.

2. Switch to System.

3. Click on Display.

4. Scroll down and click Advanced Display.

5. Under the Display information, you will see your graphics card.

2. Check Graphics Card Details using the System Information Tool

The System Information tool in Windows 11 provides a lot of information about your graphics card.

1. Press the Windows Key + R button on your keyboard. This will open the RUN dialog box. Type in msinfo32, then hit Enter.

2. On the System Information Window, expand Components.

3. Select Display. Check the Name section to find your graphics card on the right.

3. Check Your Graphics Card via Task Manager

You can use the Task Manager to check the graphics card on Windows 11.

1. Type Task Manager in Windows 11 Search and open it.

2. Switch to Performance.

3. Select the GPU unit on the right of the Performance tab.

4. On the right, you will find your Graphics card name.

4. Check Your Graphics Card via Device Manager

We will use Windows 11’s Device Manager to find the graphics card (GPU) unit installed.

1. Open Device Manager from the Windows Search.

2. Expand the Display adapters.

3. This will expand the Display Adapters menu and reveal the graphics card used in your device.

4. If you want more details about the Display adapter, double-click on the Graphics card name.

5. Check Graphics Card details via the DirectX Diagnostic Tool

DirectX Diagnostic Tool is a utility that reports detailed information about the DirectX components and drivers installed on your PC. It also tells you about the graphics card installed on your device. Here’s how to use it.

1. Open the RUN Dialog box, type dxdiag, and press Enter.

2. Give the tool a few seconds to fetch the driver information. Once fetched, switch to the Display tab.

3. The display section lists all the details you will probably need about the GPU, including its name, Manufacturer, Total Memory, Display Mode, Driver version, and more.

DirectX Diagnostic Tool in Windows can tell you other information, such as the total RAM, the Operating system used, the build number, the Processor details, and more.

6. Check the Graphics Card Details using PowerShell

If you’re comfortable handling the PowerShell utility, here’s how you can use it to check the GPU details.

1. Type PowerShell in the Windows 11 search. Right-click on it and select Run as administrator.

2. Type the following text and press Enter.

Get-CimInstance win32_VideoController

3. The above command will give you various information about your graphics card.

4. You need to pay special attention to the Caption, Description, and Name.

How to Improve Graphics Performance on Windows 11?

You can do a few things to improve the graphics performance on Windows 11. Here are some of them:

• Keep the graphics driver up to date.
• You can try installing the latest graphics driver from the GPU manufacturer’s website.
• Update your Windows 11 PC.
• End task the apps & processes running in the background.
• Turn on Hardware acceleration wherever available.
• Keep the apps/games up to date.
• Reduce the use of animations on Windows 11.

Also Read: How to Check RAM Information on Windows 11

That’s all about checking your Graphics Card in Windows 11. The graphics card name and these methods will also help you fetch all the GPU-related information you will ever need. Let us know if you know other ways to find the GPU details.

The post 6 Best Ways to Check the Graphics Card (GPU) in Windows 11 appeared first on TechViral.

1. Scan for Hardware Changes via Device Manager

Device Manager seems to be the easiest way to scan for hardware changes.

1. Open Device Manager from the Windows Search.

2. Right-click the Device Category and select Scan for hardware changes.

3. If you aren’t sure about the Device Category, click on the Action menu and select Scan for hardware changes.

2. Scan for Hardware Changes from the Computer Management Tool

The Windows Computer Management utility has the Device Manager; hence, you can use it as well to scan for hardware changes.

1. Open the Computer Management tool from the Windows Search.

2. Navigate to System Tools > Device Manager.

3. Select the device category.

4. Click Action and select Scan for hardware changes.

3. Scan for Hardware Changes via Command Prompt

If you’re a pro user, you can use the command prompt utility to scan for hardware changes. Here’s what you need to do.

1. Open Command Prompt with admin rights.

2. Execute this command:

pnputil.exe /scan-devices

3. You will see the ‘Scanning for device hardware changes’ message once you execute the command. This confirms that Windows is scanning for hardware changes.

Once you see the Scan Complete message, close the Command Prompt.

4. Create a desktop shortcut to scan for hardware changes

Not everyone is comfortable handling the Device Manager, Computer Management tool, or Command Prompt. For them, the best option is to have a desktop shortcut to scan for hardware changes.

1. Right-click on an empty area on your desktop screen and select New > Shortcut.

2. In the Type the location of the item field, paste the given location, and click Next.

C:\Windows\System32\cmd.exe /k pnputil.exe /scan-devices

3. On the name this shortcut Window, type Scan for Hardware Changes and click Finish.

4. Right-click on the desktop shortcut and select Properties.

5. Switch to the Shortcut tab and click Advanced.

6. On the Advanced Properties, check Run as administrator and click OK.

7. After making the changes, click Apply.

When you want to scan for hardware changes, double-click on the desktop shortcut you’ve created.

These are a few easy methods to run a scan to detect hardware changes on Windows 11. If you need more help scanning for hardware changes, let us know in the comments.

The post 4 Ways to Scan for Hardware Changes on Windows appeared first on TechViral.