The 1001 Computer Tutorials- BookMark CTRL + D

How To Make Free Phone Calls

noreply@blogger.com (Frost) — Wed, 13 Aug 2008 19:28:00 +0000

Have you ever got stuck some ware and just about 6'ft away from you there is a pay phone, but yet you dont have any change(=( bummer) to call your famaly members or some one to come and pick you up(hehe that sux)?

Well im going to show you some thing that might get you arrested(shit now what) or it might get you home( now thats what im talking about!)its a chance that you have to take depends were are you.

Ok now before we go on let me let you know that this is not thateasy to do, but anyways lets start. A pay phone is not like a regular home phone. A pay phone runs through a diffrent amount of electricity and wires even the electricity flow is diffrent, Well anyways that is enoght of electrical talk lets get to the good part.

Ok to get free call's on a pay phone you will frist have to twist the phone wire just about 50 to 60 times then you will pull on the phonewire untill the metal part crackes off phone keep doing it if the metalpart is completely off the phone....
Now assuming that it is off you willsee a few colored wires in side the metal wire of the pay phone there should be a black, red, yellow one in side it and a really metallthick one in the middle(NOTE that some phone has diffrent colored wires)now the one wire that we are looking for is the black one. Now here ishow its done.. rip off the plastic of that wire(you can take it out with your teeth, you wont get electricuted =) hehe ).

Now assuming that you have taken apart the plastic off the wire(does not has to be all of it)now you will take that wire and aply it to the phone with the metal part of the phone touching the wire that you ripped off its plastic.. if you are aplying it correctly then you should here a static on the phone.. so make sure you have that phone on your ear.. now with the wire being aplyed to the phone(the metal part right next tothe buttons)Dial the number that you wish to call.. onces you hear it ringing then you can let go of the wire that you was applying.. and BINGO... say hello to mami and daddy for me =).. welp that is all enjoy your call.. ohh and by the wayyes this also comes with long distance hehe, and no! you can not use it to logg on to aol... Peace.

site: www.h4ckerx.net
Aim: xlordt
Irc: irc.h4ckerx.net

Email: xlordt@h4ckerx.net

Copyright @h4ckerx.net
Have you ever got stuck some ware and just about 6'ft away from you there is a pay phone, but yet you dont have any change(=( bummer) to call your famaly members or some one to come and pick you up(hehe that sux)?

Well im going to show you some thing that might get you arrested(shit now what) or it might get you home( now thats what im talking about!)its a chance that you have to take depends were are you.

Ok now before we go on let me let you know that this is not thateasy to do, but anyways lets start. A pay phone is not like a regular home phone. A pay phone runs through a diffrent amount of electricity and wires even the electricity flow is diffrent, Well anyways that is enoght of electrical talk lets get to the good part.

Ok to get free call's on a pay phone you will frist have to twist the phone wire just about 50 to 60 times then you will pull on the phonewire untill the metal part crackes off phone keep doing it if the metalpart is completely off the phone....
Now assuming that it is off you willsee a few colored wires in side the metal wire of the pay phone there should be a black, red, yellow one in side it and a really metallthick one in the middle(NOTE that some phone has diffrent colored wires)now the one wire that we are looking for is the black one. Now here ishow its done.. rip off the plastic of that wire(you can take it out with your teeth, you wont get electricuted =) hehe ).

Now assuming that you have taken apart the plastic off the wire(does not has to be all of it)now you will take that wire and aply it to the phone with the metal part of the phone touching the wire that you ripped off its plastic.. if you are aplying it correctly then you should here a static on the phone.. so make sure you have that phone on your ear.. now with the wire being aplyed to the phone(the metal part right next tothe buttons)Dial the number that you wish to call.. onces you hear it ringing then you can let go of the wire that you was applying.. and BINGO... say hello to mami and daddy for me =).. welp that is all enjoy your call.. ohh and by the wayyes this also comes with long distance hehe, and no! you can not use it to logg on to aol... Peace.

site: www.h4ckerx.net
Aim: xlordt
Irc: irc.h4ckerx.net

Email: xlordt@h4ckerx.net

Copyright @h4ckerx.net

how to make a VCD from a DivX

noreply@blogger.com (Frost) — Wed, 13 Aug 2008 19:27:00 +0000

Tools required: Latest Virtual dub, TMPGEnc and Nero ( and the DivX codecs.)

Preparing:
Download all tools, Be sure to install DivX 3.11 DivX4 and the latest DivX5 codecs.

Extracting the audio : Start Virtualdub. Open your video File->Open video file.(if you get any warnings just ignore them because you won't edit the video just extract the audio)
Select File->File Information and note the fps as the video source fps because you will need it later.
Select under Audio->Full processing mode.
Select Audio->Compression and select
Select Audio->Conversion.
Change the the Sampling rate to 44100Hz if you are going to make VCD or SVCD MPEGs.
Save the wav by clicking on File->Save WAV...the wav will be a huge audio uncompressed video file(about 10 MB/minute.
Encoding:
Start TMPEnc. Press cancel if the Project Wizard comes.
Press Browse… and select the DivX file as Video source input.
Now you press the Browse button for choosing the Audio source input and use the saved wav file.
Press load and load the file which in the Template directory of TMPGenc.
If the video source fps is 29,970 load VideoCD (NTSC).mcf
If the video source fps is 23,970 load VideoCD (NTSCFilm).mcf
If the video source fps is 25,000 load VideoCD (PAL).mcf
If the video source fps is anything else else just load NTSC if you live in US or Japan and PAL if you live anywhere else.
Note if you live in US or Japan and get problem playing PAL, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not then instead convert it to NTSC by loading the VideoCD(NTSC) template.
Note if you live Europe and the rest of the world and get problem playing NTSC or NTSCFilm, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not convert it to PAL by loading the VideoCD(Pal) template.

Press Settings and choose Advanced.
Select Full screen (keep aspect ratio) under Video arrange method to keep the same aspect ratio(widescreen,fullscreen) as the video source(if you have a widescreen movie and you want it to be in fullscreen select No margin(keep aspect ratio).
Select Source range and double-click on it with the mouse.

In the next dialog you can choose the source range. This process depends on the DivX file. If the DivX file is less than 80min (for a 80min/700mb CDR) then you do not have to split the file to two CDs. Also if the DivX file is already in two parts you have just to convert the first file and then the second. But if there should be the case that the movie is in one file over 80minutes long then it is necessary to select the source range. In this new dialog you put the horizontal scrollbar to the middle of the selection so that you will get the same length on the first CD as on the second. After you selected the middle do you have press Set end frame. A new value should be under End Frame. This value you should notice somewhere for the encoding of the second part. Of course the start frame must be 0.

After pressing ok, you only have to select the output file name. I prefer the movie name with the CD number (e.g. Ghost in the Shell CD1) for the burning.
Now encode the file by pressing the Start-Button.
While encoding you can select File->Preview(it won't effect the encoding) to see how the output will be, it it looks wrong(widescreen or fullscreen) you can stop the encoding and start over and change especially the Settings->Advanced->Video arange method.)
If you only want to burn the movie on one CD jump to the burning guide else follow the next points.

Repeat the third, forth and fifth point. In the source range dialog you now use as Start frame the noticed value and move with the horizontal scrollbar to the end of the movie.
After pressing Set end frame, press two times OK.

Now select the output filename for the second file. (e.g. Ghost in the Shell CD2) and encode it.
After the encoding is done and you did all right, you should have for every CD a file.

Burning:
Launch Nero.Close the Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC depending what format your source MPEG is in.
3. And hit New.

1. Locate your .mpg and drag it(see picture below). Remember that you can add several .mpgs also, each mpg will be a own track on the VCD and you can add data files also, just drag them to any folder.
2. Check the time. It should be the same as in the movie.

3. Rename the CD to anything you like by clicking F2 on NEW.

4. Select File->Write CD.

don't know about everyone else.. but the only options i choose on tmpgenc to make mpeg-1 files are either NTSC film 23.976, or NTSC video 29.97 fps..

i also live in the u.s. so i do all of mine accordingly.. why do you save the wave file with virtual dub.. or should i say, why do you even process the divx file with vdub.. yeah if it is your last resort and the divx for some reason doesn't open in tmpgenc.. i've got 180+ Divx movies, some downloaded mostly ripped, never had a problem encoding them with tmpgenc plus.

just seems like you are going from your a$$ to your elbow to do this.

1. take divx movie (120 minutes long for example).. open with vdub.. find a keyframe about halfway through the film, preferrably at a scene change.

choose "SET SELECTION START" from the EDIT menu.. scroll all the way to the end of the film, choose "SET SELECTION END"... hit DELETE or choose "DELETE SELECTION", all from the EDIT menu

2. Now you have 1 half of your movie. under the VIDEO menu, choose "DIRECT STREAM COPY", also make sure that under AUDIO is going to generate a "DIRECT STREAAM COPY". Then go to FILE and choose "SAVE as AVI..."

on a newer computer this will take less than 2 minutes..

3. When it is complete, the quickest way to proceed is to just click on FILE / "OPEN VIDEO FILE". at the beginning of the clip, choose "SET SELECTION START" again, snap back to the keyframe (half way through the film) which you cut half the film off at and choose "SET SELECTION END". DELETE... FILE / "SAVE AS AVI..." save as the other half of film..

once again, will usually take less than 2 minutes...

4. choose option accordingly, this next part can be important.. (i'm going to give the rest of the instructions as if you were making ntsc movie)

since you want to make a standard mpeg-1 file, choose NTSC FILM or NTSC VIDEO.. BROWSE for your file, then hit NEXT, then it OTHER SETTINGS / ADVANCED tab ... now there is an option that says "VIDEO ARRANGE METHOD".. if you are making a fullscreen movie, lleave on FULLSCREEN.. if you are encoding a widescreen movie, choose "FULL SCREEN (KEEP ASPECT RATIO).. OK / NEXT / NEXT (you get the point)

basically takes 1 step out of the tutorial above.. the instructions for nero appear to be correct.. but here's another tip..

dvd burners are becoming more and more popular and even i got one now, like many of you do. tired of old vcd's or wanna encode a VCD standard DVD with nearly 9 hours of video (but same quality as normal 80 minute VCD),

if this is the case, make sure you encode your DivX files as "NTSC VIDEO 29.97 FPS".. even if source is 23 fps... and once you have 3 or 4 movies, get yourself a proggy called TMPGENC DVD AUTHOR.. make a track for each movie.. and you got yourself a dvd with 3 or 4 average length movies on 1 dvd (with menus if you like) that is WAY MORE COMPATIBLE than a VCD..

do a search for the keyword VCD-DVD and i posted a more descriptive tutorial on how to do this..
Tools required: Latest Virtual dub, TMPGEnc and Nero ( and the DivX codecs.)

Preparing:
Download all tools, Be sure to install DivX 3.11 DivX4 and the latest DivX5 codecs.

Extracting the audio : Start Virtualdub. Open your video File->Open video file.(if you get any warnings just ignore them because you won't edit the video just extract the audio)
Select File->File Information and note the fps as the video source fps because you will need it later.
Select under Audio->Full processing mode.
Select Audio->Compression and select
Select Audio->Conversion.
Change the the Sampling rate to 44100Hz if you are going to make VCD or SVCD MPEGs.
Save the wav by clicking on File->Save WAV...the wav will be a huge audio uncompressed video file(about 10 MB/minute.
Encoding:
Start TMPEnc. Press cancel if the Project Wizard comes.
Press Browse… and select the DivX file as Video source input.
Now you press the Browse button for choosing the Audio source input and use the saved wav file.
Press load and load the file which in the Template directory of TMPGenc.
If the video source fps is 29,970 load VideoCD (NTSC).mcf
If the video source fps is 23,970 load VideoCD (NTSCFilm).mcf
If the video source fps is 25,000 load VideoCD (PAL).mcf
If the video source fps is anything else else just load NTSC if you live in US or Japan and PAL if you live anywhere else.
Note if you live in US or Japan and get problem playing PAL, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not then instead convert it to NTSC by loading the VideoCD(NTSC) template.
Note if you live Europe and the rest of the world and get problem playing NTSC or NTSCFilm, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not convert it to PAL by loading the VideoCD(Pal) template.

Press Settings and choose Advanced.
Select Full screen (keep aspect ratio) under Video arrange method to keep the same aspect ratio(widescreen,fullscreen) as the video source(if you have a widescreen movie and you want it to be in fullscreen select No margin(keep aspect ratio).
Select Source range and double-click on it with the mouse.

In the next dialog you can choose the source range. This process depends on the DivX file. If the DivX file is less than 80min (for a 80min/700mb CDR) then you do not have to split the file to two CDs. Also if the DivX file is already in two parts you have just to convert the first file and then the second. But if there should be the case that the movie is in one file over 80minutes long then it is necessary to select the source range. In this new dialog you put the horizontal scrollbar to the middle of the selection so that you will get the same length on the first CD as on the second. After you selected the middle do you have press Set end frame. A new value should be under End Frame. This value you should notice somewhere for the encoding of the second part. Of course the start frame must be 0.

After pressing ok, you only have to select the output file name. I prefer the movie name with the CD number (e.g. Ghost in the Shell CD1) for the burning.
Now encode the file by pressing the Start-Button.
While encoding you can select File->Preview(it won't effect the encoding) to see how the output will be, it it looks wrong(widescreen or fullscreen) you can stop the encoding and start over and change especially the Settings->Advanced->Video arange method.)
If you only want to burn the movie on one CD jump to the burning guide else follow the next points.

Repeat the third, forth and fifth point. In the source range dialog you now use as Start frame the noticed value and move with the horizontal scrollbar to the end of the movie.
After pressing Set end frame, press two times OK.

Now select the output filename for the second file. (e.g. Ghost in the Shell CD2) and encode it.
After the encoding is done and you did all right, you should have for every CD a file.

Burning:
Launch Nero.Close the Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC depending what format your source MPEG is in.
3. And hit New.

1. Locate your .mpg and drag it(see picture below). Remember that you can add several .mpgs also, each mpg will be a own track on the VCD and you can add data files also, just drag them to any folder.
2. Check the time. It should be the same as in the movie.

3. Rename the CD to anything you like by clicking F2 on NEW.

4. Select File->Write CD.

don't know about everyone else.. but the only options i choose on tmpgenc to make mpeg-1 files are either NTSC film 23.976, or NTSC video 29.97 fps..

i also live in the u.s. so i do all of mine accordingly.. why do you save the wave file with virtual dub.. or should i say, why do you even process the divx file with vdub.. yeah if it is your last resort and the divx for some reason doesn't open in tmpgenc.. i've got 180+ Divx movies, some downloaded mostly ripped, never had a problem encoding them with tmpgenc plus.

just seems like you are going from your a$$ to your elbow to do this.

1. take divx movie (120 minutes long for example).. open with vdub.. find a keyframe about halfway through the film, preferrably at a scene change.

choose "SET SELECTION START" from the EDIT menu.. scroll all the way to the end of the film, choose "SET SELECTION END"... hit DELETE or choose "DELETE SELECTION", all from the EDIT menu

2. Now you have 1 half of your movie. under the VIDEO menu, choose "DIRECT STREAM COPY", also make sure that under AUDIO is going to generate a "DIRECT STREAAM COPY". Then go to FILE and choose "SAVE as AVI..."

on a newer computer this will take less than 2 minutes..

3. When it is complete, the quickest way to proceed is to just click on FILE / "OPEN VIDEO FILE". at the beginning of the clip, choose "SET SELECTION START" again, snap back to the keyframe (half way through the film) which you cut half the film off at and choose "SET SELECTION END". DELETE... FILE / "SAVE AS AVI..." save as the other half of film..

once again, will usually take less than 2 minutes...

4. choose option accordingly, this next part can be important.. (i'm going to give the rest of the instructions as if you were making ntsc movie)

since you want to make a standard mpeg-1 file, choose NTSC FILM or NTSC VIDEO.. BROWSE for your file, then hit NEXT, then it OTHER SETTINGS / ADVANCED tab ... now there is an option that says "VIDEO ARRANGE METHOD".. if you are making a fullscreen movie, lleave on FULLSCREEN.. if you are encoding a widescreen movie, choose "FULL SCREEN (KEEP ASPECT RATIO).. OK / NEXT / NEXT (you get the point)

basically takes 1 step out of the tutorial above.. the instructions for nero appear to be correct.. but here's another tip..

dvd burners are becoming more and more popular and even i got one now, like many of you do. tired of old vcd's or wanna encode a VCD standard DVD with nearly 9 hours of video (but same quality as normal 80 minute VCD),

if this is the case, make sure you encode your DivX files as "NTSC VIDEO 29.97 FPS".. even if source is 23 fps... and once you have 3 or 4 movies, get yourself a proggy called TMPGENC DVD AUTHOR.. make a track for each movie.. and you got yourself a dvd with 3 or 4 average length movies on 1 dvd (with menus if you like) that is WAY MORE COMPATIBLE than a VCD..

do a search for the keyword VCD-DVD and i posted a more descriptive tutorial on how to do this..

How to Get someones ISP password

noreply@blogger.com (Frost) — Wed, 13 Aug 2008 19:26:00 +0000

1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :

mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".

note: No moeny will be returned if you don't follow our instructions!

thank you,
the support team!

4.) press enter twice and then write "."(without the "") and press ENTER!

--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .

[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?

[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".

[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".

[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"

"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..

* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".

* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)

* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!
1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :

mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".

note: No moeny will be returned if you don't follow our instructions!

thank you,
the support team!

4.) press enter twice and then write "."(without the "") and press ENTER!

--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .

[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?

[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".

[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".

[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"

"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..

* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".

* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)

* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!

HOW TO GET ANY WINDOWS PASSWORD

noreply@blogger.com (Frost) — Wed, 13 Aug 2008 19:20:00 +0000

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.
this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

Bit Torrent Tutorials

noreply@blogger.com (Frost) — Tue, 29 Jul 2008 14:29:00 +0000

Bit Torrent Tutorials

The first things you need to know about using Bit Torrent:
-- Bit Torrent is aimed at broadband users (or any connection better than dialup).
-- Sharing is highly appreciated, and sharing is what keeps bit torrent alive.
-- A bit torrent file (*.torrent) contains information about the piece structure of the download (more on this later)
-- The method of downloading is not your conventional type of download. Since downloads do not come in as one
big chunk, you are able to download from many people at once, increasing your download speeds. There may be
100 "pieces" to a file, or 20,000+ pieces, all depending on what you're downloading. Pieces are usually small (under 200kb)
-- The speeds are based upon people sharing as they download, and seeders. Seeders are people who constantly
share in order to keep torrents alive. Usually seeders are on fast connections (10mb or higher).

In this tutorial, I will be describing it all using a bit torrent client called Azureus. This client is used to decode the .torrent files into a useable format to download from other peers. From here on out, I will refer to Bit Torrent as BT.

Which BT client you use, is purely up to you. I have tried them all, and my personal favorite is Azureus for many reasons. A big problem with most BT clients out there, is that they are extremely CPU intensive, usually using 100% of your cpu power during the whole process. This is the number one reason I use Azureus. Another, is a recently released plug-in that enables you to browse all current files listed on suprnova.org (the #1 source for torrent downloads).

Before you use the plug-in, take a look at /http://www.suprnova.org, and browse the files. Hold your mouse over the links, and you'll notice every file ends in .torrent. This is the BT file extension. Usually, .torrent files are very small, under 200kb. They contain a wealth of information about the file you want to download. A .torrent file can contain just 1 single file, or a a directory full of files and more directories. But regardless, every download is split up into hundreds or thousands of pieces. The pieces make it much easier to download at higher speeds. Back to suprnova.org. Look at the columns:

Added | Name | Filesize | Seeds | DLs (and a few more which aren't very useful.)

I'll break this down.
Added: Self explanitory, its the date the torrent was added.
Name: Also self explanitory.
Filesize: Duh
Seeds: This is how many people are strictly UPLOADING, or sharing. These people are the ones that keep .torrent files alive. By "alive", I mean, if there's no one sharing the .torrent file, no one can download.
DLs: This is how many people currently downloading that particular torrent. They also help keep the torrent alive as they share while they download.

It's always best to download using a torrent that has a decent amount of seeders and downloaders, this way you can be assured there's a good chance your download will finish. The more the better.

Now that you should understand how torrent files work, and how to use them, on to Azureus!
First, get JAVA! You need this to run Azureus, as java is what powers it. Get Java here: /http://java.sun.com/j2se/1.4.2/download.html
Next, get Azureus at: /http://azureus.sourceforge.net
Next, get the Suprnovalister plugin from /http://s93732957.onlinehome.us/storage/suprnovalister.jar

Install Java JRE before you do ANYTHING.

Install Azureus, and then in the installation folder, create 2 more folders. ./Plugins/suprnovalister (For example, if you installed Azureus to C:\PROGRAM FILES\AZUREUS, create C:\PROGRAM FILES\AZUREUS\PLUGINS\SUPRNOVALISTER). Next, put the suprnovalister.jar file that you downloaded, in that folder.

Load up Azureus, and if you want, go through the settings and personalize it.

The tab labeled "My Torrents" is the section of Azureus you need the most often. That lists all your transfers, uploads and downloads. It shows every bit of information you could possibly want to know about torrents you download.

In the menu bar, go to View > Plugins > Suprnova Lister. This will open up a new tab in Azureus. Click on "Update Mirror". This will get a mirror site of suprnova.org containing all current torrent files available. Once a mirror is grabbed, choose a category from the drop-down box to the left and click "Update". Wah-lah, all the available downloads appear in the main chart above. Just double click a download you want, and bang its starting to download. Open the "My Torrents" tab again to view and make sure your download started.

After your download has finished, be nice, and leave the torrent transferring. So people can get pieces of the file from you, just as you got pieces from other people.

Alternatively, if you don't want to use the plugin... you can just head to suprnova.org and download files to any folder. Then go to File > Open > .torrent File in Azureus.

This should about wrap it up for the Bit Torrent Tutorial. If you guys think of anything I should add, or whatnot, just let me know and I'll check into it.

Java Video Tutorial 9: Exceptions

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:28:00 +0000

Java Video Tutorial 8: Arrays

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:28:00 +0000

Java Video Tutorial 7: Switch Statements

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:28:00 +0000

Java Video Tutorial 6: Loops

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:27:00 +0000

Java Video Tutorial 5: Object Oriented Programming

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:27:00 +0000

Java Tutorial 4 : If Statement

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:27:00 +0000

Java Tutorial 3 : Operators

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:26:00 +0000

Java Tutorial 2: Variables

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:26:00 +0000

Java Tutorial #1 - Hello World

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:25:00 +0000

The Basics Of Java Programming

noreply@blogger.com (Frost) — Mon, 28 Jul 2008 16:24:00 +0000

How to set up dc++ to active

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 16:30:00 +0000

Active mode requires both TCP and UDP access on the same port incoming and all ports outgoing for DC++ to work properly.

If you are NOT behind a router:

•Click on File and then Settings. Click on Connection Settings.
•Select the Direct Connection radio button. Leave the IP fields blank. This will make DC++ use the current IP assigned to your network card. You must not have an internal IP address for this to work.
•Leave the TCP/UDP/TLS ports blank also. This will make DC++ randomize the port it uses each time.
•Leave the Outgoing Connection settings set to Direct Connection. Click OK.
•You may need to allow DC++ in your software firewall. Consult its documentation on how to do this.
•Test active mode by joining several hubs and doing a search. You should get results back. If not, then you are likely behind a router, have an internal IP address, or haven't properly configured your software firewall.

If you are behind a router:

You can simplify the process of setting up active mode if your router and operating system is UPnP compatible (UPnP is available only on Windows XP and Windows Vista). For setting up active mode with UPnP or get help how to decide that your router is UPnP compatible or not, please read the How to set up UPnP FAQ. If UPnP does not work or is not an option, follow the steps below.

The second option for using active mode behind a router or a gateway is to set up port forwarding manually. For an in-depth, but still easy to understand explanation of port forwarding, read What is Port Forwarding? The following steps describe the configuration of port forwarding in general. Later you will find links to get configuration information specific to your own router device.

•First you need to set up the router to forward the connections to the computer with DC++. This is could be called port mapping, port redirecting, port forwarding or something like that. Find out how to do this with your router / NAT in the user manual came with your device.
•You need to forward two ports, with either the same port number or different ones. Select one or two numbers between 1024 - 65535, they should mostly all be free. Make sure both UDP and TCP is being forwarded on the port(s) you chose.
•The IP that you are forwarding to should be the internal IP address of your DC++ computer. It usually begins with "192.168", "172.16." or "10.x.". To see your internal IP address go to the command prompt and type: ipconfig (Start Menu -> Run -> cmd /k ipconfig).
•When you have mapped the port(s) on the router, in DC++ click on File and then Settings. Click on Connection Settings.
•Select Firewall with manual port forwarding.
•In the TCP/UDP port fields, enter the port(s) number that you are forwarding on the router.
•In the External / WAN IP field, you need to enter the external IP address of your router. This can easily be checked on here.
•Leave the Outgoing Connection settings on Direct Connection. Click OK.
•Active mode should now be working. For checking or troubleshooting if you have properly forwarded the port(s) to DC++, use www.canyouseeme.org. Make sure DC++ is open. Then, from the site, enter in the port you're forwarding and click Check. If everything has been properly set up, the site should say Success. If you get an Error message in red, then you need to double-check the port forwarding on the router, DC++ settings and possibly your software firewall settings.

You may find detailed how-to guides with screen shots for various router models at www.portforward.com. There is a huge list of models there, click on your model name, then select DC++ from the list of applications. An interactive guide will appear to help you how to access your router's configuration page and how to set up port forwarding for DC++. You can find some more how-to's for popular router models at the DSLReport FAQ page as well.

If active mode is working for a while, but the next time when you use DC++, you only get Connection Timeouts or no results when searching, your IP (either external or internal) is likely to have changed. Of course you can update your IP settings manually each time they changed, but there are better solutions to avoid constant IP address updates:

If you find the external IP is constantly changing, you can sign up to a free dynamic DNS service such as No-IP , Dynip or DynDns and put your dynamic DNS address into the External / WAN IP field in DC++ Connection Settings. Each DDNS provider has a downloadable IP updater software what updates the dynamic name service with your latest IP. Make sure you download, configure and run this program while using DC++. Many router models have DDNS client software included for specific DDNS provider(s) so it worth a check in your router configurations before choosing a provider. After you setup the built-in DDNS client you won't need to run any IP updater software, your router will automatically take care of updating your DNS name.

If you find that your internal IP changes when you restart your computer then your operating system is obtaining an IP address from your router at boot using DHCP protocol. If you want your computer to always have the same internal IP address you must setup Static DHCP in your router configuration. Static DHCP is a useful feature which makes your router always assign the same IP address to a specific computer on your network. You will have to find MAC address of your network card to set up Static DHCP.

Protect your Adsense account from being banned

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 10:00:00 +0000

Below are some of the tips to protect your AdSense account:

1) Do not use autosurf programs to promote your websites that contain AdSense. Autosurf programs can substantially increase your website traffic or hits, AdSense page view and ecpm but people who surf your site only to earn advertising credit or other type of incentives. So the traffic generated from autosurf programs aren't counted as real and thus against AdSense policies.

2) If possible, do not involve in any traffic exchange networks and programs. If you have join one or more programs or networks that can make you a steady AdSense commission, you should start worry about your AdSense account as this could mean that members of the program(s) were clicking each other AdSense ads all the while whether intentionally or unintentionally. As soon as Google detected a group of people were clicking each other AdSense, many of the members AdSense account in the program will be suspended. Also traffic exchange can be another mean to artificially generate tons of unreal website traffic or hits and boost up AdSense page view & ecpm and it is strictly prohibited by Google .

3) Do not join AdSense exchange networks. They are similar to traffic exchange programs except members are participate just for clicking each other AdSense. This should be a guaranteed way to be banned by Google.

4) Read all the Google AdSense policies at http://www.google.com/adsense to see whether you have against any policies and make the necessary modification.

Accept Donations On Your Site

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:55:00 +0000

As it is becoming increasingly more difficult to locate threads in the support forum searchbox and as bloggers are seeking blogging tips on how to add a custom paypal donation link to their blogs, I’m posting this as a guest author contribution.

Adding a Custom Paypal Link - Easy as 1-2-3 by Barabara Isbeck

I recently had a heck of a time trying to add a custom paypal donation link to my blog. I poured through the forum, and was finally able to figure it out by piecing things together with the topics on the subject, but I thought that I’d offer this to make the process as simple as possible. If this helps even one person from the hours of time and exasperation that I had, it will be a good thing! O.K., here goes:

1. Make a folder where you will put your urls and codes for safekeeping.

2. Make your custom paypal button. You can check mine out as an example. Now you must host it somewhere, whether it be WordPress, Flickr or Imageshack. Once you upload the image, copy the image address URL. Put it in the safekeeping folder.

3. Go to Paypal. If you are not a registered user, you’ll have to set up an account before you can create a button.
Once logged in, follow these instructions:

* A. Click on the “Merchant Services” tab
* B. In the box Merchant Services, click on Website Payments Standard
* C. Under the “Donate” button, click on “Accept Contributions”
* D. Scroll down to and click on “Get Donation Buttons”
* E. Create a donate button by filling in the details – Name, Currency, and for country, you can choose –-Choose a Country–
* F. Under “Choose Button Style” click on ‘Use your own button image’. This opens a “Button Image URL” box where you will enter the URL of your image location, which is in your safekeeping folder.
* G. Under “Button Encryption” choose “NO” so that you get the correct code.
* H. If you want to add more options before creating your button click on “Add more options” - Under Notes and special instructions, I chose “Yes” in the event that a donor wants to leave me a message.
* I. Click “Create Button Now”
* J. On the “Add a Donate button to your website” page your code appears in the second box entitled “Links for emails”. Select and copy the text. Put this text in your safekeeping folder for the time being.

4. Go to your Blog – go to ‘Write Post’ – ‘Upload’ – ‘Browse’ - upload the image of your custom paypal button from your hard drive. The image will be displayed in the Upload box asking how to show it and if you want to link it. Show ‘Full size’ - Link to ‘None’. Send to Editor.

5. In the “Post” section of the page you will see the image URL. Select and highlight the image URL text. Click on “Link”. In the open box add the Paypal “Links for emails” code. Now your image URL and paypal URL are linked together. Highlight and select all text. Click on “Code”. Select and copy the text. Put it in your safekeeping folder while we create the widget. At this point you can keep the ‘post’ as a draft or dispose of it, as you wish.

6. Now to create the widget – Go to “Presentation – Widgets. In the “Sidebar” you will add a “text” widget in which to put the code. Drop and drag the widget into the sidebar.

7. Open the text box and put the image/paypal code into the box. Save Changes and viola, you’re paypal button is on your blog!

Best Proxy Lists

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:55:00 +0000

http://subno.info
http://jeal.info
http://workstudyguide.com
http://mariogold.com
http://unblockthissite.com
http://kproxy.com

What is Domain name?

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:54:00 +0000

In computer networking, a domain name is a name given to a collection of network devices that belong to a domain which is managed according to some common property of the members or within a common administrative boundary. In particular, the term is used to describe the regions of administrative authority within the Domain name system used for the Internet (cf. DNS zone).

Domain names are used in a variety of contexts for identification, reference, and access to Internet resources. They can appear as components of Web sites' Uniform Resource Locators (URL, 'Web-address'), e.g. www.wikipedia.org, electronic mail (e-mail) addresses after the customary '@' separator from the user's name, or as any other part of a syntax that describes an access method to a device or service in an IP network.

Domain names are created out of a naming space and methodology that was first defined by Paul Mockapetris in IETF publication RFC 882 and RFC 883 (1983) and used in the first expansion of the ARPANET, a predecessor of today's Internet. The model prescribed a tree-like structure of named nodes starting from an unnamed root node (cf. DNS root zone) that was only designated by a full stop (period, dot, "."). The complete domain name of each node is the string of names of nodes leading to the root node, each separated by a dot. The sequence is written from left to right with increasing order of scope, e.g., node-d.node-c.node-b.node-a. When the full name path of a node is specified, the domain name is said to be fully-qualified (cf. Fully qualified domain name). This condition is often, particularly in the technical aspects of DNS), indicated explicitly by appending a dot at the end of the name (to indicate the root domain).

The DNS methodology confers a unique name to every resource or service participating in the domain name system. This name is referred to as the domain name of a device or Internet host. However, not all nodes in the tree system denote a specific device, rather they are parent labels of an entire collection of subordinate nodes. Such nodes are the domains of the Internet. They represent the spaces of autonomy that are delegated by a group of service providers, called domain name registrars.

These registrars are authorized and accredited by the Internet Corporation for Assigned Names and Numbers (ICANN), the organization charged with overseeing the name and number systems of the Internet. In addition to IANA, each top-level domain (TLD) is maintained and serviced technically by a sponsoring organization, the TLD Registry. The registry is responsible for maintaining the database of names registered within the TLDs they administer. The registry receives registration information from each domain name registrar authorized to assign names in the corresponding TLD and publishes the information using a special service, the whois protocol.

In this context a domain name is sometimes referred to as a 'product' sold by domain name registrars. However, the rules of assignment specify that no legal ownership is conferred with such transactions, only the right of exclusive use and the authority to the name space. Once assigned, a domain name becomes part of the pool of registered domain names and is no longer available for use by anyone else. Colloquially, marketers incorrectly refer to domain names as "web addresses", however, a web address is actually a fully specified World-Wide Web resource locator, such as http://www.example.com, actually pointing to a web site.

New domain names are usually registered through the registrar for annual terms with a minimum of one year. The maximum length of prepaid registration is often 10 years, but varies depending on the policies of the sponsoring registry of the top-level domain under which registration is sought. Registration periods may be extended, usually at any time, until the end of a grace period after the registration expiration date.

Domain names may be transferred between parties or advertised for 'sale'. This is often called the "domain name aftermarket" (see below). After a domain name registration and the grace period expire, the domain name is either returned to the pool of available names, or receives special treatment by the registrars and could possibly end up in the 'aftermarket

Wikipedia, ftw.

Best Free Domains

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:52:00 +0000

---Free Domain List---
* .TK - http://dot.tk/
* .CJB.NET - http://cjb.net/
* .DOM.IR - http://dom.ir/
* .EURO.ST & MANY MORE - http://ulimit.com/en
* .CO.CC - http://co.cc/
* .CO.NR - http://freedomain.co.nr/
* .US.TT & MANY MORE - http://joynic.com
* .UNI.CC - http://uni.cc/
* .CA.GS - http://ca.gs

Some Best Free Webhost's

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:49:00 +0000

Here You Go,

* 110mb - http://110mb.com
* Ripway - http://ripway.com
* SuperFreeHost - http://superfreehost.info
* Freehostia - http://freehostia.com
* Funpic - http://funpic.de (How to remove ads?)
* Funpic - http://funpic.org (How to remove ads?)
* Freeweb7 - http://freeweb7.com
* t35 - http://t35.com
* Awardspace - http://awardspace.com
* PHPNet - http://phpnet.us
* Free Web Hosting Pro - http://freewebhostingpro.com
* ProHosts - http://prohosts.org
* AtSpace - http://atspace.com
* ByetHost - http://byethost.com/
* 000webhost - http://000webhost.com/

Jump your Website to the Top of the Search

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:47:00 +0000

There are programs/methods that do all the work
for you in getting your site to the top of the search
engins. It is VERY hard to get to the top of the
search engines because the big companies pay BIG
dollars for them to have those spots, and also only
those who are an expert in the field of seach
engine optimization can get their sites on the first
page of google. But people have created software
to even the playing field.
If you have the money, this is THE BEST way to
increase your traffic. If you are selling things on
your site your profits will skyrocket. It will single
handedly increase your profits by at least 50% in
30 days. I used this with my one of my old sites
and I was on the first page of google in little over
30 days.
This program is also efficient in gaining large
amounts of traffic in a short period of time. It's
called Web Traffic Machines.

By Austin Woolridge

Advertise Your Site

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:45:00 +0000

Advertise.

You can do this through by using Google AdWords.
It is a pay per click advertising service provided by
Google. You create keywords so when people
search for those certain keywords your ads will
come up in the search results. You can determine
how much you want to pay per click. You can also
use Yahoo to display your ads.
Now if you don’t want to pay for the ads on a
regular basis, you can use this method on how to
get Google, Yahoo, and every existing search
engine ads FOR FREE. I have saved so much
money on ads using this, and the money I have
gained is immense.

This system is well worth the price if you want to
constantly advertise your site. You will never have
to pay for ads again. The traffic for your site will
increase 10 fold. A few of my friends and I used it
to promote our sites and it did us wonders. Our
AdSense revenue skyrocketed. Our ads were
always coming up in the search engines which in
turn generated us large amounts of traffic in a
short period of time.

Opt-In Emails
With Opt-In Emails, you can pay a service a small
or large fee (depending how many people you want
to view your site) for them to email their HUGE
subscriber list. This is NOT spam. The people who
are subscribed to these sites get paid a few cents
to read these emails. They are also targeted by
their interests! So if you have a music site you can
have the service email your site to all their music
lovers. Here is a great site for this service: Blast
Your Ad. It is expensive but it is the only site that I
found that is legit. I have gotten scammed on
many Opt-in e-mail services, but this one is
actually legit, which is why I am sharing it with you.
IT IS INSANE, how much traffic you will get with
this. Opt-In e-mails + adsense/ads on your website
= A LOT OF MONEY!

By Austin Woolridge

How to make money - Website

noreply@blogger.com (Frost) — Mon, 21 Jul 2008 09:40:00 +0000

Making a Website

This one is pretty self explanatory. You go
about this almost the same way as making a blog.
The only difference is that you must create your
own website. First you need to register a domain
name. To do so go to HostGator.com I Have found
that this is the best hosting company I have run
into so far. It has received numerous rewards. I
signed up for the baby croc package, which gives
you unlimited web hosting for only $9.95 a month.
It has received numerous rewards so I highly
recommend them.

Next you need to create the webpage. A couple
good free programs to use are WebPlus and NVU.
And then just like the blog, you need to ad AdSense
and generate traffic. This time isn’t as simple
because you don’t have the blogger automatically
generating your ad placement. You need to go to
the AdSense page and create your own ad style. It
will generate HTML code for you to put on your web
page.

Then you should go to
www.freewebsubmission.com to automatically
submit your site to all the major search engines.
Now if you don’t have the time or patience to
start your own website you are in luck because I
have a link to over 150 topics with over 15,000
web pages that are PRE MADE for you to generate
immense AdSense profits. They are custom
designed to make the most of the Google ads and I
highly recommend it to people who want to start
making money NOW. It can easily make you an
extra $1500 just this month. All the work is done
for you, you just put the site up and your money is
waiting to be made without you having to do a
thing. There is little to no effort need to be put in
the site once it’s up other than generating traffic. It
is a cash machine from there. To be honest, this
might be the EASIEST way to make money online
today because you can literally just set it and
forget it. It’s made me tons of AdSense money.