The Sportster Chronicles

Runaway With Me

2015-09-27T18:30:00.001-07:00

Harley-Davidson presents:

HIGHWAY RUNAWAYS
100 years ago, mother and daughter Avis and Effie Hotchkiss rode 9,000 miles across the country from New York to San Francisco. To pay homage to these iconic women, rider-photographer Lanakila "Lana" MacNaughton and her closest female friends have embarked on a similar route, doing it their own way, and using Lana's camera to capture the journey. The four-week ride begins July 3 leaving Brooklyn and ending in San Francisco. Follow along with #HwyRunaways.

Let's hope this event becomes an annual one.

Sirens & Sportsters

2015-09-27T07:32:00.001-07:00

2016 FORTY-EIGHT

NEW 2016 SPORTSTERS!

2015-09-26T16:33:00.000-07:00

2016 IRON 883 (this one's on my wish list)

2016 SEVENTY-TWO

2016 FORTY-EIGHT

2016 SUPERLOW-1200T

2016 1200 CUSTOM

For more info visit www.Harley-Davidson.com

New bikes, new gear:

Black Seamless Skull Face Tube Mask

Coyote Gloves

Garmin nüvi GPS

Sirens & Sportsters

2014-10-28T08:08:00.004-07:00

2015 SPORTSTERS

2014-10-27T20:16:00.000-07:00

2015 Harley-Davidson XL 1200T SuperLow Colors/Price (MSRP):

Vivid Black – $11,799
Solids – $12,149
Two-Tone – $12,349
Custom – $12,499

2015 Harley-Davidson XL 883L SuperLow Colors/Price (MSRP):

Vivid Black – $8,249
Solids – $8,599
Two-Tones – $8,799

2015 Harley-Davidson XL 883N Iron Colors/Price (MSRP):

Solids – $8,399
Hard Candy Custom – $9,149

2015 Harley-Davidson XL 1200C Custom Colors/Price (MSRP):

Vivid Black – $10,649
Solids – $10,999
Two-Tone – $11,199

2015 Harley-Davidson XL 1200X Forty-Eight Colors/Price (MSRP):

Vivid Black – $10,749
Solids – $11,099
Hard Candy Custom – $11,199

2015 Harley-Davidson XL 1200V Seventy-Two Colors/Price (MSRP):

Solids – $10,849
Hard Candy Custom – $11,599

General features in the 2015 Sportster line-up include (some vary by specific model and options):

Evolution V-Twin powertrain with Electronic Sequential Port Fuel Injection (ESPFI)
Rubber-mounted powertrain to reduce vibration
5-speed Transmission
Dual staggered exhaust
Disc brakes
Mid-mounted foot controls
Handlebar-mounted electronic speedometer

For additional information, visit Harley-Davidson.

Sirens & Sportsters

2014-10-27T08:49:00.000-07:00

Forward unto the Future

2014-10-26T11:48:00.002-07:00

So, Harley-Davidson's Project Livewire rolled into town. And I wanted in.

DREAM BUILD PART I: 2044 XR1200 Cafe Racer

2014-01-06T15:25:00.002-08:00

Ever watch those corny bike-builder "reality" TV shows and think, "I could have built a way better bike." Or, do you ever walk up to your bike and wish you had a few thousand dollars laying around to build your dream bike?

You probably already have a list of parts in your head you'd like to try out: they're in your head because if your ever wrote them down or bookmarked them on the family PC your wife (or husband - lady bikers are doing it for themselves now a days you know) might find them and remind you of your responsibilities and family obligations, blah blah blah, nag nag nag... But if you only had the time and money!

Yea, I have those feelings too.

Hi, my name is Solosaddle, and I'm a modaholic... There should really be a support group for people like us lol.

Today I'd like to talk to you about a dream build of mine. The theme for this build would be Custom Cafe Racer of the Future: retrofitting a cafe racer with technology from the future... Follow me... Imagine 30 years from now in the year 2044. A middle aged, recently divorced, blogger is left with little more than the family dog (Harley) and a 2010 Harley-Davidson Sportster XR1200. With seemingly nothing else to live for, the blogger begins madly bidding on parts from eBay (with what little saving was left from said blogger's portion of the family property) and procured parts and labor, at local motorcycle swap meets, with trade, barter and promises of various unethical favors. After months of trial, error, blood, sweat, chrome and matte black paint, the blogger finally finished the dream build. And oh, is it a beautiful thing to behold.

In the future I like to imagine that we have done away with mechanical gauges and have fully embraced (and can afford) electronic measuring instruments. So the traditional instrument cluster could be replaced with a simple LED cluster or go all out on a full touchscreen panel. So today it would be akin to replacing the instrument cluster with GaugeFace.

I'd also like to think we'd have done away with lamps/bulbs and have fully embraced LEDs. Personally I'd go for something different, more angular than the traditional round headlamp. Using parts from today I'd go with a 36w LED work light. I've only seen something like this once on a bike in a forum somewhere (can't seem to find it anymore) but I always thought it was the most beautiful front-end I'd ever seen. Not entirely sure how effective it would actually be as a headlight but dammit it's just too bad ass not to try out!

Still on the front end of things, I was thinking a number-plate (normally seen on dirt bikes) would give the bike a nice look and complement the angular edges of the headlight. Plus, how cool and ergonomic (because in my vision of the future ergo is the new black) would it be to do away with todays LED bulbs and use LED strips installed right onto the number-plate. So you would have both high and low beams plus indicators affixed to the number-plate, a light-cluster if you will. This design scheme would be repeated on the tail end as well: brake light and indicators clustered together on a single plate. Not the license plat, mind you, those have gone the way of paper IDs: just as everyone (in this version of the future) is implanted with RFIDs so are most electronics, automobiles and motorcycles -all law enforcement need do is point their GoogleGlass in your direction then the bike's unique RFID-liscense-plate pops up on their HUD. I'm sure I lost of few of you just now on the design but I'm sure if it's done right it would look bad ass. Check the diagrams below to get an idea of what I mean.

Much like the retrofitting builds of today this future blogger -obviously in the midst of a midlife crisis- aimed to streamline the bike as much as possible. In 2044 I'd imagine that this biker would remove the combustion engine (recently banned all over the United States -which now includes Canada, long story- except for Texas -go figure right- and retrofit it with an electric faux-Twin engine. Now, imagine how clean the mugshot of a bike like that would look sans the muffler. Think about it, no combustion, no muffler. Take that even further: no muffler, no protruding indicators, no mirrors. How clean would that look? Super clean...

To pull that look off today you'd need to get a little creative with the muffler and the mirrors. An electric engine isn't as feasible today as they will be tomorrow. So, for now we're stuck with the V-Twin. But that doesn't mean we can't get rid of the muffler. Or at least tuck it out of the way. DP Customs pulled the look of perfectly (see examples below). Again, continuing the angular look with that boxed out exhaust. Though, it does look good tucked under the bike like that I worry what longterm exposure to engine exhaust would do to the rear tire. I'd have had the exhaust port pointing out of either side of that boxed-out tube. But I'm no bike-builder so wtf do I know lol. Looks great though...

As far as the mirrors go, still haven't really worked that out. However, in my vision of the future cameras have all but replaced mirrors. In the states that still enforce helmet laws riders would have cameras installed on their bikes and riding gear. The live feed would then be played back inside the HUD of their helmets. Funny enough, this tech exists today. But, it's not as clean and minimal as I imagine it to be in the year 2044. Here are a couple of examples, Reevu and Skully Helmets. And, for the states without helmet laws, GoogleGlass (or something like one). I'm sure by 2044 there'd be a rearview camera stock on the device: dubbed the anti-creaper-cam. I've contemplated using one of the above mentioned helmets instead of mirrors but as we all know in most every state at least one mirror must be installed on the bike. So there goes the mirror-less profile.

That's pretty much it. There's not much else I would modify or upgrade on a stock XR1200.

And so, finally done with the build (and alimony payments ironically) the blogger -on a newly retrofitted custom XR1200 cafe racer- and his dog (riding it's turbo charged Segway, cause pets in the future own Segways -laugh now but you just wait and see!) head off into the sunset. To find love, coffee, adventure and the meaning of life...

Illustrator skills finally starting to pay off, lol...

Rear-end light-cluster

I imagine a display like this sitting flush on a plate affixed to the handle bar mount

Oh so sexy

Minimal and clean. I imagine the end result to look something like this but just a tad bit more... minimal lol

2014 SPORTSTERS

2014-01-04T16:44:00.003-08:00

2014 Feature:

New Brakes
Optional ABS
Integrated Electrical System
H-D Smart Security System
New Exhaust Emissions Features
H-D1 Factory Customization

New Colors and Graphics:

Eleven new colors and two-tone color combinations, plus new graphics, will be offered on the 2014 Sportster models. Not all colors are available on each model.
Three new Hard Candy Custom metal flake colors: Hard Candy Volcanic Orange Flake, Hard Candy Voodoo Purple Flake, Hard Candy Chrome Flake.
Five new solid colors: Amber Whiskey, Blackened Cayenne, Morocco Gold, Mysterious Red Sunglo, Charcoal Pearl.
Three new two-tone color combinations: Mysterious Red Sunglo/Blackened Cayenne Sunglo; Amber Whiskey/ Brilliant Silver; Charcoal Pearl/ Vivid Black.

For more detailed info visit www.Harley-Davidson.com
Also, the first thing your going to want to customize are those pipes: a couple of Vance and Hines Side Shots will do the trick nicely... Trust me.

Maidens, Motorcycles and Mossbergs

2013-08-10T18:05:00.001-07:00

There's only one thing I love more than Sportsters. A beautiful woman riding a Sportster.

No. Wait.

A beautiful woman on a Sportster armed with a shotgun: check out Dead Ahead for iOS and see what I mean.

I follow these vivacious vixens on Instagram: @venicevixens they ride mostly Triumphs and Sportsters and look damn good doing it too.

In The Wild

2013-08-03T12:11:00.000-07:00

Spotted this cutie in Queens NY. Not really a fan of the paint scheme but I almost bought that same seat and sissy bar. Feeling the highway bar though.

It's Been A Long Time, I Shouldn't Have Left You

2013-08-02T07:27:00.000-07:00

I'm Back!

GaugeFace For iOS

2012-02-27T07:04:00.003-08:00

Have iPhone, have sportster, will ride... Got to get one of these!
Cost about $260 (msrp) and adds tons of functionality left off stock Sportsters.

Installation is easy

Plug into your Harley-Davidson motorcycles data (diagnostics) port.
Tuck the GaugeFace® Hardware Adapter under your seat or secure it elsewhere. Run the iPod cable up to your handlebars and make sure not to run it on the same side as your spark plugs. Use zap straps to ensure the iPod cable is secured.
Use a mount of your liking (not included) to hold your iPod touch or iPhone and plug the GaugeFace® iPod connector in.

Check out GaugeFace.com for more info.

Wild Motorcycles' The SpaceSter

2011-10-04T19:13:00.000-07:00

KICK-ASS

2011-09-22T06:55:00.001-07:00

5 Ways to Save $$$ on Gas (From a Biker's Point of View)

2011-09-03T09:06:00.000-07:00

One of the many joys of motorcycling is the amount of $$$ you can potentially save on gas. I spend roughly $10 a week (most times less) traveling back and forth between home, work and school. Nonetheless, With gas prices still doubling what they used to be in the 1990s (I remember when my mother used to complain about $2.19 for premium) it helps to save a buck or two. Here's 5 easy ways you can save $$$ on gas:

Travel light. I mean when you think about it it just makes sense, physical science 101. The less "work" the engine has to do the less gas it needs to do it.
Smooth out your riding. If you're not engine braking you should be. Dead stops and starts are where combustion engines lose the most gas. The less you brake the less work the engine will need to do later when you decide to accelerate. This saves you gas in the long run. Keep your eye on, not only, the car ahead of you but the car ahead of that car and so on. That way when the third car ahead of you decides to brake you can anticipate that the two cages behind that one will do the same, which leads me to the next tip;
Sloooow dooown. No seriously take it easy on the throttle and shift early. I've been practicing this for a few months now and it works. For example, I only use 1st gear to pull away from a dead stop, I don't even let it get past 15mph before I shift to 2nd. Same with 2nd, before I hit 30mph I'm in 3rd and so forth. For the past few months my bike hasn't been over 60mph and that lets me squeeze almost 200 miles (68mpg) out of my 2010 883 - if I ignore the gas lamp for 50 miles. Now I know what you guys and gals are thinking, "Whats the point in that, if I wanted to scoot down the highway then I would have bought a scooter!" I hear you and believe me I feel the same way but I'm on a tight budget. I literally, financially and metaphorically can't afford to go any faster... I must admit though, there are some days however, I piss on my budget and let the throttle loose! I CAN DRIVE 65!
Efficiency maintenance. If the engine runs optimally then the engine runs efficiently. I shouldn't have to tell you that maintaining your Sportster will save you $$$ not only on mechanical issues that could pop up but you'll also save money on gas. Check your tires, check your air filter, check your gas cap, check your oil, check your Harley stock ;)
Have fun. Motorcycling is supposed to be fun. Constantly having to watch the gas needle instead of the amazing vistas you can only get from atop an iron [883] horse is not fun. It negates the whole point of owning a Sportster. If you want to save a little $$$ however, just keep these tips in mind.

Ride safe.

Happy Labor Day Weekend Everyone!

2011-09-03T09:02:00.000-07:00

Kiss the cook... ;)

Rat Bike Loving

2011-08-18T05:16:00.000-07:00

NEW 2012 SPORTSTERS!

2011-07-30T04:39:00.000-07:00

New Sportsters have arrived. Check out HD's site for info and more links below from TotalMotorcycle.com for extensive reviews and breakdowns of these new models...

Harley-Davidson.com 2012 SPORTSTERS!

TotalMotorcycle.com Reviews• 2012 Harley-Davidson XL883L Sportster 883 SuperLow
• 2012 Harley-Davidson XL883N Iron 883
• 2012 Harley-Davidson XL1200X Forty-Eight 48
• 2012 Harley-Davidson XL1200C Sportster 1200 Custom
• 2012 Harley-Davidson XL1200N Nightster
• 2012 Harley-Davidson XR1200X

Wait, you want to come too?

2011-07-26T12:36:00.000-07:00

You Sportster owners know the deal. Your heading out for a ride and your significant other wants to tag along with you. If you own a Sportster your brain automatically goes into a bit of algebraic calculation; the bike only gets 45c/60h mpg but thats if your not carrying a passenger and your traveling light, so 45/60 ÷ 2 = 22.5c/30h... Ouch, looks like it's going to be a short trip. Might want to carry a few of these:

;)

2011-07-13T17:25:00.000-07:00

HAPPY 4TH and SAFE RIDING EVERYONE!

2011-07-04T12:25:00.000-07:00

Mica: Iron Girl

2011-06-30T10:04:00.001-07:00

Under Bar How To:

2011-06-22T06:53:00.000-07:00

Cool huh? Here's how it happens:

To begin with, here is how this motorcycle looks with the stock mirrors…

A closer look reveals that the mirror is bolted underneath the handlebar using a single 13mm nut close to the turn signal. Here is a close-up of this nut.

Starting with the left mirror (from riding position), I used a small ratchet with a 2″ extension and a 13mm socket you see here:

After removing the left mirror (as seen from the riding position), we can see that apart from the 13mm nut, there is also a washer of the same size. Pay attention not to lose it because it is used to securely lock the nut.

I have intentionally started from the left one because the right one is more tricky to remove. The right one is harder because of the brake and throttle lines as well as the turn signal which is very close to the mirror’s bolt. To avoid scratching your paint or having difficulties removing the nut, I suggest using a 13mm open-end wrench.

Now that you have both mirrors out, start by installing the left (from riding position). To do this, take the mirror you removed from in the previous step from the right side and flip it over. Yes, it is as simple as that!

Moving to the right side, it is more tricky due to the previously mentioned lines and turn signal. Because of the position of the right turn signal it is impossible to insert the mirror underneath the handlebar. To do this, you simply remove the turn signal temporarily which is a very straightforward task.

Locate the small hole shown in the following picture.

In this hole, there is a 4mm Allen (hex bit) bolt. Use an equivalent wrench head to unscrew it.

You don’t have to completely remove the bolt. Just loosen it up enough to release the signal light.

With all the required free space, just install the right mirror and adjust it to the vision field you’re comfortable with. Then re-install the signal light.

If you happen to have a torque wrench which I highly recommend to get one if you don’t have, you must tighten the mirrors’ nuts to 16 Nm. Hopefully, the end result should be something like this:

Apart from the aesthetics improvement, this modification also assists on a better vision field. The stock mirrors are short and most riders (including myself) do not have clear view due to the arm’s (more specifically elbow) position.

Remember to check that there is enough clearance space between the gas tank and the mirrors when flipped. This modification cannot be applied to some bikes with large gas tanks. Just turn the handlebar left/right to make sure it doesn’t hit the gas tank.

Anyway, I hope you find it useful. :)

Happy Fathers Day

2011-06-19T06:19:00.000-07:00