ThousandsTutor

Boot Winxp Fast

noreply@blogger.com (1001tutor) — Sun, 04 Apr 2010 08:15:00 +0000

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

No Text Icons

noreply@blogger.com (1001tutor) — Sat, 03 Apr 2010 08:35:00 +0000

If you would like your desktop Icons to have no text underneath then try this tweak:

Right click the icon and select Rename

Now hold the Alt key and type 255 and hit Enter

NOTE : It may only work with the keypad numbers
and not the number keys on top of the keyboard.

Quick Shutdown 4 Xp

noreply@blogger.com (1001tutor) — Fri, 02 Apr 2010 08:38:00 +0000

Ever want a quicker way to shutdown XP without navigating through the start menu, or using a third party shutdown utility Here is a script that will do just that.

Right click the desktop and choose New Shortcut. Copy and paste this script or type it in.

%windir%System32shutdown.exe -s -t 0

Choose Next and name it whatever you like. I name mine OFF. Click Finished. Right click and choose properties and pick a Icon for it if you'd like. I use a wall light switch Icon. I drag mine into my QuickLaunch toolbar for one click shutdown.

Enjoy!

How To Speed Up A Slow Computer

noreply@blogger.com (1001tutor) — Thu, 01 Apr 2010 08:51:00 +0000

First off in the bottom right hand corner of your computer if you see alot of icons start up there when you first start your computer then this is for you if you dont know already how to get rid of em.

Press your Start Button (bottom left) and go to "run"
now type in: msconfig

Now you will get a box that pops up and will tell you bunch of stuff dont mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.

Now you will have a closed in box with bunch of filenames n addresses and more boxes with checks in them. Now if your like me you dont want anything startin up when you start you computer up or while your even doing anything cause it slows you down.

Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my settin for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.

Either way when you shut it off and then turn it back on the settins will kick in

IP address All About

noreply@blogger.com (1001tutor) — Sat, 28 Mar 2009 04:30:00 +0000

I can see you hiding in the shadows over there and so can the logs of all the web sites, FTP servers and other nooks and crannies you visit on the web.

The sort of information gathered by these logs and which is available to the webmasters of the sites you visit include the address of the previous site you visited, your IP address, your computer's ID name, your physical location and the name of your ISP along with less personal details such as the operating system you're using and your screen resolution.

If someone was snooping through your dustbin to gather information on consumer trends or tracking your every move to see where it is you go everyday you wouldn't be too chuffed would you. Well the web is no different, it's still an invasion of privacy and a threat to security and you don't have to put up with it.

Every time you visit a web site, detailed information about your system is automatically provided to the webmaster. This information Usually used by hackers to exploit the computer or can be forwarded to the market research departments of consumer corporations who by tracking activities on the internet are better equipped to direct more relevant spam at you.

Have fun, Dead Dreamer!

Change Your Ip In Less Then 1 Minute

noreply@blogger.com (1001tutor) — Thu, 26 Mar 2009 08:42:00 +0000

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"

3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"

5. Type "exit" and leave the prompt

6. Right-click on "Network Places" or "My Network Places" on your desktop.

7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab

10. Click on "Use the following IP address" under the "General" tab

11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).

12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.

13. Hit the "Ok" button here

14. Hit the "Ok" button again
You should now be back to the "Local Area Connection" screen.
15. Right-click back on "Local Area Connection" and go to properties again.

16. Go back to the "TCP/IP" settings

17. This time, select "Obtain an IP address automatically" tongue.gif

18. Hit "Ok"

19. Hit "Ok" again

20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:This only changes your dynamic IP address,
not your ISP/IP address. If you plan on hacking a website
with this trick be extremely careful,
because if they try a little,
they can trace it back

Create A Huge File

noreply@blogger.com (1001tutor) — Tue, 24 Mar 2009 08:44:00 +0000

You can create a file of any size using nothing more than what's supplied with Windows. Start by converting the desired file size into hexadecimal notation. You can use the Windows Calculator in Scientific mode do to this. Suppose you want a file of 1 million bytes.

Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits—000F4240.

Now open a command prompt window. In Windows 95, 98, or Me, you can do this by entering COMMAND in the Start menu's Run dialog; in Windows NT 4.0, 2000, or XP enter CMD instead. Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. Type RCX and press Enter. Debug will display a colon prompt.

Enter the last four digits of the hexadecimal number you calculated (4240, in our example). Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). Enter W for Write and Q for Quit. You've just created a 1-million-byte file using Debug. Of course you can create a file of any desired size using the same technique.

Bypass Internet Cencorship

noreply@blogger.com (1001tutor) — Tue, 24 Mar 2009 08:39:00 +0000

I remember not so long ago someone was asking about ways to get around and view sites that were blocked by the administrators, or some web filtering device, either at work or at school, hope this helps.

www.zensur.freerk.com

Why wait 35 Seconds at eZshare

noreply@blogger.com (1001tutor) — Thu, 19 Mar 2009 20:07:00 +0000

Guys..

the eZshare site, uses a simple javascript function to encode the generated url link and make us wait for 35 seconds before its decoded and shown. Instead of waiting one can view the source of the page and copy the contents that start with 'unescape'

for example

Code:

unescape('%3C%68%32%3E%3C%66%6F%6E%74%20%63%6F%6C%6F%72%3D%22%23%43%43%30%30%30%30
%22%3E%20%44%6F%77%6E%6C%6F%61%64%3A%3C%2F%66%6F%6E%74%3E%20%3C%61%20%68%72%65%
66%3D%22%68%74%74%70%3A%2F%2F%65%7A%73%68%61%72%65%2E%64%65%2F%66%69%6C%65%73%2D
%65%6E%2F%31%39%38%33%33%38%2F%31%38%34%2F%69%70%69%63%6F%6E%7A%2E%72%61%72%22%3E
%69%70%69%63%6F%6E%7A%2E%72%61%72%3C%2F%61%3E%3C%2F%68%32%3E')

and can use a simple decoder html page. I found one at

Code:

http://www.linkedresources.com/tools/unescaper_v0.2b1.html

it works offline..as it uses only javascript..so you guys can save it.

Instead of viewing the source ..copy'g ...converting... i wrote a small VB app which does that...just paste the link
eg.

Code:

Http://ezshare.de/files-en/199567/ezShare.rar.html
in the text field and click 'Get Link', the app copies the download link to clipboard.

The app does not contain any malicious code...the code is also in the rar file, in order to run extract the .exe and .html in a directory and run the exe.

The app does not contain any error checking code.. if it does throws any errors..just open the code..its simple Wink

Code:

http://ezshare.de/files-en/199567/ezShare.rar.html
or
http://ezshare.de/files-de/199567/ezShare.rar.html

Using Rapid Share, How to use them and skip the BS

noreply@blogger.com (1001tutor) — Thu, 19 Mar 2009 20:05:00 +0000

After you put up your download - or someone else along

go to the download page, click Free - on this next page where the timer comes one - view source

Go down the view source to the end - grab the gobbly gook looking text (I cant get to it right now cause I am locked out for an hour otherwise I would show an example - its obvious - near the bottom)

go to

CODE

http://sportsforum.ws/encode

paste it on the third line down (bottom line)

hit submit - second line down will now have an actuall link

You have requested the file phpscripts_01.rar (18627251 Bytes). This file has been downloaded 450 times already.

IMPORTANT: Download-accelerators

%3C%68%32%3E%3C%66%6F%6E%74%20%63%6F%6C%6F%72%3D%22%23%43%43%30%30%30%30%22%3E%20%44%6F%77%6E%6C%6F%61%64%3A%3C%2F%66%6F%6E%74%3E%20%3C%61%20%68%72%65%66%3D%22%68%74%74%70%3A%2F%2F%64%6C%31%2E%72%61%70%69%64%73%68%61%72%65%2E%64%65%2F%66%69%6C%65%73%2F%33%36%34%33%33%32%2F%31%39%39%2F%70%68%70%73%63%72%69%70%74%73%5F%30%31%2E%72%61%72%22%3E%70%68%70%73%63%72%69%70%74%73%5F%30%31%2E%72%61%72%3C%2F%61%3E%3C%2F%68%32%3E'

You want just that part

It's quite simple, when you want to download something that's on rapidshare, do the following:

1. go to the rapidshare link and click 'free' (so not the premium thing)
2. on this page, there's a counter that counts down from a specific amount of time before it displays the download link, view the source of this page
3. at the end of the source, there's a line with lots of numbers and % symbols, copy this line
4. go to sportsforum.ws/encode and paste the line you copied, onto the line
5. click encode now
6. direct link is shown

are only supported with a PREMIUM-Account!

Unlimited Rapidshare Downloads

noreply@blogger.com (1001tutor) — Thu, 19 Mar 2009 20:03:00 +0000

Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:

clean up IE or netscape cookie( In this case the one that belong to rapidshare website)
On Command prompt
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter

Or save these commands in a bat file and run it everytime you need to fool Rapidshare server.Remember to clean up rapidshare cookie in your temp Internet files folder.

Now you should be ready to download as many files as you want from their server.

And there is this cool link: paste it in the browser and see

CODE

http://www.google.com/search?lr=&as_qdr=all&q=+.rar+OR+.zip+OR+.pdf+OR+.exe+site%3Arapidshare.de