TI - New Interface Products

SN65HVD1040-HT High Temp Industrial CAN Transceiver with Ultra Low Power Sleep mode and Remote Bus Wake-up

Fri, 23 Dec 2011 00:00:00 -0600 (GMT -0600)

The SN65HVD1040 meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a Controller Area Network (CAN). As CAN transceivers, these devices provide differential transmit and receive capability for a CAN controller at signaling rates of up to 1 megabit per second (Mbps). The signaling...

SN65HVD255 CAN Transceiver with Fast Loop Times for Highly Loaded Networks

Fri, 16 Dec 2011 00:00:00 -0600 (GMT -0600)

This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. It is designed for data rates in excess of 1 megabit per second (Mbps) in short networks and enhanced timing margin and higher data rates in long and highly loaded networks. The device includes many protection...

SN65HVD256 CAN Transceiver With Fast Loop Times for Highly Loaded Networks

Fri, 16 Dec 2011 00:00:00 -0600 (GMT -0600)

DS80PCI402 PRODUCT BRIEF 2.5 Gbps/5.0 Gbps/8.0 Gbps 4 Lane PCI Express Repeater w/ Equalization & De-Emphasis

Wed, 23 Nov 2011 00:00:00 -0600 (GMT -0600)

The DS80PCI402 is a low power, 4 lane repeater with 4-stage input equalization, and output de-emphasis driver to enhance the reach of PCI express serial links in board-to-board or cable interconnects. Ideal for x4 (or lower) PCI express configuration, the DS80PCI402 automatically detects and adapts to Gen-1, Gen-2 and Gen-3...

TLK110 Industrial 10/100 Ethernet PHY

Fri, 16 Dec 2011 00:00:00 -0600 (GMT -0600)

The TLK110 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. It integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct...

TCA4311A Hot Swappable 2-Wire Bus Buffers*

Wed, 04 Jan 2012 00:00:00 -0600 (GMT -0600)

The TCA4311A is a hot swappable I2C bus buffer that supports I/O card insertion into a live backplane without corruption of the data and clock busses. Control circuitry prevents the backplane from being connected to the card until a stop command or bus idle occurs on the backplane without bus contention on the card. When...

TCA9554 Remote 8-Bit I2C and SMBus I/O Expander

Thu, 29 Dec 2011 00:00:00 -0600 (GMT -0600)

This 8-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 1.65-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface [serial clock (SCL), serial data (SDA)]. The TCA9554 consists of one 8-bit Configuration...

TCA7408 Low-voltage 8-bit I2C I/O Expander with Interrupt Output Reset I/O Direction Registers

Tue, 13 Dec 2011 00:00:00 -0600 (GMT -0600)

This 8-bit I/O expander for the two-line bidirectional bus (I2C) is designed to provide general-purpose remote I/O expansion via the I2C interface [serial clock (SCL) and serial data (SDA)]. The major benefit of this device is its wide VCC range. It can operate from 1.65V to 3.6V on the GPIO-port side and...

SN65HVDA100-Q1 LIN Physical Interface

Thu, 01 Dec 2011 00:00:00 -0600 (GMT -0600)

The SN65HVDA100 is the Local Interconnect Network (LIN) physical interface, which integrates the serial transceiver with wake-up and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data rates between 2.4 kbps and 20 kbps. The LIN...

SN65LVCP114 14.2Gbps Quad Mux, Linear-Redriver with Signal Conditioning

Tue, 31 Jan 2012 00:00:00 -0600 (GMT -0600)

The SN65LVCP114 is an asynchronous, protocol-agnostic, low-latency QUAD mux, linear-redriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 linear-redriver is designed to work effectively...

SN65LVDS050-Q1 Automotive Catalog High-Speed Differential Line Drivers and Receivers

Fri, 16 Dec 2011 00:00:00 -0600 (GMT -0600)

The SN65LVDS179, SN65LVDS180, SN65LVDS050, and SN65LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude...

UA9638C-EP Enhanced Product Dual High-Speed Differential Line Driver

Fri, 23 Dec 2011 00:00:00 -0600 (GMT -0600)

The uA9638C is a dual high-speed differential line driver designed to meet ANSI Standard EIA/TIA-422-B. The inputs are TTL and CMOS compatible and have input clamp diodes. Schottky-diode-clamped transistors are used to minimize propagation delay time. This device operates from a single 5-V power supply and is supplied...

SN65HVD09-EP Enhanced Product 9ch - RS-485 / RS-422 Transceiver

Fri, 23 Dec 2011 00:00:00 -0600 (GMT -0600)

The SN65HVD09 is a 9-channel RS-422 / RS-485 transceiver suitable for industrial applications. It offers improved switching performance, a small package, and high ESD protection. The precise skew limits ensures that the propagation delay times, not only from channel-to-channel but from device-to-device, are closely...

SN65HVD37 3.3 V Full-Duplex RS-485 Drivers and Receivers

Wed, 14 Dec 2011 00:00:00 -0600 (GMT -0600)

The SN65HVD37 combines a robust differential driver and a receiver with high noise immunity for demanding industrial applications. The driver differential outputs and the receiver differential inputs are separate pins, to form a bus port for full-duplex (four-wire) communications. The driver and receiver can be...

TL16C2550-Q1 Automotive Catalog 1.8-V to 5-V Dual UART with 16-Byte FIFOs

Wed, 28 Dec 2011 00:00:00 -0600 (GMT -0600)

The TL16C2550 is a dual universal asynchronous receiver and transmitter (UART). It incorporates the functionality of two TL16C550D UARTs, each UART having its own register set and FIFOs. The two UARTs share only the data bus interface and clock source, otherwise they operate independently. Another name for...