How To Fix & Repair Things Yourself

Quit Smoking With The Article Here Today!

2018-04-16T14:23:00.003-07:00

It can be hard to quit smoking because nicotine and the other things in cigarettes make it hard to do so. If this is something you've been trying to do, then you need some good advice about it. Take a moment to go over these tips and you should be set.

Make sure you quit smoking on a day when you know you won't be bothered too much by things like work or other people. You're going to need to let people know that you're trying to quit, and that you don't want them to be around you if they're going to be smoking. When you pick a day to quit if you can make it not a stressful day that would be the best. This is because when you get stressed out you're going to end up wanting to smoke which isn't good.

You may have some luck if you buy something like nicotine patches or the nicotine gum. The way these things work is that you use a higher dose of nicotine when you first are quitting, and then you use a lower dose after a while. Then, eventually, you're going to be able to quit all the way. It works well for a lot of people, so give these things a try. There are also electronic cigarettes that you can use in the same way, you just have to make sure you step down to devices that contain less and less in the way of nicotine.

Try your best not to be around people that are going to be smoking. If you used to go on smoke breaks at work you can still take a break, just bring a book or something and find a place to relax away from the smoking area. There's no reason to get near smokers because then it's easy for you to ask them if you can have a cigarette. If this happens then you're likely to get back into smoking, and that's why it pays to spend as much time away as you can from smokers.

Get online and check out stories of people that have cancer and other complications due to their smoking habit. This can really shock you because a lot of people have been hurt by smoking and you can really tell when you see how bad of shape that they are in. You really don't want to end up that way and you'll probably get a good dose of reality when you notice what they had to go through. Be careful about smoking now because if you're not in the future you could end up like a person you never thought you'd be as sick as.

As you're able to tell now, you can quit smoking once you have the right information on hand. You need to take a moment to work hard at this and you'll do just fine. Don't worry if you mess up and get on with your life so you can quit smoking soon!

How To Fix a Plasma TV That Wont Turn On

2017-08-06T15:22:00.001-07:00

If you have woke up one morning and your plasma TV wont turn on, the first thing you should check is if the plug is switched on. Not everybody is fully alert in the morning and something as silly as not turning on the switch can be the cause to the problem. However, if you have checked the switch, make sure the power cord is plugged firmly into the back of the plasma TV. I say this because anybody could have slightly tripped over it and pulled it slightly from the back, its easy done by kids around the house. If you have checked the basics, including using another plus socket and your plasma TV still fails to turn on, then you will need to carry out technical troubleshooting.

The mains reason why most plasma TVs wont turn on is because of weak or dead power capacitors. These are fitted onto the power board inside and can be replaced by anybody with good soldering skills. They cost like 50p each to replace and there are around 5-6, so its certainly cheaper replacing the complete power board and of Couse cheaper than buying a brand new TV. You can tell if you have bad power caps by looking at them. If they look like they are going to burst from the top, that is an obvious sign that they need changing. You don't always need a multimeter to tell.

1) Ensure that there has been no power to your TV within 24 hours. This is because you don't want to handle the power board while there is still charge in the power caps. This won't kill you but it will provide you with a little surprise.

2) Remove the TV from the stand. Place it flat down or standing up depending on what space you have around your home available. Remove all the small screws that are on the rear panel, you may want to use an electrical screwdriver to speed to process up as there are loads on most LG and Samsung TVS.

3) Carefully remove the rear panel, handle slowly it can have sharp edges. Once you have removed it place it outside out of the way.

4) Now that you have done this, located the power board. Use online diagrams to help you find it. Take a picture of it using your phone, this is so you know where the plugs go in case you forgot. Now remove any cables that are plugged into it. There will also be a few more screws hold it in place, so you will need to remove them.

5) Now you have access to the power board, remove all the old caps by desoldering them off the board one by one. Line up your new caps, the same away the old ones were fitted and solder them in. Its as simple as them, recheck all your soldering before you place the repaired power board back into the TV.

How To Make Your Plasma TV Cheaper To Run on Electricity

2017-07-24T13:43:00.001-07:00

Newer televisions seem to provide far more efficient electricity composition. If you have an older style plasma TV, you will notice that your electricity bill will be sky high. They are power hungry due to the screen requiring most of the power to operate. This is why TVS these days have switched to OLED as this technology provides just a good picture with half the operating cost. If you still want to keep your old plasma TV, you can still make a few changes to save money on using it. The best thing I like about old plasma televisions is that they are durable and the have good speakers because they have more space inside to add bigger parts. This is why I still wanted to keep mine, but I just could not afford to use it every day, it was worse than my 6.0 mustang. These are my top tips to save electricity using any plasma tv.

Reduce the brightness

The screen is what takes most of the power up. Go into the tvs menu settings and reduce the contrast and brightness to less than half. This will save up to 50% on electricity. It’s a simple and effective trick that I found out on my own tv. It had a power saving mode built inside it and when enabled it reduced the brightness of the screen.

Dont use HD

If you have a 1080p plasma and you are using a HDMI cable, the components inside will be working extra hard to deliver. Using a standard scart cable for normal viewing will also contribute towards saving costs. How I do it is use the scart for watching SKY and using HDMI for gaming because most of the time the tv in my household will be used for watching regular TV programs such as news and movies.

Switch off the TV when not in use

When you are not using your TV its best to turn it off from the mains. Even if you place it in standby mode it will still be consuming electricity. It will also increase the lifespan of the small capacitors on the internal board.

Combining these tips together will make any plasma tv big or small reduce its operating costs. I know how much these types of televisions take in terms of money to run because I have an old 60 inch Samsung TV that is based on plasma technology. I was close to selling it to buy a newer more efficient LED TV because of its expensive operating costs, however with these tips is was able to save some money, so you should as well.

How To Connect Computer To LCD Plasma TV With HDMI

2017-06-06T12:49:00.000-07:00

If you have a spare LCD plasma screen TV that has a HDMI connection, you can usually connect your computer or laptop to an external display. Let me explain signals. HDMI is digital and so is DVI, the older VGA style block pin connectors are analog. Now to get your LCD screen technically working with your computer it all depends on what signal your graphics card can provide. If it has either a HDMI or DVI port, then it will work with a HDMI TV. In most cases LCD Plasma tvs also support VGA, so it’s the matter of using a different cable usually.

1) Plug in your HDMI cable into the port on the graphics card.

2) Look at the back of your LCD plasma TV. Next to the socket were the power cord goes into, you should see an HDMI port identical to the one of the graphics card. All you need to do is connect the other end of the HDMI cable into it.

3) Once you have made a connection your setup hardware wise. All you need to do is place your TV into HD mode using the remote control. Then you might need to go into control panel to adjust the screen resolution so that the LCD screen can display the best picture quality.

How To Reset Android Tablet With Broken Screen

2017-06-04T11:22:00.001-07:00

If you are selling your broken screen Android tablet to a shop, you may want to delete all your personal information. This can be content such as videos and images. If you are wondering how you can reset your Android tablet with a broken screen, you will need to get into the recovery menu. You will have to use the volume buttons and the power button to confirm the reset. We have the exact instructions for you to follow to make it easier for you. Since you can't see the information on the screen we have recorded all the steps one by one.

1) Turn off the tablet.

2) Hold the power, volume up and down buttons for a few seconds.

3) This will bring your Android tablet into recovery mode.

4) One most tablets it’s the fourth option down. So, press the down button of the volume four times.

5) Click the power button to select it.

6) Now press the volume button eight times, this will make the tablet go onto the 'Yes delete user data' option.

7) Press the power button again. This will make it select yes. Once you have done that your Android tablet with a broken screen will be reset back to factory settings and all data will be wiped off it.

How To Fix Crackling Faulty Portable Speakers

2017-06-03T06:28:00.000-07:00

Connecting your portable speaker to whatever device will provide a better sound experience, with louder volume and more bass. Portable speakers usually sound better because they are larger in size and speakers that fit into small smartphones and mp3 players are not that good. Sometimes with portable speakers, you can run into more problems. A common problem is the crackling you get when sound is playing. Sometimes this can be caused by batteries that are weak, the amp will not have enough volts to power the speakers, resulting in crackling to be heard when the bass drops. If you have changed the batteries and your portable speakers are still making a crackling sound, then sometimes the headphone jack on your device is dirty. Dust particles can cause crackles to appear because it interferes with the signal going to the small amp inside the portable speakers.

1) Unplug your portable speakers the aux headphone socket on your device and power it off.

2) Get a Q tip or also known as a cotton bud.

3) Twist one end of the cotton side and pull it so it becomes fluffy.

4) Place the fluffy end into the headphone jack that you want to clean. Twist it around a few times and push it in and out, keep repeating this a couple of times. This will remove any dirt or dust inside the headphone jack that could cause cracking.

5) Replug your portable speakers back into the device you have just cleaned to see if the cracking is gone. If it is still apparent, then the jack itself might be faulty, so try it another device as it might need resoldering back on. If its not that the actual 3.5mm plug could be the issue, the small wires inside could be broken due to age.

How To Reset a Nokia 8310 Security Code

2017-06-01T16:26:00.000-07:00

If you have forgotten the security code for your Nokia 8310 you will not be able to unlock the phone and get access to the content on the phone. This a common problem with old phones because you setup a password leave it in the cupboard for 10 years and bring it back out forgetting the password on your Nokia phone. Thankfully, this phone is very old and there is a clever method for removing the password on your Nokia 5310 it will setup the security code back to default of 12345. Now we can't confirm that it works for all firmware software versions, but we have tested it on a few and its resets the security code on the Nokia 8310. This method was discovered by Chu Ling at CPL electronics Taiwan.

1) Hard reset your Nokia phone by pressing '* + 3+Green Call and power on the phone at the same time.

2) Your phone will start up and will ask you for a lock code. Since you don't know what it is enter it incorrectly five times. This will place the phone into restriction mode.

3)You will need to enter the following code into the phones keypad *968487221#.

4) Press the power button down three times, but don't hold it down. Take the battery out and the sim card and place them back after 30 seconds.

5) If done correctly the phone will restart and it ask you to select the language. The phone will be hard reset and the security code on your Nokia 8310 will be reset.

How To Fix Dropped Android Tablet Screen White

2017-05-31T12:10:00.001-07:00

If you have dropped your Android based tablet and the screen has gone white, blank or has faint lines on it, you might have damaged the screen from impact. Look closely at the screen for any cracks in the actual glass, if you can't see none the screen might have been saved from being damaged. The first thing to fix a dropped Android tablet is to try a quick restart, you can't reset an Android device because there is a option that you need to select on the screen.

1) Connect the USB charger into the mains and connect it into your tablet.

2) Allow the tablet to charge for 10 minutes flat. Don’t use the tablet while plugged in.

3) Press down the power button for 30 seconds without letting go.

If this doesn’t work, then in most cases what you need to do is check the screen connections. Open your tablet up, there will be a brown colour flex ribbon cable connecting the screen to the board. This can become loose if you have dropped your tablet, so the best thing to do is unplug it and plug it back in. If that doesn’t work, then in most cases the screen will need replacing. Check the repair price is because sometimes with electronics its cheaper to buy a whole new tablet instead.

How To Take Off Fidget Spinner Caps Also Known As The Middle Button

2017-05-31T11:46:00.001-07:00

A fidget spinner is a great thing to have if you want to concert better or kill some time during office lunch breaks. Every kid and adult has one these days as the trend has taken off since the start of 2017. Sometimes depending on how cheap they are, you can face problems they can become slow or make lots of noise when spinning. If you want to easily prevent throwing away your broken old fidget spinner and replace it with a new one, then you can oil the bearings or even replace them with better ones. The bearing themselves are interchangeable, so you can swap them out for fast ones or maintain it with some oil. But before you can do any of that you will need to remove the middle plastic cap, it looks like a button. We have broken a few so we are aware of how to take it off without breaking it. So i thought i will share this information with you so you can carefully take the middle bit out of the spinner without damaging anything.

1) Depending on how your fidget spinner is made cheap or expensive, taking the middle cap of could be different.

2) Grab the bottom cap and twist the top cap anticlockwise. If you keep doing this for some time, if the middle cap is screw based it will twist off. If nothing happens move onto step 3.

3) You will most likely need to pop the cap off with something. The best way to do this is to get a flat head screwdriver and place it in the gap between the cap and the actual spinner. Do this carefully, don't do it with force or you will leave marks on the plastic or risk scratching or even worse cracking it.

How To Make a Fidget Spinner Spin Faster Longer and Better

2017-05-30T13:27:00.000-07:00

All the kids and even adults carry around a fancy hand fidget spinner around with them to keep busy. Its the last crazy and the office i work in is full of people spinning while they work. Apparently, it helps make your concentrate better, the idea of creating a fidget spinner has been out for many years, however its just become popular over the couple of months starting of 2017. Now if you want to make your fidget spinner spin for longer, faster and better, you can lubricate it for better performance. All fidget spinners to the same job, it doesn't matter if its worth $20 or $1, they all do the same job which is to spin on your finger. The more expensive ones have a slightly better build quality but nothing significant that you will thick wow. Right lets get to telling you how to make your fidget spinner faster for more longer.

There is a small metal ball bearing inside the middle that allows the spinner to rotate on the middle base. From the factory, this is not lubricated at all, this can cause problems. It can lead to making your finger spinner noisy and not spin for long. The best way is to oil the ball bearing so that it can spin for longer.

Now its time to impressive your school friends on how your cheap budget fidget spinner outperforms a more costly one.

1) Position the base of the spinner upright.

2) Get sewing machine oil and unscrew the cap of the bottle, you can also use hair clipper oil as well. Don't use any kind of grease because you will be using this on your hands and the last thing you want is black greasy stuff all over your clothes.

3) Pour three to four drops of lubrication oil into the middle of the fidget spinner.

4) Once you have done that give it a quick spin and repeat adding a few more drops of oil in.

5) Wipe down the other parts of the spinner to prevent it slipping out of your hand. The metal ball bearing will now be nicely lubricated up and will spin like a $100 spinner.

How To Turn Volume Up on Tomtom XL Sat Nav

2017-05-30T13:06:00.000-07:00

If you can’t hear the volume coming from the speaker on your TomTom sat nav xl, then you will need to turn it up to an audible listening level. Most of the time the speaker is not faulty and you might have accidently turned down the volume by running your fingers over the screen while it was powered on. This happened when I was cleaning the screen on my own sat nav from the kids smutches all over it Don’t worry we will tell you how to get the volume back on your TomTom sat nav. Let’s start with the very basics first.

1) Power on your sat nav.

2) Let the maps load up onscreen.

3) Tap the bottom bar on the screen that shows the information of the maps and destination.

4) You will see a volume slider appear on screen. To increase the volume louder on your TomTom sat nav xl, move the slider towards the right. Moving it towards the left will reduce the volume from the speaker.

If that doesn’t see to work, then a soft reset may do the trick. Sometimes what can happen is the software can become corrupted or glitchy.

1) Ensure that your sat nav is powered on.

2) Look around the sides, you will see a small reset button.

3) To reset the device back to factory settings, simply get a small pointed object and push it into the reset hole.

4) Hold it down in this position for 10 seconds and let go.

5) The sat nav will restart and you will hear the drums roll, the common start up intro. Once you hear this you know that the sound functionality has come back.

If none of the above work, then you may need to check the wires on the speaker are firmly connected or test another speaker to see if the internal one is faulty.

How To Fix Sat Nav That Keeps Falling Off Windscreen Window

2017-05-30T11:32:00.000-07:00

If you find that your tomtom sat nav wont stick to the window or dashboard, the suction cup is not sticking properly onto the surface. This can be caused by a dirty surface or what is on the surface. For example, if you have recently cleaned your windows with cleaner, this will make the suction cup fall off after a while. The best way to ensure that your sat nav holder will stick onto the windscreen without falling off is by cleaning the surface. This will ensure that both ends of the pad and the screen you are sticking it onto will provide a solid bond with each other. Since the last thing you want is your sat nav falling onto your head in the middle of the road.

1) Remove the suction cup from the window.

2) Use plain water to clean down the surface. Simply wet a micro fibre cloth and wipe it around the area were you normally stick the sat nav onto the window.

3) Once you have done, you are ready to clean the suction cup as well. Again, clean it with water.

4) Once you have cleaned the sticky side of the suction cup and windscreen, attempt to stick the sat nav holder back onto the screen. The best technique is to press down the centre of the suction up when you stick it on. This will ensure that its air tight seal between the window and the holder.

How To Make Your Own Cheap Sat Nav Holder

2017-05-30T11:22:00.001-07:00

Having a sat nav on the road makes it easier for you to find places or locations that you are not aware of. You will need to have the sat nav mounted onto your cars dashboard in order to see it properly, so that you don't lose track of your progress or your destination. The holder will come with the sat nav if you have purchased it brand new, so have a look inside the box. If you dont' have a sat nav holder and you need to go somewhere urgently, then you will need to make your own sat nav holder in the meantime. The best way to make your own cheap homemade sat nav holder is to use a pencil. We will explain how its cost effective and works perfect.

1) Get a blob of blue tak and mold one end of the pencil so that it forms the shape.

2) The end with the blue tak on place it onto the back of the sat nav. Make sure its moulded well onto it so that the pencil doesn't come off.

3) Place the pencil into the grill vent of your cars heaters. This will firmly secure the pencil pen from moving around.

4) Thats is you have made your own simple cheap homemade sat nav holder. The best thing about this is it works with all models.

We don't recommend using this method all the time, its just as an temporary alternative in the mean time until you order an brand new sat nav holder online.

How To Fix Not Working Samsung Memory Card

2017-05-29T14:49:00.000-07:00

If the memory card you have inserted into your Samsung Phone has not been detected, you will not be able to store or access existing data from it. Most of the time, if its a new memory card or one that has not been used on the device before will need formatting. This is because it might have certain config files from another device that is causing it not to be picked up. Also the files on the memory card could be corrupted causing other micro sd problems. First we will begin with a format. But before you do, try cleaning the memory card and port and reinsert it to see if gets recognised.

1) Remove the memory card from your Samsung Phone.

2) Place it into an adapter into the memory card reader on your laptop or computer.

3) Once you have slotted it in, it will pop up in my computer.

4) Right click on the memory card name and select the option called 'FORMAT'.

5) An integrated free formatting tool for all memory cards will come up in your Windows computer.

6) Select Start to begin formatting your Samsung memory card that is not working. This should take around about 30 seconds or less to complete.

7) Once the not working Samsung memory card formatting is completed, remove it from the adapter and place it back into your phone. Restart your phone before going into the memory card to refresh its settings.

How To Fix Speakers on Samsung TV Not Working / No Sound

2017-05-29T12:17:00.000-07:00

How To Fix Speakers on Samsung TV Not Working / No Sound

If you are getting no sound output from your Samsung smart TV speakers the settings usually need changing slightly. There is a setting in the sound menu that controls were the sound is directed, chances are it is probably setup to external speakers. This will then stop the sound coming out of your Samsung TV because it thinks you have got a surround sound system connected to it. Here is the quick fix for getting sound back from your Samsung smart TV.

1) Press the 'Menu' button your remote control.

2) Once you have done that select 'Sound'.

3) Select the other option called 'Speaker Settings' > 'Speaker Select'.

4) It will allow you to go through a few different options because you want your sound to come from the TV speakers built into your Samsung smart television, make sure 'TV Speaker' is selected.

Now that you have made the change to the sound setting, you should be getting sound back on your Samsung TV.

How To Fix Nokia 8800 Not Charging Solution

2017-05-29T05:23:00.000-07:00

The Nokia 8800 is a great classic mobile phone and still today is going for more than a regular iphone on ebay auctions. If you got one hold onto it and take care of it because it is a collector’s item and will only go up in value. Since its a very old mobile phone, some people are having problems with their Nokia 8800 not charging up. Here are a few things to help you troubleshoot before selling it for spares and repairs or using it for parts.

1) Try a different main plug. It’s very rare that the socket that is providing power to the phones goes out but it could, so try another mains socket. If this fixes the not charging problem, you might need to flick the switch back up on the fuse breaker.

2) Try a different Nokia charger. The plug that goes into the Nokia 8800 or the wiring inside could become loose, poor solder connections etc. Test with a similar charger to see if it makes a difference at all.

3) Clean the charging port. This is where the phone charger plugs into on the bottom of the phone. If this is clogged with dirt from your pocket, then it will cause a bad electrical connection. What you need to do is clean it with a cotton bud and try again.

4) If that doesn't work, you may need to replace the battery. The battery can become faulty; a common sign is the phone only works when plugged in. When the charger is switched off, if the phones goes off at the same time the battery needs replacing. The type of battery that is compatible with the Nokia 8800 is BL-5X. Watch out on eBay, there are many fakes about, think twice about buying batteries that are $2-3 they must be fake. Fake don't last as long and could blow up damaging your device.

5) The charging port will need replacing. Even if you have cleaned it just now, years of plugging and unplugging everyday will wear out the metal connectors inside the port. Great thing about old Nokia phones is the charging ports are easy to replace simply remove from it from the housing and place then new one in. Unlike iphones and Samsung phones where you must solder them in. Ports can be purchased on Ebay for a few dollars.

How To Clean Clogged iphone Speakers Without Opening it

2017-05-29T02:43:00.001-07:00

If you notice that your iphone is not loud as when it was purchased brand new, you may need to clean the clogged speaker grill on your iphone. The speaker grill can get clogged up with dirt and dust from your pocket during everyday use. This causes the sound to be blocked when listening to, unless this is cleaned the sound will be muffled. The best way to clean a clogged speaker grill on your iphone without actually opening up the device is to use water and a good old cotton bud used for your ear. We have seen lots of iphone users waiting in a big queues at the apple store to get there speaker port cleaning when you can do it yourself.

1) Turn the volume down your device and ensure that you are not playing something during the clean.

2) Get a cotton bud twist the fluff on one side of it so that its pointed.

3) Dab the pointed side into water, not so much that its dripping wet just a little.

4) Place the wet side of the cotton bud into the holes of the speaker grill and twirl it around a couple of times. Keep doing it until you have covered all the different sides.

5) Once you done that, use the dry side of the cotton bud to clean any water out.

6) To test if cleaning the clogged speakers on your iphone made a difference, launch the music player or go onto YouTube. Turn up the volume to the max you should hear an improvement in volume, clarity and bass.

How To Clean Charging Port on iphone

2017-05-29T02:28:00.001-07:00

If you are having problems trying to charge your iphone, the first thing to consider is to try a different cable and plug. If your iphone still has problems charging up, then the port inside the phone may need cleaning. Dirt build up from everyday use in your pocket can cause the metal contacts inside the port to become weak. Most phone shops say they are going to charge you to change the port, but what they do is clean it. Cleaning the port is easy to do, anybody can do it with the right set of instructions that i am going to provide you with.

1) Power off the iphone. This is best to do because you don't want dirt to short out inside the charging port when the phone is on. This could damage the battery and other sensitive electrical components inside the phone.

2) Now that the apple iphone is powered off, you can begin with cleaning the charging port.

3) Get a toothpick or a cotton bud and insert it into the dirty charging port on your iphone device. Under a well-lighted location, twirl around the object and push it inwards and outwards on each metal contact pin that you can see.

4) Give the charging port a quick blow with your mouth to remove dust particles that you have just broken down.

5) You have now cleaned the charging port on your iphone. This 99.9% fixes most problems on your iphone that are related to charging problems. If this doesn't work, the actual port it will self will need replacing. This can be a tricky job if you don't have the right set of tools because the solder points are small to work with, do you might want to book the phone in with a mobile phone repair shop.

How To Manually Force Mac Mini To Eject CD Disc

2017-05-28T05:47:00.000-07:00

Macs don't have a physical eject button that you can press to remove a disc on most of their drives fitted. This can cause a confusion when you want to eject the disc from your mac mini. Like Windows computers use hardware to provide this features, however the macs made by Apple have the eject button integrated into the software. Forget using confusing paper manuals, we have broken down the instructions for you to make it easier. You can thank us later. There are a few ways but the easiest is always best.

Before you try the below instructions, look in the right-hand corner of the keyboard to find an eject key for the keyboard. Usually pressing this ejects the disc from the drive. If the answer is no, try the following.

1) Find the desktop icon of the inserted disc.

2) Right click using your mouse.

3) Click 'Eject' from the drop-down list.

How To Fix Portable DVD Player Not Charging

2017-05-27T11:52:00.000-07:00

A portable DVD player purely relies on the battery pack that is connected into it. It works like how a laptop charges using a separate mains charger. If your portable DVD player screen won’t turn on, the first thing you need to check if its charging properly. If there is no charge, then there will be no light coming on the portable DVD player when plugged in. This immediately indicates that there is a problem with charging it. I have come up with a quick fix guide to make your broken portable DVD player work again.

1) If it’s a car charger, then the 12-volt cig socket in the dash could not work due to a blown fuse. Plug something into the 12-volt cig socket, either a small fan or mobile phone charger. If its getting power, then you know your charger is working and the 12-volt socket has gone bad. If you are having problems charging it at home, then try a different mains wall socket.

2) If there is powering going into to the charger but not into the portable DVD player, you can try reseat the battery pack. Press the release button to pop it out, give the connectors a quick clean and refit it back on. Sometimes it being loose slightly can cause your portable DVD player to not charge up.

3) The charger could be faulty. If you have a similar adapter with the same voltage and plug fitting plug it in. If it works then you know that the charger is not working.

4) If you have tried all the above, then the charging port could be dirty. Give it a quick clean with a cotton bud. It also could be loose. Open the portable DVD player and go over the solder points for the port. Try charging again.

If neither of the above work for fixing your portable DVD player, then the battery pack might need replacing. You can get these on EBAY.

How To Fix DVD Player Not Reading Discs Wont Play

2017-05-27T05:54:00.001-07:00

For a DVD player to read data from a disc the laser needs obtain data. Dust and dirt can cause problems for the laser getting the information. This can cause your DVD player to not read discs and won’t play. But first you need to distinguish between whether it is the laser or the disc that is dirty. Before you clean the laser lens, wipe down the surface of the disc using a soft cloth. This will remove any kind of finger prints on the disc and other dirt. Once you have cleaned the DVD, reinsert it back into the player and see if you still get loading problems. If the DVD player cannot still play discs due to not reading them, then you will need to clean the laser lens.

You can either get a laser lens cleaner disc or you can clean it yourself manually. I prefer to clean it my way because the laser cleaning disc might not always catch all the dust on the laser lens that could be causing not reading disc problems.

1) Eject the disc from the DVD player and unplug it from the mains.

2) Remove all the screws found at the bottom or the sides that holds down the top cover in place.

3) Lift the cover off from the actual DVD player.

4) The disc drive will be in the middle on most players. There will be another smaller square plastic cover that goes on top of it that holds the disc down so that it can spin. Remove the smaller screws from the disc spinner cover and lift it off.

5) Once you have done that, you should be able to see the laser lens it’s a little blue thing that looks like an eye. Get a small cotton bud dab some rubbing alcohol onto it and gently wipe away the lens a few times.

6) Once you have done that, get a vacuum cleaner and clean the space inside the disc tray to suck up any dust. Now that you have cleaned the laser and the insides of the disc tray, plug in your DVD player like normal and test to see if it can now read DVDs. If this repair hasn't worked, then the laser is most likely become faulty, most DVD players are not worth repairing so its best to bin it and buy a new one from your local department store.

How To Get More Bass From Portable Speakers

2017-05-14T04:39:00.001-07:00

Most devices are certainly limited to how much sound they can produce simply for their size. In most cases, portable speakers provide a better sound as they have bigger speakers and an external amp to back them up. If you notice that you are not getting enough bass from your portable speakers, there are a few things that you can do to get that extra boom. These tips work for all portable speakers and have worked on my good old Nokia MD6 speakers. Give them a try and let us know if they work for you.

1) Insert new batteries. If you are using old dead AA batteries that you have just taken for a remote control or have got like 50 in a pack from your local pound store, the performance of your speakers will not be that great. For portable speaker to have good bass, you need good batteries so the little internal amplifier can get the right amount of voltage. I always find that rechargeable batteries work better for portable speakers for either Duracell or Uniross.

2) Getting into the Equalizer. In most cases, what people do is simply plug in their portable speakers into their mp3 player or smartphone and call it a day. Most music players interferences have an built in equalizer that allow you to control the bass and treble. Try increase the sliders towards the left if you want more bass. Portable speakers tend to response the best around 100-200 HZ region, as they can't produce sub bass below 60HZ anyway.

3) Weak inline. All devices have their own headphone lineout amplifier inside them, some provide a strong louder signal than others. Make sure you put the volume full from the device. If you want a big boost and make your portable speakers louder, what you can do is connect a headphone amp inline with your portable speakers. So device > headphone amp > into portable speakers. Fiio make create small amps such as the Fiio E5 and E6. Its small and compact, it gives you a boost in volume and also has bass booster features on it.

So i hope these tips get you that extra bass that you are looking for this summer out of your portable speakers. If you have any other ideas please let us know and we will add them in.

How To Charge PS4 Controller Without Console?

2017-05-13T08:39:00.001-07:00

If you dont want to leave your console on or you don't have one to charge up your PS4 controller, there are alternative ways you can do it. You can charge your ps4 controller without a console, using a standard android usb cable. This cable is used for most phones such as the Samsung, HTC and Sony phones. This can also be used to charge a PlayStation 4 controller using via a mains plugs. All thanks to the clever design, which provides more options to charge your equipment. If it was apple they would probably change the connector on purpose, so you can’t charge it or if you want to buy the mains charger, it would be overpriced around $50 or something. Thats one main thing i like about Sony they always make any of their products user friendly.

1) Plug the USB end of the cable into the mains adapter plug.

2) Plug the adapter into the mains and switch it on.

3) Connect the mini usb cable end into the top of the controller.

4) If your charger and cable is working, the controller light will be orange this shows its charging.

5) You can now leave your PS4 controller to charge. It can take around 2-3 hours, but it all depends on how many amps your USB adapter is and how much charge is left on the battery already.

How To Hard Reset Nokia 8800 To Factory Settings

2017-05-13T05:08:00.001-07:00

You might find that you want to reset your Nokia 8800 phone if you are trading it in to a mobile phone shop or giving it to a new owner. This will delete everything that is on the phone, so please ensure that you make a note of important contacts and copying anything you want to keep onto a memory card. Once you have done a factory hard reset on your Nokia 8800 the data will be wiped off. Its very easy to hard reset a Nokia 8800 as follows:

1) Make sure the phone is switched on.

2) Hold the following buttons *, 3 and call button together all at the same time.

3) Press the power button.

4) Holding down these buttons for a few seconds. You should see the Nokia logo appear on the screen.

5) The Nokia 8800 might ask for a lock code to restore it to factory settings, this is 12345 as default unless it’s been changed.

6) Your Nokia 8800 will now be hard reset back to factory settings.

How To Make a Samsung Tablet Charge Faster

2017-05-07T02:12:00.000-07:00

Charging up any Android Samsung tablet will take longer to charge than a regular smartphone due to having a larger mah capacity. If you are having problems charging your Samsung tablet due to it being too slow and you want it to charger faster, there are several things that you can do to speed it up.

1) Using Old USB ports on a computer. If you are using either your computer or laptop to charge your Samsung tablet you need to plug them into the right ones. USB 3.0 ports are faster than 2.0 as they can provide more amps. The new USB 3.0 ports are coloured blue on most devices these are much faster than regular ports. If your laptop or computer is old, you might not have the newer ports, but see if you can find them on the back or front panel.

2) If you are using a mains charger, ensure that it’s not fake and can provide 2.1 amps for a fast charge. Most people don't look at the rating the charger provides, as all they assume it’s a plug with a USB port on the other side. 1A USB mains chargers are cheap for a reason and thats because they are slow. USB hubs are even better they are known to provide the best faster possible charger for your Samsung android tablet.

3) Dont use fake USB cables. Fake cables are made by cheap materials and wires hence their price. If you compared an original cable to a fake one, you will notice the small wires inside have more copper in the real one. So always make sure you use good quality cables or even better upgrade yourself to a cable made from 'Anker' that is Nylon Braided and gold plated. It will last a life time and will provide a nice boost in charging your Samsung tablet faster paired up with the right charger.