TipTopNetworking - ttN

Guide For Getting Knowledge On Real Time Networking - Part-01

noreply@blogger.com (Anonymous) — Mon, 24 Dec 2012 13:03:00 +0000

First practice to build a sample networking for home, office or big organisation....

To create sample networking infrastructure, we should need a networking simulator. In real time there have so many networking simulators in the world market. For example Packet Tracer, GNS3, Sem Sim and extra. In this Post we going to get help Packet tracer to build networking structures. Cisco organisation providing Packet Tracer application for people to play with network. Packet Tracer is free software and it is very familiar to work with this application.

Download Packet Tracer from Here for free. Download

For Windows or Linux Operating System Click Here. Download

Step 1.

How to use Packet tracer network simulator.

When you finish the downloading then proceed to formal installation procedure. After installation, application look like this..

Step 2.

To begin lets start with simple network structure for beginners. On the left bottom side you should see some kind of real time networking devices, Router, Switch, PC's and more. Do this practice, download this lab from here. Download

Step 3.

After Download lab, Click on router1 device and select CLI tab to do actions.

Step 4.

Now router in the User Mode, Type enable to change user mode to Privileged mode..

Then do Follow things to go configuration mode

Now activate Fa 0/0 cross over cable and set IP address 192.168.1.1

Now activate Fa 0/1 cross over cable and set IP address 172.16.1.1

Step 5.

Set IP address For each PC's in the structure

To set IP address for PC0, click on it and chose Desktop from the tab and click on IP configuration, on the pop up window provide IP address, Subnet Mask and Default gateway for PC0. Follow the same action for each PC's with different IP address.

Then do confirm connectivity, do the ping for each PC's from router

That's all finish first lab..

Establish Wireless Ad Hoc Network In Windows 7 To Share Internet

noreply@blogger.com (Anonymous) — Fri, 21 Dec 2012 13:11:00 +0000

Step 1.

Create an Ad Hoc Network

Ad Hoc network is a Local area network and can be set easily to transfer or sharing files and internet connection to multiple computers.

First go to start menu and type "Wireless". After that you should see a list above and from that choose "Manage wireless network".

Step 2.

Then see will see a pop up window in that select "add" button

After that task, click on option "Create an Ad Hoc network" from the pop up window.

Then you should see a window, says "Set up a wireless ad hoc network" and click "next" from that window.

Step 3.

After that you are required to provide Network name, security type and security key on next open window filed. If you willing to use this Ad Hoc network every time, check "Save this network" radio button.

After done above task wait for a while to create network.

After that you should see message that the network created success fully from the next window.

Step 4.

Thus your next task is to verify the Ad Hoc network by clicking on the wireless icon on the task bar. Then the network name will appear and alongside it a message "Waiting for users".

Step 5.

Now you go to client computer and click on wireless connection icon, from their you should see the network name. Then connect to the network by click on "Connect" option .

Finally your Ad Hoc network has been established and you are allowed to share files and folder each other. But if you want to share your internet connection, go to host's wireless adapter icon and right click on it. Then go to "Properties" > "Sharing tab" and select "Allow other network users to connect through this computer Internet Connection" check box.

Then click on "Setting" option you can select the network services the client machine can access.

That's all your task done, now you able to transfer or sharing files and internet connection to other machines.

Share a Single Set of Keyboard-Mouse For Your Computers

noreply@blogger.com (Anonymous) — Thu, 20 Dec 2012 12:20:00 +0000

Step 1.

First of all your computers must have network connection via LAN cable or other network connector. In this topic i will guide you to configure computers to connect via LAN cable and share a keyboard and mouse set.

Step 2.

Connect two separate computers using LAN cable in a network

First check whether cable plug into the both LAN ports and lights in the port should blink. If you using Windows 7 operating system, go to Control panel > Network and Internet > Network and Sharing center in boath computers and choose Change adapter setting from the left sidebar. Futher right-click on the local area connection icon and select properties. Select Internet protocol version 4 (TCP/IPV4) option from open window and click on the properties button.

Step 3.

On the pop up window choose Use the following IP address filed by selecting radio button and assign 192.168.0.1 at the IP address field in one computer and assign 192.168.0.2 to next computer, for both computers assign Subnet mask 255.255.255.0. Then click OK after complete.

Finally you done the LAN cable connection for both computers

Step 4.

Follow next important task that first computer is "Master" and the second computer called as "Slave" to share a single keyboard and mouse via a network. To do this you must need to use InputDirector software.

First Install InputDirector for both computers
Open InputDirector in the Master computer and select global Preferences from the tab. Follow the same action shows below picture and for Preferred Network Interface, click on the change button and select right entry for your LAN card from drop-down list.

Flip to the "Master configuration" tab and click on the Add button to add the Slave computer name. You can get the Slave computer name by right click on computer then select properties at the slave computer. Once you get the computer name, assign it at the Host name field, then click OK. After adding the name, it will appear in Slave System list.

Step 5.

Next, Go to slave computer and open InputDirector. Flip to the Global Preference tab and choose the "On start" option as Input Director is enabled as a slave, Change the preferred network interface in similar way that you did in your master computer.

Step 6.

To finish this task salve configuration tab and you should see the master computer name at the Master host name list. Select the radio button saying Allow any computer to take control. Once you done, you will see a system notification show "The Slave system is now available".

That's all now, you can share a single keyboard and mouse for both computers.

Access Multiple Computers Remotely By Remote Desktop Networks

noreply@blogger.com (Anonymous) — Wed, 19 Dec 2012 14:51:00 +0000

Step 1.

To complete remote desktop connection you have to Establish Wireless Home Network in Windows 7 and Vista Without Router. This tutorial support windows 7 and vista operating system.

Steps to enable Remote Desktop Connection in Windows 7 operating system.

Then click on start and select Properties in menu.

Step 2.

On the new window click on "Remote setting" option on the left.

Step 3.

Then click "Remote Assistance connection to this computer" option under "Remote" tab from the opened window. To allow people using any version of remote desktop select option "Allow connections from computer running any version of remote desktop". Then click on "Apply" to finish this task on that window.

Step 4.

Steps to connect Remote Desktop

Do the following path Start > All Programs > Accessories > Remote Desktop Connection.

Step 5.

New open window "Remote Desktop Connection" function appear. To connect on the box type IP address or computer full name of computer. check whether home computer and host computer both are connected

over network. Then click "Connect".

Step 6.

After connect it will take a few seconds to connect with host computer. Now you able to log in host computer through your computer. Provide a correct username and password to log on remote computer. After log on you can access remotely Files and Folders of host computers.

Step 7.

If you want to customize do following steps.........

Establish Wireless Home Network in Windows 7 and Vista Without Router

noreply@blogger.com (Anonymous) — Wed, 19 Dec 2012 14:09:00 +0000

Step 1.

For complete this task each computers must need a Wi-Fi device or a wireless network card to connect network.

PC wireless network card

USB wireless network card

Wireless PC- card for note book and laptop

Step 2.

First click start and select control panel, click on "Network and sharing center". Then select "set a connection or network".

Step 3.

Then select "set up a wireless and ad-hoc (computer-to-computer) "and click on it.

Step 4.

Time to giving a name for computer and make security type "WAP-2 personal". Which is a strong security method for wireless network. Provide a preferred network name and select "WAP-2 personal" security method from drop down box. After put strong security key.

Now click on "Next" then click on "Turn on Internet connection sharing".

Subnetting with the Magic Number

noreply@blogger.com (Anonymous) — Wed, 19 Dec 2012 07:35:00 +0000

Subnetting with the Magic Number

Example - 1

Example -02

Example -03

Example -04

Example -05

Question - 01

IP Address, Subnet Mask and Binary Numbers (CISCO)

noreply@blogger.com (Anonymous) — Wed, 19 Dec 2012 07:31:00 +0000

Binary Explanation

Examples of Binary Numbers

TipTopNetworking - ttN

Guide For Getting Knowledge On Real Time Networking - Part-01

Establish Wireless Ad Hoc Network In Windows 7 To Share Internet

Share a Single Set of Keyboard-Mouse For Your Computers

Access Multiple Computers Remotely By Remote Desktop Networks

Establish Wireless Home Network in Windows 7 and Vista Without Router

Subnetting with the Magic Number

IP Address, Subnet Mask and Binary Numbers (CISCO)

Binary Explanation

Decimal Explanation

IP Address and Binary Numbers

IP Address, Network Mask and Binary Numbers