frame gesign

router config

2012-01-07T01:25:00.000-08:00

Router>Router>enable

Router(config)#hostname UUM

UUM(config)#enable secret cisco

UUM(config)#line con 0

UUM(config-line)#password class

UUM(config-line)#login

UUM(config-line)#exit

UUM(config)#line vty 0 4

UUM(config-line)#password class

UUM(config-line)#login

UUM(config-line)#exit

UUM(config)#banner motd % Warning for unathurized to use this system %

UUM(config)#exit

UUM#

%SYS-5-CONFIG_I: Configured from console by console

UUM#

UUM#show run

UUM#show running-config

Building configuration...

Current configuration : 751 bytes

version 12.2

no service timestamps log datetime msec

no service timestamps debug datetime msec

no service password-encryption

hostname UUM

enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0

interface FastEthernet0/0

no ip address

duplex auto

speed auto

shutdown

interface FastEthernet1/0

no ip address

duplex auto

speed auto

shutdown

interface Serial2/0

no ip address

shutdown

interface Serial3/0

no ip address

shutdown

interface FastEthernet4/0

no ip address

shutdown

interface FastEthernet5/0

no ip address

shutdown

ip classless

banner motd ^C Warning for unathurized to use this system ^C

line con 0

password class

line vty 0 4

password class

end

UUM#config t

Enter configuration commands, one per line. End with CNTL/Z.

UUM(config)#interface fa0/0

UUM(config-if)#ip address 192.168.10.1 255.255.255.0

UUM(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

UUM(config-if)#exit

UUM(config)#interface fa1/0

UUM(config-if)#ip address 192.168.20.1 255.255.255.0

UUM(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

UUM(config-if)#exit

UUM(config)#exit

UUM#

%SYS-5-CONFIG_I: Configured from console by console

UUM#

UUM#show run

UUM#show running-config

Building configuration...

Current configuration : 779 bytes

version 12.2

no service timestamps log datetime msec

no service timestamps debug datetime msec

no service password-encryption

hostname UUM

enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0

interface FastEthernet0/0

ip address 192.168.10.1 255.255.255.0

duplex auto

speed auto

interface FastEthernet1/0

ip address 192.168.20.1 255.255.255.0

duplex auto

speed auto

interface Serial2/0

no ip address

shutdown

interface Serial3/0

no ip address

shutdown

interface FastEthernet4/0

no ip address

shutdown

interface FastEthernet5/0

no ip address

shutdown

ip classless

banner motd ^C Warning for unathurized to use this system ^C

line con 0

password class

line vty 0 4

password class

end

UUM#

Increase Internet Speed by Hack IP

2012-01-07T01:21:00.001-08:00

Hye, today I wanted to share some tips to increase your internet speed. These few days, my internet speed is quite slow, I've been downloading manga and anime and so I search for some tips to increase internet speed. Then I found it. Well, I forgot where the source and the name of it, so I just named it "Hack IP" =D

1. Right click on you desktop and select NEW SHORTCUT.
2. Type these code: c:\windows\system32\ping YOURIPADDRESS -t
3. Change YOURIPADDRESS with your IP.
    Example c:\windows\system32\ping 192.168.10.111 -t
4. Click next and finish.
5. Done! =D

Windows 7 2008 2003 Vista XP 2000 Ms Office Tutorials Fixes Tips

    * Home
    * About
    * Privacy Policy
    * Top Posts
    * Sitemap
    * Search

    * Subscribe in Bloglines
    *
    * Add to Google Reader or Homepage
    * Add to Technorati Favorites

Increase bandwidth limit in Windows 7 Home Premium

If you're new here, you may want to subscribe to Windows Reference RSS feed Thanks for visiting!

This tutorial will explain how to Increase bandwidth limit in Windows 7 Home Premium

1. Go to Start > Run… > type ‘regedit’ > OK

2. See if you find HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched

3. If you find it, set NonBestEffortLimit to the value ’0' if you want to set to 0.

The QoS Service have to be running.

You could also have a look here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Psched\Parameters\Adapters

You have to go through all your network adapters, though.

2011-11-09T20:23:00.001-08:00

Showing newest posts with label Basic Keyboard Shortcut Keys. Show older posts

Basic Keyboard Shortcut Keys For All Computer

Here are some basic Shortcut Keys
Description

Alt + F>File menu options in current program.

Alt + E> Edit options in current program

F1> Universal Help in almost every
Windows program.

Ctrl + A> Select all text.

Ctrl + X> Cut selected item.

Shift + Del> Cut selected item.

Ctrl + C> Copy selected item.

Ctrl + Ins> Copy selected item

Ctrl + V> Paste
Shift + Ins> Paste

Home> Goes to beginning of current line.

Ctrl + Home> Goes to beginning of document.

End> Goes to end of current line.

Ctrl + End> Goes to end of document.

Shift + Home> Highlights from current position
to beginning of line.

Shift + End>Highlights from current position
to end of line.

Ctrl + Left arrow> Moves one word to the left at a
time.

Ctrl + Right arrow> Moves one word to the right at a
time.
Thanks.

frame photoshop

2011-11-09T00:33:00.000-08:00

Cool Flame Effect in photoshop

First start by creating a new document

Next go to

Filter>Render> Clouds

Followed by

Filter>Render>Different Clouds

Dont be afraid to be a little more creative with your clouds, its always better to go the extra mile Now lets add some light to our fire,

Go to

Filter>Render>Lighting Effects

and in the drop down box go to

Flash Light

and click ok

Now that we have some light lets give it some color.Go to

Filter>Render>Lighting Effects

And in the drop down box select

Blue Omni

I usually just max out everything, but your main goal is to get the blue as bright as you can, again dont be afraid to be a little differnt lol =]

Now press Ctrl + I to inverse the flame and for the final product go to[

Filter>Distort>Polar Coordinates

[size=5]When the dialog box opens selct

polar to rectangle and press ok

Now look at your final product

flash

2011-11-08T23:46:00.000-08:00

I’ve been out of the Flash game for quite a while now. The last version I’ve been using was Flash MX. Imagine my surprise when I downloaded Flash CS3 and found that it now uses purely Actionscript 3.0. All my previous methods of programming Flash were rendered useless by all the new standards. Alas, I began my quest to find useful information, and hit a few roadblocks. Adobe’s livedocs are ok, but it really helps to find real world examples. I tried searching for the various things I needed, but to no avail. I finally found some screencasts on youtube that helped, so I got my problem solved. This tutorial is what I've learned, and I hope it helps you get what you need done. Now, enough of my Rant. Lets code! So my main task for this article is to load an external file into a flash app, and display it in a text box. This is specifically good for loading text that will be changed periodically. Rather than open flash, edit the file, re-publish, and upload the new file, you can just pull all the data from a txt file and display it there. We can even render the text as HTML! We’ll build this app using the TextArea component. Just go to Window->Components to pull up the components window. Drag a TextArea component to the stage, and give it an instance name. We’ll call ours external_faq. Now for the code. I’ll give the code, and then I’ll go ahead and explain it. All of the following code goes in the timeline on the same frame as the objects it references.
var faqLoader:URLLoader = new URLLoader(); // Step 1
faqLoader.load(new URLRequest(”test.txt”)); // Step 2
faqLoader.addEventListener(Event.COMPLETE, onComplete); // Step 3
function onComplete (event:Event):void // Step 4
{
var faq:String = event.target.data; // Step 5
external_faq.text += faq; // Step 6
}
~~Step 1~~ We need to make a new URLLoader, so we define the variable faqLoader as a URLLoader, then call a new URLLoader() object. The URLLoader will hold the data returned by the URL.
~~Step 2~~ We go ahead and load the url, using the URLRequest() object. We use the load method of the URLLoader object, and open a new URLRequest object, which contains the path to our text file. Simple enough.
~~Step 3~~ Now we go ahead and add an Event Listener to our faqLoader to listen for when the loading as been complete. An event listener is the equivalent of using an “onWhatever” event with older Action Script. There are many different Event Listeners and Event types. For instance you could have an event:MouseEvent and check for when MouseEvent.CLICK occurs to see when a user clicks their mouse on the object the code is attached to. That’s getting on a tangent though.
~~Step 4~~ We set a String variable to hold the text that is loaded from the file. This will enable us to do any string manipulation we may wish to do. However, we’re going to keep this one simple, and just display the text to the TextArea component.
~~Step 5~~ Finally, we set the text property of the TextArea component to our String variable. Note that we I am not using external_faq.text = faq. I am using external_faq.text += faq. Also, if you wanted to use html formatted text, you would use the htmlText property.
Finally, the text file that you have written doesn’t need any variables inside it. All it needs to contain is the text you wish to display.
I hope this tutorial is useful for anybody who had the same trouble I did. I know it’s a relatively simple application, but making that migration from Actionscript versions can be tough. Question and comments are welcome. I'm by no means a Flash expert, but I'll see what I can answer. I'm sure others will as well.

2011-11-08T23:06:00.000-08:00

cuteee sgt wei!!!!!!!!!!!!!,,sayang dia sangat2,,dia merupakan yang terakhir dan yang terbaik pernah ade..mcm nk di gigit2,,ikutkan hati ni nk saje kunci hati dia tok diri sendiri..kasih sayang dia terlalu manis megalahkan sang gula,,muke natural mengalahkan keindahan mother nature..senyumannya bagaikan petir yang menusuk hati ni tok makin sayangkan dia..cinta dia bagaikan dadah yang membuat aku ketagihkan kasih sayang dia...kasih sayangnya membuatkan diri seperti dilindungi dgn cintanye,,makin hari makin kuat perasaan syg ku padanya,,,tanpanye ku tidak keruan,,love U dear..