Trick 4 your Mobile Phone

noreply@blogger.com (mobile solution) — Mon, 12 Aug 2024 06:49:00 +0000

google.com, pub-2710165115698924, DIRECT, f08c47fec0942fa0

Xperia ST15(mini) / ST17(active) Touch screen Calibration

noreply@blogger.com (mobile solution) — Wed, 16 Jan 2013 17:27:00 +0000

How to calibrate touchscreen ST15 / ST17 with explanation.
Some Sony / SonyEricsson series ST15 (Xperia mini) or ST17 (Xperia active) possessed the problems that often come out the error touchscreen. Symptoms of various kinds of error, for example: back button / menu button itself is continuously pressed, the phone will vibrate automatically continue, touchscreen difficult to use even barely used, heat up the phone and battery drain.

Now you can fix this problem.

Download all the necessary files:

1. dotNetFx40_Full_x86_x64
2. SEMC Calibration driver
3. Touch panel calibration 1.0.0.3
4. Instalation guide for SEMC calibration driver.pdf
You need SETool box to flash the phone.

Before performing calibration make sure the battery is fully charged and the existing data on your phone will be lost because we can not do the backup could not be used due to the touchscreen.

Steps to perform the calibration as follows:
1. Extract all files, install the file number 1 that have been downloaded
2. Flash phone (ST15 / ST17) with ETS software with Setool
3. Unplug the cable from the phone, remove and reinsert the battery
4. Press the power button until the phone vibrates, the phone display will be blank, wait 10 seconds
5. Run software "Touch panel calibrtation 1.0.0.3.exe
6. Connect the phone to the USB port with the installed driver (follow file number 4)
7. Click start calibration, if pass flash the phone with SeTool or flashtool with good firmware.

Do not touch the touch screen during the calibration process, After flashing is complete, turn on the phone, to make sure the phone is normal, do a self-test by pressing * # * # 7378423 # * # *
Good Luck.

HTC Desire Android SIM-Unlock | how to? |

noreply@blogger.com (mobile solution) — Wed, 06 Apr 2011 15:59:00 +0000

Easy ways to do the SIM-Unlock on HTC Desire (Android) there are 2 methods that I know, namely:
1. Boot from CD
2. Boot from USB (PenDrive / FlashDisk) course for the laptop supports booting from USB.

For the first method, the following steps:
1. Download the ISO file below, and burn to CD (this is freeware)
HTC-Desire-unlock_v0.2a.iso

2. Boot the computer with the CD
3. Power up your phone into HBOOT by pressing both Vol-Down and Power buttons
4. Connect the device to the computer and then press ENTER
5. follow the instructions

For the second method, the following steps:
1. Download Multiboot ISO, HERE
2. FlashDisk Plug into your computer, then format
3. Run Multiboot ISO, and adjust the flash drive as the drive in your computer
4. follow the instructions as shown below marked with red boxes mark, then click "create"

5. after appearing as shown below, click "next"

6. last click "no"

After that please boot your computer from USB, and Ulock ready made.

Note: The app does not require root or s-off and Should work on any hboot and radio version. (It has been tested so far with HBOOT up to 0.93.1000 and up-to-RADIO 5.14.05.17).
It's based on Some vulnerabilities and undocumented features, so disclosing Them Would mean the Greater the chance of Them being corrected.
I've only tested it on Desire GSM and I do not recommend using it on CDMA devices; doing Otherwise Could lead to unpredictable results.

credited to: forum.xda-developers.com

How to Root your Android Phone safely and easily

noreply@blogger.com (mobile solution) — Wed, 05 Jan 2011 11:30:00 +0000

      Is Rooting on Android Phone make the warranty void? Yes....because Rooting on an Android Phone is the process of modifying the Operating System on your device to grant you complete control over it.
      But you do not need to worry because with the UniversalAndRoot App, rooting becomes a simple task that any person can do. Which makes the warranty void is to unlock the bootloader, because some tutorials suggest to do it as a rooting procedure.
      With UniversalAndRoot App you do not need to unlock it, and the best thing is, You can even Unroot your phone and get it back to the original state. So it's safe and easy.
      Why do I need to Root my Android Phone, what are the benefits?
Root doesn't unlock your phone for other carriers. It gives you super user access aka SU. It will allow you to flash custom ROMs and themes. Some apps require root to work properly. And also you will get :
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
    ^ Themes
    ^ Core apps (maps, calendar, clock etc)
    ^ Recovery image
    ^ Bootloader
    ^ Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
    ^ Boot images
    ^ Add linux binaries
3. Run special apps that need more control over the system
    ^ SuperUser (lets you approve or deny the use of root access to any program)
    ^ Task Manager For Root (Lets you kill apps that you otherwise could not kill)
    ^ Tether apps (like the one found at android-wifi-tether.googlecode.com)
    ^ And many more
4. Backup your system
    ^ You can make a folder on your sdcard and backup all of your (.apk) files to your sdcard (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su reboot )

This application can only work on mobile phones below (for now):

* Google Nexus One (running 2.2)
* HTC Hero (2.1)
* HTC Magic (1.5)
* Dell Streak (2.1)
* Motorola Milestone (2.1)
* Motorola XT701
* Motorola XT800 (2.1)
* Motorola ME511
* Sony Ericsson X10 (1.6)
* Sony Ericsson X10 Mini Pro (1.6)
* Acer Liquid (2.1)
* Vibo A688 (1.6)
* LG1 1.6
* Mytouch 3G Slide
* LG Ally
* HTC Tattoo
* More to come

Download the latest version of UniversalAndRoot App, and install it on your device. Make sure your phone is supported by the application or it will brick your phone, and then follow steps below :
1. Open application
2. In the dropdown menu, select your current Android version.
3. Tap on the Root button. Wait for about 5 seconds until all status are (OK).
4. Your phone is now rooted.
To Unroot select "UnRoot" button.

Touch Screen Calibration on SonyEricsson

noreply@blogger.com (mobile solution) — Sat, 18 Dec 2010 10:10:00 +0000

On SonyEricsson phones that use touch screen (like P1, M600, W960, etc.), it is difficult for some users find the menu to calibrate, even though these have been provided. Calibration is the level of service light on a touch screen phone before doing repair software or hardware.

To perform the calibration on the touch screen sonyericsson follow these steps:

Use the scroll button on the side to select the menu

1. go to menu
2. select tools / settings
3. select control panel
4. select other
5. select the setup wizard, and press next until the display calibration appears,
do the calibration using the stylus by touching on the blinking point (there are 4 points)
6. press next until save options appear, and then save.

If you've done the steps above but the touch screen problem has not been completed, repair software or hardware may make sense for your phone to be normal again.

How to install Nokia Ovi Map for Free

noreply@blogger.com (mobile solution) — Sun, 12 Dec 2010 11:13:00 +0000

The maps are very important to help us in a trip or looking for a place that we seek. With the Nokia Ovi Map we will be very helpful for it all.

Here's how to install Ovi Map on your Nokia mobile phone :

Connect your mobile to your computer with USB or Bluetooth in PC Suite mode. You need to have Nokia Ovi Suite installed on your computer.
Download Maps to your desktop or an easily accessible folder on your computer.
Install Maps using Nokia Ovi Suite e.g. double click on the Maps installer file. Finish the installation on your mobile.
Maps starts automatically after it has been installed on your mobile.

Nokia Ovi Maps Compatible device :
X6 16GB | X6 32GB | N8 | N97 (mini, mini gold edition) | N86 8MP | E72 | E71 | E66 | E5 | E55 | E52 | C6 | C5 | 6760s | 6730c | 6720c | 6710navigator | 6700c | 5800xm | 5800navigation edition | 5235ovi music unlimited | 5230 | 2710navigation edition.

Ovi Map is always best and their features as well from Nokia Ovi....these are real helpful,

Features :

My position
Share location
Search and find places
Favourites
Drive
Walk
Own Voice for Ovi Maps
Free maps and map update
Map views
Online and offline modes
Lonely Planet guides

Learn more about these features.

Nokia Ovi Store install after Hard Reset

noreply@blogger.com (mobile solution) — Fri, 26 Nov 2010 13:56:00 +0000

Ovi means door (in finland) is the brand of Nokia Internet services that focus on five areas of service which include games, maps, media, messaging, and music. In a previous post (How to safely Hard Reset Nokia N8) has explained that performing a hard reset on nokia phone embedded operating system symbian ^ 3, will remove the "ovi store" applications.
And this time we will discuss how to install the application (ovi store) after performing a hard reset:
Uninstall all the (ovi apps) or (ovi store) installer from your phone, and make sure only (Ovi) is left in the application folder (Settings>Application manager>Installed apps).
1. Download the latest installer Qt v4.7 for symbian ^ 3
2. install "qt.sis" and "qtwebkit.sis" from package v4.6 into the phone memory
3. click "store icons" on the main menu, this will take you to download "ovi store app" (you have to install it)
4. restart the phone after the installation
5. install "qtwebkit_2_1.sis" and "qt_4_7_0_opengl.sis" from package v4.7 into the phone memory
6. installation is complete.

Now the problem has been resolved with this trick. Good Luck.

How to safely Hard Reset Nokia N8

noreply@blogger.com (mobile solution) — Fri, 26 Nov 2010 04:31:00 +0000

      Nokia keep on innovating new products to reach the world mobile phone market, it is evident with the launch of the latest mobile phone called the N8, where this latest smartphone using the latest operating system that is also symbian ^ 3.
      Before the smartphone was launched, many reviews about the features on the blog and website, so this time I will not discuss it again but will give little trick about how to do a hard reset on the phone (Nokia N8) and what it must be noted as well as the possibility that must have occurred after a reset / format.

Here is the method to full format / hard reset :

1) Make sure that the battery is fully charged
2) Turn off your phone
3) Hold "Volume Down + Camera Key + Menu Key" and press power button until your phone shake and than release the keys
4) Wait until screen show properly...and welcome back!

      Noteworthy is Do Not do a full format if not Necessary, only do it as your last choice, since all personal data stored will be lost (recommended for backing up), even congenital mobile applications mentioned below will also be missing :
1. OVI Maps. However, you could reinstall it by download it from the vendor here (we need to sign in / register using nokia account).
2. Ovi Store 2.0 We can't reinstall it since it always show "Unable to install".

      It's because full format destroyed Qt Runtime so we couldn't install Qt-based Ovi Store 2.0. we need to reflash it at Nokia Shop or manually try to install "ovi store app" here and everything will works perfectly.
      So, think again before doing so, the most important thing is we already know the risks before doing. Good Luck.

5 Problems and solutions Blackberry Software Most Frequently found

noreply@blogger.com (mobile solution) — Mon, 22 Nov 2010 08:24:00 +0000

1. Emails have been deleted but are still stored.
    This is because in fact the deleted emails are still stored in the "deleted items folder" which sometimes causes a database error or out of sync. A simple solution is to permanently delete emails from outlook inbox by pressing the "Shift" and "Delete" keys simultaneously, or can be manually by deleting all the emails are still stored in the "deleted items folder".

2. Emails can not be entered and saved into the inbox folder.
    Because the inbox memory is full, then no new emails can be stored in the inbox. how to fix this error is to re-register by going to (main menu, advance option, navigate to the host rotating table, select the menu, register now, and registration message sent)

3. Can not send email
    This error is usually caused by a network service problem (GPRS/3G) or did not find GPRS/3G signal. simple things you can do to fix this error is to perform a soft reset and hard reset on the BB handheld.
Soft reset : in standby press (ALT + CAP + DELETE) simultaneously.
Hard reset : press the reset button located on the back of the handheld.

4. Auto power off when going to answer the call
    This software error caused the BlackBerry rare memory refresh, remove the battery for 5-10 minutes, in order to refresh the memory and make it a habit to do once a week.

5. Often blank lcd screen
    On mobile devices that already use the Operating System, this is often the case, is no exception to the BB.do the handling of the most lightweight and low-risk first
a. perform a soft reset and unplug the external memory
b. upgrade or downgrade software / operating system
c. if steps a and b are not successful, the possibility of damage to hardware or lcd.

Cross Battery problem on BlackBerry 83xx

noreply@blogger.com (mobile solution) — Sat, 20 Nov 2010 09:35:00 +0000

        On the BlackBerry handheld 83xx series or the other, often have problems such as cross-battery logo when plugging the usb cable to the device. whether this software or hardware problem?
        This software can also be hardware problem, check the damage with the following steps :
1. if the handheld is still detected in Desktop Manager may still be solved with software flashing or by reprogramming the operating system. cause is cod files on the system load is missing or corrupt.
2. but if not detected in the DM or other tools, this means the damage is certainly a hardware problem, the battery circuit conductor paths are not normal.
steps of checking the hardware :
1. check battery, can be a simple way to switch a normal handheld battery.
2. either clean the battery connector on pcb or on battery
3. check "crystal 91HCE2" (resolder / change)
4. inductor component checks all around power-ic
5. check the "regulator 907 ps 12" (resolder / change)
for step 3,4,5 please look at the scheme.
        If the above steps have been conducted, but cross-battery problem persists, then it entered the advanced damage, which I will discuss in the next post.

Make Blackberry Browser Faster

noreply@blogger.com (mobile solution) — Tue, 16 Nov 2010 07:22:00 +0000

        Speed up blackberry browser tricks only maximize the performance while minimizing the appearance or browser features. a major impact on browsing speed is a provider of cellular service network.
        But with these tips we can accelerate browsing on hendheld than to use your full featured. Sett BlackBerry's browser as below :

1. Open Browser
2. Click "BB" logo
3. Click Browser Configuration
4. Check on the "Prompt to enable javascript" and "Use foreground and background"
5. Unchecked the others option
6. Exit and save

        With a setting like this, the display will be old fashioned but the browsing speed will be better.
        Also make sure you use "Internet Browser" as the default gateway route in the "Browser Configuration" and "General Properties" in the BB browser options menu. This means that browser will be redirected to the RIM network via the operator.
Clean browser cache memory as often as possible to increase the speed with the following steps :

1. Open browser
2. Click "BB" logo
3. Click options
4. Click Cache Operations
5. Click Clear to all options such as, content cache, Pushed content, cookie cache.
6. Exit and the BB will do the "cleaning memory".

Easy step BlackBerry GPS Setup

noreply@blogger.com (mobile solution) — Tue, 16 Nov 2010 05:49:00 +0000

Some BlackBerry models are like Curve, Bold, Javelin or Storm, etc. .. been equipped with a built GPS, which can be used for navigation activities, determine the position, geotagging photos, etc.
To access the GPS we can use BB maps or google maps on hendheld, then our position will appear on the map and of course we must have a package of BIS (Blackberry Internet Service) enabled.

The following is a brief tutorial how GPS Settings on Blackberry :

1. Access the Options menu, Advanced Options and select the GPS. ( it takes you to the GPS menu)
2. Access Options, GPS Services, and click the trackball / Ok and then select the Location ON.
3. Run BB maps or Google maps, if no constraints, would your position will appear on the map.

HTML Email Setup on BlackBerry

noreply@blogger.com (mobile solution) — Wed, 10 Nov 2010 03:29:00 +0000

         There are several steps you should do to Setup HTML email on the BlackBerry, including conditions that must exist in the blackberry handheld. In this post I will describe the requirements and also the steps to activate the Blackberry HTML email.

        Requirements that must be met to follow the activation steps :
1. BlackBerry OS version must be at least 4.5.0 and above, if you still use OS under 4.5.0 please update first.
2. BIS providers must have been activated.
3. activate / re-register your email on BIS providers, either through the handheld via BIS provider icon's or via internet computer, if successful your BIS providers will respond via SMS to your handheld.

        If the requirements are available on the handheld, go to step activation :
1. Reset your handheld by removing the battery, then press and hold power_on button 2-5 seconds, and insert the battery again, .. wait until handheld power up with normal again.
2. Open the messages folder
3. Click on a reply message from BIS providers
4. Click Options
5. Click Email Settings
6. Enable HTML email = yes
7. Download Images Automatically = yes
8. Setting the TCP / APN to the mode "enable"
9. reset the handheld (such as the first step)

        If HTML logo's has not appeared, It's caused the TCP / APN is not active yet, just wait it will be active automatically.

Unable to connect to the BlackBerry smartphone during a multistage loading operation

noreply@blogger.com (mobile solution) — Tue, 09 Nov 2010 12:47:00 +0000

        If you have problem like title below when you flashing / repgraming BlackBerry handheld use Desktp Manager or other flashing tools, it's usually caused connection between the BlackBerry USB port and USB port computer is always broken (always fails) when the automatic reconnect progress and prompt to unable to complete the flashing process to 100%.
There are some solution you can do to solve that problem :
1. Turn off the Power Management options for your computer's USB root hub.
How to disable Power Management for USB root hub on the computer, perform the following steps:
    • Open the Control Panel (click Start> Settings> Control Panel)
    • In Control Panel, click System.
    • Select the Hardware tab and click Device Manager.
    • In the Device Manager -> Universal Serial Bus controllers.
      a. Right click USB Root Hub and select Properties.
      b. select Power Management tab and check mark "turn off this device to save power"
    • Repeat step a. b. for other entries named USB Root Hub. (Turn off everything), leave one port to be used for flashing.
2. Make sure the BlackBerry is connected directly to computer USB (USB on the motherboard) and not on a USB hub.
3. Disconnect all other USB devices such as flasher box, modem, removable disk, cardreader .. etc.
4. Turn off antivirus or firewall programs running on your computer.
5. Try to use the short usb cable during flashing process, aimed at delivered maximum voltage.

note: turn off / disable the other USB root power management point to stabilize the voltage on the USB cable in use in the flashing process. so do not be turned off all, reserving one USB root that will used.

Hard Reset, Secret Code Nokia E52

noreply@blogger.com (mobile solution) — Fri, 22 Oct 2010 03:25:00 +0000

Performing a Hard Reset on Nokia E52 will be erase all user data and also the settings will be return to the factory settings. It's highly recomended to backup all important data first and make sure that the battre power is full due prevent from the further damage.
It's usually doing if the phone have software problem, hard reset is the first step prior to the next step is to reflash.

To perform it on Nokia E52 simply by following the steps below :

1. Turn the phone off
2. Press and hold CALL + * + 3 + POWER buttons until Nokia boot up screen is appear
3. release the POWER button if the phone feels like power up, but still holding all three buttons (CALL + * + 3) until process complited.

Restore Factory settings Code ( *#7780# )

Reformat Code ( *#7370# )

Hard Reset X10 Mini Sony Ericsson

noreply@blogger.com (mobile solution) — Fri, 22 Oct 2010 02:56:00 +0000

        Xperia X10 Mini is one of several Android Phones from Sony Ericsson brand. To perform a Hard Reset on this device is just a simple steps.
        You better to back up all important data first, cause it will be erased and also the settings will be return to the factory settings. Don't forget to make sure that the battre power is full.
        The hard reset usualy doing if we have software problem on that device, to perform it follow the steps below :

1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.

Hard Reset Nexus One Android Phones

noreply@blogger.com (mobile solution) — Thu, 21 Oct 2010 10:21:00 +0000

To perform a Hard Reset On droid "Nexus One" , you must backup all important data that stored in the device first, cause it will be erased and also the settings will be return to the factory settings.
Don't forget to make sure that the battre power is full. If you sure all ok to perform hard reset, follow the instructions below :

1. Turn the phone off.
2. Hold the Volume Down button and press and release the Power button.
3. Phone will boot into menu with pictures skateboard guys.
4. Select Clear Storage from the list by pressing the Volume Down button.
5. Press the Power button, and confirm by pressing Volume Up.
6. Phone will be reboot and finish.

Hard Reset LG GW-620 (EVE) Android Phones

noreply@blogger.com (mobile solution) — Thu, 21 Oct 2010 10:01:00 +0000

Android Phones LG GW-620 is also called "EVE" have some combination keys to perform a Hard Reset on this device. Like the others phones hard reset will be erasing all user data that stored in the device and also returning the settings to the factory settings.
So it's highly recomended to backup the important data and make sure the battre power is full to prevent the further damage.
To perform hard reset, just press "3845#*620#" with dial pad. On screen will appear option menu after press that combination keys, select factory reset to perform it and follow the instruction.

Hard Reset TMobile MyTouch (SAPP300)

noreply@blogger.com (mobile solution) — Thu, 21 Oct 2010 09:12:00 +0000

        TMobile MyTouch (SAPP300) is an Android Phones with full touch screen, no hard qwerty keyboard available. You may perform a Hard Reset if you have a software error on that device.
        Performing hard reset will be erase all user data and also returning the settings to the factory settings.
        It's highly recomended to back up the important data first, and make sure the battre power is full.

To perform a hard reset follow the steps below :

1. Turn the phone off.
2. Press and hold HOME and POWER buttons (keep holding both of buttons for at least 25 seconds even if the startup screen appears).
3. Release both of buttons when the black screen with a warning sign appears
4. At the condition warning sign screen, press the HOME and POWER buttons again simultaneously aproximately 10 seconds and then let the process running.
5. Use the trackball to scroll to "wipe data/factory reset" then press the trackball.
6. Wait until "Data Wipe Completed" text displayed then scrol the trackball to "reboot System Now" and press it.
        Device will be reboot and hard reset is completed.

Hard Reset Motorola Dext Android Phones

noreply@blogger.com (mobile solution) — Thu, 21 Oct 2010 08:14:00 +0000

Motorola Dext is an Android Phones from Motorola brand. If you have some software problem on that device you can perform a Hard Reset. It's only a software error not a hardware error.
All user data will be erased and all settings will return to the factory settings, it's highly recomended to back up all important data first, and also make sure the battre power is full.

To perform a hard reset follow the step below :

1. Holding the Camera button while turning on your phone,
2. When prompted hit the Volume-Down rocker button to go into Recovery Mode.
3. After you get into Recovery Mode,
4. Press ALT+L to reset, then Menu+Back to reboot.

Hard Reset Motorola CLIQ XT (MB501) Android Phones

noreply@blogger.com (mobile solution) — Thu, 21 Oct 2010 07:57:00 +0000

Performing a Hard Reset on CLIQ XT , all user data that stored in the device will be erased and will be lose.
It's highly recomended to back up all important data first, and also make sure the batrre power is full.

To performing hard reset follow the steps below :

1. Turn the phone off.
2. Press and hold the Power and Camera buttons
3. Release the Camera button when prompted
4. Press and hold the Volume Down key
5. A yellow exclamation will appear on the display. Wait until a menu with options will appear.
6. Using the touch screen select Factory Reset and press OK

Hard Reset Motorola Milestone

noreply@blogger.com (mobile solution) — Wed, 20 Oct 2010 10:21:00 +0000

Motorola Android Phones like picture beside is also called "MILESTONE", if you have software problem on that device you can performing Hard Reset or soft reset by your self.
All user data will be lose and also it will be return to factory settings. It's highly recomended to back up all important data first.

To performing a soft reset on Motrola Droid : touch Menu > Settings > Privacy > Factory data reset > Reset phone.

To performing a hard reset on Motorola Droid follow the steps below :
1. Turn the phone off (make sure the battre power is full).
2. Press and hold CAMERA + POWER buttons aproximately 12 seconds, you will see Motorola logo and a yellow exclamation point in a white triangle.
3. When you see exclamation point, press VOLUME UP then CAMERA buttons You will see Android system recovery menu.
4. Select Wipe / Factory Reset with volume down button or with "Dpad" then press power button or center "Dpad" to hard reset

Hard Reset HTC Tattoo Android Phones

noreply@blogger.com (mobile solution) — Wed, 20 Oct 2010 09:47:00 +0000

To Hard Reset the HTC Tattoo is almost the same as the other HTC Android Phones. All user data in the device will be lose, and also all settings will be return to factory settings. So back up all important data first before performing it.
Performing a hard reset on all device, you must make sure that the battre power is full, and turn the phone off first, than follow the steps below :

1. With the phone turned off, press and hold the HOME and BACK then briefly press the END CALL/POWER button.
2. Press the ENTER button to begin the reset process.

Tips : If your phone hangs or freezes, remove the battery then wait for 20 seconds, and then re-install it. After re-installing the battery, turn on the phone.

Hard Reset HTC Magic Android Phones

noreply@blogger.com (mobile solution) — Wed, 20 Oct 2010 08:34:00 +0000

        HTC Magic is one of several Android Phones from HTC brand. If you have a software error you can performing a Hard Reset first before you take a step to reflashing it.
        With performing a hard reset will deletes all user data, including downloaded applications, and resets the device back to its initial state, the state before you turned on the device for the first time.
        It's important to Make sure to back up important data you have on the device before you perform a factory data reset, and also make sure that the battre power is full.

Turn the phone off first, and follow the steps below :

1. With the phone turned off, press and hold the HOME and BACK buttons
2. Briefly press the END CALL/POWER button while continuing to press HOME and BACK buttons.
3. When you see the screen with the 3 Android images, release the HOME and BACK buttons, and then press the TRACKBALL.

Tips : If your phone hangs or freezes, remove the battery then wait for 20 seconds, and then re-install it. After re-installing the battery, turn on the phone.

Hard Reset HTC Hero Android Phones

noreply@blogger.com (mobile solution) — Tue, 19 Oct 2010 11:41:00 +0000

To perform a Hard Reset on HTC Hero that have Android operating systems is relatvely easy, you can perform it if the phone in software error not hardware.
If the hard reset can't fix your phone it's means that you need to flash it or may be hardware trouble. Follow the instructions below if you want to do it :

1. Turn the phone off, press and hold the HOME and BACK buttons then briefly press the END CALL/POWER button. The reset process will start after a few seconds.
2. Wait for the phone to finish the reset process and then press MENU.

Tips : If your phone hangs or freezes, remove the battery then wait for 20 seconds, and then re-install it. After re-installing the battery, turn on the phone.