Tricks Tutor

Using Windows 10's Dynamic Lock to protect your PC while you move away

noreply@blogger.com (TricksTutor) — Sun, 28 Jan 2018 02:35:00 +0000

What is a Dynamic Lock?
The Dynamic Lock feature uses the proximity of a Bluetooth-paired phone to Lock and Unlock Windows 10.

How does it work?
Dynamic Lock lets you control access to your PC based on how close your Bluetooth-paired phone is to the PC.It measures the strength of the radio signal between your PC and the paired phone at a regular interval. It means that if the Bluetooth-paired phone is not found within radio range of your PC then Windows 10 will turn off the screen and locks the PC after 30 seconds.This new OS feature is known to some as “Windows Goodbye,” and some OEMs refer to this feature as “proximity lock.”

Setting Up Dynamic Lock:
To setup dynamic lock

1. You must first pair your phone over the Bluetooth with your Windows 10 based PC.
(Check this detailed guide on How to Pair Mobile with Windows 10 PC over Bluetooth)

2. Once pairing is complete, you can turn on Dynamic Lock by goining to
Settings > Accounts > Sign-in options
Scroll down to Dynamic Lock option and click the checkbox which says
“Allow Windows to detect when you’re away and automatically lock the device,”
as shown in pic below:

How to Pair Mobile with Windows 10 PC over Bluetooth

noreply@blogger.com (TricksTutor) — Sun, 28 Jan 2018 02:27:00 +0000

Every now and then we need to transfer data between our mobile and computer. We have different options to do so. The most convenient option to transfer small amount of data is using bluetooth. Bluetooth pairing is also needed to use the latest feature of windows 10 that is Dynamic Lock. Which measures the bluetooth radio signal strength to know your proximity to the computer and locks it if you move a handsome distance away from your computer.

This step by step graphical guide will show you how to connect/pair your mobile phone with PC having windows 10.

Step 1: Click on Start Menu and then open settings

Step 2: In the next window click on Devices

Step 3: In the next window first turn on the Bluetooth and then click on the + Add Bluetooth or Other Device

Step 4: Click on Bluetooth

Step 5: Once the device is detected then click on connect in windows as well as on your mobile after confirming the PIN

Step 6: Click Done once the device is connected

Step 7: Now your device should show up under Other Devices

Congratulations ! you have successfully paired your mobile with your PC :)

Make Money with your Facebook Page

noreply@blogger.com (Anonymous) — Sat, 24 Aug 2013 12:02:00 +0000

Make Money

You can earn cash with your Facebook page!

Making money by liking pages

As the first provider in the world FanSlave allows you to make money with your Facebook page. After the successful registration, you can click through the pages of the FanSlave network. If you like the page, you get FanSlave credits for your efforts, which you can cash out after reaching the minimum payout of € 15.

How can I make more money?

Earn money by recommending the page (Affiliate Program)

With fanSlave you can easily make more money by recommending our site.
When a new user logs in with your referral link, you get 15% on all earnings of the new user.
This includes both - the clicking money and all sales. Furthermore, you also get commission for the users recommended by your referred user - and all for a lifetime!

Windows 7 Amazing Keyboard Shortcuts

noreply@blogger.com (Anonymous) — Fri, 24 Aug 2012 23:50:00 +0000

Keyboard shortcuts

Keyboard shortcuts are combinations of two or more keys that, when pressed, can be used to perform a task that would typically require a mouse or other pointing device. Keyboard shortcuts can make it easier to interact with your computer, saving you time and effort as you work with Windows and other programs.

Most programs also provide accelerator keys that can make it easier to work with menus and other commands. Check the menus of programs for accelerator keys. If a letter is underlined in a menu, that usually means that pressing the Alt key in combination with the underlined key will have the same effect as clicking that menu item.

Pressing the Alt key in some programs, such as Paint and WordPad, shows commands that are labeled with additional keys that you can press to use them.

You can also create new keyboard shortcuts to open programs. For more information, see Create keyboard shortcuts to open programs.

Show all

Ease of Access keyboard shortcuts

The following table contains keyboard shortcuts that can help make your computer easier to use.

Press this key	To do this
Right Shift for eight seconds	Turn Filter Keys on and off
Left Alt+Left Shift+PrtScn (or PrtScn)	Turn High Contrast on or off
Left Alt+Left Shift+Num Lock	Turn Mouse Keys on or off
Shift five times	Turn Sticky Keys on or off
Num Lock for five seconds	Turn Toggle Keys on or off
Windows logo key +U	Open the Ease of Access Center

General keyboard shortcuts

The following table contains general keyboard shortcuts.

Press this key	To do this
F1	Display Help
Ctrl+C (or Ctrl+Insert)	Copy the selected item
Ctrl+X	Cut the selected item
Ctrl+V (or Shift+Insert)	Paste the selected item
Ctrl+Z	Undo an action
Ctrl+Y	Redo an action
Delete (or Ctrl+D)	Delete the selected item and move it to the Recycle Bin
Shift+Delete	Delete the selected item without moving it to the Recycle Bin first
F2	Rename the selected item
Ctrl+Right Arrow	Move the cursor to the beginning of the next word
Ctrl+Left Arrow	Move the cursor to the beginning of the previous word
Ctrl+Down Arrow	Move the cursor to the beginning of the next paragraph
Ctrl+Up Arrow	Move the cursor to the beginning of the previous paragraph
Ctrl+Shift with an arrow key	Select a block of text
Shift with any arrow key	Select more than one item in a window or on the desktop, or select text within a document
Ctrl with any arrow key+Spacebar	Select multiple individual items in a window or on the desktop
Ctrl+A	Select all items in a document or window
F3	Search for a file or folder
Alt+Enter	Display properties for the selected item
Alt+F4	Close the active item, or exit the active program
Alt+Spacebar	Open the shortcut menu for the active window
Ctrl+F4	Close the active document (in programs that allow you to have multiple documents open simultaneously)
Alt+Tab	Switch between open items
Ctrl+Alt+Tab	Use the arrow keys to switch between open items
Ctrl+Mouse scroll wheel	Change the size of icons on the desktop
Windows logo key +Tab	Cycle through programs on the taskbar by using Aero Flip 3-D
Ctrl+Windows logo key +Tab	Use the arrow keys to cycle through programs on the taskbar by using Aero Flip 3-D
Alt+Esc	Cycle through items in the order in which they were opened
F6	Cycle through screen elements in a window or on the desktop
F4	Display the address bar list in Windows Explorer
Shift+F10	Display the shortcut menu for the selected item
Ctrl+Esc	Open the Start menu
Alt+underlined letter	Display the corresponding menu
Alt+underlined letter	Perform the menu command (or other underlined command)
F10	Activate the menu bar in the active program
Right Arrow	Open the next menu to the right, or open a submenu
Left Arrow	Open the next menu to the left, or close a submenu
F5 (or Ctrl+R)	Refresh the active window
Alt+Up Arrow	View the folder one level up in Windows Explorer
Esc	Cancel the current task
Ctrl+Shift+Esc	Open Task Manager
Shift when you insert a CD	Prevent the CD from automatically playing
Left Alt+Shift	Switch the input language when multiple input languages are enabled
Ctrl+Shift	Switch the keyboard layout when multiple keyboard layouts are enabled
Right or Left Ctrl+Shift	Change the reading direction of text in right-to-left reading languages

Dialog box keyboard shortcuts

The following table contains keyboard shortcuts for use in dialog boxes.

Press this key	To do this
Ctrl+Tab	Move forward through tabs
Ctrl+Shift+Tab	Move back through tabs
Tab	Move forward through options
Shift+Tab	Move back through options
Alt+underlined letter	Perform the command (or select the option) that goes with that letter
Enter	Replaces clicking the mouse for many selected commands
Spacebar	Select or clear the check box if the active option is a check box
Arrow keys	Select a button if the active option is a group of option buttons
F1	Display Help
F4	Display the items in the active list
Backspace	Open a folder one level up if a folder is selected in the Save As or Open dialog box

Windows logo key keyboard shortcuts

The following table contains keyboard shortcuts that use the Windows logo key .

Press this key	To do this
Windows logo key	Open or close the Start menu.
Windows logo key +Pause	Display the System Properties dialog box.
Windows logo key +D	Display the desktop.
Windows logo key +M	Minimize all windows.
Windows logo key +Shift+M	Restore minimized windows to the desktop.
Windows logo key +E	Open Computer.
Windows logo key +F	Search for a file or folder.
Ctrl+Windows logo key +F	Search for computers (if you're on a network).
Windows logo key +L	Lock your computer or switch users.
Windows logo key +R	Open the Run dialog box.
Windows logo key +T	Cycle through programs on the taskbar.
Windows logo key +number	Start the program pinned to the taskbar in the position indicated by the number. If the program is already running, switch to that program.
Shift+Windows logo key +number	Start a new instance of the program pinned to the taskbar in the position indicated by the number.
Ctrl+Windows logo key +number	Switch to the last active window of the program pinned to the taskbar in the position indicated by the number.
Alt+Windows logo key +number	Open the Jump List for the program pinned to the taskbar in the position indicated by the number.
Windows logo key +Tab	Cycle through programs on the taskbar by using Aero Flip 3-D.
Ctrl+Windows logo key +Tab	Use the arrow keys to cycle through programs on the taskbar by using Aero Flip 3-D.
Ctrl+Windows logo key +B	Switch to the program that displayed a message in the notification area.
Windows logo key +Spacebar	Preview the desktop.
Windows logo key +Up Arrow	Maximize the window.
Windows logo key +Left Arrow	Maximize the window to the left side of the screen.
Windows logo key +Right Arrow	Maximize the window to the right side of the screen.
Windows logo key +Down Arrow	Minimize the window.
Windows logo key +Home	Minimize all but the active window.
Windows logo key +Shift+Up Arrow	Stretch the window to the top and bottom of the screen.
Windows logo key +Shift+Left Arrow or Right Arrow	Move a window from one monitor to another.
Windows logo key +P	Choose a presentation display mode.
Windows logo key +G	Cycle through gadgets.
Windows logo key +U	Open Ease of Access Center.
Windows logo key +X	Open Windows Mobility Center.

Windows Explorer keyboard shortcuts

The following table contains keyboard shortcuts for working with Windows Explorer windows or folders.

Press this key	To do this
Ctrl+N	Open a new window
Ctrl+W	Close the current window
Ctrl+Shift+N	Create a new folder
End	Display the bottom of the active window
Home	Display the top of the active window
F11	Maximize or minimize the active window
Ctrl+Period (.)	Rotate a picture clockwise
Ctrl+Comma (,)	Rotate a picture counter-clockwise
Num Lock+Asterisk (*) on numeric keypad	Display all subfolders under the selected folder
Num Lock+Plus Sign (+) on numeric keypad	Display the contents of the selected folder
Num Lock+Minus Sign (-) on numeric keypad	Collapse the selected folder
Left Arrow	Collapse the current selection (if it's expanded), or select the parent folder
Alt+Enter	Open the Properties dialog box for the selected item
Alt+P	Display the preview pane
Alt+Left Arrow	View the previous folder
Backspace	View the previous folder
Right Arrow	Display the current selection (if it's collapsed), or select the first subfolder
Alt+Right Arrow	View the next folder
Alt+Up Arrow	View the parent folder
Ctrl+Shift+E	Display all folders above the selected folder
Ctrl+Mouse scroll wheel	Change the size and appearance of file and folder icons
Alt+D	Select the address bar
Ctrl+E	Select the search box
Ctrl+F	Select the search box

Taskbar keyboard shortcuts

The following table contains keyboard shortcuts for working with items on the taskbar.

Press this key	To do this
Shift+Click on a taskbar button	Open a program or quickly open another instance of a program
Ctrl+Shift+Click on a taskbar button	Open a program as an administrator
Shift+Right-click on a taskbar button	Show the window menu for the program
Shift+Right-click on a grouped taskbar button	Show the window menu for the group
Ctrl+Click on a grouped taskbar button	Cycle through the windows of the group

Magnifier keyboard shortcuts

The following table contains keyboard shortcuts for working with Magnifier.

Press this key	To do this
Windows logo key + Plus Sign (+) or Minus Sign (-)	Zoom in or out
Ctrl+Alt+Spacebar	Preview the desktop in full-screen mode
Ctrl+Alt+F	Switch to full-screen mode
Ctrl+Alt+L	Switch to lens mode
Ctrl+Alt+D	Switch to docked mode
Ctrl+Alt+I	Invert colors
Ctrl+Alt+arrow keys	Pan in the direction of the arrow keys
Ctrl+Alt+R	Resize the lens
Windows logo key + Esc	Exit Magnifier

Remote Desktop Connection keyboard shortcuts

The following table contains keyboard shortcuts for working with Remote Desktop Connection.

Press this key	To do this
Alt+Page Up	Move between programs from left to right.
Alt+Page Down	Move between programs from right to left.
Alt+Insert	Cycle through programs in the order that they were started in.
Alt+Home	Display the Start menu.
Ctrl+Alt+Break	Switch between a window and full screen.
Ctrl+Alt+End	Display the Windows Security dialog box.
Alt+Delete	Display the system menu.
Ctrl+Alt+Minus Sign (-) on the numeric keypad	Place a copy of the active window, within the client, on the Terminal server clipboard (provides the same functionality as pressing Alt+PrtScn on a local computer).
Ctrl+Alt+Plus Sign (+) on the numeric keypad	Place a copy of the entire client window area on the Terminal server clipboard (provides the same functionality as pressing PrtScn on a local computer).
Ctrl+Alt+Right Arrow	“Tab” out of the Remote Desktop controls to a control in the host program (for example, a button or a text box). Useful when the Remote Desktop controls are embedded in another (host) program.
Ctrl+Alt+Left Arrow	“Tab” out of the Remote Desktop controls to a control in the host program (for example, a button or a text box). Useful when the Remote Desktop controls are embedded in another (host) program.

Note

Ctrl+Alt+Break and Ctrl+Alt+End are available in all Remote Desktop sessions, even when you've set up the remote computer to recognize Windows keyboard shortcuts.

Paint keyboard shortcuts

The following table contains keyboard shortcuts for working with Paint.

Press this key	To do this
Ctrl+N	Create a new picture
Ctrl+O	Open an existing picture
Ctrl+S	Save changes to a picture
F12	Save the picture as a new file
Ctrl+P	Print a picture
Alt+F4	Close a picture and its Paint window
Ctrl+Z	Undo a change
Ctrl+Y	Redo a change
Ctrl+A	Select the entire picture
Ctrl+X	Cut a selection
Ctrl+C	Copy a selection to the Clipboard
Ctrl+V	Paste a selection from the Clipboard
Right Arrow	Move the selection or active shape right by one pixel
Left Arrow	Move the selection or active shape left by one pixel
Down Arrow	Move the selection or active shape down by one pixel
Up Arrow	Move the selection or active shape up by one pixel
Esc	Cancel a selection
Delete	Delete a selection
Ctrl+B	Bold selected text
Ctrl++	Increase the width of a brush, line, or shape outline by one pixel
Ctrl+-	Decrease the width of a brush, line, or shape outline by one pixel
Ctrl+I	Italicize selected text
Ctrl+U	Underline selected text
Ctrl+E	Open the Properties dialog box
Ctrl+W	Open the Resize and Skew dialog box
Ctrl+Page Up	Zoom in
Ctrl+Page Down	Zoom out
F11	View a picture in full-screen mode
Ctrl+R	Show or hide the ruler
Ctrl+G	Show or hide gridlines
F10 or Alt	Display keytips
Shift+F10	Show the current shortcut menu
F1	Open Paint Help

WordPad keyboard shortcuts

The following table contains keyboard shortcuts for working with WordPad.

Press this key	To do this
Ctrl+N	Create a new document
Ctrl+O	Open an existing document
Ctrl+S	Save changes to a document
F12	Save the document as a new file
Ctrl+P	Print a document
Alt+F4	Close WordPad
Ctrl+Z	Undo a change
Ctrl+Y	Redo a change
Ctrl+A	Select the entire document
Ctrl+X	Cut a selection
Ctrl+C	Copy a selection to the Clipboard
Ctrl+V	Paste a selection from the Clipboard
Ctrl+B	Make selected text bold
Ctrl+I	Italicize selected text
Ctrl+U	Underline selected text
Ctrl+=	Make selected text subscript
Ctrl+Shift+=	Make selected text superscript
Ctrl+L	Align text left
Ctrl+E	Align text center
Ctrl+R	Align text right
Ctrl+J	Justify text
Ctrl+1	Set single line spacing
Ctrl+2	Set double line spacing
Ctrl+5	Set line spacing to 1.5
Ctrl+Shift+>	Increase the font size
Ctrl+Shift+<	Decrease the font size
Ctrl+Shift+A	Change characters to all capitals
Ctrl+Shift+L	Change the bullet style
Ctrl+D	Insert a Microsoft Paint drawing
Ctrl+F	Find text in a document
F3	Find the next instance of the text in the Find dialog box
Ctrl+H	Replace text in a document
Ctrl+Left Arrow	Move the cursor one word to the left
Ctrl+Right Arrow	Move the cursor one word to the right
Ctrl+Up Arrow	Move the cursor to the line above
Ctrl+Down Arrow	Move the cursor to the line below
Ctrl+Home	Move to the beginning of the document
Ctrl+End	Move to the end of the document
Ctrl+Page Up	Move up one page
Ctrl+Page Down	Move down one page
Ctrl+Delete	Delete the next word
F10	Display keytips
Shift+F10	Show the current shortcut menu
F1	Open WordPad Help

Calculator keyboard shortcuts

The following table contains keyboard shortcuts for working with Calculator.

Press this key	To do this
Alt+1	Switch to Standard mode
Alt+2	Switch to Scientific mode
Alt+3	Switch to Programmer mode
Alt+4	Switch to Statistics mode
Ctrl+E	Open date calculations
Ctrl+H	Turn calculation history on or off
Ctrl+U	Open unit conversion
Alt+C	Calculate or solve date calculations and worksheets
F1	Open Calculator Help
Ctrl+Q	Press the M- button
Ctrl+P	Press the M+ button
Ctrl+M	Press the MS button
Ctrl+R	Press the MR button
Ctrl+L	Press the MC button
%	Press the % button
F9	Press the +/– button
/	Press the / button
*	Press the * button
+	Press the + button
-	Press the – button
R	Press the 1/× button
@	Press the square root button
0-9	Press the number buttons (0-9)
=	Press the = button
.	Press the . (decimal point) button
Backspace	Press the backspace button
Esc	Press the C button
Del	Press the CE button
Ctrl+Shift+D	Clear the calculation history
F2	Edit the calculation history
Up Arrow key	Navigate up in the calculation history
Down Arrow key	Navigate down in the calculation history
Esc	Cancel editing the calculation history
Enter	Recalculate the calculation history after editing
F3	Select Degrees in Scientific mode
F4	Select Radians in Scientific mode
F5	Select Grads in Scientific mode
I	Press the Inv button in Scientific mode
D	Press the Mod button in Scientific mode
Ctrl+S	Press the sinh button in Scientific mode
Ctrl+O	Press the cosh button in Scientific mode
Ctrl+T	Press the tanh button in Scientific mode
(	Press the ( button in Scientific mode
)	Press the ) button in Scientific mode
N	Press the ln button in Scientific mode
;	Press the Int button in Scientific mode
S	Press the sin button in Scientific mode
O	Press the cos button in Scientific mode
T	Press the tan button in Scientific mode
M	Press the dms button in Scientific mode
P	Press the pi button in Scientific mode
V	Press the F-E button in Scientific mode
X	Press the Exp button in Scientific mode
Q	Press the x^2 button in Scientific mode
Y	Press the x^y button in Scientific mode
#	Press the x^3 button in Scientific mode
L	Press the log button in Scientific mode
!	Press the n! button in Scientific mode
Ctrl+Y	Press the y√x button in Scientific mode
Ctrl+B	Press the 3√x button in Scientific mode
Ctrl+G	Press the 10x button in Scientific mode
F5	Select Hex in Programmer mode
F6	Select Dec in Programmer mode
F7	Select Oct in Programmer mode
F8	Select Bin in Programmer mode
F12	Select Qword in Programmer mode
F2	Select Dword in Programmer mode
F3	Select Word in Programmer mode
F4	Select Byte in Programmer mode
K	Press the RoR button in Programmer mode
J	Press the RoL button in Programmer mode
<	Press the Lsh button in Programmer mode
>	Press the Rsh button in Programmer mode
%	Press the Mod button in Programmer mode
(	Press the ( button in Programmer mode
)	Press the ) button in Programmer mode
\|	Press the Or button in Programmer mode
^	Press the Xor button in Programmer mode
~	Press the Not button in Programmer mode
&	Press the And button in Programmer mode
A-F	Press the A-F buttons in Programmer mode
Spacebar	Toggles the bit value in Programmer mode
A	Press the Average button in Statistics mode
Ctrl+A	Press the Average Sq button in Statistics mode
S	Press the Sum button in Statistics mode
Ctrl+S	Press the Sum Sq button in Statistics mode
T	Press the S.D. button in Statistics mode
Ctrl+T	Press the Inv S.D. button in Statistics mode
D	Press the CAD button in Statistics mode

Windows Journal keyboard shortcuts

The following table contains keyboard shortcuts for working with Windows Journal.

Press this key	To do this
Ctrl+N	Start a new note
Ctrl+O	Open a recently used note
Ctrl+S	Save changes to a note
Ctrl+Shift+V	Move a note to a specific folder
Ctrl+P	Print a note
Alt+F4	Close a note and its Journal window
Ctrl+Z	Undo a change
Ctrl+Y	Redo a change
Ctrl+A	Select all items on a page
Ctrl+X	Cut a selection
Ctrl+C	Copy a selection to the Clipboard
Ctrl+V	Paste a selection from the Clipboard
Esc	Cancel a selection
Delete	Delete a selection
Ctrl+F	Start a basic find
Ctrl+G	Go to a page
F5	Refresh find results
F5	Refresh the note list
F6	Toggle between a note list and a note
Ctrl+Shift+C	Display a shortcut menu for column headings in a note list
F11	View a note in full-screen mode
F1	Open Journal Help

Windows Help viewer keyboard shortcuts

The following table contains keyboard shortcuts for working with the Help viewer.

Press this key	To do this
Alt+C	Display the Table of Contents
Alt+N	Display the Connection Settings menu
F10	Display the Options menu
Alt+Left Arrow	Move back to the previously viewed topic
Alt+Right Arrow	Move forward to the next (previously viewed) topic
Alt+A	Display the customer support page
Alt+Home	Display the Help and Support home page
Home	Move to the beginning of a topic
End	Move to the end of a topic
Ctrl+F	Search the current topic
Ctrl+P	Print a topic
F3	Move the cursor to the search box

Windows 7 tips, tricks and secrets

noreply@blogger.com (Anonymous) — Wed, 22 Aug 2012 20:02:00 +0000

Whether you've just bought a new PC running Windows 7 or you've been using it for a while, there are bound to be things you didn't know you could do.
Whether it's tweaks to get the desktop the way you want it, tips for troubleshooting or ways to squeeze more performance from Windows 7, we've got it covered.

1. Problem Steps Recorder
As the local PC guru you're probably very used to friends and family asking for help with their computer problems, yet having no idea how to clearly describe what's going on. It's frustrating, but Microsoft feels your pain, and Windows 7 will include an excellent new solution in the Problem Steps Recorder.
When any app starts misbehaving under Windows 7 then all your friends need do is click Start, type PSR and press Enter, then click Start Record. If they then work through whatever they're doing then the Problem Steps Recorder will record every click and keypress, take screen grabs, and package everything up into a single zipped MHTML file when they're finished, ready for emailing to you. It's quick, easy and effective, and will save you hours of troubleshooting time.
2. Burn images
Windows 7 finally introduces a feature that other operating systems have had for years - the ability to burn ISO images to CDs or DVDs. And it couldn't be much easier to use. Just double-click the ISO image, choose the drive with the blank disc, click Burn and watch as your disc is created.
3. Create and mount VHD files
Microsoft's Virtual PC creates its virtual machine hard drives in VHD files, and Windows 7 can now mount these directly so you can access them in the host system. Click Start, type diskmgmt.msc and press Enter, then click Action > Attach VHD and choose the file you'd like to mount. It will then appear as a virtual drive in Explorer and can be accessed, copied or written just like any other drive.
Click Action > Create VHD and you can now create a new virtual drive of your own (right-click it, select Initialise Disk, and after it's set up right-click the unallocated space and select New Simple Volume to set this up). Again, you'll be left with a virtual drive that behaves just like any other, where you can drag and drop files, install programs, test partitioning software or do whatever you like. But it's actually just this VHD file on your real hard drive which you can easily back up or share with others. Right-click the disk (that's the left-hand label that says "Disk 2" or whatever) and select Detach VHD to remove it.
The command line DISKPART utility has also been upgraded with tools to detach a VHD file, and an EXPAND command to increase a virtual disk's maximum size. Don't play around with this unless you know what you're doing, though - it's all too easy to trash your system.
4. Troubleshoot problems
If some part of Windows 7 is behaving strangely, and you don't know why, then click Control Panel > Find and fix problems (or 'Troubleshooting') to access the new troubleshooting packs. These are simple wizards that will resolve common problems, check your settings, clean up your system and more.
5. Startup repair
If you've downloaded Windows 7 (and even if you haven't) it's a good idea to create a system repair disc straight away in case you run into problems booting the OS later on. Click Start > Maintenance > Create a System Repair Disc, and let Windows 7 build a bootable emergency disc. If the worst does happen then it could be the only way to get your PC running again.
6. Take control
Tired of the kids installing dubious software or running applications you'd rather they left alone? AppLocker is a new Windows 7 feature that ensures users can only run the programs you specify. Don't worry, that's easier to set up than it sounds: you can create a rule to allow everything signed by a particular publisher, so choose Microsoft, say, and that one rule will let you run all signed Microsoft applications. Launch GPEDIT.MSC and go to Computer Configuration > Windows Settings > Security Settings > Application Control Policies > AppLocker to get a feel for how this works.
7. Calculate more
At first glance the Windows 7 calculator looks just like Vista's version, but explore the Mode menu and you'll see powerful new Statistics and Programmer views. And if you're clueless about bitwise manipulation, then try the Options menu instead. This offers many different unit conversions (length, weight, volume and more), date calculations (how many days between two dates?), and spreadsheet-type templates to help you calculate vehicle mileage, mortgage rates and more.
Don't take any Windows 7 applet at face value, then - there are some very powerful new features hidden in the background. Be sure to explore every option in all Windows applets to ensure you don't miss anything important.

CALCULATE MORE:The new Calculator is packed with useful features and functionality

8. Switch to a projector
Windows 7 now provides a standard way to switch your display from one monitor to another, or a projector - just press Win+P or run DisplaySwitch.exe and choose your preferred display. (This will have no effect if you've only one display connected.)
9. Get a power efficiency report
If you have a laptop, you can use the efficiency calculator to get Windows 7 to generate loads of useful information about its power consumption. Used in the right way, this can help you make huge gains in terms of battery life and performance. To do this you must open a command prompt as an administrator by typing 'cmd' in Start Search, and when the cmd icon appears, right-click it and choose Run as administrator.
Then at the command line, just type in 'powercfg -energy' (without quotes) and hit Return, and Windows 7 will scan your system looking for ways to improve power efficiency. It will then publish the results in an HTML file, usually in the System32 folder. Just follow the path it gives you to find your report.
10. Understanding System Restore
Using System Restore in previous versions of Windows has been something of a gamble. There's no way of telling which applications or drivers it might affect - you just have to try it and see.
Windows 7 is different. Right-click Computer, select Properties > System Protection > System Restore > Next, and choose the restore point you'd like to use. Click the new button to 'Scan for affected programs' and Windows will tell you which (if any) programs and drivers will be deleted or recovered by selecting this restore point.
11. Set the time zone
System administrators will appreciate the new command line tzutil.exe utility, which lets you set a PC's time zone from scripts. If you wanted to set a PC to Greenwich Mean Time, for instance, you'd use the command
tzutil /s "gmt standard time"
The command "tzutil /g" displays the current time zone, "tzutil /l" lists all possible time zones, and "tzutil /?" displays details on how the command works.
12. Calibrate your screen
The colours you see on your screen will vary depending on your monitor, graphics cards settings, lighting and more, yet most people use the same default Windows colour profile. And that means a digital photo you think looks perfect might appear very poor to everybody else. Fortunately Windows 7 now provides a Display Colour Calibration Wizard that helps you properly set up your brightness, contrast and colour settings, and a ClearType tuner to ensure text is crisp and sharp. Click Start, type DCCW and press Enter to give it a try.
13. Clean up Live Essentials
Installing Windows Live Essentials will get you the new versions of Mail, Movie Maker, Photo Gallery and others - great. Unfortunately it also includes other components that may be unnecessary, but if you like to keep a clean system then these can be quickly removed.
If you left the default "Set your search provider" option selected during installation, for instance, Windows Live will install Choice Guard, a tool to set your browser home page and search engine, and prevent other programs from changing them. If this causes problems later, or you just decide you don't need it, then Choice Guard may be removed by clicking Start, typing msiexec /x {F0E12BBA-AD66-4022-A453-A1C8A0C4D570} and pressing [Enter].
Windows Live Essentials also adds an ActiveX Control to help upload your files to Windows Live SkyDrive, as well as the Windows Live Sign-in Assistant, which makes it easier to manage and switch between multiple Windows Live accounts. If you're sure you'll never need either then remove them with the Control Panel "Uninstall a Program" applet.
14. Add network support
By default Windows Live MovieMaker won't let you import files over a network, but a quick Registry tweak will change this. Run REGEDIT, browse to HKEY_CURRENT_USER\Software\Microsoft\Windows Live\Movie Maker, add a DWORD value called AllowNetworkFiles and set it to 1 to add network support.
15. Activate XP mode
If you've old but important software that no longer runs under Windows 7, then you could try using XP Mode, a virtual copy of XP that runs in a window on your Windows 7 desktop. But there's a big potential problem, as XP Mode only works with systems that have hardware virtualisation (AMD-V or Intel VT) built-in and turned on. If you've a compatible CPU then this may just be a matter of enabling the option in your BIOS set-up program, however some high profile brands, including Sony Vaio, disable the setting for "security reasons". And that blocks XP Mode from working, too.
One solution has emerged, but it's a little risky, as essentially you'll have to alter a byte in your laptop firmware and hope this doesn't have any unexpected side-effects. Gulp. If you're feeling brave then take a look at the Feature Enable Blog for the details, but don't blame us if it goes wrong.
A safer approach might be to use VirtualBox, a virtualisation tool that doesn't insist on hardware support, but then you will need to find a licensed copy of XP (or whatever other Windows version your software requires) for its virtual machine.
16. Enable virtual Wi-Fi
Windows 7 includes a little-known new feature called Virtual Wi-Fi, which effectively turns your PC or laptop into a software-based router. Any other Wi-Fi-enabled devices within range - a desktop, laptop, an iPod perhaps - will "see" you as a new network and, once logged on, immediately be able to share your internet connection.
This will only work if your wireless adapter driver supports it, though, and not all do. Check with your adapter manufacturer and make sure you've installed the very latest drivers to give you the best chance.
Once you have driver support then the easiest approach is to get a network tool that can set up virtual Wi-Fi for you. Virtual Router (below) is free, easy to use and should have you sharing your internet connection very quickly.

17. Recover locked-up apps
If an application locks up under a previous version of Windows then there was nothing you could do about it. A new Windows 7 option, however, can not only explain the problem, but may get your program working again without any loss of data.
When the lockup occurs, click Start, type RESMON and click the RESMON.EXE link to launch the Resource Monitor.
Find your frozen process in the CPU pane (it should be highlighted in red), right-click it and select Analyze Wait Chain.
If you see at least two processes in the list, then the lowest, at the end of the tree, is the one holding up your program. If it's not a vital Windows component, or anything else critical, then save any work in other open applications, check the box next to this process, click End Process, and your locked-up program will often spring back to life.

18. Fault-Tolerant Help
Windows 7 includes a new feature called the Fault Tolerant Help (FTH), a clever technology that looks out for unstable processes, detects those that may be crashing due to memory issues, and applies several real-time fixes to try and help. If these work, that's fine - if not, the fixes will be undone and they won't be applied to that process again.
While this is very good in theory, it can leave you confused as some applications crash, then start working (sometimes) for no apparent reason. So if you'd like to check if the FTH is running on your PC, launch REGEDIT, and go to HKEY_LOCAL_MACHINE\Software\Microsoft\FTH - any program currently being protected by the FTH will be listed in the State key.
Experienced users may also try tweaking the FTH settings to catch more problems, and perhaps improve system stability. A post on Microsoft's Ask The Performance Team blog (bit.ly/d1JStu) explains what the various FTH Registry keys mean.
19. Automatically switch your default printer
Windows 7's location-aware printing allows the operating system to automatically switch your default printer as you move from one network to another.
To set this up, first click Start, type Devices, and click the Devices and Printers link.
Select a printer and click Manage Default Printers (this is only visible on a mobile device, like a laptop - you won't see it on a PC).
Choose the "Change my default printer when I change networks" option, select a network, the default printer you'd like to use, and click Add.
Repeat the process for other networks available, and pick a default printer for each one.
And now, as you connect to a new network, Windows 7 will check this list and set the default printer to the one that you've defined.

20. Explore God Mode
Windows 7 has changed Control Panel a little, but it's still too difficult to locate all the applets and options that you might need. God Mode, however, while not being particularly godlike, does offer an easier way to access everything you could want from a single folder.
To try this out, create a new folder and rename it to:

The first part, "Everything" will be the folder name, and can be whatever you want: "Super Control Panel", "Advanced", "God Mode" if you prefer.The extension, ED7BA470-8E54-465E-825C-99712043E01C, must be entered exactly as it is here, though, including the curly brackets. When you press [Enter] this part of the name will disappear, and double-clicking the new folder will display shortcuts to functions in the Action Centre, the Network and Sharing Centre, Power options, troubleshooting tools, user accounts and others - more than 260 options in total.

21. Right-click everythingAt first glance Windows 7 bears a striking resemblance to Vista, but there's an easy way to begin spotting the differences - just right-click things.
Right-click an empty part of the desktop, for instance, and you'll find a menu entry to set your screen resolution. No need to go browsing through the display settings any more.
Right-click the Explorer icon on the taskbar for speedy access to common system folders: Documents, Pictures, the Windows folder, and more.
And if you don't plan on using Internet Explorer then you probably won't want its icon permanently displayed on the taskbar. Right-click the icon, select 'Unpin this program from the taskbar', then go install Firefox, instead.
22. Display the old taskbar button context menu
Right-click a taskbar button, though, and you'll now see its jumplist menu. That's a useful new feature, but not much help if you want to access the minimize, maximize, or move options that used to be available. Fortunately there's an easy way to get the old context menu back - just hold down Ctrl and Shift as you right-click the taskbar button.
23. Desktop slideshow
Windows 7 comes with some very attractive new wallpapers, and it's not always easy to decide which one you like the best. So why not let choose a few, and let Windows display them all in a desktop slideshow? Right-click an empty part of the desktop, select Personalise > Desktop Background, then hold down Ctrl as you click on the images you like. Choose how often you'd like the images to be changed (anything from daily to once every 10 seconds), select Shuffle if you'd like the backgrounds to appear in a random order, then click Save Changes and enjoy the show.

DESKTOP SLIDESHOW:Select multiple background images and Windows will cycle through them24. RSS-powered wallpaper
And if a slideshow based on your standard wallpaper isn't enough, then you can always create a theme that extracts images from an RSS feed. For example, Long Zheng has created a few sample themes to illustrate how it works. Jamie Thompson takes this even further, with a theme that always displays the latest BBC news and weather on your desktop. And MakeUseOf have a quick and easy tutorial showing how RSS can get you those gorgeous Bing photographs as your wallpaper.
25. Customise the log-on screen
Changing the Windows log-on screen used to involve some complicated and potentially dangerous hacks, but not any more - Windows 7 makes it easy.
First, browse to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background in REGEDIT, double-click the DWORD key called OEMBackground (not there? Create it) and set its value to 1.
Now find a background image you'd like to use. Make sure it's less than 256KB in size, and matches the aspect ratio of your screen as it'll be stretched to fit.
Next, copy that image into the %windir%\system32\oobe\info\backgrounds folder (create the info\backgrounds folders if they don't exist). Rename the image to backgroundDefault.jpg, reboot, and you should now have a custom log-on image.
Alternatively, use a free tweaking tool to handle everything for you. Logon Changer displays a preview so you can see how the log-on screen will look without rebooting, while the Logon Screen Rotator accepts multiple images and will display a different one every time you log on.
26. Recover screen space
The new Windows 7 taskbar acts as one big quick launch toolbar that can hold whatever program shortcuts you like (just right-click one and select Pin To Taskbar). And that's fine, except it does consume a little more screen real estate than we'd like. Shrink it to a more manageable size by right-clicking the Start orb, then Properties > Taskbar > Use small icons > OK.
27. Enjoy a retro taskbar
Windows 7 now combines taskbar buttons in a way that saves space, but also makes it more difficult to tell at a glance whether an icon represents a running application or a shortcut. If you prefer a more traditional approach, then right-click the taskbar, select Properties, and set Taskbar Buttons to "Combine when taskbar is full". You'll now get a clear and separate button for each running application, making them much easier to identify.
28. Remove taskbar buttons
One problem with the previous tip is the buttons will gobble up valuable taskbar real estate, but you can reduce the impact of this by removing their text captions. Launch REGEDIT, browse to HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics, add a string called MinWidth, set it to 54, and reboot to see the results.
29. Restore the Quick Launch Toolbar
If you're unhappy with the new taskbar, even after shrinking it, then it only takes a moment to restore the old Quick Launch Toolbar.
Right-click the taskbar, choose Toolbars > New Toolbar, type "%UserProfile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch" (less the quotes) into the Folder box and click Select Folder.
Now right-click the taskbar, clear 'Lock the taskbar', and you should see the Quick Launch toolbar, probably to the right. Right-click its divider, clear Show Text and Show Title to minimise the space it takes up. Complete the job by right-clicking the bar and selecting View > Small Icons for the true retro look.
30. Custom power switch
By default, Windows 7 displays a plain text 'Shut down' button on the Start menu, but it only takes a moment to change this action to something else. If you reboot your PC a few times every day then that might make more sense as a default action: right-click the Start orb, select Properties and set the 'Power boot action' to 'Restart' to make it happen.
31. Auto arrange your desktop
If your Windows 7 desktop has icons scattered everywhere then you could right-click it and select View > Auto arrange, just as in Vista. But a simpler solution is just to press and hold down F5, and Windows will automatically arrange its icons for you.
32. Disable smart window arrangement
Windows 7 features interesting new ways to intelligently arrange your windows, so that (for example) if you drag a window to the top of the screen then it will maximise. We like the new system, but if you find it distracting then it's easily disabled. Run REGEDIT, go to HKEY_CURRENT_USER\Control Panel\Desktop, set WindowArrangementActive to 0, reboot, and your windows will behave just as they always did.
33. Browse your tasks
If you prefer the keyboard over the mouse, you will love browsing the taskbar using this nifty shortcut. Press Windows and T, and you move the focus to the left-most icon on the taskbar. Then use your arrow keys to change the focus to other icons, and you get a live preview of every window.
34. Display your drives
Click Computer in Windows 7 and you might see a strange lack of drives, but don't panic, it's just Microsoft trying to be helpful: drives like memory card readers are no longer displayed if they're empty. We think it's an improvement, but if you disagree then it's easy to get your empty drives back. Launch Explorer, click Tools > Folder Options > View and clear 'Hide empty drives in the computer folder'.
35. See more detail
The new and improved Windows 7 magnifier offers a much easier way to zoom in on any area of the screen. Launch it and you can now define a scale factor and docking position, and once activated it can track your keyboard focus around the screen. Press Tab as you move around a dialog box, say, and it'll automatically zoom in on the currently active control.
36. Extend your jumplists
By default a jumplist will display up to 10 items, but it can often be useful to extend this and add a few more. Right-click Start, select Properties > Customize and set "Number of recent items to display in Jump Lists" to the figure you need.
37. Disable Aero Peek
Hover your mouse cursor over the bottom right hand corner of the screen and Windows 7 will hide open windows, showing you the desktop. Seems like a good idea to us, but if the feature gets in your way then it's easy to turn off. Simply right-click the Start orb, select Properties > Taskbar and clear the "Use Aero Peek to preview the desktop" box.
38. Pin a drive to the taskbar
The taskbar isn't just for apps and documents. With just a few seconds work you can pin drive icons there, too.
Right-click an empty part of the desktop, select New > Text File, and rename the file to drive.exe. Drag and drop this onto your taskbar, then delete the original file.
Right-click your new "drive.exe" taskbar button, then right-click its file name and select Properties. Change the contents of both the Target and Start In boxes to point at the drive or folder of your choice, perhaps click Change Icon to choose an appropriate drive icon, and you're done - that drive or folder is now available at a click.

39. Expand your taskbar previewsMove your mouse cursor over a Windows 7 taskbar button and you'll see a small preview of the application window. To make this larger, launch REGEDIT, browse to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Taskband, right-click in the right hand pane and create a new DWORD value called MinThumbSizePx. Double-click this, choose the Decimal option, set the value to 350 and reboot to see the results. Tweak the value again to fine-tune the results, or delete it to return to the default thumbnail size.

40. Hiding the Windows Live Messenger icon
If you use Windows Live Messenger a lot, you'll have noticed that the icon now resides on the taskbar, where you can easily change status and quickly send an IM to someone. If you prefer to keep Windows Live Messenger in the system tray, where it's been for previous releases, just close Windows Live Messenger, edit the shortcut properties and set the application to run in Windows Vista compatibility mode.
41. Customise UAC
Windows Vista's User Account Control was a good idea in practice, but poor implementation put many people off - it raised far too many alerts. Fortunately Windows 7 displays less warnings by default, and lets you further fine-tune UAC to suit your preferred balance between security and a pop-up free life (Start > Control Panel > Change User Account Control Settings).
42. Use Sticky Notes
The Sticky Notes app is both simpler and more useful in Windows 7. Launch StikyNot.exe and you can type notes at the keyboard; right-click a note to change its colour; click the + sign on the note title bar to add another note; and click a note and press Alt + 4 to close the note windows (your notes are automatically saved).
43. Open folder in new process
By default Windows 7 opens folders in the same process. This saves system resources, but means one folder crash can bring down the entire shell. If your system seems unstable, or you're doing something in Explorer that regularly seems to causes crashes, then open Computer, hold down Shift, right-click on your drive and select Open in New Process. The folder will now be launched in a separate process, and so a crash is less likely to affect anything else.
44. Watch more videos
Windows Media Player 12 is a powerful program, but it still won't play all the audio and video files you'll find online. Fortunately the first freeware Windows 7 codecs package [shark007.net/win7codecs.html] has been released, and installing it could get your troublesome multimedia files playing again.
45. Preview fonts
Open the Fonts window in Windows XP and Vista and you'll see the font names, probably with icons to tell you whether they're TrueType or OpenType, but that's about it. Windows 7 sees some useful font-related improvements.
Open the new fonts window and you'll find a little preview for every font, giving you a quick idea of how they're going to look.
The tedium of scrolling through multiple entries for each family, like Times New Roman, Times New Roman Bold, Times New Roman Bold Italic and so on, has finally ended. There's now just a single entry for each font (though you can still see all other members of the family).
And there's a new OpenType font, Gabriola, added to the mix. It's an attractive script font, well worth a try the next time you need a stylish document that stands out from the crowd.
46. Restore your gadgets
Windows 7 has tightened up its security by refusing to run gadgets if UAC has been turned off, so limiting the damage malicious unsigned gadgets can do to your system. If you've disabled UAC, miss your gadgets and are happy to accept the security risk, though, there's an easy Registry way to get everything back to normal. Run REGEDIT, go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Sidebar\Settings, create a new DWORD value called AllowElevatedProcess and set it to 1. Your gadgets should start working again right away.
47. New WordPad formats
By default WordPad will save documents in Rich Text Format, just as before. But browse the Save As Format list and you'll see you can also save (or open, actually) files in the Office 2007 .docx or OpenDocument .odt formats.
48. Protect your data
USB flash drives are convenient, portable, and very easy to lose. Which is a problem, especially if they're carrying sensitive data. Fortunately Windows 7 has the solution: encrypt your documents with an extension of Microsoft's BitLocker technology, and only someone with the password will be able to access it. Right-click your USB flash drive, select Turn on BitLocker and follow the instructions to protect your private files.

PROTECT YOUR DATA:Your USB flash drives can easily be encrypted with BitLocker49. Minimise quickly with shakeIf you have multiple windows open on your desktop and things are getting too cluttered, it used to be a time-consuming process to close them all down. In Windows 7 you can use the Aero Shake feature to minimise everything in seconds, using a cool mouse gesture. Grab the title bar of the window you wish to keep open and give it a shake, and rejoice in a clear desktop area.
50. Configure your favourite music
The Windows 7 Media Centre now comes with an option to play your favourite music, which by default creates a changing list of songs based on your ratings, how often you play them, and when they were added (it's assumed you'll prefer songs you've added in the last 30 days). If this doesn't work then you can tweak how Media Centre decides what a "favourite" tune is- click Tasks > Settings > Music > Favourite Music and configure the program to suit your needs.
51. Customise System Restore
There was very little you could do to configure System Restore in Vista, but Windows 7 improves the situation with a couple of useful setup options.
Click the Start orb, right-click Computer and select Properties > System Protection > Configure, and set the Max Usage value to a size that suits your needs (larger to hold more restore points, smaller to save disk space).
And if you don't need System Restore to save Windows settings then choose the "Only restore previous versions of files" option. Windows 7 won't back up your Registry, which means you'll squeeze more restore points and file backups into the available disk space. System Restore is much less likely to get an unbootable PC working again, though, so use this trick at your own risk.
52. Run As
Hold down Shift, right-click any program shortcut, and you'll see an option to run the program as a different user, handy if you're logged in to the kids' limited account and need to run something with higher privileges. This isn't really a new feature - Windows XP had a Run As option that did the same thing - but Microsoft stripped it out of Vista, so it's good to see it's had a change of heart.
53. Search privacy
By default Windows 7 will remember your PC search queries, and display the most recent examples when searching in Windows Explorer. If you're sharing a PC and don't want everyone to see your searches, then launch GPEDIT.MSC, go to User Configuration > Administrative Templates > Windows Components > Windows Explorer, double-click "Turn off display of recent search entries..." and click Enabled > OK.
54. Tweak PC volume
By default Windows 7 will now automatically reduce the volume of your PC's sounds whenever it detects you're making or receiving PC-based phone calls. If this proves annoying (or maybe you'd like it to turn off other sounds altogether) then you can easily change the settings accordingly. Just right-click the speaker icon in your taskbar, select Sounds > Communications, and tell Windows what you'd like it to do.
55. Rearrange the system tray
With Windows 7 we finally see system tray icons behave in a similar way to everything else on the taskbar. So if you want to rearrange them, then go right ahead, just drag and drop them into the order you like. You can even move important icons outside of the tray, drop them onto the desktop, then put them back when you no longer need to keep an eye on them.
56. Extend your battery life
Windows 7 includes new power options that will help to improve your notebook's battery life. To see them, click Start, type Power Options and click the Power Options link, then click Change Plan Settings for your current plan and select Change Advanced Settings. Expand Multimedia Settings, for instance, and you'll see a new "playing video" setting that can be set to optimise power savings rather than performance. Browse through the other settings and ensure they're set up to suit your needs.
57. Write crash dump files
Windows 7 won't create memory.dmp crash files if you've less than 25GB of free hard drive space, annoying if you've installed the Windows debugging tools and want to diagnose your crashes. You can turn this feature off, though: browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl, create a new DWORD value called AlwaysKeepMemoryDump, set it to 1, and the crash dump file will now always be saved.
58. Protect your data
If you have confidential files in a particular folder or two, and would like to keep them away from other network users, then right-click the folder, select Share With > Nobody, and they'll be made private, for your eyes only (or your user account, anyway).
59. Reorganise the taskbar
Windows 7 taskbar buttons are now movable - feel free to drag, drop and otherwise reorganise them to suit your needs. And then remember that each button can be launched by holding with the Windows key and pressing 1 to activate the first, 2 the second and so on, up to 0 for the tenth.
60. Repair your PC
If Windows 7 won't start, you may not need an installation or repair disc any more, as the repair environment is now usually installed on your hard drive. Press [F8] as your PC starts, and if you see a "Repair Your Computer" option, choose that to see the full range of Windows 7 recovery tools.

61. ReadyBoost revampedIf you were unimpressed by ReadyBoost in Vista, it may be worth trying the technology again under Windows 7. The operating system now allows you to combine multiple USB drives, each with larger caches, to deliver an extra speed boost.62. Fixing Windows 7 N
If you have Windows 7 N then this means you'll be missing key multimedia applications, like Media Player, Media Centre, DVD Maker and more. But that's not all. You also won't have some of the subsystems required by third-party apps like Nero MultiMedia Suite, which means that even if they install, you could have problems getting them to work correctly.

Fortunately there's an easy fix, though, as the missing components are available in the form of Microsoft's Windows Media Pack. If you're currently having media-related issues on a Windows 7 N installation, grab your copy from support.microsoft.com/kb/968211.

63. Find bottlenecks

From what we've seen so far Windows 7 is already performing better than Vista, but if your PC seems sluggish then it's now much easier to uncover the bottleneck. Click Start, type RESMON and press Enter to launch the Resource Monitor, then click the CPU, Memory, Disk or Network tabs. Windows 7 will immediately show which processes are hogging the most system resources.

The CPU view is particularly useful, and provides something like a more powerful version of Task Manager. If a program has locked up, for example, then right-click its name in the list and select Analyze Process. Windows will then try to tell you why it's hanging - the program might be waiting for another process, perhaps - which could give you the information you need to fix the problem.

FIND BOTTLENECKS:Resource monitor keeps a careful eye on exactly how your PC is being used

64. Keyboard shortcuts

Windows 7 supports several useful new keyboard shortcuts.

Alt+P
Display/ hide the Explorer preview pane

Windows Logo+G
Display gadgets in front of other windows

Windows Logo++ (plus key)
Zoom in, where appropriate

Windows Logo+- (minus key)
Zoom out, where appropriate

Windows Logo+Up
Maximise the current window

Windows Logo+Down
Minimise the current window

Windows Logo+Left
Snap to the left hand side of the screen

Windows Logo+Right
Snap to the right hand side of the screen

Windows Logo+Home
Minimise/ restore everything except the current window

65. Drag and drop to the command line

When working at the command line you'll often need to access files, which usually means typing lengthy paths and hoping you've got them right. But Windows 7 offers an easier way. Simply drag and drop the file onto your command window and the full path will appear, complete with quotes and ready to be used.

This feature isn't entirely new: you could do this in Windows XP, too, but drag and drop support disappeared in Vista. There does seem to be a new Windows 7 complication, though, in that it only seems to work when you open the command prompt as a regular user. Run cmd.exe as an administrator and, while it accepts dropped files, the path doesn't appear.

66. Customise your jumplists

Right-click an icon on your taskbar, perhaps Notepad, and you'll see a jumplist menu that provides easy access to the documents you've been working on recently. But maybe there's another document that you'd like to be always available? Then drag and drop it onto the taskbar icon, and it'll be pinned to the top of the jumplist for easier access. Click the pin to the right of the file name, or right-click it and select "Unpin from this list" when you need to remove it.

67. Faster program launches

If you've launched one instance of a program but want to start another, then don't work your way back through the Start menu. It's much quicker to just hold down Shift and click on the program's icon (or middle-click it), and Windows 7 will start a new instance for you.

68. Speedy video access

Want faster access to your Videos folder? Windows 7 now lets you add it to the Start menu. Just right-click the Start orb, click Properties > Start Menu > Customize, and set the Videos option to "Display as a link". If you've a TV tuner that works with Windows 7 then you'll appreciate the new option to display the Recorded TV folder on the Start menu, too.

69. Run web searches

The Windows 7 search tool can now be easily extended to search online resources, just as long as someone creates an appropriate search connector. To add Flickr support, say, visit I Started Something, click Download the Connector, choose the Open option and watch as it's downloaded (the file is tiny, it'll only take a moment). A "Flickr Search" option will be added to your Searches folder, and you'll be able to search images from your desktop.

A multitude of other ready-made searches, such as Google and YouTube, can be downloaded from the windowsclub.com website.

70. Schedule Media Centre downloads

You can now tell Windows Media Centre to download data at a specific time, perhaps overnight, a useful way to prevent it sapping your bandwidth for the rest of the day. Launch Media Centre, go to Tasks > Settings > General > Automatic Download Options, and set the download start and stop times that you'd like it to use.

71. Multi-threaded Robocopies

Anyone who's ever used the excellent command-line robocopy tool will appreciate the new switches introduced with Windows 7. Our favourite, /MT, can improve speed by carrying out multi-threaded copies with the number of threads you specify (you can have up to 128, though that might be going a little too far). Enter robocopy /? at a command line for the full details.

72. Load IE faster

Some Internet Explorer add-ons can take a while to start, dragging down the browser's performance, but at least IE8 can now point a finger at the worst resource hogs. Click Tools > Manage Add-ons, check the Load Time in the right-hand column, and you'll immediately see which browser extensions are slowing you down.

73. An Alt+Tab alternative

You want to access one of the five Explorer windows you have open, but there are so many other programs running that Alt+Tab makes it hard to pick out what you need. The solution? Hold down the Ctrl key while you click on the Explorer icon. Windows 7 will then cycle through the Explorer windows only, a much quicker way to locate the right one. And of course this works with any application that has multiple windows open.

74. Block annoying alerts

Just like Vista, Windows 7 will display a suitably stern warning if it thinks your antivirus, firewall or other security settings are incorrect.

But unlike Vista, if you disagree then you can now turn off alerts on individual topics. If you no longer want to see warnings just because you've dared to turn off the Windows firewall, say, then click Control Panel > System and Security > Action Centre > Change Action Centre settings, clear the Network Firewall box and click OK.

75. Parallel defrags

The standard Windows 7 defragger offers a little more control than we saw in Vista, and the command line version also has some interesting new features. The /r switch will defrag multiple drives in parallel, for instance (they'll obviously need to be physically separate drives for this to be useful). The /h switch runs the defrag at a higher than normal priority, and the /u switch provides regular progress reports so you can see exactly what's going on. Enter the command

defrag /c /h /u /r

in a command window to speedily defrag a system with multiple drives, or enter defrag /? to view the new options for yourself.

76. Fix Explorer

The Windows 7 Explorer has a couple of potential annoyances. Launching Computer will no longer display system folders like Control Panel or Recycle Bin, for instance. And if you're drilling down through a complicated folder structure in the right-hand pane of Explorer, the left-hand tree won't always expand to follow what you're doing, which can make it more difficult to see exactly where you are. Fortunately there's a quick fix: click Organize > Folder and Search Options, check "Show all folders" and "Automatically expand to current folder", and click OK.

77. Faster file handing

If you hold down Shift while right-clicking a file in Explorer, then you'll find the Send To file now includes all your main user folders: Contacts, Documents, Downloads, Music and more. Choose any of these and your file will be moved there immediately.

78. Create folder favourites

If you're regularly working on the same folder in Explorer then select it in the right-hand page, right-click Favourites on the left-hand menu, and select Add to Favourites. It'll then appear at the bottom of the favourites list for easy one-click access later.

79. Disable hibernation

By default Windows 7 will permanently consume a chunk of your hard drive with its hibernation file, but if you never use sleep, and always turn your PC off, then this will never actually be used. To disable hibernation and recover a little hard drive space, launch REGEDIT, browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power, then set both HibernateEnabled and HiberFileSizePerfect to zero.

80. Create a new folder shortcut

When you need to create a new folder in Windows 7 Explorer, don't reach for the mouse. Just press Ctrl+Shift+N to create the folder in the active Explorer window, then type its name as usual.

81. Open a jumplist

Most people right-click a Windows taskbar icon to view its jumplist. You can also hold the left mouse button over the icon, though, then drag upwards to reveal the jumplist and choose the option you need, a more natural action that should be just a little faster.

82. Search quickly

If you'd like to search for something in an Explorer window then there's no need to use the mouse. Simply press [F3] to move the focus to the search box, enter your keyword and press [Enter] to run the search.

83. Search file contents

There's no obvious way in the Windows interface to search the contents of files that haven't been indexed, but all you need to do is start your search with the "content:" search filter. So entering content:Microsoft , for instance, will find all documents (whether they're actually indexed or not) that contain the word Microsoft.

84. Close in a click

Hover your mouse cursor over a Windows taskbar button will display a preview thumbnail of that application window. You don't need that app any more? Then middle-click the thumbnail to close it down.

85. Leave the Homegroup

Homegroups are an easy way to network Windows 7 PCs, but if you don't use the feature then turning it off can save you a few system resources.

Click Start, type Homegroup, and click "Choose homegroup and sharing options". Click Leave the Homegroup > Leave the Homegroup > Finish.

Now click Start, type services.msc and press [Enter] to launch the Services Control Panel applet.

Find and double-click both the HomeGroup Listener and HomeGroup Provider service, clicking Stop and setting Startup Type to Disabled in each case, and the services won't be launched when you need reboot.

Remove Showing Posts With Label In Blogger

noreply@blogger.com (Anonymous) — Sat, 09 May 2009 11:13:00 +0000

How to Remove Showing Posts With Label in Blogger Blogs i.e Show all posts link when we click on the labels link. If you dont like the section below in picture in your blog , then read below how to remove it from your blogger.

Go To Edit Html > Expand Widgets
Search for below codes

<b:includable id='status-message'>
<b:if cond='data:navMessage'>
<div class='status-msg-wrap'>
<div class='status-msg-body'>
<data:navMessage/>
</div>
<div class='status-msg-border'>
<div class='status-msg-bg'>
<div class='status-msg-hidden'><data:navMessage/></div>
</div>
</div>
</div>
<div style='clear: both;'/>
</b:if>
</b:includable>

And now replace above codes with below :-

<b:includable id='status-message'>
<b:if cond='data:navMessage'>
<div>
</div>
<div style='clear: both;'/>
</b:if>
</b:includable>

Now save it. You have Done.

How To Setup Google Apps For CO.CC Domain

noreply@blogger.com (Anonymous) — Wed, 29 Apr 2009 19:17:00 +0000

I have already wrote two Tutorials related to CO.CC Domians.In the 1st one I wrote about how to "Get a Free Domain Name + Free DNS service."
In the 2nd one I discussed the "Easy Way To Setup CO.CC Domain in Blogger".
This time I am here with a 3rd Tutorial related to CO.CC Domains. In this Tutorial I will show you "How To Setup Google Apps For CO.CC Domain".
So lets Get Started

Get a Free Domain Name + Free DNS service.

noreply@blogger.com (Anonymous) — Mon, 27 Apr 2009 19:21:00 +0000

Today I will tell you how you can register your own domain absolutely free yes ABSOLUTELY FREE in just 4 simple steps. I will give you step by step instructions for registering your domain so that you can register your own domain and give some what professional look to your blog, website or forum. So what are you waiting for lets get started.

Search Attachments in GMail Easily

noreply@blogger.com (Anonymous) — Thu, 23 Apr 2009 12:28:00 +0000

Most of us use Gmail, Yahoo or hotmail as our email client. Gmail being the fastest among other two it is widely being used .

Here I will tell you about a hidden hack in gmail.Suppose you want to open an email that was sent to you by some person (name not known) and you only remember that he sent you a ppt (Power Point Presentation) ,then instead of spending time to look emails individually you can do it in few seconds.
Gmail do provide an option to do so but the hack is hidden. You can sort the file types by using the Gmail Search Mail. Follow simple steps to do so.

Step 1 : Type in Gmail Search Box "has:attachment” (without quotes) followed by your file format say pdf or ppt. If you are looking for ppt file, your search command will be.

has:attachment ppt

Step 2 : Hit enter.Your inbox will show the emails having ppt as an attachment.

So instead of spending hours to search for the file this simple trick can be useful to you.

Tabbed Widget For Recent Posts, Labels & Archives

noreply@blogger.com (Anonymous) — Sun, 12 Apr 2009 09:57:00 +0000

About this Tutorial:-
This Great Tutorial is Originally written by Amanda and is available on here blog "www.bloggerbuster.com" through this >Link<. (Thanx Amanda for such a useful Tutorial)
I have used another method to apply this hack. Although the procedure is few steps lengthy but its error free (I Hope So) because the code in the Step 4 is very short. So the chances of error are very very less.

Changes made:-
In the original Tutorial blogger feed was used for Recent Posts. Which is restricted to 5 Recent Posts only. If you follow this Tutorial then you can use your FeedBurner feed also instead of blogger feed. In which u can have as many Recent Posts as u want.

Benefits Of Using This Widget:-
This tabbed widget includes integrated Tabs for recent posts, labels and archives. This customization will organize your blog's widgets and will reduce the space used in your sidebar. And it looks very stylish too.

It is very easy to install and use tabbed sidebar navigation, but may be much more complicated to make this match the style of your own template.For this reason, the style code used for the tabbed widgets, along with methods you could use to change the appearance for your own blog are also explained

Now Lets Start

Step One: Backup Your Template!

When customizing your Blogger template, it is standard practice to back up your existing template first! This ensures you can revert back to your working template if you make a mistake. It is especially important with this customization as you may not notice such mistakes when previewing your design.

To back-up your Blogger template, go to Layout>Edit HTML and click on the "Download full template" link near the top of the page.

You will be prompted to save a copy of your blog template as an XML file to your computer. Be sure to save this to a location where you can easily find it if required.

Step Two: Adding CSS Code

For this initial step of installing tabbed sidebar navigation, we will add the relevant style code. With this in place, it will be easier to see how your tabs will work.

To add this style code, find the closing </b:skin> tag in your template's HTML code.

Just BEFORE this line, paste the following section of code:
Note: Before pasting the below code make the following change.

search for color:$linkcolor;

and replace the "$linkcolor" with the color that u want the link to the recent post should have.
For example if u want that the link to the post in the widget should be be black then simply replace "$linkcolor" with "#000000" with out quotes.

div.domtab
{
padding:0;
width:100%;
font-size:90%;
}
ul.domtabs
{
float:left;
width:100%;
margin:0;
list-style:none;
padding-left: 0;
}
ul.domtabs li
{
float:left;
padding:0 5px 0 0;
text-align: center;
width: 110px;
}
ul.domtabs a:link,
ul.domtabs a:visited,
ul.domtabs a:active,
ul.domtabs a:hover
{
padding:.5em 1em 0;
display:block;
background:#999;
color: #333;
height:2em;
font-weight:bold;
text-decoration:none;
}
html>body ul.domtabs a:link,
html>body ul.domtabs a:visited,
html>body ul.domtabs a:active,
html>body ul.domtabs a:hover
{
height:auto;
min-height:2em;
}
ul.domtabs a:hover
{
background:#ccc;
}
div.domtab div
{
clear:both;
width:auto;
color:#ddd;
padding:0 5px;
margin: 0 0 1em 0;
}
div.domtab div .sidebar-tab, div.domtab div .sidebar-tab .widget-content
{
margin: 0 0 0;
padding: 0;
}
ul.domtabs li.active a:link,
ul.domtabs li.active a:visited,
ul.domtabs li.active a:active,
ul.domtabs li.active a:hover
{
background:#ccc;
color: #333;
}
div.domtab div .sidebar-tab ul li {
list-style: none;
padding: 3px 0 5px 0;
}
div.domtab div .sidebar-tab ul li a
{
list-style: none;
margin: 0;
padding: 0;
}
div.domtab div .sidebar-tab ul
{
width: 100%;
margin: 0;
padding: 0;
}
#domtabprintview{
float:right;
padding-right:1em;
text-align:right;
}
#domtabprintview a:link,
#domtabprintview a:visited,
#domtabprintview a:active,
#domtabprintview a:hover
{
color:#ccc;
}
div.domtab div a:link,
div.domtab div a:visited,
div.domtab div a:active
{
color:$linkcolor;
padding:1em .5em;
font:bodyfont;
text-decoration: none;
}
div.domtab div h2 a,
div.domtab div h2 a:hover,
div.domtab div h2 a:active
{
color:#cfc;
display:inline;
padding:0;
font-weight:normal;
font-size:1em;
}
body#layout #sidebar-tabs-1 .widget,
body#layout #sidebar-tabs-2 .widget,
body#layout #sidebar-tabs-3 .widget {
display: block; clear: both;
}
div.domtab div {display: block; clear: both;}

Be sure to copy all of the code inside this box before you paste this into your template.

Step Three: Add JavaScript Code to the Head Section of your Template

The tabbed navigation requires JavaScript to switch between the different widget areas. To add this functionality to your template, locate the closing </head> tag in your template, and paste the following lines of code immedietly before this line:

<script src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/domtab.js' type='text/javascript'/>

If you prefer to host the JavaScript required for this customization on your own server, feel free to download the script and alter the tags above to reflect the location on your own server.

Save your template at this point.

Step Four: Add The Required Code to your Sidebar

For this step, you will need to find the opening DIV tag for your sidebar.

In most Blogger templates, this tag will appear like this (highlighted in red):

<div id='sidebar-wrapper'>

<b:section class='sidebar' id='sidebar-top-section' preferred='yes'>

<b:widget id='HTML3' locked='false' title='Subscribe' type='HTML'>

However, you may need to be creative! In some templates, the sidebar section is coded like these examples, or possibly something else entirely!

<div id='sidebar>
<div id='right-column'>

Whatever the opening DIV for your sidebar section appears like, you need to paste the following section of code immedietly after it, and before the opening <b:section> tag:

<div class='domtab'>
<ul class='domtabs'>
<li><a href='#recent'>Recent Posts</a></li>
<li><a href='#cats'>Categories</a></li>
<li><a href='#arc'>Archives</a></li>
</ul>

<div style='border: 3px solid #ccc;'>
<p><a id='recent' name='recent'> </a>
<b:section class='sidebar-tab' id='sidebar-tabs-1' preferred='yes'/></p>
</div>

<div id='toggleText' style='display: none; border: 3px solid #ccc;'>
<p><a id='cats' name='cats'> </a><b:section class='sidebar-tab' id='sidebar-tabs-2' preferred='yes'/></p>
</div>

<div id='toggleText' style='display: none; border: 3px solid #ccc;'>
<p><a id='what' name='arc'/>
<a id='arc' name='arc'> </a><b:section class='sidebar-tab' id='sidebar-tabs-3' preferred='yes'/></p>
</div>

</div>

Note:-
I have added the red colored code inside the DIV, which will prevent the opening of all the tabs at once during first loading or Refreshing.

Again, be sure to copy all of the code in the scrolling box above before pasting this into your template.
Now, preview your template. If you have made any errors when copying and pasting the code, you will be unable to preview your template. In this case, click on the "Clear edits" button near the bottom of the page and begin again, ensuring you have copied all of the code from the box above. Be sure you paste your code between the opening DIV tag for your sidebar and the opening b:section tag.

If your installation is successful, you will see a tabbed section above your regular sidebar widgets.Like the one in the below picture.

Step Five:

As the tabbed section is empty i.e only tabs are showing so we will now configure it to show.
=>Recent Posts
=>Categories
=>Archives

In your Blogger Dashboard Go to Layout>Page Elements and look out for the new widget section which should appear like this:

1) Click on the "Recent Posts" link and add then click on "Add a Gadget". It will Pop-up a new window. Select "Feed"

Enter your "Feed" Url which should be like that.

http://YOURBLOG.blogspot.com/feeds/posts/default

Customize it the way u want it to look and save it.This will add your recent posts to your tabbed widget.
You can also use FeedBurner Feed here. For this purpose choose HTML/JavaScript Widget instead of FEED and paste your FeedBurner code there and save it.

2) Now click on the "Categories" link and then click on "Add a Gadget". It will Pop-up a new window. Select "Labels"

and save it.

3) Now Click on the "Archives" link and add then click on "Add a Gadget". It will Pop-up a new window. Select "Blog Archive"

Customize it according to your own choice and save it. Congratulations Your Tabbed Widget Is Ready Now.

Step Six: Customizing the Appearance of your Tabbed Widgets

Depending on the template you are using, this may be the most complicated step of installation!

The default style code I have offered in this tutorial will be suitable for pale templates with a wide sidebar. If you have a narrow sidebar or different color scheme, you will almost certainly need to change some elements of the style!
Here are the most prominent style issues, and what you can do to resolve them:

The tabs appear on top of each other

This will happen if the combined width of your tabs is wider than the width of the sidebar area.

To alter this, you will need to change the width for the tabs. Here is the section of code you need to change:

ul.domtabs li{

float:left;

padding:0 5px 0 0;

text-align: center;

width: 110px;

}

Reduce the width to a smaller pixel value. For example, if your sidebar is 200px wide, change the tab width to 60px. Then the combined width of the three tabs will equal 180px and allow for space between them.

Changing the color of borders and tabs

In the code for this tutorial, I have used two shades of grey for the border and tab colors:

#ccc is the paler grey
#999 is the slightly darker shade

Using your browser's search function, you can locate all instances of these colors in the style section of your template and replace these with the hex values for your preferred colors instead.

Over to you!

As it is mentioned at the beginning of this tutorial, different template designs may require different methods for customizing the appearance of your tabbed widgets. To offer support, a thread has been created by the original author in the Blogger Buster forums specifically for help with this tutorial.

I hope this tutorial has provided a good explanation of how to install tabbed navigation in your Blogger template! Please feel free to leave your comments and opinions about this tutorial, or if you have suggestions for how this may be enhanced.

Social Bookmarking Icons after every blogger Post

noreply@blogger.com (Anonymous) — Fri, 10 Apr 2009 12:55:00 +0000

Most of the bloggers out here know that social bookmarking is so important to us Do u wish to add these bookmarking icons like this:

Bookmark this post:

1)Goto Blogger Template>Edit HTML back up your template and expand the widget templates.

2)Now in your template Find

<head>

and replace it with

<head><script src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/simpletricks.js'> </script>

3)Now find

<p class='post-footer-line post-footer-line-3'>

And place this code below this line:

<style type='text/css'>
.bookmark img { border: 0;
padding:0px; }
.bookmark a:hover {
position: relative;
top: 1px;
left: 1px; }
</style>
<span class='bookmark'>
<table align='left' border='0' cellpadding='0' width='100%'>
<tr>
<td style='vertical-align:middle' valign='middle' width='30%'>
<div expr:id='"sbtxt"+data:post.id'>Bookmark this post<a style="text-decoration:none;" href="http://www.trickstutor.co.cc">:</a></div><script type='text/javascript'>showsbtext("sbtxt" + "<data:post.id/>",0)</script>
</td>
<td>
<a rel="nofollow" expr:href='"http://www.stumbleupon.com/submit?url=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",19);"' target='_blank'><img alt='StumpleUpon' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_stumb.gif'/></a> <a rel="nofollow" expr:href='"http://ma.gnolia.com/bookmarklet/add?url=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",6);"' target='_blank'><img alt='Ma.gnolia' border='0' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_mag.gif'/></a>
<a rel="nofollow" expr:href='"http://digg.com/submit?phase=3&url=" + data:post.url' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",1);"' target='_blank'><img alt='DiggIt!' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_dig.gif'/></a> <a rel="nofollow" expr:href='"http://del.icio.us/post?url=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",2);"' target='_blank'><img alt='Del.icio.us' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_del.gif'/></a> <a rel="nofollow" expr:href='"http://www.blinklist.com/index.php?Action=Blink/addblink.php&Description=&Url=" + data:post.url + "&Title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",3);"' target='_blank'><img alt='Blinklist' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_bli.gif'/></a> <a rel="nofollow" expr:href='"http://myweb2.search.yahoo.com/myresults/bookmarklet?u=" + data:post.url + "&=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",4);"' target='_blank'><img alt='Yahoo' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_yah.gif'/></a> <a rel="nofollow" expr:href='"http://www.furl.net/storeIt.jsp?u=" + data:post.url + "&t=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",8);"' target='_blank'><img alt='Furl' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_fur.gif'/></a> <a rel="nofollow" expr:href='"http://www.technorati.com/cosmos/search.html?url=" + data:post.url' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",9);"' target='_blank'><img alt='Technorati' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_tec.gif'/></a> <a rel="nofollow" expr:href='"http://www.simpy.com/simpy/LinkAdd.do?href=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",10);"' target='_blank'><img alt='Simpy' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_sim.gif'/></a> <a rel="nofollow" expr:href='"http://www.spurl.net/spurl.php?url=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",11);"' target='_blank'><img alt='Spurl' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_spu.gif'/></a> <a rel="nofollow" expr:href='"http://reddit.com/submit?url=" + data:post.url + "&title=" + data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",17);"' target='_blank'><img alt='Reddit' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_red.gif'/></a> <a rel="nofollow" expr:href='"http://www.google.com/bookmarks/mark?op=add&bkmk=" + data:post.url + "&title="+data:post.title' expr:onmouseout='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",0);"' expr:onmouseover='"javascript:showsbtext(\"sbtxt" + data:post.id + "\",20);"' target='_blank'><img alt='Google' src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/icon_sb_goo.gif'/></a>
</td>
</tr>
</table><br/>
</span>

Now save the template.You can edit the text file to remove some of the icons. Credits to Beautiful Beta for developing this awesome javascript.

LIVE DEMO:

How to add a Digg This button in Blogger

noreply@blogger.com (Anonymous) — Fri, 10 Apr 2009 08:55:00 +0000

I don't know who is the original author/creater of this Trick. But I found it on
Source:A Quizzical Reality...

For those who don't know what is Digg:
Digg is a website made for people to discover and share content from anywhere on the Internet, by submitting links and stories, and voting and commenting on submitted links and stories. Voting stories up is called digging. To Digg you must have a Digg account which is free to create. You can sign up for digg at http://digg.com

Now back to business. To digg, its always easier to have a Digg button in your blog posts. Isn't it?

IMPORTANT: You will need to register at digg.com so you can start digging stuff.

Blogger does not allow javascript in posts, and that's the only way Digg.com offers the button, so you'll have to add it to the template, which adds it to every post. If you don't want this, then this article will not help you.

1st thing to do is Backup your template.Open your Blogger Dashboard>Layout>Edit HTML>Click Download Full Template.
Now Click "Expand Widget Template"
You will need to find this piece of code:

<p><data:post.body/></p>

Just Before this line paste the following code:

<div style='float:right; margin-left:10px;'>
<script type='text/javascript'>
digg_url="<data:post.url/>";
</script>
<script src='http://digg.com/tools/diggthis.js' type='text/javascript'/>
</div>

Now, understand this...this code will add a button to all your posts with a "zero" diggs displaying until someone diggs it, and so, you can go and digg your stories first, or wait until one of your readers do it.

The Digg This button will be placed "align=right", top right corner of your post.
To change the alignment just edit this code

style='float:right;

Hope this helps.

Easy Way To Setup CO.CC Domain in Blogger

noreply@blogger.com (Anonymous) — Wed, 08 Apr 2009 20:53:00 +0000

First of all you need a domain name registered at CO.CC in order to set it up for blogger. If you do not already have a CO.CC domain name you can register one by following my tutorial Get a Free Domain Name + Free DNS service. Once you have it Go to your CO.CC domain name account. Then, go to Domain Settings. Click on the domain that you want to setup and click “Set UP“. Then, select the option number 2 which is Zone Records. Fill in the box with all the following value in the picture. Make sure you also include the WWW with it. After that, click setup.

Then, you also should add 3 more zone records to the settings. Why we do this? This is to make sure that your domain also can be accessed with and without the www infront of it. So, if anyone type yourdomain.co.cc instead of www.yourdomain.co.cc, they will be directed to your www.yourdomain.co.cc.

First, you need to add 3 more Zone Record follow by the following diagram. Make sure the Type is A, not CNAME. We have already setup CNAME before. Also do not include the WWW in the domain host. Just put yourdomain.co.cc. Then, use the following for the Value:

64.233.179.121
66.249.81.121
72.14.207.121

When, you’re done you will have 4 Record Zone in your setting. 3 type A and one type CNAME just like the following diagram.

Now, we have already done setup everything in CO.CC. Lets move to the Blogger to setup the domain and replace your blogspot domain with this free domain name. In your blogger dashboard, click on Settings.

After Setting, click on the Publishing Tab. Then, select Custom Domain and click on Switch to advanced settings. Fill your domain name in the your domain including with WWW in it. Enter the word verification and lastly click Save Settings.

After Saving Settings a new OPTION will appear with under the Domain name as shown in the figure check the box. Enabling this option will Redirect yourdomain.co.cc to www.yourdomain.co.cc.

Now you’re DONE! The domain name will setup after a few minutes or hour or maybe taking a day or two. Just wait for it. During this period you may see your domain name still redirect to co.cc main homepage. But don’t worry, it is a normal situation for a domain to update. Just wait for it.
Stay tuned.

Multi Tabbed Widget For Blogger

noreply@blogger.com (Anonymous) — Wed, 08 Apr 2009 08:16:00 +0000

Here's a simple and useful multi-tabbed widget. It is very easy to edit and add this widget to your blog. You can easily control the number of tabs in the widget.
Your widget should look like this:

Steps for Implementation:

Go to Layout >Edit HTML in your Blogger Dashboard.
Back up your existing Template before making any changes!

Search for the </head> tag.

Add the following code just before the </head> tag.

<script src='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/tabber.js' type='text/javascript'/>
<link MEDIA='screen' TYPE='text/css' href='http://files.trickstutor.co.cc/uploads/2/1/4/1/2141293/example.css' rel='stylesheet'/>

Now go to Layout -> Page Elements, and click on "Add a Gadget", select it as "HTML/JavaScript" type.

Now paste this code in to the widget:

<div class="tabber">

<div class="tabbertab">
<h2>Tab 1</h2>
<p>Tab 1 content.</p>
</div>

<div class="tabbertab">
<h2>Tab 2</h2>
<p>Tab 2 content.</p>
</div>

<div class="tabbertab">
<h2>Tab 3</h2>
<p>Tab 3 content.</p>
</div>
</div>

Widget By TricksTutor

BarelyFitz

To Change Drive Letters

noreply@blogger.com (Anonymous) — Wed, 08 Apr 2009 07:25:00 +0000

To change drive letters (useful if you have two drives and have partitioned the boot drive, but the secondary drive shows up as "D")

Go to Start > Control Panel > Administrative Tools > Computer Management, Disk Management, then right-click the partition whose name you want to change (click in the white area just below the word "Volume") and select "change drive letter and paths."
From here you can add, remove or change drive letters and paths to the partition.

Disable Hybrid Sleep Mode in Windows Vista

noreply@blogger.com (Anonymous) — Wed, 08 Apr 2009 07:24:00 +0000

Windows Vista has a neat new feature for laptops called "hybrid sleep". Actually, Windows Vista has a neat new feature for laptops called sleep too, so I'm getting ahead of myself a bit.

Windows used to have a fairly simple hardware suspend command called "standby". However, this operation took a while to execute (both entering and exiting standby) and it was somewhat unreliable when performed repeatedly, on certain hardware or with certain applications running. Sleep is meant to alleviate these problems by just serializing the current state into memory and then shutting down all devices other than the RAM. With the OS state simmering in memory like that, entering and exiting sleep is nearly instantaneous. However, the dark side to all this is if there is a power outage while the computer is in sleep, all of the unsaved data is lost (since it just existed in memory). That's where hybrid sleep comes in.

Hybrid sleep saves the OS state into RAM, but it also writes it all to the hard drive as well (sort of like hibernate does). This ensures that even if power is lost, the data will remain. This all sounds like a good idea, but in practice it's just as slow as standby was.

Now, laptops have batteries and most of them are configured to enter hibernate when the battery dips below a certain level. This means that unless the battery is physically removed, power to the RAM is never unexpectedly cut. Thus, we don't really need the hybrid sleep feature. Unfortunately, giving hybrid sleep the pink slip is a little harder than it could be.

Step one, open up the power options setting from the control panel and select the "Change plan settings" link below the selected power plan.

Once in the resulting dialog, choose "Change advanced power settings". Now you need to scroll through the miles and miles of options to find the "Sleep" node. Expand this, and then the "Allow hybrid sleep" node below it. You should see two options, "On battery" and "Plugged in". Set both of these to "Off".

Once this is done, click "OK" and you should be all set! From now on, whenever your laptop would normally go into "Sleep" - usually when the lid is closed or when inactive for a certain time - it will enter full sleep mode, rather than hybrid sleep. And when you go to awaken it from its slumbers, it should be fully responsive within a second or two of reactivation - as opposed to the 10-15 seconds after hybrid sleep.

Speed Up Blogger Page Load Time - Compress CSS

noreply@blogger.com (Anonymous) — Wed, 08 Apr 2009 01:01:00 +0000

You have to admit, most free 3rd party Blogger templates that you download are a mess. You open up the xml file and it’s a long and ugly-looking beast of code spaghetti. If you’re like me, you prefer a nice and neat template (even though you’ll be the only one seeing it) and you’ll want to tidy it up.

Most of the code you don’t want to tinker with but the .css code (the part that styles your entire blog with images and colors) is where some people like to change font colors, sizes, or even just space it out properly so it’s important that it’s not only neatly organized, but also properly aligned.

More importantly, did you know the more lines of code your template has, the longer it takes to load in a browser? So your 1,500 lines of code in your newest Blogger template could really be much shorter in size, thus speeding up page load times for your visitors. The slower your site, the more likely a visitor will be deterred and not wait for it to load up.

So here’s a neat trick to optimize your template. You’ll want to do what’s called “COMPRESS CSS” into a much smaller format. There’s a site I use called CSSDrive that offers a free web-based CSS Compressor. All you do is select a few basic options like compression mode and comments handling and then paste in your css. The css is the code between the and tags.

Make sure you backup your template code before doing this! Some people might not like how the css looks after it’s compressed so it’s best to have a backup. You also might make a mistake and copy the wrong sections which could screw up your template code. Bottom-line, backup your template before doing this.

After you click on the “Compress-it!” button it will go through your .css code and shrinks it down. Essentially it removes unnecessary white spaces and better organizes each css element into one line. Here are the results for one of the Blogger templates I compressed.

My xml Blogger template was originally 1,567 lines of code and after the css compression was done, it dropped it down to 950. Also, some template code might be messier than others so the size decrease could potentially be a lot more.

I also just ran the normal compression mode and wanted to keep my comments so if you go with the super compact mode and strip out all comments, you can compress it even further.

This tool can be used for WordPress blogs or any other websites actually. Most of the Blogger templates I come across are the ones in need of a code clean up, however. So if you’re ready to give CSS Compression a shot, check out CSS Drive’s free tool and compress away!

How to Rename the Recycle Bin

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 21:03:00 +0000

To change the name of the Recycle Bin desktop icon, open Regedit and go to:

HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}

and change the name "Recycle Bin" to whatever you want (don't type any quotes).

Remove the Recycle Bin from the Desktop

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 20:59:00 +0000

If you don't use the Recycle Bin to store deleted files , you can get rid of its desktop icon all together.

Run Regedit and go to:

HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/explorer/Desktop/NameSpace

Click on the "Recycle Bin" string in the right hand pane. Hit Del, click OK.

Set Processes Priority in XP

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 20:54:00 +0000

Follow this tip to increase the priority of active processes, this will result in prioritisation of processes using the CPU.

On keyboard Press
CTRL+SHIFT+ESC

1.Go to the second tab called Processes, right click on one of the active processes, you will see the Set Priority option

2.For example, your Run your CDwriter program , set the priority higher, and guess what, no crashed CD’s.

Speed up browsing of Windows 2000 & XP Machines

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 20:50:00 +0000

Its a great trick with which you can speed up your browsing of Windows XP machines. Its actually a fix to a bug installed as default in Windows 2000 that scans shared files for Scheduled Tasks. And it turns out that you can experience a delay as long as 30 seconds when you try to view shared files across a network because Windows 2000 is using the extra time to search the remote computer for any Scheduled Tasks. Note that though the fix is originally intended for only those affected, Windows 2000 users will experience that the actual browsing speed of both the Internet & Windows Explorers improve significantly after applying it since it doesn't search for Scheduled Tasks anymore. Here's how :

Open up the Registry and go to :

HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace

Under that branch, select the key :

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

and delete it.

This is the key that instructs Windows to search for Scheduled Tasks. If you like you may want to export the exact branch so that you can restore the key if necessary.

This fix is so effective that it doesn't require a reboot and you can almost immediately determine yourself how much it speeds up your browsing processes.

Set the Search Screen to the Classic Look in XP

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 20:42:00 +0000

To Set the default Search Screen in Windows XP to its classic look. Just follow the following steps.

Open your Registry editor:

Start>Run>and type "regedit" with out the the " " and press OK.

Now Navigate it to:

HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ CabinetState.

Create a new string value labeled "Use Search Asst" and set it to "no".

Thats it.

Add Any Application to the Desktop Right-Click Menu in Vista

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 19:37:00 +0000

I'm going to show you how to Add Any Application to the Desktop Right-Click Menu in Vista.

If you don't know what we're talking about, I mean the menu that shows up when you right-click on the desktop:

I will show you how to add Notepad to the menu, but you could add any applications you want instead.

Step 1: Browse to the Registry Key

The first thing you'll want to do is open up regedit.exe through the start menu search or run box, and then browse down to the following key:

HKEY_CLASSES_ROOT\Directory\Background\shell

The screen should look similar to this one if you are in the right place.

Step 2: Create the Menu Item Key Name

To complete this step we'll need to create a new key, the name of which is exactly what is going to show up on the desktop menu.

Right-click on the "shell" key, and then choose New \ Key from the menu.

Give the new key the name that you want to show up on the desktop context menu. For this example we'll be using Notepad.

Optional Step: If you want to assign an "Alt" key to this menu entry for quicker access, you can change the (Default) value on the right and put an & character in front of the key you want to use. For instance, if you wanted to be able to just use the N key to launch Notepad once the desktop context menu pops up, you can do this:

Step 3: Create the Command Key

Next you'll need to create the command key that will actually hold the command used to launch the application. Right-click on the new Notepad key, and then choose New \ Key from the menu.

Give this key the name "command" in lowercase.

Step 4: Add in the Full Application Executable Path

To complete this step you'll need the full path to the application that you want to launch. You can use Shift + Right-Click to get the Copy as Path menu item to find this more quickly.

Now click on "command" on the left side, and then double-click on the (Default) key in the right side to edit the string value.

Paste in the full path to the executable that you got from the "Copy as Path" step above, or you can put in the full path yourself if you'd like.

Once it's done, it should look like this:

And right-clicking on the desktop will produce the new menu item… naturally, using this menu item should launch Notepad.

You can add as many applications to the desktop context menu as you'd like, just repeat the steps 2-4 again with a new menu item name.

Copy files faster and easier

noreply@blogger.com (Anonymous) — Sun, 05 Apr 2009 16:32:00 +0000

TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user a lot of features:

* Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives.
* Pause and resume file transfers. Pause copy process at any time to free up system resources and continue with a single click.
* Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer.
* Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files.
* Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual.
* Full Unicode support.

Download TeraCopy – Free for Home Users

TeraCopy Pro

You can also buy a Pro version of the program that lets you do the following:

* Select files with the same extension/same folder
* Remove selected files from the copy queue
* Get free updates and priority support
* More features coming soon!

Buy TeraCopy Pro – 30-Day Money Back Guarantee

TeraCopy Screenshot

Click Thumbnail To View Larger Image