Unique Kitchen Remodeling Ideas

Dining Tables

2012-10-12T17:18:00.002-07:00

Here's the tables we bought. As it turns out, with the bench it would have been better to have tables with a single base (restaurant style) instead of tables with 4 legs. You tend to hit the leg getting in and out from the bench. But, it works ok. And we couldn't find any restaurant style tables we liked. The middle table is from Circus Furniture. It's a 59"x35" cappuccino colored table. It came with the 4 chairs for $500. The other two small tables were less than $150 for the pair, ordered online from Target. They are 29.5"x29.5, and the color is espresso. The small tables are the exact same style, but just a tiny shade lighter and redder than the larger table.

Laundry Hamper in Kitchen

2012-09-23T08:27:00.003-07:00

I have the pull-out trash that originally held recycles and trash. I started using cloth napkins, and try to use washcloths instead of paper towels for a lot of things. So, I put the trash under the kitchen sink and changed one of the pull-outs to a laundry hamper.

Ikea cabinets have adjustable shelves

2012-09-17T19:46:00.001-07:00

One of the great things about Ikea cabinets is that you can add extra shelves, and the shelves are adjustable. I was able to put 4 shelves in this cabinet, and keep all my different kinds of plates separated.

It's very easy to add the shelves. There are pre-drilled holes in the cabinet that you put little metal pegs into, and the shelves rest on the pegs.

Stemware Rack

2012-09-16T07:51:00.000-07:00

Finally got the stemware rack put up! We have too many wine glasses. There are still several in the cabinet that would not fit on the rack.

See that big green box next to the refrigerator? It is a giant roll of saran wrap we bought at the restaurant supply store. We were so tired of the serrated edge that does not cut, or falls apart on saran wrap boxes. This industrial size roll of saran wrap has a slider mechanism to cut the wrap that works great! And it was a good value.

IKEA Pantry Cabinet

2012-08-19T12:58:00.000-07:00

This is the inside of our IKEA tall cabinet. It is a 80" high, 24" wide standard depth cabinet. The top shelf is fixed, but all the shelves below it pull out. The IKEA pull-out shelves are really nice!

Benches for the Dining Room

2012-08-19T12:57:00.000-07:00

My dad custom made these benches for the dining room. The lids lift up and there is storage inside! They are stained furniture grade plywood with a couple coats polyurethane. The plan is to buy 3 tables. The tables on the ends will seat 2 people, and the table in the middle will seat 4 people. There will be an aisle between the middle and outer tables.

Cutting the Capita Legs

2012-02-25T13:46:00.000-08:00

Here is a good post I found describing how to cut the capita legs to a custom length. They are somewhat adjustable, but my kitchen floor is very uneven, so they didn't adjust enough to get my cabinets level.

http://ask.metafilter.com/136107/Looking-for-metal-legs-for-monitor-stand

Kitchen Window - After Curtains

2012-02-03T21:42:00.000-08:00

My friend made the curtains. Check out her stuff on the Sew Crazy website.

Kitchen Window - Before Curtains

2012-01-15T20:57:00.000-08:00

Maytag OTR Microwave

2011-11-22T11:41:00.000-08:00

I have a Maytag model MMV5208WS stainless steel microwave. I wanted as big a microwave as I could get OTR. I initially wanted a convection-microwave combo, but I couldn't find any with great reviews. Many people complain that an OTR microwave is not reachable. However, I don't have any problems and I am average height, 5'5". It is so worth having the extra counter space.

The microwave has worked fine for me so far. The only complaint I would have is that the sensor cooking has been a little off, sometimes things cook too long and other times too short. The microwave also had a small scratch when I first got it, but I buffed it out with barkeepers friend and stainless steel polish so that it is not very noticeable now. I use the stainless steel cleaner that comes in an aerosol spray. Pretty easy to use. And I really like the barkeepers friend. It removes rust and other stains from the stainless steel very easily. Yes, stainless steel can rust and stain, if something sits on it long enough. I also use the barkeepers friend to clean my porcelain fixtures. I used to use vinegar to clean almost everything, but I learned that it is not good for stainless steel or grout.

I have the vent recirculating, and it seems to do a decent job. They recommend changing the carbon filter every six months, but I only do that once a year, and it seems to be ok. You have to take out screws to replace it, which is a little annoying.

Here is a link to the owner's manual.

Inside the Pantry

2011-11-06T11:29:00.000-08:00

This is the 80" high cabinet from ikea (pantry cabinet). It is full depth (24"). I have it on one end of the run of cabinets, next to the refrigerator. Most of the shelves pull out, which is nice. Ikea makes a bunch of different organizers and pull-outs for their cabinets.

Porcelain Tile Countertop Installation

2011-11-02T17:52:00.000-07:00

I purchased a tilesaw from Harbor Freight to cut the tile, a Chicago brand bridge wet saw that could handle 24" tiles. I didn't use the included blade, instead I bought a more expensive diamond blade specifically designed for porcelain.

The tiles are through-bodied (color goes all the way through the tile, not just on the surface), and rectified (edges are exactly straight). Not all ceramic/porcelain tile has these properties. You cannot do the 1/16" grout lines without rectified tile. You must also use non sanded grout for the thin grout lines.

We had a problem cutting the tile. It seemed that no matter what we did, the cut curved slightly toward the end of the cut. The curve was very slight, but it was enough to mess up the cuts because we had such narrow grout lines. We thought the problem was with the saw, so we rented a wet saw from home depot, but we had the same problem. I think if I did this over again I would try a score and snap tile cutter. Also, maybe I would use smaller tiles and live with the extra grout lines. The large format tiles were very difficult to work with.

After the grout set, we had the efflorescence issue, which can arise with colored grout. We waited more than the 2 days recommended between tiling and grouting. I tried removing with sulfamic acid, and it helped some. I thought it looked pretty bad at first, but actually it is not noticeable because of the color variations in the tile. Here is a good website about causes of efflorescence. I think that my problem may have been prevented by using distilled water to mix the grout.

Peninsula: Kitchen Side

2011-10-30T22:27:00.000-07:00

There are drawers on the right, 30" wide. Left of that is a 15" wide cabinet with drawers which contains a pull-out trash. To the left of the trash cabinet, hidden in the corner to the side of the dishwasher, is a 24" cabinet which is turned toward the bar side. I didn't want any blind corner cabinets.

Below is a picture of the inside of the ikea drawers. Ikea sells nice drawer dividers so that stuff doesn't slide around a lot when opening and closing drawers. The drawers are pretty deep. You can see that I have a pitcher in the bottom drawer.

Peninsula: Bar Side

2011-10-25T15:27:00.000-07:00

Here is the raised bar side of the peninsula. The raised bar is close to standard bar height of 42". All of the parts that are painted grey are made of plywood. I used the Ace brand of high gloss paint, painted to match my roll-out set of drawers, which you can barely see the top of in the back corner of the kitchen.

The little shelving area serves as a support for the bar overhang (which is a 12" overhang). The shelving is stained the same color as the cubby hole next to the butcher block. I wanted these shelves so I could have somewhere to store my cookbooks. Also on the wall end is a cabinet. It is a standard IKEA cabinet which is turned to face the dining room. The door is custom made to look the same style as the IKEA doors. The cabinet has extra depth because of the depth of the knee wall. Below is a picture of the inside of that cabinet. The area around the knee wall was framed in and stained to match the inside of the IKEA cabinet.

Pull-out Trash

2011-10-18T14:27:00.000-07:00

IKEA didn't make a pull-out trash system that was big enough for me. This particular one includes two 35qt trash cans, so I can have one for trash and one for recycling. The system was attached to the standard IKEA door. I believe the one I purchased is the Knape and Vogt brand. Rev-A-Shelf also makes pull out systems as well.

One thing that really bothers my husband about the configuration is that the dishwasher is in the same corner as the trash. Often you find that you want to access the trash while the dishwasher is open.

In my initial design, I had the trash to the left of the sink, but I wanted the cabinet in that spot to be on casters so I could slide it out from under the counter in order to access the back corner. I have another post about that. I could have had the trash in a moving cabinet, but I was afraid that the cabinet would try to move if there was heavy stuff in the trashcan, even though I had locking casters. Now, I don't think that would have been a problem, because the I never even lock the casters on the cabinet that is there now, and it doesn't want to move when opening drawers. Also, I thought that the cabinet to the left of the sink would be visually more appealing to be drawers, vs a cabinet door, because it is also a different color and and a different height than the other cabinets.

The other spot the trash could have gone to is the end of the peninsula (trade it with the set of drawers). This would have put it far from the sink, but I think in hindsight it may have been the best option. It is nice having the trash beneath the butcher block, because a lot of food trash is generated there.

My Refrigerator "Spice Rack"

2011-10-11T23:15:00.000-07:00

I originally wanted a spice rack to hang on the wall, to save space. Then I thought to stick my spices to the refrigerator using magnets. I bought the magnets online from Applied Magnets. They were pretty cheap, so I bought a bunch of them. I used small neodymium disc magnets (rare earth magnets). I used two or three for each spice container. I just use tape to attach the magnets to the container. When the spice runs out, I take the magnets off and tape them to the new container.

Ideally, spices shouldn't be exposed to sunlight. The side of my fridge only gets some indirect light, so I think it is probably ok.

The Porcelain Tile Countertop Edge

2011-10-07T15:13:00.000-07:00

The edge of the porcelain tile is a basic butt joint. We discovered that cutting theses 24" tiles was very tricky, so we didn't attempt anything fancy. The tile is through bodied, so the color runs all the way through the tile. You can see though, that the pattern is a little different on the cut edge of the tile,and also more matte. We tried to polish that edge to make it as shiny as the face of the tile, but the polisher had little effect. A rotary sander was used with a polishing pad purchased from the tile store. A coarse grit polishing pad was used to very slightly round the edges so they wouldn't be sharp.

I considered a Schluter edging but decided against it partly because of the expense, and partly because it is permanently embedded into the tile. I was afraid that the metal edging could become damaged and there would be no way to replace it short of ripping out tiles.

The Cubbyhole on the Peninsula

2011-09-26T15:00:00.000-07:00

I wanted to incorporate a butcher block counter top on the peninsula, but I did not want some awkward spot where the two different counter top mediums joined. So...I designed the peninsula so that a raised L-shape at bar height would surround a standard counter top height butcher block section. I decided to use that little bit of extra space as a cubbyhole for my husband's marble pastry board. That sucker is HEAVY, so it is nice to be able to slide it out onto the butcher block. There's actually a little extra space in there. I also store a rolling pin, a few very long grill utensils, and the scraper that I use to clean the butcher block. I considered having the butcher block extend into the cubbyhole, but then decided that I didn't want to have anything installed directly on the butcher block. The way the butcher block is installed, it is relatively easy to remove. I actually use it for cutting stuff on, so someday I may want to flip it over to get a new clean surface, or replace it altogether.

The bottom of the cubbyhole is tile, level with the adjacent countertop. The sides and back of the cubbyhole are made of wood, the exterior is painted high-gloss grey like the butcher block backsplash, and the interior is stained. The top of the cubbyhole is tile, and level with the bar height counter top.

You can see pretty well in these pictures that there are actually 3 counter top heights. The lower tile counter top height is just over 37" high. I can't quite remember why we couldn't make it 36"...probably because of the roll-out grey cabinet. Then we put the bar height at just over 42" to get close to the standard bar height. We had to make the butcher block the standard 36" instead of making even with the lower tile counters so we could have room to fit the electrical outlets on the backsplash behind the butcher block. This was a last minute design change, because I hadn't allotted enough space for the outlets. Originally, I wasn't going to put outlets, but code says they have to be there every 4 feet or something ridiculous like that anywhere there is a kitchen counter top. They don't want anyone having to use an extension cord to plug in an appliance. I will probably never even use those outlets.

As it turned out, I like the look of the 3 different levels of counter top, and since the butcher block is used for cutting, it is more comfortable to have it at the standard 36" height.

Raising the Ikea Pantry Cabinet (High Cabinet)

2011-09-16T00:09:00.001-07:00

The pantry cabinet needed to be raised by about 3/4 of an inch beyond what my 6 inch capita legs would allow. A 3/4 inch block of plywood was put above each leg. A deco strip was put beneath the cabinet to hide the plywood. Because this cabinet is not right next to any other cabinet, you don't notice the difference. I could have also gotten the 8 inch capita legs and cut them, but the closest Ikea is about 2 hours from my house, and it wasn't worth going back to get different legs. I would have wanted to have the deco strip anyway, because the legs would have looked so much longer than the other legs in the kitchen.

I see on the IKEA FANS forum that others also need to raise the pantry cabinet.

One of the reasons the cabinet needed to be raised was because when the cabinet above the refrigerator was lined with the top of the pantry, the space for the refrigerator was too short. Ikea only makes a 15 inch tall wall cabinet for over the refrigerator. Many other cabinet manufacturers make a 12", which would have allowed for the refrigerator to fit.

Increasing the height of the upper cabinets also allowed for more space between the counter top and the bottom of the upper cabinets. I have 18 1/2" space, which works well. I think the standard is 18". Without the extra 3/4" it would have been less than 18", and I may have had an issue fitting my blender on the countertop underneath the upper cabinets.

Ikea Cabinet on Casters

2011-09-15T23:08:00.000-07:00

I wanted a roll-out piece in order to access the corner space. Ikea doesn't make castors for the Akurum line of kitchen cabinets. I bought the casters at Ace Hardware. I think they were rated for 75 pounds or something. This small cabinet wasn't intended to hold anything too heavy, and the butcher block top is not that heavy. I needed casters small enough that the cabinet would still clear under the counter top. I was all set to go to a specialty caster store, but the owners were on vacation and I was too impatient. I probably could have gotten heavier duty casters that would have been a small enough diameter.

I have braking casters for the front two, although I haven't needed to actually use the brakes -- it's been at least 6 months now I think. The weight of the cabinet seems to hold it in place fine if I am just opening drawers. You may notice I got a different style than the rest of the cabinets. That is because the casters are shorter than the legs (so that the cabinet will roll under the counter top), cabinet doors/drawer fronts don't line up. I thought it would look strange for 2 Adel style cabinets to be side-by-side and not line up, so I went with a totally different style (ABSTRAKT high gloss gray).

One of the casters is screwed directly to the cabinet. The other 3 are shimmed so that the cabinet sits level in its space. My floor is not at all level. This means that when the cabinet is rolled out, it is not level. But there's nothing to be done about that...my floor is the problem there. This has worked out very well, although I would be hesitant to try it on a bigger cabinet, or for a cabinet that was to carry a heavy load.

The Venetian Plaster Backsplash

2011-09-13T08:27:00.000-07:00

The picture above shows what the Venetian Plaster looks like. I got Valspar (the Lowe's brand), which is not truly Venetian plaster, but a "faux Venetian plaster". As you can see there is some subtle texturing, and even more subtle color variation. I applied 3 layers of the plaster with the venetian plaster spatulas sold at Lowes. It was actually not too difficult, and only used about half a gallon of the plaster. It made for a cheap backsplash, less than $100 altogether. I'm mostly happy with it.

I did not burnish, which would have caused more color variation. I did a trial patch which I burnished, but it looked really terrible. I tried with the plaster tools, sandpaper, and with a stainless steel trowel. Beware using regular stainless steel with the venetian plaster, because it leaves dark marks. I guess that is why the venetian plaster tools are all made from some kind of blue steel. The burnished portion that I tried did not look like any of the pictures of venetian plaster that I have seen, and I'm not sure what I may have done wrong. It looked really streaky and harsh, not at all marble-like.

Valspar makes a protective coat for the plaster, but I did not use it. I bought some, and tested it out. I think it is intended for walls that would not be washed frequently, because when I tried washing the area where I used the Valspar protective coating, the water soaked through the finish and some plaster rubbed off as well. Instead, I used Seal-Krete high gloss Showroom Finish, which is a concrete floor coating. I can wash the wall, and the plaster is not affected. It also made the plaster nice and shiny.

I have had two problems with the plaster. First, a piece chipped off behind the sink. I think perhaps a utensil may have gouged the wall. I tried several times to patch the spot (I have plenty of leftover plaster and seal-krete), but there was no way to make it look nice. It was always an obvious and ugly patch spot. This may be where more variation in color would have been good, because maybe it would be easier to conceal patch spots. Eventually I gave up and we put up a stainless steel backsplash. There is a picture and description of that here: http://uniquekitchenideas.blogspot.com/2011/09/kitchen-overview-east-wall-stainless.html

Below you can see the second problem I have had with the venetian plaster backsplash. There is a bump in the wall. I suspect it is a drywall screw that somehow decided to back out. I've got 2 pictures below, the bottom one is a close-up. I have no idea what to do to fix this. I have already determined that a patch will not work, so I can't chip away at it and put the screw back in. It's also not really in a nice spot to put another stainless backsplash in. It's pretty close to the sink, under the paper towel dispenser. For now, I just put something in front of that spot to hide it.

Update Dec 2014: It has now been a few years, and besides the initial problems mentioned, the backsplash is holding up very well. After the first 2 years, I re-coated with the Seal-Krete high gloss Showroom Finish to keep it protected.

Solving the Corner Cabinet Dilemma

2011-09-09T16:38:00.000-07:00

I hate to have wasted space in the corner. Usually the solution to a corner cabinet is either a blind cabinet, which makes it very hard to get into the back corner, or some type of lazy susan which wastes a lot of space. I put a partially hidden cabinet in the corner. The grey cabinet was put on casters so that it rolls out easily. I'll talk about that cabinet more in a future post. In the opposite corner (no picture), I have the wine fridge on sliders so that it pulls out easily as well.

Even without moving the grey set of drawers, I can get into the corner cabinet to access some pans.

The corner cabinet was made from a regular ikea base cabinet frame, and the door is a 12" ikea door to match the rest of the doors, but it slides instead of opening on hinges. Instead of a handle like the other cabinets, this one has a knob purchased from Home Depot. I put stuff in the back of this cabinet that I don't need to get at very often, like these large bags of rice and flour. The divider that the pans are leaning against was purchased from Ikea.

The picture above is a close-up of the bottom track. It is made of wood, and waxed with Johnson Paste Wax. The door slides pretty easily in the track. The picture below is of the top of the door.

The Peninsula & The Butcher Block Countertop

2011-09-08T18:31:00.000-07:00

The south edge of the kitchen is bordered by a peninsula. The peninsula consists of two sections. The section with the butcher block is regular counter height (36"). The raised L-shaped section with the tile is 42" high (standard bar height). The lower part of the peninsula consists of ikea cabinets, with the butcher block countertop affixed to the top. The cabinets extend all the way back to the east wall. The raised portion was custom built from plywood, and painted with a high-gloss grey paint (to match the grey pull-out drawers on the east wall). I was originally going to try to put venetian plaster over the plywood instead of painting it, but after working with the plaster I figured it probably wouldn't go over plywood easily, and I was afraid it would flake off or something. You can see a cubby hole at the far end of the butcher block. There will be further details on that in a later post.

The maple butcher block was purchased from Lumber Liquidators. I purchased an 8 foot section for $259, but I only needed about 4 feet. I used some of the remainder to top the grey pull-out drawers on the east wall. I use the butcher block as a cutting board. It works really well. It's easy to clean (scrape off the food bits, spray with vinegar, and wipe down). About once a week I oil it with food grade mineral oil. You don't need special butcher block oil. It is much cheaper to get at the drug store or grocery store. They even have it at Target. But you have to look in the medicine section with the laxatives, because it is sold as an "intestinal lubricant". You can buy a 16 oz bottle for as cheap as a couple bucks.

Kitchen Overview - East Wall & The Stainless Backsplash & the Dishwasher

2011-09-05T20:37:00.000-07:00

The east wall has the a stainless steel sink with satin nickel faucet, dishwasher, and a set of drawers that roll out from under the counter (more on that in a later post).

Most of the backsplash is the Venetian plaster. However, the constant water and abuse from the area where the sink is created a blemish, and we decided to add a stainless backsplash for behind the sink. My husband went to a metal shop and they made a thin sheet to our specs for about $20. It was really much cheaper than I had imagined. I don't know that I would want the entire backsplash to be stainless steel, because of the difficulty keeping it clean, but for the area behind the sink it really works well.

The dishwasher is a Bosch, one of the quieter models. My husband wanted an Asko, but I didn't want to spend that kind of money. I found that if I used cheap dishwasher detergent that the dishes didn't clean well (the Kirkland liquid stuff). We buy those Finish tablets, and they seem to work pretty well. But now I have 2 huge bottles of the Kirkland. I use it sometimes if I have a load of dishes that isn't very dirty. Also, when the dishwasher is done, many dishes usually aren't all the way dry. This is the first dishwasher I've ever had, so I don't know if that is normal or not.

Kitchen Overview - West Wall & The Refrigerators

2011-09-04T22:56:00.000-07:00

On the west wall, there is a 24" wide 80" tall full depth pantry cabinet. I have one of those removable 3M Command hooks holding the apron on the side. There's room for some storage above the cabinets. I put some liquor bottles and a basket up there. You can see some of the cabinets on the north wall that are a little higher (at the 88" level). The ceiling slopes up, so we could go higher with the cabinets on the north wall.

We have a an EdgeStar 30 Bottle Built-In Wine Cooler Refrigerator under the counter in the corner. The fan seems to cycle on and off quite a bit, but I emailed the company and they said that it is supposed to work that way. It's a little noisy, but I don't notice it anymore.

The refrigerator is a Frigidaire Gallery FGHB2844LE2 french door model. I'm not sure I'm thrilled with the french door style. I got it because I dislike side-by-sides and I wanted the water & ice dispenser option, which doesn't tend to come on top/bottom freezer styles. Also, we wanted a large refrigerator, and the largest tend to be french door models. A left-hinged door would have been better, since the counter is to the right of the fridge. With the french doors, you kinda want an island or something where you can put stuff when loading/unloading the fridge.

The ice/water dispenser: The crushed ice isn't very crushed, but it is crunched a bit. The water works great, it reminds you when to change the filter as well. The ice dispenser doesn't dispense very fast, and jams up occasionally.

I wish I hadn't gotten a refrigerator with the smooth/shiny finish. It shows smudges and fingerprints easily. But the rougher finish isn't so popular anymore. I guess the textured finish on a refrigerator just isn't considered stylish. Everything has to be shiny & sleek now. The black plastic drip tray below the dispenser also shows water deposits pretty badly. I would pay a few bucks if I could get a drip tray made of stainless or maybe some kind of ceramic or glass. It's just so difficult to clean the hard water deposits from plastic.