tag:blogger.com,1999:blog-27220191912016509812025-04-05T04:12:52.830+03:00A blog by latheefp@gmail.comAbdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.comBlogger73125tag:blogger.com,1999:blog-2722019191201650981.post-63994496068477126692018-06-29T10:50:00.002+03:002018-06-29T10:50:40.568+03:00

Zone Configuration:  Zone root volume is on zfs block device.Zpool is on shared disk. -bash-4.4# zonecfg -z mprs023 export create -b set brand=solaris-kz set autoboot=true set autoshutdown=shutdown set hostid=0x2279686c add anet set lower-link=net0 set configure-allowed-address=true set link-protection=mac-nospoof set mac-address=auto set vlan-id=208 set id=0 end add anet set lower-link=

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-58677400326695446892017-11-30T01:02:00.000+03:002017-11-30T01:02:07.127+03:00

In solaris 11, its not recomented to edit resolv.conf file directory. Below is the proceedure to configure it. Ensure, DNS client service is online. [code] root@eecsaruh2hoc007 # svcs -a | grep dns disabled       Jun_25   svc:/network/dns/multicast:default disabled       Jun_25   svc:/network/dns/server:default online    &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-37396851714050404202017-11-01T23:27:00.003+03:002017-11-01T23:27:51.748+03:00

Use below single command to create SSL self signed certificate and key. openssl req  -nodes -new -x509  -keyout yum.prod.example.lan.key -out yum.prod.example.lan.cert Once created, this certificates can be used in ssl.conf like below. NameVirtualHost *:443 ServerAdmin unixadmin@example.com.sa ServerName yum.prod.example.lan SSLEngine on SSLCertificateFile /etc/httpd/

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-77300188822277564772017-11-01T23:24:00.001+03:002017-11-01T23:24:17.669+03:00

Script. domain=`virtinfo -c current get -H -o value domain-name` for device in `ldm list-io|grep IOVFC.PF|egrep $domain|awk {'print $1'}`;  do         #echo "ldm list-io -l -p $device|grep type=PF|awk -F\| {'print $2'}|sed 's/dev=//g'"         dev=`ldm list-io -l -p $device|grep type=PF|awk -F\| {'print $2'}|sed 's/dev=//g'`       &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-25203558158851227482017-11-01T23:22:00.001+03:002017-11-01T23:22:29.176+03:00

How to find the model. Get the PCIO slot of HBA adaptor root@eecsaruh6hoc007 # ldm list-io|grep IOVFC|more /SYS/IOU0/PCIE4/IOVFC.PF0                  PF     pci_0    primary /SYS/IOU0/PCIE4/IOVFC.PF1                  PF     pci_0    primary /SYS/IOU0/PCIE2

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-51154371500929408812017-11-01T23:20:00.001+03:002017-11-01T23:20:19.642+03:00

First list out the number of Hosts. -> show HOST  /HOST0     Targets:         VPS         VPS_CPUS         VPS_FANS         VPS_MEMORY         bootmode         console         diag         domain      

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-72698093742565032182017-11-01T23:19:00.000+03:002017-11-01T23:19:06.290+03:00

zfs set refreservation=40G rpool/dumpzfs set quota=40G rpool/dumpzfs set volsize=40G rpool/dump

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-70679369234960036262017-11-01T23:17:00.000+03:002017-11-01T23:17:32.435+03:00

In solaris 11, its not recomented to edit resolv.conf file directory. Below is the proceedure to configure it. Ensure, DNS client service is online. root@eecsaruh2hoc007 # svcs -a | grep dns disabled       Jun_25   svc:/network/dns/multicast:default disabled       Jun_25   svc:/network/dns/server:default online      &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-66078569546906501302016-01-22T20:42:00.000+03:002016-01-22T20:42:30.460+03:00

I found some of very good article in internet for configuring dynamic IP configuration with Godaddy. Below is the steps I used to achieve the same. 1- Install required python modules.   #yum install install python python-pip   #pip install pif   #pip install pygodaddy   #pip install pyopenssl ndg-httpsclient pyasn1 2. replace client.py and __init__.py  with below

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-52325526758595260502015-02-17T15:34:00.000+03:002015-02-17T15:34:14.420+03:00

This script can be used for changing the password of Solaris system trough non-interactive script. This can be run like #/var/tmp/changepass.sh username password Same script can be downloaded here #!/usr/bin/bash #owner:platheef@gmail.com #Purpose:changing Oracle Solaris password using script.  TS=`date +"%h-%d-%H-%M-%S-%Y"` SHADOW=/etc/shadow x="" passtxt=$2; user=$1; if [ "$x$

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com1tag:blogger.com,1999:blog-2722019191201650981.post-29837141673271887602014-12-05T17:44:00.000+03:002014-12-05T17:44:48.165+03:00

Here I explain how to configure logadm to rotage any system wide files according to given criteria. 1. Add the corresponding entries in /etc/logadm.conf in below format. root@server1 # tail -3 /etc/logadm.conf /var/adm/wtmpx -A 1m -o adm -g adm -m 664 -p 1d -t '$file.old.%Y%m%d_%H%M' -z 1 /var/adm/wtmpx -A 1m -g adm -m 664 -o adm -p 1w -t '$file.old.%Y%m%d_%H%M' -z 5 /var/adm/utmpx -A 1m -g adm

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-4484902907249159222014-06-23T13:41:00.002+03:002014-06-27T20:03:58.445+03:00

When you save your data to DB using Model, some time if fails without any message, you can use codes to check what is happening. If the save fails, you will get print of data, validation error if any, and SQL statement executed. $data=$this->data;  if ($this->Client->save($data)) {      $this->Session->setFlash("Client Added");      $this->

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-43323805162437097902013-05-17T00:42:00.001+03:002013-05-17T00:42:23.156+03:00

Interface configuration files. root@node055 # cat /etc/hostname.nxge3 node055 netmask + broadcast + group production up root@node055 # cat /etc/hostname.nxge9 group production standby up VCS Configuration File Entry (main.cf) group Multinic (         SystemList = { node055 = 0, node056 = 1, node057 = 2, node058 = 3,               &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-12306820207766768162013-05-16T23:52:00.000+03:002013-05-16T23:52:28.848+03:00

Check all your network interfaces using ethtool command [root@MyLinux ~]# ethtool eth0 Settings for eth0:         Supported ports: [ TP ]         Supported link modes:   10baseT/Half 10baseT/Full                                 100baseT/Half 100baseT/Full     &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-90833791462059881942012-11-26T21:08:00.001+03:002012-11-26T21:09:21.997+03:00

Install uif2iso package using apt-get install [code] root@shimna:/home/data/CBT/php.iso# apt-get install uif2iso Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed:   uif2iso 0 upgraded, 1 newly installed, 0 to remove and 68 not upgraded. Need to get 40.4 kB of archives. After this operation, 135 kB of

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-32595814174137644932011-07-16T22:15:00.001+03:002011-07-16T22:16:36.418+03:00

  Hostname:node1 Resource Group Name:db-rg Resource Name: apps-res Requirement: Need to add two new mount points /oracle/redo1   and /oracle/redo2. 1. List the existing mountpoint related to db-resroot@node1 # scrgadm -vvp|egrep 'FilesystemMountPoints'|grep 'db-res'|grep 'Res property value'      (db-rg:db-res:FilesystemMountPoints) Res property value: /

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-54259587743272181952011-04-19T13:04:00.001+03:002011-04-19T13:04:19.693+03:00

1.Rescan SCSI Bus to detect newly added disk using below command. [root@RHEL ~]# echo "- - -">/sys/class/scsi_host/host*/scan 2. Tail system message file for checking the newly added disk is probed.[root@RHEL ~]# tail -f /var/log/messagesMar  6 16:34:56 RHEL kernel: SCSI device sdc: 545259520 512-byte hdwr sectors (279173 MB)Mar  6 16:34:56 RHEL kernel: sdc: cache data unavailableMar

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-87116717741637748662011-04-16T15:51:00.001+03:002011-04-16T15:51:26.938+03:00

The script prints the WWPN of Solaris 10 HBA cards WWPN in a familiar colon separated format that Storage Admin can use easily in SAN devices. root@solaris-10 # fcinfo hba-port|grep 'HBA Port WWN'|awk {'print $4'}|perl -pe 's/(..)/\1:/g'|cut -c 1-2321:00:00:1b:32:95:56:2c21:01:00:1b:32:b5:56:2c21:00:00:1b:32:95:66:2c21:01:00:1b:32:b5:66:2c

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-5400553633921792752011-04-12T10:43:00.001+03:002011-04-12T10:43:37.067+03:00

  #Source DirectorySRC=/apps/temp#Specify size of file system in percentage when the script work. Nothing will happen if the FS utilization is below this.CUTOFF=15#Specify the age of file to be moved (older than this)OLD=14TS=`date "+%Y_%m_%d_%H:%M:%S"`#location of LogfileLOG=/tmp/mvfile.$TSX=`df $SRC |grep -v Used|awk '{print $4}'|cut -c1-2|grep -v ^$` if [ -f  $LOG ]  &nbsp

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-23324208472776077272011-04-11T12:43:00.001+03:002011-04-11T12:43:10.876+03:00

  Since /usr is will be read-only on zone, its not possible to do any changes on sudo configuration from shared zones. Use visudo command from global zone for below tasks. 1. Create alias for each zones with corresponding hostnames. Host_Alias ZONE1=zone1.example.comHost_Alias ZONE1=zone2.example.com 2. Use above alias for each line as below (user1 has privileges for below command on zone1

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-30920010992452538292011-03-26T16:46:00.001+03:002011-03-26T16:49:43.019+03:00

  Here is the procedure for detaching one system board (SB13 from one domain (say Domain A) and adding the the same with another Domain (Domain F). 1. Make sure the board is available in Domain A root@Domain-A # cfgadm -al|grep SB13Ap_Id                          Type&

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-61131426579368567112011-03-19T21:15:00.002+03:002011-03-19T21:22:00.562+03:00

Set up details:  Server: globalzone Zone name: testzone 1. Creating testpool named testpool with two disks in global zone root@global # testpool create testpool  c4t60050768018E8327B800000000000005d0s0 c4t60050768018E8327B800000000000008d0s0  2. Checking the status of created pool testpool  root@global # zpool status -v testpool  pool: testpool  state:

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-1732442133126020882011-03-19T12:05:00.006+03:002011-06-30T14:09:33.780+03:00

This is script is for printing the EMC psedo device with corresponding LUN ID and physical device path. Make sure, powermt command is in your env path. Download the script Click Here #!/usr/bin/perl #Auther : Latheefp@gmail.com #Purpose: Printing the Emc Power Devices With LUN ID my $PSUE; my $LUN; my $DISK; my @array; my $PHY; my $OldPSUE; my $count; my $LEN; print "======================

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-30816762811237573282011-03-02T12:25:00.001+03:002011-03-02T12:31:25.783+03:00

Listing files Related to one installed RPM. Command: rpm --query --filesbypkg  Eg:to list all the files related to installed rpm mysql-5.1.51-2.fc14.i686 [root@latheefTest /]# rpm --query --filesbypkg  mysql-5.1.51-2.fc14.i686|more mysql                     /usr/bin/msql2mysql mysql             &

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0tag:blogger.com,1999:blog-2722019191201650981.post-27627873343048496872011-02-22T21:30:00.003+03:002011-02-22T21:34:24.062+03:00

Renaming VG in hpux. Here is the procedure for renaming a VG in hpux. Renaming a VG is simple as exporting the the VG as importing with different name. (eg: vgapp to vgdb) 1. Verify the existing configuration #vgdisplay vgapp VG Name                     /dev/vgapp VG Write Access             read/

Abdul latheef phttp://www.blogger.com/profile/08678922523845681482noreply@blogger.com0